Carbocrete™

Antimicrobial Urethane Cement Flooring Systems

CARBOCRETE

Carbocrete urethane cement systems provide superior protection for harsh environments.

› Antimicrobial throughout entire film

› Excellent protection to Moisture Vapor Transmission (MVT)

› Thermal shock protection during high temperature wash cycles

› May be applied to green concrete

› Slip resistant

› High abrasion and chemical resistance

› Withstands high mechanical stress

› Extremely low VOC / low odor

› Suitable for use in USDA facilities

› Available in several configurations to meet a range of service requirements

Carbocrete flooring systems defend against bacteria and viruses for the life of the coating.Carbocrete incorporates Polygiene®, silver ion nanotechnology through the entire film of the coating. It’s vital protection you can stand on.

CARBOCRETE

DISTILLERIES & BREWERIES

FOOD & BEVERAGE

HEALTHCARE & PHARMACEUTICAL

MEAT, POULTRY, & SEAFOOD

CHEMICAL PROCESSING

FOOD PREPARATION

Moisture Vapor Barrier

Application Suitability

Conventional Floor CoatingA conventional floor coating will blister due to moisture vapor lifting the coating from the surface.

Carbocrete Flooring SystemsCarbocrete diverts the moisture vapor through a defined pore matrix keeping the coating intact and the floor protected.

CARBOCRETE

Carbocrete HF & RT (1/4 to 3/8-inch)Carbocrete HF (trowel applied) and Carbocrete RT (rake/trowel applied) provide ultimate temperature resistance and maximum durability.

Carbocrete SR (3/16 to 1/4-inch) Carbocrete SR is a slurry applied flooring solution to meet moderate to heavy duty service conditions.

Carbocrete HF @ 1/4-3/8”

› Unaffected by MVT

› Excellent impact resistance

› Excellent abrasion resistance

› Excellent thermal shock resistance

› 220°F – continuous temperature resistance

› 250°F – non-continuous temperature resistance

› Excellent chemical resistance

› Heavy anti-slip finish

› Cost effective solution

› Unaffected by MVT

› Very good abrasion resistance

› Very good thermal shock resistance

› 200°F – continuous temperature resistance

› 250°F – non-continuous temperature resistance

› Moderate anti-slip finish

› Decorative finish options

Carbocrete SR

Aggregate Broadcast

Carbocrete FC**Or other topcoat as

specified by Carboline

CARBOCRETE

Carbocrete SL (1/8 to 3/16-inch)Carbocrete SL is a self-leveling, slurry applied flooring system. It provides an excellent alternative to traditional epoxy floor systems.

Carbocrete Cove (1/8 to 3/16-inch) Carbocrete Cove provides a highly durable cove base which ensures a seamless, hygienic transition between floor and wall.

› Smooth finish; aesthetic appeal

› MVT resistance up to 12 lb./1,000 sq. ft. per 24 hours

› Thermal shock resistant

› Abrasion and chemical resistant

› 180°F – continuous temperature resistance

› 220°F – non-continuous temperature resistance

› Anti-slip properties

› Contains Polygiene for antimicrobial protection

› 220°F – continuous temperature resistance

› 250°F – non-continuous temperature resistance

Carbocrete Cove completes your Carbocrete system to ensure maximum protection against chemicals and bacteria.

Carbocrete Cove

Carbocrete SL

Aggregate Broadcast

Carbocrete FCUV**Or other topcoat as

specified by Carboline

CARBOCRETE

Performance Attributes

Recommended Areas for Use

Standard Colors

RESISTANT TO CHEMICAL ATTACK

Hydrochloric Acid 10% Methanol Sulphuric Acid 10% Sugar Syrups Citric Acid 10% Caustic Soda Acetic Acid 5% Petrol Lactic Acid 10% Oil Ingredients Phosphoric Acid 5% Detergents

INHIBITS BACTERIAL GROWTH

SARS-CoV Salmonella Typhi MRSA Enterococcus Faecalis E-coli Staphylococcus Aureus Listeria Streptococcus Pyogenes C.difficile Pseudomonas Aeruginosa Proteus Vulgaris Campila Bacta

Carbocrete HF/RT Carbocrete MF Carbocrete SR Carbocrete SL Carbocrete IF

Temperature Resistance (continuous) 220°F 180°F 200°F 180°F 220°F

Dry Process (light to medium traffic) Dry Process (medium to heavy traffic) Wet Process (light to medium traffic) Wet Process (medium to heavy traffic) Industrial Kitchens / Wash Areas Packaging Areas Chemical / Solvent Storage Loading Docks Laboratories Cold Rooms / Freezers Heavy Manufacturing / High Impact Areas

Colors shown are ink representation of actual colors. Actual product appearance may vary due to product, gloss, surface texture or method of application. Contact Carboline if a representative product sample is needed.

Khaki (Q205)

Green (Q302)

Cream (Q202) Tan (Q204) Safety Yellow (Q603)

Dark Gray (Q704)Mid Gray (Q703) Red (Q501)

CARBOCRETE

Additional ProductsURETHANE CEMENT PRODUCTS DESCRIPTION USES

Carbocrete IF An extreme, heavy duty, iron filled urethane cement flooring system (contains Polygiene).

Used wherever heavy impact, high thermal shock or high MVT conditions exist.

Carbocrete MF A medium duty, urethane cement flooring system with a smooth, matte finish (contains Polygiene).

Used to protect dry process areas, packaging areas and laboratories.

Carbocrete FCAn optional, urethane cement primer for porous concrete/outgassing concerns or a semi flexible, urethane cement, pigmented sealer (contains Polygiene).

Used as a complimentary urethane cement primer or sealer. Typical topcoat for Carbocrete SR and Carbocrete SL flooring systems.

Carbocrete FCUV A UV stable, semi-gloss, urethane cement floor sealer (contains Polygiene).

Used as a complimentary, UV resistant urethane cement sealer.

Carbocrete SR Sealer A pigmented, polyurethane sealer for broadcast systems (contains Polygiene).

Used as a lock coat for Carbocrete SR or Carbocrete SL urethane cement flooring systems.

CONCRETE REPAIR DESCRIPTION USES

Carbocrete 4000 A cement based, high performance underlayment (trowel applied).

Used for sloping and patching floors. Protein-free formulation prevents the growth and spread of bacteria.

Carbocrete Fill A rapid setting, urethane cement underlayment. Used to repair damaged floor slabs or to create floor sloping.

Carboseal Flex Joint A UV resistant, 100% solids, semi-rigid polyurea joint sealant.

Used to fill construction joints, to protect joint edges and to seal open joints. It increases the life of your floor by reducing the areas where bacteria can grow.

Carboguard 501 A solvent free epoxy patching and surfacing compound.Used for repairing damaged concrete and for filling in narrow cracks. It can also be used as coving material for floor-to-wall transitions or lap joint areas.

EPOXY PRIMERS DESCRIPTION USES

Carboseal 702 A multi-purpose, 100% solids, thixotropic epoxy resin system.

Used as a thixotropic vertical primer, grout coat, binder and primer for cove base.

Carboseal 710 A specially formulated, trowel applied epoxy mortar system. Used for high traffic areas. Pigment Packs can be added if a color is desired.

Carboseal 720 A low viscosity, 100% solids epoxy primer for cement surfaces.

Used for priming concrete as part of an industrial flooring system.

Carboguard 1340 WB A two-component, waterborne epoxy primer Effective damp concrete substrates prior to topcoats that might otherwise be compromised by any surface moisture.

BINDERS/SEALERS/TOPCOATS DESCRIPTION USES

Sanitile 555 VOC A high performance, water based epoxy coating. Used as a water based epoxy topcoat or receiving coat for decorative flakes.

Carboseal 705 A high performance, 100% solids, self- priming epoxy floor coating.

Used as a receiving and seal coat for decorative broadcast floors. Universal Color Packs can be added if a color is desired.

Carboseal 725 A low viscosity, 100% solids epoxy resin binder and sealer with improved UV resistance and performance properties.

Used as a finish coat for color quartz or decorative flake systems.

Carboseal 816 A high-gloss, low odor polyurethane finish coat. Used as a UV resistant, pigmented polyurethane floor sealer for concrete, screeds or epoxy resin systems.

Carboseal 816 HAR An abrasion-resistant, low odor polyurethane finish coat. A lower gloss urethane that provides excellent abrasion resistance and protection for flooring systems.

Carboseal 985 A fast cure, polyaspartic coating that imparts excellent UV and chemical protection.

Used as a fast curing, UV stable sealer or receiving coat for flake and quartz broadcast systems.

GLOBAL MANUFACTURING PLANTS

GLOBAL REPRESENTATIONCoatings - Linings - Fireproofing

CARBOLINE COMPANYGLOBAL HEADQUARTERS2150 SCHUETZ ROADST. LOUIS, MO 63146 USAPH: +1-314-644-1000WWW.CARBOLINE.COM

ARGENTINA – BUENOS AIRESEINSTEIN 1095PARQUE INDUSTRIAL OKSGARÍN PROV. DE BUENOS AIRES, ARGENTINAPHONE: 54-3327-44-2222FAX: 54-3327-44-2223

CANADA – ONTARIO420 TAPSCOTT ROAD UNIT 5 SCARBOROUGH, ONTARIO M1B 1Y4, CANADAPHONE: 416-292-2361FAX: 416-298-5887

CHINA – DALIANHOU SHI CUN, DA WEI JIA ZHENJIN ZHOU DISTRICTDALIAN, CHINA 116110PHONE: 86-411-8789-8441, 8442, 8443, 8444FAX: 86-411-8789-8445

INDIA – CHENNAINO. 356 & 357 SIDCO INDUSTRIAL ESTATEAMBATTUR, CHENNAI 600 098INDIAPHONE: 91-22-28500321FAX: 91-22-28500323

INDONESIAPT CARBOLINE INDONESIA SOLUSIWISMA 77, TOWER 1 – 12TH FLJL. LETJEN S PARMAN KAV 77SLIPI, JAKARTA BARATINDONESIA 11410PHONE: +62-21-536-3070

ITALY – ALGHEROVIA MILANO 15020093 COLOGNO MONZESE (MI), ITALYPHONE: 3902-25 3751FAX: 3902-25 37560

JAPAN – AMAGASAKITERAMOTO UNYU SOKO CO., LTD 17MINAMIHATSUSHIMA-CHO, AMAGASAKI, 660-0833 JAPANPHONE: 81-3-3643-4501FAX: 81-3-3643-2951

NEW ZEALAND – TAURANGA91-111 OROPI ROADGREERTONTAURANGANEW ZEALANDPHONE: +64-7-5411-221FAX: +64-7-541-1310

NORWAY – LIERSTRANDAP.O. BOX 5933412 LIERSTRANDA, NORWAYPHONE: 47-32-857300FAX: 47-32-857301

PUERTO RICO – SAN LORENZOURB. APONTE #5SAN LORENZO, PUERTO RICO 00754PHONE: 787-736-4221FAX: 787-736-53133

SAUDI ARABIA – DAMMAM1ST INDUSTRY CITY, 28TH STREETP.O. BOX 1050 DAMMAM 31431, KINGDOM OF SAUDI ARABIAPHONE: +966-3-847-3044FAX: +966-3-847-3689

SOUTH AFRICA – JOHANNESBURG8 CRESSET ROADMIDRAND INDUSTRIAL PARKJOHANNESBURG, SOUTH AFRICAPHONE: 27-11-2545500FAX: 27-11-310-2872

SOUTH KOREA – BUSAN43-1, JINYOUNG-RIJINYOUNG-EUBKIMHAE-CITY, 621-800KYOUNGSANGNAMDO, KOREAPHONE: 82-55-343-6441/5FAX: 82-55-343-6414

THAILANDDIMET (SIAM) PUBLIC COMPANY LIMITED.602 MOO 2 BANGPOO INDUSTRIAL ESTATEBANGPOOMAI, MUANGSAMUTPRAKARNTHAILANDPHONE: 66-2-323-2800

TURKEY – BURSAALI OSMAN SONMES CAD. NO:4BURSA, DOSAB 16369 TURKEYPHONE: 90-224-261-0537

UAE – DUBAIP.O. BOX 3034DUBAI, UAEPHONE: 971-4-347-0460FAX: 971-4-347-0242

USA – DAYTON 95 AIRPARK VISTA BLVD.DAYTON, NV 89403PHONE: 775-246-0760FAX: 775-246-0763

USA – GREEN BAY614 ELIZABETH STGREEN BAY, WI 54302PHONE: 920-437-6561FAX: 920-437-8546

USA – LAKE CHARLES900 OPELOUSAS STREETLAKE CHARLES, LA 70601PHONE: 337-433-0605FAX: 337-439-0380

USA – LOUISA321 DUKE ST.LOUISA VA 23093 PHONE: 540-967-5119FAX: 540-967-5120

VENEZUELA – VALENCIAURBANIZACION INDUSTRIAL “EL TIGRE”AVENIDA PRINCIPALGALPÓN “H”VALENCIA EDO. CARABOBOVENEZUELAPHONE: 58-245-4000400FAX: 58-245-5642011

VIETNAM –TINH BINH DUONGLO D, 4R-CNKHU CONG NGNIEP MY PHUOC 3THI XA BEN CATVIETNAMPHONE: (84) 08-3822-7684

12-46-0819-660