Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
CAPNOSTAT® 5 MAINSTREAM CO2 SENSOR21st Century CO2 Technology™ for mainstream CO2 monitoring
in critically ill, intubated patients.
The CAPNOSTAT 5 Sensor is the ideal capnography
solution for your patient monitoring system. It
provides technologically advanced measurement of
End-Tidal Carbon Dioxide (ETCO2), respiration rate,
and a clear, accurate capnogram at all respiratory
rates up to 150 breaths per minute.
The CAPNOSTAT 5 Sensor is:
• Flexible • Compact
• Reliable • Affordable
The CAPNOSTAT 5 can be combined with other
components and software to provide respiratory
monitoring capabilities that are comprehensive, yet
remarkably flexible.
IT’S ALL INSIDE!As the recognized global leader in capnography,
Respironics has been providing innovative and cost-
effective products to OEM customers for over
18 years. Now, our engineers have developed a new
miniature PC board that puts all measurement and
analysis functions right inside the sensor head. This
keeps costs and space requirements down by elim-
inating the need for a PC board inside your monitor.
The data output is a simple RS232 signal, so it’s a
snap to integrate the new CAPNOSTAT 5 Sensor
into your patient monitoring system. We also use
the very latest Digital Signal Processor (DSP) for
reliable and flexible analog-to-digital conversion.
8 0 0 . 2 4 3 . 3 4 4 4 O P T I O N 3 W W W . O E M . R E S P I R O N I C S . C O M 2 0 3 . 6 9 7 . 6 4 8 8
Transducer Type Mainstream CO2 Sensor
Principle of Operation Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts
Initialization Time Capnogram, displayed in less than 15 seconds at an ambient temperature of 25ºC, full specifications within 2 minutes
CO2 Measurement Range 0 to 150 mm Hg, 0 to 19.7%, 0 to 20 kPa (at 760 mm Hg) Barometric Pressure supplied by host
Rise Time Less than 60 ms - Adult Reusable or Single-Patient-Use Airway Adapter Less than 60 ms - Infant Reusable or Single-Patient-Use Airway Adapter
CO2 Resolution 0.1 mm Hg 0 to 69 mm Hg0.25 mm Hg 70 to 150 mm Hg
CO2 Accuracy 0 – 40 mm Hg ±2 mm Hg41 – 70 mm Hg ±5% of reading71 – 100 mm Hg ±8% of reading101 – 150 mm Hg ±10% of reading
CO2 Stability Short Term Drift: Drift over four hours shall not exceed 0.8 mm Hg max.Long Term Drift: Accuracy specification will be maintained over a 120-hour period
CO2 Noise RMS noise of the sensor shall be less than or equal to 0.25 mm Hg at 7.5% CO2
Respiration Rate Range 0 to 150 Breaths Per Minute (BPM)
Respiration Rate Accuracy ±1 breath
Compensations Barometric Pressure 400 mm Hg to 850 mm Hg (Supplied) Operator selectable O2, N2O, HE and Agent compensation.
Calibration No routine user calibration required. An airway adapter zero is required when changing to a different style of airway adapter.
Airway Adapters Single-patient-use or reusable, < 5 cc dead space (adult), < 1 cc dead space infantAdapter taper meets ISO 5356-1
Voltage Requirements +5.0 VDC, 1.125 W Typical, 1.5 W Maximum.
Power Rating Rated input: 1.1 Watts typical. Steady StateUp to 1.5 Watts maximum on power up (warm up)
Interconnection Standard – Lemo Redel 8-pin plastic, Material PSUSensor Plug: PAB.M0.8GL.AC39GZBend Relief: GMA.1B.030.DJHost Receptacle: PKB.M0.8GL.LJ
Note: LoFlo and Pin out: CAPNOSTAT are 1 VA 5.0Vinterchangeable with 2 Shield Shieldthe host monitor. Either 3 DGND Digital returndevice may be connected 4 VSRC 5.0Vand used via the RS232 5 TxD Serial data from CAPNOSTATconnector. 6 RxD Serial data from Host
7 AGND Analog return8 SYNC Waveform Synchronization
Temperature and Humidity Operating: 0 to 45ºC, 10 to 90% RH, non-condensingStorage: -40 to 70ºC, <90% RH, non-condensing
Water Resistance IPX4 – Splash-proof (sensor head only)
Shock Impact EN60068-2-6 Sinusoidal VibrationEN60068-2-27 ShockEN60068-2-64 Random VibrationAble to withstand repeated 6-foot drops onto tiled floor while operating
Data Interface RS232 compatible, bi-directional, 19200 Baud, Standard N-8-1.
Data Output CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, Respiratory RateGas and barometric pressure compensated when supplied by host
Regulatory Designed to meet IEC 60601-1-2, EN55011 – CISPIR 11 Class B (Radiated and Conductive Emissions), IEC 61000-4-2 Electrostatic Discharge Immunity, IEC 61000-4-3 Radiated Immunity, Designed to comply with 93/42/EEC (MDD CE Marking), FDA Standards, ASTM F1456-01 Minimum Performance and Safety Requirements for Capnometers and ISO21647. Medical Electrical Equipment performance requirements for the basic safety and essential performance of respiratory gas monitors.
Specifications are subject to change without notice.
CAPNOSTAT® 5 MAINSTREAM CO2 SENSOR – SPECIFICATIONS
GO MAINSTREAM
The CAPNOSTAT® 5 Sensor is designed for
mainstream measurements using sophisti-
cated infrared absorption spectroscopy
to measure ETCO2. With mainstream,
measurements are taken directly at the
patient’s airway, so response is faster and
there is less chance of erroneous, artifact
data. The analyzer portion of the sensor
cannot be contaminated with patient
secretions, and there are no pumping
or pneumatic components to replace.
Maintenance requirements and overall
cost-of-ownership are minimized. Our
exclusive family of airway adapters are
easy to use and durable enough even for
long-term ventilator patients. Yet, they are
inexpensive and disposable.
The CAPNOSTAT 5 Sensor can be inte-
grated with other components, software
packages and accessories, making it
easy for you to configure your patient
monitoring systems with state-of-the-art
respiratory management and analysis
technology now and into the future.
COMPLETE OEM SOLUTIONS
The CAPNOSTAT 5 is just one of many
solutions we offer to our OEM customers.
Respironic’s comprehensive engineering
team customizes innovative products to
meet customer requirements and provides
clinical and marketing support to help
meet the growing needs of your business.
Customer Service: 1-800-243-3444, option 3 or 203-697-6488www.oem.respironics.com
Respironics, CAPNOSTAT and LoFlo are registered trademarks and 21st Century CO2
Technology is a trademark of Respironics, Inc. and its affiliates.
CAUTION: U.S. federal law restricts this device to sale by or on the order of a physician.
©2007 Respironics, Inc. and its affiliates. All rights reserved.
Geyer KB 7/10/07 MCI 4101194