Upload
anca-hritcu
View
35
Download
4
Embed Size (px)
Citation preview
product catalogueALFA IN a.s.
ww
w.a
lfai
n.eu
CONTENTS
STEP-SWITCHED MIG/MAG MACHINESABC, ALF, ATA 13
PLASMAAPC-IN, APC CHOPPER CUT 19
CHOPPERSA CHOPPER 17
OVERVIEW OF FEEDERS AND MIG/MAG CONTROL BOARDS 12
MULTIFUNCTION INVERTERSALFIN MF, ALFIN MPK 10
AC/DC INVERTERSALFIN AC/DC 9
TIG INVERTERSALFIN TIG HF, PEGAS T HF 7
MMA INVERTERSPEGAS, ALFIN 5
PULSEATA PULSE 2 MOBIL, ATA PULSE 2 18
OVERVIEW OF FUNCTIONS4
OVERVIEW OF FUNCTIONS
1 x 230 V power supply.
Electronic feedback of wire feeder speed.
3 x 400 V power supply.
Arc ignition by high frequency current.
AC Pulse - welding with pulsed alternate current.
The HOTSTART function facilitates the arc ignition by using high starting current for a predefined period of time.
AC/DC - directed or alternate current.
Inverter welding current source.
Digital amperemeter and voltmeter.
The machine is equipped with a memory to store your preferred parameters for various welding tasks (jobs).
The ANTISTICK technology prevents the electrode from sticking to the weld-piece.
Adjustable down-slope time from working current to end current.
The ARCFORCE technology automatically levels voltage fluctuations in the arc caused by the movement of welder‘s hand.
The LIFT ARC technology enables easy arc ignition by switching on the torch while it touches the weld-piece and then lifting it.
The BILEVEL technology allows the welder to switch between two predefined currents during welding.
The machine is designed for MIG/MAG welding using filler-wire and shielding gas also known as CO2 welding.
Automatic spot or seam welding in pre-set intervals.
MMA welding (manual electrode welding).
Quality all-copper transformer.
Adjustable slope-up time from the starting current to the working current.
Remote control is supported.
Machine power is regulated in steps by connecting the various transformer taps.
DC - directed current welding.
Thermal protection that switches the machine off when overheating occurs.
The post-gas time after finishing welding is adjustable.
Pre-gas and post-gas times are adjustable.
Adjustable welding wire burn-back time.
The pre-gas time before arc ignition is adjustable.
Contact arc ignition by touching the weld-piece with the tungsten electrode.
Lightweight and portable machine.
Welding in 2-stroke and 4-stroke mode.
Pulsed current welding.
Adjustable starting speed of the wire feeder allows easier arc ignition and beginning of welding.
Synergic mode allows you to set a single parameter and the machine calculates all other parameters accordingly.
TIG welding (tungsten electrode in inert gas).
Forced air cooling with ventilators.
Machine can be restored to default factory settings - RESET.
Synergic mode can be used for pulse welding as well.
Water-cooling unit.
OVERVIEW OF FUNCTIONS4
PEGAS 130 EPEGAS 160 EPEGAS 200 E PEGAS 250 E PEGAS 250 E CEL
FUNCTIONS
• IGBT technology• Compact, lightweight, portable• ANTISTICK, ARCFORCE, HOT-START• Protected and POWER GENERATOR compatible• Cable connectors 35-50 mm2 (PEGAS 130 10-25mm2).• PEGAS 250 E CEL welds also with cellulose coated electrodes
FEATURES
RECOMMENDED ACCESSORIES
TIG TORCHHELMET CABLES
TECHNICAL DATA
MMA INVERTERS
CASE
Machine type PEGAS 130 E PEGAS 160 E PEGAS 200 E PEGAS 250 E PEGAS 250 E CEL
Mains voltage 1x230V~ / 50-60Hz 1x230V~ / 50-60Hz 1x230V~ / 50-60Hz 3x400V~ / 50-60Hz 3x400V~ / 50-60Hz
Mains protection 16A DELAYED 16A DELAYED 16A DELAYED 16A DELAYED 16A DELAYED
Effectivity > 80% > 80% > 80% > 84% ≥ 84%
Max. input current 27,0A 31,0A 37,5A 16,5 A 17A
Max. input power 3,6kW 5,0kW 6,6kW - -
Open circuit voltage 66V 62V 63,6V 66 V 90V
Welding current range 5-130A 5-160A 5-200A 10 - 250 A 10 – 250A
Duty cycle 100% - 40°C/10 min. 50A 80A 100A 160 A 200A
Duty cycle 100% - 25°C/10 min. 80A 110A 130A 200 A 250A
Max. duty cycle - 40°C/10 min. 20% 25% 25% - -
Max. duty cycle - 25°C/10 min. 35% 35% 35% - -
Insulation class F F F F F
Protection rating IP23 IP23 IP23 IP23 IP 23
Construction norms EN60974-1 EN60974-1 EN60974-1 EN60974-1 EN60974-1
Dimensions (W x L x H) 120 x 280 x 220 140 x 310 x 230 mm 140 x 345 x 230 490 x 240 x 400 mm 490 x 240 x 400 mm
Weight 4kg 6 kg 7,5 kg 22 kg 22 kg
Electrode diameter Ø 2.5, Ø 3.2 Ø 2.5, Ø 3.2, Ø 4.0 Ø 2.5, Ø 3.2, Ø 4.0 Ø 2.5, Ø 3.2, Ø 4.0, Ø 5.0 Ø 2.5, Ø 3.2, Ø 4.0, Ø 5.0
Electrode type 6013, 7018, … 6011, 6013, 7018, … 6011, 6013, 7018, … 6011, 6013, 7018, … 6011, 6013, 7018, …
5
PEGAS 130 E X XPEGAS 160 E X XPEGAS 200 E X XPEGAS 250 E X
PEGAS 250 E CEL X
REMOTECONTROL
ALFIN 150 TPALFIN 160ALFIN 200ALFIN 250
• IGBT technology• ANTISTICK, ARC-FORCE, HOT-START• Welding inverter for MMA and TIG LIFT ARC welding• TP - TOTAL PROTECTION (ALFIN 150 TP)
FEATURESALFIN 150 TP ALFIN 160/200
ALFIN 250FUNCTIONS
ALFIN 150 TP X X
ALFIN 160 X ALFIN 200 X ALFIN 250 X
1x230 V
ONE-PHASE230 VOLTPOW ERED
3x4 0 0 V
THREE-PHASE40 0 VOLTPOW ERED
MMA TIG LIFT ARC ANTISTICK THERMALPROTECTION
STOP
REMOTECONTROL
f1
f2
INVERTER HOTSTART ARCFORCE
DC
AIR FORCEDCOOLING
PORTABLE
TECHNICAL DATA
TIG TORCHHELMET CABLES
RECOMMENDED ACCESSORIES
REMOTECONTROL
MMA INVERTERS
TRANSFORM.VALVE
6
TECHNICAL DATA
• Welding inverter for TIG and MMA welding• IGBT technology
ALFIN 150 TIG HF
PEGAS 160 T HFPEGAS 200 T HF
FEATURES
FUNCTIONS
TIG TORCHHELMET CABLES CASE
TIG INVERTERS
TRANSFORM.VALVE
ALFIN 150 TIG HFALFIN 170 TIG HFALFIN 200 TIG HFPEGAS 160 T HFPEGAS 200 T HF
ALFIN 170/200 TIG HF
ALFIN 150 TIG HF X X X
ALFIN 170 TIG HF X X X
ALFIN 200 TIG HF X X X PEGAS 160 T HF X X X X X
PEGAS 200 T HF X X X X X
1x230 V
ONE-PHASE230 VOLTPOWERED
ANTISTICK THERMALPROTECTION
STOPf1
f2INVERTER HOTSTART ARCFORCE
DC
PORTABLETIG HIGH FREQUENCYIGNITION
HFPULSE
3x400 V
THREE-PHASE400 VOLTPOWERED
SYNERGICPULSE
SYNERGYSYNERGY
JOB
JOBSTORE
REMOTECONTROL
AIR FORCEDCOOLING
RECOMMENDED ACCESSORIES
Machine type ALFIN 150 TIG HF ALFIN 170 TIG HF ALFIN 200 TIG HF
Welding current range 5 - 150A 5 – 170A 5 – 200A
Input voltage 1 x 230V~ / 50-60Hz 1x230V~ / 50-60Hz 3x400V~ / 50-60Hz
Mains protection 16A DELAYED 16A DELAYED 10A DELAYED
Effectivity 0,85 0,85 0,85
Welding method MMA TIG TIG MMA TIG MMA
Duty cykle 35% 100% 35% 100% 40% 100% 40% 100% 40% 100% 40% 100%
Max. input power 5,6KVA 3,9KVA 4,1KVA 2,5KVA 5,1KVA 3,4KVA 6,3KVA 5KVA - - 10KVA 6,2KVA
Max. input current 24,3A 17,0A 17,8A 10,9A 22,4A 15A 27,8A 21,8A - - 14,5A 9A
Welding current 140A 100A 150A 100A 170A 120A 140A 120A 200A 130A 200A 130A
Working voltage 25,6V 24,0V 16,0V 14,0V 16,8V 14,8V 25,6V 24,8V 18V 15,2V 28V 25,2V
Open circuit voltage 94V 10V 14V 65V 14V 65V
Insulation class H H H
Protection rating IP23 IP 23 IP 23
Cooling AF AF AF
Construction norms EN 60974-1/-10 EN 60974–1 EN 60974–1
Dimensions (W x L x H) 120 x 360 x 215 mm 160 x 400 x 260 mm 160 x 400 x 260 mm
Weight 5,4Kg 10 Kg 10 Kg
Machine type PEGAS 160 T HF PEGAS 200 T HF
Welding current range 5-160A 5-170A (200A TIG)
Input voltage 1x230V~ / 50-60Hz 1x230V~ / 50-60Hz
Mains protection 16A DELAYED 16A DELAYED
Effectivity > 80% > 80%
Welding method MMA TIG MMA TIG
Duty cykle 25% 100% 25% 100% 30% 100% 25% 100%
Max. input power 3,3 kW 5,3 kW 4,6 kW 5,4 kW
Welding current 160A 80A 160A 80A 170A 100A 200A 100A
Open circuit voltage 58 V 62 V
Insulation class F F
Protection rating IP 23 IP 23
Cooling AF AF
Construction norms EN60974-1 EN60974-1
Dimensions (W x L x H) 130 x 450 x 230 mm 130 x 450 x 230 mm
Weight 6,5 kg 8 kg
7
ALFIN 202 TIG HF ALFIN 250 TIG HFALFIN 281 W TIG HF Synergy
• Welding inverter for TIG and MMA welding.• TIG pulse• Two currents - BILEVEL• Synergic pulse• 50 memory positions
TECHNICAL DATA
FEATURES
FUNCTIONS
RECOMMENDED ACCESSORIES
TIG INVERTERS
ALFIN 202/250 TIG HF
ALFIN 281 TIG HF
AALLFFIINN 202 TTIIGG HHFF XX XX
AALLFFIINN 250250 TTIIGG HHFF XX XX XX AALLFFIINN 228181 TTIIGG HHFF SSYYNN XX XX
11xx230230 VV
OONNEE--PPHHAASSEE230230 VVOOLLTTPPOOWWEERREEDD
AANNTTIISSTTIICCKK TTHHEERRMMAALLPPRROOTTEECCTTIIOONN
SSTTOOPPff11
ff22IINNVVEERRTTEERR HHOOTTSSTTAARRTT AARRCCFFOORRCCEE
DDCC
PPOORRTTAABBLLEETTIIGG HHIIGGHH FFRREEQQUUEENNCCYYIIGGNNIITTIIOONN
HHFFPPUULLSSEE
33xx400400 VV
TTHHRREEEE--PPHHAASSEE400400 VVOOLLTTPOPOWWEERREEDD
SSYYNNEERRGGIICCPPUULLSSEE
SSYYNNEERRGGYYSSYYNNEERRGGYY
JJOOBB
JJOOBBSSTTOORREE
RREEMMOOTTEECCOONNTTRROOLL
Machine type ALFIN 202 TIG HF ALFIN 250 TIG HF ALFIN 281 W TIG HF
Welding current range 5 – 200A 5 – 250A 5 – 280A
Input voltage 1x230V~ / 50-60Hz 3x400V~ / 50-60Hz 3x400V~ / 50-60Hz
Mains protection 25A DELAYED 16A DELAYED 20A DELAYED
Effectivity 0,85 0,85 0,85
Welding method TIG MMA TIG MMA TIG MMA
Duty cykle 60% 100% 65% 100% 60% 100% 60% 100% 50% 100% 40% 100%
Max. input power 5,3KVA 4,5KVA 6,5KVA 5,0KVA 8,4KVA 6,7KVA 9,9KVA 8,4KVA 9,6KVA 5,8KVA 12,1KVA 7,3KVA
Max. input current - - - - 12,2A 9,4A 14,3A 12,3A 14A 17,5A
Welding current 180A 160A 150A 120A 250A 210A 230A 200A 280A 200A 250A 160A
Working voltage 17,2V 16,4V 26V 24,8V 20V 18,4V 29,2V 28V 21,2V 18V 30V 26,4V
Open circuit voltage 11V 84V 9V 76V 9V 76V
Insulation class H H H
Protection rating IP 23 IP 23S IP 23
Cooling AF AF AF
Construction norms EN 60974–1 EN 60974–1 EN 60974–1
Dimensions (W x L x H) 230 x 460 x 3251 mm 230 x 460 x 325 mm 230 x 530 x 325 mm
Weight 15 Kg 19 Kg 20 Kg
TROLLY COLLING UNIT
8
TIG TORCHHELMET CABLES REMOTECONTROL
TRANSFORM.VALVE
REMOTE CONTROL
PEDAL
ALFIN 200 AC/DCALFIN 220 AC/DCALFIN 280 AC/DCALFIN 281 AC/DC
• Welding inverter for welding steel, stainless steel and aluminium by TIG AC/DC and MMA methods.
• TIG pulse• BILEVEL - two currents• IGBT technology• Remote control
FUNCTIONS
TECHNICAL DATA
ALFIN 200 AC/DC X X X X
ALFIN 220 AC/DC X ALFIN 280 AC/DC X X X X ALFIN 281 AC/DC X
1 x23 0 V
ONE-PHASE2 30 VOLTPOW ERED
ANTISTICK THERMALPROTECTION
STOPf1
f2
INVERTER HOTSTART ARCFORCETIG HIGH FREQUENCYIGNITION
HF3x4 0 0 V
THREE-PHASE40 0 VOLTPOW ERED
AC/ DC
TIGALUMINIUM
WELDING
PULSE SYNERGICPULSE
SYNERGYSYNERGY
JOBJOB
STOREAC PULSE W ATER
COOLING
FEATURES
ALFIN 200/220 AC/DC
ALFIN 280/281 AC/DC
RECOMMENDED ACCESSORIES
TIG TORCHHELMET CABLES REMOTECONTROL
AC/DC INVERTERS
TRANSFORM.VALVE
REMOTE CONTROL
PEDAL
9
TECHNICAL DATA
FEATURES
FUNCTIONS
RECOMMENDED ACCESSORIES
TIG TORCHHELMET CABLESMIG/MAG
STANDARDTORCH
MULTIFUNCTION INVERTERS10
TRANSFORM.VALVE
PEGAS 160 MIG MAN PEGAS 160 MIG SYN ALFIN 161 MTM
ALFIN 160 MTM
PEGAS 160 MIG• IGBT technology• Compact, lightweight, portable• digital control system, real-time display welding parameter by
PEGAS 160 MIG• synergic control welding current/voltage (mig)
by PEGAS 160 MIG SYN• High performance multiprocess power source
(MMA/MIG/MAG/Lift Tig) MAG welding with self-shielding wire
• Welds with electrodes up to diameter of 4,0 mm
PEGAS 160 MIG ALFIN 161 MTM X X
Units PEGAS 160 MIG ALFIN 161 MTMMethod MIG/MAG MMA TIG MIG/MAG MMA TIGMains voltage V/Hz 1x230/50-60 1x230/50-60Mains protection A 16 deayed 16 deayedMax. input power I1 A 25,9 33,3 22,1 27Max. effective current I1eff A 14,2 18,2 12,1 16Welding current range A/V 25/15,3 - 160/22 10/20,4 - 160/26,4 10/10,4 - 160/16,4 20/15 - 160/22 5/20 - 140/25,6 5/10 - 140/15,6Open-circuit voltage U20 V 58 10 91 10Welding current (DC=100%) I2 /U2 A/V 90/18,5 90/23,6 90/13,6 110/16,5 100/24 100/14Welding current (DC=60%) I2/U2 A/V 115/19,8 115/24,6 115/14,6Welding current (DC=x%) I2/U2 A/V 30%=160/22 30%=160/26,4 30%=160/16,4 35%=160/22 35%=140/26,5 35%=140/15,6Power factor cosφ 0,83 0,9Insulation class F HProtection IP 23 IP 23Standards EN 60974-1 EN 60974-1Dimensions (w x l x h) generator mm 470x210x380 230 x 460 x 325Weight - compact/generator kg 11,5 12Wire speed m/min 0,5 - 16
ALFIN 250 MPKALFIN 250 MPK industryALFIN 251 MTM
TECHNICAL DATA
• Synergic multifunction welding machines for MIG/MAG, MMA and TIG welding.
MIG/MAG• 12 synergic pre-set programs• Manual mode for custom setting• SOFT START• Electronic choke• Voltage correction ± 2V
FEATURES
FUNCTIONS
RECOMMENDED ACCESSORIES
TIG TORCHHELMET CABLESMIG/MAG
STANDARDTORCH
ALFIN 250 MPK
ALFIN 250 MPK industry
ALFIN 251 MTM
MULTIFUNCTION INVERTERS
TRANSFORM.VALVE
11
OVERVIEW OF FEEDERS AND CONTROL BOARDS
MIG/MAG CONTROL BOARDS
Feature
UP-DOWN torch support x
xxxx
☺x
☺☺
☺
xxx
☺☺☺☺☺
☺
☺☺x
☺☺☺☺☺
☺
☺☺☺☺☺☺☺☺
2 stoke / 4 stroke
Adjustable post and pre-gas time
Spot and seam welding
A + V meter
Wire initial speed (Soft Start)
Advice of the parameter settings
Electronic feedback of the wire speed
Adjustable burn-back time
BASIC MINOR 2 MAJOR SYNERGY
MIG/MAG FEEDERS
FOUR-ROLL FEEDERStandard in ATA 400-600 HD and A CHOPPER machines.
TWO-ROLL FEEDERStandard in ABC and ALF machines.
a b
Steel wire
Ø 0.6 - 2.4 mm Ø 0.8 - 2.0 mm
Aluminium wire
Ø 0.8 - 2.4 mm
Tube wire
PS 2(W)2-roll
PS 4(W)4-roll
a = 22 mmb = 30 mm
a = 22 mmb = 30 mm
12
ABC 155 FIXABC 164 HD
TECHNICAL DATA
• MIG/MAG welding machine• All-copper transformers• The FIX version features a fixed torch• The EURO version utilizes an EURO torch connector
FEATURESABC 155 FIX
ABC 164 HDFUNCTIONS
BASIC MINOR 2 MAJOR SYNERGY
APPLICABLE CONTROL BOARDS
RECOMMENDED ACCESSORIES
MIG/MAGSTANDARD
TORCHHELMET
STEP-SWITCHED MIG/MAG MACHINES
TRANSFORM.VALVE
13
ENGLISH Jednotky ABC 155 ABC 164 HDMethod MIG/MAG MIG/MAGMains voltage V/Hz 1 x 230/50 1 x 230/50Mains protection A 1600% 1600%Max. input power I1 A 21 21Max. effective current I1eff A 980% 980%Power factor cosφ 0,9 0,9Welding current range A/V 20/15,0 - 160/22,0 20/15,0 ÷ 160/22,0Open-circuit voltage U20 V 22,0 - 42,5 22,0 ÷ 42,5Welding current (DC=100%) I2 /U2 A/V 55/16,8 55/16,8Welding current (DC=60%) I2 /U2 A/V 80/18,0 80/18,0Welding current (DC=x%) I2 /U2 A/V 15%=160/22,0 20%=160/22,0Voltage steps 6 6Insulation class F FProtection IP 21 IP21Standards ČSN EN 60974-1 EN 60 974-1Dimensions (w x l x h) mm 350 x 750 x 620 470 x 800 x 650Weight kg 4100% 48 (without torch)Wire speed m/min 1 - 16 1 - 16Spool diameter mm max. 300 mm max. 300 mmSpool weight kg Spulegewicht kg
ALF 180 - 220 HD
• MIG/MAG welding machine• Heavy duty assembled casing - HD• All-copper transformers• Seven voltage adjustment steps• EURO torch connector• Gas pre-heater
FUNCTIONS
MIG/MAG STEP-SWITCHEDVOLTAGE
Cu
ALL-COPPERTRANSFORMER
3x400 V
THREE-PHASE400 VOLTPOWERED
BURNBACK
SPOT ANDINTERVALWELDING
SPOT2T
4T2-STROKE4-STROKE
ADJUSTABLEBURN BACK TIME
PRE-GASAND
POST-GAS
SOFTSTART
ADJUSTABLEINITIAL
WIRE SPEED
ELECTRONICFEEDBACK
APPLICABLE CONTROL BOARDS
BASIC MINOR 2 MAJOR SYNERGY
TECHNICAL DATA
FEATURES
RECOMMENDED ACCESSORIES
MIG/MAGSTANDARD
TORCHHELMET
MIG/MAGUP-DOWN
TORCH
STEP-SWITCHED MIG/MAG MACHINES
TRANSFORM.VALVE
BASIC MINOR 2 MAJOR SYNERGY
STANDARD OPTIONAL
14
ALF 250 - 400 HD
• MIG/MAG welding machine• All-copper transformers (ALF 250 transformer Cu-Al)• Compact or with a separate wire feeder.• UP-DOWN torches supported (not in BASIC version)• Gas pre-heater• ALF 250 HD just with the MAJOR control board
FUNCTIONS
MIG/MAG STEP-SWITCHEDVOLTAGE
Cu
ALL-COPPERTRANSFORMER
3x400 V
THREE-PHASE400 VOLTPOWERED
SPOT ANDINTERVALWELDING
SPOT2T
4T2-STROKE4-STROKE
BURNBACK
ADJUSTABLEBURN BACK TIME
PRE-GASAND
POST-GAS
SOFTSTART
ADJUSTABLEINITIAL
WIRE SPEED
ELECTRONICFEEDBACK
REMOTECONTROL
RESET
APPLICABLE CONTROL BOARDS
BASIC MINOR 2 MAJOR SYNERGY
TECHNICAL DATA
RECOMMENDED ACCESSORIES
FEATURES
HELMET CABLE BUNDLES 2-15 m
STEP-SWITCHED MIG/MAG MACHINES
TRANSFORM.VALVE
MIG/MAGSTANDARD
TORCH
MIG/MAGUP-DOWN
TORCH
15
Machine type ALF 250 HD ALF 280 HD ALF 320 HD ALF 400 HD
Mains voltage 3x400V / 50Hz 3x400V / 50Hz 3x400V / 50Hz 3x400V / 50Hz
Mains protection 16A DELAYED 16A DELAYED 25A DELAYED 25A DELAYED
Power factor cos φ 0,85 0,9 0,9 0,9
Welding current range 40A – 250A 40A – 280A 40A – 320A 40A – 400A
Voltage steps 1x10 1x10 1x12 2x10
Welding method MIG MIG MIG MIG
Duty cycle 30% 60% 100% 20% 60% 100% 30% 60% 100%
30% 60% 100%
Welding current 250A 200A 170A 280A 210A 170A 320A 240A 190A
400A 320A 260A
Working voltage 26,5V 24,0V 22,5V 28,0V 24,5V 22,5V 30,0V 26,0V 23,5V
34,0V 30,0V 27,0V
Max.input power 12,1kVA 8,6kVA 6,4kVA 10,2KVA 6,7KVA 5,0KVA 11,8KVA 10,0KVA 5,8KVA
16,7KVA 12,4KVA 9,5KVA
Max.input current 17,5A 12,4A 9,3A 14,7A 9,7A 7,2A 17,1A 14,0A 7,9A
24,2A 18,0A 13,6A
Open-circuit voltage 19,4 - 45,5V 18,5V – 40,5V 18,5V – 43,9V 19,9V – 46,6V
Insulation class H H H H
Protection rating IP 21 IP 21 IP 21 IP 21
Cooling AF AF AF AF
Construction norms EN 60974–1 EN 60974–1 EN 60974–1 EN 60974–1
Dimensions (W x L x H) compact 504 x 870 x 777 mm 504 x 870 x 777 mm 504 x 870 x 777 mm 504 x 870 x 777 mm
Dimensions (W x L x H) separate is not produced anymore 504 x 870 x 1334 mm 504 x 870 x 1334 mm 504 x 870 x 1334 mm
Weight 75kg 85 Kg 93Kg 101Kg
ATA 400 - 600 HD
• MIG/MAG welding machine• All-copper transformers• Compact or with a separate wire feeder.• UP-DOWN torches supported (not in BASIC version)• Powerful external water-cooling unit
FUNCTIONS
MIG/MAG STEP-SWITCHEDVOLTAGE
Cu
ALL-COPPERTRANSFORMER
3x400 V
THREE-PHASE400 VOLTPOWERED
SPOT ANDINTERVALWELDING
SPOT2T
4T2-STROKE4-STROKE
BURNBACK
ADJUSTABLEBURN BACK TIME
PRE-GASAND
POST-GAS
SOFTSTART
ADJUSTABLEINITIAL
WIRE SPEED
ELECTRONICFEEDBACK
REMOTECONTROL
RESET WATERCOOLING
APPLICABLE CONTROL BOARDS
BASIC MINOR 2 MAJOR SYNERGY
TECHNICAL DATA
FEATURES
RECOMMENDED ACCESSORIES
HELMET CABLE BUNDLES 2-15 m
STEP-SWITCHED MIG/MAG MACHINES
TRANSFORM.VALVE
MIG/MAGSTANDARD
TORCH
MIG/MAGUP-DOWN
TORCH
16
version with arm
• Large dot-matrix display.• Secondary inverter.• Synergy/full manual control• Instant access to four currents (start current, two main cur-
rents, end current) - optional.• User interface in national languages.• 10 memory banks, 10 jobs each. Easy job management and
description.• Electrode welding and gauging with excellent characteris-
tics.• Ecological cooling mode.• Remote control on torch.• USB port, easy firmware updates.
TECHNICAL DATA
FEATURES
RECOMMENDED ACCESSORIES
HELMET CABLE BUNDLES 2-15 m
PUSH-PULLFEEDER
REMOTECONTROL
CHOPPERS
TRANSFORM.VALVE
MIG/MAGUP-DOWN
TORCH
A 300 chopperA 400 chopperA 500 chopper
17
Machine type A 300 CHOPPER A 400 CHOPPER A 500 CHOPPERInput voltage 3x400V~ / 50-60Hz 3x400V~ / 50-60Hz 3x400V~ / 50-60HzMains protection 25A DELAYED 25A DELAYED 35A DELAYEDPower factor cos φ 0,95 0,95 0,95Welding method MIG/MAG - MMA MIG/MAG - MMA MIG/MAG - MMADuty cycle 50% 100% 50% 100% 50% 100%Welding current 350A 250A 400A 310A 500A 410AWorking voltage 15,8-31,5V 15,8-31,5V 15,8-34 V 15,8-34 V 15,8-39 V 15,8-39 VOpen circuit voltage 64V 64VInsulation class F F FProtection rating IP 23 IP 23 IP 23Cooling AF AF AFConstruction norms EN 60974–1 EN 60974–1 EN 60974–1 Dimensions (W x L x H) 504 x 870 x 777 mm 640 x 920 x 1406 mm 640 x 920 x 1406 mmWeight (Set) 110 Kg 165 Kg 180 Kg
version with armFUNCTIONS
ANTISTICKTHERM ALPROTECTION
STOP
HOTSTART ARCFORCE
JOBJOB
STOREREMOTE
CONTROLMIG/ MAG
SYNSYNERGY BILEVEL W ATER
COOLING
A+V
AM PEREMETERVOLTMETER
ELECTRONICFEEDBACK
BURNBACK
ADJUSTABLEBURN BACK TIM E
RESET M M A
FUNCTIONS
TECHNICAL DATA
FEATURES
HELMET CABLE BUNDLES 2-15 m
REMOTECONTROL
TRANSFORM.VALVE
RECOMMENDED ACCESSORIES
PULSE
MIG/MAGUP-DOWN
TORCH
18
ATA 350 PULS 2 MOBILaXe 400 double pulseaXe 500 double pulse
ATA 350 PULS 2 MOBIL
double pulse 400/500
• Pulsed synergic welding inverter for MIG/MAG, MMA, TIG LA welding, gauging
• MIG/MAG welding of aluminium, stainless steel, MIG bra-zing of zinc-coated steel and stainless steel.
• Full digital control.• User interface in 7 national languages.• Double pulse (pulse in pulse)• Job store - 10 memory banks, 10 jobs each.• UP-DOWN remote control on torch.• Cooling unit.• Cooling pump and ventilators eco-mode.• Coated electrode welding• on customer´s request ROBO INTERFACE - possibility of
the interface adding for the robot connection
ENGLISH Units ATA 350 PULS 2 MOBIL aXe 400 double pulse aXe 500 double pulseMethod MIG/MAG MIG/MAG MMA TIG MIG/MAG MMA TIGMains voltage V/Hz 3x400/50-60 3x400/50-60 3x400/50-60Mains protection A 16 deayed 32 32Max. input power I1 A 21,8 26,7 28 22,5 31,7 37,8 33Max. effective current I1eff A 26,7 28 22,5 26,7 28 23,3Welding current range A/V 25/15,2 - 320/30 20/15V - 500/39 5/20,2V - 500/40 5/10,2 - 500/30,3 20/15V - 500/39 5/20,2V - 500/40 5/10,2 - 500/30,3
Open-circuit voltage U20 V 81 83 83Welding current (DC=100%) I2 /U2 A/V 250/15,5 400/34 400/36,4 400/26 400/34 400/36,4 400/26Welding current (DC=60%) I2/U2 A/V 270/18,2 450/36,5 450/38 460/28,4 450/36,5 450/38 460/28,4Welding current (DC=x%) I2/U2 A/V 35%=320/21,8 500/39 500/40 500/30,3 500/39 500/40 500/30,3Power factor cosφ 0,99 0,99 0,99Insulation class F IP 23 IP 23Protection IP 23 H HStandards EN 60974-1 EN 60974-1 EN 60974-1Dimensions (w x l x h) generator mm 340 x 745 x 498 568x853x1048 568x853x1048Weight - compact/generator kg 35 115/100 105/100
Wire speed m/min 0,1-25 1 - 20 1 - 20
Spool diameter mm 300 300 300Spool weight kg 18 18 18Dimensions (w x l x h) feeder mm 263x690x498 263x690x498Weight - feeder kg 25 25Cooling power (Q=1l/min) kW 0,77 0,77Total liquid content l 4 4 4Max. pressure Bar 3,5 3,5 3,5Max. flow l/min 9 8 8
CUTMASTER 10, 12, 20 CUTMASTER 25, 35, 40APC-IN 35, 45APC 30-75
TECHNICAL DATA
CUTMASTER, APC-IN 35 a 45• IGBT technology• Contactless ignition• Continuous voltage regulation
APC 30-75• Voltage regulation in steps• HF ignition
FEATURES
PLASMA
FILTER
RECOMMENDED ACCESSORIES
APC 30-75
APC 35
CUTMASTER 12 - 40CUTMASTER 10
Machine type APC-IN 35 CUT APC-IN 45 CUT APC 30-75 CUT
Input voltage 1x230V~ / 50-60Hz 3x400V~ / 50-60Hz 3x400V~ / 50-60Hz
Mains protection 25A DELAYED 10A DELAYED 25A DELAYED
Effectivity 0,85 0,85 0,8
Duty cycle 60% 100% 60% 100% 60% 100%
Max. input current 24A 19A 11,5 A 9A 23,0A
Max. effective current 5,5KVA 4,4KVA 7,9KVA 6,2KVA -
Cutting current 35A 27A 45A 35A 45A 30A
Cutting voltage 94V 91V 98V 94V 100,0V 92,0V
Open circuit voltage 14V 14V 275V
Air pressure 5bar 5bar 0,55MPa
Material thickness 10 – 12mm 12 – 15mm 25 mm
Insulation class H H F
Protection rating IP 23 IP 23 IP 21
Cooling AF AF AF
Construction norms EN 60974–1 EN 60974–1 EN 60974–1
Dimensions (W x L x H) 160 x 400 x 260mm 160 x 400 x 260mm 400 x 750 x 650 mm
Weight 9,5 Kg + 1,2 Kg torch 9,5 Kg + 1,2 Kg torch 67 Kg
Model Cutmaster 10 Cutmaster 12 Cutmaster 20 Cutmaster 25 Cutmaster 35 Cutmaster 40Cut Capacity genuine (mm) 10 12 20 25 35 40Cut Capacity max (mm) 12 15 25 30 40 50Severance (mm) 16 20 32 38 45 55Output Corrent Amps 30 40 60 80 100 120
Input Power 230V/14A 1 Ph 50/60 Hz
400V/8A 3Ph 50/60Hz 230V/400V 15A/8A
3 Ph 50/60Hz
400V/16A 3Ph 50/60Hz 230V/400V 24A/16A
3 Ph 50/60Hz
400V/20A 3Ph 50/60Hz 230V/400V 39A/20A
3 Ph 50/60Hz
400V/27A 3Ph 50/60Hz 230V/400V 45A/27A
3 Ph 50/60Hz
400V/32A 3Ph 50/60Hz 230V/400V 56A/32A
3 Ph 50/60Hz
Duty Cycle 35% @ 30A 60% @ 40A 40% @ 60A 40% @ 80A 80% @ 100A 80% @ 120ADimensions (mm) 381 x 305 x 610 416 x 273 x 572 383 x 305 x 610 381 x 305 x 610 381 x 305 x 762 381 x 305 x 762Weight (kg) 17,7 19,5 19,5 19,5 28,1 28,1Ship Weight (kg) 24,5 26,3 26,3 26,3 34,9 34,9Torch SL60 Hand SL60 Hand SL60 Hand SL60 Hand SL100 Hand SL100 HandLead Length (m) 6,1 Manual 6,1 / 15,2 Manual 6,1 / 15,2 Manual 6,1 / 15,2 Manual 6,1 / 15,2 Manual 6,1 / 15,2 ManualGas Air Air Air Air Air Air
Suitable Materials aluminium, Stainless Steel, Mild Steel
aluminium, Stainless Steel, Mild Steel
aluminium, Stainless Steel, Mild Steel
aluminium, Stainless Steel, Mild Steel
aluminium, Stainless Steel, Mild Steel
aluminium, Stainless Steel, Mild Steel
Typical ApplicationsHVAC, Home Shop
Plumbing, Auto Body Repair
Construction, Maintenance / Repair, Fabrication
Construction, Maintenance / Repair,
Fabrication
Heavy Fabrication, Manufacturing
Heavy Fabrication, Manufacturing
Heavy Fabrication, Manufacturing
GUIDE KITS
19
ENG-CAT-08
ALFA IN a.s., Nová Ves 74, 675 21 OkříškyCzech Republic, www.alfain.eu, [email protected].: +420 568 840 009, fax.: +420 568 840 966
© A
LFA
IN a
.s.,
text
and
imag
es c
orre
spon
d to
the
situ
atio
n on
the
day
of p
rint.
Rig
ht o
f cha
nge
rese
rved
.