TRIPODFLOOR LAMPUSER GUIDE

5YEARS

Aftercare andTroubleshooting

5 year guarantee

At John Lewis & Partners we test every light to high quality standards so we are able to offer you a 5 year guarantee.

Specification

Recycling

Caring foryour product

This symbol indicates that this product should not be treated as normalhousehold waste and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.

Please retain these instructions for future reference.

John Lewis Partnership171 Victoria StreetLondon SW1E 5NNjohnlewis.com

Made in China

Please ensure all screws and small pieces are properly tightened to the product.

When changing a bulb, always switch off the mains and allow the bulb to cool down before handling.

A bulb’s watt rating indicates how much energy it uses. The higher the watt,the more energy it requires. Lumens is a measure of brightness. The higher the number of lumens, the brighter the light.

We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish.

Replace bulbs from John Lewis or established brand of the same type and compatibility.

Max. power: 60WVoltage: 220–240V~50HzIP rating: 20Weight: 3.3 kg

Thank you for purchasing this Tripod Floor Lamp.Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.

1 PC

6 PCS

1 PC

2 PCS

1 PC

1 PC

A

B

D

E

F

Description

Socket + Tubes

Tube With Cord

D-1 Tubes

Shade

Socket Ring

C Tubes

Image Quantity Parts list

Recommendedbulb

Introduction

Warnings

01

10 watt E27 LED bulbBulb is replaceableBulb not included

This lamp is for indoor use only.

This product is Class II.

The supply cord cannot be replaced. If the cord is damaged, the floor lamp shouldbe destroyed in order to avoid a safety hazard.

Always use the correct type and rated power bulb. Never exceed the rated powerstated.

Dispose of used bulbs carefully.

1. Carefully unpack the carton, making sure all parts are included before assembly. Place lamp parts on a flat surface.

NOTE: The tube shapes are different, tubes (B) and (C) are straight; tubes (D) and (D-1) are tapered at the bottom.

2. Screw tube (B) into tube (A) to until tight.

3. Screw tube (C) clockwise into tube (B) until tight. Repeat for each leg.

4. Screw tube (D-1) clockwise into tubes (C) until tight.

5. Screw tube with cord (D) cloockwise into tube (C) until tight.

NOTE: You may need to pull any excess cord gently through the tube (D)

5. Place shade (E) onto socket and then screw on socket ring (F) to secure shade.

0202

Product assembly

A

B

C C

D

D-1

D-1

B

C

F

E