Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
ED
/22
05
13
DEGREASING
GRASIMOTOR. Water-based Engine-Degreasing Agent .......................................... A1
GRASOIL. Diesel-based Engine-Degreasing Agent.................................................. A2
ASFALIM. Asphalt Cleaner ........................................................................................ A3
REVIGRAS. Special degreasing Agent for workshop Floor....................................... A4
HAND-WASH
DISOLMAN. Industrial Degreasing Hand-wash......................................................... B1
DISOLMAN MICROESFERAS. Hand-wash with microspheres................................ B2
GRASIN. Hydrating and softening Hand Gel............................................................. B3
MANDER. Dermatological Hand-Wash...................................................................... B4
MANILVA. Hand-wash Paste .......................................................................................B5
CLEAN CARS
BRISOL. Dashboard sheen ....................................................................................... C1
CONDIGON. Rubber conditioner ............................................................................... C2
DETER-AUTO. Biodegradable car detergent ............................................................ C3
DETER-CAR. Concentrated biodegradable bodywork shampoo .............................. C4
DETERQUID. Car wash liquid detergent ................................................................... C5
RAPID. Car insect cleaner ......................................................................................... C6
CERA-CAR. Car wax ................................................................................................ C7
BEDAR. Anti-static-disolving detergent ..................................................................... C8
OILS AND LUBRICANTS
REVILUB. Lithium Grease ......................................................................................... D1
REVILUB-AT. High Temperature Lithium Grease ...................................................... D2
REVILUB-EP. Extreme Pressure Molybdenite Lithium Grease ................................. D3
LUBRICAD. Lubricant for Packaging Lines............................................................... D4
REVIFLON. Synthetic Grease with PTFE ................................................................. D5
REVIGRIP-AL. Aluminum-based Anti-seize Lubricant .............................................. D6
REVIMOL. Molybdenum Bisulphate Dry Lubricant ................................................... D7
ALIREV. Non-toxic Colorless Grease for the Food Industry...................................... D8
DECARBONISER
CARBOZAN. Special decarboniser for workshops.................................................... E1
FUEL ADDITIVES
SOLI-GAS. Diesel Additive......................................................................................... F1
SOLI-FUEL. Fuel-Oil Additive .................................................................................... F2
REFRIGERANTS
ACECOR. Refrigerant Cutting Oil.............................................................................. G1
TALAVER. Green Lubricant (refrigerant) ................................................................... G2
TALAVER BLANCA. Miscible white lubricant ........................................................... G3
ELECTRICAL MAINTENANCE
SOLCUAR. Dielectric Solvent.................................................................................... H1
VENTILEC. Electrical Circuit Anti-moisture protection............................................... H2
PARAFFIN REMOVER
FINADOR. Copolymeric Paraffin Remover ................................................................. I1
PARFIN. Paraffin Cleaner............................................................................................ I2
PARFIN-P. Special steam-cleaner paraffin remover.................................................... I3
ANTI-FREEZE
RC-90. Closed circuit refrigerant anti-freeze .............................................................. J1
METALS TREATMENT
ALUTEC. Aluminum, Copper and Brass Cleaner-Polish ........................................... K1
PASIDEX. Anti-rust Degreasing Passivator ............................................................... K2
PAVON. Iron Oxide Treatment (Oxide transformer) .................................................. K3
PROMET. Metal Protector .......................................................................................... K4
PULICER. Stainless steel and aluminium smoother.................................................. K5
REVIPUL. Stainless-steel surface polish ................................................................... K6
ABSORBENTS
QUIMAN. Industrial absorbent for all types of spills and liquid leeks ........................ L1
ESCAMIT. Environmental moisture absorbent ........................................................... L2
AQUALIMP. Hydrocarbon absorbent ......................................................................... L3
ODOR REMOVER
GRASOLOR. Odour and fat removerododour and fat removerour and fat remover M1
ODOREV. Eco-Solvent Odour Remover ................................................................... M2
VARIOUS
SINCAL. Boiler and Cooling Tower Anti-Scale Protection ......................................... N1
STAPEL. Stripping lacquer ........................................................................................ N2
ABRITON. Instant blockage remover ........................................................................ N3
TELLAS. Bottle sheen ............................................................................................... N4
REVILAC. Dairy industry degreasing detergent. ....................................................... N5
PUMEX. General purpose anti-foamer ...................................................................... N6
REVIGAL. Silicone application smoother .................................................................. N7
REVISOLDER. Non-silicone weld anti-adherent ....................................................... N8
REVIFLOC. Flocculant for mining and industrial processes...................................... N9
GALVIREV. Cold galvanisation ................................................................................ N10
Chemical degreasing especial
for the use in the cleaning of
explosion engines and internal
combustion.
l General cleaning of explosion engi-nes, grease floors in garages, dirt pro-
duced by grease smokes, elimination
of waxes in bodyworks, dumpsters, etc.
l In Workshops, Town Halls, Hotels,printing Houses, and in general in
those places where is wanted to elimi-
nate the grease of engines.
PROPERTIES
l Has a big power of penetration removing the most resis-tant grease, eliminating its anchoring points.
l Its cleaning capacity resides on its contents in misciblesolvents, which allow the complete dragging of the grease
and dirt by a treatment with water pressure.
l Lubricate and protect the metallic surfaces, preventingthe corrosion because of its contents in anti-rust.
l Big capacity for the cleaning of all types of grease.
l When it is mixed in water, increase considerably its vis-cosity, increasing also the time to contact with the zone to
be treated, acting in this way more effective and economic.
INSTRUCTIONS OF USE
It can be used by Spraying, Immersion and with Brush.
Dosage:
- In engines very dirty: 1 part of product in 5 of water.
- In engines less dirty: 1 part of product in 10 of water.
l By spraying: spray the area to clean, wait a few minutesuntil the product acts, until the grease comes unstuck,
lastly apply water pressure to mix and drag all the dirt.
l Application with brush: Mix the appropriate proportion.Apply the product with a brush, rub properly the surface
to be treated, and lastly rinse with abundant water.
l By immersion: introduce the piece to be treated in a panwith the diluted product.
Wait during a few minutes until the grease softens and
after that wash it with water.
WATER-BASED
ENGINE-DEGREASING AGENTGRASIMOTOR
APPLICATIONS
Presentation
A1
Ref. T1011
l 1 L. in box of 12uds.
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Degreasing for engines soluble in
solvents as gas-oil, petroleum, etc
which guarantee a power and
quick action in the degreasing of
engines and other surfaces
tremendously greased.
l It is recommended to use it for thedegreasing of explosion engines of all
types of vehicle, so its use is essential
in Workshops, Printing Houses, Town
Halls, etc.
We also recommend its usage, for the
cleaning of floors and other surfaces tre-
mendously greased, those floors must
not be related to the human or the ani-
mals feeding.
PROPERTIES
l Big penetration power in all the nooks of the engine,guaranteeing a highest degreasing.
l Provides a protector layer in couplings and circuits.
l Lubricates and protects the metallic surfaces, preven-ting them from the corrosion.
l The paraffinic solvents included in its formulation, theysecure a dragging and an easy elimination of the grease
when are mixed with the rinse water.
INSTRUCTIONS OF USE
It can be used as Spraying, Immersion or by application
with Brush.
Dosage:
- In engines very dirty: 1 part of product in 5 of water.
- In engines less dirty: 1 part of product in 10 of water.
l By spraying: spray the area to clean, wait a few minutesuntil the product acts, until the grease comes unstuck,
lastly apply water pressure to mix and drag all the dirt.
l Application with brush: Mix the appropriate proportion.Apply the product with a brush, rub properly the surface
to be treated, and lastly rinse with abundant water.
l By immersion: introduce the piece to be treated in a panwith the diluted product.
l Wait during a few minutes until the grease softens andafter that wash it with water.
DIESEL-BASED ENGINE-DEGREASING AGENTGRASOIL
APPLICATIONS
Presentation
A2
Ref. T1004
2
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Chemical cleaning especially
elaborated to dissolve and mix the
bituminous residues as the
asphalt.
l Auto repair-shops, car washing, car
or motorcycle dealers, etc.
l Nautical Industry: Ideal for cleaning
the bilge of the boats.
l In construction, to soften and to uns-
tuck bituminous materials from surfa-
ces as roofs.
PROPERTIES
l Dissolves the deposits of pitch and asphalt, being ableto clean them easily with a flow of water.
l Is fast acting.
l Cleans vehicles and dirty equipments of pitch and asp-halt. It is also effective in the elimination of pitch accumu-
lated in the open gears.
l Removes the sendiments of the tanks of oil and fuel-oil,and also the oil spots on the floors.
l Reduces time and costs used in cleaning labors.
l Its cleaning capacity, locates in its contain in solventsable to emulsify, allowing the removing of all bituminous
materials by a simple treatment with a stream of water.
INSTRUCTIONS OF USE
It can be used as Spraying, Immersion or by application
with Brush. Do dilutions in water at the 50%.
l By spraying: spray the area to clean, wait a few minutesuntil the product acts, until the grease comes unstuck,
lastly apply water pressure to mix and drag all the dirt.
l Application with brush: Mix the appropriate proportion.Apply the product with a brush, rub properly the surface
to be treated, and lastly rinse with abundant water.
l By immersion: introduce the piece to be treated in a panwith the diluted product.
Wait during a few minutes until the grease softens and
after that wash it with water.
ASPHALT CLEANERASFALIM
APPLICATIONS
Presentation
A3
Ref. T1040
l 5 L. in box of 4 uds.
Degreasing energetic cleaner and
universal for all types of greases.
It is especially indicated for the
cleaning and degreasing of
workshops floors, car parks and
industrial asphalts.
lWe recommend the use of our degre-asing product in the cleaning of all sur-
faces where there is difficult greases to
eliminate as can be the followings:
l Airport platforms, Bus stations, Trainstations, garages, car parks, etc.
PROPERTIES
l Penetrates and reacts chemically dissolving the oils andthe most embedded greases, removing them and transfor-
ming them in soluble products and easily to drag with
water.
l Does not burn, and does not help to the combustion. Itdoes not contain dangerous solvents as: carbon tetrachlo-
ride, naphtha, benzene, etc.
l IS BIODEGRADABLE, so that it does not contribute tothe waters pollution, although it presents a sparkling
power.
INSTRUCTIONS OF USE
Depending on the quantity and the type of dirt to eliminate
it could be used pure or diluted until 10 parts in water.
Spray all surfaces to treat, allow the product to act from 3
to 5 minutes, and after that rinse with abundant water.
SPECIAL DEGREASING AGENT
FOR WORkSHOP FLOORREVIGRAS
APPLICATIONS
Presentation
A4
Ref. T1045
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Product especially elaborated for the hand washing in
people that for their work, they have them exposed to
big quantities of grease, oils, inks, and dirt in general.
Its use is especially recommended in
workshops, plumbing shops, printing
houses, shipyards, factories, ships,
mines, railways, and in general in all
those activities, in which is required a
deep cleaning action after having reali-
zed a work with oils and greases of
engines.
PROPERTIES
l Pleasant fruity smell.
l Posses a big degreasing power and emulsifier in gene-ral.
l Contains moisturizing and softening agents which avoiddrying out the skin.
l Contains antibacterial additives to avoid that the smallwounds done during the work time become infected.
l Its composition consists in a complex and completelybalanced mixture of organic deodorized solvents, anionic
and no-ionic surfactants and stabilizers, softeners, and
antibacterial agents.
INSTRUCTIONS OF USE
l It is recommended not to wet the hands before applyingthe product, considering that this could trickle and its
action would be reduced.
l Put a small quantity of product in the palm of the hand,and after being homogeneous dispersed, rub until you see
that all the dirt has been dissolved.
l Next, rinse with water until the total elimination of thegreases.
IT CAN BE APPLIED WITH A SPECIAL DISPENSER WHICH
WE WILL PROVIDE IN CASE IT IS DEMANDED, BEING
NECESSARY TO DILUTE IT IN WATER FOR VISCOSITY FIT-
TING, DEPENDING ON MODEL TO USE.
INDUSTRIAL DEGREASING
HAND-WASHDISOLMAN
APPLICATIONS
Presentation
B1
Ref. T1009
l 5 Kg. in box of 4 uds.
l 10 Kg. in box of 2 uds.
Special product with microspheres elaborated for
the hand washing in people that for their work, they
have them exposed to big quantities of grease, oils,
inks, and dirt in general.
Its use is especially recommended in
workshops, plumbing shops, printing
houses, shipyards, factories, ships,
mines, railways, and in general in all
those activities, in which is required a
deep cleaning action after having reali-
zed a work with oils and greases of engi-
nes.
PROPERTIES
l Pleasant fruity smell.
l The integrated microspheres in its formulation increaseexceptionally the power of dragging and cleaning.
l Posses a big degreasing power and emulsifier in gene-ral.
l Contains moisturizing and softening agents whichavoid drying out the skin.
l Contains antibacterial additives to avoid that the smallwounds done during the work time become infected.
l Its composition consists in a complex and completelybalanced mixture of organic deodorized solvents, anionic
and no-ionic surfactants and stabilizers, softeners, and
antibacterial agents.
INSTRUCTIONS OF USE
l It is recommended not to wet the hands before applyingthe product, considering that this could trickle and its
action would be reduced.
l Put a small quantity of product in the palm of the hand,and after being homogeneous dispersed, rub until you see
that all the dirt has been dissolved.
l Next, rinse with water until the total elimination of thegreases.
IT CAN BE APPLIED WITH A SPECIAL DISPENSER WHICH
WE WILL PROVIDE IN CASE IT IS DEMANDED, BEING
NECESSARY TO DILUTE IT IN WATER FOR VISCOSITY FIT-
TING, DEPENDING ON MODEL TO USE.
HAND-WASH WITH
MICROSPHERESDISOLMAN MICROESFERAS
APPLICATIONS
Presentation
B2
Ref. T1048
l 1 Kg. in box of 16 uds.
l 5 Kg. in box of 4 uds.
l 10 Kg. in box of 2 uds.
Viscose Gel with a high content in
active material, with softener and
protectors of the skin, what makes
the product to be ideal for people
who need a constant washing on
their hands.
Its use is especially recommended in
workshops, plumbing shops, printing
houses, shipyards, factories, ships,
mines, railways, etc.
In general, in all places where the use of
several objects and products, makes the
worker to wash his hands constantly,
and for this reason, it is necessary the
use of detergents which clean correctly
but also protect the hands of the wor-
kers.
PROPERTIES
l It does not contain solvents or any abrasive productwhich can provoke any type of dermatitis in people with
delicate skin.
l It contains ethoxylated lanolin which softens the handscreating a protective layer to protect the hand from the
products used in the everyday life.
l Posses a high versatility in its applications, as its formu-lation allows the attack of dirt in all types of industries and
markets.
l Its composition is very high in surfactants which attackand emulsify the grease and all type of dirt that could exist
in hands.
INSTRUCTIONS OF USE
l It is recommended not to wet the hands before applyingthe product, considering that this could trickle and its
action would be reduced.
l In those industries where the personnel do not havetheir hands exposed to big quantities of dirt, it could be
the product diluted in water, from the proportion of 1 part
of product in 1 part of water, to 1 part of product in 5 of
water.
l Put a small quantity of product in the palm of the hand,and after being homogeneous dispersed, rub until you see
that all the dirt has been dissolved.
IT CAN BE APPLIED WITH A SPECIAL DISPENSER WHICH
WE WILL PROVIDE IN CASE IT IS DEMANDED, BEING
NECESSARY TO DILUTE IT IN WATER FOR VISCOSITY FIT-
TING, DEPENDING ON MODEL TO USE.
HyDRATING AND SOFTENING
HAND GELGRASIN
APPLICATIONS
Presentation
B3
Ref. T1007
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Energetic dermatological hand-
wash, free of solvents, especially
formulated for the hand-washing
of mechanics, with an exceptional
degreasing power. Provides a
clean, pleasant and soft touch to
the hands treated with it.
It is helpful in all those places where an
energetic cleanliness of the hands with a
big degreasing power is requires, as in:
mechanic workshops, shipyards, mines,
printing houses, etc.
PROPERTIES
l Pleasant smell.
l Product formulated with a mixture of surfactants andfatty acids of coconut, inorganic salts, which provide an
excellent degreasing capacity and softener agents, which
provide the necessary softness that a hand-wash requires.
l It is not aggressive for the dermis, as it does not containsolvents.
l Posses an excellent miscible power of grease and dirt,eliminating them also from difficult parts to access or
where the grease is more adhered, as in the creases of the
hands, nails, fingers, etc.
l The continuous use of our dermatological hand-washprotects the dermis, not causing irritation not even in the
most sensitive hands.
l Is completely soluble in water, for this reason it is veryeasy to eliminate with a simple rinse with water, keeping
the hands soft.
INSTRUCTIONS OF USE
l It is used in pure state, as it is originally in the container,providing its maximum degreasing performance.
l If it is not necessary a big degreasing, it can be diluted inwater depending on the dilution of the viscosity that we
want to obtain, and the necessary degreasing power.
l Put a small quantity of product in the palm of the hand,and after being homogeneous dispersed, rub until you see
that all the dirt has been dissolved.
IT CAN BE APPLIED WITH A SPECIAL DISPENSER WHICH
WE WILL PROVIDE IN CASE IT IS DEMANDED, BEING
NECESSARY TO DILUTE IT IN WATER FOR VISCOSITY FIT-
TING, DEPENDING ON MODEL TO USE.
DERMATOLOGICAL HAND-WASHMANDER
APPLICATIONS
Presentation
B4
Ref. T1010
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Its use is especially recommended in
workshops, plumbing shops, printing
houses, shipyards, factories, ships,
mines, railways, and in general in all
those activities, in which is required a
deep cleaning action after having reali-
zed a work with oils and greases of engi-
nes.
PROPERTIES
l Posses a big degreasing power and emulsifier in gene-ral.
l Contains moisturizing and softening agents which avoiddrying out the skin.
l If a small quantity is applied on the clean skin, acts asprotector against the glue, grease and dirt in general.
l It does not dry out the skin and it does not cause anytype of irritation on it.
INSTRUCTIONS OF USE
l With the hands dry, Put a small quantity of product inthe palm of the hand, and after being homogeneous dis-
persed, rub until you see that all the dirt has been dissol-
ved.
l After that, rinse them with water until to eliminate thegrease.
l It is recommended not to wet the hands before appl-ying the product, considering that this could trickle and
its action would be reduced.
l If you want, it can be applied before starting to work.. Inthis case, put a tiny quantity of paste on the clean hands,
spread it on them as a cream, wait a few minutes, and
then work normally.
HAND-WASH PASTEMANILVA
APPLICATIONS
Presentation
B5
Ref. T1049
Industrial hand-wash
paste, especially for the
cleaning of the hands
working with greases,
burn oils, inks, etc.
l 10 Kg. in box of 2 uds.
Product formulated by a mixture
completely equilibrated of mineral
oils, special silicones, light
solvents and natural aromas,
which provide to the treated
surface a perfect cleaning and a
pleasant aroma.
l Cleaning of dashboards, bumpersand plastic materials.
l Workshops of washings and grea-sing.
l Car Dealers, car´s expositions, gara-ges, etc.
l Petrol stations.
l Rent a car.
l Urban bus lines and long-distancebuses.
PROPERTIES
l Increases the superficial elasticity of the treated objects.
l Postpones the process of premature hardness whichprovokes cracks and increases the fragility of the piece.
l Provides a light layer on the surface where it is applied,and it isolate from the dampness.
l Increases the sheen of the treated surface, and repelsthe action of the water and dust.
l Results economic and rentable due to its high perfor-mance.
l Provides a pleasant and long aroma.
INSTRUCTIONS OF USE
It can be used by spray or mop.
l Spraying: spray directly on the surface maintaining aseparation distance of at least 30 cm. After that, pass a
clean and dry mop to remove the dirt and to get sheen.
l Mopping: damp the clean and dry mop with BRISOL andrub softly. After that, pass a dry and clean mop to get
sheen.
Such by spray and mop, it is important do not use too
much product, as it will not provide a bigger cleaning, but
less performance and an oily finish to the treated surface.
DASHBOARD SHEENBRISOL
APPLICATIONS
Presentation
C1
Ref. T1008
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Product especially elaborated for
the treatment of the rubber and
gum. Cleans, restoring the original
aspect of objects and surfaces.
We recommend its use in the caring
and treatment of gum surfaces, as:
floors, tires, and various objects.
It is very useful in: workshops of
washing cars and lorries, car´s expo-
sitions, and all those places where
the care and maintenance of surfa-
ces and gum objects is required.
PROPERTIES
l It is a hydroalcoholic dissolution of special polyols forthe caring and maintenance of the rubber and the gum in
general.
l It does not attack to the gum in its exterior part, and itdoes not produce migrations in its interior.
l When it is applied on tires, it produces an intense blackcolor without sheen, giving to it back its original aspect.
l When it is applied on floors and various objects, condi-tioning the materials and restores the colors of them.
INSTRUCTIONS OF USE
l It can use as it is in the container or diluted in water witha dilution of 3 parts of product in 1 of water.
l The way of use can be: spray, mop or by immersion,when we want to condition pieces of irregular pieces.
l When the surface to treat presents an elevated dirt, it isvery convenient a wash and clarified before applying the
treatment with the conditioner of gum.
RUBBER CONDITIONERCONDIGON
APPLICATIONS
Presentation
C2
Ref. T1032
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Viscous and concentrated
detergent with a high foam power,
developed especially for the wash
of automobiles such in trains of
automatic washings as manual
way.
l Garages, workshops of washesand greasing, car´s dealer.
l Rent a car.
l Town halls, automobile parks,transport agencies, etc.
PROPERTIES
l Possesses a high detergent and moisturizing power dueto its high contain in anionic and non-ionic surfactants.
l Acts very quickly and efficiently against the commondirt and grease spots.
l It is easy to apply and dissolution.
l It does not irritate the skin or the mucous.
l Possesses a high concentration in active material and ahigh foam power.
INSTRUCTIONS OF USE
1. Manual washing:
l The dosage can vary between 30 and 50 gr of productper 10 liters of water, depending on the dirt of the vehicle.
l Once the dilution is done, proceed to moisturize withwater the vehicle, and later rub softly with a sponge or
mop impregnated in the dissolution of the product.
l Last, rinse all the surface with pressure water.
2. In automatic carwashes:
l It is convenient to follow the instructions of the manu-facturer of the machine, taking always as orientation the
dosage before mentioned.
l For a complete treatment of the bodywork, we recom-mend to use our car wax CERA-CAR as finish.
BIODEGRADABLE CAR DETERGENTDETER-AUTO
APPLICATIONS
Presentation
C3
Ref. T1005
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Complex and completely
equilibrated mixture of surfactants
especially elaborated for the
cleaning of bodyworks of
automobiles with high power of
detergency and apt for being
used, both in manual wash and
automatic wash.
l Garages, washing and greasingworkshops, car´s dealers.
l Town halls, automobiles parks,transport agencies.
l Rent a car.
PROPERTIES
l Possesses a high power of detergency and moisturizingdue to its high contain in anionic and non ionic surfac-
tants. Its use results rentable and economic.
l Contains complex agents of calcium and magnesiumionic, providing a quick wrung of the water of the rinse,
due to the hardness of the water.
l Acts very quickly and with high efficiency against thecommon dirt and sports of greases.
l It is easy to dilute and apply. It is not affected by thehardness of the water, and it can be used even with salty
waters.
l It does not irritate the skin or the mucous.
l Possesses a high concentration in active material and ahigh foam power.
INSTRUCTIONS OF USE
Due to its high concentration in active material, admits
high dilutions, getting always an optimal result.
1. Manual washing:
l The dosage can vary between 30 and 50 gr of productper 10 liters of water, depending on the dirt of the vehicle.
l Once the dilution is done, proceed to moisturize withwater the vehicle, and later rub softly with a sponge or
mop impregnated in the dissolution of the product.
l Last, rinse all the surface with pressure water.
2. In automatic carwashes:
l It is convenient to follow the instructions of the manu-facturer of the machine, taking always as orientation the
dosage before mentioned.
For a complete treatment of the bodywork, we recom-
mend to use our car wax CERA-CAR as finish.
CONCENTRATED BIODEGRADABLE
BODyWORk SHAMPOODETER-CAR
APPLICATIONS
Presentation
C4
Ref. T1003
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Due to its characteristics of high
cleaning and degreasing power
and small foam power, is the ideal
detergent for the cleaning of
automobiles in automobile
facilities, where it is needed a
quick and easy dry.
l Washing and greasing stations.
l Automobile parks.
l Transport companies and rent ofautomobiles.
l Official services and car´s dealers.
l Rent a car.
PROPERTIES
l Possesses a high detergent and degreasing power dueto its equilibrated mixture of ionic and non-ionic surfac-
tants.
l Possesses a low foaming, allowing a quick rinse.
l Its consistence is not viscous to facilitate its dosage anddissolution.
l Possesses low alkalinity, enough to get a high degrea-sing power, without resulting aggressive for the paints.
l Possesses sequenstrant agents to eliminate the negati-ve effect of the calcareous salts on the hard waters.
l Contains moisturizer rising agents, which reduce in a50% the later consumption of wax for cars.
INSTRUCTIONS OF USE
l We recommend as general regulation to follow in all themoments the instructions of the manufacturer of the
machine.
l As illustrative dosage, we recommend a dosage appro-ximately of 20-25cc of product in 20 liters.
CAR WASH
LIQUID DETERGENTDETERQUID
APPLICATIONS
Presentation
C5
Ref. T1021
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Cleaner of mosquitos and all
types of insects in general for the
automobile.
Complex mixture completely
equilibrated of surfactants,
dispersants and solubilizers which
guarantee completely the
moisturizing
l Workshops of washings and grea-sing.
l Transports companies.
l Automobile parks.
l Rent a car.
PROPERTIES
l High power of removing.
l High power of moisturizing.
l High performance.
l Elevated emulsion and cleaner powers.
INSTRUCTIONS OF USE
l Use always diluted in water: 1 part of product per 10 ofwater.
l Never use it pure state.
l The operation of cleaning never must pass 2 minutes.
WORKBODY CLEANING:
l Apply always with the sheet cold, being the automobilein the shade.
l First wet the place to treat with water.
l Apply the dilute product (1 part of product per 10 ofwater) by mop or with a sponge, with circle movements in
the direction of clockwise.
l Later, rinse with abundant water.
CLEANING OF ALLOY RIMS:
l Apply the dilute product (1 part of product per 10 ofwater) spray the rims, and quickly rinse with abundant
water.
l Extreme the precautions on the stickers of fiber andplastic materials.
CAR INSECT CLEANERRAPID
APPLICATIONS
Presentation
C6
Ref. T1046
l 1L in box of 20 uds.
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Concentrated emulsion of
selected waxes especially for the
protection of the bodywork of the
automobiles from the attack of the
aggressive atmospheric agents
as: sun, damp, rain, dust,
etc…providing them sheen and
durability.
It is recommended its use in automatic
and manual washing. Garages, military
bases, municipalities, car parks, rail-
ways, aviation, transport companies and
car rentals, etc.
PROPERTIES
l Contains in its formulation moisturizing and emulsifiableagents which provide the contact and distribution of the
product in a homogeneous way in all the places of the
vehicle, decreasing the superficial tension and facilitating
its application.
l In contrast to solid waxes, this provides a better andeasily application.
l It is not necessary to get sheen with a mop.
l Acts leaving a micro-layer on the bodywork which remo-ve the water and dirt.
l Facilitates the dry and wrung of the automobile.
l The continuous use of our wax, keeps the sheen of thevehicle as the first day.
INSTRUCTIONS OF USE
The product is supplied in a high grade of concentration,
so that we recommend for its application to dilute it in
water.
l MANUAL WAXED:The quantity of product to use is 1 part of product per 10 of
water
l AUTOMATIC MACHINES OF WAHING:The quantity to use of product will depend on the characte-
ristics of the machine used. In general, it is recommended 1
liter of product per 50-100 of water.
CAR WAXCERA-CAR
APPLICATIONS
Presentation
C7
Ref. T1002
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Combination of acids perfectly
neutralized with special alkalis,
passivatings, antistatic
dispersant, cationic surfactants,
which make it, being the
auto-removing detergent par
excellence.
We recommend the use of our auto-
removing detergent product in the clea-
ning of:
l Lorries, tractors, carriages of trains,machines of manufacturing, etc.
l In general, our product is very usefulin all those surfaces where there is
embedded dirt, with difficulty to clean.
PROPERTIES
l Clean and descales difficult surfaces with the minimumeffort.
l It does not damage the materials, not even the delicateas the aluminum.
l It does not harm, not even make yellowish the paintsapplied on the metals.
l Its pH is lightly alkaline securing the degreasing andcleaning power of the same.
l Possesses anti-corrosives and anti-static additives,which make that the treated surface does not corrode, and
remove the dust and dirt during a long period.
INSTRUCTIONS OF USE
l Due to its high concentration in active material, it candilute from 1 part of product per 3 parts of water until 1 part
of product per 15 of water, depending on the dirt of the sur-
face to treat.
l If the surface is excessively embedded of dirt, the pro-duct can be applied in pure state.
l Once the product is diluted, or in pure state, spray onthe surface with 15 or 20 cm of distance, leave to act
during a few minutes, and proceed to rinse with a stream
of water.
ANTI-STATIC-DISOLVING DETERGENTBEDAR
APPLICATIONS
Presentation
C8
Ref. T1043
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Lithium grease of universal
use which incorporates
anti-corrosive additives,
antioxidants, hydrofugants
and reducing agents of
slipping.
l AUTOMOTIVE:
Electric brakes, gears box, water bomb,
wheels, etc.
l INDUSTRY:
Electric engines, rollers, lift cranes, etc.
l PUBLIC WORKS:
Conveyor belts, bulldozers, tractors,
dumpers, etc.
PROPERTIES
l Its service temperature is between -35ºC and 135ºC.
l Possess an excellent pumpability for applying with aspray gun and centralized greasing.
l Posses an excellent adhesion with all types of metals
l Posses a big resistance to water.
INSTRUCTIONS OF USE
The product is served ready for its application, this can be:
l By brushing
l Injection with plastic gun.
LITHIUM GREASEREVILUB
APPLICATIONS
Presentation
D1
Ref. T1025
l 5 Kg. in box of 4 uds.
Synthetic Grease with drop point
lacking, with a very low volatility
and with total absence of
carbonaceous residues.
l Lubrication of bearings submitted to
high temperatures as in drier of waste-
paper baskets, textiles and in canning
industry.
l In the steel Industry for lubricate
lamination trains.
l In the Plastic industry for the molding
machinery, Fans, Extractors, and Food
Chains of Industrial Ovens.
PROPERTIES
l Temperatures of service with a ranging from -35 and200ºC in continuous, and in tips of 250ºC.
l Contains additives of Extreme Pressure.
l Posses a big reversibility and length due to its highantioxidant and anticorrosive power.
l It does not possess a drop point, so that it does not suf-fer a wearing out with the time.
l It does not attack to natural or synthetic gums.
lMaintain in perfect state the
INSTRUCTIONS OF USE
The product is served ready for its application, this can be:
l By brushing
l Injection with plastic gun.
HIGH TEMPERATURE
LITHIUM GREASEREVILUB-AT
APPLICATIONS
Presentation
D2
Ref. T1030
l 5 Kg. in box of 4 uds.
Lithium Grease universal
semi-synthetic developed to
satisfy the most severe services
in the automotive Industry.
Lubrication of mechanisms submitted to
gliding, vibrations or high loads, as: all
types of bearings, articulations, row-
locks, spreaders, electric engines and
axle boxes.
PROPERTIES
l Temperatures of service with a ranging from -35 and150ºC
l In its formulation it contains antioxidant and anticorrosi-ve additives, and Metal passivators.
l Contains additives of Extreme Pressure.
l Posses a high lubricant power due to the stratified struc-ture of the molybdenum disulphide.
l High drop point.
l Excellent adherence to metals.
l High resistance to water.
INSTRUCTIONS OF USE
The product is served ready for its application, this can be:
l By brushing
l Injection with plastic gun.
EXTREME PRESSURE MOLyBDENITE
LITHIUM GREASEREVILUB-E.P.
APPLICATIONS
Presentation
D3
Ref. T1026
l 5 Kg. in box of 4 uds.
Product especially to lubricate
bottling chains and packaging.
Especially formulated to benefit
the dragging of the containers,
avoiding the retention of them,
and increasing on this way the
efficiency of the production.
We recommend its usage in all those
facilities which use a high quantity of
glass, plastic or tin-plate containers as in:
Beer, soft drinks, carbonic drinks, juices,
mineral waters, canned food factories,
etc.
In general, in those factories where their
container section, it is wanted to get in
their conveyor belt a high efficiency with
a minimum low cost of maintenance.
PROPERTIES
l Lubricates the surfaces of the containers which are incontact with the conveyor belt, facilitating the dragging,
and avoiding obstructions.
l Cleans and lubricates the conveyor belt, reduces therubbing of the gears and moving parts, decreasing the
consumption of electric energy.
l Increase the performance of the transport system.
l It does not produce scales.
l It does not stain the chains, either the bottom of thebottles/containers.
INSTRUCTIONS OF USE
l The application of the product can be done by immer-sion and by spraying.
l Due to the high concentration that our Lubricant forPackaging posses, we recommend its usage diluted in
water.
l The dilution to do, it will depend on several factors as:hardness of the water, size of the container, speed of the
conveyor belt, etc.
l As guide dosage, it is recommended to use concentra-tions between 10 and 30 gram of product for each liter of
water.
LUBRICANT FOR
PACkAGING LINESLUBRICAD
APPLICATIONS
Presentation
D4
Ref. T1041
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Synthetic lubricant of high
benefits which contains
micronized, colorless and
water- repellent PTFE.
It allows the lubrication of
mechanisms, cables, chains,
rollers, etc, decreasing the friction
between surfaces, increasing the
resistance to the abrasion.
Synthetic lubricant for long length
greasing in motorbikes, bikes, bea-
rings, open gears, cables, pulleys,
etc.
l Very useful in all types of industries,repair workshops, bikes, garages, car
repairs, heavy machinery and public
works, etc.
l Lubrication of all types of mecha-nisms, lockers, etc., in workshops,
ships, naval companies, etc.
PROPERTIES
l Suitable for using in the Food Industry in the protectionof humidity, lubrication and greasing of food equipments
which are not in contact with foods, (conveyor belts,
rollers, drive chains, cables, etc).
l Contains stringy fat and synthetic additives of PTFE(polytetrafluoroethylene, Teflon®, Register Brand of
DuPont)
l Big chemical resistance: It is not affected by the acid,alkali, hydrocarbon or abrasive actions.
l Long duration adherence, it does not produce drippingin the applications in stop chains, improving its lubrication
and useful life.
l Insoluble in water. Isolates the treated pieces of theaction of humidity and corrosion.
l Penetrates quickly until the cable core, bearings, chainlinks, etc, providing a longer lubrication.
l Stable in an interval of work temperatures between -20ºC and 120ºC. Resist the action of the cold and hot action.
l It can be applied in internal and external places, allowingstand some works with high tensions.
l Protects without stain, repelling the powder and humi-dity, with durability properties four times superior to con-
ventional lubricants.
l Product packed in aerosol with propellent non-pollutingof the ozone layer.
INSTRUCTIONS OF USE
Shake it before using it:
Spraying directly on the surface to treat with 20cm of dis-
tance, with short blasts.
Once the application is finished, invert the aerosol and
do some sprayings to clean the valve.
SyNTHETIC GREASE WITH PTFEREVIFLON
APPLICATIONS
Presentation
D5
Ref. T1052
l Aerosol 400 cc In box of 12 uds.
Anti-seize compound based on the aluminum
grease, in aerosol, tough to high temperatures
(up to 800ºC), specific for the protection of
antioxidant of anchor pins asparagus, screws of
ships, pots, etc, with excellent hermetic properties.
Facilitates the dismantling of pieces submitted to
long periods without maintenance.
l Anticorrosive protection of grippersfor bricks in gripping mechanisms
ovens input, mobile elements, in mari-
ne cables of cranes exposed to salt
fog, etc.
l In pots and vapor facilities as moun-ting paste and sealer of long useful life,
deep drawings paste, etc.
l Lubricates and improve the perfor-mance of guides and bearings submit-
ted to conditions of extreme pressure
so that its usage is very useful in big
doors, conveyor belts, lubrication of
trial motorcycles chain, SUV, etc.
PROPERTIES
Allows the assembly and dismantling of heavy pieces, recti-
fied in cold screws, bolts, asparagus, etc.
It is applied in the engine seal, connection of pneumatic cir-
cuits, the lubrication of threads, railways, heavy machinery,
etc.
l Aluminum grease in aerosol, of easy application.
l Protects from the corrosion and seize for atmosphericagents, humidity, chemical agents, etc.
l Allows the protection of metallic surfaces against theaction of salt fog, facilitating the dismantling after several
inactivity periods.
l It can be used in strict work conditions. Allow supportingtemperatures of work from -30ºC to 600ºC, with work tip of
800ºC.
l Product packing in aerosol with propellent no-pollutingof the ozone layer.
l Easy application. It usage allows to cut down the worktimes of maintenance, reducing costs of manpower.
l Applicable in industrial and institutional maintenancecontracts, building companies, industrial machinery repa-
ration, heavy naval machinery, railways, public works, etc.
INSTRUCTIONS OF USE
Before applying the product clean the surface to treat from
grease and rust. Shake well before using it.
Spraying directly on the surface to treat with a distance of
20-25cm, in short bursts. Once the application is finished
invert the aerosol and push the button to clean the exit
valve.
ALUMINUM-BASED ANTI-SEIZE
LUBRICANTREVIGRIP-AL
APPLICATIONS
Presentation
D6
Ref. T1054
l Aerosol 400 cc in box of 12 uds.
Dry lubricant with high
duration based on
bisulphide and molybdenum.
It is used in lubrications of chains and
open gears, guides, screws, cables, etc.
l Protects from the corrosion, arms,machinery, pieces during the storage,
etc.
l Big useful in all kind of workshopsand industries, heavy machinery, ships,
railways, etc.
PROPERTIES
l Provides a lubricant layer of big benefits, tough to extre-me pressure, continuous loadings and big changes of
temperature reducing the friction coefficient.
l Provides layers completely dries with big adherencewhich does not stain and cannot be eliminate in conti-
nuous.
l The treated surfaces and mechanisms, are toughed tothe projections, dirt and work residues.
l Protects from the corrosion the treated metallic pieces.
l Facilitates the slipping between the mobile pieces, redu-cing the coefficient of friction and wearing out.
l Product packing in aerosol with propellent no-pollutingof the ozone layer.
INSTRUCTIONS OF USE
Shake it before use it.
Spraying directly on the surface to treat, 20cm far from it,
in shorts bursts. Once the application is finished invert the
aerosol and do several sprayers to clean the valve.
MOLyBDENUM BISULPHATE
DRy LUBRICANTREVIMOL
APPLICATIONS
Presentation
D7
Ref. T1056
l Aerosol 400 cc in box of12 uds.
Colorless synthetic grease,
slightly stringy, non-toxic, specific
for the lubrication of machineries,
mobile parts, gears, etc, in the
food Industry.
l Allows the maintenance of machi-nery, axle boxes and in general in all
kind of gear systems that requires a
long duration.
l It is used in the lubrication of machi-neries of the meet industry, bakeries,
milk factories, soft drinks companies,
canning industry, etc.
l Big useful in all types of applicationsthat require a grease with big adheren-
ce, colorless, that requires non-toxic
properties.
PROPERTIES
It is used in lubrications and greasing of chains and open
gears, guides, screws, conveyor belts, etc, of machineries in
contact with food.
l Excellent behavior in low and high temperatures.
l Provides a lubricated layer of greases benefits, resistantto the humidity, contact with water, acids and alkalis.
l Protects from the corrosion and oxidation.
l Facilitates the slipping between the mobile pieces, redu-cing the coefficient of friction and wearing out.
l It can be in indirect contact with food during its elabora-tion (Rule H1)
l Product packing in aerosol with propellent no-pollutingof the ozone layer.
INSTRUCTIONS OF USE
Shake it before use it.
Spraying directly on the surface to treat, 20cm far from it,
in shorts bursts. Once the application is finished invert
the aerosol and do several sprayers to clean the valve.
NON-TOXIC COLORLESS GREA-
SE FOR THE FOOD INDUSTRyALIREV
APPLICATIONS
Presentation
D8
Ref. H10104
l Aerosol 400 cc in box of 12 uds.
Decarboniser based on a
formulation which eliminates the
grease and the coal dust from
carburetors and metallic pieces in
general in a practical and effective
form.
l Mechanic workshops, motorcyclesworkshops, etc.
l Shipyards, Naval industry.
l Maintenance equipments in all typesof factories, etc.
PROPERTIES
l Product in only one component based on a complexmixture of surfactants and special solvents biodegradable.
l Descarbonises and descales in only one application.
l Non-corrosive formulation.
l Product no flammable.
l Its actuation is based on a progressive debilitation of theparticles of coat dust until getting the crumbling of all car-
bonaceous structures, removing all the incrustations of
grease, mud, oil, paints, etc.
INSTRUCTIONS OF USE
l The product is served ready for its use. It mustn´t be dilu-ted or heated up.
l The pieces to decarbonise and at the same time to des-cale, must be immersed completely in the pure product
with the help of a metallic basket which is facilitated by
demand.
l The immersion time depends on the type of piece andthe dirt it has. As illustration, we recommend:
l Carburetor: 2 hours approximately.
l Greasing pieces, as: piston, cylinder heads, etc, whichcan need more immersion time to be completely clean.
l After taking the pieces out from the deposit, it is recom-mended to rinse with pressure water and dry with the air to
prevent possible oxidations.
l It is important that the recipient which contains the pie-ces to decarbonise is completely close, on the contrary,
the volatiles components could be lost by evaporation,
and the product could be less effective.
SPECIAL DECARBONISER FOR
WORkSHOPSCARBOZAN
APPLICATIONS
Presentation
E1
Ref. T1028
Additive of orgometallic nature
that improves the energetic
capacity and the rest of the
properties of the diesel fuel.
l Burners of pots, ovens, etc.
l Shipyards, town halls, service sta-
tions, etc.
l Bus companies, tractors, lorry, taxi
companies, etc.
PROPERTIES
l Maintains in dispersion the impurities, avoiding the obs-truction of the injector filters.
l Mix the rest of humidity which bother for a perfect com-bustion.
l Reduces the formation of sulfuric acid, avoiding in mostparts the corrosion that this normally produces.
l Due to the previous points, the combustion is improved,getting an economy of the fuel around 3-5%.
l Reduces the emission of ashes and smokes.
INSTRUCTIONS OF USE
The dosage must be done preferably on empty deposits or
with diesel oil.
Add the additive in the correct proportion each time that
petrol fillings are done.
l First dosage: 2-3 liters for 1000 liters of diesel oil.The first dosage must be the same during the two first
weeks, in order to get that the facilities get the best result.
l Maintenance dosage: 1 liter of product for 1000 liter ofdiesel oil.
DIESEL ADDITIVESOLI-GAS
APPLICATIONS
Presentation
F1
Ref. T1016
l 1 L. in box of 12uds.
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Additive which neutralizes the
harmful action of a series of
strange materials which normally
contains the fuel-oil, that when it
rusts in presence of the
atmospheric oxygen produce
corrosions, obstructions and in
general a combustion not much
efficient.
l Reduce of soot
l Avoid sedimentation
l Maintain the circuits cleaner
l Increase the performance in thecombustion
l Reduce the corrosion
PROPERTIES
1. STRANGE MATERIAL: WATER
Water is deposited on the button of the tank, reducing
its capacity. Rusts and provokes the appearance of non-
organic acids which produce problems of corrosion on
the walls. l The addition of SOLI-FUEL, mixes andscatters the water stopping the formation of acids and
reducing the oxidation in general.
2.STRANGE MATERIAL: SULFUR
The sulfuric acid produced in appearance of the oxygen
and humidity of the environment attack to the walls by
corrosion.
This effect occurs especially with low temperatures.
l With the addition of SOLI-FUEL, it is reached quicklyhigh temperatures, avoiding on this way the corrosion.
3. STRANGE MATERIAL: VANADIUM
The vanadium salts are deposited on the walls provoking
corrosion in high temperatures.
l With the addition of SOLI-FUEL, is adjusted theexcess of air, reducing the formation of vanadium oxi-
des and also the vanadium corrosive salts.
4. STRANGE MATERIAL: HALOGENS (FLUORIDE, CHLORI-
NE, ETC)
These elements react with water producing the hydrochlo-
ric, etc, which debilitate the metallic surfaces.
l The addition of SOLI-FUEL, does that the anticorro-sive agents that include in its formulation, protect the
metallic parts of its attack.
5. STRANGE MATERIAL: ORGANIC MUDS
Formation of residues in the button which obstruct and
complicates the composition.
l With the additive of SOLI-FUEL, the organic particlesare dissolved, it is cleaned the channeling and it is impe-
ded that the volume of the tank decreases, increasing,
the combustion of the performance.
INSTRUCTIONS OF USE
1. First dosage:
1 Lt of product for each 1000 Lt of Fuel-oil.
2. Maintenance dosage:
1 Lt of product for each 4000 Lt of Fuel-oil
Normally is advisable to add the additive before the Fuel-
oil.
FUEL-OIL ADDITIVESOLI-FUEL
APPLICATIONS
Presentation
F2
Ref. T1015
l 5 L. in box of 4 uds.
Complex and completely
equilibrated mix of mineral refined
oils coming from distilled of the
petroleum with additives of middle
and extreme pressure.
It is recommended in all types of
metal mechanical where it is
needed a refrigeration and high
quality lubrication.
We recommend its use in:
l Grinding and drilling workshops.
l Turning and milling workshops.
l Metallic carpentry workshops.
l Maintenance industries
in general.
PROPERTIES
l Reduces the heat in the tools producing smooth opera-tions and without burrs.
l Allows working with high velocities improving the qualityof the finished of the piece.
l Contains, in a very high concentration, inhibiting additi-ves of corrosion.
l It is recommended its use for all types of mechanical:milling, turning, drilling, etc.
INSTRUCTIONS OF USE
l The traditional way to use the cutting oils is without dilu-ting or mixing, for all types of works where big quantities
are required.
l For less heavy cases, the product ca ne mixed withwater in proportions of 1 part of product for 15 of water, or 1
part of product for 25 of water. The way to mix the product
is adding the corresponding part of product to the water,
and not the opposite.
l It is very important to clean and disinfect the circuitseach time that the refrigerant is changed, for this, use our
BACTERI-FUN with a dilution of 1 part of product for 10
parts of water, with the purpose of eliminating all the bac-
teria and avoid the contagion of fungus or dermatitis.
REFRIGERANT CUTTING OILACECOR
APPLICATIONS
Presentation
G1
Ref. T1027
l 1 L. in box of 12uds.
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Synthetic lubricant to use in all
mechanical of metals operations,
as refrigerant fluid and lubricant
of worked pieces in: drills, lathes
and mills.
l Mechanic and reformation of
steel pieces of the carbon, alloy
steel, foundry, etc workshops.
l Works of aluminum, cooper,
bronze, brass,, etc materials.
l Turning and milling workshops.
PROPERTIES
l Refrigerates and lubricates at the same time, mobileparts of the pieces, without blunting or dilating.
l Is completely transparent, for this, allows following in allmoments the evolution of all mechanized.
l Is very stable in a big range of temperatures, not produ-cing to it a descomposition.
l Does not contain niters, so that it does not produce der-matitis or allergies.
l Allows high dilutions, including in hardness of water.
INSTRUCTIONS OF USE
Concentrations in water will depend on the mechanized
work to do.
l REFORMATION, DRILLING AND DRILLING……………5% in water.
l OUTLINED, SAWING, MILLING AND TAPPING……10% in water.
l It is very important to clean and disinfect the circuitseach time that the refrigerant is changed, for this, use our
BACTERI-FUN with a dilution of 1 part of product for 10
parts of water, with the purpose of eliminating all the bac-
teria and avoid the contagion of fungus or dermatitis.
GREEN LUBRICANT
(REFRIGERANT)TALAVER
APPLICATIONS
Presentation
G2
Ref. T1014
l 1L in box of 20 uds.
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Miscible cutting oil in water with a
high refrigerant power for the
mechanized of metals in general,
such ferrous, as non ferrous.
lWorkshops in general.
lMetallic carpentry.
l Locksmith trades.
l Sheet workshops.
.
PROPERTIES
l Possesses a good stability with the changes of tempera-tures. It is stable with any temperatures.
l With the water, it turns into an emulsion of white palecolor with high stability, including in hard waters.
l Is exempt of niter.
l Does not produce foam.
l Is easy to apply.
INSTRUCTIONS OF USE
Prepare the emulsion always adding the cutting oil on the
water by shaking, and never on the contrary way.
The concentration of the emulsion will change depending
on the work to do.
As guide dosage, and according to our work, we recom-
mend the following quantities of product:
TURNING AND DRILLING................................ 5%
GENERAL MECHANISING........................... 3-5%
MILLING..................................................... 5-10%
l It is very important to clean and disinfect the circuitseach time that the refrigerant is changed, for this, use our
BACTERI-FUN with a dilution of 1 part of product for 10
parts of water, with the purpose of eliminating all the bac-
teria and avoid the contagion of fungus or dermatitis.
MISCIBLE WHITE
LUBRICANTTALAVER BLANCA
APPLICATIONS
Presentation
G3
Ref. T1036
l 1 L. in box of 12uds.
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Dielectric degreasing and especial
security solvent for the metallic
cleaning, engines and electric
equipments of alternate current,
which does not leave residues
when it is applied in circuits and
electric panels board.
Its use is especially indicated in the
cleaning and degreasing of tools of
high pressure, clock’s pieces, air-
conditioned machines, gears, engi-
nes and equipments of bottling
plants, etc.
PROPERTIES
l It is not corrosive, and it does not damage the surfacesof the circuits, the isolation of waterproofing or ceramic,
being inert with metals.
l With its use, the risk of the formation of short-circuitsdismiss, on the electric equipments where it is applied, eli-
minating all types of greases, oil and humidity, letting a
total cleaning, leaving the surface covered of a antistatic
layer.
l Ideal for the cleaning of engines and equipments ofalternate current, being capable of applying the product
when the equipment is working. For its use in continuous
current circuits, it is necessary that they are without ten-
sion.
l It can be also used for the elimination of grease spots infabric clothing and upholsters.
INSTRUCTIONS OF USE
l It is used pure as it is in the container.
l It can be applied by immersion, brushing, or spraying,waiting a few minutes in order to the greases come off
drying later with air by pressure or with a dry cloth which
does not come off dusts.
l In the cleaning of electrical panels boards is recommen-dable do previous proofs to verify the resistance of the
components of the existing plastics materials. Later, use
our sealant product VENTILEC.
DIELECTRIC SOLVENTSOLCUAR
APPLICATIONS
Presentation
H1
Ref. T1020
l 5 L. in box of 4 uds.
l 10L. in box of 2 uds.
Electrical circuit anti-moisture
which is used for the protection of
electric circuits for the corrosion,
action of the atmospheric agents
and derivations produced by
parasitic currents, keeping the
equipment in perfect working
conditions, including after long
inactivity periods.
It is used with success in the protection
against humidity, dust, and rust of elec-
tric panels, telegraph, open engines,
dynamos, cables, electric circuits, televi-
sion, radio, telephones, etc.
PROPERTIES
l Possesses a hydrophobic character, leaves completelybare the humidity introducing in all types of cracks inclu-
ding the most hidden parts, evicting the water and elimina-
ting the derivations.
l Possesses antioxidant agents which lubricate the piecesand cover them with a thin layer which will absorb the dust,
eliminating the freights and working with an excellent anti-
parasitic.
l It does not attack to the paint, and it does not dissolvethe varnish, being inert to a big amount of lacquers and
elastics.
l Improve the conductivity of the circuit, allowing to get ahigher performance, with a lower maintenance.
l Highly de-greasing, eliminates by dissolution the greaseand dirt most embedded, protecting the electric equipment
from the dust accumulated which damage the connec-
tions.
INSTRUCTIONS OF USE
l It is used pure as it is in the container.
l It is recommended to apply in cold. The application canbe spraying, brushing, or by immersion of the piece we
want to treat.
ELECTRICAL CIRCUIT ANTI-
MOISTURE PROTECTIONVENTILEC
APPLICATIONS
Presentation
H2
Ref. T1001
l Aerosol in box of 12 uds.
l 5 L. in box of 4 uds.
l 10L. in box of 2 uds.
Product elaborated especially
for the elimination of the
protector layers of coating
adhered which contains almost
all new vehicles.
Our copolymeric paraffin remover
is very useful in:
l Washing of cars.
l Car´s dealer.
PROPERTIES
l Formulation specific for the elimination of the coating ofcopolymeric type.
l Used in an appropriate way, as it is indicated in its labeland technical sheet, it does not damage paints, adhesives,
gums, etc.
l High concentrated product, it is not convenient to use itin higher proportion that the one indicated in its documen-
tation, as you will not get better results but a worst perfor-
mance.
l Product which meets the regulations about biodegrada-bility.
INSTRUCTIONS OF USE
It is recommended, for getting an optimal result, the follo-
wing steps:
1. Proceed o rinse all the vehicle with hot water.
2. Dilute the product to the 50% in water. Apply carefully in
all the surface of the vehicle with a mop or sponge which
does not have solid particles which can grate the paint. It
can also be applied by spray.
Leave to act during 5 or 7 minutes, at last proceed to its eli-
mination with pressure water.
COPOLyMERIC PARAFFIN REMOVERFINADOR
APPLICATIONS
Presentation
I1
Ref. T1038
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Complex and completely
equilibrated mixture of solvents
especially apt for the elimination,
by dissolution of all types of
paraffines and waxes in the
cleaning of bodyworks of cars,
vessels of recreation, official
services, etc.
The use of our paraffin cleaner is
very useful in: automobiles factories,
automobile parks, service stations,
garages, etc, and in all those places
where it is required the elimination of
waxes and paraffines.
PROPERTIES
l In its formulation contains tensioactives agents whichare emulsifier of the grease and dirt which facilitate the
operation of cleaning, and allows its removing with an
easy rinse with water.
l It does not damage the paint finishes, and it does notattack the gums.
l The treated surfaces with our eliminator of paraffinsresist during more time the redeposition of the dust and
dirt, avoiding their incrustation and maintaining the surfa-
ce softer.
l It is not an alkaline product, it does not present corro-sion or oxidation problems of surfaces without protection.
INSTRUCTIONS OF USE
It is used as it is in its container.
It can be applied by sprinkling, spraying or moping.
l Spray or sprinkle: spread the product homogenously inall the surface to treat, leave to act during 30 or 60
seconds. After that, proceed to eliminate the residues
with a simple rinse by hand or with pressure water.
l Mopping: it is recommended to damp the mop or spon-ge in the product, apply it lightly on the surface, leaving to
pass 30 or 60 seconds before rinse with pressure water.
PARAFFIN CLEANERPARFIN
APPLICATIONS
Presentation
I2
Ref. T1006
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Product eliminator of paraffines
special for being used in vapor
machines. When it is mixed with hot
pressure water, the action des-
paraffin gets its maximum power
getting the elimination of the
protector layer of the vehicle in an
easy, rentable and quick operation.
l Car´s dealer.
l Sheet and paint workshops.
l Car washes stations.
PROPERTIES
l Complex formulation based on paraffines solvents withhigh molecular weight and high des-paraffin action.
l Contains additives which improve the penetrating actionof the product, favoring its functioning.
l Product high concentrated, allows mixtures until the 2-3% in hot water.
l It does not increase the viscosity and it does not produ-ce obstructions when it is mixed with water in vapor
machines.
l It does not damage paints or sheets or gums.
l Special formulation for eliminating the traditional paraf-fines.
l It can be used also by hand, as a normal des-paraffin.
INSTRUCTIONS OF USE
For an optimal performance and result, we recommend
the following steps.
l Proceed to rinse the vehicle with hot water.
l Apply the des-paraffin with a pressure machine, using adosage approximate to 2-3% in water, with a temperature
until 90ºC.
l Eliminate the excess of residues with hot water or use awashing tunnel.
SPECIAL STEAM-CLEANER
PARAFFIN REMOVERPARFIN-P
APPLICATIONS
Presentation
I3
Ref. T1037
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Reduces considerably the freezing
point of the refrigerant water of
the engines of internal
combustion getting the
temperatures -20º and 30ºC.
Our anti-freeze can be used for closed
circuits of refrigeration of automobiles
and heavy machinery.
It can be used in any model of car and
type of engine.
PROPERTIES
l Protect the engine when extreme temperatures exist.
l Guarantee the non-freezing of the water in temperaturesof -20 and 30ºC.
l It does not produce foam.
l Avoid the formation of calcareous incrustations, as itcontains complexing additives.
l Non-flammable.
l Non- residues regenerate.
l Its content in corrosion inhibitors reduces considerablythe oxidation in the circuit of refrigeration.
INSTRUCTIONS OF USE
Empty the content from the refrigeration circuit.
-Add the anti-freeze diluted according to the dosage table,
depending on the wished descent of temperature of free-
zing for the existing atmospheric conditions.
-Confirm periodically the level of the circuit, and in case of
having to add water, do it also with the proportional part of
anti-freeze according to the dosage table.
CLOSED CIRCUIT REFRIGERANT
ANTI-FREEZERC-90
APPLICATIONS
Presentation
J1
Ref. T1039
DOSAGE TABLE
% PRODUCT FREEZING TEMPERATURE
25% - 10ºC
35% - 20ºC
50% - 30ºC
l 5L in box of 4 uds.
l 10L in box of 2 uds.
New product elaborated especially
for the treatment and maintenance
of cleaning and polished
aluminum, copper and brass.
l Cleaning and polish of theAluminum, copper and brass.
l Cleaning companies, metallurgicrepair workshops.
l Airports, marine, shipyards, etc.
l Transport companies, service sta-tions, automobile parks, etc.
PROPERTIES
l Product highly concentrated.
l Product fast and efficiency, at the same time that cleansand polishes the surface.
l The treated metal is impregnated from a microscopelayer which protects during a period of time from news
attacks.
INSTRUCTIONS OF USE
l Being a high concentrated product, can be used withhigh dilution in water; although in cases of extreme dirt, is
recommended to use it without dilution.
l The ways of using it can be: by spraying, by immersionor by mopped.
l The dilution to use will depend on the grade of dirt ofthe surface to treat:
Very dirty: the product must be used pure or 1 part of pro-
duct in 1 part of water.
Less dirty: 1 part of product in 10 parts of water.
l Once the product is applied, rub in circle, leave it a fewminutes, and after that rinse with abundant water. If you
want to polish, it will be convenient to dry the surface.
ALUMINUM, COPPER AND
BRASS CLEANER-POLISHALUTEC
APPLICATIONS
Presentation
K1
Ref. T1047
l 1L in box of 20 uds.
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Product which attacks the rust in
metals providing later a
monomolecular oxide layer which
protects the metal temporally of
later rusting.
l Metal mechanized workshops.
l In construction, to phosphatize
sheets of cement and as descaling.
l In paint workshops to deoxidize
and degreasing metals before it is
finished.
PROPERTIES
l Acts in ferrous metals, aluminum, brass, lead, copper,etc.
l Descales and deoxidize metallic surfaces, leaving themin perfect conditions.
l Gives a protector pasivate from 24 to 48 hours, allowingthe realization of later operations (varnish, paint, etc).
l In storage of pieces, it is convenient to apply our productof metals PROMET after having rinsed and dried properly.
l Eliminates calcareous embedded.
INSTRUCTIONS OF USE
l It can be used pure but it is much better diluted, in 3parts of water.
l It can be used by immersion of the piece, or by spraying,or by mopped.
l It must be left a few minutes and after that rinse withabundant water and dry with a mop.
l It is convenient to avoid drippings and unequal applica-tions.
ANTI-RUST DEGREASING
PASSIVATORPASIDEX
APPLICATIONS
Presentation
K2
Ref. T1022
l 5L in box of 4 uds.
l 10L in box of 2 uds.
This product is especially
formulated for the treatment of
rusted iron surfaces. When it is
applied, is produced a chemical
reaction where the ferrous rust
changes to an organic insoluble
component with a black-bluish
color, which protects the metal
from later rusting, it is useful also
as a firm base for the painting or
other finishes.
PAVON covers a wide range of appli-
cations.
As transformer of rust applicable in
all those industries which contain or
work with metals, as for example:
the naval industry, automotive
industry, maintenance industry,
construction industry (for the treat-
ment of fences, windows, tools, etc)
do-it-yourself-project, etc.
PROPERTIES
l It is not necessary to sand in depth, although to get bet-ter results, it is necessary to eliminate the rests of paint,
embedded, residues, and greases, so that, the product can
react directly with the oxide.
l The treated surfaces, staying ready to receive a paint orpolish finished. It may be done without painting, applying a
second hand of product.
l Does not freeze.
l Does not contain inflammable or volatile solvents.
l High performance: 15-20 m2/l environmental tempera-ture.
INSTRUCTIONS OF USE
“SHAKE BEFORE ITS USE”
Apply with a brush, roller or spraying.
It is not recommended to dilute it.
Surfaces with rests of paints and old oxide: scour the surfa-
ce to facilitate the penetration of the product and apply one
hand.
Embedded surfaces with calamine: apply sand stream to
get a perfect application and apply a hand of product.
Surfaces with little oxide: clean the dust and apply a hand
of product.
l Approximate dry time: 2 hours. Do not apply paint, or a
second hand before the time indicated before.
l The cleaning of the equipment, it is done with water, justafter its use.
IRON OXIDE TREATMENT
(OXIDE TRANSFORMER)PAVON
APPLICATIONS
Presentation
K3
Ref. T1031
l 1L in box of 12 uds.
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Anticorrosive fluid, metal
protector against the oxidation
and the attack of the atmospheric
agents in long storages.
l Metal mechanized workshops, avoi-ding that the pieces stored start to rust.
l For the perfect maintenance ofmachinery and tools.
l Anticorrosive cladding of molds,mechanized equipments, naval machi-
nery, and in general in the protection of
all naked metals which want to be
maintained in optimal conditions in
long storages.
l To protect metal elements which arestorage for seasons.
PROPERTIES
l Product of high technology made by vinyl monomers inmineral oils refined of light type, which have been conve-
niently added with antirust elements which protect the
metallic surfaces during its manufacturing process, mani-
pulation and storage.
l Isolate the, metallic surface from dampness and theattack of the atmospheric agents, creating a monomole-
cular transparent layer which gives bright and enhance
the metals.
l It does not crack or divide up with the change of tempe-rature, providing a permanent light layer, which does not
dry with the passing of time, what makes ideal for the
covering of pieces recently deoxidized and degreased.
l Avoid the direct contact of the air´s oxygen with themetallic surface, avoiding its corrosion and having the
capacity of eliminating easily through a security solvent
before the final treatment.
l The protector covering has an average duration of 2-4months, after which it must be proceed to treat with the
protector again.
INSTRUCTIONS OF USE
The product must be used pure, as it is supplied. It can be
applied by brush, immersion or spraying.
Before its application, it is recommended to clean well the
corroded part using a stiff brush, or to treat with our deoxi-
dizing DESCAL.
After that, apply the protector trying to cover all the area.
The treatment will be repeated as many times as that oxide
or corrosive signals appear.
METAL PROTECTORPROMET
APPLICATIONS
Presentation
K4
Ref. T1012
l 5 L. in box of 4 uds.
l 10L. in box of 2 uds.
Moisture of inorganic acids,
surfactants, moistening and
corrosion inhibitor.
Polish and clean the stainless
steel, chroming and the aluminum
without necessity of scratch or
rub.
l Cleaning of aluminum and stainlesssteel in the food industry, as the follo-
wings:
Meat, canned food, bottling plant,
winery, etc.
l Transport companies, service sta-tions, automobile parks.
l Shipyards, marine, etc.
PROPERTIES
l Eliminates smoke pots, white oxides and other dirtiesquickly and efficiently.
l Also acts as surfactant on grease, dust, etc spots,making them to be diluted and being eliminated.
l High concentration.
INSTRUCTIONS OF USE
lHigh concentrated product, we recommend to use it verydiluted in 10-20 parts of water.
lOnce the dilution is done, in 10-20 parts of water, for onepart of product, it is applied on the surface preferably by
mop, avoiding the formation of gushes which can be mar-
ked later.
l After that a hard rinse with abundant water will be doneand at the end a small dry.
l This rinse with water is very important above all in thecase of the aluminum, as it helps to create a very thin layer
of oxide which passivates the surface preventing that the
posterior oxidation reaction continues, on the contrary that
would occur if the aluminum surface would be completely
naked.
STAINLESS STEEL AND
ALUMINIUM SMOOTHERPULICER
APPLICATIONS
Presentation
K5
Ref. T1013
l 5L in box of 4 uds.
l 10L in box of 2 uds.
It is made by a mixture of
humectants, sequestrants,
abrasives, brighteners and
viscosity regulators.
Eliminates spots caused by grease,
dirt, alkaline degreaser in surfaces of
stainless steel, allowing to recover the
aspect of the original polished.
l Very useful in metal workshops,companies of transformation of
stainless steel, industrial kitchens,
cleaning of extractors in industrial
kitchens, hotels, communities, clea-
ning companies, etc.
l Product with a high performancewhich allows the restoration of the
bright in very used surfaces, attac-
ked or very used.
PROPERTIES
l Contains surfactants which allow to penetrate and toextract the spot from the surface where it is applied.
l Contains fineness abrasive, hardness and granulometrysuitable to prevent marks on the treated surface.
l Its contain in sequestrant and brightener agents allowthe eliminations of oxide spots, stainless steel surfaces,
glass ceramic hob, etc.
l Allows the elimination of spots in surfaces that in anot-her way could not be eliminated.
l Restores the bright in metallic surfaces, stainless steel,etc, allowing to recover its original aspect.
INSTRUCTIONS OF USE
It is applied as originally in the container, extending a small
quantity of product on the spot to eliminate. Leaves it to
act during a few seconds and after that rub with a clean
mop until the spot is eliminated.
STAINLESS-STEEL
SURFACE POLISHREVIPUL
APPLICATIONS
Presentation
K6
Ref. T1051
l 1L in box of 20 uds.
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Natural product
indicated to absorb
or eliminate spots
or spilled of water,
greases, oils,
industrial solvents,
etc.
l In all types of mechanic workshops,industrial plants, chemical products
companies, food industry, transport of
dangerous merchandise, areas of mer-
chandise storage, service stations, etc.
l In the elimination of bad odors in bre-eding centers, henhouses, poultry
farms, kennels, etc.
l Industrial slaughterhouses, countryhouses, cottages, etc.
l In the interior of fridges, rubbish con-tainers, dung-heaps, etc, to eliminate
bad odors.
PROPERTIES
l Inert with absorbed liquids, except with acids or heavybases, with which produce a non-violent reaction which
neutralized the acid or the base, facilitating its use.
l Non-flammable, so that, it can be used to control thecombustible and non-flammable liquid spilled.
l Possess elevated mechanical resistance. It is resistant tothe disintegration in dry state and anti-slip when there is
saturation of liquid.
l Possess a high porosity, which implicates the existenceof a high volume of gaps where molecules will be absor-
bed.
l It is innocuous, such as for people, as for animals orplants.
l As consequence, a bigger security on the work is deri-ved.
INSTRUCTIONS OF USE
l Spread a small quantity of product on the spot, forminga layer of few millimeters of thic
As illustrative data of the efficiency of our absorbent, we
show the following table.
Once the spot is dried, eliminate it with a sweep.
INDUSTRIAL ABSORBENT FOR ALL
TyPES OF SPILLS AND LIQUID LEEkSQUIMAN
APPLICATIONS
Presentation
L1
Ref. T1042
PRODUCT ABSORPTION CAPACITY
WATER 121,1
METANOL 49,4
PARAFIN OIL 54,9
METIL ISOBUTIL CETONA 51,7
WHITE SPIRIT 55,0
OIL SAE-10 57,0
OIL SAE-90 45,4
CUTTING OIL 87,3
GASOLINE 96 O 47,6
GAS-OIL 55,2
NaOH 50% (SOSA) 184,2
HNO3 60% (AC. NITRICO) 140,7
HCl 37% (AC. CLORHÍDRICO) 148,7
l 10L in box of 2 uds.
It is recommended its use always that it
is needed.
l Eliminate the dampness in a pro-perty.
l Prevent the no-creation of dust.
l In snow times, it eliminates the snowor ice.
PROPERTIES
l Soluble product in water with hot emission, its dissolvingform anti-freeze brine which can keep liquids to tempera-
tures of -50ºC.
l Very hygroscopic product, absorbs the atmosphericdampness, even with dry temperatures.
l It can be used as preventive character.
l Deliquescent product, it is dissolved in the absorbeddampness, maintaining humid around it and avoiding the
dust unpin.
INSTRUCTIONS OF USE
It will be used on a different way depending on the applica-
tion to do:
l ABSORBENT OF ENVIRONMENTAL DAMPNESS:Spread it in all the area, fine mesh containing between 0,5
and 1 kg of product, preferably situated in high for the envi-
ronmental absorption. The quantity of mesh needed will
depend on the size of the place and the relative dampness.
Put a cube or recipient below of each mesh to pick the
extracted dampness.
l ANTIDUST: spread the product in all the sand or chalkysurface. The squamas absorb the environment dampness
also in dry weather, keeping the sand humid and avoiding
the formation of dust.
Dosage: spread approximately between 2 and 5 kg of pro-
duct for 100 m2 of surface to treat.
l ELIMINATOR OF ICE AND SNOW: apply the productregularly in all the surface to treat. Wait until the squamas
are melted liquefying the snow or ice.
Approximately dosage: 2-8 Kg. of product for 100 m2 of
surface to treat, depending on the quantity of ice or snow.
Prevented treatment: use a dosage of 2 kg of product for
100 m2 of surface to treat.
ENVIRONMENTAL MOISTURE
ABSORBENTESCAMIT
APPLICATIONS
Presentation
L2
Ref. T1044
Solid squamas whose essential property is to melt
the snow and ice or to prevent their formation.
Absorbs the atmospheric dampness maintaining
the atmosphere dries.
l 5 Kg. in box of 4 uds.
l Descontamination of natural watersfrom polluted aquiferous by industrial oils.
l Facilitates the collection and elimina-tion of vegetable oils and minerals, diesel
oil, fuel-oil, hydrocarbon, biodiesel and
derivates in superficial waters, turbulent
water, deposits of containment of spills,
etc.
l Treatment of spills in rivers, lakes, aqui-ferous, sewerage systems, etc.
l Very useful in tow halls, public orga-nisms, sewages, companies of treatment
of industrial waters, recycled companies
and in general in multiples industrial
depuration processes.
PROPERTIES
l Lightweight product floating on the water by removingthe contaminants by capillary absorption. In contradistinc-
tion to other organic absorbents (type turf, sawdust, etc) or
synthetic absorbents (type polypropylene phenol formal-
dehyde or polyurethane) present higher efficacy by higher
specific surface, allowing the extraction of oils, hydrocar-
bon, fuel, etc, by buoyancy.
l Hydrophobic product very selective: Absorbs oils, hydro-carbon, fuel and derivates without absorbing water.
l Elevated capacity of absorption for having a high speci-fic surface, with a big pore diameter.
l Its internal red is distributed increasing its specific surfa-ce favoring the extraction of contaminant because of the
capillarity (acts as a sponge, extracting towards the surfa-
ce the industrial contaminating).
l It does not produce secondary pollution in its applica-tions, allowing the extraction of the contaminating from
the treated water without necessity of later treatments.
INSTRUCTIONS OF USE
It is used applying the product directly on the spilled to
pick up, spreading the product to increase the absorbent
capacity. In big spilled, it can be applied from dinghy,
boats, hydroplanes, etc. The absorption is produced imme-
diately getting the difficult areas.
HyDROCARBON ABSORBENTAQUALIMP
APPLICATIONS
Presentation
L3
Ref. T1061
Natural product of volcanic origin, based on their
performance absorbent capacity of the expanded
vermiculite back with repellent treatment, very
light material, with high buoyancy and chemical
affinity for oils and hydrocarbon.
l SACKS OF 100 L (17,5KG)
.
Preventive treatment of odours
and fats for areas at risk of build-
up of sludge,organic waste, etc. A
complex mixture of halogenated
benzene derivatives in
orthoposition, surfactants, etc.
Our odour and fat remover is ideal
for use in:
l Wastewater-treatment facilities,sewers, entrance mouths, storm
drains, etc.
l Areas of continuously high levels ofdeposited fats and oil, such as: abat-
toir floors, meat-processing plants, etc.
l Landfills and rubbish tips, skips,containers and rubbish-collection
trucks.
PROPERTIES
Removes unpleasant odours emanating from plugholes
of washbasins, bidets, showers, bathtubs, etc. and pre-
vents odours from recurring.
l Eliminates build-up of fats and sludge in pipes andmachinery at wastewater-treatment plants, without
affecting activated sludge.
l Reduces clogging and helps maintain the free circula-tion of liquids through the system.
l Does away with problems caused by insects, by kee-ping them away.
l Contains no alkaline or corrosive substances thatcould damage the installation in any way.
INSTRUCTIONS OF USE
Highly concentrated product. Do not use without diluting
first. Dilute in water with 1 part product per 10-100 parts
water.
l Cleaning:
- Rubbish trucks and collection bins:
Dilute 1 litre of product per 1000 litres of water.
- Rubbish areas and bins: Dilute 1 litre per 100 litres
of water.
l Septic tanks:
The dosage will depend on how dirty the wastewater is.
To serve as a guide:
For a 3,000-litre tank:
Very dirty water: Dilute 10 litres of product in 100 litres of
water and pour uniformly into the tank.
Dirty water: Dilute 1 litre of product in 100 litres of water
and pour uniformly into the tank.
ODOUR AND FAT REMOVERODODOUR AND
FAT REMOVEROUR AND FAT REMOVERGRASOLOR
APPLICATIONS
Presentation
M1
Ref. H1008
l 1 Kg. in box of 12 uds.
l 5 Kg. in box of 4 uds.
l 10 Kg. in box of 2 uds.
Specific product for cleaning, fat
removal and elimination of
unpleasant odours in areas near
rubbish containers and tips, pipes,
fat traps, processing floors and
areas, compost heaps,
wastewater, or for use in the food
industry.
l It can remove bad odors in wastewa-ter, sewers, manholes, grease traps,
drains, etc..
l Particularly useful for waste-collec-tion firms to eliminate unpleasant
odours at bin stores or for cleaning and
deodorising used containers.
l Eliminates unpleasant smells atfarmyards, animal transit areas, sta-
bles, pens, etc.
l Very useful in the elimination of badodours in catering, storage companies
or collection of urban residues, Food
industry,etc.
PROPERTIES
Cleaning and fat removal of floors and surfaces at industrial
abattoirs, animal-sacrifice areas, waste stores, and in gene-
ral anywhere related to the food industry where unpleasant
odours need to be eliminated.
l Based on natural terpenic derivatives mixed with selectedemulsifiers.
l Provides water-stable emulsions that highly effective atremoving fats and eliminating odours.
l Facilitates the removal of fats and dirt simply by rinsingwith a water jet.
l Contains no halogenated aromatic solvents.
l Eliminates bad odours near rubbish tips, wastewater, etc.,and replacing them with a long-lasting pleasant smell.
INSTRUCTIONS OF USE
Use diluted in water as an emulsion. The exact proportion
will depend on the amount of dirt and intensity of the
odours to be eliminated. Can be applied by drip dosage,
sparring or by adding the emulsion directly to the area to
be treated.
As a standard dose, use 1 part product per 10-25 parts
water. In areas where fat is to be eliminated, dilute to 1% in
water.
Leave for a few minutes and then rub with a cloth or stiff
brush, or rinse with a water jet.
ECO-SOLVENT ODOUR REMOVERODOREV
APPLICATIONS
Presentation
M2
Ref. H10108
l 5 L. in box of 4 uds.
l 10 L. in box of 2 uds.
Composed of a complex of
phosphates in dissolving, with
powerful inhibitors of corrosion
and antimicrobial, special for
water treatments.
We recommend its use in all types of
refrigerant circuits or boiler facilities to
prevent the salt embedded which can
provoke big problems. The factors which
affect more in the behavior of the water
are: pH, contains in oxygen, hardness
and mineralization. Our preventive acts
on all these factors, maintaining in the
most appropriate levels for the perfect
operation of the facilities.
PROPERTIES
l Catch the calcium ion, magnesium, etc, maintainingthem in the solution and avoiding their incrustation in
walls.
l If exists a previous incrustation, it acts on it, establishinga tendency on the metallic ions of the salt scab to pass
throw the solution, reducing like this the incrustation.
l Acts on the pH, maintaining it in an alkaline intervalwhich inhibites the cathode reaction of reduction of the
oxygen.
l The action of the corrosion inhibitors impeding the wearof the facilities and its bad operation.
l The antimicrobial action reduces the risk of formation ofsubstance of biological origin and inhibites the formation
of mud.
INSTRUCTIONS OF USE
Before starting with the treatment, we recommend to
clean the interior with our descaling and powerful cleaner
DESCAL A.E, to ensure a well operation of the facilities.
First treatment: we recommend a dosage of 4 liters of
SINCAL for 1000 liters of water, such in refrigeration as
in boilers.
Maintenance treatment: take a sample once the preven-
tive is diluted, and compare it once a week with the water
of the circuit, if the color has changed to a lighter one,
means that the concentration of SINCAL is low and for
this reason, it will be added more product until getting
the color of the sample.
BOILER AND COOLING TOWER
ANTI-SCALE PROTECTIONSINCAL
APPLICATIONS
Presentation
N1
Ref. T1019
l 5L in box of 4 uds.
l 10L in box of 2 uds.
l Metallic workshops and sheet metalworkshops.
l New construction: windows, railing,stairs, etc.
l Shipyards, sport ports, etc.
PROPERTIES
l Protects metallic materials in public works as: metallicrailings, aluminum windows, etc.
l Protects decorative objects of cooper, silver and nickelsilver, aluminum, etc, during the transportation, packaging
or storage.
l During the winter, it protects the storage of boats andother elements.
l Protects in the maritime transports of tanks, beams, etc,the metallic pieces of the corrosive salt environment of the
sea.
l Protects the corrosion pieces before being painted.
l It comes easily off from the pieces without leaving resi-dues to be treated, from paint or galvanized.
l It does not contain inflammable solvents or dangeroussubstances.
l Protects also non-metallic surfaces, as: glass, vynil floortiles, etc.
INSTRUCTIONS OF USE
l It is applied by brush or roller as it is original in the con-tainer, or diluted with a 25% of water, if it is not required a
high quality on the covering.
l It can be used also by immersion or spraying dependingon the surface to treat.
l Once the surface is treated, wait until it dries completelybefore moving the piece.
l To recover the treated piece, it is enough with throwingfrom the superficial reel which will be come off easily wit-
hout leaving residues.
l The product will be eliminated easily from the worktools, cleaning them before they dry.
STRIPPING LACQUERSTAPEL
APPLICATIONS
Presentation
N2
Ref. T1024
Product specially designed in base to a vinyl
acetate homopolymer to get the isolation of some
materials temporary or definitely, of an
aggressive environment.
l 1 Kg. in box of 16 uds.
l 5 Kg. in box of 4 uds.
l 10 Kg. in box of 2 uds.
Product composed by a mixture of
solvents and additives, with
lubricant properties, deoxidizing
and inhibitors of corrosion that,
with the high capacity of
penetration, make of it a big help
to any problem of block, clog or
plugging.
l Unblocking of screws and mechanicparts which are oxidized.
l It helps to remove oxidized shafts, toliberate rings from corrosion machines,
etc.
l In gunsmith, naval industry, in shipsand yacht, boats and watercrafts.
l In general, in workshops of repara-tion of vehicles, service companies,
shipyards, big collectivities, railways,
etc.
PROPERTIES
l Dissolves effectively the dirt, mold and all types of resi-dues.
l Acts by capillarity, what provides an excellent power ofpenetration getting the most hidden particles of oxidize.
l Very quickly action, loosen in a few seconds all types ofnuts, bolts, locks, etc.
l Its contents in antioxidant, and inhibitors of corrosion,help to keep clean and lubricate the piece, delaying later
obstructions and blocks.
l It can be applied on surfaces of rubber, eraser, wood ormetal, without damaging the finished result. Surfaces of
plastic require a check “in situ” due to the big variety of
them existing on the market.
INSTRUCTIONS OF USE
It is used as it is supplied, in pure state, without solution.
The application will be done by brush, spraying or by
immersion, leaving to pass 20-30 minutes before procee-
ding to loosen the piece.
INSTANT BLOCkAGE REMOVERABRITON
APPLICATIONS
Presentation
N3
Ref. T1017
l Aerosol in box of 12 uds.
l 5 L. in box of 4 uds.
Product formulated with
surfactants few sparkling and
agents of alkaline reaction, that
with the rest of components,
practice an action of perfect
cleaning and polishing on bottles
and glass containers in bottling
plants.
We recommend its use in the wash
and polish of glass container in all
types of industry where they are
recycled, as in: beer and milk
industry, mineral water packer, wine,
soft drinks, etc.
PROPERTIES
l Possesses a high keeping power of calcareous andmagnesium salts, which are solved easily.
l It does not leave salt spot in the glass, which are the ori-ginator of the matting in the brightness of the bottle.
l Possesses a high emulsifiable power of the dust, greaseand any type of dirt, allowing it dragging with a later quick
wash of the bottle.
l Moves away the rest of labels and adhesives, leavingthe bottle completely clean and shining.
INSTRUCTIONS OF USE
It can be used by immersion or by spraying on the contai-
ners to treat, making later a strong quick wash of them to
drag the rests of the product.
The concentration or dosage of use, will depend on the
function of the current dirt in the containers.
We recommend dilutions from a 3% on the total water of
the machine.
BOTTLE SHEENTELLAS
APPLICATIONS
Presentation
N4
Ref. H1044
l 5L in box of 4 uds.
l 10L in box of 2 uds.
We recommend its use each time that
any tools related to the milk industry
have been used: evaporators, pre-hea-
ters, recipients, etc.
l Dairies, facilities of milking.
lMilk industry (milk, cheeses, yogurts)
PROPERTIES
l Prevents damage in food and bacterial contamination.
l Eliminates the grease deposited in all type of machineryand recipient.
l It helps to the elimination of the “Milk Stone”.
l If it is used in the appropriate proportions, it does notproduce corrosion.
l Easy usage, practical and economical due to its dilution.
INSTRUCTIONS OF USE
Use it diluted in water with the following proportion: 1 of
product for 10 of water.
Regularly, at least once a week we recommend a comple-
mentary treatment with a product of the “Milk Stone”, for
this, we recommend our IODOFIL or DESCAL A.E.
The complete treatment must follow the following steps.
1.Quick wash of the equipment with water until it is not
milky.
2.Stir the acid product (descaling) during 30 minutes in the
appropriate dilution.
3.. Quick wash carefully with hot water if it is possible, until
the pH of the water become neuter.
4.Stir our diluted REVILAC in the proportion 1:10 during the
same time.
5.Quick wash again with water. If the treatment is only with
REVILAC, the three last steps will be only followed.
DAIRy INDUSTRy
DEGREASING DETERGENTREVILAC
APPLICATIONS
Presentation
N5
Ref. H1058
Its composition is a complex mixture
and completely equilibrated of
products of alkaline origin,
sequestering and other additives that
dissolve and emulsify the grease of
milk providing a total cleaning of
vessels, pasteurizers, pre-heaters,
circuits and storage recipients.
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Product especially formulated for
the elimination of the foam
produced in general processes in
a wide range of pH.
It can be used in the defoaming
required for all types of descaling
and chemical cleanings in
general, also in all types of
industrial activity.
l Technical services of maintenance of
hotels and communities.
l Plumbing, gym centers, town halls,
etc.
l Industry in general (rubber, paper,
paint, etc)
PROPERTIES
l Product formulated in base of polymerized siloxanemodified of big activity antifoaming.
l Stable at pH 1-2, so that it can be used in processes ofdescaling of all types of machines.
l Product high concentrated, it is used in dilutions appro-ximately of the 1%, and in lower concentration in some
processes.
l Its composition, makes it ideal to use it as anti-foamingin the paint rubber, glue industry, etc.
INSTRUCTIONS OF USE
“STIR BEFORE USE IT”
l Manufacturing of paints, glue, etc: dilute in water of
manufacturing in a range of concentration approximate of
1-5%.
It is convenient to do previous trials to identify the ideal
concentration in each process.
l Descaling and chemical cleaning: add to the descaling 1-
5% respect to the total of the current water.
GENERAL PURPOSE ANTI-FOAMERPUMEX
APPLICATIONS
Presentation
N6
Ref. H1056
l 5L in box of 4 uds.
l 10L in box of 2 uds.
A mixture of specific additives for
use in contact with all sorts of
silicones.
For use in installation shops and at cons-
truction sites on marble or granite surfa-
ces, tiles, enamelled surfaces, sealing
and calking joints.
l Very useful in construction compa-nies, building maintenance contractors,
tiling subcontractors, bathrooms, etc.
l High-performance product providinga high-quality finish whilst keeping
tools clean and reducinglabour.
PROPERTIES
l Contains additives that improve spreading silicon injoints, providing a smooth, perfect finish.
l Keeps silicone from sticking to skin and tools, andmakes cleaning easier.
lMakes it possible to smooth out joint surfaces.
l Does not affect curing or elasticity of the silicone joints itis applied to.
INSTRUCTIONS OF USE
It can be used on recently applied silicone beads and joints
as it comes from the container, moistening your finger in
the product and passing it over the silicon bead.
It may also be applied by spraying the surface where silico-
ne has been applied and then smoothing it out
with a palette.
SILICONE APPLICATION
SMOOTHERREVIGAL
APPLICATIONS
Presentation
N7
Ref. C1086
l 1L in box of 20 uds.
l 5L in box of 4 uds.
l 10L in box of 2 uds.
Anti-silicone in operation of
soldering. Avoid the adherences
of rest of electrodes in
mouthpiece and in metallic
surfaces close to the soldering
cord. It does not contain silicone.
Specially indicated in workshops
where soldering works are done,
metal workshops, boiler of stainless
steel, public works, navies, railways,
etc.
Improves the conservation of the
equipments of soldering allowing to
increase the performance and qua-
lity of the terminations.
PROPERTIES
l Protects the MIG blowlamp (metal inert gas) that use aselectrode a thread of consumer metal, soldering mouth-
piece and surfaces close to the soldering cord, avoiding
the splatter of molten metal.
l Improves the termination of the soldering providingfinishes of high quality.
l It does not contain silicone and fluids that interfere inthe later processes to the soldering, so that it allows the
paint and the serigraph of the treated surfaces.
l Improves the slipping of the gas by the mouthpiece,allowing to do works with less pressure than normally.
l Product packed in aerosol with propellent non-contami-nating of the ozone layer.
INSTRUCTIONS OF USE
“STIR BEFORE USE”
Spraying directly on the surface to treat 20m far, in short
gusts. Once the application is finished, invert the aerosol
and do some spraying to clean the valve.
NON-SILICONE WELD
ANTI-ADHERENTREVISOLDER
APPLICATIONS
Presentation
N8
Ref. T1055
l Aerosol 400 cc in box of 12 uds.
Solid product easily soluble in water of high
molecular weight, specific for the clarification of
industrial waters, separation of solids in mining,
treatment of water of cabins of paints and
industrial processes.
It is used in the treatment of separation
of minerals in waters of industry of
extraction of metals, high value added
and metallurgic miner.
l Facilitates the maintenance of pipesand graves of decantation of solids in
cabins of paints.
l Very useful in all types of treatmentsof clarification of industrial waters, pro-
cesses, etc, where a high content of
solids exist in their pension.
INSTRUCTIONS OF USE
It is used, diluting the product in water and rationing the
content in solids of the water to treat. As illustrative dosa-
ge, use dilutions from 0,1 to 0,5%. The dosage will be done:
mixing the dilution of the product with the water to treat,
with a sufficient contact time for the process of foculation-
decantation will take place.
To get an optimal result, it is recommended to do a decan-
tation trial with the water to treat to affix the appropriate
dosage and the decantation of solids time.
In cabins of paints, apply dilutions of product to the 0,2-
0,3% per cubic meter of water weekly. These quantities can
vary depending on the absorption of paint by the system. It
is recommended to do a cleaning of the pipes, circulation
circuits, bombs, and storage tank of water each 4-6
months, to avoid excessive accumulation of residues in
the circuit of dust capitation.
FLOCCULANT FOR MINING AND
INDUSTRIAL PROCESSESREVIFLOC
APPLICATIONS
Presentation
N9
PROPERTIES
l Facilitates the solid separation works, precipitation ofdust in suspension, minerals in industrial waters.
l Acts grouping particles, creating bulky floc which formsprecipitate that decanted easily.
l Eliminates the turbidity and allows the reuse of the capi-tation water of dust in cabins of paint, providing spongy
floc easily pumpable which avoids obstructions in ponds
of decantation.
l Allows the selective separation of metals of high valueadded in processes of extraction of minerals.
l Acts quickly, allowing to improve the performance inthe clarification of waters in industrial processes.
Ref. T1057
l 5 Kg. in box of 4 uds.
l 10 Kg. in box of 2 uds.
Paint in aerosol in base to metallic
zinc with appropriate additives for
the protection of metallic surfaces
against the corrosion by
atmospheric agents. Provides a
similar finish to the cold
galvanization.
Paint in aerosol that provides termina-
tions similar to the cold galvanization, for
this, its use is very useful in all types of
workshops; forge, metal, reparations of
metallic structures, anticorrosive protec-
tion, etc.
l Easy to apply. Its use allows thereduction of time in works of mainte-
nance, reducing costs of work.
l Applicable in industrial and institu-tional maintenance, construction com-
panies, reparation of industrial machi-
nes, etc.
PROPERTIES
l Allows the protection of metallic surfaces against theoxidation and corrosion.
l It can be used as priming in the protection of metals oras termination paint of the metallic surface treated.
l In soldering allows the equalization of the termination ofthe material where it is applied.
l Quick dry, what allows the use of surfaces treatedquickly.
l Allows the protection of metallic surfaces against theaction of salt fog, allowing the resistance of cycles supe-
rior to the 700 hours of work, with thickness of 45 micron.
l Allows to support temperatures of work until 200ºC.
l Product packed in aerosol with propellent non-contami-nant to the ozone layer.
INSTRUCTIONS OF USE
Before applying the product, clean the grease and oxide of
the surface to treat with a sand paper. Stir well before use
it. Spraying directly on the surface to treat with a distance
of 20-25 cm, in short gusts.
Once the application is done, invert the aerosol and activa-
te the push button to clean the valve.
Dry time is between 15-30 minutes, with a performance
approximately of 0,6-0,8 m2/aerosol.
To improve the terminations, apply thin layers superimpo-
se in case of corpulent layers.
For the cleaning of tools use xylene as solvent.
COLD GALVANISATIONGALVIREV
APPLICATIONS
Presentation
N10
Ref. T1058
l Aerosol 400 cc in box of 12 uds.