Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
WeatherproofCovers
In-Use Weatherproof
Covers
Lampholders
WeatherproofFixture
“T” Boxes
Carlon® Weatherproof Covers, Lampholders and Fixtures
Table of Contents
Weatherproof Covers – Nonmetallic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3
In-Use Weatherproof Covers – Nonmetallic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Weatherproof Lampholders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
Weatherproof Fixture & “T” Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9
Contents
Carlon® Weatherproof Covers, Lampholders and Fixtures
w w w . c a r l o n . c o m 1
Weatherproof Covers – Nonmetallic
Box Mounting:1. TURN OFF POWER.2. Place gasket on top of outlet box.
3. Attach the device to the box.
4. Fasten cover to outlet box.
Note: These covers must be mounted in accordance with all local and NEC/CEC requirements.
Device Mounting:1. TURN OFF POWER.2. Place gasket on top of outlet box.
3. Fasten cover to outlet box.
4. To ensure a weatherproof seal, use a 1/4" minimum bead ofRTV type silicone, neoprene, urethane, or polyurethane caulkingbetween gasket and mounting surface.
Note: These covers must be mounted in accordance with all local and NEC/CEC requirements.
InstallationIncludes base, cover, gasket, and mounting screws
Carlon® Nonmetallic Weatherproof Covers
Paintable surface with
textured finishto hide
scratches Snap-off lids foreasy access totop screw holes
Box or devicemount
Polycarbonatematerial for
extra strengthand durability
• UV Resistant – Suitablefor outdoor use
• Fits all standard receptacles
• Nonmetallic/Noncorrosive
• UL Marine Listed
• CSA Certified
w w w . c a r l o n . c o m2
Weatherproof Covers – Nonmetallic
Single Gang – Vertical Mount
15 AMP ReceptacleFor 15 amp or other single receptacles under 1.375" diameter.
30 AMP ReceptacleFor 30 amp or other single receptacles under 1.750" diameter.
50 AMP ReceptacleFor 50 amp or other single receptacles under 2.250" diameter.
Duplex Receptacle
GFI ReceptacleDevice opening dimensions: 2.63" H x 1.31" W.
20 AMP ReceptacleFor 20 amp or other single receptacles under 1.625" diameter.
E42728
LR31146
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98SRCN-CAR Grey 10 2.1
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98G20N Grey 20 4.1
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98G30N-CAR Grey 10 2.1
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98GCBN Grey 20 3.9
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98SSCN-CAR Grey 10 2.1
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98G5FN-CAR Grey 10 2
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98GDRN-CAR Grey 10 2
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98GFCN-CAR Grey 10 2
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98TSCN-CAR Grey 5 1.1
• For use in wet/damp locations• Mounts to a box or device• Nonmetallic. Won’t rust or fade
• Paintable• Easy to install• Made in the U.S.A.
Circuit BreakerFor circuit breaker applications up to 4 single poles. Deviceopening dimensions: 2.845"H x 2.265"W.
Single Switch
Toggle Switch
BlankFits Carlon® single gang FS boxes. Supplied with stainlesssteel mounting screws and gasket.
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E980CN-CAR Grey 12 1.60E980CM-CAR White 12 1.60
w w w . c a r l o n . c o m 3
Weatherproof Covers – Nonmetallic
Double Duplex Combination Toggle/GFI
Combination Toggle/Duplex ReceptacleDouble Toggle
Duplex Receptacle GFI Horizontal
Two GangFits Carlon® two gang FS boxes and other nonmetallic and metallic FS boxes. Supplied with stainless steel mounting screws and gasket.
Single Gang – Horizontal Mount
Double Gang
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98DHGN-CAR Grey 10 3.9
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E9G2DDN-CAR Grey 10 2.3
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E9G2SSN Grey 6 3.2
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E9802CN-CAR Grey 10 2.17
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E9G2DSN-CAR Grey 10 1.3
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E98GHGN-CAR Grey 10 1.9
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
E9G2GTN-CAR Grey 5 1.3
• For use in wet/damp locations• Mounts to a box or device• Nonmetallic. Won’t rust or fade
• Paintable• Easy to install• Made in the U.S.A.
Device opening dimensions:2.63"W x 1.31"H.
w w w . c a r l o n . c o m4
In-Use Weatherproof Covers – Nonmetallic
Carlon® Nonmetallic In-Use Weatherproof Covers
Paintable surfacewith textured finish to hide
scratches
Polycarbonate/PVC material forextra strengthand durability
Lockable:drill a 7/32"hole
Raised Rib
Box Mounting:1. TURN OFF POWER.2. Mount electrical device to outlet box.
3. Place gasket on top of outlet box.
4. Fasten cover to outlet box.
5. Secure insert plate to cover.
6. Lockable feature – Drill a 7/32" hole in cover – starting point provided.
Note: These covers must be mounted in accordance with all local and NEC/CEC requirements.
• NEMA Type 3R Rated
• Meets NEC Article406.8(B) and CECSubrule 26-702
• UV Resistant – suitable for outdoor use
• Fits all standard receptacles
• Nonmetallic/Noncorrosive
• UL Listed
• CSA Certified
InstallationIncludes base, cover, device plates, gasket, and mounting hardware
InsertPlate
CoverAssembly
Raised Rib
Cover Gasket
DeviceMounts to
FS Box
w w w . c a r l o n . c o m 5
In-Use Weatherproof Covers – Nonmetallic
Part No. Color Std. Ctn. Qty. Std. Ctn. Wt. (lbs.)
E9UVGRN2 Grey 12 7.2E9UVWRN2 White 12 7.2E9UVCRN2 Clear 12 7.2
Part No. Color Std. Ctn. Qty. Std. Ctn. Wt. (lbs.)
E9UHGRN2 Grey 4 2.3E9UHWRN2 White 4 2.3E9UHCRN2 Clear 4 2.3
E42728LR31146• For use in wet/damp locations
• Weatherproof while in use• Mounts to a box or device
• Nonmetallic. Won’t rust or fade• Paintable
• Easy to install• Made in the U.S.A.
Single Gang
Double Gang
Standard Covers – 2.64" Depth
Standard Covers – 2.64" Depth
Standard Covers – 2.53" DepthVertical Mount
Part No. Color Std. Ctn. Qty. Std. Ctn. Wt. (lbs.)
E9UDVGRN2 Grey 8 5.9E9UDVWRN2 White 8 5.9E9UDVCRN2 Clear 8 5.9
Deep Covers – 4.14" DepthVertical Mount
Horizontal Mount
Part No. Color Std. Ctn. Qty. Std. Ctn. Wt. (lbs.)
E9U2GRN2 Grey 6 5.7E9U2WRN2 White 6 5.7E9U2CRN2 Clear 6 5.7
• For use in wet/damp locations• Weatherproof while in use• Mounts to a box or device
• Nonmetallic. Won’t rust or fade• Paintable
• Easy to install• Made in the U.S.A.
Inserts: Inserts:
Inserts:
Inserts:
w w w . c a r l o n . c o m6
Weatherproof Lampholders – Nonmetallic
Carlon® Nonmetallic Weatherproof Lampholders
Paintablesurface
PVC material will not rust or corrode
Secure, stay-in-place lightingarms
Porcelain sockets –reduces the needfor replacement
Silicone gaskets to keepmoisture out evenin upright position
Tool and no-tool
adjustment
• UV Resistant – Suitablefor outdoor use
• Accepts 150 watt max or 300 watt (incandescent only)
• Nonmetallic/Noncorrosive
• UL and c-UL Listed
• Approved for upward usein wet locations
Installation Instructions1. TURN OFF ELECTRICITY BEFORE STARTING.
2. Bring power leads into the outlet box and connect using proper wire nuts or insulation materials.
3. Use drill or nail to knock out holes on lampholder cover that align with outlet box. When completed,be sure visual perimeter of weatherproof gasket is evento assure proper seal.
4. Floodlight lampholders can be positioned using two different adjustments. Loosen locknut to turn lampholder assembly to desired position. Tighten locknut. Then depress pushbutton to adjust lampholder to final position.
InstallationIncludes gasket, four lug nuts and two mounting screws
Available with roundor rectangular cover
w w w . c a r l o n . c o m 7
Weatherproof Lampholders – Nonmetallic
Rectangular
Lampholder with Rectangular Cover
No-Tool-Lampholder with Round Cover
Lampholder with Round Cover
Closure Plugs
E70380E183934
Except where noted by• For use in wet/damp locations• Ideal for residential or commercial
applications – security/landscape• Mounts to a device box
• Nonmetallic. Won’t rust or fade• Paintable• Easy to install• Stay-in-place lighting arms
Lampholders
Covers
Accessories
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
P8010W-CAR White 6 3.9
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
P8060W-CAR White 6 5.8
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
P8005W-CAR White 6 3.8
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
P7701W-CAR White 30 1.3
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
P7901W-CAR White 12 .9
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
P8001W-CAR White 24 5.5
Part No. Color
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
P7801W-CAR White 16 1.6
Round
No-Tool-Lampholder with Gasket
w w w . c a r l o n . c o m8
Weatherproof Fixtures – Nonmetallic
Carlon® Nonmetallic Weatherproof Fixtures
Twist-on/lock-onsocket assembly
Universal Mounting Base
Ceramic screwshell
Polyestermaterial.
High heatand impactresistance.
3/4"threaded
hubs
• Designed for indoor or outdoor use
• One-piece design with 20.25 cu. in.capacity
• Approved for dwelling
• Acceptable for barn applications
• Junction box approved
• Approved for 60° AWG wire withuse of 150 watt lamp (temp glassglobe required)
• Approved for through branchwiring – accommodates 8 no. 12AWG through branch circuit con-ductors
• UL and c-UL Listed
• UL Marine Listed
Installation Instructions1. Disassemble fixture from base.
2. Make wire terminations according to the NEC or local electrical codes.
3. Fold fixture wire into fixture base.
4. Twist on socket assembly.
5. Fixture assembly is ready for lamp and globe installation.
Note:
• Plastic globes mounted in a VERTICAL POSITION(globe pointing down) can only use a maximum lamp size of 60 watts
• Glass globes mounted in a VERTICAL POSITIONcan only use a maximum lamp size of 100 watts
• HORIZONTAL mountings have a maximum lamp Size of 60 watts
• It is NOT RECOMMENDED to mount plastic globes horizontally for incandescent applications.
• Carlon Weatherproof Fixture Bases and Globes are SOLD SEPARATELY
InstallationIncludes gasket, four lug nuts and two mounting screws
w w w . c a r l o n . c o m 9
Weatherproof Fixtures – Nonmetallic
• Suitable for use in wet/damp locations• Designed for indoor or outdoor use• 20.25 cu. in. capacity• Easy to install
• Nonmetallic. Won’t rust or fade• One-piece design• Approved for through branch wiring
Weatherproof Fixture
Weatherproof Lighting Globes
Weatherproof “T” Boxes
Base
Rippled PolycarbonateClear Glass
Clear Polycarbonate
Carlon® Weatherproof “T” Boxes are for use with nonmetallicwiring systems only. Can be used with Carlon Lampholder.
Single Gang “T” BoxWith three 1/2" threaded holes. Mounting feet included.
Double Gang “T” BoxWith three 1/2" and four 3/4"threaded holes. Mounting feetincluded.
Round “T” BoxWith five 1/2" threaded holes. Mounting feet included.
*E381D-CAR, E365D-CAR and E382DE are for use withnonmetallic wiring systems only.
Part No.HubSize
Std.Ctn. Qty.
Std. Ctn.Wt. (lbs.)
E962E 3/4" 6 4.5
Part No.Std.
Ctn. Qty.Std. Ctn.Wt. (lbs.)
E960GLB (Clear Glass) 6 6.6
Part No.Std.
Ctn. Qty.Std. Ctn.Wt. (lbs.)
E960PGL(Clear Plastic) 6 6.6
Part No.Std.
Ctn. Qty.Std. Ctn.Wt. (lbs.)
E960GFL 6 4.9
Part No. Color Size
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
*E381D-CAR Grey 1/2" 10 2.3*E381DW-CAR White 1/2" 10 1.8
Part No. Color Size
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
*E365D-CAR Grey 1/2" 10 1.2*E365DW-CAR White 1/2" 10 1.2
E183934
E42728Where noted by
Part No. Color Size
Std.Ctn.Qty.
Std.Ctn. Wt.
(lbs.)
*E382DE Grey 1/2" 6 3.6*E382DEW White 1/2" 6 3.6
Thomas & Betts CorporationElectrical Division8155 T&B Boulevard • Memphis, Tennessee 38125 1-800-816-7809 • Fax: 1-800-816-7810www.carlon.com
7F3 9/08© 2008 Thomas & Betts Corporation