Cat-CMP Cable Gland

8/17/2019 Cat-CMP Cable Gland

1/64


2/64

w w w . c m p – p r o d u c t s . c o m

Doc Ref : TPC 164 issue 04 2005

cmp

ATEX 95

• Cable Gland & Accessories• Meeting The Atex Hazardous

Area Directive

TRITON CDS• Cable Gland & Accessories• Cable Gland Selection Programme• Unique Design Features

ontheweb


3/64



As a leading manufacturer of metallic cable glands and

electrical mining products for global applications CMP

Products is committed to ensuring it remains the

number one choice in its markets.

CMP will retain status as the number one supplier by

continually striving to achieve standards of excellence

in our company through the continuous improvement

of our processes and functions. It is only by achieving

this that CMP will continue to offer unrivaled customer

service throughout the globe.

In order to reach these goals CMP Products has set

itself the following targets for the medium term;

To broaden, re-design and enhance its product

range to bring to the market an upgraded product

offering which will position CMP as the first

choice of Clients, and to continue this develop-ment process over the next five years.

To incur substantial investment in manufacturing

techniques, IT systems and training in order to

ensure CMP Products can offer unparalleled levels

of quality and customer service.

To develop strategic alliances with distributors and

end-users across the globe in order to provide

our products with access to a world class global

distribution network.

CMP ONLINEAs a leading manufacturer of metallic cable

glands and electrical mining products for

global applications CMP Products is

committed to ensuring it remains the

number one choice in its markets.

w w w. c m p - p r o d u c t s . c o m

MISSION STATEMENT

INVESTOR IN PEOPLE

VISION STATEMENT

To elevate the customer to the Centre of our activities and to employ

our endeavour to bring about a positive experience for everyone


4/64



Introduction

Gland Selection Guideline

CMP Displacement Seal Concept

Guide To Hazardous Area Cable Selection

Introduction To ATEX Directives

Ingress Protection

IndustrialIntroduction to CMP Industrial Cable Glands

A2 Unarmoured Cable Glands

SS2K (GP) Sureseal 2000 Unarmoured

A2RC Unarmoured - Conduit Connection

V-TEC (A2P) Industrial

A4 Armoured - S.T.A (Tape Armour) Outer Seal

BW Armoured Cable Glands

BWL Armoured Cable Glands

CW Armoured - S.W.A Outer Seal

CX/ Z Armoured - Braided or S.T.A (Tape Armour) Outer Seal

E1W Armoured - S.W.A Inner/ Outer Seal

E2W Armoured - S.W.A -L.C. (Lead Sheathed) Inner/Outer Seal

E1X/Z Armoured - Braided or S.T.A (Tape Armour) Inner/Outer Seal

CWAL Armoured - A.W.A Outer Seal

Hazardous Area

Introduction to CMP Hazardous Area Cable Glands

A2F Unarmoured Outer Seal

SS2K Sureseal 2000 Unarmoured

A2FRC Unarmoured - Conduit Connection Outer Seal

V-TEC (A2Pe)- Hazardous Area

A4e Armoured - S.T.A (Tape Armour)

C2K Armoured - Multiple Armour Outer Seal

CWe Armoured - S.W.A Outer Seal

Cxe Armoured - Braided or S.T.A (Tape Armour) Outer Seal

TRITON (T3CDS) - Multiple Armour Inner/Outer Seal

E1FW Armoured - S.W.A Inner/ Outer SealE2FW Armoured - S.W.A - L.C. (Lead Sheathed) Inner/ Outer Seal

E1FX/Z Armoured - Braided or S.T.A (Tape Armour) Inner/Outer Seal

E2FX/Z Armoured - Braided or S.T.A (Tape Armour) Lead Sheathed Inner/Outer Seal

PX2K PROTEX 2000 - Armoured - Braided, S.W.A or S.T.A Outer Seal/Comp Barrier

Protex WR Armoured - S.W.A Outer Seal/Comp Barrier

Protex X/ZR Armoured - Braided Outer Seal/Comp Barrier

Protex SS2K Protex Sureseal 2000 Unarmoured Outer Seal/Comp Barrier

North America Specification Cable Connectors

Introduction to CMP North American Glands

PXSS2K Unarmoured Cable

C2KX Armoured & Jacketed - Wet Locations Outer Seal

PXB2KX Armoured CablePX2KX Armoured & Jacketed - Class 1 Div 1 Compound Barrier/ Outer Seal

MCRA

MCXA

Cable Gland Options & Accessories

Cable Gland Options

Accessories And Tools

Standard Selection Table For Adaptors & Reducers

Stopper Plugs & Insulated Adaptors

Cable Selector Charts

XLPE / EPR / SWA / PVC Cables BS5467

PVC / SWA / PVC Cables BS6346Unarmoured XLPE / PVC Cable To BS6883:9X (DRAFT)

3

4

5

6 - 7

8

9

10

11

12

13

14

15

16

17

18

19

20

2122

23

24

25

26

27

28

29

30

31

32

3334

35

36

37

38

39

40

41

42

43

4445

46

47

48 - 49

50 - 51

52 - 53

54 - 55

56

5758 - 59


5/64

3



CableNPT or NPS M P.G. PF / BSP(JIS) Imperial

Gland ISO Metric(E.T.)

Size Preferred Option Preferred Option Preferred Option

16 M16 1/2” 3/4” 11 9, 13.5 - - -

20/16 M20 1/2” 3/4” 11 9, 13.5 1/2” - 3/4”

20S M20 1/2” 3/4” 13.5 11, 16 1/2” - 3/4”

20 M20 1/2” 3/4” 16 11, 13.5, 21 1/2” 3/4” 3/4”25 M25 3/4” 1” 21 - 3/4” 1” 1”

32 M32 1” 1-1/4” 29 - 1” 1-1/4” 1-1/4”

40 M40 1-1/4” 1-1/2” 36 29 1-1/4” 1-1.2” 1-1/2”

50S M50 1-1/2” 2” 36 42 1-1/2” - 2”

50 M50 2” 2-1/2” 42 48 2” - 2”

63S M63 2” 2-1/2” 48 - 2” - 2-1/2”

63 M63 2-1/2” 3” - - 2-1/2” - 2-1/2”

75S M75 2-1/2” 3” - - 2-1/2” - 3”

75 M75 3” 3-1/2” - - 3” 3-1/2” 3”

90 M90 3” 3-1/2” - - 3” 3-1/2” 3-1/2”

ENTRY THREAD OPTIONS

GLAND SELECTION GUIDELINES

The following is an extract from BS6121:Part 1, with edited additions to assist in gland selection :-

• Select the type of cable and identify a corresponding cable gland type from this catalogue.

• Check the type, size & voltage rating of the cable. Note for cables of 3.3kV & above the CMP-CIEL Gland is recommended.

• Check ACTUAL size of cable over the inner sheath / lead sheath against this catalogue.

• Check ACTUAL size of overall cable diameter against this catalogue.

• Check the size and type of armour or braiding, if any, against this catalogue.

• Check any special environment conditions including enclosure material in relation to corrosion.

• Check whether installation is in Hazardous Areas, & consider an environmental seal on the cable sheath for indoor/outdoor use.

• Check whether an entry thread seal is required for IP66 (or IP67/IP68) conditions.

• Check whether accessories, (ie. shrouds, slip on earth tags, locknuts etc) are required.

KEY to Hazardous Area Cable Glands = Increased Safety Type ‘e’ Dual Certified Type ‘d’ & ‘e’ Flameproof Type ‘d’■ ◆ ▲

NOTE :The table above details Standard (Preferred) and Optional Thread sizes which are available on all CMP ‘Double Seal’ Cable Gland types andSingle Seal Cable Glands for unarmoured cables (e.g.A2,A2F,A2RC,A2FRC). Please consult CMP for any requirements not covered by this table.

G L A N D S

E L E C T I O N G

U I D E L I N E S

BW

BWL

CW

Braided Unarmoured

CABLETYPECable Gland

Type SWA STASWA Lead

Sheathed

APPLICATIONSEALING CONFIGURATION

No Seal Inner SealDouble Outer

SealOuter Seal Outdoor Indoor Hazardous

●

●

● ●●

●

●●

●

●

C2KX

CWAL

E1W

E2W

CX

E1X/Z

A4

A2

SS2K GP

CWe

CXe

C2K

A4e

A2F

SS2K

E1FW

E2FW

E1FX/Z

WR

XR

PXB2KX

PX2K

PX2KXPXSS2K

●

●

●

●

●

●

●

●

●

●

●

●

● ● ● ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

● ● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

● ●● ●

● ●● ●

●

●

●

●

●

●

● ●

● ●

● ●

● ●

● ●

● ●

● ●

●

●

●

■

■

■

■

◆

● ●● ● ◆

● ●● ●

●

■

◆

● ● ◆

◆

◆

◆

▲

▲

▲

▲

▲

▲

Areas

A2RC

A2FRC

A2Pe

T3CDS

A2P


6/64



C M P D I S P L A C M E N T S E A

L C O N C E P T

As it will be seen from the detailed technical datacontained within this catalogue the method of cablesealing in the CMP range of cable glands is fundamentally

different from that of it’s competitors. CMP has pioneeredthe use of displacement type seals which afford a largedegree of control in the tightening of the seals onto thecable sheath as opposed to conventional compressionseals which usually require the cable gland to be fullytightened on installation.The information below sets outto demonstrate the difference between the different sealtypes adopted and the reasons why CMP utilise thedisplacement seal very effectively in its Cable Gland range.

It has long been recognised that the difference in reactionpressure between the inner seal of a cable gland and thepolymeric material of the cable sheath can result in‘cold flow’ under load cycling. Soft bedded cables areparticularly prone to cold flow’. The latest EuropeanStandard EN60079 requires the user to install CableGlands which do not cause an adverse ‘cold flow’ reactionto the inner cable bedding,which would otherwise breachthe integrity of the form of the hazardous area protectionof the electrical apparatus. This is a particular problemwhen using cable glands fitted with conventionalcompression seals.To overcome this problem, the CMP cable gland design

incorporates a unique seal arrangement whereby the sealis displaced as the gland is tightened, virtually eliminatingany damage to the cable sheath. Additionally the CMP

design enables the user to control the level of displacement of the seal, and this level of control is afeature not found in other traditional cable glands.Duringdevelopment, tests were carried out on soft beddedcables, comparing these ‘displacement’ seals with thetraditional, ‘compression’ type seals. Significantly lessdistortion or damage to the cable sheath of soft beddedcables occurred when displacement seals were used.Obviously in hazardous area installations, the ongoingeffectiveness of the inner seal of the cable gland representsa critical link in the chain of safety. In recognition of this,the CMP cable glands enable the effectiveness of thecritical inner seal to be easily checked on an ongoing basisin a way that no other cable gland types allow.

The CMP displacement seal concept has been proven overmany years in service and has been endorsed by majorusers globally as the preferred solution for explosionproof and industrial installations

(See also TRITON CDS - compensating DisplacementSeal System on Pg 32)

DISPLACEMENT SEALS COMPRESSION SEALS

Relaxed Compressed With Controlled Compression

Inner Outer

RELATIVE EFFECTS ON CABLE SHEATH

Note : Cable performance can be affected by Compression Type Seals employed on either the Inner Sheath or the Outer Sheath

With Displacement Seal With Compression Seal

CRUCIAL CABLE CARE - THE DISPLACEMENT SEAL CONCEPTYET ANOTHER ORIGINAL FROM CMP

4


7/64



G

U I D E T O H

A Z A R D O U S A R E A G

L A N D

S E L E C T I O N

INTERPRETATION OF HAZARDOUS AREA CODE OF PRACTICE FOR

SELECTION OF COMPOUND BARRIER TYPE CABLE GLANDS

Direct entry into

Flameproof

Type ‘d’ enclosure

Indirect entry into

Flameproof

Type ‘d’ enclosure

For cables entering FlameproofType ‘d’ enclosures indirectly,

a Compound BarrierCable Gland need not be used.

Ex ‘d’ TerminalCompartment

Conventional CableGland with Sealing

Rings (e.g. P2K)Line

Barriers

For cables entering directly intoFlameproof Type ‘d’ enclosures, a

Compound Barrier Cable Glandis sometimes required.

✝ If in doubt consult with the

cable supplier or cable manufacturer.

Compound BarrierGland (e.g. PX2K) 5

Selection process for cables directly

entering Ex ‘d’ enclosures.


8/64

Directive 99/92/EC requires employers to protect workers from the risk of explosive atmospheres. An explosive atmosphere is definedas a mixture with air, under atmospheric conditions, of dangerous substances in the form of gases, vapours,mist or dust in which afterignition has occurred, combustion spreads to the entire unburned mixture. ATEX 137 implemented in the UK as DSEAR:

Dangerous Substances and Explosive Atmosphere Regulations 2002Statutory Instrument 2002 No.2776 (Mandatory from 9th December 2002)

SurfaceIndustries

Risk Assessment

Risk Assessment

Risk assessment does not include:a) Likelyhood that an explosive

atmosphere will occur,b) Ignition source,c) Scale of explosion, andd) any places connected via

opening to the explosive atmosphere

Risk assessment does not include:a) Likelyhood that an explosive

atmosphere will occur,b) Ignition source,c) Scale of explosion, and

d) any places connected viaopening to the explosive atmosphere

Medical areasGas appliances

(domestic)Gas Fittings

Manufacture,handling,storage of explosives.

Borehole SiteMeans of transport bylandor seas (does not

include transportintended for use inhazardous)

MODEstablishment

No

Yes

Yes

No

ATEX 99/92/EC does not apply

Yes

No

Mines &Quarries

Reduce therisk fromdangerous

substances

Classification of workplaces intoHazardous/non-Hazardous Area

(mandatory1st July 2003)

Procedures onaccidents,incidents

emergencies

InformationInstruction and

Training

Procedures onaccidents,incidents

emergencies


Training

Procedures on accidents, incidentsemergencies. 8(1)(d)-(In explosive

conditions audible and visual alarmsrequired) not applicable


Training

DSEAR doesNOT apply

DSEAR doesNOT apply

Reduce therisk fromdangerous

substances

Offshore Oil &Gas platforms

Ships

Secretary of Statesissues certification

of exemption

ExemptionsGeneral Safety Measures• Workplace and Work ProcessessThe following do not apply:a) UPS backupb) manual override shutdown

buttonsc) energy to be dissipated after

operation of emergency shutdown

• Systems of Work a) need for written instructions

for carrying out the work;b) permits to work

HM Navy

Summary of the main requirement for DSEAR is given below:

• Carry out a risk assessment of any work activities involvingdangerous substances;

• Provide technical and organisational measures to eliminate or

reduce to, as far as is reasonably practical, the identified risks;• Provide equipment and procedures to deal with accidents and

emergencies;• Provide information and training to employees;

• Classify places where explosive atmospheres may occur into zones,and mark the zones where necessary.

Other than for certain maritime activities, DSEAR applies whenever the

following conditions have been satisfied:

1) There is work being carried out by an employer or self-employed person;

2) A dangerous substance is present or liable to be present at the workplace;

3) The dangerous substance presents a risk to the safety of persons

(as opposed to a risk to health).

The requirements of DSEAR concerning zoning and co-ordination of safety

measures in shared workplaces (Regulation 7 & 11 of DSEAR) do not apply to

all workplaces where other legislation is in place.

Typical Cable Gland Marking for ATEXCable Glands carrying ATEX approval will typically be marked thus:

Cable Gland MarkingExample of additional Cable Gland marking according to Form of Protection

CertificateHolder

ATEXGeneration

ApparatusGroup

Form of

Protection 1

Form of

Protection 2

ApprovedGas Group

Ex StatusG=GasD=Dust

Postcode SignifiesAddress of

ManufacturerSpecial Condition

Temperature RatingQA Notified

Body Number

‘X’ - Denotes thatSpecial ConditionsFor Safe Use Exit

Year of 1stApproval

SpecificApproval No.

EquipmentCategory

Country of Manufacture

CE Mark Signifies Full Compliancewith EN Standards

SIRA 00 ATEX 1148 X II 2 GD

EEx d IIC EEx e II Type 4X Oil Res II

NE6 1BS UK -60˚C + -130˚C 0518

Additional

Approval Mark

Oil Resistance

Rating

ApprovedGas Group

AdditionalNEMA Rating

99/92/EC


I N T R O D U C T I O N T O A T E

X

D I R E C T I V E S

6


9/64

A T E X D

I R E C T

I V E



Directive 94/9/EC (ATEX 95) Equipment and Protective Systems for use in potentially explosive atmospheres.Covers electrical andnon-electrical products intended for use in hazardous areas (gas, vapours or dust atmospheres).ATEX 95 implemented in the UK as :

The Equipment and Protective Systems Intended for USE in PotentiallyExplosive Atmosphere Regulations 1996 Statutory instrument 1996 No. 192

Zoning Definitions

94/9/EC

Zones

EN60079-10 EN50281-3

Definitions

Zone IP RatingATEX Category

BSEN 50281-1-1/2

Gas

0 20

A place in which an explosive atmosphere is likely to occur innormal operation occasionally.

Type of Protection

Intrinsic Safety

Increased Safety

Flameproof

Pressurisation

Powder Filling

Encapsulation

Oil Immersion

Type n

EEx is & ib

EEx e

EEx d

EEx p

EEx q

EEx m

EEx o

EEx n

EN 50020

EN 50019

EN 50018

EN 50016

EN 50017

EN 50028

EN 50015

EN 50021

Dusts

20

21

22

IP6X

IP6X

IP5X

Requires 1D equipment

Requires 1D or 2D equipment

Requires 3D, 2D, 1D equipment

*Must be IP6X if dust is electrically conductive

A place in which an explosive atmosphere is not likely to occurin normal operation, but if it does only occurs for short periods.

1 21

2 22

Dust

Zoning Definitions

ATEX

Cat.

Typical Zone

Suitability

1G1D

2G2D

2G2D

Equip. suitable for zones 0Equip. suitbale for zones 20



A place in which an explosive atmosphere is continuily present.

Type of Protection

CENELECCode

ENStandard

Non-electrical equipment (concepts)

EN 13463-1

EN 13463-2

EN 13463-3

EN 13463-4

EN 13463-5

EN 13463-6

EN 13463-7

EN 13463-8

Basic methods & requirements

Flow restricting enclosure

Flame-proof enclosure

Inherent safety

Constructional Safety

Control of ignition sources

Pressurisation

Liquid immersion

fr

d

g

c

b

p

k

Conformity Assessment ‘Quality Modules’

Design Phase

EC-Type Examination

Internal Control of Production

Unit Vertification

Production Phase

Production Quality Assurance

Product Quality Assurance

Product Verification

Conformity to Type

Internal Control of Production

Unit Verification

*Notes:1 “Global Approach” OJEC No. L220, 19932 ATEX Directive 94/9/EC3 Suffix (E) refers to electrical equipment and internal combustion engines

Suffix (N) refers to non-electrical equipment4 Technical Files to be deposited with a notified body

KEY= mandatory unless Unit Verification is used= optional as an alternative to other modules

Y = one of two production phase modules for the equipment category tobe chosen by the manufacturer

Module

*1

B

A

G IX

D IV

E VII

F V

C VI

A VIII

G IX

VIII

III

Y

Y

Y

Y Y Y

Y

Y

Y Y

O OOOOOO O

O OOOOOO O

O

AnnexM1 M2

(E)M2(N)

1 2(E)

2(N)

3Prodective

System

Equipment Category *3

*2

Enclosed break device CNon-incendive component CHermetically sealed device CSealed device CEncapsulated device CEnergy limited apparatus and circuits LRestricted breathing enclosure RSimplified pressurisation PNon sparking A

T1

T2

T3

T4

T5

T6

450

300

200

135

100

85

Type n equipmentcontaining:

Additionalcode letter TClass

Maxsurface

temp in˚C

*4 *4

7


10/64

I N G R E S S

P R O T E

C T I O N



DEGREE OF INGRESS PROTECTION (IP CODE) IN ACCORDANCE WITH EN 60529 : 1991

CMP cable glands comply with the requirements of EN60529:1991 (IEC 529) in respect of I.P. ratings. Some cable glandtypes have been tested to IP66, whilst other types have been tested to IP66, IP67 & IP68, to a depth of 10 metres. *

Protected against access

to hazardous parts with

the back of a hand

0 0 Non-protected

1 1Protected against

drops of water

falling vertically

2 2Protected againstdrops of water

falling at up to 15º

from the vertical

3 3

Protected against

spraying water at

up to 60º from

the vertical

4 4Protected againstsplashing water

from all directions

5 5

Protected against

jet of water from

all directions

Protected against

jet of water of

similar force to

heavy seas

Protected against

the effects of

immersion

Protected against

prolonged effects

of immersion

under pressure toa specified depth

6 6

50mm

12mm

2.5mm

1mm

Protected against solid

foreign objects of

50mm diameter

and greater

PROTECTION AGAINST SOLID FOREIGN OBJECTSAND ACCESS TO HAZARDOUS PARTS

PROTECTION AGAINSTLIQUIDS

Protected against solidforeign objects of

12.5mm diameter

and greater

Protected against solid

foreign objects of

2.5mm diameter

and greater

Protected against solidforeign objects of

1.0mm diameter

and greater

Dust-protected

Non-protected

F i r s t D

i g i t

S e c o n d D i g i t

Non-protected

Dust-tight

Protected against accessto hazardous parts with

a finger



a tool


a wire



a wire


a wire

1m

m

7

8

1 5 c m

( m i n )

* Please refer to appropriate catalogue pages for specific ratingsaccording to their design and construction.

In addition to the Ingress Protection tests carried out as standard on theCMP range of Cable Glands, selected products have additionally beentested to meet the requirements of NEMA 4X in accordance with NorthAmerican standards. Please refer to catalogue pages for specific productcompliance.

8


11/64

APPL ICAT ION

The CMP range of Industrial Cable Glands embraces products used in a

wide and diverse variety of market sectors, in conjunction with virtually

every kind of industrial cable. With a wealth of experience in terminating

all types of armoured and unarmoured cables CMP have discovered that

when it comes to such critical installations, quality really does count.

PRODUCTS

Cable Gland options for all types of cable

SPECIFICATIONS & APPROVALS

Largely based around the BS6121 & BS7394 standards CMP deliver

product produced strictly under ISO9001 controls.CMP Cable glands also conform to BSEN50262.

R A N G E

CMP PRODUCTS

© BP Amoco p.l.c. 1997




12/64



10

U N A R M O U R E D

C A B L E

A

B

C

D

A2 GLAND

Minimum Across Ordering PVC

Gland SizeStandard Entry Threads ‘B’

ThreadCable Dia ‘A’

Corners Reference Shroud

Metric NPT PG Length ‘C’ Min Max Dia ‘D’ Max (Metric) Ref.

16 16 1/2” PG11 10 3.1 8.6 24.4 16A2 PVC02

20/16 20 1/2” PG11 15 3.1 8.6 24.4 20/16A2 PVC02

20S 20 1/2” PG13.5 10 6.1 11.6 26.5 20SA2 PVC04

20 20 1/2” PG16 10 6.5 13.9 30.0 20A2 PVC05

25 25 3/4” PG21 10 11.1 19.9 39.9 25A2 PVC09

32 32 1” PG29 10 17.0 26.2 45.5 32A2 PVC10

40 40 1-1/4” PG36 15 22.0 32.1 55.4 40A2 PVC13

50S 50 1-1/2” PG36 15 29.5 38.1 61.0 50SA2 PVC14

50 50 2” PG42 15 35.6 44.0 66.5 50A2 PVC17

63S 63 2” PG48 15 40.1 49.9 77.6 63SA2 PVC20

63 63 2-1/2” - 15 47.2 55.9 83.2 63A2 PVC22

75S 75 2-1/2” - 15 52.8 61.9 88.7 75SA2 PVC24

75 75 3” - 15 59.1 67.9 94.2 75A2 PVC2690 90 3” - 15 66.6 79.3 120.7 90A2 PVC31

All Dimensions in Millimetres

A2 Industrial Cable Gland

Brass indoor and outdoor cable gland for all types of unarmoured cable

providing a seal on the outer sheath.

TECHNICAL DATA

TYPE A2

DESIGN SPECIFICATION BSEN50262

INGRESS PROTECTION IP66, I P67 & IP68 (10M DEPTH)

GLAND MATERIAL BRASS

SEAL MATERIAL CMP SOLO LSF

CABLE TYPE UNARMOURED

SEALING TECHNIQUE CMP DISPLACEMENT SEAL CONCEPT

SEALING AREA OUTER SHEATH

* SOLO Option with LSF Seals & LSF Shrouds also AvailableIntegral Entry Thread Seal Option also available, For this Option prefixgland type with ‘R’, e.g. 25RA2Also available in Brass with Nickel Plated Finish

ADDITIONAL APPROVALS

MARINE APPROVALS LLOYDS,ABS

GOST CERTIFICATE OF CONFORMITY 5318856

OPTIONAL ACCESSORIES SHROUD, LOCKNUT, SERRATED WASHER

ENTRY THREAD SEAL, ADAPTOR/REDUCER


13/64



TYPE SS2K GP (SS2KPB GP FOR LEAD

SHEATHED CABLES).


INGRESS PROTECTION IP66, IP67 & IP68 (10M DEPTH )


SEAL MATERIAL THERMOPLASTIC ELASTOMER



SEALING AREA(S) OUTER SHEATH (DOUBLE SEAL)

OPTIONAL ACCESSORIES LOCKNUT, E ARTH TAG, SERRATED WASHER

ENTRY THREAD SEAL, ADAPTOR/REDUCER

* SOLO Option with LSF Seals also AvailableIntegral Entry Thread Seal Option Available(for this option pre-fix gland type with ‘R’, e.g. 25RSS2KGP)

Standard Entry Minimum Cable Dia ‘A’ / ‘B’ Across Ordering

Gland Size Threads ‘C’ Thread Millimetres Corners Reference

Metric NPT PG Length ‘D’ Min Max Dia ‘E’ Max (Metric)

16 16 1/2” PG11 10 3.1 8.6 24.4 16SS2KGP

20/16 20 1/2” PG11 15 3.1 8.6 24.4 20/16SS2KGP

20S 20 1/2” PG13.5 10 6.1 11.6 26.5 20SSS2KGP

20 20 1/2” PG16 10 6.5 13.9 30.0 20SS2KGP

25 25 3/4” PG21 10 11.1 19.9 39.9 25SS2KGP

32 32 1” PG29 10 17.0 26.2 45.5 32SS2KGP

40 40 1-1/4” PG36 15 22.0 32.1 55.4 40SS2KGP

50S 50 1-1/2” PG36 15 29.5 38.1 61.0 50SSS2KGP

50 50 2” PG42 15 35.6 44.0 66.5 50SS2KGP

63S 63 2” PG48 15 40.1 49.9 77.6 63SSS2KGP

63 63 2-1/2” - 15 47.2 55.9 83.2 63SS2KGP

75S 75 2-1/2” - 15 52.8 61.9 88.7 75SSS2KGP

75 75 3” - 15 59.1 67.9 94.2 75SS2KGP90 90 3” - 15 66.6 79.3 120.7 90SS2KGP


A

B

C

D

E

SS2K (GP) GLANDSURESEAL 2000 GP Industrial Cable Gland

Indoor and Outdoor Brass Cable Gland for all types of Unarmored Cables,

providing an environmental seal on the cable inner and outer sheaths, or a

double seal to the cable outer sheath. Suitable for applications where superior

cable pull out resistance and stability is required.Type SS2KPB GP available for

unarmoured cables with lead sheath.

TECHNICAL DATA

U N A R M O U R E D

C A B L E

11


14/64



TECHNICAL DATA

TYPE A2RC


INGRESS PROTECTION IP66, IP67 & IP68 (10M DEPTH)


SEAL MATERIAL THERMOPLASTIC ELASTOMER



SEALING AREA (S) OUTER SHEATH

OPTIONAL ACCESSORIES LOCKNUT, E ARTH TAG, S ERRATED

WASHER ENTRY THREAD SEAL,

ADAPTOR/REDUCER

* SOLO Option with LSF Seals also Available

A2RC Industrial Cable Gland for Conduit Connection

Standard Male Entry Minimum ✝ Standard AcrossOrdering

Gland Size Connection Threads ‘B’ Thread Female NPTCable Dia ‘A’

CornersReference

Metric NPT PG Length ‘C’ Threads Min Max Dia ‘D’ Max

20/16 20 1/2” PG11 15 1/2” 3.1 8.6 30.0 20/16A2RC20S 20 1/2” PG13.5 10 1/2” 6.1 11.6 30.0 20SA2RC

20 20 1/2” PG16 10 1/2” 6.5 13.9 30.0 20A2RC

25 25 3/4” PG21 10 3/4” 11.1 19.9 39.9 25A2RC

32 32 1” PG29 10 1” 17.0 26.2 45.5 32A2RC

40 40 1-1/4” PG36 15 1-1/4” 22.0 32.1 55.4 40A2RC

50S 50 1-1/2” PG36 15 1-1/2” 29.5 38.1 61.0 50SA2RC

50 50 2” PG42 15 2” 35.6 44.0 72.1 50A2RC

63S 63 2” PG48 15 2” 40.1 49.9 77.6 63SA2RC

63 63 2-1/2” - 15 2-1/2” 47.2 55.9 88.7 63A2RC

75S 75 2-1/2” - 15 2-1/2” 52.8 61.9 88.7 75SA2RC

75 75 3” - 15 3” 59.1 67.9 105.3 75A2RC

90 90 3” - 15 3” 66.6 79.3 120.7 90A2RC


✝ Female connection threads in NPT, other thread forms manufactured to order. When ordering please confirm Male & Female Threads required.

Brass indoor and outdoor conduit connection cable gland for all types of

unarmoured cables housed in rigid or flexible conduit systems.The gland

is equipped with a rotating male or female connection for ease of conduit

installation.

12

U N A R M O U R E D C A B L E S

I N C O N D U I T

A

B

C

D

A2RC GLAND

Female Connection

Threads Illustrated


15/64



U N A R M O U R E D

C A B L E

13

V-Tec (A2P) Industrial

*Sealing range based upon strain relief & twist protection to VDE 0619 - Available colours: Black, Light Grey (RAL 7001) & Silver Grey (RAL 7035).For colour options please add the folowing suffix to the ordering codes above: B= Black. G= Light Grey. S= Silver GreyOther colours and other non-metallic products in the V-TEC range are also available, please consult CMP Products for further information.

TYPE DESIGNATION V-TEC, L & M (A2P)

CABLE GLAND MATERIAL POLYAMIDESEAL MATERIAL CMP SOLO LSF

FLAME RETARDANCY SPECIFICATION VDE 0471/IEC 695 PART 2-1

WITHSTAND TEMPERATURE TESTED +750˚C

CERTIFIED CONTINUOUS OPERATING -20˚C TO +70˚C

TEMPERATURE RANGE

INGRESS PROTECTION IP68(AT 5 BAR) TO VDE 0619 / IEC529 ETS



SEALING TECHNIQUE CONTROLLED SEAL WITH STRAIN RELIEF

OPTIONAL ACCESSORIES LOCKNUT

TECHNICAL DATA

CMP V-TEC - & L Cable Glands (A2P) - General Purpose Industrial Type

A2P1 / A2LP1 Pg 7 8.0 15.0 2.5 6.5 3.0 6.5 18.0 23.0 15.0 16.5 0.41 50

A2P2 / A2LP2 Pg 9 8.0 15.0 2.5 8.0 3.5 8.0 21.0 27.0 19.0 21.0 0.67 50

A2P3 / A2LP3 Pg 11 8.0 15.0 3.5 10.0 4.5 10.0 22.0 29.0 22.0 25.0 0.93 50

A2P4 / A2LP4 Pg 13.5 9.0 15.0 5.0 12.0 6.0 12.0 23.0 30.0 24.0 27.0 1.09 50

A2P5 / A2LP5 Pg 16 10.0 15.0 7.0 14.0 7.0 14.0 25.0 33.0 27.0 30.0 1.49 25

A2P6 / A2LP6 Pg 21 11.0 15.0 9.0 18.0 12.0 18.0 28.0 38.0 33.0 37.5 2.33 25

A2P7 / A2LP7 Pg 29 11.0 15.0 14.0 25.0 17.0 25.0 32.0 43.0 42.0 47.5 3.86 20

A2P8 / A2LP8 Pg 36 13.0 18.0 18.0 32.0 20.0 32.0 39.0 54.0 53.0 60.0 7.75 10

A2P9 / A2LP9 Pg 42 13.0 18.0 24.0 38.0 26.0 38.0 42.0 57.0 60.0 68.5 10.07 5

A2P10 / A2LP10 Pg 48 14.0 18.0 30.0 44.0 30.0 44.0 42.0 58.0 65.0 74.0 10.73 5

Size Ref.Thread

Size ‘A’

Cable Acceptance Range ‘C’

Min MaxSTD L

Across

FlatsAcross

CornersWeight

(KG/100)

Pack QTY.

Thread

Length ‘B’

Min Max

Standard Reduced*Overall Length ‘D’

Min Max

CMP V-TEC M Cable Glands (A2P) - General Purpose Industrial Type

A2MP1 M12 8.0 2.5 6.5 3.0 6.5 18.0 23.0 15.0 16.5 0.36 50

A2MP2 M16 8.0 2.5 8.0 3.5 8.0 21.0 27.0 19.0 21.0 0.63 50

A2MP3 M20 9.0 5.0 12.0 6.0 12.0 23.0 30.0 24.0 27.0 1.00 50

A2MP4 M25 11.0 9.0 18.0 12.0 18.0 28.0 38.0 33.0 37.5 2.35 25

A2MP5 M32 11.0 14.0 25.0 17.0 25.0 32.0 43.0 42.0 47.5 3.90 20

A2MP6 M40 13.0 18.0 32.0 20.0 32.0 39.0 54.0 53.0 60.0 7.50 10

A2MP7 M50 13.0 24.0 38.0 26.0 38.0 42.0 57.0 60.0 68.5 9.20 5

A2MP8 M63 14.0 30.0 44.0 30.0 44.0 42.0 58.0 65.0 74.0 9.66 5

Size Ref.Thread

Size ‘A’

Cable Acceptance Range ‘C’

Min Max

Across

FlatsAcross

Corners

Weight

(KG/100)

Pack QTY.

Thread

Length ‘B’Min Max

Standard Reduced*Overall Length ‘D’

Min Max

Plastic gland for use with unarmoured cables

V-Tec Ordering References


16/64



14

A R M O U R E D C A B L E S T A

A

B

C

D

E

A4 GLAND

Brass indoor and outdoor cable gland for all types of Steel Tape Armour

Cable providing a seal on the cable outer sheath and a continuity seal on

the Tape Armour.

TECHNICAL DATA

TYPE A4


INGRESS PROTECTION IP66



CABLE TYPE STEEL TAPE ARMOUR

ARMOUR TERMINATION METALLIC CONTINUITY SEAL



OPTIONAL ACCESSORIES SHROUD, LOCKNUT, EARTH TAG,

SERRATED WASHER, ENTRY THREAD SEAL,

ADAPTOR/REDUCER

A4 Industrial Cable Gland


Gland SizeStandard Entry Threads ‘C’

ThreadCable Dia ‘A’ Cable Dia ‘B’


Metric NPT PG Length ‘D’ Min Max Min Max Dia ‘E’ Max (Metric) Ref.

20S 20 1/2” PG13.5 10 6.5 11.6 6.1 11.6 26.5 20SA4 PVC0420 20 1/2” PG16 10 10.0 13.9 6.5 13.9 30.0 20A4 PVC05

25 25 3/4” PG21 10 11.6 19.9 11.1 19.9 39.9 25A4 PVC09

32 32 1” PG29 10 19.0 26.2 17.0 26.2 45.5 32A4 PVC10

40 40 1-1/4” PG36 15 25.0 32.1 22.0 32.1 55.4 40A4 PVC13

50S 50 1-1/2” PG36 15 27.5 38.1 29.5 38.1 61.0 50SA4 PVC15

50 50 2” PG42 15 33.1 44.0 35.6 44.0 66.5 50A4 PVC18

63S 63 2” PG48 15 40.1 49.9 40.1 49.9 77.6 63SA4 PVC21

63 63 2-1/2” - 15 47.2 55.9 47.2 55.9 83.2 63A4 PVC23

75S 75 2-1/2” - 15 43.5 61.9 52.8 61.9 88.7 75SA4 PVC24

75 75 2-1/2” - 15 49.8 67.9 59.1 67.9 94.2 75A4 PVC26

90 90 3” - 15 64.0 79.3 66.6 79.3 120.7 90A4 PVC31



17/64

A R M O U R E D C A B

L E S W A



15

BW GLAND / PACK

A

B

C

D

E

BW Industrial Cable Gland

BW Industrial Gland Kits

Brass indoor gland for use with all types of SWA cable, providing mechanicalcable retention and electrical continuity via armour wire termination.

TECHNICAL DATA

TYPE BW

DESIGN SPECIFICATION BS6121 : PART 1 : 1989

INGRESS PROTECTION IP2X


CABLE TYPE STEEL WIRE ARMOUR

ARMOUR CLAMPING TWO PART ARMOUR LOCK


SERRATED WASHER,ADAPTOR/REDUCER



* SOLO Option with LSF Shrouds also Available

Also available in Brass with Nickel Plated Finish

Gland kit for use with all types of SWA cable, including 2 Brass Glands, 2 SteelLocknuts, 2 Brass Earth Tags and 2 PVC Shrouds for sizes up to and including32mm. For sizes 40mm and above each kit includes 1 off each component

✝ For Gland Packs change the ordering code reference above accordingly. eg. 20SBWKIT

Gland SizeMetric Minimum Cable Cable Armour Across Ordering PVC

Entry Thread Dia ‘A’ Dia ‘B’ Wire Corners Reference Shroud

Thread ‘C’ Length ‘D’ Max Max Dia Dia ‘E’ Max (Gland Only) Ref.

20S 20 10 11.6 16.1 0.9/1.25 24.0 20SBW PVC02

20 20 10 13.9 21.1 0.9/1.25 30.0 20BW PVC05

25 25 10 19.9 27.4 1.25/1.6 36.0 25BW PVC07

32 32 10 26.2 34.4 1.6/2.0 44.5 32BW PVC10

40 40 15 32.1 42.4 1.6/2.0 56.3 40BW PVC13

50S 50 15 38.1 50.1 2.0/2.5 63.4 50SBW PVC16

50 50 15 44.0 55.7 2.0/2.5 72.1 50BW PVC19

63S 63 15 50.0 62.4 2.5 83.0 63SBW PVC22

63 63 15 55.9 68.2 2.5 88.7 63BW PVC24

75S 75 15 61.9 76.8 2.5 99.8 75SBW PVC27

75 75 15 67.9 82.9 2.5/3.15 105.3 75BW PVC29

Dimensions in Millimetres


18/64




L E S W A

A

B

C

D

E

BWL GLAND

16

Brass indoor gland for use with all types of SWA cable providing mechanical

cable retention and electrical continuity via armour wire termination.

BWL Heavy Duty Industrial Cable Gland

TECHNICAL DATA

TYPE BWL

DESIGN SPECIFICATION BS6121 : PART 1 : 1989

INGRESS PROTECTION IP2X

MATERIAL BRASS



OPTIONAL ACCESSORIES LOCKNUT, EARTH TAG, SHROUD,

ENTRY THREAD SEAL, SERRATED WASHER





Gland SizeMetric Minimum Cable Cable Armour Across

OrderingPVC

Entry Thread Dia ‘A’ Dia ‘B’ Wire CornersReference

Shroud

Thread ‘C’ Length ‘D’ Max Max Dia Dia ‘E’ Max Ref.

20/16 20 15 8.6 13.4 0.9 24.4 20/16BWL PVC02

20S 20 10 11.6 15.9 0.9/1.25 26.6 20SBWL PVC04

20 20 10 13.9 20.9 0.9/1.25 33.3 20BWL PVC06

25 25 10 19.9 27.4 1.25/1.6 39.9 25BWL PVC09

32 32 10 26.2 33.9 1.6/2.0 51.0 32BWL PVC11

40 40 15 32.1 40.4 1.6/2.0 56.3 40BWL PVC13

50S 50 15 38.1 46.7 2.0/2.5 66.5 50SBWL PVC17

50 50 15 44.0 53.1 2.0/2.5 77.6 50BWL PVC20

63S 63 15 50.0 62.4 2.5 83.0 63SBWL PVC22

63 63 15 55.9 68.2 2.5 88.7 63BWL PVC25

75S 75 15 61.9 72.1 2.5 99.8 75SBWL PVC28

75 75 15 67.9 78.5 2.5/3.15 111.1 75BWL PVC30

90 90 15 79.3 90.4 3.15 128.6 90BWL PVC32

Dimensions in Millimetres


19/64




L E S W A

D

A

B

C

E

CW GLAND

17

CW Industrial Cable Gland

CW Industrial Gland Kits

Brass indoor and outdoor gland for all types of SWA cable, providingenvironmental seal on the cable outer sheath.The gland also providesmechanical cable retention and electrical continuity via armour wiretermination.

TECHNICAL DATA

TYPE CW







(THREE PART OPTION AVAILABLE)





ADAPTOR/REDUCER


MARINE APPROVALS ABS



Gland kit for use with all types of SWA cable, including 2 Brass Glands, 2 SteelLocknuts, 2 Brass Earth Tags and 2 PVC Shrouds for sizes up to and including32mm. For sizes 40mm and above each kit includes 1 off each component



Thread ‘C’ Length ‘D’ Max Min Max Dia Dia ‘E’ Max (Gland Only) Ref.

20/16 20 15 8.6 6.0 13.4 0.9 24.4 20/16CW PVC02

20S 20 10 11.6 9.5 15.9 0.9/1.25 26.6 20SCW PVC04

20 20 10 13.9 12.5 20.9 0.9/1.25 33.3 20CW PVC06

25 25 10 19.9 17.0 26.2 1.25/1.6 40.5 25CW PVC09

32 32 10 26.2 22.9 33.9 1.6/2.0 51.0 32CW PVC11

40 40 15 32.1 26.0 40.4 1.6/2.0 61.0 40CW PVC15

50S 50 15 38.1 35.0 46.7 2.0/2.5 66.5 50SCW PVC18

50 50 15 44.0 38.0 53.1 2.0/2.5 77.7 50CW PVC21

63S 63 15 50.0 45.6 59.4 2.5 83.2 63SCW PVC23

63 63 15 55.9 54.6 65.9 2.5 88.7 63CW PVC25

75S 75 15 61.9 57.0 72.1 2.5 101.6 75SCW PVC28

75 75 15 67.9 60.4 78.5 2.5/3.15 111.1 75CW PVC30

90 90 15 79.3 69.2 90.4 3.15 128.6 90CW PVC32


✝ For Gland Kits change the ordering code reference above accordingly. eg. 20SCWKIT


20/64

18



B R A I D E D O R S T A C A B L E

CX/Z GLAND CX / Z Industrial Cable Gland






Brass indoor and outdoor cable gland for all types of braided or steel tape

armour (S.T.A.) cables providing environmental seal on the cable outer sheath.

The gland also provides mechanical cable retention and electrical continuity via

wire braid or steel tape armour termination.

TECHNICAL DATA

TYPE CX/Z





CABLE TYPE WIRE BRAID OR STEEL TAPE ARMOUR

ARMOUR CLAMPING THREE PART ARMOUR LOCK




ENTRY THREAD SEAL, SERRATED WASHER,

ADAPTOR/REDUCER

✝ Note : Gland size 20/16 suitable for Wire Braid Armour only.

Gland SizeMetric Minimum Cable Cable Braid/STA Across

OrderingPVC

Entry Thread Dia ‘A’ Dia ‘B’ Thickness CornersReference

Shroud

Thread ‘C’ Length ‘D’ Max Min Max Max Dia ‘E’ Max Ref.

20/16 * 20 15 8.6 6.0 13.4 0.85 24.4 20/16CX/Z PVC02

20S 20 10 11.6 9.5 15.9 0.85 26.6 20SCX/Z PVC04

20 20 10 13.9 12.5 20.9 0.9 33.3 20CX/Z PVC06

25 25 10 19.9 17.0 26.2 1.25 40.5 25CX/Z PVC09

32 32 10 26.2 22.9 33.9 1.4 51.0 32CX/Z PVC11

40 40 15 32.1 26.0 40.4 1.4 61.0 40CX/Z PVC15

50S 50 15 38.1 35.0 46.7 1.4 66.5 50SCX/Z PVC18

50 50 15 44.0 38.0 53.1 1.4 77.7 50CX/Z PVC21

63S 63 15 50.0 45.6 59.4 1.5 83.2 63SCX/Z PVC23

63 63 15 55.9 54.6 65.9 1.5 88.7 63CX/Z PVC25

75S 75 15 61.9 57.0 72.1 1.5 101.6 75SCX/Z PVC28

75 75 15 67.9 60.4 78.5 1.5 111.1 75CX/Z PVC30

90 90 15 79.3 69.2 90.4 1.6 128.6 90CX/Z PVC32


A

B

C

D

E


21/64

E1W GLAND


L E S W A



19

Brass indoor and outdoor cable gland for all types of SWA cable, providing

environmental seal on both the cable inner and outer sheaths.The gland also

provides mechanical cable retention and electrical continuity via armour wire

termination.

TECHNICAL DATA

TYPE E1W









SEALING AREA (S) INNER & OUTER SHEATH

OPTIONAL ACCESSORIES SHROUD, LOCKNUT, EARTH TAG


ADAPTOR/REDUCER

* Integral Entry Thread Seal Option Available

(for this option pre-fix gland type with ‘R’, e.g. 25RE1W)Also available in Brass with Nickel Plated finish.

Minimum Armour Across Ordering PVCGland Standard Entry Threads ‘C’


Wire Corners Reference ShroudSize

Metric NPT PG Length ‘D’ Min Max Min Max Dia Dia ‘E’ Max (Metric) Ref.

20/16 20 1/2” PG11 15 3.1 8.6 6.0 13.4 0.9 24.4 20/16E1W PVC0220S 20 1/2” PG13.5 10 6.1 11.6 9.5 15.9 0.9/1.25 26.6 20SE1W PVC04

20 20 1/2” PG16 10 6.5 13.9 12.5 20.9 0.9/1.25 33.3 20E1W PVC06

25 25 3/4” PG21 10 11.1 19.9 17.0 26.2 1.25/1.6 40.5 25E1W PVC09

32 32 1” PG29 10 17.0 26.2 22.9 33.9 1.6/2.0 51.0 32E1W PVC11

40 40 1-1/4” PG36 15 22.0 32.1 26.0 40.4 1.6/2.0 61.0 40E1W PVC15

50S 50 1-1/2” PG36 15 29.5 38.1 35.0 46.7 2.0/2.5 66.5 50SE1W PVC18

50 50 2” PG42 15 35.6 44.0 38.0 53.1 2.0/2.5 77.7 50E1W PVC21

63S 63 2” PG48 15 40.1 49.9 45.6 59.4 2.5 83.2 63SE1W PVC23

63 63 2-1/2” - 15 47.2 55.9 54.6 65.9 2.5 88.7 63E1W PVC25

75S 75 2-1/2” - 15 52.8 61.9 57.0 72.1 2.5 101.6 75SE1W PVC28

75 75 3” - 15 59.1 67.9 60.4 78.5 2.5/3.15 111.1 75E1W PVC30

90 90 3” - 15 66.6 79.3 69.2 90.4 3.15 128.6 90E1W PVC32


E1W Industrial Cable Gland



GOST CERTIFICATE OF CONFORMITY 5318856 REIW version colour coded with red

ferrule for ease of identification

A

B

C

D

E


22/64

20



L E A D C O V E R E D A R M O U R E D C A B L E S W A

RE2W version colour coded with redferrule for ease of identification

E2W GLAND

Brass indoor and outdoor cable gland for all types of Lead Covered SWA

cable providing environmental seal on both the cable inner and outer sheaths.

The gland also provides mechanical cable retention, and electrical continuity

via armour wire termination and earth bonding of Lead Sheath.

TECHNICAL DATA

TYPE E2W





CABLE TYPE LEAD COVERED STEEL WIRE ARMOUR







ADAPTOR/REDUCER

* Integral Entry Thread Seal Option Available(for this option pre-fix gland type with ‘R’, e.g. 25RE2W)

Minimum Armour Across Ordering PVCGland Standard Entry Threads ‘C’


Wire Corners Reference ShroudSize

Metric NPT PG Length ‘D’ Min Max Min Max Dia Dia ‘E’ Max (Metric) Ref.

20S 20 1/2” PG13.5 10 6.1 11.6 9.5 15.9 0.9/1.25 26.6 20SE2W PVC0420 20 1/2” PG16 10 6.5 13.9 12.5 20.9 0.9/1.25 33.3 20E2W PVC06

25 25 3/4” PG21 10 11.1 19.9 17.0 26.2 1.25/1.6 40.5 25E2W PVC09

32 32 1” PG29 10 17.0 26.2 22.9 33.9 1.6/2.0 51.0 32E2W PVC11

40 40 1-1/4” PG36 15 22.0 32.1 26.0 40.4 1.6/2.0 61.0 40E2W PVC15

50S 50 1-1/2” PG36 15 29.5 38.1 35.0 46.7 2.0/2.5 66.5 50SE2W PVC18

50 50 2” PG42 15 35.6 44.0 38.0 53.1 2.0/2.5 77.7 50E2W PVC21

63S 63 2” PG48 15 40.1 49.9 45.6 59.4 2.5 83.2 63SE2W PVC23

63 63 2-1/2” - 15 47.2 55.9 54.6 65.9 2.5 88.7 63E2W PVC25

75S 75 2-1/2” - 15 52.8 61.9 57.0 72.1 2.5 101.6 75SE2W PVC28

75 75 3” - 15 59.1 67.9 60.4 78.5 2.5/3.15 111.1 75E2W PVC30

90 90 3” - 15 66.6 79.3 69.2 90.4 3.15 128.6 90E2W PVC32


E2W Industrial Cable Gland




A

B

C

D

E


23/64

B R A I D E D O R S T A

C A B L E



21

RE1X/Z version colour coded with redferrule for ease of identification

E1X/Z GLAND

Brass indoor and outdoor cable gland for all types of braided or steel tape

armour (S.T.A.) cables, providing environmental seal on both the cable inner

and outer sheaths.The gland also provides mechanical cable retention and

electrical continuity via wire braid or tape armour termination.

TECHNICAL DATA

TYPE E1X / Z





CABLE TYPE WIRE BRAID OR STEEL TAPE ARMOUR






ADAPTOR/REDUCER

Minimum Braid Across Ordering PVCGland Standard Entry Threads ‘C’


Thickness Corners Reference ShroudSize

Metric NPT PG Length ‘D’ Min Max Min Max Max Dia ‘E’ Max (Metric) Ref.

✝ 20/16 20 1/2” PG11 15 3.1 8.6 6.0 13.4 0.85 24.4 20/16E1X/Z PVC0220S 20 1/2” PG13.5 10 6.1 11.6 9.5 15.9 0.85 26.6 20SE1X/Z PVC04

20 20 1/2” PG16 10 6.5 13.9 12.5 20.9 0.9 33.3 20E1X/Z PVC06

25 25 3/4” PG21 10 11.1 19.9 17.0 26.2 1.25 40.5 25E1X/Z PVC09

32 32 1” PG29 10 17.0 26.2 22.9 33.9 1.4 51.0 32E1X/Z PVC11

40 40 1-1/4” PG36 15 22.0 32.1 26.0 40.4 1.4 61.0 40E1X/Z PVC15

50S 50 1-1/2” PG36 15 29.5 38.1 35.0 46.7 1.4 66.5 50SE1X/Z PVC18

50 50 2” PG42 15 35.6 44.0 38.0 53.1 1.4 77.7 50E1X/Z PVC21

63S 63 2” PG48 15 40.1 49.9 45.6 59.4 1.5 83.2 63SE1X/Z PVC23

63 63 2-1/2” - 15 47.2 55.9 54.6 65.9 1.5 88.7 63E1X/Z PVC25

75S 75 2-1/2” - 15 52.8 61.9 57.0 72.1 1.5 101.6 75SE1X/Z PVC28

75 75 3” - 15 59.1 67.9 60.4 78.5 1.5 111.1 75E1X/Z PVC30

90 90 3” - 15 66.6 79.3 69.2 90.4 1.6 128.6 90E1X/Z PVC32


* Integral Entry Thread Seal Option Available

(for this option pre-fix gland type with ‘R’, e.g. 25RE1X/Z)Also available in Brass with Nickel Plated finish & Aluminium

✝ Note size 20/16 suitable for braid armour only.

E1X / Z Industrial Cable Gland




D

A

B

C

E


24/64

22




L E A W A

D

A

B

C

E

CW AL GLAND

Aluminium indoor and outdoor cable gland for all types of AWA cable,

providing environmental seal on the cable outer sheath.The gland also

provides mechanical cable retention and electrical continuity via armour

wire termination.

TECHNICAL DATA

TYPE CW ALUMINIUM



GLAND MATERIAL ALUMINIUM


CABLE TYPE ALUMINIUM WIRE ARMOUR






ADAPTOR/REDUCER



Thread ‘C’ Length ‘D’ Max Min Max Dia Dia ‘E’ Max (Gland Only) Ref.

20S 20 10 11.6 9.5 15.9 0.9/1.25 26.6 20SCW AL PVC04

20 20 10 13.9 12.5 20.9 0.9/1.25 33.3 20CW AL PVC06

25 25 10 19.9 17.0 26.2 1.25/1.6 40.5 25CW AL PVC09

32 32 10 26.2 22.9 33.9 1.6/2.0 51.0 32CW AL PVC11

40 40 15 32.1 26.0 40.4 1.6/2.0 61.0 40CW AL PVC15

50S 50 15 38.1 35.0 46.7 2.0/2.5 66.5 50SCW AL PVC18

50 50 15 44.0 38.0 53.1 2.0/2.5 78.6 50CW AL PVC21

63S 63 15 50.0 45.6 59.4 2.5 83.2 63SCW AL PVC23

63 63 15 55.9 54.6 65.9 2.5 89.0 63CW AL PVC25

75S 75 15 61.9 57.0 72.1 2.5 101.6 75SCW AL PVC28


CW Aluminium Industrial Cable Gland




25/64

APPL ICAT ION

The CMP range of Hazardous Area Cable Glands offers the user solutions which are highly cost effective in their design, and installation process. The

CMP philosophy of delivering client and end user specific requirements can beseen from a number of significant developments in this range. Given the level

of experience gained in this field CMP are able to provide a high degree of technical support and advice on the use of cable Glands in Hazardous Area

applications

PRODUCTS

Cable Gland options for all types of cable.

SPECIFICATIONS & APPROVALS

Derived from the BS6121 standard which was the original ‘flameproof’standard for Cable Glands CMP Hazardous Area Cable Glands comply with

a number of international standards including CENELEC (EN50014 & EN60079), IEC (IEC 79) UL & CSA.

CMP PRODUCTS

RANGE FOR IEC TYPE CABLES

‘© BP Amoco p.l.c. 1997




26/64

24



Dual Certified Flameproof (Type 'd') and Increased Safety (Type 'e') indoor and

outdoor cable gland for use in Zone 1,Zone 2, Zone 21 and Zone 22 Hazardous

Areas with all types of unarmoured cable, providing a Flameproof seal on the cable

outer sheath.

TECHNICAL DATA

TYPE A2F

CENELEC (ATEX) CERTIFICATION SIRA02ATEX1057X

CODE OF PROTECTION CATEGORY ATEX II 2 GD EEx d IIC & EEx e II,

EQUIPMENT ZONE 1,ZONE 2, ZONE 21, &

ZONE 22 - GAS GROUPS IIA, IIB, IIC

COMPLIANCE STANDARDS EN50014,EN50018,EN50019,EN50281-1-1

CONTINUOUS OPERATING TEMP.RANGE -60°C TO +130°C


DELUGE PROTECTION TO DTS 01:1991


SEAL MATERIAL CMP SOLO LSFCABLE TYPE UNARMOURED


SEALING AREA(S) OUTER SHEATH


ENTRY THREAD SEAL, SERRATED WASHER,

ADAPTOR/REDUCER


Gland SizeStandard Entry Threads ‘B’

ThreadCable Dia ‘A’


Metric NPT PG Length ‘C’ Min Max Dia ‘D’ Max (Metric) Ref.

16 16 1/2” PG11 15 3.1 8.6 24.4 16A2F PVC0120/16 20 1/2” PG11 15 3.1 8.6 24.4 20/16A2F PVC01

20S 20 1/2” PG13.5 15 6.1 11.6 26.5 20SA2F PVC03

20 20 1/2” PG16 15 6.5 13.9 30.0 20A2F PVC05

25 25 3/4” PG21 15 11.1 19.9 39.9 25A2F PVC08

32 32 1” PG29 15 17.0 26.2 45.5 32A2F PVC10

40 40 1-1/4” PG36 15 22.0 32.1 55.4 40A2F PVC12

50S 50 1-1/2” PG36 15 29.5 38.1 61.0 50SA2F PVC14

50 50 2” PG42 15 35.6 44.0 66.5 50A2F PVC17

63S 63 2” PG48 15 40.1 49.9 77.6 63SA2F PVC20

63 63 2-1/2” - 15 47.2 55.9 83.2 63A2F PVC22

75S 75 2-1/2” - 15 52.8 61.9 88.7 75SA2F PVC24

75 75 3” - 15 59.1 67.9 94.2 75A2F PVC26

90 90 3” - 15 66.6 79.3 120.7 90A2F PVC31


A

B

C

D

A2F Flameproof EEx d & Increased Safety EEx e Cable Gland A2F GLAND


MARINE APPROVALS LLOYDS, DNV,ABS

CSA APPROVAL 1211841

CEPEL/INMENRD APPROVAL EX-023

SAQAS APPROVAL AUS EX764

GOST APPROVAL 2002 . C256

* Integral Entry Thread Seal Option Available(for this option pre-fix gland type with ‘R’, e.g. 25RA2F)Also available in Brass with Nickel Plated finish, Stainless Steel & Aluminium

U N A R M O U R E D

C A B L E


27/64



25

U N A R M O U R E D

C A B L E

Sureseal 2000 (SS2K) EEx ‘d’ & EEx ‘e’ Cable Gland SS2K GLAND

Flameproof (Type ‘d’) and Increased Safety (Type ‘e’) Brass Cable Gland for all

types of Unarmored Cables.This Cable Gland provides an explosion proof seal on

the cable inner or outer sheath and a secondary environmental seal on the cable

outer sheath. Suitable for use in Zone 1 and 2 Hazardous Areas, this Cable Gland

design affords extra stability and superior resistance to cable pull out.Type SS2KPBavailable for unarmoured cables with lead sheath.

TECHNICAL DATA

A

B

C

D

E

TYPE SS2K (SS2KPB FOR LEAD SHEATHED CABLES)

CERTIFICATION DETAIL SIRA 02ATEX1057X


Equipment Zone 1, Zone 2, Zone 21,

& Zone 22 - Gas Groups IIA, IIB, IIC

COMPLIANCE CODE EN50014:1997, EN50018:2000,

EN50019:2000, EN50281-1-1:1998

TEMPERATURE RATING

(CONT. OPERATION) -60°C TO +130°C

INGRESS PROTECTION IP66, IP67 & IP68 (DEPTH OF 10M)



SEAL MATERIAL LSF THERMOPLASTIC ELASTOMER



SEALING AREA(S) OUTER SHEATH (DOUBLE SEAL)

OPTIONAL ACCESSORIES LOCKNUT,EARTH TAG, SERRATED

WASHER, ENTRY THREAD SEAL,

ADAPTOR/REDUCER

Integral Entry Thread Seal Option Available (for this option pre-fix glandtype with ‘R’ e.g. 25RSS2K).

Standard Entry Minimum Cable Dia ‘A’ / ‘B’ Across OrderingGland Threads ‘C’ Thread Millimetres Corners ReferenceSize

Metric NPT PG Length ‘D’ Min Max Dia ‘E’ Max (Metric)

16 16 1/2” PG11 15 3.1 8.6 24.4 16SS2K20/16 20 1/2” PG11 15 3.1 8.6 24.4 20/16SS2K

20S 20 1/2” PG13.5 15 6.1 11.6 26.5 20SSS2K

20 20 1/2” PG16 15 6.5 13.9 30.0 20SS2K

25 25 3/4” PG21 15 11.1 19.9 39.9 25SS2K

32 32 1” PG29 15 17.0 26.2 45.5 32SS2K

40 40 1-1/4” PG36 15 22.0 32.1 55.4 40SS2K

50S 50 1-1/2” PG36 15 29.5 38.1 61.0 50SSS2K

50 50 2” PG42 15 35.6 44.0 66.5 50SS2K

63S 63 2” PG48 15 40.1 49.9 77.6 63SSS2K

63 63 2-1/2” - 15 47.2 55.9 83.2 63SS2K

75S 75 2-1/2” - 15 52.8 61.9 88.7 75SSS2K

75 75 3” - 15 59.1 67.9 94.2 75SS2K90 90 3” - 15 66.6 79.3 120.7 90SS2K



28/64


U N A R M O U R E D C A B L E

( C O N D U I T )


Minimum ✝ Standard AcrossOrderingGland Standard Entry Threads ‘B’

Thread FemaleCable Dia ‘A’

CornersReferenceSize

Metric NPT PG Length ‘C’ NPT Threads Min Max Dia ‘D’ Max

20/16 20 1/2” PG11 15 1/2” 3.1 8.6 30.0 20/16A2FRC20S 20 1/2” PG13.5 15 1/2” 6.1 11.6 30.0 20SA2FRC

20 20 1/2” PG16 15 1/2” 6.5 13.9 30.0 20A2FRC

25 25 3/4” PG21 15 3/4” 11.1 19.9 39.9 25A2FRC

32 32 1” PG29 15 1” 17.0 26.2 45.5 32A2FRC

40 40 1-1/4” PG36 15 1-1/4” 22.0 32.1 55.4 40A2FRC

50S 50 1-1/2” PG36 15 1-1/2” 29.5 38.1 61.0 50SA2FRC

50 50 2” PG42 15 2” 35.6 44.0 72.1 50A2FRC

63S 63 2” PG48 15 2” 40.1 49.9 77.6 63SA2FRC

63 63 2-1/2” - 15 2-1/2” 47.2 55.9 88.7 63A2FRC

75S 75 2-1/2” - 15 2-1/2” 52.8 61.9 88.7 75SA2FRC

75 75 3” - 15 3” 59.1 67.9 105.3 75A2FRC

90 90 3” - 15 3” 66.6 79.3 120.7 90A2FRC


✝ Female connection threads in NPT, other thread forms manufactured to order. When ordering please confirm Male & Female Threads required.

A

B

C

D

A2FRC GLAND

3426

A2FRC Flameproof EEx d & Increased Safety EEx e Cable Gland

Also available in Brass with Nickel Plated finish

Dual Certified Flameproof (Type 'd') and Increased Safety (Type 'e') indoor and

outdoor cable gland for use in Zone 1,Zone 2, Zone 21 and Zone 22 Hazardous

Areas with all types unarmoured cable housed in rigid or flexible conduit system.

The cable gland provides a Flameproof Seal on the cable outer sheath and is

equipped with a rotating female connection for ease of conduit installation.

TECHNICAL DATA

TYPE A2FRC

DETAIL SIRA02ATEX1057X


EQUIPMENT ZONE 1,ZONE 2, ZONE 21,

& ZONE 22 - GAS GROUPS IIA, IIB, IIC

COMPLIANCE S TANDARDS EN50014, EN50018, EN50019, EN50281-1-1

CONTINUOUS OPERATING TEMP RANGE -60ºC TO +130ºC






SEALING AREA(S) OUTER SHEATH

OPTIONAL ACCESSORIES LOCKNUT, EARTH TAG, SERRATED WASHER

ENTRY THREAD SEAL,ADAPTOR/REDUCER





29/64



V-Tec (A2Pe) For Hazazrdous Locations

CMP V-TEC EX M Cable Glands (A2Pe) - Code of protection EEx e II

*Sealing range based upon strain relief & twist protection to VDE 0619 - Available colours: Black, Light Grey (RAL 7001) & Silver Grey (RAL 7035).For colour options please add the folowing suffix to the ordering codes above:B= Black. G= Light Grey. S= Silver GreyOther colours and other non-metallic products in the V-TEC range are also available, please consult CMP Products for further information.

A2XPI / A2XLP1 PG 7 8.0 15.0 3.5 6.5 18.0 23.0 15.0 16.5 0.41 50

A2XP2 / A2XLP2 PG 9 8.0 15.0 5.0 8.0 21.0 27.0 19.0 21.0 0.67 50

A2XP3 / A2XLP3 PG 11 8.0 15.0 4.5 10.0 22.0 29.0 22.0 25.0 0.93 50

A2XP4 / A2XLP4 PG 13.5 9.0 15.0 6.5 12.0 22.0 30.0 24.0 27.0 1.09 50

A2XP5 / A2XLP5 PG 16 10.0 15.0 7.0 14.0 25.0 33.0 27.0 30.0 1.49 25

A2XP6 / A2XLP6 PG 21 11.0 15.0 12.0 18.0 28.0 38.0 33.0 37.5 2.33 25

A2XP7 / A2XLP7 PG 29 11.0 15.0 17.0 25.0 32.0 43.0 42.0 47.5 3.86 20

A2XP9 / A2XLP9 PG 42 13.0 18.0 24.0 38.0 42.0 57.0 60.0 68.5 10.07 5

A2XP10 / A2XLP10 PG 48 14.0 18.0 30.0 44.0 42.0 58.0 65.0 74.0 10.73 5

CMP V-TEC EX & EX L Cable Glands (A2Pe) - Code of protection EEx e II

Size Ref.ThreadSize ‘A’

Thread Length ‘B’

EX EX L

Cable AcceptanceRange ‘C’

Min Max

Overall Length ‘D’

Min Max

AcrossFlats

AcrossCorners

Weight(KG/100)

Pack QTY.

A2XMP1 M12 8.0 3.5 6.5 18.0 23.0 15.0 16.5 0.36 50

A2XMP2 M16 8.0 5.0 8.0 21.0 27.0 19.0 21.0 0.63 50

A2XMP3 M20 9.0 7.0 12.0 23.0 30.0 24.0 27.0 1.00 50

A2XMP4 M25 11.0 12.0 18.0 28.0 38.0 33.0 37.5 2.35 25

A2XMP5 M32 11.0 17.0 25.0 32.0 43.0 42.0 47.5 3.90 20

Size Ref.ThreadSize ‘A’

Cable AcceptanceRange ‘C’

Min Max

Overall Length ‘D’AcrossFlats

AcrossCorners

Weight(KG/100)

Pack QTY.

ThreadLength ‘B’

Min Max

TYPE DESIGNATION V-TEC, EX L & EX M (A2PE)

CLASSIFICATION,HAZARDOUS AREA II 2G EEX E II

COMPLIANCE CODE EN50014 & EN50019

CENELEC CERTIFICATION PTB 99 ATEX 3112X & ATEX 3113X

UL LISTING EI70293

CABLE GLAND MATERIAL PA POLYAMIDE, (COLOUR BLACK)


FLAME RETARDANCY SPECIFICATION VDE 0471/IEC 695 PART 2-1

WITHSTAND TEMPERATURE TESTED +750˚C

CONTINUOUS OPERATING -20˚C TO +70˚CTEMPERATURE RANGE

INGRESS PROTECTION IP68(AT 5 BAR) TO VDE 0619 / IEC529



SEALING TECHNIQUE CONTROLLED SEAL WITH STRAIN RELIEF

OPTIONAL ACCESSORIES LOCKNUT, ADAPTOR / REDUCER

TECHNICAL DATA

Plastic gland for use with unarmoured cables.

U N A R M O U R E D C A B L E S

27


30/64

A4e Increased Safety EEx e Cable Gland




L E S T A

28

TYPE A4e

CERTIFICATION DETAIL SIRA02ATEX1057X

CODE OF PROTECTION CATEGORY ATEX II 2 GD EEx e II, Equipment

Zone 1, Zone 2, Zone 21,& Zone 22 - Gas

Groups IIA, IIB, IIC

COMPLIANCE CODE EN50014:1997, EN50019:2000,

EN50281-1-1:1998

CONTINUOUS OPERATING

TEMPERATURE RANGE -60°C TO +130°C



SEAL MATERIAL LSF THERMOPLASTIC ELASTOMER

CABLE TYPE STEEL TAPE ARMOUR

ARMOUR TERMINATION LEAD CONTINUITY SEAL





ADAPTOR/REDUCER

* SOLO Option with LSF Shrouds also Available.

A

B

C

D

E

A4e GLAND

Brass indoor and outdoor cable gland for use in Zone 1 and Zone 2 Hazardous Areas

with all types of steel tape armour cable, providing a seal on the cable outer sheath,

and an electrical earth continuity seal on the Tape Armour.

TECHNICAL DATA


Gland SizeStandard Entry Threads ‘C’



Metric NPT PG Length ‘D’ Min Max Min Max Dia ‘E’ Max (Metric) Ref.

20S 20 1/2” PG13.5 15 6.5 11.6 6.1 11.6 26.5 20SA4e PVC0420 20 1/2” PG16 15 10.0 13.9 6.5 13.9 30.0 20A4e PVC05

25 25 3/4” PG21 15 11.6 19.9 11.1 19.9 39.9 25A4e PVC09

32 32 1” PG29 15 19.0 26.2 17.0 26.2 45.5 32A4e PVC10

40 40 1-1/4” PG36 15 25.0 32.1 22.0 32.1 55.4 40A4e PVC13

50S 50 1-1/2” PG36 15 27.5 38.1 29.5 38.1 61.0 50SA4e PVC15

50 50 2” PG42 15 33.1 44.0 35.6 44.0 66.5 50A4e PVC18

63S 63 2” PG48 15 40.1 50.0 40.1 49.9 77.6 63SA4e PVC21

63 63 2-1/2” - 15 47.2 55.9 47.2 55.9 83.2 63A4e PVC23

75S 75 2-1/2” - 15 43.5 61.9 52.8 61.9 88.7 75SA4e PVC24

75 75 3” - 15 49.8 67.9 59.1 67.9 94.2 75A4e PVC26

90 90 3” - 15 64.0 79.3 66.6 79.3 120.7 90A4e PVC31

All Dimensions are in Millimetres


31/64


3429

M U L T I P L E A R M O U

R C A B L E S


Increased Safety (Type 'e') Deluge Proof cable gland for all types of armoured cables

including Single Wire Armour (SWA), Steel Tape Armour (STA) and Braided cables.This

cable gland provides an environmental seal on the cable outer sheath and incorporates

an enclosed 'O' ring seal for deluge protection which has been independently tested to

DTS 01:1991.The gland also provides mechanical cable retention and earth continuity

via armour termination. Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22

Hazardous Areas in Increased Safety (type 'e') apparatus or EEx de equipment which

has an increased safety terminal chamber.

TECHNICAL DATA

TYPE C2K


COMPLIANCE STANDARDS EN50014,EN50019, EN50281-1-1

COMPLIANCE STANDARDS ATEX II 2 GD EEx e II, EQUIPMENT ZONE 1,ZONE 2,

ZONE 21, & ZONE 22 - GAS GROUPS IIA, IIB, IIC

CONTINUOUS OPERATING

TEMPERATURE RATING -60°C TO +130°CINGRESS PROTECTION IP66, I P67, I P68 (10M DEPTH)

DELUGE PROTECTION TO DTS 01: 1991



CABLE TYPE STEEL WIRE, STEEL TAPE OR WIRE BRAID ARMOUR

ARMOUR CLAMPING REVERSIBLE ARMOUR CONE



OPTIONAL ACCESSORIES LOCKNUT, EARTH TAG, ENTRY THREAD SEAL

SERRATED WASHER, ADAPTOR/REDUCER

✝ For IP67 & IP68 requirements the cable diameter ‘B’ (minimum value) shown above should be increased by 1.0mm to ensure compliance.

C2K Increased Safety EEx e Cable Gland


MARINE APPROVALS LLOYDS, DNV,ABS


C2K GLAND

Standard Entry Minimum Cable Dia ‘A’ ✝ Cable Dia ‘B’ Armour Range Across OrderingGland Threads ‘C’ Thread (mm) (mm) Grooved Cone Plain Cone Corners ReferenceSize

Metric NPT Length ‘D’ Max Min Max Min Max Min Max ‘E’ Max (Metric)

20/16 20 1/2” 15 8.6 6.0 13.4 0 1.0 0.9 1.0 24.4 20/16C2K20S 20 1/2” 15 11.6 9.5 15.9 0 1.0 0.9 1.25 26.6 20SC2K

20 20 1/2” 15 13.9 12.5 20.9 0 1.0 0.9 1.25 33.3 20C2K

25 25 3/4” 15 19.9 17.0 26.2 0 1.0 1.25 1.6 40.5 25C2K

32 32 1” 15 26.2 22.9 33.9 0 1.0 1.6 2.0 51.0 32C2K

40 40 1-1/4” 15 32.1 26.0 40.4 0 1.0 1.6 2.0 61.0 40C2K

50S 50 1-1/2” 15 38.1 35.0 46.7 0 1.0 2.0 2.5 66.5 50SC2K

50 50 2” 15 44.0 38.0 53.1 0 1.0 2.0 2.5 77.7 50C2K

63S 63 2” 15 50.0 45.6 59.4 0 1.0 2.5 2.5 83.2 63SC2K

63 63 2-1/2” 15 55.9 54.6 65.9 0 1.0 2.5 2.5 88.7 63C2K

75S 75 2-1/2” 15 61.9 57.0 72.1 0 1.0 2.5 2.5 101.6 75SC2K

75 75 3” 15 67.9 60.4 78.5 0 1.0 2.5 2.5 111.1 75C2K

90 90 3-1/2” 15 79.3 69.2 90.4 0 1.6 2.5 2.5 128.6 90C2K

All Dimensions are in Millimetres

D

A

B

C

E


32/64



Increased Safety (Type 'e') indoor and outdoor cable gland for use in Zone 1, Zone 2,

Zone 21 and Zone 22 Hazardous Areas with all types of SWA cable providing an

environmental seal on the cable outer sheath.The cable gland also provides mechanical

cable retention and earth continuity via armour wire termination. Suitable for use in

conjunction with Increased Safety (type 'e') apparatus or EEx de equipment which has

an increased safety terminal chamber.

TECHNICAL DATA

TYPE CWe


CODE OF PROTECTION CATEGORY ATEX II 2 GD EEx e II, EQUIPMENTZONE 1, ZONE 2, ZONE 21,& ZONE 22 -GAS GROUPS IIA, IIB, IIC

COMPLIANCE STANDARDS EN50014, EN50019, EN50281-1-1

CONTINUOUS OPERATINGTEMPERATURE RANGE -60°C TO +130°C





ARMOUR CLAMPING TWO PART ARMOUR LOCK(THREE PART OPTION AVAILABLE).



OPTIONAL ACCESSORIES SHROUD, LOCKNUT, EARTH TAG,ENTRY THREAD SEAL, SERRATED WASHERADAPTOR/REDUCER

* CMP SOLO Option with LSF Shrouds also Available.

Also available in Brass with Nickel Plated finish and Aluminium

CWe Increased Safety EEx e Cable GlandCWe GLAND




ANZEX APPROVAL ANZEX 03. 3000-0

Gland SizeMetric Minimum Cable Cable Armour Across

OrderingPVC

Entry Thread Dia ‘A’ Dia ‘B’ Wire CornersReference

Shroud

Thread ‘C’ Length ‘D’ Max Min Max Dia Dia ‘E’ Max Ref.

20/16 20 15 8.6 6.0 13.4 0.9 24.4 20/16CWe PVC02

20S 20 15 11.6 9.5 15.9 0.9/1.25 26.6 20SCWe PVC04

20 20 15 13.9 12.5 20.9 0.9/1.25 33.3 20CWe PVC06

25 25 15 19.9 17.0 26.2 1.25/1.6 40.5 25CWe PVC09

32 32 15 26.2 22.9 33.9 1.6/2.0 51.0 32CWe PVC11

40 40 15 32.1 26.0 40.4 1.6/2.0 61.0 40CWe PVC15

50S 50 15 38.1 35.0 46.7 2.0/2.5 66.5 50SCWe PVC18

50 50 15 44.0 38.0 53.1 2.0/2.5 78.6 50CWe PVC21

63S 63 15 50.0 45.6 59.4 2.5 83.2 63SCWe PVC23

63 63 15 55.9 54.6 65.9 2.5 89.0 63CWe PVC25

75S 75 15 61.9 57.0 72.1 2.5 101.6 75SCWe PVC28

75 75 15 67.9 60.4 78.5 2.5/3.15 111.1 75CWe PVC30


A R M O U R E D C A B L E S S W A

30

D

A

B

C

E


33/64


3431


B R A I D E D

O R S T A

C A B L E

CXe GLAND

Increased Safety (Type 'e') indoor and outdoor cable gland for use in Zone 1, Zone 2,

Zone 21 and Zone 22 Hazardous Areas with all types of braided cable or STA cables

providing an environmental seal on the cable outer sheath.The gland also provides

mechanical cable retention and electrical continuity via armour termination. Suitable

for use in conjunction with Increased Safety (type 'e') apparatus or EEx de equipment

which has an increased safety terminal chamber.

TECHNICAL DATA

TYPE CXe


CODE OF PROTECTION CATEGORY ATEX II 2 GD EEx e II, EQUIPMENTZONE 1, ZONE 2, ZONE 21, & ZONE 22-GAS GROUPS IIA, IIB, IIC

COMPLIANCE STANDARDS EN50014, EN50019, EN50281-1-1





CABLE TYPE WIRE BRAID OR STA ARMOUR




OPTIONAL ACCESSORIES SHROUD, LOCKNUT, EARTH TAG,ENTRY THREAD SEAL, SERRATED WASHERADAPTOR/REDUCER

* CMP SOLO Option with LSF Shrouds also Available.

Also available in Brass with Nickel Plated finish

CXe Increased Safety EEx e Cable Gland




ANZEX APPROVAL ANZEX 03. 3000-0

Gland SizeMetric Minimum Cable Cable Braid Across

OrderingPVC

Entry Thread Dia ‘A’ Dia ‘B’ Thickness CornersReference

Shroud

Thread ‘C’ Length ‘D’ Max Min Max Max Dia ‘E’ Max Ref.

20/16 20 15 8.6 6.0 13.4 0.85 24.4 20/16CXe PVC02

20S 20 15 11.6 9.5 15.9 0.85 26.6 20SCXe PVC04

20 20 15 13.9 12.5 20.9 0.9 33.3 20CXe PVC06

25 25 15 19.9 17.0 26.2 1.25 40.5 25CXe PVC09

32 32 15 26.2 22.9 33.9 1.4 51.0 32CXe PVC11

40 40 15 32.1 26.0 40.4 1.4 61.0 40CXe PVC15

50S 50 15 38.1 35.0 46.7 1.4 66.5 50SCXe PVC18

50 50 15 44.0 38.0 53.1 1.4 78.6 50CXe PVC21

63S 63 15 50.0 45.6 59.4 1.5 83.2 63SCXe PVC23

63 63 15 55.9 54.6 65.9 1.5 89.0 63CXe PVC25

75S 75 15 61.9 57.0 72.1 1.5 101.6 75SCXe PVC28

75 75 15 67.9 60.4 78.5 1.5 111.1 75CXe PVC30


A

B

C

D

E


34/64



T3CDS Cable Gland

* For IP67 & IP68 requirements the Cable Diameter ‘B’ (minimum value) shown should be increased by 1.0mm to ensure complete compliance

TRITON CDS (Compensating Displacement seal) T3CDS Flameproof EEx d andIncreased Safety EEx e brass cable gland for all types of armoured & braided cableincluding lead sheathed versions, providing a Flameproof seal on the cable inner sheathand an environmental seal on the cable outer sheath.Equipped with a unique ReversibleArmour Cone and Bi-Directional Armour Clamping Ring which can accommodate SWA,braided and STA cables. The Cable Gland provides mechanical cable retention, and

electrical continuity via armour termination. Suitable for use in Zone 1, Zone 2,Zone 21and Zone 22 Hazardous Areas.

20/16 M20 1/2” PG 11 15 3.1 8.6 6 13.4 0 1 0.9 1.25 24.4 22 74 20/16T3CDS POSPVC02

20S M20 1/2” PG13.5 15 6.1 11.6 9.5 15.9 0 1 0.9 1.25 26.6 24 70 20ST3CDS POSPVC04

20 M20 1/2” PG16 15 6.5 13.9 12.5 20.9 0 1 0.9 1.25 33.3 30.5 74 20T3CDS POSPVC06

25 M25 3/4” PG21 15 11.1 19.9 18 26.2 0 1 1.25 1.6 40.5 37.5 82 25T3CDS POSPVC09

25S M25 3/4” PG21 15 11.1 19.9 14 22 0 1 1.25 1.6 40.5 37.5 82 25ST3CDS POSPVC09

32 M32 1” PG29 15 17 26.2 22.9 33.9 0 1 1.6 2 51 46 82 32ST3CDS POSPVC11

40 M40 1-1/4” PG36 15 22 32.1 26 40.4 0 1 1.6 2 61 55 85 40T3CDS POSPVC15

50S M50 1-1/2” PG36 15 29.5 38.1 35 46.7 0 1 2 2.5 66.5 60 93 50ST3CDS POSPVC18

50 M50 2” PG42 15 35.6 44 38 53.1 0 1 2 2.5 78.6 70.1 98 50T3CDS POSPVC21

63S M63 2” PG48 15 40.1 49.9 45.6 59.4 0 1 2.5 2.5 83.2 75 100 63ST3CDS POSPVC23

63 M63 2-1/2” - 15 47.2 55.9 54.6 65.9 0 1 2.5 2.5 89 80 100 63T3CDS POSPVC25

75S M75 2-1/2” - 15 52.8 60.5 57 72.1 0 1 2.5 2.5 101.6 90 100 75ST3CDS POSPVC28

75 M75 3” - 15 59.1 67.9 60.4 78.5 0 1 2.5 2.5 111.1 100 110 75T3CDS POSPVC30

90 M90 3-1/2” - 15 66.6 79.3 69.2 90.4 0 1 2.5 2.5 127.5 115 135 90T3CDS POSPVC32

GlandSize

Min.ThreadLength

‘D’

AcrossCorners

‘E’

AcrossFlats‘F’

OrderingReference

PVCShround

Reference

InstalledLength

Protrusion‘G’

Entry Threads ‘C’

Standard Optional

Cable Dia‘A’

Cable Dia‘B’ Armour Range

Metric NPT PG Min Max Max Max MaxGrooved Cone Plain ConeMin Max

TRITON CDS (T3CDS)

Triton CDS delivers a unique concept in cable sealing techniques incorporatingthe patented Compensating Displacement Seal system, CDS

INNER FLAMEPROOF SEAL• Unique new Compensating Displacement Seal (CDS) system, compatible with all

types of cable (eliminates cable damage and cold flow)• At the critical cable sealing point the CDS system protects the cable inner sheath

from any excess force, which is transferred to and absorbed by the internalcompensator incorporated in the CDS system

• Allows the Cable Gland to be tightened face to face every time regardlessof cable diameter.

TECHNICAL DATA

TYPE DESIGNATION T3CDS (T3CDS PB FOR LEAD SHEATHED CABLES)


COMPLIANCE STANDARDS EN50014,EN50018, EN50019 & EN50281-1-1:1998


INGRESS PROTECTION IP66, I P67, I P68 & DTS 01:1991


STANDARD CABLE GLAND BRASS


CABLE TYPE S.W.A., S.T.A. & WIRE BRAID

ARMOUR CLAMPING REVERSIBLE ARMOUR CLAMPINGCONE & BI-DIRECTIONAL CLAMPING RING

SEALING TECHNIQUE CMP UNIQUE COMPENSATINGDISPLACEMENT SEAL (CDS) SYSTEM

SEALING AREA(S) INNER & OUTER SHEATH

ACCESSORIES SHROUD, LOCKNUT, EARTH TAG, SERRATEDWASHER,ADAPTOR / REDUCER,ENTRY THREAD SEAL

* Integral Entry Thread option Available (for this option pre-fixing / and type with ‘R’, e.g. RT3CDS or RT3CDSPB)

M U L T I P L E A R M O U

R C A B L E S

32



35/64


34



L E S W A

33

A

B

C

D

E

Dual Certified Flameproof (Type 'd') and Increased Safety (Type 'e') indoor and outdoor

cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all

types of SWA cable providing a Flameproof seal on the cable inner sheath and an

environmental seal on the cable outer sheath.The gland also provides mechanical cable

retention and electrical continuity via armour wire termination.

TECHNICAL DATA

TYPE E1FW

CENELEC (ATEX) CERTIFICATION DETAIL SIRA01ATEX1286X, SIRA01ATEX3287X

CODE OF PROTECTION CATEGORY ATEX II 2 GD EEx d IIC & EEx e II,EQUIPMENT ZONE 1, ZONE 2, ZONE 21, &ZONE 22 - GAS GROUPS IIA, IIB, IIC

COMPLIANCE STANDARDS EN50014, EN50018, EN50019, EN50281-1-1

CONTINUOUS OPERATING TEMP. RANGE -60°C TO +130°C




CABLE TYPE STEE

Documents

Cat-CMP Cable Gland