Upload
vukien
View
213
Download
0
Embed Size (px)
Citation preview
CAT SALES AND DRIVERS
(44) Hh
Innovators in Trim Design
MARK AYLETT
Director Sales andMarketing
DAVID HARBORNE
UK Sales Manager07774 988352
GEOFF
FARNDON
Technical SalesRepresentative07930 692814
PAUL THOMAS
Technical SalesRepresentative07852 990660
KIRSTY HILLS
Internal Sales
SARAH THAKE
Internal Sales
PAUL HAYDEN
Managing Director
JOE HIGGINS
Technical Plastics Manager
CAT Drivers
ROGER PEARSON
RUSSEL BURDEN
MARTIN CROSS
For sales enquiries, sample requests or technical information contactCAT on 01582 561500 or fax 01582 561 900
SAMPLING
(44) Hh
Innovators in Trim Design
CAT Sampling Service
To assist with your selection of products there are avariety of sampling options offered by CAT. Detailedbelow are product fobs that contain ranges ofproducts, and point of sale display boards that depictpopular CAT products and special finishes.
CAT also offer a sampling service for all productsshown in the Comprehensive CAT. To request asample of any CAT product please contact the salesoffice on 01582 561500 and your sample will beswitfly despatched.
AluminiumFeline BoardIdeal forpromoting theCAT aluminiumrange ofproducts. Thedisplay boardcontains all ofCAT’s finishes onaluminiumproductsincluding silveranodised, satinfinish, polishedand mill.
Chrome FelineBoardThe display boardcontains all ofCAT’s specialfinishes, includedon the display arechrome, nisheen,antique brass andbronze samples,stainless steel,bright andbrushed finishes.
Sample FobsCAT also offer a range of sample fobs. Contact the sales office on 01582 561500 to request yours
For sample requests contact the sales office on 01582 561500
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
KLIKS BoardDisplaying therange of KLIKSproducts availableincluding theramp, twin andend stop. All thespecial finishesthat KLIKS isavailable in is alsodisplayed.
Cover Plate Fob Catwalk Fob Brass Nosing Fob Ramp Fob
Rod End Fob KLIKS Fob Aluminium Nosing Fob
BRANDSKLIKS 2.19 - 2.23
FELINE 2.0 - 2.3
TIMBERLINE 2.15
CATWALK 2.18
TIGER EYES 3.0 - 3.2
AKEMAN COLLECTION 6.0-6.6
TITAN 2.10
TOB SYSTEM 2.24 - 2.25
TAG TRIM 2.13
VERTEX 4.0
MAINLINE 2.12
REFLEX 2.26
All brands, trademarks and product codes are the property of C.A.T. Ltd
IMPORTANT QUALITY STATEMENTThis statement is made in good faith following interest expressed from customers in our products. C.A.T.’s
Profiles are regarded as the highest quality available and this is achieved through our monitoredmanufacturing process that we employ. Our extruded non-ferrous brass and aluminium products are
always subject to a faint slubbing effect along the length of the profile and this is inherent in the materialdue to the extrusion process and is a characteristic of the metal. Since 1986 our principle objective
remains ”to provide our customers with the very best flooring profiles and accessories available“
BRANDS
Innovators in Trim Design
(44) Hh
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
SPECIALS
Special Finishes 1.1-2Special Fabrication 1.3-4Special Products 1.5-8
FLOORING PROFILES
Bright Chrome Profiles 2.0Nisheen Profiles 2.1Twin Top Single Leg Profiles 2.2Twin Profiles 2.3Single Trims 2.4-5Special Drilling for Cover Plates 2.6Cover Plates - Brass 2.7Cover Plates - Stainless Steel 2.8Cover Plates - Aluminium 2.9Ramp Trims 2.10-11Edgings and Angles 2.12Edgings and Angles - Formable 2.13Edgings and Angles - Matwell 2.14Timberline 2.15Capping Profiles - Skirting Trims 2.16Instep Discs 2.17CatWalk 2.18Kliks 2.19-2.23Tob Clip-in System 2.24-25Reflex 2.26
LED PROFILES
Tiger Eyes 3.0Tiger Eyes Systems 3.1-2
CORNER PROFILES
Corner Protectors 4.0
STAIR NOSINGS AND EDGINGS
Stair Nosings - Technical Information 5.0-1Stair Nosings - Fabrication 5.2Stair Nosings - Infills 5.3Stair Nosings - Brass 5.4-7Stair Nosings - Aluminium 5.8-9Stair Nosings - Stainless Steel 5.10Stair Nosings - Edge Trims 5.11Typical Applications 5.12
STAIR RODS AND FIXING EYES
The Akeman Collection - Stair Rods and Fixing Eyes 6.1The Akeman Collection - Brass, Steel and Stair Clips 6.2The Akeman Collection - Fixing Eyes 6.3The Akeman Collection - Special Finishes 6.4The Akeman Collection - Pre-Packed Range 6.5The Akeman Collection - Fabrication and Special Products 6.6
PURCHASE ORDER TEMPLATES 7.1-3
LOCATION DIRECTIONS TO CAT 8.1
TERMS AND CONDITIONS IBC
With our policy of product development C.A.T. reserve the right to make productchanges in this catalogue. Please check, when ordering, of any changes toproducts required. For further information refer to CAT Termand Conditions on the inside back cover.
w
EASY PRODUCT INDEX
Innovators in Trim Design
Page
Feline T 2.3FTRS12 2.11FTS10 2.12Mainline 1 2.12Mainline 2 2.2Matwells 2.14P8 2.24P8 2.25P12 2.24P12 2.25P16 2.24P16 2.25P20 2.24P20 2.25S155 2.8S6.5 2.12S9 2.12S12 2.12S16 2.12S19 2.12S22 2.12S25 2.12SA 2.14SC30 2.8SC38 2.8SC55 2.8SC60 2.8SLE 2.11SME 2.14Special Finishes 1.1SR8 2.11SR9 2.11SR12 2.11SR14 2.11SR20 2.11SS10 2.4SSE 2.4SSEP1 2.8SSEP2 2.8SSNF 2.5Timberline 1 2.15Timberline 1/12 2.15Timberline 1/15 2.15Timberline 1/22 2.15Timberline 2 2.15Timberline 2/12 2.15Timberline 2/13B 2.15Timberline 2/15 2.15Timberline 2/22 2.15Timberline 3 2.15Timberline 3/12 2.15Timberline 3/15 2.15Timberline 4 2.15Timberline 4/128 2.15Timberline 4/1510 2.15Timberline 4/2210 2.15TOB1 2.24TOB101 2.24TOB111 2.24TOB121 2.24TOB131 2.24TOB102 2.24TOB112 2.24TOB122 2.24TOB132 2.24TOB3 2.25TOB103 2.25TOB113 2.25TOB123 2.25TOB133 2.25TOB104 2.25TOB114 2.25TOB124 2.25TOB134 2.25TOB105 2.24
(44) Hh
Flooring Profiles Page
A3 2.12A4.5 2.12A6.5 2.12A9 2.12A13 2.12A16 2.12A19 2.12A22.5 2.12A25 2.12A25HD 2.12A50 2.25A50 2.24AC38 2.9AC45 2.9AC55 2.9AC80 2.9AC82 2.9AC100 2.9AC135 2.9AEP1 2.9AEP2 2.9ANF 2.5AR8 2.10AR12 2.10AR63 2.10B155 2.7B4.5 2.12B6.5 2.12B9 2.12B13 2.12B16 2.12B19 2.12B22 2.12B25 2.12B25HD 2.12BA 2.14BC30 2.7BC38 2.7BC55 2.7BC82 2.7BEP1 2.7BEP2 2.7BLE 2.11BME 2.14BN10 2.7BNF 2.5BNR 2.5BR8 2.11BR9 2.11BR12 2.11BR14 2.11BR20 2.11BSE 2.4BSE2 2.4BTG1 2.3BTG2 2.3BTG2/SL 2.2CAP IT 2.16Cat 1 2.5Catwalk RT39/P8 2.18Catwalk T36/P8 2.18Fabrication 1.3Feline 1 2.2Feline 2 2.3Feline 3 2.2Feline 4 2.3Feline 9 2.4Feline A/10 2.2Feline A/13 2.2Feline A/9/2 2.3Feline Edge 2.4Feline S1 2.2Feline S13 2.2Feline S2 2.3Feline ST 2.3
Page
TOB115 2.24TOB125 2.24TOB135 2.24TTA4.5 2.13TTA6.5 2.13TTA9 2.13TTA13 2.13TTA16 2.13TTA19 2.13TTA22.5 2.13TTA25 2.13TTB4.5 2.13TTB6.5 2.13TTB9 2.13TTB13 2.13TTB16 2.13TTB19 2.13TTB22 2.13TTB25 2.13TTS6.5 2.13TTS9 2.13TTS12 2.13TTS16 2.13TTS19 2.13TTS22 2.13TTS25 2.13AC50/50 2.16B CAP 2.16CAP IT 2.16SC50/50 2.16S CAP 2.16SSE 2.16Drilling 2.6Instep 2.17KB1 2.19KB2 2.19KB3 2.19KB4 2.18KK102 2.21KK112 2.21KK132 2.21KK2 2.21KK222 2.21KK232 2.21KK202 2.21KK212 2.21KK101 2.19KK111 2.19KK121 2.19KK131 2.19KK103 2.22KK113 2.22KK123 2.22KK133 2.22KK3 2.22KK223 2.22KK233 2.22KK203 2.22KK213 2.22KK104 2.23KK114 2.23KK124 2.23KK134 2.23KK32 2.20Titan AR65 2.10Titan AR65/2 2.10
Wall & Corner Profiles
Vertex 1A 4.0Vertex 1S 4.0Vertex 22A 4.0Vertex 22S 4.0Vertex 2A 4.0Vertex 2S 4.0
Page
Vertex 31A 4.0Vertex 31S 4.0Vertex 3S 4.0Vertex 41A 4.0Vertex 41S 4.0
Stair Nosings & Edgings
AE32 5.8AE32/S 5.8AN1 5.8AN2 5.8AN3 5.9AN4 5.9AN5 5.9AN6 5.9AN7 5.9AN55 5.8BN1 5.7BN2 5.7BN3 5.4BN4 5.7BN5 5.4BN6 5.4BN7 5.7BN8 5.4BN11 5.7BN12 5.4BN14 5.6BN15 5.6BN16 5.5BN17 5.5BN18 5.5BN19 5.5BN20 5.6BN21 5.6BN25 5.7BN42 5.4BN52 5.4BN55 5.4BN74 5.7BN79 5.5BN90 5.7BN20/15 5.6Fabrication 5.2Nosing Infills 5.3SN60 5.10SNE 5.4Trimming Edges 5.11Technical 5.0Typical Application 5.12
Stair Rods & Eyes
Arrow & Flight 6.1Fabrication - Rods 6.6Fixing Eyes 6.3Hollow Reeded 6.1Hollow Round 6.1Large Finials 6.1Pre-Pack Range 6.5Solid Round 6.1Special Finishes 6.4Stair Clips 6.2Stair Rods 6.1Steel Rods 6.2Triangular Rods 6.2
Tiger Eyes
Tiger 1 3.2Tiger 2 3.2Tiger 3 3.2Tiger 4 3.2Tiger AU 3.2Tiger LN85 3.1LED Colours 3.0Power Supply 3.0Technical 3.0
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
(44) Hh
1.1SPECIAL FINISHES
REFER TO RELEVANT PAGES FOR AVAILABILITY OF FINISHES ON PROFILE REQUIRED
CAT specialise in special finishes tocompliment interior designs.Choose from traditional decor finishes tomodern finishes.Special finishes are available on a range ofselected flooring profiles throughout thecatalogue.
Special finishes on Brass profiles
Antique Bronze is a chemically appliedfinish to brass profiles to create an agedeffect. This is a hand-finished process andwill vary from batch to batch.
Lighter in shade than Antique Bronze,Antique Brass is chemically applied andthen relieved to give a softer effect thanpolished brass. This is a hand finishedprocess and will vary from batch to batch.
Satin Nisheen, more subtle in appearancethan Bright Chrome. Nisheen is CAT’sfinish when a duller effect is preferred.
Bright Chrome plating is applied to brassprofiles to produce a superb modern finish,Often selected as an alternative finish tostainless steel.
Please note: Finishes are not solid metalsand consideration should be given whenselection takes place to suitability ofproduct.
For a true representation of the finishes available contact CAT for a sample
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
SPECIAL FINISHES
(44) Hh
Innovators in Trim Design
1.2
Stainless Steel Finishes
For a true representation of the finishes available contact CAT for a sample
REFER TO RELEVANT PAGES FOR AVAILABILITY OF FINISHES ON PROFILE REQUIRED
Stainless Steel Bright
Stainless Steel Brushed
Aluminium Finishes
Silver Anodised
Aluminium Polished
A new exciting finish from CAT, Troy is anembossed Stainless Steel patterndeveloped for certain CAT profiles.
Aluminium Satin
Aluminium Mill
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Technical Information on Curved Profiles
A successful product installation is largelyreliant upon the accuracy of information and‘if required’ the quality of template supplied.
When placing an order for curved profiles it isimportant to provide information for allaspects of the work including floor coveringsbeing laid and the condition of the sub floor towhich profiles will be fitted. If there are twodifferent floor coverings adjoining it should bepointed out whether they are level or there isa height difference.
Profiles are formed using traditional fabricationprocesses and computer aided equipment. Thismix of knowledge and technology means we canoffer an unparalleled service for specialist trimsto the flooring trade.
It is important to note ‘the more level the subfloor and adjoining floorings the better the resultwill be’.
It is possible to form ramp trims, howeverprofiles of a flatter design lend themselves betterto fabrication.
How to Order
For profiles with a specified radiusit is possible to produce curvesfrom plans once linear meterage is confirmed by the customer, to a maximum radius of 10metres, over this dimensiontemplates are required.
For curves not of a specific radiushardboard templates should be accompanied by a sketchindicating how trims will be fitted.
Please allow 25% for material wastage in the curving press. Curves aresupplied oversize for trimming onsite.
We are here to help
For technical advice on the availability and suitability of profiles forcurving please call, fax or email your enquiry to oursales office.
To place an order please supply an official purchaseorder with templates and plans, a contact name andtelephone number. The delivery date required and
other information relevant to the project.
Our Fabrication service includes the shaping of stair nosings, stair rods,floor trims and edgings, manufacture and welding of matwells includingshaped frames, the folding and forming of bespoke profiles in aluminium,brass and stainless steel.
Innovators in Trim Design
(44) Hh
1.3FLOOR TRIMS FABRICATION
If we don’t say yes we will say “we will try it”!
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
FABRICATION
(44) Hh
Innovators in Trim Design
1.4
Product shown is Titan AR65/2 with black insert from awooden floor to ceramic tiles
SPECIAL PRODUCTS
(44) Hh
1.5
Innovators in Trim Design
On occasions a project will arise thatrequires a special product and in thissituation CAT is here to help you.With our extensive knowledge of solvingproblems CAT can offer a full range ofsolutions for your project.
Special Stainless Steel 20mm ramp,150mm long in a brushed finish
To enable us to produce a special productwe would need as much information aspossible, including quantity, finish, specialdrilling and a detailed diagram of what youwish to achieve. Information regardingfloorcoverings and how the product is tobe used will also help the design process.
SSE Brushed curved to a radius
Depending on what type of special productis required will determine ourmanufacturing process. If the productrequired is a complex aluminium sectionthen you would need to allow 10-12working weeks typically, if however yourequire a more simplistic design then aleadtime of approximately 10 days wouldbe necessary, depending on the quantityrequired. These timescales are indicativeand would be confirmed at the time ofordering.
BN1 Antique Brass Special. Cut down to35mm x 26mm
For all enquiries contact CAT on 01582 561500or Fax 01528 561900
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
SPECIAL PRODUCTS
(44) Hh
Innovators in Trim Design
1.6
PRODUCT SHOWN IS SC60BRUSHED FINISH, CURVED TO A
TEMPLATE AND CENTRE DRILLED
SPECIAL PRODUCTS
(44) Hh
1.7
Innovators in Trim Design
SPECIAL PRODUCTS TYPICAL EXAMPLES
(44) Hh
Innovators in Trim Design
1.8
The range of Special Products that CAT can produce include
Special SectionsManufactured in stainless steel, brass & aluminium to your requirements.
Curving and ShapingCurved to templates or to a radius
Laser CuttingFor ultimate intricate detail on products.
CNC CapabilitiesThis allows CAT to produce specialproducts to high standard and tolerance.
For all enquiries contact sales office on 01582 561500
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Stair Nosings withextended risersection
Special ribbedbrass sections
Special aluminiumcapped withstainless steel
150mm stainlesssteel ramp plate
Stainless steel ringsmade to 360mm dia
Special stainlesssteel slotted ramp
BRIGHT CHROME PROFILES
(44) Hh
2.0
Feline 1 Chrome
CAT Bright ChromeCAT Bright Chrome is a plated finish on aselection of our more popular profiles
Ideal for clients wishing for a superior finishto their installation.
CAT carry stock of the following profiles
Stock lengths:
Floor Trims: 2.715m x 6 = Packed 16.29m2.715m x 3 = Packed 8.14m0.900m x 6 = Packed 5.40m
Nosings: 3.5m, drilling option
BN20 Chrome
Chrome finish is available on other CATproducts, contact the sales office foravailability
For other CAT finishes refer to page 1.1-2
Feline 2 Chrome
BNF Chrome
Feline Edge Chrome
BC38 Chrome
BN21 Chrome
BN5 Chrome
50mm��
50mm��
60mm��
30mm
�
�
30mm
�
�
30mm
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
NISHEEN PROFILES
(44) Hh
Innovators in Trim Design
Feline 1 Nisheen
CAT NisheenCAT Nisheen is a unique satin chromeeffect plated on a selection of our mostpopular profiles.
Ideal for clients wishing for a superior finishto their installation.
CAT carry stock of the following profiles
2.1
Nisheen finish is available on other CATproducts, contact the sales office foravailability
For other CAT finishes refer to page 1.1-2
Feline 2 Nisheen
BNF Nisheen
Feline Edge Nisheen
BC38 Nisheen
Stock lengths:
Floor Trims: 2.715m x 6 = Packed 16.29m2.715m x 3 = Packed 8.14m0.900m x 6 = Packed 5.40m
Nosings: 3.5m, drilling option
BN20 Nisheen
BN21 Nisheen
BN5 Nisheen
50mm��
50mm��
60mm��
30mm
�
�
30mm
�
�
30mm
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
TWIN TOP SINGLE LEG PROFILES
(44) Hh
2.2
Feline™ Design © 1993Feline profiles have a high quality polishedfinish and are available with matching twinbase sections from the C.A.T. feline range.Brass feline trims are available in antiquebrass; antique bronze; nisheen or chromefinishes. Aluminium and Stainless Steel areavailable as bright or brushed. Refer to thespecial finishes page for more information.
Feline 3Brass
Feline 1Brass
BTG2/SL To special order onlyBrass
Feline A/10Aluminium
Feline A/13Aluminium
Mainline 2Aluminium
Mainline™ Design ©
Application:
Feline and Mainline edgings provideattractive finishing details from carpet totimber and ceramic floorings.
Trim heights can be adjusted with suitablepackers.
Stock lengths:
Brass and Aluminium:2.715m x 6 = Packed 16.29m0.900mm x 6 = Packed 5.40m
Stainless Steel:2.0m x 6 = Packed 12m
8.5mm�
�9mm
�
�
10.5mm
�
�
25mm��
8.5mm�
�
7mm�
�
14mm��
10mm
�
�
Feline S13 - Patent PendingStainless Steel Cover
Feline S1 - Patent PendingStainless Steel Cover
9mm�
�
12mm
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
TWIN PROFILES
(44) Hh
2.3
Feline™ Design © 1993Feline profiles have a high quality polishedfinish and are available with matching singlebase sections from the C.A.T. feline range.Brass feline trims are available in antiquebrass; antique bronze; nisheen or chromefinishes. Aluminium and Stainless Steel areavailable as bright or brushed. Refer to thespecial finishes page for more information.
Feline 4Brass
Feline 2Brass
Application:
Joining profiles for carpet and carpet tiles.T sections for ceramic tiles.
Stock lengths:
Brass and Aluminium:2.715m x 6 = Packed 16.29m0.900mm x 6 = Packed 5.40m
Stainless Steel:2.0m x 6 = Packed 12m
Feline A/9/2Aluminium
BTG1Brass
BTG2Brass
Illustration shows profile dressed down
9mm�
�8mm
�
�
8mm�
�
25mm��
BTG Designs
Feline TBrass
9mm�
�
Feline ST - Patent PendingStainless Steel Cover
8mm�
�
Feline S2 - Patent PendingStainless Steel Cover
8mm�
�
Adhesive fixing
�
Adhesive fixing
�
Innovators in Trim DesignCONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
SINGLE TRIMS
(44) Hh
2.4
Trims for Carpet/Carpet Tiles to resilientfloorings including ceramics.
BSEBrass
CAP ITAluminium
SS10Stainless Steel
Feline 9Brass
Finishes availableRefer to the special finishes page for moreinformation
Brass Trims are available in special finishesAntique brass � Antique bronze � Nisheen �Chrome
Stainless Steel Trims
Bright � Brushed
Aluminium Trims
Mill finish � Polished � Silver Anodised � Satin
Stock lengths:
Brass: 2.715m x 6 = Packed 16.29m0.900m x 6 = Packed 5.40m
Stainless Steel: 2m x 6 = Packed 12m
Aluminium: 2.715m x 6 = Packed 16.29m
BSE2Brass
Feline EdgeBrass
SSEStainless Steel
12mm
�
�
8mm
�
�
�
�
10mm
�
�
11mm
�
�
10mm
�
�
10mm
�
�
9mm
1.2mm�
�
1.2mm�
�
Smooth Top
Smooth Top
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
SINGLE TRIMS
(44) Hh
Innovators in Trim Design
2.5
Finishes available
Refer to special finishes for more information
Brass Trims are available in special finishes
Antique brass � Antique bronze � Nisheen� Chrome
Stainless Steel Trims
Bright � Brushed
Aluminium Trims
Mill finish Polished Finish
Stock lengths:
Brass: 2.715m x 6 = Packed 16.29m0.900mm x 6 = Packed 5.40m
Stainless Steel: 2m x 6 = Packed 12m
Aluminium: 2.715m x 6 = Packed 16.29m
Trims for Carpet to resilient floorings
BNRBrass
BNFBrass
ANFAluminium
SSNFStainless Steel - supplied without spikes
Trims for Carpet Tiles
Cat 1● Aluminium
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
SPECIAL DRILLING FOR COVER PLATES
(44) Hh
2.6
Centre Drilled
Stock
Offset Drilled
To special order
Stagger Drilled
To special order
CAT offer drilling options on certain productsallowing flexibility for installations
Drilling requirements must be made
clear at time of ordering.
If unspecified centre
drilled will be supplied.
If you have a requirement for special drilling please contact the sales office for lead times.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
COVER PLATES
(44) Hh
Innovators in Trim Design
2.7
Brass Finishes availableBC30, BC38, BC55Refer to special finishes pages for moreinformationAntique brass � Antique bronze � Nisheen� Chrome
BC30 Brass
BC38 Brass
BC55 Brass
can be supplied with or without bevelled edges
Extruded brass cover platesStock lengths:2.715m x 6 = Packed 16.29m0.900mm x 6 = Packed 5.40m
Supplied centre drilled for mechanicalfixings. Available undrilled and offsetdrilled upon request.
BEP plates
Formed brass platesNot available in Chrome finish or NisheenfinishB155 � BEP plates
Stock lengths:
2.0m x 6 = Packed 12m
B155
BEP ApplicationsFinishing plates for concealing expansionjointsBEP1 : 75mm wideBEP2 : 100mm wide
Wider plates can be made to special order.
Please specify drilling when ordering.
Please specify drilling for this profile
30mm��
38mm��
55mm��
82mm��
BC822.5mm
�
�
2mm�
�
2mm�
�
�
�
3.5mm
2.5mm�
�
50mm��
BN10 feature plate
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
COVER PLATES
(44) Hh
2.8
SC38
SC60
Finishes available
Please refer to the special finishes page formore informationBright � Brushed
Stock lengths:
2.0m x 6 = Packed 12m
SC30
SC55
S155
please specify drilling when orderingcan be supplied with or without bevelled edges
SSEP platesAvailable in Bright or Brushed finish
Stainless Steel Cover PlatesSupplied centre drilled for mechanicalfixings. Available undrilled and offsetdrilled upon request.
SSEP1 : 75mm wideSSEP2 : 100mm wide
Wider plates can be made to special order.
30mm��
38mm��
55mm�
�
�
�
55mm�
60mm�
2mm�
�
2mm�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
COVER PLATES
(44) Hh
Innovators in Trim Design
2.9
Wide aluminium cover platesStock lengths:2.715m x 6 = Packed 16.29m
Finish : Silver AnodisedSupplied centre drilled for mechanicalfixings. Available undrilled and offsetdrilled upon request.
AC38
AC55
can be supplied with or without bevelled edges
Extruded aluminium cover platesStock lengths:2.715m x 6 = Packed 16.29m
Supplied centre drilled for mechanicalfixings. Available undrilled and offsetdrilled upon request.
AEP formed aluminium platesTo special orderStock lengths: 2.0m x 6 = Packed 12mFinish : Mill
AC100
AEP1 : 75mm wideAEP2 : 100mm wide
AC135 135mm��
100mm� �
AC80 80mm� �
Finishes availableRefer to the special finishes page for moreinformation
Mill � Mirror � Satin � Silver Anodised
55mm�
38mm�
AC82 82mm� �
2.5mm�
�
2.5mm�
�
4.0mm�
�
4.0mm�
�
2.0mm�
�
AC45 - feature plate
● Mill Aluminium● Polished Aluminium● Satin Aluminium
45mm�
Mill and Silver Anodised
FOB
�
�
�
Innovators in Trim Design
RAMP TRIMS
(44) Hh
2.10
Finishing trims - where one type of flooring ishigher than another adjoining floor.Ceramics ● Laminate ● Carpet tiles • Barrier Mats
AR8Aluminium
Finishes availableRefer to the special finishes page for moreinformation
Aluminium Trims
Mill finish � Satin � Polished � Silver Anodised
Stock lengths:
Aluminium: 2.715m x 6 = Packed 16.29m
AR12Aluminium
12
�
�
40��
8�
�
Titan AR65/2Aluminium with PVC feature insert (supplied separately)
65��
�
�
15
AR63Aluminium
63��
16
�
�
Titan AR65Aluminium
65��
�
�
15
supplied drilled
supplied drilled
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
RAMP TRIMS
(44) Hh
Innovators in Trim Design
2.11
BR9 BrassSR9 Stainless Steel
BR14 BrassSR14 Stainless Steel
Finishing trims - where one type of flooringis higher than another adjoining floor.
Ceramics ● Laminate ● Timber
Lino Edges
BLE
BR8 BrassSR8 Stainless Steel
BR12 BrassSR12 Stainless Steel
BR20 BrassSR20 Stainless Steel
SLEStainless Steel
Finishes availableRefer to special finishes page for moreinformation.
Brass Trims available in special finishes
Antique brass � Antique bronze
Stainless Steel Trims
Bright � Brushed
Stock lengths:
Brass: 2.0m x 6 = Packed 12mStainless Steel: 2.0m x 6 = Packed 12m
(BLE 2.715m x 6 = Packed 16.29m)
20
�
�
12
�
�
8
�
�
14�
�
9
40��
40��
60��
30��
30��
FTRS12 Stainless Steel
12
�
�
30��
All sections supplied drilled. Available undrilled to special order.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
EDGINGS AND ANGLES
(44) Hh
2.12
10mm
8.5mm�
�
7mm�
�
14��
Equal Angles3
Application
Where a neat straight edge is preferredbetween floor coverings. Typicalapplications include ceramics, carpet tiles,matwell frames and vinyl floors. For curvedareas Tag Trim TT, profiles are required.Refer to page 2.13
Symbols
A – AluminiumB – BrassS – Stainless Steel
Finishes available
Refer to special finishes page for moreinformationAntique brass � Antique bronze Top edge
Angles
Polished top edges and drilled bases
Brass and Aluminium
HD = Heavy Duty
BASE BASE
UP
STA
ND
UP
STA
ND
B25 A25HDB25HD
4.7
34.7
Stock lengths: 2.5m x 6 = 15m Aluminium1.83m x 6 = 10.98m Brass
Stainless Steel
Folded Angles
Stock lengths: 2m x 6 = Packed 12m
3
2.4
Stock lengths: 2.715m x 6 = Packed 16.29m
Mainline 2
MainlineSpecialist Edging Profiles
1.5mm
S6.5S9S12S16S19S22S25
A3A4.5A6.5A9A13A16A19A22.5A25
B4.5B6.5B9B13B16B19
Stock lengths: 2.715m x 6 = Packed 16.29m
�
FTS10 - Feature Trim
�
�
Numbers denote upstand height inmillimetres. Profiles supplied with polishedtop edge.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
EDGINGS AND ANGLES — FORMABLE
(44) Hh
Innovators in Trim Design
2.13
Stock lengths:
2.0m x 6 = Packed 12m
Stainless Steel
Formable Edges
Application
Tag Trim profiles can be formed on site toallow freedom of design where a neat edgeis preferred between floor coverings. Typicalapplications include ceramics, carpet tiles,matwell frames and vinyl floors.
Symbols
A – AluminiumB – BrassS – Stainless SteelTT – Tag Trim = Formable
Aluminium formable profile
Stock lengths: 2.715m x 6 = Packed 16.29m
Mainline
3
2.4
Tag Trim is an ever increasing brand,
for sizes and finishes not shown call
our sales office for advice.
TTS6.5TTS9 TTS12 TTS16TTS19TTS22TTS25
Stock lengths:
2.715m x 6 = Packed 16.29m
AluminiumTTA3TTA4.5TTA6.5TTA9TTA13TTA16TTA19TTA22.5TTA25
3
Stock lengths:
2.715m x 6 = Packed 16.29m
Brass
TTB4.5TTB6.5TTB9 TTB13TTB16TTB19
�
�
1.83m x 6 = Packed 10.98m3
TTB25�
�
�
�
�
�
Notched base for ease of curving
Numbers denoteupstand height inmillimetres. Profilessupplied withpolished top edges.
8.5mm�
�
7mm�
�
14��
TT Mainline 2
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
EDGINGS AND ANGLES — MATWELLS
(44) Hh
2.14
PLEASE NOTE
When ordering Matwell framesplease specify either BF (base fix)or TF (top fix) styles.
BF frames are available in all CATstandard edgings and angles,produced with the base inwardsunless otherwise indicated.
For circular frames a suitable planis required or hardboard template.
TF frames are available insuitable angles shown.
SF frames are used whenmatting is fitted above the level ofthe finished floor.
For advice on suitable sectionswith various types of mattingplease call our sales office.
Stock lengths:
Brass: 1.83m x 6 = Packed 10.98m Stainless Steel: 2.0m x 6 = Packed 12m
MattingSF Surface fix frames example
BA BrassSA Stainless SteelSA Stainless Steel Troy
Suitable angles for TF
TF Top fix frames — Supplied drilled (in frames)
BF Base fix frames
Special Services
● Circular and curved frames
● Polished top edge
● Mitred and drilledto customer’s sizes
● Welded frames tospecial order
AR63Aluminium
63��
16
�
�
25
�
� 1.51.5
37.5��25
��
BF Base fix frames
12.5
�
�
BME BrassSME Stainless SteelSME Stainless Steel Troy
Orders for Matwell frames must be accommpanied by a diagram indicating wheremeasurements have been taken from and any tolerences required
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
TIMBERLINE
(44) Hh
Innovators in Trim Design
2.15
Metal References
B – BrassS – Stainless Steel
Stainless Steel is bright finish.Brushed finish to special order.Aluminium available to special order.
Stock lengths:
2.0m x 6 = Packed 12m
Special finishes to order
Refer to special finishes page for moreinformation.Antique bronzeAntique brassTroy stainless steel (timberline 1 & 2) only
Timberline 1
X
�
�
Timberline 2
Timberline 3
ceramictimber
Timberline 4
XTimberline 1/12 12mm
1/15 15mm1/22 22mm
XTimberline 2/12 12mm
2/13B 13mm2/15 15mm2/22 22mm
XTimberline 3/15 15mmTimberline 3/12 12mm
X
�
�
X
�
�
X YTimberline 4/2210 22mm 10mm
4/1510 15mm 10mm4/128 12mm 8mm
X
�
�
Y
�
�Popular with timber and
ceramic floors
Timberline allows for expansion andprovides a neat covering for raw cut edges
DETAIL SHOWN ABOVE IS TROY FINISH
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
(44) Hh
2.16CAPPING PROFILES AND SKIRTING TRIMS
Aluminium
Application:Capping details for floorings wheretraditional timber skirtings are notpreferred.
Stock lengths:
Aluminium: 2.715m x 6 = Packed 16.29mBrass: 2m x 6 = Packed 12mStainless Steel: 2m x 6 = Packed 12m
CAP IT
Finishes
● Mill aluminium● Polished aluminium● Silver anodised● Powder coat to special order
- subject to quantitiesSupplied undrilled
Brass
B CAP
for Prestige installations
● Bright finish
Supplied undrilled
Stainless Steel
SSE
Finishes
● Bright finish● Brushed finishSupplied undrilled
8��
10��
7��
12mm
�
10mm
�
�
12mm
�
�
S CAP
For capping vinyl and
linoleum floorings
● Bright finish● Stainless steelSupplied undrilled
3.5��
8mm�
�
AC50/50 Aluminium
Finishes
● Silver anodised
● Matches AC100 on page 2.9
50��
50
��
�
�
Timberexpansion
�
�
SC50/50 Stainless Steel
Finishes
● Bright● Brushed
50��
50
��
2mm�
�
Timberexpansion
�
�
Skirting Trims
Popular for installationsrequiring perimeterexpansion of woodenfloors, typically sportshalls and large openareas.
Supplied drilled.
�
2.5mm
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
CAT Instep Discs are an attractivealternative to traditional stair nosings orfor highlighting junctions between floorcoverings.
Available in aluminium or brass in avariety of finishes.
Simple to install. Drill a recess 25mm diahole to the correct depth and bond to thestep by means of gap filling adhesive.
For further information on installationplease contact our technical department.
Finishes available:
Aluminium
Silver
Brass
Antique Brass
Antique Bronze
25 discs per pack (not sold individually)
When installing we recommend thefollowing dimensions
75mm centres��
25mm
�
�
3mm�
�
✓✖
CAT Instep Discs installed on a step edgemust have ribs running inline with tread
INSTEP DISCS
(44) Hh
Innovators in Trim Design
2.17
Tread Edge
Innovators in Trim Design
CATWALK
(44) Hh
2.18
InstallationForm base to shape of curverequired and affix to sub floor(ensuring that surface is level)with a suitable adhesive andscrew fixings.When fitting lengths over 2.715malways overlap top jointsby a minimum of 150cm overbase joints.Once base is firmly securedfloorings can be laid and topsdressed in with a rubber mallet.Material must not be stretched
when fitting as this will causetops to contract and causeshrinkage.
Tops are available in colours:
Black
Val Blue
Burgundy
Chocolate Brown
Odyssey
Stock lengths: - tops and bases
2.715m x 6 = Packed 16.29mTops and bases are supplied separately.
FOB
Suitable for domestic and light to medium trafficinstallations, typical applications include carpet tolaminate and ceramic floors.For contract areas with heavy traffic please contact thesales office for alternative products.Cat Walk is an installation friendly PVC system designedfor fast, easy curving of transition profiles on site.Curvable to a minimum radius of 750mm, tops areavailable in twin top T36 and ramp top RT39 styles.
Cat Walk T36 Twin Top Cat Walk RT39 Ramp Top
8
�
�
39�
8
�
�
P8Flexi
P8Flexi
36��
Typical application
�
8�
�
P8Flexibase
8�
�
P8Flexi base
P12Flexibase
12�
�
P12Flexi base
12
�
�
Bases
P8Flexi
P12FlexiBases are supplied pre-drilled
Select basedependenton height offloorcovering
8
�
�
12
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
KLIKS
(44) Hh
2.19
Stock lengths:
2.715m x 6 = Packed 16.29mTops and bases are supplied separately.
Finishes available
KK101 Aluminium SilverKK111 Mill AluminiumKK121 Polished AluminiumKK131 Satin Aluminium
Refer to special finishes page ofthe Comprehensive CAT for moreinformation.
KL IKSEnd Stop ProfilesTo finish the edge of a floor either at theperimeter or at a junction.Ideal for timber, ceramic, carpet, laminateand floor coverings requiring expansionagainst skirtings, walls or hard floorcoverings.Suitable for flooring heights between 9.5-23mm using the bases shown below.
KLIKS End stop with KB1 base
Bases supplied pre-drilled for mechanical and adhesive fixing.
9.5-12mm
�
�
�
� 35 mm
KLIKS End stop with KB2 base
13-17mm
�
�
KLIKS End stop with KB3 base
19-23 mm
�
�
10mm
�
�
VERSATILE
HE
IGH
T
ADJU STABLE
SY
ST
EM
�
� 18 mm
�
� 18 mm
�
� 18 mm
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
KLIKS
(44) Hh
2.20
Stock lengths:
2.715m x 6 = Packed 16.29mTops and bases are supplied separately.
Finishes available
KK32 UPVC SilverKK32 UPVC BlackOther colours available subject tominimum quantities
KL IKSTwin ProfilesKLIKS UPVC twin profiles are designed foruse with lower height floor coverings. Idealfor carpet tiles, ceramic and vinyl coverings.Suitable for residential and light contractuse for floor hieghts between 5mm to 23mm
Bases supplied pre-drilled for mechanical and adhesive fixing.
VERSATILE
HE
IGH
T
ADJU STABLE
SY
ST
EM
5-7mm
�
�
KLIKS Twin Top with KB4 base
�
�
18 mm
�
� 32 mm
5-7mm
�
�
KLIKS Twin Top with KB4 base�
�
18 mm
�
� 32 mm
CAT are continually improving their range of UPVC KLIKS Products
Contact the sales office for more information on 01582 561500
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
KLIKS
(44) Hh
2.21
Stock lengths:
2.715m x 6 = Packed 16.29mTops and bases are supplied separately.
Finishes available
KK102 Aluminium SilverKK112 Mill AluminiumKK122 Polished AluminiumKK132 Satin AluminiumKK2 BrassKK222 ChromeKK232 NisheenKK202 Antique BrassKK212 Antique Bronze
Refer to special finishes page ofthe Comprehensive CAT for more
KL IKSTwin ProfilesKLIKS Twin Profile is to join two floorcoverings of the same height to protect cutedges of flooring.Ideal for joining ceramic, timber, laminatefloors and any other floor type requiringexpansion.Suitable for residential and contract use forflooring heights between 9.5mm-23mmusing the bases shown below.
KLIKS Twin profile with KB1 base
Bases supplied pre-drilled for mechanical and adhesive fixing.
9.5-12mm
�
�
�
� 44 mm
KLIKS Twin profile with KB2 base
13-17mm
�
�
KLIKS Twin profile with KB3 base
19-23 mm
�
�
VERSATILE
HE
IGH
T
ADJU STABLE
SY
ST
EM
�
�
18 mm
�
�
18 mm
�
�
18 mm
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
KLIKS
(44) Hh
2.22
Stock lengths:
2.715m x 6 = Packed 16.29mTops and bases are supplied separately.
Finishes available
KK103 Aluminium SilverKK113 Mill AluminiumKK123 Polished AluminiumKK133 Satin AluminiumKK3 BrassKK223 ChromeKK233 NisheenKK203 Antique BrassKK213 Antique Bronze
Refer to special finishes page ofthe Comprehensive CAT for moreinformation.
KL IKSRamp ProfilesWhere a profile is required toaccommodate situations where oneflooring meets another of a different height.Ideal for timber, ceramics, carpets,laminates, terrazzo and any floor coveringrequiring expansion.Using a suitable base shown below willallow you flexibility with flooring heights.
KLIKS Ramp profile with KB1 Base
Bases supplied pre-drilled for mechanical
and adhesive fixing.
9.5 - 12mm�
�
�
� 55 mm
KLIKS Ramp profile with KB2 Base
13mm - 17mm
�
�
KLIKS Ramp profile with KB3 Base
19mm - 23mm
�
�
�
�
9.5mm - 13.5mm
�
�3.5mm - 7.5mm
VERSATILE
HE
IGH
T
ADJU STABLE
SY
ST
EM
�
� 18 mm
�
� 18 mm
�
� 18 mm
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
KLIKS
(44) Hh
2.23
Stock lengths:
2.715m x 6 = Packed 16.29mTops and bases are supplied separately.
Finishes available
KK104 Aluminium SilverKK114 Mill AluminiumKK124 Polished AluminiumKK134 Satin Aluminium
KL IKSLarge Ramp ProfilesWhere a profile is required toaccommodate situations where oneflooring meets another of a different height.Ideal for timber, ceramics flooringand anyfloor requiring expansion.Using a suitable base will allow youflexibility with flooring heights.
16mm
�
�
KLIKS Large Ramp profile with KB3 Base
19-23mm
�
�
�
�3-7mm
VERSATILE
HE
IGH
T
ADJU STABLE
SY
ST
EM
�
� 18 mm
�
� 18 mm
�
� 70 mm
�
� 70 mm
KLIKS Large Ramp profile with KB2 Base
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
TOB CLIP-IN SYSTEM
(44) Hh
2.24
Typical Applications
Ceramic - Carpet TilePerimeter edged trim
Square edge and twin profilesTop-on-base system “TOB” profiles canbe used with various types of flooringsincluding carpet, laminate, timber andceramics.
®
TOB1 BrassTOB101 Aluminium SilverTOB111 Mill AluminiumTOB121 Polished AluminiumTOB131 Satin Aluminium
A50
The use of a cartridge applied adhesiveis recommended for bases.
A typical application of Timber to Carpet
UPVCBase
UPVC base is inserted intoaluminium A50 base andaffixed to subfloor. Topsare dressed in afterflooring has been installedfor a neat fixing free finish.
Aluminium BaseFor use with Carpets. Suitable with all twintops and P8 and P16 bases.
Stock lengths: - tops and bases
2.715m x 6 = Packed 16.29m
P16
P8
P20
P128
�
�
12
�
�
20
�
�
16
�
�
16��
16��
16��
16��
UPVC BasesPredrilled for mechanical fixing to sub floor.
Square Edge
Typical Applications
Timber - TimberTimber - Ceramic
TOB102 Aluminium SilverTOB112 Mill AluminiumTOB122 Polished AluminiumTOB132 Satin Aluminium
Twin40
��
30��
Produced with a smooth topfor a superb finish.● offset top for expansion
Extra Wide Twin55
��
�
TOB105 Aluminium SilverTOB115 Mill AluminiumTOB125 Polished AluminiumTOB135 Satin Aluminium
For use with P8, P16 bases
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
TOB CLIP - IN - SYSTEMS
(44) Hh
2.25
Clip profile into bases illustrated to createramp heights as shown.
Clip profile into bases illustrated to createramp heights as shown
Ramp profilesRamp tops can be used with allTOB bases to accommodatesituations where a flooring meetsanother flooring of a differentheight.
Stock lengths: - tops and bases
2.715m x 6 = Packed 16.29m
®
TOB3 BrassTOB103 Aluminium SilverTOB113 Mill AluminiumTOB123 Polished AluminiumTOB133 Satin Aluminium
P8 Base
UPVC Bases
8mm - 0mm
P12 Base
12mm - 4mm
16mm - 8mm
20mm - 4mmAluminium Base for CarpetsSuitable with P8 and P16 bases. Can alsobe used where a wider plate is required forfixing to sub floor.
A50�� 50
–1.5mm
20mm - 12mm16mm - 0mm
TOB104 Aluminium SilverTOB114 Mill AluminiumTOB124 Polished AluminiumTOB134 Satin Aluminium
P20Base
P16Base
P16 Base
P20 Base
50��
Brass trims are available in special finishes
�
�
16
�
�
20
�
�
4
�
�
8
�
�
12
�
�
16
�
�
20
�
�
12
�
�
8
�
�
4
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
(44) Hh
2.26REFLEX
Expansion ProfilesReflex expansion and movement jointsare designed for use with all hardflooring, eliminating cracking andprotecting edges against corrosion.Reflex is flame proof, acid and alkaliresistant and stain proof. Underpressure the silicone will compressreadily by 20%.
Stock lengths:
Aluminium and Brass2.715m x 6 = Packed 16.29m
Stainless Steel2.0m x 6 = Packed 12m
Colours avilable:
Grey Black
Other colours available to specialorder subject to minimum orderlevels
RAD 9RBD 9RSD 9
RAS 9RBS 9RSS 9
RAD 13RBD 13RSD 13
RAS 13RBS 13RSS 13
RAP 13RBP 13RSP 13
9mm
�
�
9mm
�
�
13mm
�
�
13mm
�
�
13mm
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Any size availablesubject to minimumquantities
7.5mm�
�
7.5mm�
�
11.5mm
�
�
11.5mm
�
�
12mm
�
�
9mm
�
�
TIGER EYES
(44) Hh
Innovators in Trim Design
3.0
Tiger Eyes is a range of decorativeilluminated floor trims and nosings thatallow the creation of attractive illuminationbetween ceramics, carpets, woods, vinylsand other floors.
Typical installations include nightclubs,cruise liners, hotel and retail environmentswhere areas require illuminating orhighlighting.
The CAT Tiger Eye 12v system comprises of: a lens cap, PVC carrier, LED lights and floorprofile carrier. Easy to install, profile supplied drilled and countersunk for mechanical fixing,remove tape from base of black pvc carrier and stick to channel in profile. Lay the LED stripsinto the black pvc carrier and clip the lens cover into the pvc carrier.
POWER SUPPLY
When connecting the LED lights to the transformer we recommend you use a qualifiedelectrician.
The spacing options are available on all profiles. We would suggest the use of 300mm spacing for floors and 150mm spacing for nosings.
150mm Spacing
300mm Spacing
Red White Blue
Tiger Eyes are available with a choice of power supply unit.
Product Code for Power supply 150mm spacing of LED’s 300mm spacing of LED’s
PTDC/10/12v upto 5 linear metres upto 10 linear metres
INL/60/12v upto 35 linear metres upto 70 linear metres
Power supply unit need to be installed by a qualified electrician and are designed for internal use only.For more technical information regarding the power supply please contact the sales office.
SIMPLE INSTALLATION DIAGRAM
240vMains Supply 12v CAT
TransformerCAT LED Strips
For moredetailedtechnicalinformationplease contactsales office
LED OPTIONS
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
TIGER EYES
(44) Hh
3.1
85��
33
�
�
Stair Nosing
Tiger LN85
NEW Tiger Eyes floor profiles and nosingsare constantly being developed.
Contact the Sales Office for moreinformation.
LC17
Lens Cap
LL5
LED Light strip
LB13 Base
17��
Insert colours available
RibbedBlack
RibbedOdyssey
RibbedWhite
Full range of floor profiles available on page 3-2
Example ofconstructed product
TIGER EYES COMPONENT PARTS
Ribbed insert only
FOB
See page 3.2 for finishes available
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
TIGER EYES
(44) Hh
3.2
Finishes Available
Mill Aluminium
Polished Aluminium
Brass
Antique Brass
Antique Bronze
Stainless Steel Bright
Stainless Steel Brushed
Stainless Steel Troy
Anodised Aluminium
Colour references only apply toTiger Eye range
✔➔
✘➔
Suitability for packing higher
= Can be used with packers
= Cannot be used with packers
For information on more Tiger Eyes profiles please contact CAT
Sizes are approximate and subject to design alteration.
✔➔12
�
�
19��
Tiger 2
Tiger 1
Tiger 4
Tiger AU
Tiger 3
Floor Trims
Typical Application Finishes Selector
✔➔
✔➔
✘➔
8
�
�
53��
8
�
�
33 ��
12
��
19��
✔➔
65��
8
�
�
Wood Carpet
Wood Ceramic
Ceramic Ceramic
Ceramic Ceramic
Wood
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
VERTEX
(44) Hh
4.0
Vertex 1A
Vertex 1S
50�
Vertex 2A
Vertex 2S
Vertex 3S Vertex 22AVertex 22S
Vertex 41AVertex 41S
Internal Corners External Corners
Vertex 31AVertex 31S
Symbols
A – AluminiumS – Stainless Steel
Stock lengths:
2.5m x 6 = Packed 15m
Finishes Refer to special finishes page for more information
Stainless Steel � Bright� Brushed to order� Troy subject to minimum quantities
Aluminium � Mill Aluminium
� Powder coat to special order dependent upon quantity
35��
20��
25��
10��
20
�
�
35
�
�
50
�
�
�
�
20��
20
��
15��
5��
20
�
�
Stainless Steel
Formed in 1.2mm gaugeAluminium
Formed in 1.5mm gauge
Vertex is corner protection from CAT.
Produced from stainless steel andaluminium. Vertex protects corners fromknocks, bumps, trolleys, cases etc.
Available in a variety of sizes for all types ofwall construction.
OTHER SIZES AVAILABLE SUBJECT
TO MINIMUM QUANTITY 50 MTRS
Supplied undrilled for adhesive
fixing. Drilled to special order
Vertex 1S
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
STAIR NOSING — TECHNICAL INFORMATION
(44) Hh
Innovators in Trim Design
5.0
Description
CAT nosings are manufactured to the highest qualityspecification in brass, aluminium and now available in specialfinishes
A selection of nosings have serrated tread details and otherswith PVC inserts in a variety of colours.
Selection
Choose from nosings in various thicknesses and shapes toaccommodate different step edges and floor finishes.
Certain nosings are designed with a diminished edge forinstallation with hard floorings including vinyl, terrazzo, wood, etc.
Installation
It is highly advisable when fitting stair nosings to use screw fixings and a suitable cartridgeadhesive, after ensuring that treads and risers are in good order.
Nosings with PVC inserts can be suppliedpre-infilled with plugs to concealscrewheads
Alternatively you can specify CAT Retrofit
system which eliminates the need for plugs
Refer to pages 5.3 for more informationregarding infill colours
A drop of adhesive isrequired to secure plugsin place.
Nosings with ribbed brass treads can besupplied with smooth plugs to concealscrewheads.
Alternatively nosings can be supplieddrilled flush for brass screws.
Ribbed aluminium treads are suppliedundrilled or can be supplied for screw fixing if required.
To raise the height of nosings to accommodate thicker floor coverings suitable packingstrips of correct gauge can be used, ensuring a good bond is maintained with suitablecartridge adhesive and mechanical fixings.
NEVER FIT NOSINGS OVER EXISTING FLOOR COVERINGS
UNLESS SECTIONS ARE DESIGNED FOR THIS SITUATION.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
STAIR NOSINGS — TECHNICAL INFORMATION
(44) Hh
5.1
Measuring
Steps should be measured and numberedfrom the top of the staircase to the bottom,indicating flights and landings for thecutting and installation plan.
For curved steps please refer to stairnosing fabrication section for advice ontemplating on page 5.2
Supply
Stair nosings can be cut to customers sizesor supplied oversize (by 30mm) if specified,for cutting on site.
Maintenance
Brass nosings are produced with a highlypolished finish, regular cleaning with asuitable metal polish and soft cloth isadvised to maintain their finish,alternatively nosings can be left to ageoxidize for a natural finish.Avoid water and all forms of moisture withbrass nosings.
Aluminium ribbed tread sections which arepolished aluminium can be maintainedwith a metal polish. Anodised and satinnosings should be cleaned with a milddetergent and warm water but must betotally dried immediately after cleaning.
PVC inserts should be cleaned with a milddetergent diluted with water on a damp -not wet - cloth, ensuring that inserts arewiped dry before staircase is open totraffic.
POLISHES AND INDUSTRIAL CLEANING
AGENTS SHOULD NOT BE USED ON
TREADS AND INSERTS AND MAY PROVE
HAZARDOUS IF USED.
DataBrass alloy to BS 2874 : 1986.Aluminium alloy to BS 1474 : 1987.PVC to BS 6746 : 1990.
Special Finishes on Brass Nosings
Available on stock lengths only-please call sales office for availability
Antique brass
Antique bronze
Chrome
Nisheen
For further advice on the maintenance of aparticular product please contact our sales office.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
STAIR NOSING FABRICATION
(44) Hh
Innovators in Trim Design
5.2
Description
A fabrication service is availablefor the curving and shaping of aselection of nosings subject tostep shape.
Also available are mitred andwelded returns and capped endsfor a neat finish to the end ofnosings on open string staircases(see page 5.11).
When ordering curved nosings ahardboard or stiff card template isrequired to work from for eachcurved step.
It is important to contact our sales office for the suitability of sections for curving.
Curves and mitres of chrome nosings are subject to availability.
Instructions
How to Take a Template
Step edge should be free from existing floor covering.
Where required step edge should be made good with repairs beforetemplate is taken.
Offer card on top of stair tread and with a marker pen draw around curve on underside of card at stair edge.
Ensuring that line is uniform cut alongmark, then offer shaped card to step and make any adjustments as required.
All curved nosings are supplied oversize for trimming on site.
The maximum length of a curved nosing in one piece is 3.2 metres.
Please indicate on all templates
● Nosing profile.● Customer name and job reference.● Order number.● Top side of template.● Edge of tread.● Infill colour if PVC insert.● Special drilling instructions.● Allowance (if any) for new floor covering.● When job is required.
Stair Edge
END
MINIMUM OF 300mmOF STRAIGHT LENGTHINDICATING ANGLEOF STRAIGHTLENGTH OF STRAIGHT
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
STAIR NOSING INFILLS
(44) Hh
5.3
LUMINESCENT YELLOWRUSTIC FAWN IVORY SPRUCE JADE YELLOW POPPY CLARET
Cleaning
Infills should be cleaned with a mild detergent, diluted with water on a damp, not wet, clothensuring that infills are completely dry before staircase is open to foot traffic.
Avoid contact with stair nosing carrier.
For a neat, concealed fixing finish specifyRetro Fit when selecting CAT stair nosings withPVC infills.
Nosings are supplied cut to size, predrilled forcountersunk screw fixings. On site, havingsecured nosings to treads with screws andcartridge adhesive, simply peel away protectivecover from adhesive carrier tape and insert infillcolour of choice applying pressure to ensure agood bond, along entire width of tread.
Infills are supplied 50mm oversize with cutnosings.
Infill plugs the alternative method of fixinginfilled nosings to stairs.
Nosings are supplied pre infilled and affixed withscrews and cartridge adhesive to treads. Havingfixed screws a dab of adhesive is applied with amatch (or similar) to heads and plugs gentlytapped home.
Choose from either textured or ribbed finish infillsin a variety of colours to contrast or compliment alltypes of floorings.
NB. Please note colours depicted are representativeonly and are subject to printing interpretations. Fora sample please contact our sales office.
Ribbed Colours
BLACK WHITE ROYAL BLUERACINGGREEN
PISTACHIOGREEN
BURGUNDY POPPY REDAFRICANVIOLET
ODYSSEY VAL BLUECHOCOLATE
BROWN
Textured Colours
BLACK WHITE LIGHT GREY FLINT GRANITE REGENCY DARK BLUE MID BLUE NIMBUS PEAT
Infill Plugs
Retro Fit
Textured Ribbed
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
STAIR NOSING
(44) Hh
Innovators in Trim Design
5.4
BN6
Special finishes to order
Refer to special finishes page for moreinformation
Antique BronzeAntique BrassChrome
Stair nosings can be supplied cut to sizeor in stock lengths at customer’s request.
Chrome stock lengths only.
Stock lengths: 3.5m
Stair nosings with PVC inserts aresupplied with concealing plugs forhidden fixings.
Can be undrilled if preferred.
Alternatively nosings can be drilledthrough carrier only and inserts fittedafter fixing to stairs for a plug freefinish using CAT’s Retrofit system
Please see Technical Information -Installation.
5MM GAUGE NOSINGS
Stair Nosings with PVC inserts
Available in polished brass.
BN5
BN12
SNE Brass Nap Trim
BN42
BN52
30
�
�
60��
60��
BN3
60��
68��
BN8
60��
75��
91��
30
�
�
15
�
�
40
�
�
45
�
�
55
�
�
5�
�
22��
5mm�
�
9mm
�
�
requires dressing downUsed to trap edge and protect
carpet installed behindnosing.
BN55
55
�
�
59.5��
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
STAIR NOSING
(44) Hh
5.5
Special finishes to orderRefer to special finishes page for moreinformation
Antique BronzeAntique BrassChrome
Stair nosings can be supplied cut to size or instock lengths at customer’s request.Chrome-stock lengths only
Stock lengths:3.5m
BN79
BN19
BN17
BN18
BN16
Stair nosings with PVC inserts are suppliedwith concealing plugs for hidden fixings.
Can be undrilled if preferred.
Alternatively nosings can be drilled throughcarrier only and inserts fitted after fixing tostairs for a plug free finish using CAT’sretrofit system
Please see Technical Information -Installation.
3.5MM GAUGE NOSINGS
Polished Brass with PVC inserts
51��
33
�
�
33
�
�
33
�
�
33
�
�
�
�
51��
51��
51��
79��
29
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
STAIR NOSING
(44) Hh
5.6
Special finishes to order
Antique BronzeAntique BrassChromeNisheen
Stair nosings can be supplied cut tosize or in stock lengths at customer’srequest.
Stock lengths: 3.5m
Stair nosings with PVC inserts aresupplied with concealing plugs forhidden fixings.
Can be undrilled if preferred.
Alternatively nosings can be drilledthrough carrier only and inserts fittedafter fixing to stairs for a plug freefinish using CAT’s Retrofit system.
Please see Technical Information -Installation.
Polished Brass
Nosings with feathered edges
BN20
BN14
BN15
1.5MM GAUGE
NOSINGS
Nosings for resilient floorings
3.5MM GAUGE NOSINGS
60��
63.5��
30
�
30
�
�
30
�
�
PVC INSERTS
For domestic stepswith vinyl floorings
BN20/15
BN2150
�
15
�
�
30
�
�
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
50��
50��
Innovators in Trim Design
STAIR NOSINGS
(44) Hh
5.7
Special finishes to order
Refer to special finishes pages formore information
Antique BronzeAntique Brass
Stair nosings can be supplied cut tosize or in stock lengths at customer’srequest.
Stock lengths: 3.5m
BN7 To special order
BN2
BN11
Stair nosings with ribbed treads canbe supplied with either countersunkbrass screws or zinc screws andsmooth concealing plugs securedwith adhesive.
5MM GAUGE NOSINGS
Polished Brass with Ribbed Treads
BN90
BN4
60��
31
�
�
15
�
�
45
�
�
15
�
�
26
�
�
26
�
�
60��
90��
60��
60��
60��
BN1
Maximum length 2.5m
21��
22
�
�
BN25
Stock lengths: 2.715msupplied pre-drilledand 6 lengths to tube
A stylish alternative to Brass nosings withpvc inserts for installations that requireadditional elements of design.
Suitable for use with many floor coveringsincluding wood, ceramics and carpets.
Flush Finish
SmoothPlugs
FOB
74��
BN74
45
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
ALUMINIUM STAIR NOSINGS
(44) Hh
Innovators in Trim Design
5.8
55
Aluminium with Ribbed Treads
AN55
● Mill Aluminium● Satin Aluminium● Polished Aluminium
AE32
Stair nosings can be supplied cut tosize or in stock lengths at customer’srequest.
Stock lengths 3.5m
● Mill Aluminium● Polished Aluminium● Satin Aluminium● Silver Anodised
Refer to special finishespage for more information
55��
66��
�
�
30
�
�
32
�
Edgings
Stock length: 2.715mPacked: 6 x 2.715m
● Bright● Brushed
Made to special order only.
AE32/SStainless Steel Cover
37
�
�
Stock length: 2.0mPacked: 6 x 2.0m
A popular alternative to aluminium nosingswith PVC inserts.
A feathered back edge makes profilessuitable for fixing directly to wood andceramics.
Ideal for finishing edges of flooring
�
11�
�
8�
�
AN2
AN1
30
60��
3.5�
�
3.5�
�
FOB
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
ALUMINIUM STAIR NOSINGS
(44) Hh
5.9
2.5�
�
65��
48
�
�
AN7
17��
34
�
�
AN3
Aluminium with Castellated Treads
● Mill Aluminium● Polished Aluminium● Satin Aluminium
Stair nosings can be supplied cut tosize or in stock lengths at customer’srequest.
Base Fixing
Stock lengths: 3.5m
Available drilled or undrilled.
37��
● Mill Aluminium● Polished Aluminium● Satin Aluminium
Contact CAT for further developments
with aluminium stair nosings and edgings.
6�
�AN445
��
20
�
�
3.5�
�
AN5
2.5�
�
65��
48
�
�
AN6
Aluminium with Castellated Treads
A popular alternative to aluminium nosingswith PVC inserts.
Ideal when a nosing with the same finishon the tread and riser is required.
FOB4.5
�
�
65��
20
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
STAINLESS STEEL STAIR NOSINGS
(44) Hh
Innovators in Trim Design
5.10
Stainless Steel Nosing with infill
Contact CAT for further developments
with aluminium stair nosings and edgings.�
Stainless Steel cover nosing with PVCinsert.
For infill colour choice please refer to
page 5.3
Stair nosings can be supplied cut to size or instock lengths at customer’s request.
Stock lengths:2m
Finishes available
● Bright Stainless Steel● Brushed Stainless Steel
Manufactured to special order, please allow 10 working days
Stair nosings with PVC inserts are suppliedwith concealing plugs for hidden fixings.
Can be supplied undrilled if preferred.
Alternatively nosings can be drilled throughcarrier only and inserts fitted after fixing tostairs for a plug free finish using CAT’sretrofit system
Please see Technical Information -Installation.
60mm��
SN60
37
�
�
8
�
�
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
STAIR NOSING - EDGE TRIMS
(44) Hh
5.11
When trimmed applyadhesive to inside faceof angle and hold till set.
Brass Stair nosing with Stringer Trim
Stair nosings can be suppliedwith welded stringer trims tomask string details wherefloorings are installed on treadonly and riser is left bare or thereare no risers.
Please specify left or right handing when ordering.
Brass Welded Mitre
Stair nosings can be supplied with 90º welded mitres.
When ordering please specify left or right handing, and length of return.
Polished brass angles for usewith CAT stair nosings as amasking detail for externalstrings.
Stringer sizes: 360mm x 360mm
stringer stock lengths: 1.83mtr
Stock angles 83º and 90ºAvailable 81º and 90ºSupplied oversize fortrimming on site.
32
�
�
3
Installation
�
Brass Welded Capped End
Stair nosings can be produced with welded capped ends.
When ordering please specify left or right handing.
4-7mm
�
�
Brass Welded Stringer Trim
Mitres and fabricated nosings are available in chrome subject to approval.
Contact the sales office for more information.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
TYPICAL APPLICATIONS
(44) Hh
Innovators in Trim Design
5.12
BN1 Brass nosing installed on a packer toraise height equal to top of feline edge.
Carpet then installed into feline edge.
BN5 Brass nosing installed on packer toraise to same height equal to top of ceramictile.
AN1 Aluminium nosing directly installed onto wood to create safe edge.
BN20 Brass nosing installed to create neatedging for vinyl.
Use of featheredge required to take awaythickness of BN20 base.
BN17 Brass nosing installed directly tostep edge.
Vinyl is then laid up to the nosing.
These are suggestions only and
consideration needs to be taken into account
of floor coverings being used and that all
step edges have been made good and flat.
Carpet
Ceramic
Packer
Wood
Vinyl
Vinyl
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
THE AKEMAN COLLECTION
(44) Hh
6.0
Stair Rods and Fixing Eyes
The Akeman Collection consists of endlessoptions to enhance the appearance of the moststylish staircases.
Choice
Rods and eyes in a variety of designs in solidbrass, steel and a range of special finishes.
Selection
Rods are produced in various diameters,selecting the most suitable rod is dependentupon:
● personal taste● width of stair runner and stairway● thickness of carpet and underfelt.
Guide for rods with conventional carpet and underfelt
● 10mm rod is suitable to 914mm● 12mm rod is suitable to 1219mm● 16mm rod is suitable to 2440mm● 20mm rod is suitable to 2440mm and over
Please note this is for guidance only, consideration must be given to depth of carpet,effect required, etc. Call our sales office for advice.
Stair rods with carpet runners
Choose from the complete collection including stair clips.
Stair rods with fully fitted carpets
Choose round rods 10, 12, 16mm diameter with top fix eyes.
Measuring
See purchase order template in this catalogue.
Installation
Fix eyes into tread and riser directly alongside edge of carpet runner, leaving a gap ofapproximately 1/8” (3mm). Use rawl plugs for mechanical fixings into concrete stairs anddirect screw fix into timber on wooden staircases, except when ring eyes are fitted and rawlplugs are advised to accept threaded taper fixing. Always use wooden gripper with stair rods.
When installing top fix eyes for fully fitted carpets exercise caution when fixing throughcarpet.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
THE AKEMAN COLLECTION
(44) Hh
Innovators in Trim Design
6.1
Brass Stair Rods and Eyes
Solid Round Rods Turned Finials (available in 10, 12, 16 and 19mm diameters)
Hollow Round Rods Push-in Finials
Hollow Reeded Rods Push-in Finials (only available in 16mm diameter)
Solid Round Rods Large Finials
BALL ACORN
MINSTREL
CASTLE
CORONET
TURRET OVAL SPEAR BEACON
BALL12 & 16mm
ACORN12 & 16mm
ARROW + FLIGHT16mm
TREFOIL16mm
SPEAR16mm
FLEUR DE LYS16mm
BALL ACORN ARROW + FLIGHT TREFOIL SPEAR FLEUR DE LYS
SOLAR
FOB
JESTER12mm
MANHATTAN12mm
BALL16 & 20mm
ACORN16 & 20mm
PINEAPPLE16 & 20mm
NEW STYLES
NEW STYLES
ARROW + FLIGHT
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
THE AKEMAN COLLECTION
(44) Hh
6.2
Brass Stair Rods and Eyes
Solid Triangular Rods Welded Finials (only available in 22mm face)
Steel Stair Rods and Eyes
Solid Round Rods Turned Ends (available in 12 and 16mm diameters)
Stair Clips
SPEAR ACORN OVAL TURRET BALL CASTLE
PLAIN END TREFOIL FLEUR-DE-LYS SPEAR
BRASS ANTIQUE BRASS ANTIQUE BRONZE GUNMETAL STEEL CHROME
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
THE AKEMAN COLLECTION
(44) Hh
6.3
Brass Fixing Eyes
Suitable with roundrods in diameters
- 10, 12, 16, 19mm.
For stairs with openstrings and rod removal
is not required.
Suitable with roundrods in diameters
- 10, 12, 16, 19mm.
Recommended whereregular removal of rods
is required.
Plain Eye
Steel Fixing Eyes
Produced in steel to the same specification as brass eyes.
Suitable with round steel rods 12 and 16mmdiameter. Plain and hinged eyes.
Not available in high style.
Plain Eye
Hinged Eye
Specification asstandard plain eye butwith deeper tread andriser detail - 12, 16mm.
Recommended withparticularly thickcarpets and felt.
Specification asstandard hinged eye butwith deeper tread andriser detail - 12, 16mm.
Recommended withparticularly thickcarpets and felt.
High StylePlain Eye
High StyleHinged Eye
Suitable with plainended triangular rodsfor stairs with open
strings and rod removal is not
required.
Suitable with triangular rods for
stairs where regularremoval of rods is
required.
Plain EyeTriangular
Hinged EyeTriangular
Suitable with round rods - 10, 12, 16mm
diameter. Use with fullwidth carpets and turnedrods to create traditional
effect. Caution whenfixing eyes through
carpet.
Neat and unobtrusivewith round rods - 10,12, 16mm diameter.
Fix into treads or riser.Do not overtighten anddamage thread. Always
use rawl plugs whenfixing.
Top Fix Eye Ring Eye
Hinged Eye
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
THE AKEMAN COLLECTION — SPECIAL FINISHES
(44) Hh
6.4
BLACK POWDER is a finish applied byspray electrostatically and produces a
superior finish to traditional metal paints.
ANTIQUE BRASS ANTIQUE BRONZE GUNMETAL
BRIGHT CHROME SATIN CHROME BRIGHT NICKEL SATIN NICKEL
Finishes on Steel Rods and Eyes - availability is subject to quantity required.
Please note: Antique finishes are hand applied and will vary in shade from order toorder, though efforts will be made to match to samples if supplied.
Special Finishes for Stair Rods and Eyes
Finishes on Brass Rods and Eyes
New Look! Old Effect! Always Stylish!When choosing C.A.T. consider our special finishes.
FOB
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
THE AKEMAN COLLECTION — PRE-PACK RANGE
(44) Hh
6.5
Stair rods are produced in 12mm diameter hollow tube 1 metre in length and are suitablefor stairs with carpet runners to 900mm (36”) in width.
How to Measure for Stair Rods
Measure the full width of carpet runner and add a minimum of 100mm including finials togive finished rod length, subject to maximum available width of staircase. Cut rod to sizewith a hacksaw, being careful to cut evenly and clean burred edges with emery clothallowing finial to be inserted.
To increase tightness of finial in tube turn nut on thread to expand rubber bung.
Stair eyes should be fixed directly alongside edge of runner. Use rawl plugs formechanical fixings into concrete stair and direct screw fix into timber (having drilled pilot hole first) on wooden stair.
Pre-Pack Economy Range
Suitable for carpet runners to 900mm (36”).
Choice of finishes available.
Superb value and quality.
Each pack contains:
● 13 x 1 metre stair rods with push-in finials.● 26 x hinged fixing eyes with screws.
Note: Not available singly.
Brass Chrome Satin Chrome
Suitable for stairs with carpet runners
Chooseeither ballor acornfinials.
Please note: stair rods and eyes are designedfor decorative appeal and should always beused in conjunction with wooden gripper forfixing carpet to stairs.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
THE AKEMAN COLLECTION
(44) Hh
6.6
Joining Detail!
When rods over 3000mm in length are required we advisethe use of a centre joining detail.
Available for 20mm rods.
Can also be used with 25mm rods which have beenrebated to accept 20mm fixing eyes.
Stop That Spinning!
New improvement to hinged eyes. A rubber pad to helpprevent rods turning by creating a compressed fit intoeyes.
This rod’s going nowhere!
Oversize rods with rebate, used with hinged eye, theultimate solution to rods that move.
Available to special order, round rods only.
Please note: dimensions are critical with this type of rod.Ideal for large projects requiring long rods.
Curved rods can beproduced from customer’stemplates.
Stair Rod Fabrication
For the situations when you can’t always tread the straight and narrow!
Special Products
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
PURCHASE ORDER TEMPLATE
(44) Hh
7.1
The Akeman Collection
Purchase Order Form for Stair Rods, Eyes and Stair Clips1.5% Discount on all Orders Placed on this Template Form.
Orders placed subject to C.A.T. normal Terms and Conditions of Sale
COMPANY INVOICE ADDRESS:
CONTACT
TEL
FAX
EMAIL DELIVERY ADDRESS:
ORDER NO.
ACCOUNT NO.
DATE OF ORDER
DELIVERY DATE
SPECIAL INSTRUCTIONS
TIPS FOR MEASURING STAIR RODS
For rods with carpet runners, measure the full width of the runner and add a minimum of 100mm for10mm, 12mm and 16mm turned rods and 150mm for rods with large finials having given considerationto available staircase width.
For rods with full width carpets using top fix eyes, measure stairs full width and deduct a suitableamount to create best effect. Always number stairs from top down to bottom.
STAIR RODS FIXING EYES – sold in pairs
ROD TYPE EYE TYPE
DIAMETER
FINIAL TYPE QUANTITY
FINISH
SIZES: TIP TO TIP MEASUREMENT STAIR CLIPS
FINISH
NUMBER OFCLIPS IN PAIRS
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
PURCHASE ORDER TEMPLATE
(44) Hh
7.2
SPECIAL INSTRUCTIONS
Purchase Order Form for Stair Nosings1.5% Discount on all Orders Placed on this Template Form.
Orders placed subject to C.A.T. normal Terms and Conditions of Sale
MEASURING
Steps should be measured and numbered from the top of the staircase to the bottom, indicatingflights and landings for the cutting and installation plan. For curved steps please refer to stair nosingfabrication section for advice on templating.Stair nosings can be supplied in various lengths.● stock lengths● cut to size● oversize (by 30mm) if specified for cutting on site
ORDER
Nosing reference Insert colour
Drilled Undrilled
Curves / Yes No
SIZES
COMPANY INVOICE ADDRESS:
CONTACT
TEL
FAX
EMAIL DELIVERY ADDRESS:
ORDER NO.
ACCOUNT NO.
DATE OF ORDER
DELIVERY DATE
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
PURCHASE ORDER TEMPLATE 7.3
(44) Hh
SPECIAL INSTRUCTIONS
Purchase Order Form - General1.5% Discount on all Orders Placed on this Template Form.
Orders placed subject to C.A.T. normal Terms and Conditions of Sale
INVOICE ADDRESS: DELIVERY ADDRESS:
TEL TEL
FAX FAX
EMAIL EMAIL
COMPANY CONTACT
TEL
FAX
EMAIL ORDER NO.
ACCOUNT NO.
DATE OF ORDER
DELIVERY DATE
PRODUCTS
Innovators in Trim DesignCONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900
Innovators in Trim Design
LOCATION DIRECTIONS
(44) Hh
8.1
FROM THE NORTH – Total distance from junction 12 to CAT – 5miles
Exit from the M1 at junction 12 Toddington services, turn immediately right over the motorway, thentake the first turning on your left (the B579) towards Chalton and Luton.
Stay on the road for a distance of just under 1.5 miles, at the T junction turn left on the B579signposted Chalton and Luton, continuing past the Fancott Public House.
After approximately one mile you will be entering the village of Chalton with the Star Public Houseon your left hand side. Continue up the hill, as you proceed over the motorway bridge at the apex ofthe hill, turn left into Sundon Road signposted Sundon and Streatly.
Continue over the railway bridge, proceed through the small village and down the hill, with fields toleft and right of you.
At the foot of the hill on the bend turn right, signposted Luton Industrial Estates (you are now onSundon Park Road).
Proceed signposted Park Avenue Industrial Estate and town centre, straight over first roundabout stillon Sundon Park Road.
Continue past Luton Enterprise Park on your right hand side and a school on your left hand side.There is a sign next to the traffic camera indicating industrial estates.
Take an immediate right turn before the shops, which are on your left, into Park Avenue leading toScott Road.
You are now entering Park Avenue Estate, continue past the security hut on your left and take thesecond and last turning on your right.
Continue for another couple of hundred yards and CAT is a red and blue building in front of you.
Please report to the trade counter situated on the right hand side of the building.
FROM THE SOUTH – Total distance from junction 11 to CAT – 3.5 miles
Exit from the M1 at junction 11 and turn right, back under the motorway, on Dunstable Road.Continue along Dunstable Road until the traffic lights with the Leicester Arms on your right handside, turn immediately left into Humberstone Road.
At the end of Humberstone Road proceed over the roundabout into Oakley Road, past Electrolux.
When you see the sign for the Sugar Loaf Public House on your right hand side, take the right handlane at the lights.
Turn right into High Street. Proceed along into Grange Avenue until you see signpost for B579 toToddington, at traffic lights turn left before railway bridge into Toddington Road.
At the Sundon arch sign turn right, signposted Sundon 2.5 miles. Continue under railway bridge andturn left at mini roundabout into Sundon Park Road.
Proceed past Leagrave Motor Company and Jet Garage. Go over the mini roundabout and over zebracrossing with shops on right hand side.
Turn left into Park Avenue Estate. Continue past the security hut on your left and take the second andlast turning on your right.
Continue for another couple of hundred yards and CAT is a red and blue building in front of you.
Please report to the trade counter situated on the right hand side of the building.
CONTACT CATwww.cat-accs.com e: [email protected] t: 01582 561500 f: 01582 561900