Catalog LV 10.1 · 2012 English - IL DIVERSO KFT Sentron/Sentron 13.pdf13/13 PAC3200 block library for SIMATIC WinCC Configuring, visualizing and controlling with SENTRON 13/14 General

13

Siemens LV 10.1 · 2012

13

Planning the power distribution system with SIMARIS

13/2 General data13/3 SIMARIS design13/4 SIMARIS project13/5 SIMARIS curves

ALPHA SELECT engineering and project management software

13/6 General data

Configuring, visualizing and controlling with SIMATIC

13/8 General data13/9 SIMATIC powerrate13/11 SIMATIC PCS 7 Library PAC320013/12 3WL/3VL block library

for SIMATIC PCS 713/13 PAC3200 block library

for SIMATIC WinCC

Configuring, visualizing and controlling with SENTRON

13/14 General data13/15 powermanager13/18 powerconfig

Technical informationcan be found atwww.siemens.com/lowvoltage/support

under Product List:- Technical Specifications

under Entry List:- Updates- Download- FAQ- Manuals- Characteristics- Certificates

and atwww.siemens.com/lowvoltage/configurators

- Configurators

Software

LV10-1_13_EN.book Seite 1 Mittwoch, 18. Januar 2012 5:02 17

© Siemens AG 2012

Software Planning the Power Distribution System with SIMARIS

General data

13/2 Siemens LV 10.1 · 2012

13

■ Overview

SIMARIS design

Software tool for quick and effective network calculations and the dimensioning of power distribution for non-residential and industrial buildings from medium voltage supply to the load:• Dimensioning of electrical networks on the basis of real prod-

ucts according to acknowledged rules of technology and applicable standards (VDE, IEC)

• Automatic selection of the appropriate components from the integrated product database

• Possibility of storing frequently used modules in the favorites library

• High planning reliability combined with flexibility in the plan-ning and realization process

• Possibility of automatic selectivity evaluation with the profes-sional version: in addition to the time/current characteristic curve and the respective envelope curves, selectivity limits are automatically displayed

SIMARIS project

Software tool for fast calculation of space requirements and electrical power distribution budgets for non-residential and industrial buildings, and for preparing specifications:• Automatic selection and placement of the appropriate sys-

tems based on the parameters entered• Fast overview of space requirements and budget• Thorough planning from the medium voltage supply to the

distribution board• Easy adaptation of project planning possible not only at the

time of implementation, but also in the event of changes in use or expansions

• Storing of planned systems in the favorites library for further use in similar projects

• Automatic generation of specifications for the planned sys-tems

SIMARIS curves

Software tool for visualizing and evaluating characteristic curves of low-voltage protection equipment and fuses (IEC), including the possibility of simulating instrument settings:• Visualization of tripping characteristics and let-through cur-

rent and let-through power characteristics• Device selection via order number or by entering known tech-

nical specifications using the selection aid• Storing of frequently used devices as favorites• Saving of several characteristic curves including selected

settings as a complete project

More information about SIMARIS

You can find more information and downloads on the Internet at:

www.siemens.com/simaris


© Siemens AG 2012


SIMARIS design

13/3Siemens LV 10.1 · 2012

13

■ Overview

SIMARIS design is a software tool for quick, effective network calculations and dimensioning of electrical power distribution for non-residential and industrial buildings.

As early as the planning phase, the complete circuit required for the project to be handled can be structured and dimensioned on the basis of real products. The network structure is first assem-bled from the stored modules for feeder units, couplings, distri-bution boards and branch circuits. It is also possible to re-use stored favorites, such as those developed in previous, similar projects. Exactly the right components and distribution systems for the case in question are then selected automatically from the product database stored in SIMARIS design, based on the pa-rameters and technical specifications selected specifically for the project. This avoids any additional costs which might be generated by uncoordinated systems in the implementation phase before they are incurred.

Every time an electrical power distribution system is configured, changes and the adaptations they require occur in both the planning and the implementation phases. SIMARIS design makes it easy to incorporate such changes into the supply con-cept and automatically check its reliability with regard to the ac-knowledged rules of technology and the standards currently ap-plicable.

Even an analysis of selectivity, which is essential for safety power supply elements for example, can be carried out easily with SIMARIS design professional, a program version with additional useful functions which is available for a fee.

The wide range of output options allow the project structure and the data gathered to be documented precisely in each phase of the project.

■ Benefits

• Reduction in workloads for projects• Dimensioning of electrical networks on the basis of real

products according to acknowledged rules of technology and applicable standards (VDE, IEC)

• Automatic selection of the appropriate components from the integrated product database, from the medium voltage supply to connection of loads, so no detailed knowledge of products and systems is required

• Calculation of short-circuit current, load flow, voltage drop and energy balance

• Provision for the necessary personal, short-circuit and over-load protection

• Possibility of providing for the necessary lightning and over-voltage protection

• Displaying and dimensioning of the cables and busbar trunk-ing systems for power conveyance and distribution

• High planning reliability combined with flexibility in the plan-ning and realization process

• Changes can be tracked by means of a change index• Easy adaptation in the event of changes in use or expansion• Possibility of storing frequently used modules in the favorites

library• Output of the network plan developed, together with detailed

parts and data lists• Country-specific product ranges taken into account• Comprehensive documentation of planning results with simple

data transfer (Office, CAD etc.)

■ Application

SIMARIS design is suitable for network calculations and dimen-sioning of electric power distribution systems in all non-residen-tial and industrial buildings. Whether you are planning a shop-ping mall, a hospital or a production building, with SIMARIS design it is possible to considerably reduce the amount of work required for the overall planning of power distribution systems and hence the time spent on selecting and dimensioning the necessary equipment.

■ More information


www.siemens.com/simarisdesign


© Siemens AG 2012


SIMARIS project

13/4 Siemens LV 10.1 · 2012

13

■ Overview

SIMARIS project is a software tool for fast calculation of space requirements and electrical power distribution budgets for non-residential and industrial buildings, and for generating specifica-tions automatically.The following is determined in SIMARIS project based on the pre-defined project structure and the basic technical specifica-tions selected:• For medium-voltage switchboards: selection of the required

system and the required fields, then presentation of a front view with dimensions.

• For transformers: selection of the required system and then the required quantity. Selected transformers are presented as a parts list.

• For low-voltage switchboards and distribution boards: selec-tion of the required protection devices and switching devices per system. The most suitable distribution system is deter-mined automatically based on the list of distribution devices thus created, is equipped with the devices and presented graphically in an automatically generated front view including dimensions.

• For busbar trunking systems: selection of the required system, then specification of the length and selection of the addition-ally required components, e. g. infeeds, junction units and tap-off units. All the resulting components are listed in a parts list.

Detailed information about Siemens units or their order numbers are not needed because SIMARIS project makes the selection automatically on the basis of the parameters entered. For each item of switchboard or each distribution, SIMARIS project takes the wiring, control and measurement etc. into account.A system plan drawn up professionally in SIMARIS design can also be imported into SIMARIS project, which means that select-ing devices becomes redundant and SIMARIS builds up the project structure automatically. Convenient output variants are available to document the re-sults, including the automatic generation of specifications for the planned systems.Typical versions of a system planned with SIMARIS project can be saved and imported continually into new projects from the fa-vorites library. Automatically created systems can also be sub-sequently optimized or changed. This is particularly relevant if planning becomes more detailed and the budget needs to be reinforced as a result.For detailed calculation of costs - on an up-to-date and regional basis - and for more project support please contact your Sie-mens representative.

■ Benefits

• Intuitive and easy to operate• Automatic selection and placement of matching distribution

systems• Fast calculation of space requirements and budget for electri-

cal power distribution systems• Seamless planning, from the medium-voltage switchboard

through transformers, low-voltage switchboards and busbar trunking systems to the distribution boards

• Easy adaptation of planning as requirements become more concrete in the course of a project, and also in the event of changes in use or expansion of the systems

• Saving planned systems for similar projects individually in the favorites library and importing them from there into new projects

• Convenient output types for documentation purposes, such as graphic views, lists and specifications

• Importing of a project drawn up in SIMARIS design 6.0 profes-sional

■ Application

SIMARIS project is suitable for quickly establishing space re-quirements and budget, and for preparing specifications for electrical power distribution systems in non-residential and in-dustrial buildings. From shopping centers to hospitals and pro-duction buildings – with SIMARIS project it is possible to consid-erably reduce the amount of work required for the overall planning of power distribution systems and hence the time spent on selecting and dimensioning the necessary equipment.


You can find more information and downloads on the Internet at:www.siemens.com/simarisproject


© Siemens AG 2012


SIMARIS curves

13/5Siemens LV 10.1 · 2012

13

■ Overview

SIMARIS curves is a software tool for visualizing and evaluating characteristic curves of Siemens low-voltage protection equip-ment and fuses (IEC) quickly and easily, including the possibility of simulating instrument settings.

With SIMARIS curves it is possible to simulate parameter set-tings on protective devices. The respective characteristic curve is selected by direct entry of the Siemens order number, or with the aid of a user-friendly selection tool by entering known tech-nical specifications. Individual products with default attributes can be stored as favorites and called up again.

In addition to simply displaying tripping characteristics with tol-erance ranges, it is also possible to simulate parameter settings for the subsequent setting of the devices. In addition, the asso-ciated let-through current and let-through power characteristics can be displayed. A printout summary documents the charac-teristic curves selected and each of their settings.

■ Benefits

• Visualization and evaluation of tripping characteristics of low-voltage protection equipment and fuses (IEC), including the possibility of simulating instrument settings

• Visualization of let-through current and let-through power characteristics

• Clear product selection using order numbers or with the aid of technical specifications in the selection tool

• Saving of selected devices as favorites• Saving of several characteristic curves including settings as

complete project• Country-specific product ranges taken into account• User-friendly documentation.

■ Application

SIMARIS curves is suitable for displaying tripping characteris-tics, let-through current and let-through power characteristics of Siemens low-voltage controls and fuses.

From shopping malls through hospitals to production shops – SIMARIS curves lets you call up the devices required and their characteristic curves quickly and documents them accordingly.



www.siemens.com/simariscurves


© Siemens AG 2012

SoftwareALPHA SELECT Engineering and Project Management Software

General data

13/6 Siemens LV 10.1 · 2012

13

■ Overview

ALPHA SELECT software assists installation engineers, control cabinet engineers, electrical wholesalers and planners in the plan-ning and configuration of distribution boards and meter cabinets. Easy-to-use, intuitive functions guide you step-by-step through the entire project, from planning to installation. ALPHA SELECT pre-vents configuration errors by means of collision checks and config-uration rules stored in the program.

ALPHA SELECT comprises: • ALPHA SIMBOX small distribution boards • ALPHA 400-ZS meter cabinets • ALPHA distribution boards • ALPHA 8HP molded-plastic distribution systems • ALPHA BOX IEC wall-mounted distribution boards

In addition, BETA low-voltage circuit protection products, GAMMA instabus products (for building management) and many other items from the Siemens Industry product selection are avail-able in electronic catalogs (EGH selection catalog and CA 01).

More information

For further information, please visit our Web site atwww.siemens.com/alpha-selectSupport for planning and configuration is available from:www.siemens.com/lowvoltage/technical-support Tel.:+49 (911) 895-7222

Calculation of power loss

Selection of the ALPHA distribution system

Distribution board equipment, front view

Parts list with calculation

Illustration of the device structure as single-pole circuit diagram


© Siemens AG 2012

13

SoftwareALPHA SELECT Engineering and Project Management Software

General data

13/7Siemens LV 10.1 · 2012

Start with the selection of a suitable distribution system and dis-tribution board by selecting the required degree of protection, safety class and dimensions. You can then just drag & drop the required assembly kits, devices and accessories of your choice. Essential accessories are determined automatically. When se-lecting the devices, customer specifications can be prepared using either item numbers or in accordance with the electrical structure. In case 2 a graphical representation in the form of a 1-pole circuit diagram has been available since the launch of Version 6.0.

The graphic representation of the structure enables individual levels, such as doors, covers, equipment racks or devices, to be visualized, rendered transparent and hidden in order to provide users with a constant overview of already configured compo-nents.

There is also an integrated option for power loss calculation which enables comparison of the calculated power loss values of the devices installed in the distribution board with the thermal rating of the distribution board, giving due consideration to the point of installation and the permissible overtemperature (related to 35 °C ambient temperature).

Frequently required components can be saved as favorites for integration in other projects at any time.

Used in conjunction with existing calculation aids, users are able to tailor parts lists, assembly drawings and assembly structures to individual requirements and output as both a hard copy and in electronic form.

In addition to planning and calculation in the program, users are also able to produce parts lists and graphic documentation to accompany customer quotations or for ordering the required components.

The workshop version, which comprises a structured list of the distribution boards and the respectively installed parts and graphical representation of the different user-defined layers, directly supports the building of distribution boards configured using ALPHA SELECT.

www.siemens.com/alpha-select

■ Benefits

• Cabinet selection: simple selection of cabinet system, degree of protection, safety class and dimensions

• Selection of equipment using technical specifications• Alternative structuring of the devices according to

- Electrical structure and graphic output as 1-pole circuit diagram

- Item numbers in the customer specifications• Positioning of assembly kits and devices using drag & drop• Automatic determination of key accessories• Numbering of assembly kits in the assembly drawing• Automatic issue of item codes for devices• Calculation of power loss• Differentiated calculation options, including allowance made

for assembly work• Listing in the assembly structure of devices placed in the as-

sembly kits, including numbering of the assembly kits and the item codes of the devices

• Easy drawing up of quotations for projects: Clearly arranged output selection for parts lists, assembly drawing and assem-bly structure

• Clearly arranged calculation aids. Calculations for individual items and assembly, for material surcharges, shipment costs, discounts and miscellaneous extras are easy to perform in the parts list. Standard discounts for each price group can also be saved in the memory.

• Option for quotations with individual company logo• Update over the web with quick download times• Manual available as a download

■ Application

System requirements• Processor: from 1 GHz• Main memory: minimum 512 MB• Operating system: Windows 7/VISTA/XP/2000• Free hard disk space: 100 ... 500 MB

(depending on the number of modules installed)• Display resolution: minimum 1024×768 with 16-bit color

intensity


Support for planning and configuration is available from:

www.siemens.com/lowvoltage/technical-support

and by calling: +49 (911) 895-7222


© Siemens AG 2012

SoftwareConfiguring, Visualizing and Controlling with SIMATIC

General data

13/8 Siemens LV 10.1 · 2012

13

■ Overview

SIMATIC powerrate

SIMATIC WinCC powerrate is an add-on to PCS 7 and WinCC which throws light on power consumption from the infeed to the load:• Identification of power-intensive consumer devices and pro-

cesses in order to introduce measures for improving power efficiency

• Comparison of consumption profiles for greater efficiency of process design

• Optimizing the company according to energy parameters based on an assessment of consumption and costs

• Complying with the contractually agreed power limit, thus preventing higher power supply costs or penalty payments.

SIMATIC PCS 7 Library PAC3200, PAC3200 block library for SIMATIC WinCC

The function block libraries enable the seamless integration of the 7KM PAC3200 power monitoring device into the PSC 7 pro-cess world or into WinCC.

3WL/3VL block library for SIMATIC PCS 7

The 3WL/3VL block library enables the seamless integration of the 3WL/3VL circuit breaker in the PSC 7 process world.


© Siemens AG 2012

13


SIMATIC powerrate

13/9Siemens LV 10.1 · 2012

■ Overview

SIMATIC powerrate is an add-on to PCS 7 and WinCC which throws light on power consumption from the infeed to the load. Power data are continuously collected, archived and processed further. With an exact knowledge of the consumption profile, it is possible to identify savings potential, optimize your power sup-ply conditions and hence, lower your power costs. Monitoring the contractually agreed power limit helps on the one hand to prevent unnecessarily high power prices or penalties and on the other hand to make full use of the fixed power limit.

Batch-related consumption recording enables the exact record-ing and evaluation of power consumption per batch.

The integration of switches through digital inputs/outputs en-ables the monitoring or indication of switch status and, with suit-able authorization, remote switching. If connection is through DPV1 or PROFINET selected measured values and messages from the 7KM PAC3200 and PAC4200 power monitoring devices can be displayed online.

Data recorded and archived by SIMATIC powerrate can be exported to Excel and presented in various reports.

Support for the WinCC Web Navigator means that the SIMATIC powerrate functionality is also available over the web.

Full integration in PCS 7 and WinCC makes it easy to use stan-dard interfaces or standard functionalities from PCS 7 or WinCC.

Components

SIMATIC powerrate is made up of the following components:• Function blocks for the acquisition and processing of power

data• Faceplates for the presentation and processing of power data• Components for implementing load management (calculating

trends, monitoring limits, enabling/disabling loads)• Function blocks for batch-related consumption recording• Function blocks for the integration of measuring devices and

switches• Other components, for example, for time synchronization,

data buffering or data exchange with archives• Faceplates for presenting results and for entering values

(e. g. for configuration or from manual measured values)• Excel-based reports for allocating power data to cost centers,

for batch-related evaluation and for determining and present-ing the duration curve

• Exporting data to Excel

System requirements

The SIMATIC powerrate library is released for the following PCS 7 versions:• SIMATIC PCS 7 V7.1 SP2• SIMATIC PCS 7 V7.1 SP1• SIMATIC PCS 7 V7.1

The library is released for the following WinCC version with the associated STEP 7 versions:• SIMATIC WinCC V7.0 SP2


© Siemens AG 2012


SIMATIC powerrate

13/10 Siemens LV 10.1 · 2012

13

* You can order this quantity or a multiple thereof.

■ Benefits

• Identification of power-intensive consumer devices and pro-cesses in order to introduce measures for improving power efficiency

• Comparison of consumption profiles for greater efficiency of process design

• Optimizing the company according to energy parameters based on an assessment of consumption and costs

• Complying with the contractually agreed power limit, thus pre-venting higher power supply costs or penalty payments

• Integration of the 7KM PAC3200 and PAC4200 power monitor-ing devices with a quick overview of selected measured val-ues and signals

• Integration of switches with an overview of switch status and switching possibilities

• Exact assignment and comparison of the consumption data of certain work processes through batch-related consumption recording

■ Application

SIMATIC powerrate is used in all areas in which PCS 7 or WinCC is used and energy efficiency considerations play a major role. Full integration into PCS 7 or WinCC means that there is no need for a special system environment. Predefined modules and sym-bols give you the assurance of building on tested and certified product components, with interfaces which enable customized expandability.

■ Selection and ordering data

1) For operation on one WinCC / PCS 7 OS (single workstation system or server) and any number of automation systems (AS). A license is required for each WinCC / PCS 7 single workstation system or server if using additional WinCC single workstation systems or servers.


Information about using SIMATIC powerrate is available fromSiemens AG, Technical SupportTel.: +49 (911) 895-7222Fax.: +49 (911) 895-7223 www.siemens.com/automation/support-request

You can find further general information on the Internet at: www.siemens.com/lowvoltage/energymanagement

Version DT Order No. Priceper PU

PU(UNIT,

SET, M)

PS*/P. unit

PG Weightper PU

approx.

kg

SIMATIC powerrate V 4.0Trial license

Limited 30 day Engineering-/Runtime license

B 6AV6 372-1DE04-0AX7 1 1 unit 276 0.250

Unlimited Engineering-and AS-Runtime license1)

Also includes:

• License for user/archive

• PAC3200 block library for PCS7 and WinCC

• PAC3200 block library, 3WL/3VL for PCS 7

B 6AV6 372-1DE04-0AX0 1 1 unit 276 0.250

SIMATIC powerrate V4.0 upgrade from V3.0 to V 4.0Unlimited Engineering-and AS-Runtime license1)

Also includes:

• License for user/archive

• PAC3200 block library for PCS7 and WinCC

• PAC3200 block library, 3WL/3VL for PCS 7

B 6AV6 372-1DE04-0AX4 1 1 unit 276 0.250


© Siemens AG 2012

13


SIMATIC PCS 7 Library PAC3200

13/11Siemens LV 10.1 · 2012* You can order this quantity or a multiple thereof.

■ Overview

The PCS 7 block library - SIMATIC PCS 7 Library PAC3200 - for the 7KM PAC3200 power monitoring device enables the seam-less integration of the power monitoring device into the PCS 7 process world.

It comprises one driver block, one diagnostics block and the faceplates. The blocks in the SIMATIC S7 supply energy data to the faceplates in the user interface of the process control sys-tem, generate signals and guarantee connection to the mainte-nance system of PCS 7.

Faceplates

Faceplates serve as a user interface for operating and monitor-ing and enable technologically important values and functions of the 7KM PAC3200 power monitoring device to be displayed and performed as a PCS 7 object.

Both between the faceplates and the function blocks and be-tween the function blocks and the 7KM PAC3200 power monitor-ing device, there are bidirectional communication connections on the system side that support the display of values in the face-plates and the forwarding of input data to the device.

This transforms the 7KM PAC3200 power monitoring device into an integral component of PCS 7.

The operating systems supported are the same as those for SIMATIC PCS 7.

■ Benefits

• Full integration of 7KM PAC3200 power monitoring device in the PCS 7 process control system through PROFIBUS DPV1 using a certified PCS 7 add-on module

• Reading out and displaying device data• Inputting limit values for monitoring through the driver block• Resetting values on the device (min/max values)

■ Application

SIMATIC PCS 7 Library PAC3200 is used in all areas in which PCS 7 is used. Full integration in PCS 7 means that there is no need for a special system environment. Predefined modules and symbols give you the assurance of building on tested and certi-fied product components.

For challenging measurements the 7KM PAC4200 can also be used in the functional scope of the PAC3200.

In addition to the cyclic connection, there is also an acyclic con-nection for pure visualization tasks. The process image of the SIMATIC CPUs can be used more efficiently with the acyclic connection.


SIMATIC PCS 7 V 6.1 SP3, PCS 7 V 7.0 SP3 and PCS 7 V7.1 without and with SP1/SP2/SP3

1) For currently-supported SIMATIC PCS 7 versions see http://support.automation.siemens.com


PU(UNIT,

SET, M)

PS*/P. unit

PG Weightper PU

approx.

kg

SIMATIC PCS 7 Library PAC32001) Engineering license

• For operation on one PCS 7 OS (single workstation system or server) and an automation system (AS).

• When using additional PCS 7 OS devices, you need an engineering license for each PCS 7 OS.

B 3ZS2 781-1CC11-0YG0 1 1 unit 133 0.250

Runtime license

• For operation on an additional AS

B 3ZS2 781-1CC10-6YH0 1 1 unit 133 0.250


© Siemens AG 2012


3WL/3VL block library for SIMATIC PCS 7

13/12 Siemens LV 10.1 · 2012* You can order this quantity or a multiple thereof.

13

■ Overview

The PCS 7 3WL/3VL block library enables the simple and seam-less integration of the 3WL/3VL circuit breaker into the PSC 7 process world.

It comprises one driver block, one diagnostics block and the faceplates. The blocks in the SIMATIC S7 supply current, power and energy data to the faceplates in the user interface of the pro-cess control system, generate signals and guarantee connec-tion to the maintenance system of PCS 7.

Faceplates

Faceplates serve as a user interface for operating and monitor-ing and make it easy for the circuit breaker to be displayed and operated as a PCS 7 object.

The 3WL/3VL block library for SIMATIC PCS 7 provides for con-tinual plant transparency. Critical plant states are recognized quickly and costs owing to outages avoided. System availability is permanently increased.

This transforms the circuit breaker into an integral component of PCS 7.

The operating systems supported are the same as those for the SIMATIC PCS 7.

■ Benefits

• Full integration of the 3WL/3VL circuit breaker into the PCS 7 process control system through PROFIBUS DPV1 using a cer-tified PCS 7 add-on module

• Remote switching and monitoring• Reading out of maintenance information• Automatic information in case of overload, short-circuit and

faults• Reading out and displaying device data• Limit monitoring through the driver block• Resetting values on the device (min/max values)

■ Application

The 3WL/3VL function block for SIMATIC PCS 7 is used in all areas in which PCS 7 is used. Full integration in PCS 7 means that there is no need for a special system environment. Predefined modules and symbols give you the assurance of building on tested and certified product components.


SIMATIC PCS 7 V 6.1 SP3 and PCS 7 V 7.1 without and with SP1/SP2/SP3

1) For currently-supported SIMATIC PCS 7 versions see http://support.automation.siemens.com


PU(UNIT,

SET, M)

PS*/P. unit

PG Weightper PU

approx.

kg

3WL/3VL block library for SIMATIC PCS 71)

Engineering license

• For operation on one PCS 7 OS (single workstation system or server) and an automation system (AS).

• When using additional PCS 7 OS devices, you need an engineering license for each PCS 7 OS.

B 3ZS2 782-1CC10-0YG0 1 1 unit 133 0.250

Runtime license


B 3ZS2 782-1CC10-6YH0 1 1 unit 133 0.250


© Siemens AG 2012

13


PAC3200 block library for SIMATIC WinCC


■ Overview

The PAC3200 block library for SIMATIC WinCC enables the seamless integration of the 7KM PAC3200 power monitoring device into WinCC.

It comprises one driver block, one diagnostics block and the faceplates. The blocks in the SIMATIC S7 supply energy data to the faceplates in the user interface of WinCC, generate signals and guarantee connection to the maintenance system of WinCC.

Faceplates

Faceplates serve as a user interface for operating and monitor-ing and enable technologically important values and functions of the 7KM PAC3200 power monitoring device to be displayed and performed in WinCC.

Both between the faceplates and the function blocks and be-tween the function blocks and the 7KM PAC3200 power monitor-ing device, there are bidirectional communication connections on the system side that support the display of values in the face-plates and the forwarding of input data to the device.

This makes the 7KM PAC3200 power monitoring device an inte-gral component of WinCC.

System requirements

The PAC3200 block library for SIMATIC WinCC is released for • WinCC V 7.0 • WinCC V 7.0 SP2

WinCC options AS-OS Engineering and Basic Process Control must be installed. The block library is available for S7-300, S7-400 and WiNAC RTX.

At least one S7 CPU317-2DP is required for use in the S7-300 area. At least one S7 CPU414-2 is required for use in the S7-400 area.

Supported operating systems are the same as for SIMATIC WinCC.

■ Benefits

• Full integration of the 7KM PAC3200 power monitoring device in SIMATIC WinCC through PROFIBUS DPV1. The block li-brary is a certified WinCC add-on module.

• Reading out and displaying device data• Inputting limit values for monitoring through the driver block• Resetting values on the device (min/max values)

■ Application

The PAC3200 block library for SIMATIC WinCC is used in all areas in which WinCC is used. Predefined function blocks and symbols give you the assurance of building on tested and certi-fied product components.

For challenging measurements the 7KM PAC4200 can also be used in the functional scope of the PAC3200.

In addition to the cyclic connection, there is also an acyclic con-nection for pure visualization tasks. The process image of the SIMATIC CPUs can be used more efficiently with the acyclic connection.


SIMATIC WinCC V 7.0 and WinCC V 7.0 SP 2

1) For currently-supported SIMATIC WinCC versions see http://support.automation.siemens.com


PU(UNIT,

SET, M)

PS*/P. unit

PG Weightper PU

approx.

kg

PAC3200 block library for SIMATIC WinCC1)

Engineering license

• For operation on one WinCC OS (single workstation system or server) and an automation system (AS).

• When using additional WinCC OS devices, you need an engineering license for each WinCC OS.

B 3ZS2 791-1CC11-0YG0 1 1 unit 133 0.250

Runtime license


B 3ZS2 791-1CC10-6YH0 1 1 unit 133 0.250


© Siemens AG 2012

SoftwareConfiguring, Visualizing and Controlling with SENTRON

General data

13/14 Siemens LV 10.1 · 2012

13

■ Overview

powermanager

Power management software for the SENTRON-based power management system with the following main points:• to identify savings potential • to reduce power costs• to ensure power availability

powerconfig

Commissioning and service tool for communication-capable SENTRON measuring devices and circuit breakers with follow-ing main points:• Makes the parameterization of the devices easier, which

gives rise to a considerable time saving, particularly when several devices have to be set up.

• With powerconfig the 3WL and 3VL circuit breakers and the 7KM PAC3100 / PAC3200 / PAC4200 power monitoring de-vices can be parameterized, documented, operated and monitored using various communication interfaces.


© Siemens AG 2012


powermanager

13/15Siemens LV 10.1 · 2012

13

■ Overview

Components of the PC-based power management system

Power management system with the SENTRON product family

The SENTRON product family offers the user not only power management software in the form of SENTRON powermanager but also the corresponding hardware in the form of 7KM PAC measuring devices and 3WL/3VL circuit breakers for the realiza-tion of a complete power management system.

The components are optimally coordinated with each other. For example, special drivers for the SENTRON devices are inte-grated in the powermanager software so that on the one hand the power data acquisition can take place without any great con-figuration effort and, on the other hand, the most important mea-sured values or states are indicated by predefined displays.

This reduces the engineering work for the customer and gives the user the assurance of knowing that the device functions are optimally supported in the software.

Features of powermanager

The power management software powermanager is at the heart of the PC-based power management system and• is an independent power management software.• can be operated using a PC and measuring devices with

Ethernet connection.• is expandable from the simple standard application to

a fully flexible customer solution.• is fully scalable with regard to the number of devices and to

the software's functions.• ensures the optimum integration of measuring devices from

the 7KM PAC range, 3WL/3VL circuit breakers and other devices.

User interface of powermanager

Standard package and options packs

Even in the standard package powermanager covers the normal requirements. With this package the user receives easy-to-oper-ate power management software which enables the data de-tected by the measuring devices to be read out, presented, archived and processed in basic evaluations.

With the "Expert" option pack the user receives full flexibility for the presentation of graphic interfaces (e. g. single line presenta-tions) in order to integrate his own images and devices.

With the "Web" option pack, data/images can be presented using a web browser.

With the "Distributed Systems" option pack it is possible to con-nect several distributed powermanager servers to form one complete system. This means, firstly, that distributed sites can be managed from a single location and, secondly, that the num-ber of usable devices can thus be increased.

The system is, of course, expandable to the extent that it allows the customer to begin with the basic functionality of the power-manager and add the "Expert" option pack at a later date. Exist-ing data and configurations can still be used after upgrading.

■ Benefits

• Transparency of power flows• Exact knowledge of the consumption profile• Increase of power efficiency• Optimization of power supply contracts• Compliance with contractual terms• Assignment of power costs to cost centers• Optimization of plant maintenance• Identification of critical plant conditions


© Siemens AG 2012


powermanager

13/16 Siemens LV 10.1 · 2012

13

■ Application

Applications

The product offers a standard power management solution which provides the user with the following basic functionality:• Collection of measured quantities from the devices• Presentation of the measured quantities from the devices in

table form in a predefined standard view for 7KM PAC3100, PAC3200 and PAC4200 power monitoring devices and 3WL/3VL circuit breakers

• Free presentation of measured quantities possible, including from non-Siemens devices using generic Modbus drivers

• Archiving of measured quantities

• Monitoring of status and limits, with generation of correspond-ing signals

• Reserve curve display for visualizing the achieved data and online data

• Cost center reports based on predefined rates and the archived consumption data

• OPC server• Configuration of the system including user management

This standard solution is designed with cost-efficiency and sim-ple system start-up in mind.

System configuration• Integration of measuring devices by means of predefined de-

vice templates for the 7KM PAC family and the 3WL/3VL circuit breakers

• Easy integration of existing modbus-capable detecting devices

• Communication through Standard Ethernet• Integration of devices with RS485 interface (ModbusRTU)

through Modbus gateway, e. g. the 7KM PAC4200 can be used as gateway

Industries

Energy efficiency thanks to power management with consistent monitoring and the resulting optimization measures is important for all industries, e. g. in the manufacturing industry, in non-resi-dential buildings, in the field of services, and in infrastructure projects. This has a particular impact on competitiveness, par-ticularly in view of rising energy prices.

System requirements

Hardware requirements• Processor: Intel Pentium IV 2.8 GHz (or higher)• RAM: at least 2 GB• Hard disk: at least 1 GB free• Graphics: VGA with at least 1280 x 1024 pixels and

16-bit color intensity

Supported operating systems• Windows Vista: Business, Ultimate; SP1• Windows XP: XP with SP2/SP3• Windows 2003: Server 2003 Server (32-bit)

Supported Excel versions (required for reporting)

Excel 2000, Excel XP, Excel 2003, Excel 2007

System configuration

Operation & monitoringWindows or web clients

Data processingserver

Data detectionMeasuring/protection devices

3WLcircuit

breaker

3VLcircuit

breaker

Power monitoring softwarepowermanager

Ethernet

Ethernet (Modbus)

7KMPAC3200

7KMPAC4200

7KMPAC3200

Modbus RS485

7KMPAC3100

7KT PAC1500

I202

_013

89c


© Siemens AG 2012

13


powermanager




You can find more information on the Internet at:

www.siemens.com/lowvoltage/energymanagement


PU(UNIT,

SET, M)

PS*/P. unit

PG Weightper PU

approx.

kg

powermanager V 2.0• Trial license

Up to 10 devices inc. "Expert" and "Web" option packsfull product license limited to 30 days

B 3ZS2 711-0CC20-0YA7 1 1 unit 133 0.230

• Full product license, LeanUp to 10 devices

B 3ZS2 711-0CC20-0YA0 1 1 unit 133 0.230

• Full product license, LeanUp to 50 devices

B 3ZS2 712-0CC20-0YA0 1 1 unit 133 0.230

• Full product license, AdvancedUp to 100 devices

B 3ZS2 713-0CC20-0YA0 1 1 unit 133 0.230

• Full product license, MaximumUp to 200 devices

B 3ZS2 714-0CC20-0YA0 1 1 unit 133 0.230

• Upgrade licenseFrom Lean to Standard

B 3ZS2 712-0CC20-0YD0 1 1 unit 133 0.230

• Upgrade licenseFrom Standard to Advanced

B 3ZS2 713-0CC20-0YD0 1 1 unit 133 0.230

• Upgrade licenseFrom Advanced to Maximum

B 3ZS2 714-0CC20-0YD0 1 1 unit 133 0.230

• Option pack "Up to 5 Clients"Expansion up to 5 clients

B 3ZS2 710-3CC20-0YH0 1 1 unit 133 0.230

• Option pack "From 5 to 10 Clients"Expansion from 5 to 10 clients (Requirement: Option pack "Up to 5 Clients")

B 3ZS2 710-4CC20-0YH0 1 1 unit 133 0.230

• Option pack "Expert"Option for creating and presenting any number of freely configured images

B 3ZS2 710-2CC20-0YH0 1 1 unit 133 0.230

• Option pack "Web"Option for access over the web (e. g. Internet Explorer) for up to 10 clients

B 3ZS2 710-1CC20-0YH0 1 1 unit 133 0.230

• Option pack "Distributed Systems (2)"Option for the connection of 2 autonomous powermanager systems for the exchange of measured values and alarms

B 3ZS2 718-1CC00-0YH0 1 1 unit 133 0.230


B 3ZS2 718-2CC00-0YH0 1 1 unit 133 0.230


B 3ZS2 718-3CC00-0YH0 1 1 unit 133 0.230


© Siemens AG 2012


powerconfig

13/18 Siemens LV 10.1 · 2012

13

■ Overview

Setting the parameters of a SENTRON device

The powerconfig software is the new combined commissioning and service tool for communication-capable SENTRON measur-ing devices and circuit breakers.

The PC-based tool makes the parameterization of the devices easier, which gives rise to a considerable time saving, particu-larly when several devices have to be set up.

With powerconfig, the 3WL and 3VL circuit breakers and the 7KM PAC measuring devices with expansion modules can be parameterized, documented, operated and monitored using various communication interfaces.

■ Benefits

• Parameterization, documentation, operation and monitoring in one software

• Documentation of measured values and settings• Clear presentation of the available parameters including plau-

sibility testing of the inputs• Display of the available device statuses and measured values

in standardized views• Project-oriented storage of device data• Consistent operation and usability• Support of the various device communication interfaces

(Modbus RTU, Modbus TCP)• Supported languages: English and German• Read-out and saving of device recordings

(device-dependent)• Update of the device firmware and loading of language packs

(device-dependent)• No programming knowledge required for operation• Communication via PROFIBUS and PROFINET and

connection to STEP7 (in preparation)

Display of current measured variables (harmonic)

■ Application

System requirements

Hardware requirements• Processor: Intel Pentium III, 1 GHz (or higher)• RAM: at least 512 MB• Hard disk: at least 1 GB free• Color monitor with a minimum resolution of 1024 x 768 pixels

Supported operating systems• Microsoft Windows XP Prof. 32Bit SP3. MUL OS• Microsoft Windows 7 Professional (32Bit)• Microsoft Windows 7 Ultimate (32Bit) • Microsoft Windows 7 Home Basic (32Bit)

Required framework:• Microsoft .NET V3.5 SP1


powerconfig is available free of charge at

http://support.automation.siemens.com/WW/view/en/50241697

You can find more information on the Internet at:

www.siemens.com/sentron


© Siemens AG 2012

Documents

Catalog LV 10.1 · 2012 English - IL DIVERSO KFT Sentron/Sentron 13.pdf13/13 PAC3200 block library for SIMATIC WinCC Configuring, visualizing and controlling with SENTRON 13/14 General