Carbide Burs- Double Cut

- Aluminium Cut- Comprehensive range of shapes to suit your application

- Standard & extra length available- Sets & merchandisers

CARBIDE BURS

Carbide Bur Finder

Cylindrical, Square End

Cylindrical, Square End, Long Reach

Cylindrical, Square End, Al Cut

Cylindrical, Radius End

Cylindrica

l, Radius End, Long Re

ach

Cylindrica

l, Radius End, Al Cut

Ball Shape

Ball Shape, Long Reach

Ball Shape, Al Cut

Oval Shape

Oval Shape, Al Cut

Tree Shape, Radius End

Tree Shape, Radius End

, Long Reach

Tree Shape, Radius End, Al Cut

Tree Shape, Pointed End

Flam

e Shape

Taper Shape

Taper Shape, Long Reach

Taper Shape, Al Cut

Cone Shape

Inverted Cone Shape

Sets & Me

rchandisers

Page

Catalogue Code B200 B210 B215 B201 B211 B216 B202 B212 B217 B203 B218 B204 B213 B219 B205 B206 B207 B214 B220 B208 B209

Material VHM VHM

Surface Finish Brt Brt

Application Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel

Standard Sutton Standard Sutton Standard

Material Geometry Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut

1.0 Steels HB N/mm2 % Elong.

1.1 Mild steels, magnetic soft steel <200 >200 <400 10 • • • • • • • • • • • • • • • • • • • • •1.2 Free cutting, structural, unalloyed <200 >350 <700 30 • • • • • • • • • • • • • • • • • • • • •1.3 Plain carbon, low alloyed <300 >350 <850 20 • • • • • • • • • • • • • • •1.4 Alloy steels harden. / tempered <250 >500 <850 30 • • • • • • • • • • • • • • •1.5 Alloy steels harden. / tempered <350 >850 <1200 30 • • • • • • • • • • • • • • •1.6 Hardened, heat treated,

high tensile alloy <420 >1500 12 • • • • • • • • • • • • • • •1.7 Hardened Steel 45-50 Rc <550 <12

1.8 Hardened Steel 50-62 Rc <700 <12

2.0 Stainless Steels

2.1 Free machining <250 <850 25 • • • • • • • • • • • • • • •2.2 Austenitic <250 <850 20 • • • • • • • • • • • • • • •2.3 Ferritic + martensitic <250 <850 20 • • • • • • • • • • • • • • •3.0 Cast Irons

3.1 Lamellar graphite (Grey soft) <150 <500 10 • • • • • • • • • • • • • • •3.2 Lamellar graphite (Grey hard) <300 <1000 103.3 Nodular (spheroidal)

graphite & malleable <200 <700 10 • • • • • • • • • • • • • • •4.0 Titaniums

4.1 Pure Titanium <250 <850 20

4.2 Titanium alloys >250 >850 20

5.0 Nickels

5.1 Nickel alloys <250 <850 25

5.2 Nickel alloys >250 >850 25

6.0 Coppers

6.1 Pure Copper (electrolytic Cu) <120 <400 12 • • • • • •6.2 Short chip Brass, Phosphor

Bronze, gun metal <200 <700 12

6.3 Long chip Brass, Bronze <200 <700 12

7.0 Aluminiums

7.1 Aluminium unalloyed <100 <350 15 • • • • • •7.2 Magnesium unalloyed <150 <350 15 • • • • • •7.3 Al Alloyed Si < 1.5 % <120 <500 15 • • • • • •7.4 Al Alloyed 1.5 % < Si < 10% <120 <400 10 • • • • • •7.5 Al Alloyed > 10% Si - <400 N • • • • • •7.6 Magnesium alloys - <400 N • • • • • •8.0 Plastics8.1 Plastics, Thermoplastics,

Polyethylene <340 <50 N • • • • • •

• Optimal • Effective428

www.sutton.com.au

430430 431 432 433430 432 432 433431 431

Cylindrical, Square End

Cylindrical, Square End, Long Reach

Cylindrical, Square End, Al Cut

Cylindrical, Radius End

Cylindrica

l, Radius End, Long Re

ach

Cylindrica

l, Radius End, Al Cut

Ball Shape

Ball Shape, Long Reach

Ball Shape, Al Cut

Oval Shape

Oval Shape, Al Cut

Tree Shape, Radius End

Tree Shape, Radius End

, Long Reach

Tree Shape, Radius End, Al Cut

Tree Shape, Pointed End

Flam

e Shape

Taper Shape

Taper Shape, Long Reach

Taper Shape, Al Cut

Cone Shape

Inverted Cone Shape

Sets & Me

rchandisers

B900 BM20

B900 SCB100

B900 BM98

B900 BM200

B900 SCB300

B900 SCB5

Page

Catalogue Code B200 B210 B215 B201 B211 B216 B202 B212 B217 B203 B218 B204 B213 B219 B205 B206 B207 B214 B220 B208 B209

Material VHM VHM

Surface Finish Brt Brt

Application Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel Aluminium Steel

Standard Sutton Standard Sutton Standard

Material Geometry Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut Al Cut Double Cut

1.0 Steels HB N/mm2 % Elong.

1.1 Mild steels, magnetic soft steel <200 >200 <400 10 • • • • • • • • • • • • • • • • • • • • •1.2 Free cutting, structural, unalloyed <200 >350 <700 30 • • • • • • • • • • • • • • • • • • • • •1.3 Plain carbon, low alloyed <300 >350 <850 20 • • • • • • • • • • • • • • •1.4 Alloy steels harden. / tempered <250 >500 <850 30 • • • • • • • • • • • • • • •1.5 Alloy steels harden. / tempered <350 >850 <1200 30 • • • • • • • • • • • • • • •1.6 Hardened, heat treated,

high tensile alloy <420 >1500 12 • • • • • • • • • • • • • • •1.7 Hardened Steel 45-50 Rc <550 <12

1.8 Hardened Steel 50-62 Rc <700 <12

2.0 Stainless Steels

2.1 Free machining <250 <850 25 • • • • • • • • • • • • • • •2.2 Austenitic <250 <850 20 • • • • • • • • • • • • • • •2.3 Ferritic + martensitic <250 <850 20 • • • • • • • • • • • • • • •3.0 Cast Irons

3.1 Lamellar graphite (Grey soft) <150 <500 10 • • • • • • • • • • • • • • •3.2 Lamellar graphite (Grey hard) <300 <1000 103.3 Nodular (spheroidal)

graphite & malleable <200 <700 10 • • • • • • • • • • • • • • •4.0 Titaniums

4.1 Pure Titanium <250 <850 20

4.2 Titanium alloys >250 >850 20

5.0 Nickels

5.1 Nickel alloys <250 <850 25

5.2 Nickel alloys >250 >850 25

6.0 Coppers

6.1 Pure Copper (electrolytic Cu) <120 <400 12 • • • • • •6.2 Short chip Brass, Phosphor

Bronze, gun metal <200 <700 12

6.3 Long chip Brass, Bronze <200 <700 12

7.0 Aluminiums

7.1 Aluminium unalloyed <100 <350 15 • • • • • •7.2 Magnesium unalloyed <150 <350 15 • • • • • •7.3 Al Alloyed Si < 1.5 % <120 <500 15 • • • • • •7.4 Al Alloyed 1.5 % < Si < 10% <120 <400 10 • • • • • •7.5 Al Alloyed > 10% Si - <400 N • • • • • •7.6 Magnesium alloys - <400 N • • • • • •8.0 Plastics8.1 Plastics, Thermoplastics,

Polyethylene <340 <50 N • • • • • •429

www.sutton.com.au

437 437 438437 439436435434 440434434

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the

chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Cylindrical, Square End

Catalogue Code B200 B210 B215Discount Group B0102 B0102 B0102

Material VHM VHM VHM

Surface Finish Brt Brt Brt

Application Steel Steel Aluminium

Geometry Double Cut Double Cut Al Cut

Shank Tolerance - - -

Size Ref. d1 l1 l2 d2 Item # Item # Item #

Double CutSA410 1/16 1-1/2 1/4 1/8 B200 SA410

SA420 3/32 1-1/2 7/16 1/8 B200 SA420

SA430 1/8 1-1/2 9/16 1/8 B200 SA430

SA510 1/4 2 3/16 1/8 B200 SA510

SA140 3/16 2 5/8 1/4 B200 SA140

SA100 1/4 2 5/8 1/4 B200 SA100

SA200 5/16 2-1/2 3/4 1/4 B200 SA200

SA300 3/8 2-1/2 3/4 1/4 B200 SA300

SA400 7/16 2-3/4 1 1/4 B200 SA400

SA500 1/2 2-3/4 1 1/4 B200 SA500

SA600 5/8 2-3/4 1 1/4 B200 SA600

SA700 3/4 2-3/4 1 1/4 B200 SA700

SA900 1 2-3/4 1 1/4 B200 SA900

Double Cut, Long ReachSA3L6 3/8 6-3/4 3/4 1/4 B210 SA3L6

SA5L6 1/2 7 1 1/4 B210 SA5L6

Aluminium CutSA1AC 1/4 2 5/8 1/4 B215 SA1AC

SA3AC 3/8 2-1/2 3/4 1/4 B215 SA3AC

SA5AC 1/2 2-3/4 1 1/4 B215 SA5AC

SA6AC 5/8 2-3/4 1 1/4 B215 SA6AC

SA7AC 3/4 2-3/4 1 1/4 B215 SA7AC

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

430

www.sutton.com.au

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the

chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Cylindrical, Radius End

Catalogue Code B201 B211 B216Discount Group B0102 B0102 B0102

Material VHM VHM VHM

Surface Finish Brt Brt Brt

Application Steel Steel Aluminium

Geometry Double Cut Double Cut Al Cut

Shank Tolerance - - -

Size Ref. d1 l1 l2 d2 Item # Item # Item #

Double CutSC410 3/32 1-1/2 1/2 1/8 B201 SC410

SC420 1/8 1-1/2 1/2 1/8 B201 SC420

SC510 1/4 2 1/2 1/8 B201 SC510

SC120 1/8 2 1/2 1/4 B201 SC120

SC140 3/16 2 5/8 1/4 B201 SC140

SC100 1/4 2 5/8 1/4 B201 SC100

SC200 5/16 2-1/2 3/4 1/4 B201 SC200

SC300 3/8 2-1/2 3/4 1/4 B201 SC300

SC400 7/16 2-3/4 1 1/4 B201 SC400

SC500 1/2 2-3/4 1 1/4 B201 SC500

SC600 5/8 2-3/4 1 1/4 B201 SC600

SC700 3/4 2-3/4 1 1/4 B201 SC700

Double Cut, Long ReachSC3L6 3/8 6-3/4 3/4 1/4 B211 SC3L6

SC5L6 1/2 7 1 1/4 B211 SC5L6

Aluminium CutSC1AC 1/4 2 5/8 1/4 B216 SC1AC

SC3AC 3/8 2-1/2 3/4 1/4 B216 SC3AC

SC5AC 1/2 2-3/4 1 1/4 B216 SC5AC

SC7AC 3/4 2-3/4 1 1/4 B216 SC7AC

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

431

www.sutton.com.au

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip

to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Ball Shape

Catalogue Code B202 B212 B217Discount Group B0102 B0102 B0102

Material VHM VHM VHM

Surface Finish Brt Brt Brt

Application Steel Steel Aluminium

Geometry Double Cut Double Cut Al Cut

Shank Tolerance - - -

Size Ref. d1 l1 l2 d2 Item # Item # Item #

Double CutSD410 3/32 1-1/2 1/8 B202 SD410

SD420 1/8 1-1/2 1/8 B202 SD420

SD510 1/4 1-3/4 1/8 B202 SD510

SD110 1/8 2 1/4 B202 SD110

SD140 3/16 2 1/4 B202 SD140

SD100 1/4 2 1/4 B202 SD100

SD200 5/16 2-1/16 1/4 B202 SD200

SD300 3/8 2-1/16 1/4 B202 SD300

SD400 7/16 2-1/8 1/4 B202 SD400

SD500 1/2 2-3/16 1/4 B202 SD500

SD600 5/8 2-5/16 1/4 B202 SD600

SD700 3/4 2-7/16 1/4 B202 SD700

SD900 1 2-3/4 1/4 B202 SD900

Double Cut, Long ReachSD3L6 3/8 6-3/4 1/4 B212 SD3L6

SD5L6 1/2 6-1/2 1/4 B212 SD5L6

Aluminium CutSD1AC 1/4 2 1/4 B217 SD1AC

SD3AC 3/8 2-1/16 1/4 B217 SD3AC

SD5AC 1/2 2-3/16 1/4 B217 SD5AC

SD6AC 5/8 2-5/16 1/4 B217 SD6AC

SD7AC 3/4 2-7/16 1/4 B217 SD7AC

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

432

www.sutton.com.au

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip

to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Oval Shape

Catalogue Code B203 B218Discount Group B0102 B0102

Material VHM VHM

Surface Finish Brt Brt

Application Steel Aluminium

Geometry Double Cut Al Cut

Shank Tolerance - -

Size Ref. d1 l1 l2 d2 Item # Item #

Double CutSE410 1/8 1-1/2 7/32 1/8 B203 SE410

SE510 1/4 2-1/8 3/8 1/8 B203 SE510

SE100 1/4 2 3/8 1/4 B203 SE100

SE300 3/8 2-11/32 19/32 1/4 B203 SE300

SE500 1/2 2-5/8 7/8 1/4 B203 SE500

SE600 5/8 2-3/4 1 1/4 B203 SE600

SE700 3/4 2-3/4 1 1/4 B203 SE700

Aluminium CutSE3AC 3/8 2-11/32 19/32 1/4 B218 SE3AC

SE5AC 1/2 2-5/8 7/8 1/4 B218 SE5AC

SE6AC 5/8 2-3/4 1 1/4 B218 SE6AC

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

433

www.sutton.com.au

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the

chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Tree Shape, Radius End

Catalogue Code B204 B213 B219Discount Group B0102 B0102 B0102

Material VHM VHM VHM

Surface Finish Brt Brt Brt

Application Steel Steel Aluminium

Geometry Double Cut Double Cut Al Cut

Shank Tolerance - - -

Size Ref. d1 l1 l2 d2 Item # Item # Item #

Double CutSF410 1/8 1-1/2 1/4 1/8 B204 SF410

SF420 1/8 1-1/2 1/2 1/8 B204 SF420

SF510 1/4 2 1/2 1/8 B204 SF510

SF100 1/4 2 5/8 1/4 B204 SF100

SF300 3/8 2-1/2 3/4 1/4 B204 SF300

SF400 7/16 2-3/4 1 1/4 B204 SF400

SF500 1/2 2-3/4 1 1/4 B204 SF500

SF600 5/8 2-3/4 1 1/4 B204 SF600

SF700 3/4 2-3/4 1 1/4 B204 SF700

SF140 3/4 2-3/4 1 -1/4 1/4 B204 SF140

SF150 3/4 3-1/4 1 -1/2 1/4 B204 SF150

Double Cut, Long ReachSF3L6 3/8 6-3/4 3/4 1/4 B213 SF3L6

SF5L6 1/2 7 1 1/4 B213 SF5L6

Aluminium CutSF1AC 1/4 2 3/4 1/4 B219 SF1AC

SF3AC 3/8 2-1/2 3/4 1/4 B219 SF3AC

SF5AC 1/2 2-3/4 1 1/4 B219 SF5AC

SF6AC 5/8 2-3/4 1 1/4 B219 SF6AC

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

434

www.sutton.com.au

435

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the

chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Tree Shape, Pointed End

Catalogue Code B205Discount Group B0102

Material VHM

Surface Finish Brt

Application Steel

Geometry Double Cut

Shank Tolerance -

Size Ref. d1 l1 l2 d2 Item #

Double CutSG410 1/8 1-1/2 1/4 1/8 B205 SG410

SG430 1/8 1-1/2 3/8 1/8 B205 SG430

SG510 1/4 2 1/2 1/8 B205 SG510

SG100 1/4 2 5/8 1/4 B205 SG100

SG200 5/16 2-1/2 3/4 1/4 B205 SG200

SG300 3/8 2-1/2 3/4 1/4 B205 SG300

SG130 1/2 2-1/2 3/4 1/4 B205 SG130

SG500 1/2 2-3/4 1 1/4 B205 SG500

SG600 5/8 2-3/4 1 1/4 B205 SG600

SG700 3/4 2-3/4 1 1/4 B205 SG700

SG150 3/4 2-3/4 1-1/2 1/4 B205 SG150

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

435

www.sutton.com.au

435435

Catalogue Code B206Discount Group B0102

Material VHM

Surface Finish Brt

Application Steel

Geometry Double Cut

Shank Tolerance -

Size Ref. d1 l1 l2 d2 Item #

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the

chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Flame Shape

Double CutSH410 1/8 1-1/2 1/4 1/8 B206 SH410

SH100 1/4 2 5/8 1/4 B206 SH100

SH200 5/16 2-1/2 3/4 1/4 B206 SH200

SH500 1/2 3 1 -1/4 1/4 B206 SH500

SH600 5/8 3-3/16 1 -7/16 1/4 B206 SH600

SH700 3/4 3-3/8 1 -5/8 1/4 B206 SH700

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

436

www.sutton.com.au

Catalogue Code B207 B214 B220Discount Group B0102 B0102 B0102

Material VHM VHM VHM

Surface Finish Brt Brt Brt

Application Steel Steel Aluminium

Geometry Double Cut Double Cut Al Cut

Shank Tolerance - - -

Size Ref. d1 l1 l2 d2 Rad Item # Item # Item #

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the

chip to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Taper Shape

Double CutSL410 1/8 1-1/2 3/8 1/8 6 B207 SL410

SL420 1/8 1-1/2 1/2 1/8 7 B207 SL420

SL100 1/4 2 5/8 1/4 14 B207 SL100

SL200 5/16 2-5/8 7/8 1/4 14 B207 SL200

SL300 3/8 2-13/16 1 -1/16 1/4 14 B207 SL300

SL400 1/2 2-7/8 1 -1/8 1/4 14 B207 SL400

SL600 5/8 3-1/16 1 -5/16 1/4 14 B207 SL600

SL700 3/4 3-1/4 1 -1/2 1/4 14 B207 SL700

Double Cut, Long ReachSL3L6 3/8 7-1/16 1 -1/16 1/4 14 B214 SL3L6

Aluminium CutSL4AC 1/2 2-7/8 1-1/8 1/4 14 B220 SL4AC

SL6AC 5/8 3-1/16 1-5/16 1/4 14 B220 SL6AC

SL7AC 3/4 3-1/4 1-1/2 1/4 14 B220 SL7AC

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

437

www.sutton.com.au

Catalogue Code B208Discount Group B0102

Material VHM

Surface Finish Brt

Application Steel

Geometry Double Cut

Shank Tolerance -

Size Ref. d1 l1 l2 d2 Angle Item #

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip

to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Cone Shape

SM420 1/8 1-1/2 1/2 1/8 12° B208 SM420

SM430 1/8 1-1/2 5/8 1/8 9° B208 SM430

SM510 1/4 2 1/2 1/8 22° B208 SM510

SM100 1/4 2 1/2 1/4 22° B208 SM100

SM200 1/4 2 3/4 1/4 14° B208 SM200

SM300 1/4 2 1 1/4 12° B208 SM300

SM400 3/8 2-1/2 3/4 1/4 28° B208 SM400

SM500 1/2 2-3/4 1 1/4 28° B208 SM500

SM600 5/8 2-7/8 1-1/8 1/4 31° B208 SM600

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

438

www.sutton.com.au

Catalogue Code B209Discount Group B0102

Material VHM

Surface Finish Brt

Application Steel

Geometry Double Cut

Shank Tolerance -

Size Ref. d1 l1 l2 d2 Angle Item #

- The double cut bur allows for rapid stock removal in the harder materials. - The chisel tooth pattern not only minimises tool chatter but reduces the chip

to a granular shape, in most materials.Al Cut - for rapid material removal of soft materials such as: Aluminium, Brass, Copper, Plastics that would normally load other cuts

Carbide Burs Inverted Cone Shape

SN420 1/8 1-1/2 1/8 1/8 14° B209 SN420

SN510 1/4 1-3/4 1/4 1/8 10° B209 SN510

SN100 1/4 2 1/4 1/4 10° B209 SN100

SN200 3/8 2-1/8 3/8 1/4 13° B209 SN200

SN400 1/2 2-1/2 1/2 1/4 28° B209 SN400

SN600 5/8 2-1/2 3/4 1/4 18° B209 SN600

SN700 3/4 2-5/8 5/8 1/4 30° B209 SN700

Taper ShapeFlame Shape

Tree Shape PointedTree Shape Radius

Oval ShapeBall Shape

Cylindrical RadiusCylindrical Square

Cone Shape Inverted Cone Shape

B200 SA300

Catalogue Code Size Ref.

Item #

439

www.sutton.com.au

All sets packed in ABS case (industrial grade plastic material).

Catalogue Code B900Discount Group B0102

Material VHM

Surface Finish Brt

Application -

Geometry -

Shank Tolerance -

Size Ref. Description d1 d2 Qty Item #

Carbide Burs Sets

B900 SCB100 B900 SCB300 B900 SCB5

Bur SetsSCB100 SA 100 SC 100 SD 100 SF 100 SC1 AC 1/4 1/4 5 B900 SCB100

SCB300 SA 300 SC 300 SD 300 SF 300 SC3 AC 3/8 1/4 5 B900 SCB300

SCB500 SA 500 SC 500 SD 500 SF 500 SC5 AC 1/2 1/4 5 B900 SCB500

SCB5 SA 300 SC 300 SC 500 SF 300 SF 500 3/8 & 1/2 1/4 5 B900 SCB5

Trade Counter MerchandiserBM20 SA100 SA300 SA500

SC100 SC300 SC500 SD100 SD300 SE300 SE500 SF100 SF300 SF500 SG300 SH200 SH500 SL200 SL300 SL400 SL600Merchandiser Hardware:PM7020 - Bur Merchandise Unit BM20499980259 - Brochure Carbide Burs

20 B900 BM20

BM98 SA100 SA140 SA200 SA300 SA500 SA600 SC100 SC200 SC300 SC400 SC500 SC600 SD100 SD140 SD300 SD500 SE100 SE300 SE500 SE600 SF100 SF300 SF400 SF500 SG100 SG130 SG200 SG300 SG500 SH200 SH500 SH600 SL100 SL200 SL300 SL400 SL600 SM300 SM400 SM500 SM600 SA3AC SC1AC SC3AC SC5AC SD3AC SF3AC SF5AC SF6AC SL4ACMerchandiser Hardware:PM7024 - Bur Merchandise Unit BM98499980259 - Brochure Carbide Bur

50 B900 BM98

Wall Mounted MerchandisersBM200 SA100 SA140 SA200 SA300 SA500 SA600

SC100 SC200 SC300 SC400 SC500 SC600 SD100 SD140 SD300 SD500 SE100 SE300 SE500 SE600 SF100 SF300 SF400 SF500 SG100 SG130 SG200 SG300 SG500 SH200 SH500 SH600 SL100 SL200 SL300 SL400 SL600 SM300 SM400 SM500 SM600 SA3AC SC1AC SC3AC SC5AC SD3AC SF3AC SF5AC SF6AC SL4ACMerchandiser Hardware:PM7026 - Bur Merchandise Unit BM200499980259 - Brochure Carbide Bur

50 B900 BM200

B200 SA300

Catalogue Code Size Ref.

Item #

B900 BM20

B900 BM98

B900 BM200

440

www.sutton.com.au