CATALOG v08 (ENG) (print)imgusr.tradekey.com/images/uploadedimages/brochures/4/6/...200-l drums in 20' containers (small quantities or samples), 20' ISO-tanks (tank containers), flexi-tanks

ORGKHIM SPRODUCTInnovations Based on the Nature

Our ompanyC

ORGKHIM Biochemical Holding Company is the leader in development, production and supplies of resins, emulsifiers,

polymerization initiators, aromatic extender oils and other products for tire and rubber industries. High quality of our products

is guaranteed by our Quality Management System certified under 8, ,

requirements.

Deployment of advanced technologies and internal center of scientific and technical competence facilitate scientific research

of ORGKHIM Company, as well as development and manufacturing of new products. ORGKHIM is a reliable producer and

supplier delivering products of world-class quality and environmental standards.

Production facilities of ORGKHIM, its laboratories internal R&D center make ORGKHIM a single source of complete

range of raw materials for tire and rubber industries, ready to provide technical solution and to respond to all customer

requirements in terms of product and service quality, technical support and innovation.

Today ORGKHIM extends its active cooperation with the leaders of chemical industry in Russia, Germany, the USA, the

Netherlands, Finland, Czech Republic, Poland, China, Malaysia, South Korea and other countries. Since 2006 the Holding

has been full member of Pine ChemicalsAssociation, USA.

ISO 9001:200 ISO 14001:2004 OHSAS 18001:2007

and

Our mission:

“Stable business development, dynamic research and implementation of high-quality, eco-friendly products of “green

chemistry” at the world-class level based on renewable natural resources ensuring protection of environment and the

community in general”.

Our marketing strategy:

70% of product sales to producers of synthetic rubber and other polymers, as well as to tire makers, yet keeping a balanced

mix of petrochemical and pine chemical products.

1

2

3

� NORMAN Extender Oil................................................................................... 4

� Tailing Fraction of s (FNET)Oil Extract ............................................................... 5

6

� STABALOX Antioxidants................................................................................. 7

� PHENAMIN-132 Antioxidants.......................................................................... 7

8

� EDiSKAN Complex Emulsifier..................................................................... 9

� EDiSKAN Emulsifier...........................................................................5600 10

� ABS K Emulsifier......................................................................................... 11

� DisKaS partially saponified rosin after disproportionation............................ 11

� POLINAT Emulsifier....................................................................................... 12

� POLINOR FattyAcids..................................................................................... 13

14

� TERPINE-60, 70, 8 , 95 Pine Oil5 .............................................................................. 15

� TERPINE-98 Terpineol (Solid) ......................................................................... 16

� TERPENSOLTerpenic Hydrocarbons .............................................................. 16

� Hydroperoxide of Hydrogenated Terpenic Hydrocarbons .................................... 17

18

� Gum Rosin.................................................................................................... 19

� TYREON Granulated Rosin............................................................................. 20

� Granulated Tall Rosin Esters (GEK).................................................................. 21

� ESTERPENT Granulated Rosin Esters............................................................. 22

� Non-crystallizing modified cable-grade rosin...................................................... 23

� DiSKAN Resins.............................................................................................. 24

25

� AFTISOTDORAdhesiveAdditive ..................................................................... 26

Adhesive Additives............................ ............ ............................... ......

Rosin roductsP . .......................................................................... ........

Pine il and urpentine roductsO T P ........................................ ......................

Antioxidants.............................................................................................

Plasticiser Oils and Tailing Fraction of Oil Extracts.................

Content

Emulsifiers and Fatty Acids.................................................................

PLA

STIC

ISER

OIL

S A

ND

TA

ILIN

G F

RA

CTIO

N O

F O

IL E

XTR

AC

TS

NORMAN Extender Oil

Description:

Application:

NORMAN extender oil is a special non-carcinogenic process oil meetingthe EU regulations on polycyclic aromatic hydrocarbons (PAHs), used in natural andsynthetic rubbers and in tire making.

softener and plasticizer for synthetic and naturalgeneral purpose rubbers.

softener and plasticizer for production of tires using carbon black orsilica filling.

Rubber applications:

Automotive tires:

Three grades of NORMAN oil are available depending on type and application:

Thread rubber for car tires, replacement mount, or truck tires.

Tires for agricultural and construction applications, winter truck tires.

- - Treated DistillateAromatic Extract

- - Treated ResidualAromatic Extract

- - Mild Extraction Solvate

NORMAN 346 TDAE

NORMAN 583 TRAE

NORMAN 132 MES

Thread rubber for car tires, OEM mount.

Transportation and Storage:

Shelf life:

�

�

�

By :

By

By

Road

Rail:

Sea:

200-l drums in 20' containers (small quantities or samples), 20' ISO-tanks (tank containers), flexi-tanks in 20'containers

200-l drums in 20' containers (small quantities or samples), 20' ISO-tanks (tank containers), flexi-tanks in 20'containers, tank cars

200-l drums in 20' containers (small quantities or samples), 20' ISO-tanks (tank containers), flexi-tanks in 20'containers, bulk carriers (quantities starting at 500 t).

Extender oil shall be stored per GOST 1510

12 months from the date of manufacture

;

;

.

Petroleum and petroleum products. Marking, packing, transportation andstorage.

4

Environmental Safety

Efficiency

Norman oil is an environmentally-friendly product with low content of polycyclic aromatic hydrocarbons, meeting therequirements of the Regulation (EC) No. 1907/2006:- content of benzo(a)pyrene is below 1 mg/kg (typically around 0.06-0.13 mg/kg);- total of individual polycyclic aromatic hydrocarbons is below 10 mg/kg (typically less than 2.6 mg/kg for NORMAN-346 andless than 1.0 mg/kg for NORMAN-583);

The carbon-type composition of NORMAN oils promotes its compatibility both with synthetic (NBR, SBR, PBR) and naturalrubbers. Using of NORMAN oils improves process characteristics of rubber formulations and performance of tires producedthrough increase of their durability and fuel economy, decrease of noise and price reduction. High level of aromatics content(min 25%w) provides better wet grip improving driving safety.

NORMAN extender oil has been registered under REACH requirements (Registration Number 01-2119488706-23-0018).The product fully complies with the requirements of the Regulation (EC) No 1907/2006 of the European Parliament and of theCouncil of 18 December 2006 concerning the Registration, Evaluation,Authorisation and Restriction of Chemicals (REACH),including provisions of the Commission Regulation (EC) No 552/2009 of 22 June 2009.

NORMAN extender oils present no hazards to health and environment when used as recommended and occupational safetyand personal care procedures are followed. Please, refer to product SDS for more details.

Advantages:

European Regulations:

Health and Safety

PLASTICISER OILS AND TAILING FRACTION OF OIL EXTRACTS

Tailing Fraction of s (FNET)Oil Extract

Product Data:

Description:

Application:

Shelf life:

Advantages:

High aromatic mineral process oil.

Plasticizer for synthetic rubbers and softener ingredient in rubbercompounds. Source of high-quality petroleum coke. Other applications include usingFNET as plasticizer for making road and construction bitumens and as softener forpolymer-modified bitumens.

FNET is completely free of saturated paraffinic and naphthenichydrocarbons. High content (85% mass) of PCAdelivers excellent adhesion properties toFNET-based bitumens.

6 months from the date of manufacture.

Parameters Normal Value

Kinematic viscosity at 100°C, mm /s min.-max.2

, 30 - 40

Flash point, COC, °C min., 240

Water, % max., Traces

Pour point, °C max., 40

5

Product Data:

NORMAN Extender Oil

Normal Value

Parameters

Normal Value

346 TDAE 583 TRAE 132 MES

Density at 20°C, kg/m3

927 - 967 940 - 980 895 - 925

Density at °C, kg/m153

9 - 930 70 - -

Kinematic viscosity at 100°C, mm /s2

16 - 23 28 - 60 13 - 17

Viscosity-gravity constant 0 8 0. 63 - .915 0 8 0. 63 - .915 0 8 0. 25 - .867

Refractive index at 50°C 1 508 1 528. - . - -

Refractive index at 20°C 1 520 1 540. - . 1 520 - 1 550. . 1 1 5.495 - . 10

Aniline point, °C 64 - 72 6 - 782 90 - 100

Pour point, °C, max. 30 40 0

Aromatic carbon content, %,

PCA extract content, %, min. 2 9. 2 9. 2.9

Flash point, COC, °C, min. 220 220 2 03

Sulfur, %, max. 3 0. 3 0. 3 0.

Water, %, max. 0.03 0.03 0.03

Average glass-transition temperature, °C, min-max. - (42 - 50) - 0(4 - 50) - 57 63( - )

PLASTICISER OILS AND TAILING FRACTION OF OIL EXTRACTS

min.max.

AN

TIO

XID

AN

TS

7

STABALOX Antioxidant

Description:

Application:

henolic stabilizer produced by alkylation of alkylphenol (С8 - С9) withisobutylene. Heavy liquid of light-yellow to dark-brown color, free from mechanicalinclusions.

(40-% emulsifier-based solution of )

Ageing protection of styrene-butadiene (SBR) and nitrile-butadiene (NBR)rubbers.

P

STABALOX

STABALOX-90

STABALOX-30

Stabilizer

Emulsion

Parameters

Normal Value

Stabilizer Emulsion

Min. content of antioxidant (%), 90 30

Flash point, COC, °C, min 116 116

PHENAMIN-132 Antioxidant

Description:

Application:

Aminphenolic stabilizer dissolved in oil ( ) obtained by condensingalkylphenols and hexamethylenetetramine. Heavy liquid of light-yellow to dark-browncolor, free from mechanical inclusions.

Stabilization of oil-extended rubbers.

light MES


Content of antioxidant (%), min.-max., 4 60 - 0

Free alkylphenols (calculated on the basis of absolute content of antioxidant, %, max.) 3 8.


Shelf life:

Tank cars and road tanks in accordance with theregulations applicable to each specific mode of transport. Product sh be stored inairtight steel containers at temperature not exceeding 40°С.


ould

Product Data:


Shelf life:

Tank cars and road tanks in accordance with theregulations applicable to each specific mode of transport. Product sh be stored inairtight steel containers at temperature not exceeding 40°С.


ould

Product Data:

Note: 5% of the total production of PHENAMIN with up to 4% of free alkylphenols is acceptable.

ANTIOXIDANTS

EM

ULS

IFIE

RS

AN

D F

ATTY

AC

IDS

8

Description:

Application:

Water-based solution of mixture of potassium salts formed withdisproportionate resin acids and distilled fatty acids. Emulsifier is produced bysaponification of resin and fatty acids after disproportionation.

, (SBR) (NBR)Production of styrene-butadiene butadiene-nitrile and otherchemical rubbers derived by low-temperature emulsion (co)polymerization.

EMULSIFIERS AND FATTY ACIDS

EDiSKAN EmulsifierComplex

Advantages:

�

�

�

Ready-to-use product.

Conveniently dispensed for preparation of water phase with the required concentration and for feeding the(co)polymerization process directly from the receiving container

Use of EDiSKAN saves production costs and increases rubber production output compared with the traditional emulsifierapplication as mixture of two separate products: potassium salts of disproportional rosin and fatty acid potassium salts.

into.

9


Shelf life:

Tank cars and road tanks in accordance with the regulations applicable to each specific modeof transport. The product should be transported and stored in closed containers at temperatures from –30°C to +40°C.


Product Data:

ParametersNormal Value

4115-1418 4115-1618 1010-1418 1010-1618

Solid residue, %, min. max.- 32 - 37 32 - 37 32 - 37 32 - 37

Acid number of source product before saponification, mg КОН/g, min. 165 165 170 165

Free resin acids in source product before saponification, %, min.-max. 67 - 73 67 - 73 44 - 50 44 - 50

Acids with conjugated double bonds (on abietic acid basis) in sourceproduct before saponification, %, max.

- - 0 1. 0 1.

Acids with conjugated double bonds (on abietic acid basis) in sourceproduct before saponification, %, max. (at wavelength 241nm)

5 0. 5 0. 5 0. 5 0.

Iron, %

рН, min.-max. - - 10 8 - 11 6. . 10 8 - 11 6. .

Free alkali on solid residue basis, %, min.-max. 0 - 0 15. 0 - 0 15. 0 - 0 15. 0 - 0 15.

Fractional structure of fatty acids in terms of 100% of fatty acids sum in product before saponification, %

Laurinic acid С12 0 - 5 0 - 5 0 - 5 0 - 5

Miristic acid С14 15 - 25 0 - 5 15 - 25 0 - 5

Palmitic acid С16 20 - 40 15 - 25 20 - 40 15 - 25

Stearic acid С180 0 - 5 0 - 5 0 - 5 0 - 5

Oleic acid С181 45 - 60 60 - 80 45 - 60 60 - 80

Acids С -С20 220 - 5 0 - 5 0 - 5 0 - 5

Not specified. Testing required

EDiSKAN Emulsifier5600

Description:

Application:

Water-based solution of mixture of potassium salts formed withdisproportionate resin acids. Emulsifier is produced by saponification of resin acids afterdisproportionation.

Production of styrene-butadiene butadiene-nitrile and otherchemical rubbers derived by low-temperature emulsion (co)polymerization.

, (SBR) (NBR)


Solid residue, %, min. max.- 48 52-

Acid number of source product before saponification, mg КОН/g, min. 162

Free resin acids in source product before saponification, %, min.-max. 53

Acids with conjugated double bonds (on abietic acid basis) in source product before saponification, %,max.

0.1

Acids with conjugated double bonds (on abietic acid basis) in source product before saponification, %,max. (at wavelength 241nm)

5 0.

Iron, %

рН, min.-max. 11.5 - 12.5

10

Product Data:


Shelf life:

Tank cars and road tanks in accordance with the regulations applicable to each specific modeof transport. The product should be transported and stored in closed containers at temperatures from –30°C to +40°C.


Advantages:

�

�

�



Use of EDiSKAN saves production costs and increases rubber production output compared with the traditionalemulsifier application as mixture of two separate products: potassium salts of disproportional rosin and fatty acidpotassium salts.

into.

5600

N .

T

ot specified

esting required


Description:

Application:

Water-based solution of potassium salts formed with disproportionate resinacids. Emulsifier is produced by saponification of resin acids after disproportionation.

Production of synthetic rubbers by low-temperature emulsion(co)polymerization; production ofABS copolymers.


ABS K Emulsifier

Advantages:

�

�

�


Conveniently dispensed for preparation of water phase with the required concentrationand for feeding the (co)polymerization process directly from the receiving container

Use of ABS K saves production costs and increases rubber production output.

into .


ABS К-25 А К-50BS

Concentration of emulsifier solution, % 25 ± 1 50 2±

Concentration of dehydroabietic acid salt, % min., 6 0. 6 0.

Concentration of abietic acid salt, % max., 0.2 0.2

pH, min.-max. 10 12- 10 12-

Color , mg /100 cmvalue I2

340 - 60 40 - 60


Shelf life:

Tank cars and road tanks in accordance with the regulations applicable to each specific modeof transport. The product should be transported and stored in closed containers at temperatures from –30°C to +40°C


.

11

Product Data:

Description:

Application:

Advantages:

High-quality rosin after disproportionation.

DisKaS is used as emulsifier to produce synthetic rubbers.

DisKaS are types of high-quality disproportionated rosin that can be easily transportedand handled (they can be processed into granules under dust-free technique and shippedin paper bags (big bags), requiring less hydroxide for saponification. The soap featuresbetter color properties.

DisKaS Partially Saponified Rosin after Disproportionation


Acid Number. mg KOH/g 110 - 125

Softening point (ring-and-ball), °C min. 80

Abietic acid, wt % max. 0.5

Dehydroabietic acid, wt % min. 50

Gardner color, 50% solution in toluene max. 10

Product Data:

Description:

Application:

Potassium soap from mixture of POLINOR 1618M fatty acids of vegetableorigin. Emulsifier is produced by saponification of fatty acids of vegetable origin afterdisproportionation.

Production of synthetic rubbers by emulsion polymerization.

POLINAT Emulsifier

Advantages:

�

�

�



Use of POLINAT saves production costs and increases rubber production output.

into.


Shelf life:

Emulsifier is shipped in tank cars, road tanks or 200-dm as per applicablespecifications.


3barrels

12


Product Data:


Solid residue, % 23 - 27

Free alkali on solid residue basis, %, max. 0.15

pH of 1-% solution 11 - 12

Acid number of product before saponification, mg KOH/g, min. max.- 195 - 205

Iodine number of source product before saponification, mg I /100 cm , max.2

375

Color , mg I /100 cm , max.value 2

310

Unsaponifiables, %, max. 3,0

Fractional composition of source product before saponification, %

Capric acid C10 0 - 5 0.

Laurinic acid С12 0 - 5 0.

Miristic acid С14 0 - 5 0.

Palmitic acid С16 10 - 35

Stearic acid С180

0 - 5 0.

Oleic acid С181

55 - 85

Linoleic acid С182

0 - 1 0.

Linolenic С183

0 - 1 0.

Above С18 0 - 4 0.

POLINOR Fatty Acids

13


Description: Mixture of distilled fatty acids of vegetable origin with fractional compositionC10 – C18. White to light-brown homogeneous solid mass.

Advantages:

�

�

�

Confers high level of stability to latex in phases of synthesis, unreacted monomertransportation and storage

Actually, it is a concentrated oleic acid (60 - 70%).

It facilitates development and introduction of elastomers with improved processabilitycharacteristics that allow obtaining rubbers with new quality level.

stripping as well as during .


1218 1416 1418 1618 1618 М

Mechanical impurities, %, max. 0.04 0.04 0.04 0.04 0.04

Acid number, mg KOH/g, min. 245 210 210 205 195

Saponification number, mg KOH/g, min. 246 212 212 206 197

Iodine number, g I /100 g, max.2 17 15 25 15 75

Pour point, °С, min.-max. 20 - 35 35 - 40 40 - 45 45 - 55 25 - 35

Unsaponifiables, %, max. 1.0 51. 51. 51. 3.0

Color , mg I /100 cm , max.value 2

33 01 . 3 01 . 3 01 . 3 01 . 3 01 .

Fractional composition, %

Capric acid C10 0 - 1 - - - 0 - 5

Laurinic acid С12 40 - 57 - 0 - 2 0 - 3 0 - 5

Miristic acid С14 15 - 24 33 - 40 30 - 45 1 - 8 0 - 5

Palmitic acid С16 8 - 16 55 - 68 35 - 50 40 - 65 10 - 35

Stearic acid С180

0 - 8 0 - 3 0 - 3 30 - 55 0 - 5

Oleic acid С181

10 - 20 2 - 8 10 - 20 0 - 10 55 - 85

Linoleic acid С182

0 - 2 0 - 1 0 - 1 0 - 1 0 - 1

Linolenic С183

- - - - 0 - 1

Above 8С1 - - - - 40 -


Shelf life:

Steam-heated tank cars and road tanks in accordance with the regulations applicable to eachspecific mode of transport. Fatty acids should be stored at clean premises in barrels or drums, or should be stored inspecial tanks fitted with covers and heating coils.


indoor

Application: Fatty acid ingredient of emulsifiers in the production of emulsionpolymerization rubbers, latexes and rubber compounds

.of chemical by emulsion

polymerization

Product Data:

PIN

E O

IL A

ND

TU

RP

EN

TIN

E P

RO

DU

CTS

14

TERPINE-60, 70, 85, 95 Pine Oil

Description:

pplication:TERPINE-60, 70

TERPINE-85, 95:

A:

Mixture of terpen alcohols and terpen hydrocarbons produced byhydration of

Foaming agent for froth flotation (beneficiation of non-ferrous ores,mineral fertlizers etc.)

Source product for perfumery-grade terpineol, ingredient of perfumeryformulation and fragrances of disinfecting and antiseptic products.

e e- , several

vary eα pinene followed by rectification. Depending on application grades

are available that by their content of monoterpen alcohols (terpineols) in thefinished product.

Advantages:

• Unique production facility in Russia

• Eco-friendly product

• High -terpineol content (antibacterial properties)

• Export oriented product (REACH pre-registration in accordance with the Regulation

.

.

.

N 1907/2006

α

o. ).

Product Data:

15

PINE OIL AND TURPENTINE PRODUCTS


Shelf life:

Tank cars, covered carriages (drums) or by hooded road trucks (IBC). The product should bestored in 210-kg net galvanized steel drums.Avoid heating and direct sunlight.


Наименование показателя

Норма

60 7085

Premium85

Standard95

Hazen color, max — — 30 50 —

Density at 20°С, g/cm , min.-max.3 0. -

0.9905

200. -0.9910

250.920 -0.935

0.9 0 -0.9 5

23

0.930 -0.945

Refractive index at 20°С, min.-max.1 67

0.4 -1.48

1 670

.4 -1.48

1.478 -1.484

1.478 -1.484

1.480 -1.484

Water, % max. 1 0. 0.7 0 7. 0.7 0.5

Total of terpen alcohols, % mine , . 60 70 85 85 95

TERPINE-98 Terpineol (Solid)

Description:


Shelf life

Application:

:

White crystalline product containing min. 95%

200 galvanized steel drums.

months from the date of manufacture.

α-terpineol.

Pharmaceuticals.

-kg

12

Advantages:

• Unique production facility in Russia

• Eco-friendly product

• High

.

.

.

-

α-terpineol content (antibacterial properties)

• Export oriented product.


Density at 20°С, g/cm , min.-max.3

0 930 - 0 945. .

Refractive index at 20°С, min.-max. 1 482 - 1 485. .

Melting point, °C 31 - 36

α-terpineol, % min., 95

Product Data:

16


TERPENSOL eTerpen Hydrocarbons

Description:

Application:


Shelf life:

Mixture of terpenic hydrocarbons, mainly of pinene and mentadienes.Clear colorless to light-yellow liquid free from mechanical impurities, with specific odor.

Thinner to dilute paints and coatings, or as source product for hydroge-nated terpenic hydrocarbons.

Any mode of transportation in accordance with the regula-tions applicable to carriage of hazardous goods for the given mode of transport.

12 .months from the date of manufacture


Density at 20°C, g/cm , min. max3

- . 0. 0.858 - 877

Refractive index, n , min.-max.20

D 1 4710 - 1 4825. .

Boiling range at 101325 Pa (760 mm Hg)

Initial boiling point, °C min., 164

Volume of distillate up to ,190°C, % min. 94

Product Data:

Hydroperoxide of Hydrogenated Terpen Hydrocarbonse


17

Description: High-efficient eco-friendly initiator of emulsion polymerization to producestyrene-butadiene and nitrile-butadiene rubbers. Hydroperoxides areproduced by oxidation of hydrogenated turpentine or of pin ne (both being products ofhigh-level processing of turpentine).

(SBR) (NBR)e

Grade А

Grade B

– hydroperoxide from hydrogenated turpentine.

– hydroperoxide from hydrogenated pin ne.

Initiator of emulsion polymerization in production

e

SBR & NBR .Application:

Advantages:

• High homogeneity.

• High reactivity during polymerization.

• Improved cost/performance ratio and environment impact of rubber production.

• Hazard Class 4 per GOST 12.1.007-76 that is lower compared to peers having Hazard Class 2.

• Initiator of free radical polymerization processes.

• Source product for fine organic synthesis.

its


Grade A Grade B

Content of hydroperoxide, %, wt 38 - 42 50 - 55

Concentration of organic acids, mol/cm , max.3

0.5 0.5

Refractive index, n20

D 1 4 – 1 4 0. 55 . 8 1 467 – 1 490. .


helf life:S

In by covered railway carriages or by road transport. Product should be stored atwarehouse facilities at least 2 meters away from heating source, in airtight containers at temperature not exceeding

30°С.


barrelsindoor

Product Data:

RO

SIN

PR

OD

UC

TS

18


Color Х WW Wg. .

Ash, % max, . 0 .03

Mechanical impurities, % max, . 0 .03

Softening point, °С min., 69

Acid number, mg KOH/g, min. 169

Water, % max., 0 2.

Gum Rosin

Description:

Application:

Solid part of resin acids with general formula С Н О from

pine gum distillation of turpentine. Transparent glassy mass.20 30 2 recovered

treated after

Synthetic rubber, pulp-and-paper, tires, elastomers, paints and coatings,soap-making etc.

ROSIN PRODUCTS

Product Data:


Shelf life:

Tank cars, road tanks or covered vehicles. Packed in card-board drums, galvanized or aluminum containers. Store at covered facilities with goodventilation, or at open premises protected from direct sunlight.

.24 months from the date of manufacture

19


Water, % max., 0 2.

Ash, % max., 0 04.

Softening point, °С min., 74

Acid number, mg KOH/g, min. 162

Pellets flowability at 50°С excellent

Advantages:

�

�

�

No susceptibility to oxidation, crystallization or caking during transportation and storage; preserving all the physical andchemical properties, as well as processability characteristics proper to gum rosin.

Cost saving in production and avoidance of product waste through elimination of the operation of chipping gum rosinpacked in drums.

REACH pre-registration authorizing export to the EU countries.

TYREON Granulated Rosin-160

Description

Application

:

:

Granulated resin produced from gum or tall oil rosin. Yellow to brown spher-ical pellets sized from 2 to 6 mm, free from mechanical impurities.

.Tires, industrial rubber products

Product Data:


Shelf life:

By railway carriages or road tanks. Packed and stored in convolute wound cardboard drums.


20

ROSIN PRODUCTS

Parameters

Normal Value

А В С

Solution color (Gardner, mg I /100 cm ), min.- max.2

33 - 4 4 - 6 6 - 7

Solution color (iodimetric scale, mg I /100 cm ), min.-max.)2

35 - 7 7 - 15 15 - 20

Softening point, °С, min. 102 92 85

Acid number, mg KOH/g, max. 8 10 20

Ash, % max., 0 10. 0 10. 0 10.

Solubility or tol enein ethanol-benzene ethanol- u mixture complete complete complete

Tendency to crystallize in mixture of and butyl acetatethe ethanol none none none

Granulated Tall Rosin Esters (GEK)

Product Data:

Transportation and Storage

Shelf life:

: By railway or road in covered vehicles. When shipped by rail, the product can be transportedas full-car or less-than-car loads. Store at covered facilities of the manufacturer or under shed, factory-packed, away fromheat sources and direct sunlight.


21

Advantages:

�

�

�

Light color is maintained after long-term (up to 12 months) storage and heating at 180 – 200°C six hours.

Physical and chemical properties of esters can be adjusted following customer .

No crushing of granules during transportation and storage.

during

specific requirements

Description:

Application:

Spherical pellets of glycerol rosin ester, from glycerol (trihydricalcohol) and resin acids contained in rosin. The ester is available in three grades – A, Band C – having different physical and chemical properties.

Paints and coatings, thermoplastic compounds for road marking, hot-meltsand pressure sensitive adhesives, insulation materials.

obtained

ROSIN PRODUCTS

ESTERPENT Granulated Rosin Esters

Description

Application

:

:

Pentoerythritol obtained, and shaped into spherical pellets

rosin ester from pentaerythritol (tetrahydricalcohol) and resin acids contained in rosin . The ester isavailable in three grades –A, B and C – having different physical and chemical properties.

Paints and coatings, thermoplastic compounds for road marking, hot meltand pressure sensitive adhesives, insulation materials.

Product Data:

22

Parameters

Normal Value

А В С

Solution color (Gardner, mg I /100 cm ), min.- max.2

33 - 4 4 - 5

5 - 7

Solution color (iodi scale, mg I /100 cm ), min.-max.)ne 2

35 - 7 7 - 10 1 - 200

Softening point, °С, min. 100 95 85

Acid number, mg KOH/g, max. 12 16 18

Ash, % max., 0 10. 0 10. 0 10.

Solubility or tol enein ethanol-benzene ethanol- u mixture complete complete complete

Tendency to crystallize in mixture of and butyl acetatethe ethanol none none none

ROSIN PRODUCTS

Transportation and Storage

Shelf life:

: By railway or road in covered vehicles. When shipped by rail, the product can be transportedas full-car or less-than-car loads. Store at covered facilities of the manufacturer or under shed, factory-packed, away fromheat sources and direct sunlight.


Advantages:

�

�

�

Light color is maintained after long-term (up to 12 months) storage and heating at 180 – 200°C six hours.

Physical and chemical properties of esters can be adjusted following customer .

No crushing of granules during transportation and storage.

during

specific requirements


Softening temperature, °C min., 70

Volume resistivity at (100±5) V and 110°C, Ω cm min, . 2 х 1012

Acid number, mg KO /g min.H , 50

Ash, % max., 0.1

Tendency to crystallizeno porous honey-like

residue

Advantages:

�

�

�

Wide range of application for various electrical insulation materials.

High volume resistivity.

High softening temperature.

Description:

Application:

Gum rosin after partial esterification with glycerol. Light-yellow to browntransparent glassy mass with air bubbles.

Dielectric material for insulations, power cables coating for equipmentcomponents and electrical winding impregnation.

;

Non-crystallizing modified cable-grade rosin

Product Data:


Shelf life:

Railway or road transport in covered vehicles in accordance with the regulations applicable tocarriage of hazardous goods for the given mode of transportation. Store in covered facilities, or in the open air under shed,away from heat and protected against direct sunlight.


23

ROSIN PRODUCTS


Acid number, mg KO /g min.H , 162

Free resin acids, %, min.–max. 67 - 73

Acids with conjugated double bonds (on abietic acid basis),% max, . 0.1

Acids with conjugated double bonds (on abietic acid basis),% max., * 5 0.

Iron, % max., 0 2.00

Unsaponifiables, % max., 8.0

Softening temperature, °С max., 70

Description:

Application:

DiSKAN is a mixture of disproportionated unsaturated resin and fatty acids.Light-yellow to dark-brown homogeneous resinous fluid (at 80°C). Homogeneous clay-like mass with stable color ( at 20°C).

DiSKAN resin is used to prepare complex emulsifiers for synthetic rubbersproduced by emulsion polymerization.

DiSKAN Resin


Shelf life:

The product may be transported by any means of transports in accordance with the carriageregulations applicable to the means of transport selected. The product is packaged in 100-180 dm3 steel or zinc-coated steeldrums. Resin can be dispensed in railway cars or truck tanks fitted with steam or electric heating in accordance with theSafety Regulations applicable to the selected means of transportation.

Product shall be stored at warehouses of manufacturer/customer in heated containers made of carbon or stainless steel,aluminum or its alloys. The resin should be heated up to 60-80°C prior to dispensing for storage or use in production.


* Note: As measured by spectro of absorbance of abietic acid in spectrum with 239, 240, 242 and 243 nmwavelengths.

UV- scopy UV-

24

Product Data:

ROSIN PRODUCTS

AD

HES

IVE A

DD

ITIV

ES

25

AFTISOTDOR Adhesive Additive

Description:

Application:

Binder for “cold asphalt” process (road surfacing under negativetemperature conditions). The additive is produced as a dark-brown to black viscous fluidof two types:

bitumen and polymer- bitumen binder for mastic macadam asphalt-concretecompounds.

component in production of Rubber and various compositionmaterials

–

–

compound of maleic anhydride-modified carboxylic acids and resins ofnatural origin.

maleic anhydride-modified carboxylic acids of natural origin

Industrial Products.

�

�

Grade

Grade

A

B .

Advantages:

�

�

�

�

�

�

Eco-friendly product safe for humans and environment.

Confers durability to asphalt surfaces and guarantees their crack-propagation resistance, resistance to heat, shear, waterand low temperature.

raw materials of inferior grades instead of road construction materials.

Perfect binding both with acid and basic materials.

Binding product for “cold asphalt” process.

Compatibility with various grades of thermoplastic elastomers.

Possibility to use costly


Shelf life:

Any mode of transportation in covered vehicles in accordance with applicable rules. The prod-uct is dispensed in clean, dry, tightly-closed steel drums, type Bs P-200 (GOST 13950), or in heated rail or truck tanks.Storage at premises, at temperature not exceeding 80ºC, at least 1 m away from heating appliances.



Grade А Grade B

Acid number, mg KO /g min.H , 200 155

Free maleic anhydride, % max., 0.7 0.7

Volatiles, % max., 0.7 0.7

ADHESIVE ADDITIVES

Examples of application:

Today AFTISOTDOR Adhesive Additive is used in Nizhny Novgorod region and in many other regions of the RussianFederation.

The proof of high efficiency of AFTISOTDOR in application is the number of road constructors interested in our productgrowing month by month.

Given that AFTISOTDOR Adhesive Additive is absolutely new and innovative material offering high efficiency in application,ORGKHIM plans to increase its production in order to satisfy the demand road construction industry.from

26

Product Data:

www.orgkhim.comтел./факс +7(831) 259-77-47:

Management Company

Trade House ORGKHIM CJSC

29-d, Gagarin Av., Nizhny Novgorod, 603057, Russian Federation

Uren,

Nizhny Novgorod region, 606800, Russian Federation

Russian Federation

ORGKHIM Production Company CJSC

29 Lenina Street,

CJSCSibirsky Pine Chemical Plant

12/56 South Industrial Zone, Lesosibirsk,

Krasnoyarsk region, 662543, Russian Federation

BIOSINTEZ

Production and Service Company OOO

Office 1, 2, Leninski Av., Voronezh, 394014,

Documents

CATALOG v08 (ENG) (print)imgusr.tradekey.com/images/uploadedimages/brochures/4/6/...200-l drums in 20' containers (small quantities or samples), 20' ISO-tanks (tank containers), flexi-tanks