Car hauler rgb

Welcome to the

... of trailers!(574) 343-2090 www.NewGenTrailer.com

Trailers & Manufacturing, LLC612 Kollar Street-Elkhart, IN 46514

(574) 343-2090www.NewGenTrailer.com

Distributed by:

Model Deck Length Deck Height GVWR Axles Empty Weight

NGCHWDTA-8314.2 14’ + 2’ 20” 7000 Lbs. 2 X 3500 Lb. 1865 Lbs.



All models measure 83” in width between fenders

STANDARD MODEL SPECIFICATIONS

MODEL SHOWN: NGCHWDTA-8316.2

If you want the best way to move your cars, ATV’s, small tractors, and other equipment and not have to worry about product failure, then a New Gen Iron Man is what you are looking for. Our dealers and their customers provided input to create the Ultimate Iron Man Series of Car Haulers. A New Gen Iron Man Car Hauler comes standard with construction materials that others consider optional. We offer a wide range of options and you can even custom order your New Gen Iron Man to meet your exact needs. Powder coat finish and a host of other features will make your life easier!

When We Designed The

We Immediately Discovered

New Gen Iron Man Car Hauler Series

SUCCESS!

Iron Man Car Hauler Series

2 5/16” A-Frame Coupler

2000 Lb. Top Wind Jack

2”X2” 16 Ga. “Cow Catcher”

Tread Plate Steel Fenders

2”x6” Treated Decking

Welded Board Tucks Front & Rear (2) 3500 Lb. Brake Axles With “Easy

Lube” Hubs And 205/75D/15” Tires

2’ .125 Tread Plate Beaver Tail

4 Corner Welded D-Rings

Full Length Ramp Mount Across Rear

LED Lighting

Slide In Ramps Under Rear of Trailer

Front & Rear Steps

Stake Pockets & Rub Rail Run Full Length Of Trailer2”X4” 11 Ga. Tube With Full

Wrap Tongue & Main Frame

Grommet Mount Sealed Lights

·2” X 4” 11 Ga. Tube Tongue and Full Wrap ·2000 Lb. Side Wind Jack with “Sand Foot”

·2” X 4” 11 Ga. Tube Frame ·Stake Pockets, Rub Rails & 4 D-Rings

·1-1/2” X 2-1/2” Cross Members (24” On Center) · (2) 3500 Lb. Brake Axle with “Easy Lube” Hubs

·2” X 2” 16 Ga. Tube “Cow Catcher” ·205/75D/15” Tires Mounted on Silver Mod Rims

·2’ Tread Plate Beaver ·2” X 6” Treated Floor with Board Tucks

·Rear Mounted Ramps with Spring Loaded Pins ·100% L.E.D. Dept. of Transportation (DOT) Lighting

· Tear Drop Tread Plate Fenders with Front & Rear Steps ·7 Way RV Plug & Break Away Battery Kit for Brakes

Standard Beaver Tail, Under Mount Ramps and LED Lighting

Standard Front & Rear Steps Standard Front & Rear Board Tucks

Standard D-Rings

Iron Man Car Hauler Serieswww.NewGenTrailer.com

Powder Coat Finishes

Standard Model Features

All materials © 2012-2013 New Generation Trailers, LLC(574) 343-2090 www.NewGenTrailer.com

Every New Gen Trailer we build is powder coated with PPG™ products. When you consider your first or next trailer, a powder coat finish is far superior to conventional paint. Powder coat is extremely durable and does not crack, chip, or peel more commonly associated with typical coatings. Powder coating is also much more rust and corrosion resistant making it the longest lasting and most durable coating available.

YellowRed White Grey BlueGreenBlack

New Generation Trailers & Manufacturing, LLC warrants each trailer to be free from Defects in Materials and Workmanship for 24 months to the original purchaser from date of purchase, under normal use and rated load capacity.New Generation Trailers & Manufacturing, LLC, warrants its’ finish to be free from defect as a result of improper surface preparation and application for a period of 24 months to the original purchaser from date of purchase, or 30 months from date of manufacture, whichever expires first.All auxiliary parts, axle assemblies, brake systems, wheels, tires, light systems, hitch couplers, jacks, power units, cylinders, or other accessories or purchased parts are covered by the warranty of the original manufacturer.This warranty does not cover: normal wear, lack of maintenance, abuse or negligence, overloading in excess of the GVWR on the VIN sticker. Additional terms apply and can be found at www.NewGenTrailer.com

Warranty

Documents

Car hauler rgb