Upload
nubia-elisio
View
55
Download
0
Tags:
Embed Size (px)
Citation preview
Catalog2800CT1001R04/12
2012Class 2800
Electric Vehicle Charging SolutionsPowering the Future of Sustainable Mobility
CONTENTS
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Indoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Outdoor Charging Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
Wall-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6Pedestal-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
DC Quick Charging Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10
RFID Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 14
Electric Vehicle Charging SolutionsDescription
© 2011–2012 Schneider ElectricAll Rights Reserved
2
Schneider Electric has developed a line of Electric Vehicle (EV) charging solutions for your unique needs. Schneider Electric will work with you to deliver the best charging infrastructure solution that includes product, installation, maintenance, and an infrastructure management system.
Our EV charging products are compatible with safety standards and industry specific standards, such as the Society of Automotive Engineers standards (SAE J1772).
Description Smart Charging, Smart Savings, Smart Grid
Residential Charging SolutionsOur residential charging stations provide simple, easy-to-install, and user-friendly solutions for charging electric vehicles at home. Installations are provided by a network of licensed installers.
Commercial and Fleet Charging SolutionsFleet and commercial customers can count on charging solutions that offer convenient public and private access.
DC Quick Charging SolutionsThe EVlink™ DC Quick Charger allows users to charge 80 percent of the battery in less than 30 minutes and provides a simple, efficient and safe way to quickly charge electric vehicles.
EVlink DC Quick Charging Stations are CHAdeMO compliant.
Electric Vehicle Charging SolutionsIndoor Charging Stations
3© 2011–2012 Schneider ElectricAll Rights Reserved
Indoor Charging Stations
Features
Catalog Numbers
Indoor Charging Station
Residential Applications
• Segmented charge and delay charge progress indicator
• Stop Button and Indicator• Power status and system
detected fault indicator• Delay button and indicator
Cable Holder:
• Supports and helps organize the cable• Independently mounted from enclosure
Connector and Cord:
• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)
Enclosure:
• Non-metallic• Indoor wall-mount
(stud, drywall, or masonry wall)
Protection:
• Integral Ground Fault Protection at 5 mA• Ground fault function tested before each charge
cycle begins• Auto restart after ground fault or main power loss
Interface:
Table 1: Indoor Charging Station—Wall-Mount
Catalog Number
Output Voltage System
Output Current
Mounting Type
Charging Units
Application Features
EV2430WS 240 Vac only 30 A Wall Single Indoor Delay Start
Electric Vehicle Charging SolutionsIndoor Charging Stations
© 2011–2012 Schneider ElectricAll Rights Reserved
4
Technical Specifications
N L1 L2
OvercurrentProtection
Device
120/240 Vac Only
EquipmentGround
SolidNeutral
240 V
120 V
120 V
Ground
ElectricVehicle
ChargingStation
Figure 1: Indoor Charging Station Wiring Diagram
Table 2: Indoor Charging Stations
Power Specifications
Input Power240 Vac Only, single-phase, 60 Hz, 30 A maximum
Input Power Connection Line 1, Line 2, and Ground
Feeder Circuit Breaker 2-pole, 40 A, non-GFCI type
Output Power 240 Vac, 30 A, 7.2 kW max.
Physical SpecificationsEnclosure Type Type 1 (Indoor only)
Enclosure Dimensions (W x H x D)9.53 x 12.73 x 4.36 in.(242 x 323 x 111 mm)
Enclosure Mounting Wall-mount
Cable Type SAE J1772
Cable Length 18 ft. (5.5 m)
Cable Management Non-retractable, separate from the enclosure
Shipping Weight 17.0 lbs. (7.71 kg)
User InterfacePower Available Status indicator
Charging Eight-segment progress indicator
Ground Fault Red status indicator
Stop Push button and red stop indicator
Delay StartPush button to delay up to eight hours, in one-hour increments
ProtectionGround Fault Protection Integral, CCID 5 mA, auto reset
Ground Fault Protection System Test Automatic at the beginning of each charge cycle
EnvironmentalOperating Temperature -22°F to 131°F (-30°C to 55°C)
Electro-static Discharge 15 kV open air, 8 kV contact
Surge 6 kV
Radiated Immunity 20 V/m
Conducted Immunity 20 V
Electrical Fast Transient/Burst (EFTB) 2 kV
Emissions FCC Class B
Standards ComplianceNEC Article 625
SAE J1772
UL 2594, UL 2231-1, UL 2231-2, UL 991, UL 1998, and UL 2251
Electric Vehicle Charging SolutionsIndoor Charging Stations
5© 2011–2012 Schneider ElectricAll Rights Reserved
DimensionsFigure 2: Indoor Charging Station
in.(mm) Dimensions:
9.53(242)
12.7(323)
4.4(111)
Figure 3: Cable Bracket
3.1(79)
5.5(140)
5.2(132)
8.2(208)
1.5(38)
3.3(84)
4.3(109)
4.5(114)
.25(6.4)
3.0(76)
1.5(38)2x
1.25(32)2x
6x
in.(mm)Dimensions:
Electric Vehicle Charging SolutionsOutdoor Charging Stations
© 2011–2012 Schneider ElectricAll Rights Reserved
6
Outdoor Charging Stations
Wall-Mount
Features
Catalog Numbers
Interface:
• Power status• Charge indicator• System detected fault indicator
Cable Holder:
• Connector dock• Supports and helps organize the cable• Independently mounted from enclosure
Connector and Cord:
• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)
Enclosure:
• Metallic enclosure• Indoor/outdoor wall-mount
Outdoor Charging Station (Wall-Mount)
Residential and Commercial Applications
Authentication:
• Localized RFID solution (optional)
Protection:
• Integral Ground Fault Protection at 5 mA• Ground fault function tested before each charge
cycle begins• Auto restart after ground fault or main power loss
Table 3: Outdoor Charging Stations—Wall-Mount
Catalog Number
Output Voltage System
Output Current
Mounting Type
Charging Units
Application Features
EV230WSR 208–240 Vac 30 A Wall Single Indoor/Outdoor —
EV230WSRR 208–240 Vac 30 A Wall Single Indoor/Outdoor RFID (non-networked)
Electric Vehicle Charging SolutionsOutdoor Charging Stations
7© 2011–2012 Schneider ElectricAll Rights Reserved
Pedestal-Mount
Features
Catalog Numbers
Table 4: Outdoor Charging Stations—Pedestal-Mount
Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Authentication
EV230PSR 208–240 Vac 30 A Pedestal Single Outdoor —
EV230PDR 208–240 Vac 30 A Pedestal Dual Outdoor —
EV230PSRR 208–240 Vac 30 A Pedestal Single Outdoor RFID (non-networked)
EV230PDRR 208–240 Vac 30 A Pedestal Dual Outdoor RFID (non-networked)
Interface:
• Power status• Charge indicator• System detected fault indicator
Cable and Connector Holders:
• Support and help organize cables• Connector storage• Integral with the enclosure
Connector and Cable:
• Complies with SAE J1772• Cable length: 18 ft. (5.5 meter)
Enclosure:
• Metallic enclosure• Pedestal-mount
Protection:
• Integral Ground Fault Protection at 5 mA• Ground fault function tested before each charge cycle begins• Auto restart after ground fault or main power loss
Outdoor Charging Station (Single Unit, Pedestal-Mount)
Commercial Applications
Authentication:
• Localized RFID solution (optional)
Mounting:
• Metallic Pedestal
Outdoor Charging Station (Dual Unit, Pedestal-Mount)
Commercial Applications
Electric Vehicle Charging SolutionsOutdoor Charging Stations
© 2011–2012 Schneider ElectricAll Rights Reserved
8
Technical Specifications
Outdoor Pedestal-Mount Charging Stations
Outdoor Wall-Mount Charging Station
Single Unit Dual Unit
Table 5: Outdoor Charging Stations (Wall and Pedestal Mount)
Power Specifications (Each charging unit)
Input Power 208–240 Vac, 30 A, single phase, 60 Hz
Input Power Connection Line 1, Line 2, and Ground
Feeder Circuit Breaker 2-pole, 40 A, non-GFCI type
Output Power 208–240 Vac, 30 A
Physical Specifications
Enclosure Type Type 3R
Enclosure Dimensions See Dimensions on Page 9
Enclosure Mounting Wall or Pedestal
Cable Type SAE J1772
Cable Length 18 ft. (5.5 m)
Cable Management Non-retractable, integral with the enclosure
Unit OptionsSingle unit (Wall-mount)Single or Dual units (Pedestal-mount)
User Interface
Power Available Status indicator
Charging Blinking blue indicator
System Detected Fault Red status indicator
Authentication
Type Non-networked RFID authentication card
Programming Radio frequency remote control
Protection
Ground Fault Protection Integral, CCID 5 mA, auto reset
Ground Fault Protection System Test Automatic at the beginning of each charge cycle
Environmental
Operating Temperature -22°F to 131°F (-30°C to 55°C)
Electro-static Discharge 15 kV open air, 8 kV contact
Surge 6 kV
Radiated Immunity 20 V/m
Conducted Immunity 20 V
Electrical Fast Transient/Burst (EFTB) 2 kV
Emissions FCC Class B
Standards Compliance
NEC Article 625
SAE J1772
UL 2594, UL 2231-1 & UL 2231-2, UL 991, UL 1998 and UL 2251
Electric Vehicle Charging SolutionsOutdoor Charging Stations
9© 2011–2012 Schneider ElectricAll Rights Reserved
Dimensions
Figure 4: Outdoor Wall-Mount Charging Station
Figure 5: Cable Bracket with Connector Dock
9.8(250)
13.1 (333)
18.1 (460)
20.5 (521)
6.7(170)
7.1(181)
in.(mm)Dimensions:
4.0(102)
2.0(50.8)
3.8(97)
5.8(148)
5.0(127)
in.(mm)Dimensions:
Figure 6: Pedestal Base for Outdoor Charging Station
Figure 7: Outdoor Pedestal-Mount Charging Station
7.9(200) 5.9
(150)
7.9(200)
.70(17.5)
3.9(98)
4.1(103)2x
1.8(46)2x 4.3
(108)2x
2x
.80(20)2x5.9
(150)
4.9(125)
2x1.0(25)2x
4.1(103)
3.7(93)2x
4x R .30(7.5)
3.0(76.2)
Dimensions: in.(mm)
49.6(1260)
49.6(1260)
6.6(166.5)
6.6(166.5)
7.9(200)
7.9(200)
5.2(133)
Single Unit Dual Unit
13.0(330)
6.7(170)
13.0(330)
in.(mm)Dimensions:
Electric Vehicle Charging SolutionsDC Quick Charging Station
© 2011–2012 Schneider ElectricAll Rights Reserved
10
DC Quick Charging Station
The EVlink™ 50 kW charging station allows compatible vehicles to be recharged to 80% in approximately 30 minutes.
Features
NOTE: EVlink™ DC Quick Charging Stations are CHAdeMO compliant.
Wireless Communication Antenna (optional)
Connector and Cable:
• 125 A dc connector• CHAdeMO compliant• Cable length: 20 ft. (6.1 m)
Enclosure:
• Metallic enclosure• Pedestal-mount
RFID Authentication orCredit Card Reader (optional)
Metallic Pedestal
Touch Screen Display
• 5.7 in. backlit LCD touch screen• Display of residual charge and set point
Power Compartment Cover
Emergency Stop Button
Catalog Numbers
Table 6: DC Quick Charging Stations
Catalog Number Authentication Input VoltageInput
CurrentOutput Voltage
Output Current
Mounting Type
Charging Units
Application
EVF20850DTR RFID (non-networked)208 V, 3-phase 160 A
500 Vdc Max.
125 AMax.
Pedestal Single Outdoor
EVF20850DTB Credit Card Pedestal Single Outdoor
EVF24050DTR RFID (non-networked)240 V, 3-phase 140 A
Pedestal Single Outdoor
EVF24050DTB Credit Card Pedestal Single Outdoor
Electric Vehicle Charging SolutionsDC Quick Charging Station
11© 2011–2012 Schneider ElectricAll Rights Reserved
Technical Specifications Table 7: DC Quick Charging Stations
Power Specifications (Each charging unit)
Input Power 58 kVA
Input Power Connection
Control Compartment Line and Neutral
Power Compartment Line 1, Line 2, Line 3, and Ground
Feeder Circuit BreakerConductors feeding the charging station and the upstream overcurrent protection must be sized in accordance with local electrical codes.
Output Power 50 kW max.
Physical Specifications
Enclosure Type NEMA 3R
Enclosure Dimensions 84 x 42 x 34 in. (2138 x 1068 x 869 m)
Enclosure Mounting Pedestal
Cable Type CHAdeMO compliant 1
1 Schneider Electric will adapt to SAE when standard is released.
Cable Length 20 ft (6.1 m)
Cable Management Non-retractable, integral with the enclosure
Unit OptionsWireless communication antenna, User ID RFID tag reader, Credit Card Reader
Shipping Weight 1650 lbs (748 kg)
Authentication
RFID Card Option Charging station stored RFID card IDs
Major Credit Card Option Secure cellular network
Environmental
Operating Temperature -22°F to 122°F (-30°C to +50°C)
Storage Temperature -4°F to 176°F (-20°C to +80°C)
RoHS All elements are RoHs compliant
Standards Compliance and Certifications
UL 2202 Electric Vehicle (EV) Charging System Equipment
UL 2231-1 and 2231-2 Personnel Protection Systems for Electric Vehicles (EV) supply circuits
UL 2251 Plugs, Receptacles and Couplers for Electric Vehicles
Electric Vehicle Charging SolutionsDC Quick Charging Station
© 2011–2012 Schneider ElectricAll Rights Reserved
12
The DC Quick Charging Station includes a 7.5 inch LCD touch screen display. Additional options include an RFID tag reader and credit card reader.
The touch screen provides:
• User friendly graphic access
• Secure administrative access to change settings
• Usage, operation, and fault instructions
Touch Screen Display
Figure 8: Touch Screen Display and Other Options
A
B
C
A
Touch Screen Display+ RFID Reader
Touch Screen Display+ Credit Card Reader
(A) Touch screen
(B) RFID tag reader
(C) Credit card reader
Electric Vehicle Charging SolutionsDC Quick Charging Station
13© 2011–2012 Schneider ElectricAll Rights Reserved
Dimensions
Figure 9: DC Quick Charging Station
33.8(858.5)
26.8(680.7)
3.0(76)
73.9(1877)
83.4(2118.3)
87.5(2222.5)
42(1066.8)
20.2(513.1)
36.8(934.7)
21.1(535.9)
in.(mm) Dimensions:
© 2011–2012 Schneider ElectricAll Rights Reserved
Electric Vehicle Charging Solutions Radio Frequency Identification (RFID) Accessories
14
Radio Frequency Identification (RFID) Accessories
The RFID solution for Schneider Electric EV charging stations consists of the following accessories:
• Handheld Programmer
• RFID Authentication Card
Handheld Programmer
EVRFIDHP
Features• Used to add and remove users
• One needed for total charging station system
• Connects via radio frequency
• Feedback via audio tone and LED indicator on Proximity Reader
• 4-digit PIN access
Technical Specifications
Frequency 125 kHz / 62.5 kHz
Dimensions 7.0 x 2.5 x 0.75 in. (178 x 63.5 x 19 mm)
Weight 7 oz. (200 g)
Operating Temperature -22°F to 131°F (-30°C to 55°C)
Color Black
Material ABS
Description Catalog Number
RFID Handheld Programmer EVRFIDHP
RFID Authentication Cards
EVRFIDKF-10
Features• Wallet friendly
• Robust and durable design
• Industry standard format
• Unique ID codes
Technical Specifications
Frequency 125 kHz / 62.5 kHz
Weight 0.31 oz. (8.8 g)
Operating Temperature -40°F to 158°F (-40°C to +70°C)
Humidity 0–100% non-condensing
Material ABS
Description Catalog Number
RFID Authentication Card (Quantity of 10) EVRFIDKF-10
Electric Vehicle Charging SolutionsRadio Frequency Identification (RFID) Accessories
15© 2011–2012 Schneider ElectricAll Rights Reserved
Accessory DimensionsFigure 10: Handheld Programmer
Figure 11: RFID Authentication Cards
2.5(63.5)
7.0(178)
.75(19)
in.(mm)Dimensions:
2.13(54)
.034(.86)
3.37(85.5)
in.(mm)Dimensions:
2800CT1001R04/12 © 2011–2012 Schneider Electric All Rights Reserved
Schneider Electric USA, Inc.1601 Mercer RoadLexington, KY 40511 USA1-888-778-2733www.schneider-electric.us
Schneider Electric™ and EVlink™ are trademark owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are property of their respective owners.