12
CAREN TAILINGS DAM Julio Echevarría S.1, Luis Felipe Aguirre W.2, Luis San Martín M.3 1, Ingeniero Civil Codelco, [email protected] 2, Ingeniero Civil Codelco, [email protected] 3,Ingeniero Civil, SMI Ingenieros, [email protected]

CAREN TAILINGS DAM - cbdb.org.br 01 - Luis Felipe Aguirre W… · CAREN TAILINGS DAM Julio Echevarría S.1, Luis Felipe Aguirre W.2, Luis San Martín M.3 1, Ingeniero Civil Codelco,

Embed Size (px)

Citation preview

CAREN TAILINGS DAM

Julio Echevarría S.1, Luis Felipe Aguirre W.2, Luis San Martín M.3

1, Ingeniero Civil Codelco, [email protected]

2, Ingeniero Civil Codelco, [email protected]

3,Ingeniero Civil, SMI Ingenieros, [email protected]

• Caren Reservoir is located 90

km south west of Santiago

• It has served since 1986 for the

disposal of tailings generated

by El Teniente

• The dam was designed in 12

stages , with a final height of

about 140 m and capacity of 2

billion m3 (term of the live:

about year 2064)

• The dam is ready built up to

Stage 5

INTRODUCCTION

MAIN FEATURES OF THE STAGE 5

• Tailings Storage Capacity up to Stage 5 :710.000.000 m³

• Tailings Disposal Area :19 km²

• Total volume fillings up to Stage 5 :14.000.000 m³

• Height up to Stage 5 : 84m

• Crest Length :900m

• Upstream Slope (H: V) :2:1

• Downstream Slope (H: V) :2:1

DAM FOUNDATIONS

• The alluvial deposit in the valley

reach depths of up to 115 m.

• The first 10 m correspond to fluvial

low density sands, potentially

liquefiable. This soil was replaced

with compacted materials

• Below that soil, exists gravel with

some clay lenses and clayey sands.

SLOPE STAGE 4

SLOPE STAGE 5

DESCRIPTION OF THE DAM

• Up to Stage 4, dam had a core of fine material located on the

upstream face and in the downstream shell, a coarse material.

Between the two sectors, a drainage chimney system was placed.

2.5

1

31

1a Etapa: 181.4

2a Etapa: 192.7

3a Etapa: 201.6

4a Etapa: 209.8

1A

11

1

1.5 2.5

1

2

1

23

4

5

Dren Chimenea

DESCRIPTION OF THE DAM

• Due to the low availability of materials, near the dam. In the stage

5, downstream shell material was replaced for a quarried rock, and

chimney drain was eliminated.

31

4a Etapa: 209.8

5a Etapa: 219.02

1

21

2.51

4a Etapa: 209.8

5a Etapa: 219.0

1A

2B

21

2

13B

21

3A

• The proposal of the new

design was to change the

downstream shell material.

SPECIFICATIONS OF MAIN MATERIALS

• Materials 1A: Impervious Core Material

– Fines Percentage (#200) : 25-70%

– Maximum Size 3” : only isolated boulders.

– Plasticity Index : 5-25

– Layers of 30cm thickness

– Density compaction of 95% of Modified Proctor

• Materials 3B: Massive Rockfill

– Maximum Size : 85% layer thick

– Size 1” :<50%

– Fine material (#200) : <6%

– Uniformity coefficient : D60/D10>15

– Layers of 80 cm thickness

– Minimum density : 2, 12 T/m3.

– Compaction: 6 passes, 5t/m static weight roller

DESCRIPTION OF THE DAM

• For Stage 5 was chosen a downstream slope of 2:1 (H: V). In the

following stages, the slope will be increased up to 1.6:1 (H: V).

31

4a Etapa: 209.8

12a Etapa: 276.0

2

1

1.61

2.51

1.71

1.75

11.8

1

1.851

1.91

11a Etapa: 270.0

10a Etapa: 262.0

9a Etapa: 254.0

8a Etapa: 246.0

7a Etapa: 237.0

6a Etapa: 228.0

5a Etapa: 219.0

1.951

21

3B

1A

2B3A

FEBRUARY 27 2010 EARTHQUAKE BEHAVIOR

• Earthquake of 8,8 Richter

magnitude (Epicentre was located

400 km from the dam)

• At that time, 25% of stage 5 was

built.

• Only minor cracks (5 to 6 mm)

were detected near the

abutments.

CONCLUSIONS

• Change the materials had a big impact to reduce costs

and schedules.

• The “new” design was immediately tested, due to a big

earthquake. The dam had a good behavior.

• This innovative change is being taking account in future

projects and studies on Codelco.

THANKS

DYNAMIC ANALISYS

• Sismo de Diseño:

– Magnitud: 8.0

– Aceleración máxima horizontal:

0,88g

– Aceleración máxima vertical:

0,57g

• Resultados Etapa 12

– Máximo Horz. : 0,4 m

– Remanente Horz : 0,1 m

– Máximo vertical. : 0,2 m

– Remanente vert. : 0,1 m

– Acel. Max. Horz. : 0,56 g

FLAC (Version 6.00)

LEGEND

25-Nov-08 17:24 step 0 2.800E+03 <x< 3.406E+03 -1.391E+02 <y< 4.666E+02

User-defined GroupsFundacionLama-E1Lama-E2Lama-E3Lama-E4Lama-E5Lama-E6Lama-E7Lama-E8Lama-E9Lama-E10Lama-E11Lama-E12Espaldon-E1Nucleo-E1Nucleo-E2Espaldon-E2Nucleo-E3

-0.500

0.500

1.500

2.500

3.500

4.500

(*10^2)

2.850 2.950 3.050 3.150 3.250 3.350(*10^3)

JOB TITLE : Embalse Carén : Alternativa Crecimiento Nucleo - Enrocado

FLAC (Version 6.00)

LEGEND

25-Nov-08 17:24 step 0 2.800E+03 <x< 3.406E+03 -1.391E+02 <y< 4.666E+02

User-defined GroupsFundacionLama-E1Lama-E2Lama-E3Lama-E4Lama-E5Lama-E6Lama-E7Lama-E8Lama-E9Lama-E10Lama-E11Lama-E12Espaldon-E1Nucleo-E1Nucleo-E2Espaldon-E2Nucleo-E3

-0.500

0.500

1.500

2.500

3.500

4.500

(*10^2)

2.850 2.950 3.050 3.150 3.250 3.350(*10^3)

JOB TITLE : Embalse Carén : Alternativa Crecimiento Nucleo - Enrocado

0 10 20 30 40 50 60 70 801−

0.8−

0.6−

0.4−

0.2−

0

0.2

0.4

0.6

0.8

1

Acelerograma

Tiempo (s)

Ace

lera

ción

Hor

izon

tal (

g)ax

1⟨ ⟩

X10⟨ ⟩