Embed Size (px)
Citation preview
Traditional Challenges
Project Scope
• Site measurement of the existing showroom may be very time consuming due to the complexity of the area.
• Manual creation of floor plans and design documents may be costly and inaccurate • Reviewing the design on 2D Plans or computer screens will not give the client an
accurate perception of the environment
Bretts Timber & Hardware engaged Holovision 3D to assist in redesigning the floor layout for their Showroom in Windsor, Brisbane.
✓ 3D Laser Scanning ✓ 3D Modelling ✓ Mixed Reality
Case Study
DESIGN I MEASURE I VISUALISE holovision.com.au I [email protected]
Case Study
Using our 3D Laser Scanner we scanned the existing showroom and generated a 3D Point Cloud Model of the environment.
Using the 3D Point Cloud we were then able to produce a 3D Model in Sketchup with the
exact measurements and detail of the Showroom, down to the millimetre!
From here, we were then able to play around with the model, creating different design proposals for the showroom, without the need to re-draw or measure.
Finally, we uploaded the Sketchup Model into the Microsoft HoloLens. This allowed the
client to review the various design proposals in real-time, 1;1 scale. The client could interact with the 3D Model, not only getting a true feel for the users experience but altering it as
they came to roadblocks.
Reduced time creating 3D Model
100% Accuracy of Site Measurements
1:1 Real-time Visualisation
DESIGN I MEASURE I VISUALISE holovision.com.au I [email protected]
