CAR AUDIO 2006 - vzdy.sk · CAR AUDIO 2006 JBL, Incorporated HCGI, 2 route de Tours 72500 Château de Loir, France ... 36 GTO SUBWOOFERS 38 GTO SUBWOOFER ENCLOSURES 40 GTO COMPONENT

CAR AUDIO2006

JBL, IncorporatedHCGI, 2 route de Tours72500 Château de Loir, France

250 Crossways Park DriveWoodbury, NY 11797 USAwww.jbl.com

THE OFFICIAL BRANDOF LIVE MUSIC.

JBL, Harman International, Crown, Power Series,Grand Touring, Differential Drive and Plus Oneare trademarks of Harman InternationalIndustries, Incorporated, registered in theUnited States and/or other countries. BassPro,Symmetrical Field Geometry (SFG), I-Mount, My-Ti, HCL, Starfish and Unipoint are trademarksof Harman International Industries, Incorporated.

Kevlar, Nomex and Mylar are registeredtrademarks of E.I. du Pont de Nemoursand Company.

THX is a registered trademark of THX Ltd.All rights reserved.

Features, specifications and appearance aresubject to change without notice.

Designed, edited and digitally produced byHarman Consumer Group Marketing & DesignCenter, Woodbury, NY, USA.

© 2006 Harman International Industries,Incorporated. All rights reserved.Part No. JC-FULLLINE06 EN Printed in France 3/06

WW

W.J

BL.C

OM

THE WORLDWIDE AUTHORITYIN AUDIO REPRODUCTIONFOR MORE THAN 60 YEARS.

If you’ve experienced the all-out excitement of a blockbuster film in a THX®-certified movie house like theSamuel Goldwyn Theater, you know JBL. If you’ve heard your favorite band rock at the Georgia Dome, youknow JBL. Chances are, JBL studio monitors were used to mix and master your most-played CDs and DVDs.

JBL equipment has been setting – and is continuously raising – audio performance standards in theaters,concert halls, recording studios and arenas around the world for sixty years. Our professional heritage iswhat makes JBL JBL. And it’s what puts JBL car audio miles ahead of the competition.

If you’re looking to trick out a factory-installed audio system or build a world-class competition ride, JBL hasjust what you need. You’ll see (actually, hear ) why we’ve got street creds like nobody else in the business.

4 GTi SERIES

6 GTi AMPLIFIERS

10 GTi COMPONENT SYSTEMS

12 T595 LIMITED

14 GTi SUBWOOFERS

16 POWER SERIES

18 POWER SERIESSUBWOOFER AMPLIFIERS

20 POWER SERIESFULL-RANGE AMPLIFIERS

22 POWER SERIES SUBWOOFERS

26 POWER SERIESCOMPONENT SYSTEMS

28 POWER SERIESMULTIELEMENT LOUDSPEAKERS

30 GRAND TOURING SERIES

32 GTO FULL-RANGE AMPLIFIERS

34 GTO SUBWOOFER AMPLIFIERS

36 GTO SUBWOOFERS

38 GTO SUBWOOFER ENCLOSURES

40 GTO COMPONENT SYSTEMS

42 GTO MULTIELEMENTLOUDSPEAKERS

50 BASSPRO II

51 TECHNICAL SPECIFICATIONSFOR SUBWOOFERS

WW

W. J

BL. C

OM

EVERYTHINGYOUHEARISTRUE.

GTi COMPONENTS, SUBWOOFERS AND AMPLIFIERS

WW

W. J

BL. C

OM

7

* Prote

cted by

U.S. pat

ent no

s. 5,65

7,219; 6

,297,9

75;6,5

04,348

; 6,556

,053;

D465,47

4S; an

d D466

,107S

GTi AMPLIFIERSJBL Mobile and Crown® International, the world’s leading manufacturer of commercial and live-concertamplification, have added a newchapter to car audio history with theintroduction of the most powerful andtechnically advanced amplifiers everproduced for in-vehicle use.

GTi amplifiers are the first car audioamps to use Crown’s Balanced CurrentAmplification (BCA) circuitry. Until now,all car amplifiers have been based on theold time-alternating Class B circuit – onedevice shuts off and another one turnson. Time alternation creates distortion,especially in switching amplifiers. TheA6000GTi and the A3000GTi are the firstswitching amplifiers for cars that breakthe Class B mold. The positive andnegative devices operate simultaneously.No alternation means no zero-crossingdistortion. Visit www.crownaudio.comfor details.

• You get all the features you’d expect ina state-of-the-art subwoofer amplifier –slope-selectable, variable low-passfilter; variable phase control; full-rangepreamp outputs; remote bass-levelcontrol; Dynamic Bass Optimization(DBO) variable high-pass filter withVariable Q; 50mm2 power and groundconnections; and current and voltageindicator lights help you to optimizethe amp to drive any load.

• Direct-Connect – Allows the use of50mm2 power and ground cable toensure that enough juice is beingdelivered. No need for adapters orspecial fittings.

• Unprecedented system-buildingflexibility – Unlike conventional monosubwoofer amplifiers that delivertheir maximum power into a singleimpedance, the A6000GTi is a two-channel amplifier that can be bridgedto deliver double the voltage of asingle channel into impedancesbetween 2 and 4 ohms. The twochannels can also be connected inparallel – that’s right, parallel – toprovide double the current of a singlechannel into impedances below2 ohms. This patented* feature isunprecedented in car audioamplification. Thanks, Crown.

• Internal lighting – The A6000GTi’sinterior is fully illuminated to show offits massive components and beautifullayout. The lighting is connected by adedicated power terminal, allowing itto be controlled externally.

• Indicator control bank – The A6000GTicomes equipped with a sophisticatedindicatory bank which can be used asan effective tool when setting up theamplifier, as well as monitoring itduring operation. Maximum peakpower is nearly 17hp (horsepower).

When the two channels in the elegantA6000GTi subwoofer amplifier arebridged, 120V RMS is available to drivethe speakers with a current capacity of50 amperes. In bridged mode, channelgains are precisely matched, internallyensuring optimum performance. TheA6000GTi will deliver 6,000 watts intospeaker system impedances between3 and 6 ohms.

A6000GTi A3000GTi

9

WW

W. J

BL. C

OM

* Protected by U.S. patent nos. 5,657,219; 6,297,975; 6,504,348; 6,556,053; D465,474S; and D466,107S

6000-Watt Balanced-Current Subwoofer Amplifier With Current Servos• 2600 Watts RMS x 2 channels

at 4 ohms and ≤1% THD + N• Signal-to-noise ratio: 65dBA

(reference 1 watt into 4 ohms)• 8110 Watts RMS x 1 channel

at 4 ohms, 14.4V supply and ≤1% THD + N

• 7400 Watts RMS x 1 channel at 1 ohm, 14.4V supply and ≤1% THD + N

• Dynamic power: 6854 watts at 4 ohms

• Effective damping factor: 6.39 at 4 ohms

• Frequency response: 10Hz – 270Hz (–3dB)

• Maximum input signal: 8.5V • Maximum sensitivity: 250mV• Output regulation: .2dB at 4 ohms• Built-in, variable electronic crossover with

selectable slope• Dynamic Bass Optimization

(DBO) circuit• Variable phase control • Preamp outputs• Differential inputs• Internal lighting• Direct-Connect• Remote level control included• Dimensions (L x W x H):

747mm x 585mm x 165mm(29-3/8" x 23" x 6-1/2")

3000-Watt Balanced-Current Amplifier With Current Servos

• 1670 Watts RMS x 2 channels at 4 ohms and ≤1% THD + N

• Signal-to-noise ratio: 60dBA (reference 1 watt into 4 ohms)

• 3129 Watts RMS x 1 channel at 4 ohms, 14.4V supply and ≤1% THD + N


• Dynamic power: 2232 watts


• Frequency response: 10Hz – 21kHz (–3dB)

• Maximum input signal: 8V• Maximum sensitivity: 250mV• Output regulation: .2dB at 4 ohms• Built-in, variable electronic crossover

with selectable slope• Dynamic Bass Optimization

(DBO) circuit • Variable phase control• Preamp outputs• Differential inputs• Internal lighting• Direct-Connect• Remote level control included• Dimensions (L x W x H):

547mm x 585mm x 165mm(21-1/2" x 23" x 6-1/2")

The revolutionary A3000GTi is one ofthe world’s most powerful car audiofull-range amplifiers, and is amongthe most versatile car amplifiers on the market. It can be used forsubwoofer, mid-bass and full-rangeapplications. When combined withthe A6000GTi for subs, the resultis nothing less than amazingperformance.

The A3000GTi delivers all of thefeatures you would expect from astate-of-the-art amplifier: a slope-selectable, variable electroniccrossover; variable phase control;full-range preamp outputs’ remote-level control; Dynamic BassOptimization (DBO) variable high-pass filter with Variable Q; 50mm2

power and ground connectors; andcurrent and voltage indicator lights tohelp you to optimize the amp to drivenearly any load.

• Direct Connect – Allows the use of 50mm2 power and ground cableto ensure enough juice is beingdelivered. No need for specialadapters or special fittings.

• Unprecedented system-buildingflexibility – Unlike conventionalmono amplifiers which delivertheir maximum power into a singleimpedance, the A3000GTi, like itsbig brother, is a two-channelamplifier that can be bridged todeliver double the voltage of asingle channel into impedancesbetween 2 and 4 ohms. The twochannels can also be connected in parallel – that’s right, parallel –to provide double the current of asingle channel into impedancesbelow 2 ohms. In addition, theA3000GTi can be used as a two-channel amplifier for either full-range application. Wow, nowthat’s flexibility! This patented*feature is unprecedented in caraudio amplification.

• Internal lighting – The A3000GTi’sinterior is fully illuminated to showoff its massive components andbeautiful layout. The lighting isconnected by a dedicated powerterminal, allowing it to becontrolled externally.

• Indicator control bank – TheA3000GTi comes equippedwith a sophisticated indicatorybank that can be used as aneffective tool when settingup the amplifier, as well asmonitoring it during operation.

GTi AMPLIFIERS

WW

W.J

BL.C

OM

C508GTi

C608GTi

11

• Anodized-aluminium woofer cones –This material moves the first breakupmode to a high frequency well abovethe crossover region. The benefits aresignificantly reduced distortion in thesystem’s output at high frequencies andmaximum midrange clarity.

• Symmetrical Field Geometry™ (SFG™) –This technology determines theprecise shape of the magnetic field in and around the magnetic gap. This provides identical motorforce both above and below the gap. The benefit is low distortion,even at high excursion.

• 50mm Edge-wound aluminium voicecoils – Using this ribbon-shaped wireallows JBL engineers to preciselyspecify the number of windings in the magnetic gap. The benefits are distortion-free extension of high frequencies and increased power handling.

• Pure-titanium-dome tweeter withrubber surrounds – JBL’s pure-titaniumdome is suspended in a high-lossrubber surround that is designed todamp dome resonances. The benefitis a smooth response free fromfatigue, even at high output levels.

• Fourth-order Linkwitz-Reily acousticpassive crossovers – Steep slopesminimize interaction between drivers.The benefit is a uniform systemresponse in a variety of vehiclemounting locations.

• I-Mount™ (patent no. 5,859,917)tweeter-mounting system – This well-thought-out system allows easy and versatile installation oftweeters in a variety of mountinglocations and configurations.

• Die-cast frame – The proprietary die-cast frame accommodates long-suspension travel, and usesvented architecture, which providessuperior cooling. The benefit isincreased output with low distortion.

• Intermount III (patent no. 6,505,705)mounting system on 160mm (6-1/2")models – Allows for installation in allfour 160/165mm hole sizes withoutadapters or kits.

130mm (5-1/4") 2-WayComponent System• Power handling: 125W RMS,

500W Peak• Frequency response: 58Hz – 21kHz• Sensitivity: 88dB• System impedance: 4 ohms• Voice-coil diameter: woofer 50mm (2")

edge-wound; tweeter 25mm (1")• Mounting depth: woofer 61mm

(2-3/8"); tweeter 29mm (1-1/8")• Overall diameter: woofer 133mm (5-

1/4"); tweeter 53mm (2-1/16")• Cutout diameter: woofer 118mm

(4-5/8"); tweeter 45mm (1-3/4")• Crossover dimensions (L x W x H):

153mm x 115mm x 45mm(6" x 4-1/2" x 1-3/4")

160mm (6-1/2") 2-WayComponent System• Power handling: 150W RMS,

600W Peak• Frequency response: 50Hz – 21kHz• System impedance: 4 ohms• Sensitivity: 89dB• Voice-coil diameter: woofer 50mm (2")

edge-wound; tweeter 25mm (1")• Mounting depth: woofer 68mm

(2-11/16"); tweeter 29mm (1-1/8")• Overall diameter: woofer 159mm (6-

1/4"); tweeter 53mm (2-1/16")• Cutout diameter: woofer 131mm

(5-1/8"); tweeter 45mm (1-3/4")• Crossover dimensions (L x W x H):

153mm x 115mm x 45mm(6" x 4-1/2" x 1-3/4")

GTi COMPONENT SYSTEMS

T595 Limited

13WW

W. J

BL. C

OM

150mm x 240mm (6" x 9") 3-Way, High-Performance, Cast-Frame AutomotiveLoudspeaker• Power handling: 300W Peak,

150W RMS continuous• Impedance: 4 ohms• Frequency response: 35Hz – 22kHz• Sensitivity (2.83V/1m): 94dB• Mounting depth: 118mm (4-5/8")• Cutout diameter: 152mm x 229mm

(6" x 9")

The evolution of a classic. As anengineering and manufacturingstatement, the legendary JBL T595has been the reference three-way, 150mm x 240mm (6" x 9") automotiveloudspeaker by which all others have been measured. Designed fromthe start as a state-of-the-art product,the original T595 required fewupdates to maintain that position. For a decade, the T595 Limited has been the preferred loudspeaker of auto sound enthusiasts worldwide.Today, the T595 Limited is theultimate manifestation of JBL’s years of leadership in the field of auto sound.

• Rugged cast-frame basket – Providesmaximum rigidity and support for the motor.

• Titanium tweeters for outstanding high-frequency reproduction.

• Kevlar®-filled, lacquer-sealed, molecular-bound cone material.

• Cross-linked composite cones for powerful, fast and clear sound reproduction.

• Bi-amplification connections to drive low- and high-frequencyspeakers independently.

• Butyl rubber surround for enhanced sonicperformance, as well as extendeddurability.

• Re-coning – T595 can be re-coned for alifetime of musical pleasure.T595

LIMITED

W12GTi MkII W15GTi MkII WW

W.J

BL.C

OM

15

** U.S. patent no. 5,748,760 and other patents pending

300mm (12") Differential Drive®

Design Subwoofer• Differential Drive Design

(DDD) motor• Die-cast vented basket• Kevlar®-impregnated

paper woofer cone• Dual 6-ohm voice coils• Nitrile-butylene surround• Power handling,

RMS: 700W• Power handling,

Peak: 4000W• Voice-coil diameter: 76mm (3")• Cutout diameter: 280mm (11")• Mounting depth: 260mm (10-1/4")• Sensitivity: 91dB

GTi SUBWOOFERS• Differential Drive® Design** – The

JBL Differential Drive Design is animportant advancement in subwoofermotor technology. This new designenables each GTi subwoofer to use apair of smaller and lighter 76mm (3")-diameter voice coils. This dual-coilconfiguration provides significantlyhigher power handling throughincreased surface area, and maintainsthe low-moving mass not possible withlarger coils.

• Kevlar®-impregnated paper woofercones – This combination has beenchosen for its high strength-to-weight ratio, and is formed using aproprietary manufacturing process. Its stiffness relieves stressconcentrations that may accumulateat the base of the cone in high-powerand high-pressure applications.

• Nitrile-butylene-rubber one-piecesurround and gasket – This materialprovides an optimum blend ofelasticity and internal damping. Thesize of the roll was optimized to offergood long-throw linearity with theproper amount of control and stabilityat excursion limits.

• Proprietary die-cast frame – The thick-wall construction offers ample rigidityto support the heavy motor structure,and its vented architecture providesgreater movement of air behind thecone and spider for maximum cooling.

• Vented polepieces – Additional coolingis provided to the motor structure. Thesubwoofer’s thermal capabilities areaugmented, increasing power handling.

• Progressive spider – This providesbetter control at excursion limits thana linear spider. The benefit is reduceddistortion at high output levels.

380mm (15") Differential Drive®

Design Subwoofer• Differential Drive Design

(DDD) motor• Die-cast vented basket• Kevlar®-impregnated

paper woofer cone• Dual 6-ohm voice coils• Nitrile-butylene surround• Power handling,

RMS: 800W• Power handling,

Peak: 5000W• Voice-coil diameter: 76mm (3")• Cutout diameter: 352mm (13-7/8")• Mounting depth: 260mm (10-1/4")• Sensitivity: 92dB

Just as every performance automobilemanufacturer has a racing divisionto test cutting-edge capabilities, JBL’sGTi products push the limits of ourengineering and technology group.In celebration of our 60th anniversary,JBL is launching a new line of GTisubwoofers engineered for the seriousenthusiast who is looking for theabsolute best performance in asubwoofer available anywhere.

WW

W. J

BL. C

OM

17

IT’S ALL ABOUT THEPOWER,BABY.

POWER SERIES®®

BPx2200.1 BPx1100.1

19

WW

W.J

BL.C

OM

* Protected by U.S. patent nos. 5,657,219; 6,297,975;6,504,348; 6,556,053; D465,474S; and D466,107S

• Parallel/bridge – Unlike conventionalmono subwoofer amplifiers whichonly deliver their maximum power intoa single impedance, the BPx1100.1and BPx2200.1 are two-channelamplifiers that can be bridged todeliver double the voltage of a singlechannel into impedances between 2and 4 ohms. The two channels canalso be connected in parallel – that’sright, parallel – to provide double the current of a single channel intoimpedances below 2 ohms. Thispatented* feature is unprecedentedin car audio amplification.

• Slope-selectable variable electroniccrossover – Each of these amplifiers is equipped with a variable electroniccrossover capable of a slope rate of12dB or 24dB per octave. Thecrossover adjustment range is from32Hz to 320Hz. This allows foroptimum system and subwoofertuning to a specific vehicle cabin.

• Dynamic Bass Optimization (DBO)circuit – This provides variable high-pass filtering with adjustable “Q”below 100Hz (far beyond conventional“Bass Q” circuits) by allowing thelow-frequency output to be optimizedfor specific subwoofer applications.Frequencies below an enclosure’s

tuned frequency can be attenuated,preventing damage to the subwooferand allowing the amplifier’s power tobe better utilized. This circuit is alsofully defeatable in the event thatoutboard processors are being used.

• Full-range preamp outputs – In theevent that multiple amplifiers areused in an application, this featureallows for streamlined system hookup.No high-loss Y-adapters or splittersneeded!

• Direct-Connect – Allows the use of up to 25mm2 power and ground cableto ensure that enough juice is beingdelivered. No need for adapters orspecial fittings.

• Common-dimension amplifierfootprints – By designing the PowerSeries® amplifiers with two commondimensions, the amount of spaceoccupied in multiple-amplifier mountingapplications can be optimized.

• Internal-lighting-ready – Eachmodel is equipped with internallighting mounts, in case internallighting is desired.

• Remote bass-level control – Allowsyou to optimize bass output forspecific music or preferences fromthe driver’s position.

POWER SERIES®® SUBWOOFER AMPLIFIERS

2200-Watt Parallel/Bridge Subwoofer Amplifier With Dynamic Bass Optimization Circuit• 650 Watts RMS x 2 channels










(DBO) circuit• Preamp outputs• Differential inputs• High damping factor• Internal-lighting-ready• Direct-Connect • Remote level control included• Dimensions (L x W x H):

555mm x 312mm x 66mm(21-13/16" x 12-1/4" x 2-9/16")

1100-Watt Parallel/Bridge Subwoofer Amplifier With Dynamic Bass Optimization Circuit• 334 Watts RMS x 2 channels










(DBO) circuit• Preamp outputs• Differential inputs• High damping factor• Internal-lighting-ready• Direct-Connect• Remote level control included• Dimensions (L x W x H):

432mm x 312mm x 66mm(17" x 12-1/4" x 2-9/16")

WW

W.J

BL.C

OM

Px300.4Px600.2

21

600-Watt 4-Channel Power Amplifier With Electronic Crossover• 123.5 Watts RMS x 4 channels

at 4 ohms and ≤1% THD + N• Signal-to-noise ratio: 76.64dBA

(reference 1 watt into 4 ohms)• 358 Watts RMS x 2 channels




• Frequency response: 16.6Hz – 500kHz (–3dB)

• Maximum input signal: 5.9V• Maximum sensitivity: 75mV• Output regulation: .39dB

at 4 ohms• Built-in, variable electronic crossover with

selectable slope• Dynamic Bass Optimization

(DBO) circuit• Preamp outputs• Differential inputs• Internal-lighting-ready• Direct-Connect• Dimensions (L x W x H):

432mm x 312mm x 66mm(17" x 12-1/4" x 2-9/16")

600-Watt 2-Channel Power Amplifier With Electronic Crossover• 180 Watts RMS x 2 channels

at 4 ohms and ≤1% THD + N• Signal-to-noise ratio: 79.5dBA







at 4 ohms• Built-in, variable electronic

crossover with selectable slope• Preamp outputs• Differential inputs• Internal-lighting-ready• Direct-Connect• Dimensions (L x W x H):

432mm x 312mm x 66mm(17" x 12-1/4" x 2-9/16")

POWER SERIES®® FULL-RANGE AMPLIFIERS• Slope-selectable variable electronic

crossover – Each of the Power Seriesamps is equipped with a variableelectronic crossover capable of aslope rate of 12dB or 24dB per octave.The crossover adjustment range isfrom 32Hz to 320Hz. This allows foroptimum system and subwoofertuning to a specific vehicle cabin.

• Dynamic Bass Optimization (DBO)circuit – This provides variable high-pass filtering with adjustable “Q”below 100Hz (far beyond conventional“Bass Q” circuits) by allowing thelow-frequency output to be optimizedfor specific subwoofer applications.Frequencies below an enclosure’stuned frequency can be attenuated,preventing damage to the subwooferand allowing the amplifier’s power tobe better utilized. This circuit is alsofully defeatable in the event outboardprocessors are being used.

• Direct-Connect – Allows the use of up to 25mm2 power and ground cableto ensure that enough juice is beingdelivered. No need for adapters orspecial fittings.

• Full-range preamp outputs – In the event that multiple amplifiers are used in an application, thisfeature allows for streamlined system hookup. No high-loss Y-adapters or splitters needed!

• Common-dimension amplifierfootprints – By designing all of the Power Series amplifiers with two common dimensions, the amount of space occupied in multiple-amplifier mountingapplications can be optimized.

• Internal-lighting-ready – Each modelis equipped with internal lightingmounts, in the event that internallighting is desired.

P1022 P1222

P1220br

23

WW

W. J

BL. C

OM

P1220br

P1022 & P1222 POWER SERIES®® SUBWOOFERS

250mm (10") Subwoofer• Power handling: 400W RMS,

1600W Peak• Sensitivity (2.83V/1m): 96dB• Frequency response:

25Hz – 200Hz• Impedance: 4 ohms/1 ohm• Kevlar®-impregnated

paper woofer cone• Dual 2-ohm voice coils• Moderate Q design• Vented polepiece• Voice-coil diameter: 76mm (3")• Mounting depth: 172mm (6-3/4")• Cutout diameter: 231mm (9-1/16")

300mm (12") Subwoofer• Power handling: 400W RMS,


23Hz – 200Hz• Impedance: 4 ohms/1 ohm• Kevlar®-impregnated

paper woofer cone• Dual 2-ohm voice coils• Moderate Q design• Vented polepiece• Voice-coil diameter: 76mm (3")• Mounting depth: 172mm (6-3/4")• Cutout diameter: 281mm (11-1/16")

300mm (12") Vented Subwoofer Box• Woofer: JBL P1220• Power handling : 400W RMS,


25Hz – 300Hz• Impedance: 4 ohms• Enclosure: custom-tuned

bass-reflex• Dimensions:

580mm x 350mm/250mm x 380mm(22-13/16" x 13-13/16/9-13/16" x 15")

• Our proprietary aluminium die-castframe with thick-wall constructionoffers ample rigidity to support theheavy motor structure, and its ventedarchitecture provides greater movementof air behind the cone and spider, formaximum cooling.

• A Kevlar®-impregnated paper woofercone has been chosen for its highstrength-to-weight ratio. Its stiffnessrelieves stress concentrations thatmay accumulate at the base ofthe cone in high-power and high-pressure applications.

• The highly rigid cabinet is constructedof thick MDF material. Mounted on amassive 37mm (1-1/2") front panel andfixed with drive-in nuts, the woofer hasa rock-solid base.

• The custom-tuned bass-reflex systemis acoustically optimized for highlistening levels. While delivering state-of-the-art bass response, the double-flared 100mm (4") port successfullyeliminates port noise.

• Integrated white LED illuminationallows a view of the impressive motorof the subwoofer.

• Plus One® (patent pending) woofercones – Each speaker uses a conewith more surface area than competingmodels of the same basket size. Thebenefits are increased bass outputand increased efficiency.

• Vented polepieces – Vented polepiecesare used to provide additional coolingto the motor structure. The benefit isthat each Power Series subwoofer’sthermal capabilities are augmented,increasing power handling.

• Progressive spider – Each Power Seriessubwoofer features a progressivespider, which provides better control atexcursion limits than a linear spider.The benefit is reduced distortion at highoutput levels.

• Kevlar®-impregnated paper woofercones – This combination has beenchosen for its high strength-to-weightratio, and is formed using a proprietarymanufacturing process. Its stiffnessrelieves stress concentrations thatmay accumulate at the base of thecone in high-power and high-pressureapplications.

• Nitrile-butylene-rubber one-piecesurround and gasket – This materialprovides an optimum blend of elasticityand internal damping. The size of the rollwas optimized to offer good long-throwlinearity with the proper amount ofcontrol and stability at excursion limits.

• Proprietary die-cast frame – The frameon the Power Series subwoofers isborrowed from our top-of-the-line GTisubwoofers. The thick-wall constructionoffers ample rigidity to support theheavy motor structure, and its ventedarchitecture provides greater movementof air behind the cone and spider formaximum cooling.

• Spider-integrated tinsel leads are usedto greatly enhance reliability andeliminate audible tinsel lead slap.

P25t

P550C

P6550C

WW

W. J

BL. C

OM

27

165mm 2-Way Component System• New Plus One® (patent pending) HCL™

woofer cones• Edge-driven pure-titanium-dome tweeter• Computer-optimized, voice-matched

passive crossover• I-Mount™ (patent no. 5,859,917) tweeter-

mounting system• Frequency response: 45Hz – 23kHz• Sensitivity: 90dB• Impedance: 4 ohms• Power handling, RMS: 90W• Power handling, Peak: 270W• Mounting depth: 60mm (2-3/8")• Cutout diameter: 143mm (5-5/8")

25mm (1") Pure-Titanium-Dome Tweeter• Edge-driven dome• I-Mount™ (patent no. 5,859,917) tweeter-

mounting system• Computer-optimized, voice-matched

passive crossover• Frequency response:

2.5kHz – 23kHz• Sensitivity: 90dB• Impedance: 4 ohms• Power handling, RMS: 60W• Power handling, Peak: 180W• Mounting depth: 31mm (1-3/16")• Cutout diameter: 45mm (1-3/4")

130mm (5-1/4") 2-WayComponent System• New Plus One® (patent pending)

HCL™ woofer cones• Edge-driven pure-titanium-dome

tweeter• Computer-optimized, voice-matched

passive crossover• I-Mount™ (patent no. 5,859,917) tweeter-

mounting system• Frequency response: 55Hz – 23kHz• Sensitivity: 89dB• Impedance: 4 ohms• Power handling, RMS: 75W• Power handling, Peak: 210W• Mounting depth: 56mm (2-3/16")• Cutout diameter: 120mm (4-3/4")

• Breakthrough JBL HCL™ cone material –This consists of two woven-glass fiberlayers with an epoxy-coated Nomex®

honeycomb core. The result is a cone thatdelivers on what is claimed by many andachieved by few. It is exceptionally stiff yetlightweight. The benefits are increasedefficiency, exceptional midrange clarity andlower distortion at all output levels.

• Plus One® (patent pending) woofer cones –Each speaker uses a cone with more surfacearea than competing models of the samebasket size. The benefits are increased bassoutput and increased efficiency.

• Pure-titanium, edge-driven-dome tweeters –These are not commonly used miniature-cone tweeters, but full edge-driven domeslike those found in top-shelf home audiospeakers. The benefits are increased powerhandling and reduced distortion at highoutput levels. This technology also allowsfor better integration with the mid/woofer.Pure titanium has been chosen for its highstrength-to-weight ratio, which ensuressuperior efficiency and smooth response.

• Computer-optimized, voice-matchedpassive crossover – Each Power Seriesmultielement loudspeaker comes with anoutboard crossover that has been voice-matched to ensure that it will integrateseamlessly with other Power Seriesmodels. The benefit is flawlessperformance with incredible detail,accuracy and reduced distortion.

• Oversized voice coils and spider-integratedtinsel leads – Each Power Series modelfeatures a voice coil that’s larger than whatis found on many competing models of thesame size. This larger voice coil increasespower handling. The benefit is higheroutput with less distortion. The spider-integrated tinsel leads greatly enhancereliability and eliminate audible tinsel-lead slap.

• I-Mount™ (patent no. 5,859,917) tweeter-mounting system – This well-thought-out system allows easy and versatileinstallation of tweeters in a variety ofmounting locations and configurations.


POWER SERIES®

COMPONENT SYSTEMS

P452 P552

WW

W.J

BL.C

OM

P6552 P953

29

100mm (4") 2-Way Loudspeaker• New Plus One® (patent pending) HCL™

woofer cone• Edge-driven, pure-titanium-

dome tweeter• Computer-optimized,

voice-matched passive crossover• Frequency response: 75Hz – 23kHz• Sensitivity: 89dB• Impedance: 4 ohms• Power handling, RMS: 50W• Power handling, Peak: 150W• Mounting depth: 51mm (2")• Cutout diameter: 89mm (3-1/2")

130mm (5-1/4") 2-Way Loudspeaker• New Plus One® (patent pending) HCL™



voice-matched passive crossover• Frequency response: 55Hz – 23kHz• Sensitivity: 89dB• Impedance: 4 ohms• Power handling, RMS: 55W• Power handling, Peak: 165W• Mounting depth: 56mm (2-3/16")• Cutout diameter: 120mm (4-3/4")

POWER SERIES®®

MULTIELEMENT LOUDSPEAKERS 165mm 2-Way Loudspeaker• New Plus One® (patent pending) HCL™



voice-matched passive crossover• Frequency response: 45Hz – 23kHz• Sensitivity: 90dB• Impedance: 4 ohms• Power handling, RMS: 75W• Power handling, Peak: 225W• Mounting depth: 60mm (2-3/8")• Cutout diameter: 143mm (5-5/8")

6" x 9" 3-Way Loudspeaker• New Plus One® (patent pending) HCL™


dome tweeter• Pure-titanium super tweeter• Computer-optimized,

voice-matched passive crossover• Frequency response: 35Hz – 23kHz• Sensitivity: 90dB• Impedance: 4 ohms• Power handling, RMS: 110W• Power handling, Peak: 330W• Mounting depth: 85mm (3-5/16")• Cutout diameter: 150mm x 221mm

(6" x 8-11/16")

31

WW

W.J

BL.C

OM

ROAD WARRIORS.

GRAND TOURING® SERIES

WW

W. J

BL. C

OM

GTO755.6GTO75.4GTO75.2

33

560-Watt 6-Channel Power Amplifier• 60 Watts RMS x 4 channels

+ 107 watts RMS x 2 channels at 4 ohms and ≤1% THD + N

• Signal-to-noise ratio: 79dBA(reference 1 watt into 4 ohms)

• 160 Watts x 2 + 300 watts x 1 at 4 ohms, 14.4V supplyand ≤1% THD + N

• Dynamic power: 117 watts (channels 1, 2, 3, 4), 163 watts(channels 5, 6) at 2 ohms


• Frequency response: 10Hz – 47kHz (channels 1, 2, 3, 4),10Hz – 302Hz (channels 5, 6)

• Maximum input signal: 6V• Maximum sensitivity: 75mV• Output regulation:

.042dB at 4 ohms• 12dB Built-in, variable,

low-pass electronic crossover • Separate high-level

and low-level inputs• Remote bass-level control

(optional)• Dimensions (L x W x H):

475mm x 313mm x 60mm(18-11/16" x 12-5/16" x 2-3/8")


at 4 ohms and ≤1% THD + N• Signal-to-noise ratio:

80dBA (reference 1 watt into 4 ohms)

• 142 Watts RMS x 4 channels at 2 ohms, 14.4V supply and ≤1% THD + N


• Effective damping factor:6.384 at 4 ohms


• Maximum input signal: 5.8V• Maximum sensitivity: 75mV• Output regulation:


low-pass electronic crossover • One pair full-range

preamp outputs• Separate high-level

and low-level inputs• Dimensions (L x W x H):

384mm x 313mm x 60mm(15-1/16" x 12-5/16" x 2-3/8")





• 290 Watts RMS x 1 channel at 4 ohms, 14.4V supply and ≤1% THD + N




• Maximum input signal: 5.5V• Maximum sensitivity: 75mV• Output regulation:


low-pass electronic crossover • One pair full-range

preamp outputs• Separate high-level

and low-level inputs• Dimensions (L x W x H):

295mm x 313mm x 60mm(11-5/8" x 12-5/16" x 2-3/8")

• Full-range preamp outputs – In theevent that multiple amplifiers are usedin an application, this feature allows forstreamlined system hookup.

• The high-output PWM MOSFET powersupply ensures optimum powerdelivery into numerous impedanceswith low distortion.

• Each GTO full-range amplifier isoutfitted with a variable electroniccrossover. This allows you to optimizesystem tuning based on speakerlocation and accompanyingloudspeaker components.

GTO FULL-RANGE AMPLIFIERS

GTO601.1 GTO1201.1GTO301.1

35

WW

W.J

BL.C

OM

600-Watt Subwoofer Amplifier• 424 Watts RMS x 1 channel








at 4 ohms• Remote bass-level control (optional)• 12dB Built-in, variable,

low-pass electronic crossover• Variable bass-boost control• One pair full-range preamp

outputs• RCA low-level inputs• Dimensions (L x W x H):

384mm x 313mm x 60mm(15-1/16" x 12-5/16" x 2-3/8")












475mm x 313mm x 60mm(18-11/16" x 12-5/16" x 2-3/8")












295mm x 313mm x 60mm(11-5/8" x 12-5/16" x 2-3/8")

• High-frequency Class D switchingpower amplifiers (except GTO301.1)are more efficient than traditionalClass A/B amps and draw lesscurrent from your vehicle’s chargingsystem.

• Each GTO subwoofer amplifier isoutfitted with a variable electroniccrossover and bass-boost circuit.This allows you to fine-tune thebass to suit your preference.

• Duplicate speaker outputs – Whenmultiple subwoofers are used,duplicate connectors make parallelconnection of subs easy, simplifyinginstallation and system wiring.

• High-level and low-level inputsare provided, allowing you tointerface each model with eitheran aftermarket or factory head unit.

• Full-range preamp outputs – In the event that multiple amplifiersare used in an application, thisfeature allows for streamlinedsystem hookup.

• Remote level control – Allows youto optimize bass output for specificmusic or preferences from thedriver’s position.

GTO SUBWOOFER AMPLIFIERS

GTO1202DGTO1002DGTO804 GTO1502D

WW

W. J

BL. C

OM

37

250mm (10") Dual-2-Ohm-Voice-Coil Subwoofer• Polypropylene woofer cone• Reduced-depth proprietary frame• Vented polepiece• Hi-roll butyl surround• Sensitivity: 91dB• Frequency response: 25Hz – 400Hz• Impedance: 4 ohms/1 ohm• Power handling, RMS: 250W• Power handling, Peak: 1000W• Voice-coil diameter: 51mm (2")• Mounting depth: 116mm (4-9/16")• Cutout diameter: 233mm (9-3/16")

200mm (8") Single-4-Ohm-Voice-Coil Subwoofer• Polypropylene woofer cone• Reduced-depth proprietary frame• Vented polepiece• Hi-roll butyl surround• Sensitivity: 91dB• Frequency response: 30Hz – 400Hz• Impedance: 4 ohms• Power handling, RMS: 200W• Power handling, Peak: 800W• Voice-coil diameter: 51mm (2")• Mounting depth: 110mm (4-5/16")• Cutout diameter: 179mm (7")



GTO SUBWOOFERS

• Proprietary frame – The frame in these subwoofers delivers the maximum excursion whilereducing the overall mountingdepth, facilitating broaderinstallation options. This designalso ensures that the motorstructure stays centered in thevoice coil gap, for long-termdurability and reliability.

• Hi-roll rubber surrounds – The size of the roll has beenoptimized to deliver themaximum cone area whileproviding excellent cone-edgesuspension and long-throwlinearity, with the proper amountof control and stability atexcursion limits.

• Progressive spider – Each GTO subwoofer features aprogressive spider, whichprovides better control atexcursion limits than a linearspider. The benefit is reduceddistortion at high output levels.

• Vented polepieces – Theseprovide additional cooling to themotor structure, resulting in anincrease in the subwoofer’sthermal power-handlingcapability.

• 250mm, 300mm and 380mm(10", 12" and 15") subs areavailable with dual 2-ohm voicecoils. This offers maximumflexibility for optimized systemsetup. The two voice coils canbe configured for single 1-ohm,dual 2-ohm or single 4-ohm totalimpedance, using proprietarymetal shorting bars. All woofersare preconfigured for single4-ohm impedance, to allow easysetup in standard applications.

• Joining the lineup is theGTO804, a 200mm (8") 4-ohmsingle-voice-coil model, idealfor factory system upgradesand applications where spaceis an issue.

GTO1204BPGTO1204BR

WW

W. J

BL. C

OM

GTO1204BP-D

39

300mm (12") Band-PassSubwoofer Box• Subwoofer type: GTO1204/300mm• Enclosure type: band-pass• Power handling, RMS: 300W• Power handling, Max: 1200W• Sensitivity (2.83V/1m): 93dB• Frequency response:

30Hz – 150Hz• Impedance: 4 ohms• Dimensions (L x D x H):

520mm x 450mm x 370mm(20-1/2" x 17-3/4" x 14-9/16")

300mm (12") Dual Band-PassSubwoofer Box• Subwoofer type: 2 x GTO1204/300mm• Enclosure type: dual band-pass• Power handling, RMS: 600W• Power handling, Max: 1800W• Sensitivity (2.83V/1m): 98dB• Frequency response: 35Hz - 150 Hz• Impedance: 2 x 4 ohms• Dimensions (L x D x H):

900mm x 450mm x 370mm(35-7/16" x 17-3/4" x 14-9/16")

300mm (12") Bass-ReflexSubwoofer Box• Subwoofer type: GTO1204/300mm• Enclosure type: bass-reflex• Power handling, RMS: 300W• Power handling, Max: 1200W• Sensitivity (2.83V/1m): 93dB• Frequency response:

35Hz – 300Hz• Impedance: 4 ohms• Dimensions (L x D x H):

520mm x 414mm x 370mm(20-1/2" x 16-5/16" x 14-9/16")

• JBL’s proprietary frame – This ensuresthat the motor structure stays centeredin the voice coil gap, for long-termdurability and reliability.

• Hi-roll rubber surrounds – The size of the roll has been optimized toprovide the maximum cone areawhile delivering excellent cone-edgesuspension and long-throw linearity,with the proper amount of controland stability at excursion limits.

• Progressive spider – The GTOsubwoofer’s progressive spider produces better control at excursionlimits. The benefit is reduced distortion at high output levels.

• Vented polepieces – These provideadditional cooling to the motorstructure, resulting in an increasein the subwoofer’s thermal power-handling capability.

• Optimized port design – The largecross-sectional area of the oversizedtunnel port and the proprietary ductcover minimize port noise efficiently.This results in clean, pumping bass,even at high volumes.

• Highly rigid enclosure – The all-MDFconstruction offers a rock-solid base for tight and precise low-frequencyresponse.

• Integrated LED illumination(GTO1204BP & GTO1204BP-D) – Thevoice coil can be seen moving throughthe transparent spider spacer of theGTO subwoofer.

• Cast-aluminium grille (GTO1204BR) –This exclusive, high-end grille combinesmaximum cone protection with aunique design.

GTO ENCLOSURES

WW

W.J

BL.C

OM

GTO507CGTO607CGTO6507C

41

GTO17t25mm (1") Edge-Driven My-Ti™ Tweeter• I-Mount™ (patent no. 5,859,917) flush-

and surface-mount hardware included

• Starfish™ – Easy tweeter mounting

• Frequency response: 2.5kHz – 21kHz

• Sensitivity: 92dB• Impedance: 2 ohms• Power handling, RMS: 50W***

• Power handling, Peak: 150W***

• Mounting depth: 30mm (1-3/16")• Cutout diameter: 45mm (1-3/4")***with supplied high-pass crossover

130mm (5-1/4") 2-Way Component System• Plus One® (patent pending)

woofer cone• 25mm (1") My-Ti™ tweeter• I-Mount™ (patent no. 5,859,917)

flush- and surface-mount tweeter hardware


• Outboard crossover system• Frequency response: 70Hz – 21kHz• Sensitivity: 91db• Impedance: 2 ohms• Power handling, RMS: 55W• Power handling, Peak: 165W• Mounting depth: 59mm (2-5/16")• Cutout diameter: 120mm (4-3/4")

GTOCOMPONENT SYSTEMS• Plus One® (patent pending) woofer

cones – Each speaker uses a cone withmore surface area than competingmodels of the same basket size. Thebenefits are increased bass output andincreased efficiency.

• New My-Ti™ tweeter – Stiff, lightand highly efficient, this new Mylar®/titanium-composite tweeter offers farbetter high-frequency performancewithout the high-Q breakup modeassociated with metal domes and cones.

• Unipoint™ tweeter pod – Select JBLGrand Touring® models use a uniquerotating-tweeter design that allowsthe installer or end user to aim thetweeter at the listening position. Thebenefit of this is better imaging andoff-axis response.

• Low-Q woofer design – The improvedwoofer parameters (lower Qts) offergood bass extension and bettertransient response in typical mountinglocations (doors, rear package tray).

• I-Mount™ (patent no. 5,859,917) tweeter-mounting system – This well-thought-out system allows easy and versatileinstallation of tweeters in a variety ofmounting locations and configurations.

• Starfish™ – Easy tweeter mounting infactory locations and behind factorygrilles. Six break-off tabs makecustomization easy.

• Reduced nominal impedance – NewGTO speakers have a nominal impedanceof 2 ohms. Therefore, they extract allthe power from amplifiers and headunits that are designed to increase theirpower when driving 2-ohm loads.


• Built-in crossover networks – Most of thenew GTO speakers come with integratedhigh- and low-pass filters. This results in a smoother transition between thewoofer and tweeter, resulting in bettermidrange performance.

• Advanced engineering – These GrandTouring component systems offer farsuperior off-axis response as comparedto earlier models. This is being achievedby way of an innovative cone anddiffuser design.

160mm (6-1/2") 2-Way Component System• Plus One® (patent pending)

woofer cone• 25mm (1") My-Ti™ tweeter• I-Mount™ (patent no. 5,859,917)

flush- and surface-mount tweeter hardware


• Outboard crossover system• Frequency response: 55Hz – 21kHz• Sensitivity: 92dB• Impedance: 2 ohms• Power handling, RMS: 70W• Power handling, Peak: 210W• Intermount III (patent no. 6,505,705)

mounting system included• Mounting depth: 53mm (2-1/16")• Cutout diameter: 129mm (5-1/16")

165mm 2-Way Component System• Plus One® (patent pending)

woofer cone• 25mm (1") My-Ti™ tweeter • I-Mount™ (patent no. 5,859,917)

flush- and surface-mounttweeter hardware


• Outboard crossover system• Frequency response:

55Hz – 21kHz• Sensitivity: 92db• Impedance: 2 ohms• Power handling, RMS: 70W• Power handling, Peak: 210W• Intermount III (patent no. 6,505,705)


GTO427 GTO527

43

GTO6527 GTO6527S GTO6537

WW

W. J

BL. C

OM

Next-generation Grand Touring®

loudspeakers from JBL deliver greataudio performance for consumerslooking to upgrade their factory systemor build a world-class competition ride.Grand Touring’s Plus One woofer conesprovide maximum speaker cone area in any factory location, and 2-ohmimpedance maximizes the power available from nearly any amplifier. That’s a combination of features with real-world advantages that isn’t availablefrom anyone but JBL. GTO – a greatchoice for optimizing performance in any system, from mild to wild.

Plus One® (patent pending) woofer cones –Each GTO model has more cone area thancompeting models that fit the same factorylocation, providing increased efficiency andbetter bass output.

2-Ohm impedance – Extracts all the powerfrom amplifiers that are designed toincrease their power when driving 2 ohms.Get all the amplifier power you’ve paid forwith GTO.

Edge-driven My-Ti™ tweeters (Mylar®/titanium composite) – Stiff, light andextremely efficient, JBL’s new My-Titweeters deliver the high-frequencyextension of titanium domes with thedamping of composite diaphragms. The25mm (1") edge-driven domes (all modelsexcept 87mm [3-1/2"], 100mm [4"] and 4" x 6") provide more heat-dissipatingvoice coil surface area for higher powerhandling, and make possible lowercrossover frequency, for a better transitionfrom the midrange to tweeter. GTOspeakers are smooth-sounding, nomatter how loudly they play.

Tweeter level control – With a sliderswitch mounted right on the faceplate,adjustment of tweeter output level iseasy, even in coaxial and three-waymodels (except GTO427, GTO327 andGTO6427). This is a feature typicallyreserved for component systems orspeakers with outboard networks.

Unipoint™ rotating tweeter – The tweeter ismounted at a 15-degree angle and can berotated 350 degrees to point at the listeningposition, for optimal high-frequencyresponse in speakers mounted in off-axisfactory locations.

Built-in crossovers – Integrated high- and low-pass filters (except GTO427, GTO327 and GTO6427) provide asmoother transition between themidrange and tweeter.

Low-Q design – For improved bassextension and better transient response in infinite-baffle applications (doors andrear package tray).

Intermount III – This mounting system (on all 160mm [6-1/2"] models) allows forinstallation in nearly all 6" factory locationswithout additional adapters or kits.

New, shallow I-Mount™ – Improved I-Mount(patent no. 5,859,917) tweeter-mountingsystem requires less space behind themounting surface. The component tweetercan be aimed at the listening position formore uniform high-frequency responsebetween left and right channels.

100mm (4") 2-Way Loudspeaker• Plus One® (patent pending)

woofer cone• 19mm (3/4") My-Ti™ tweeter• Frequency response:

90Hz – 20kHz• Sensitivity: 90dB• Impedance: 2 ohms• Power handling, RMS: 35W• Power handling, Peak: 105W• Mounting depth: 54mm (2")• Cutout diameter: 93mm (3-11/16")

130mm (5-1/4") 2-Way Loudspeaker• Plus One® (patent pending)

woofer cone• 25mm (1") Edge-driven

My-Ti™ tweeter• Frequency response:

70Hz – 21kHz• Sensitivity: 91dB• Impedance: 2 ohms• Power handling, RMS: 45W• Power handling, Peak: 135W• Mounting depth: 61mm (2-3/8")• Cutout diameter: 120mm (4-3/4")

GTO MULTIELEMENT LOUDSPEAKERS

165mm 2-Way Loudspeaker• Plus One® (patent pending)


My-Ti™ tweeter• Frequency response: 55Hz – 21kHz• Sensitivity: 92dB• Impedance: 2 ohms• Power handling, RMS: 60W• Power handling, Peak: 180W• Mounting depth: 59mm (2-5/16")• Cutout diameter: 143mm (5-5/8")





woofer cone• 13mm (1/2") My-Ti™ super tweeter• 25mm (1") Edge-driven


GTO837 GTO927 GTO937

45

WW

W.J

BL.C

OM

200mm (8") 3-Way Loudspeaker• Plus One® (patent pending)

woofer cone• 13mm (1/2") My-Ti™

super tweeter• 25mm (1") Edge-driven

My-Ti™ tweeter• Frequency response: 50Hz – 21kHz• Sensitivity: 94dB• Impedance: 2 ohms• Power handling, RMS: 100W• Power handling, Peak: 300W• Mounting depth: 74mm (3")• Cutout diameter: 185mm (7-5/16")

6" x 9" 2-Way Loudspeaker• Plus One® (patent pending)


My-Ti™ tweeter• Frequency response: 50Hz – 21kHz• Sensitivity: 94dB• Impedance: 2 ohms• Power handling, RMS: 100W• Power handling, Peak: 300W• Mounting depth: 83mm (3-1/4")• Cutout diameter: 153mm x 224mm

(6" x 8-13/16")

6" x 9" 3-Way Loudspeaker• Plus One® (patent pending)


My-Ti™ tweeter• Frequency response: 50Hz – 21kHz• Sensitivity: 94dB• Impedance: 2 ohms• Power handling, RMS: 100W• Power handling, Peak: 300W• Mounting depth: 83mm (3-1/4")• Cutout diameter: 153mm x 224mm

(6" x 8-13/16")

GTO627 GTO637

WW

W. J

BL. C

OM

47


woofer cone• 25mm (1") Edge-driven My-Ti™

tweeter• Frequency response: 55Hz – 21kHz• Sensitivity: 92dB• Impedance: 2 ohms• Power handling, RMS: 60W• Power handling, Peak: 180W• Intermount III (patent no. 6,505,705)




My-Ti™ tweeter• Frequency response: 55Hz – 21kHz• Sensitivity: 92dB• Impedance: 2 ohms• Power handling, RMS: 60W• Power handling, Peak: 180W• Intermount III (patent no. 6,505,705)


WW

W.J

BL.C

OM

49

GTO6427GTO327 GTO86274" x 6" 2-Way LoudspeakerWith DIN Adapter• Plus One® (patent pending)

woofer cone• 25mm (1") Edge-driven My-Ti™

tweeter• Frequency response: 75Hz – 21kHz• Sensitivity: 91dB• Impedance: 2 ohms• Power handling, RMS: 40W• Power handling, Peak: 120W• Mounting depth: 47mm (1-7/8")• Cutout diameter: 85mm x 147mm

(3-3/8" x 5-3/4")


woofer cone• 19mm (3/4") My-Ti™ tweeter• Frequency response:

90Hz – 20kHz• Sensitivity: 89dB• Impedance: 2 ohms• Power handling, RMS: 25W• Power handling, Peak: 75W• Mounting depth: 37mm (1-7/16")• Cutout diameter: 85mm (3-3/8")

6" x 8"/5" x 7" 2-Way Loudspeaker• Plus One® (patent pending)


My-Ti™ tweeter• Frequency response:

50Hz – 21kHz• Sensitivity: 92dB• Impedance: 2 ohms• Power handling, RMS: 60W• Power handling, Peak: 180W• Mounting depth: 62mm (2-7/16")• Cutout diameter: 126mm x 183mm

(5" x 7-3/16")

51

BassPro™ II

WW

W. J

BL. C

OM

W12GTi MkII W15GTi MkII P1022 P1222 GTO804 GTO1002D GTO1202D GTO1502D

12" 15" 10" 12" 8" 10" 12" 15"

30cm 38cm 25cm 30cm 20cm 25cm 30cm 38cm

700W 800W 400W 400W 200W 250W 300W 300W

4000W 5000W 1600W 1600W 800W 1000W 1200W 1200W

18Hz – 1kHz 16Hz – 1kHz 25Hz – 200Hz 23Hz – 200Hz 30Hz – 400Hz 25Hz – 400Hz 23Hz – 400Hz 23Hz – 400Hz

91dB 92dB 96dB 97dB 91dB 91dB 93dB 93dB

dual 6 ohms dual 6 ohms dual 2 ohms dual 2 ohms 4 ohms dual 2 ohms dual 2 ohms dual 2 ohms

76mm (3") 76mm (3") 76mm (3") 76mm (3") 51mm (2") 51mm (2") 51mm (2") 51mm (2")

280mm (11") 352mm (13-7/8") 231mm (9-1/16") 281mm (11") 179mm (7") 233mm (9-3/16") 284mm (11-3/16") 341mm (13-7/16")

260mm (10-1/4") 260mm (10-1/4") 172mm (6-3/4") 172mm (6-3/4") 110mm (4-5/16") 116mm (4-9/16") 129mm (5-1/16") 143mm (5-5/8")

3.20* 2.95* 3.95 3.98 3.49* 1* 1* 0.96*

0.75* 1.06* 1.93 1.86 1.64 0.72 0.71 0.5

480 780 314 482 214.00 355.00 532.00 855.00

14.64* 15.39* 14.14 15.88 12.88 7.70 7.71 8.2

44.75 132.20 32 51 16.42 38.70 97.80 171.00

135.28 153.02 210 170.36 251 215.20 242 164.7

184.8 260.67 145 182.31 115 160.40 189 246.9

178.72 248.15 145.43 180.23 113.20 156.50 182 232.5

31.83 25.20 30 28.5 29.60 27 23.50 25

6.68 7.20 6 4.08 6.37 6.45 7.14 6.08

0.55 0.51 0.5 0.49 0.45 0.46 0.47 0.55

0.51 0.48 0.45 0.47 0.42 0.43 0.44 0.51

20.32 20.32 15.95 15.9 11.5 12.50 12.50 8.5

0.8 0.8 0.63 0.63 0.43 0.5 0.5 0.31

28.3L 42.5L 21L 28L 8.5L 21L 28L 43L

63.7L 113.3L 50L 63.3L 17L 35.4L 49.6L 99.1L338mm 385mm 304mm 320mm 225mm 221mm 254mm 331mm100mm 152mm 76mm 100mm 64mm 77mm 102mm 102mm

56.6L 56.6L 35.4L 56.6L 14.2L 28.3L 35.4L 56.6L42.5L 96.3L 49.5L 42.5L 15.3L 21.2L 28.3L 56.6L268mm 374mm 173mm 320mm 194mm 149mm 204mm 194mm152mm 152mm 100mm 100mm 77mm 102mm 102mm 102mm

78L 184L83mm 152mm152mm 152mm

57L 156L95mm 152mm152mm 152mm

52L 133L83mm 152mm152mm 152mm

Length fo

Portfo

Figure 2 Figure 3Figure 1

(Stuffed with loosely packed fiberfill) Diameter

Length

Diameter

Mounting depth

Outer diameter

Cutout diameter

TECHNICAL SPECIFICATIONS FOR SUBWOOFERSGTi SUBWOOFERS POWER SUBWOOFERS GTO SUBWOOFERS

Size

Power RMS

Max

Frequency response

Sensitivity

Impedance

Voice-coil diameter

Cutout diameter (B)

Mounting depth (A)

THIELE-SMALL PARAMETERS

Voice-coil DC resistance

Voice-coil inductance @ 1kHz

Driver radiating area

Motor force factor

Compliance volume

Suspension compliance Cms (mm/n)

Moving mass, air load Mms (grams)

Moving mass, diaphragm Mmd (grams)

Free-air resonance Fs (Hz)

Mechanical Q Qms

Electrical Q Qes

Total Q Qts

Maximum excursion Xmax (mm)

One-way Xmax (in)

* voice coils connected in parallel

RECOMMENDED ENCLOSURES

A – Sealed enclosure (Figure 1)

Volume

B – Vented enclosure (Figure 2)

VolumePort lengthPort diameter

C – Band-pass enclosure (Figure 3)

Front volumeBack volumePort lengthPort diameter

D – SPL vented enclosure for 60Hz test (Figure 2)






Amplified Subwoofer System• 100W RMS 4-channel amplifier• Quad-voice-coil subwoofer• Variable electronic crossover• Accepts low-level or high-level inputs• Remote bass-level control included• Dimensions (L x W x H):

410mm x 242mm x 312mm(16-1/8" x 9-1/2" x 12-1/4")

BASSPRO™ II

• BassPro™ II has been engineered forconsumers looking to either addgreat-sounding bass to a factorysystem or add low bass extensionto an aftermarket system. Itscompact footprint allows it to beinterfaced with a range of cars,trucks and SUVs.

• The heart of BassPro II is a 100-watt, four-channel amplifier drivinga unique quad-voice-coil subwoofer.Performance can be optimized bythe user via a variable electroniccrossover and gain control.

Documents

CAR AUDIO 2006 - vzdy.sk · CAR AUDIO 2006 JBL, Incorporated HCGI, 2 route de Tours 72500 Château de Loir, France ... 36 GTO SUBWOOFERS 38 GTO SUBWOOFER ENCLOSURES 40 GTO COMPONENT