CATALOGO CEFIL NUEVO

Synthetic Roofing & WaterproofingTechnology

Edicar Plásticos

Advanced Waterproofing Technology

4 Quality assured

4 Environmentally friendly

4 Fire resistant

4 Proven track record

4 Long life expectancy

4 Highly flexible

4 Selection of colours & finishes

4 Low energy output

4 Resistant to UV’s, pollutants, chemicals & roots

4 Superior puncture & tear resistance

Page

INTRODUCTION 3

REASONS TO SELECT CEFIL SYNTHETIC MEMBRANES 4

CEFIL ROOFING 6 Cefil RP 8 Cefil RV 11 Cefil SR 16 Cefil Accessories 21 Cefil Eco-Roof 23 Project Portfolio 27 Roof Assured Warranty 29

CEFIL RESERVOIRS 32 Cefil RESERVOIRS 34 Cefil RP 35 Cefil SR 37 Cefil DW 39

CEFIL TUNNELS 40 Cefil all the possibilities 42 Cefil T SIGNAL 43 Cefil T TRANSPARENT 45 List of References 47

EDICAR PLASTICOS MANUFACTURING PROCESS 48

Edicar Plásticos S.L.Pol. Ind. Jundiz C/Jundiz s/nº01015 Vitoria-Gasteiz

Edicar Plásticos S.L. - manufacturers and distributors of quality roofing and waterproofing systems. For

further information please contact our marketing and technical services.

C o n t e n t s

Phone: +34 945 290060 Fax: +34 945 290348 www.edicarplasticos.com Email: [email protected]

For more than 30 years, PVC membranes have opened their way to all waterproofing sectors, thanks to their many advantages, such as flexibility and strong tearing resistance, combined with superior welding ability, low safety risks, ease of Installation and excellent whole life costs.

The Cefil range of waterproofing products have a long and successful history, produced under strict ISO9001 quality control standards. Cefil synthetic waterproofing membranes have been specifically developed to achieve a fast, sustainable, durable environmentally friendly and aesthetically pleasing waterproofing solution. Over 7.000.000 sqm of Cefil membranes are produced and distributed yearly by Ceplastik.

Carefully selected polyester and glass reinforcements are coated on each side by a superior blended PVC flexible plasticiser. These reinforcements considerably improve stability, strength, puncture resistance and long term durability. The result is a homogeneous high quality flexible membrane.

Cefil waterproofing membranes are available in a range of formats to suit almost any type of waterproofing concept for a building or structure. These formats can be broken down in to 4 main categories:

o RP Mechanically fixed self protected systems

o RV Fully adhered self protected systems

o ECO-ROOF - Green roof systems

o Inverted roof systems with additional protection.

These categories are all available in a range of colours with associated accessories to complete any architectural concept and to offer a complete warranted system for the most discerning of clients.

This brochure has been prepared to assist specifiers and Contractors in selecting the most appropriate products from the range available.

I n t r o d u c t i o n

‘Over 7.000.000 sqm of Cefil membranes are

produced and distributed yearly’.

+34 945 290060 3

1. UV RESISTANCE - Cefil membranes are integrated with UV resistors at source during the manufacturing process. Exposed membranes therefore provide superior UV degradation resistance.

2. FIRE RESISTANCE - Cefil membranes are Fire resistant and self-extinguishing. In addition, they cannot be ignited by flying sparks. Cefil membranes have passed some of the most stringent European regulations including BS476: part 3. The use of Cefil

membranes is therefore unrestricted under the current building regulations.

3. WATERTIGHT - Cefil membranes, when correctly heat welded, homogenise together to become one at molecular level. Therefore the join is at least as strong as the membrane itself with no weak points. The membrane has been rigorously tested for moisture resistance, behaviour under hydrostatic pressure and impact strength, and classed as leakproof. Under the European standard peel test, the Cefil membrane broke outside of the seam without any sign of weld failure.

4. FLEXIBILITY - Cefil membranes have all been produced to comply with the needs of today’s buildings with regard to structural and building movement. They are dimensionally stable and will repeatedly accommodate normal structural movement without fatigue. Low temperature flexibility has been tested down to -35 degrees C.

5. SUSTAINABILITY - Cefil membranes have been rigorously tested by many European testing establishments and have a proven successful history of providing long term waterproofing to a variety of building designs. The product life expectancy is documented as ‘in excess of 20 years’ and laboratory accelerated weathering tests have shown this to be even greater. Cefil materials are installed Worldwide in a variety of climatic extremes and show superior performance and durability - a crucial element of environmental sustainability.

6. GUARANTEE - Extensive roof assured warranty schemes are available that a client can trust for up to 10 years. Under correct installation conditions Cefil membranes have 10 years guarantee against any production fault.

7. QUALITY - Cefil membranes are produced strictly in accordance with ISO9001 quality standards. The calandering & lamination process is computerised to ensure consistent quality and all raw materials randomly tested prior to integration and development.

www.edicarplasticos.com

R e a s o n s t o s e l e c t C e f i l s y n t h e t i c m e m b r a n e s

4

BS

476 Part 3

FIR

E R E S I S TAN

TPassedINTRON

8. ENVIRONMENTALLY FRIENDLY - Cefil synthetic membranes are produced in line with the ISO14001 environmental management system. This policy covers development, Raw materials, Production, Distribution, Installation, Service and recycling.

The product provides a healthy long life expectancy and can be recycled at the end of its useful roofing life. Assembly and seam welding is rapid with a low energy output and the membranes lightweight construction minimises transport energy. Cefil

products therefore represent a minimum burden on the environment, from conception to completion.

9. SAFETY - Cefil membranes are fast and easy to install and offer significant reductions in relation to risk with many alternative roofing systems. To compliment the membrane, all specifications are Safety conscious with the integration of polyurethane glues (CFC & HCFC free) and even self-adhesive Vapour barriers to avoid the use of hot bitumen boilers. This provides peace of mind to building owners and Installers and achieved preferred system status with some leading building Insurance underwriters.

10. AESTHETICS - Cefil roofing membranes come in standard light grey and lead grey. However, alternative colours are available on order request, blue, green, beige and red. All colours are tested for Colourfastness under UV and Sunlight accelerated procedures to ensure long term aesthetic performance.

11. TECHNICAL SUPPORT - Ceplastik can offer everything a specifier or building owner will need. Our team are available throughout the project to ensure complete client satisfaction.

+34 945 290060 5

ROOFING

Cefil RP Mechanically fixed roofing systemSuitable for:o Metal profiled deckingo Timber decking (Minimum 18mm plywood)o Concrete deck (Subject to pull out resistance test)o Roof refurbishment

Formats available:o Warm roof (Flat or tapered Insulation)o Cold roofo Inverted roofo ‘Living’ or Bio-diverse roof

Finishes available:o Self protected smooth finish (Light or Lead grey as standard)o Standing seam or lead effect raised profile finisho Paving or ballast finish (Inverted roof )o Intensive, extensive or Bio-diverse roof

Specific Benefits:o Lightweighto Fast installation processo Excellent wind uplift resistance capabilitieso Excellent whole life cost and economy of scaleo Low maintenance

Cefil RP is cross reinforced with a woven high tensile polyester carrier and has been specifically developed to absorb repeated stress and deformation, a vital characteristic for long term durability of mechanically fixed systems. The product is engineered to withstand severe wind loads and the most extreme weather conditions.

Cefil RP is normally installed as a complete system, including vapour barrier, Insulation and ancillary products to meet current building regulations and client specifics.

The installation method comprises of the laying out of 1 or 2m wide Cefil RP, with specialised fixings located near the side lap and

overlapped by adjacent sheets. The laps are subsequently heat welded using semi automatic hot air welding equipment to form a homogeneous joint at the seam.

On this type of systems, the fixings utilised are high quality corrosion resistant incorporating a unique telescopic tube fastener. This tube provides a higher wind uplift performance and practically eliminates cold bridging.

Further advantages of the tube washer system are that no damage occurs to the interface between threaded fastener and deck if a load is applied on the washer; neither can the head fastener protrude through the waterproofing layer.

www.edicarplasticos.com8

ROOFING

*Note: Colour range listed is normally on stock, alternative colours and thicnesses including White, Blue, Red, Beige and Green are available subject to extended lead time and quantity required.

“N” AENOR PRODUCT COLOUR THICKNESS WIDTH OUTDOORS REINFORCEMENT CERTIFICATE/ (mm) (M) CE MARKING

Cefil RP Grey / Dark grey 1,2 1 Yes Polyester net Yes

Cefil RP Grey / Dark grey 1,2 1,5 Yes Polyester net Yes



Cefil RP Grey / Dark grey 1,5 1,5 Yes Polyester net Yes


Cefil RP 120 GREY/DARK GREY

Description:Flexible sheet of PVC flexible, 1.2 mm of thickness with polyester reinforcement included. As required, microorganisms resistant.

Application:Roof waterproofing. Useful for outdoor applications. It has got CE marking certificate corresponding to UNE EN 13956 normative, (nº 0099/cpd/a85/0033), and also N mark of quality product given by AENOR (nº 001/004659).

Cefil RP Mechanically fixed roofing system

+34 945 290060 9

TEST METHOD USUAL VALUES UNE EN 13956

Thickness (mm) UNE 53.213-2 1.2 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.4 ≥ 0.3 Width (mm) UNE EN ISO 426 Max. 2000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (N/50 mm) EN 12311-2 L, T = 1000 MLV Elongation (%) EN 12311-2 L, T = 15 MLV Tear resistance (N) EN 12310-2 L, T = 250 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L, T = 100 MLV Dimensional stability (%) EN 1107-2 0.2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV Exposure to uv radiation (foldability at low EN 1297 Pass Pass temperature after 1.000 H) External fire performance EN 13501-5 BROOF (t1) BROOF (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass Pass Resistance to root penetration EN 13984 Not penetration Not penetration Resistance to static loading (20 Kg) EN 12730 No cracks MLV Determination of hail resistance (m/s) EN 13583 Support hard: > 21 -- Support soft: > 43

ROOFING


Cefil RP 150 GREY/DARK GREY

Description:Flexible sheet of PVC flexible, 1.5 mm of thickness with polyester reinforcement included. As required, microorganisms resistant.

Application:Roof waterproofing. Useful for outdoor applications. It has got CE marking certificate corresponding to UNE EN 13956 normative, (nº 0099/CPD/A85/0033), and also N mark of quality product given by AENOR (nº 001/004659).


Thickness (mm) UNE 53.213-2 1.5 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.6 ≥ 0.3 Width (mm) UNE EN ISO 426 Max. 2000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (N/50 mm) EN 12311-2 L, T = 1050 MLV Elongation (%) EN 12311-2 L, T = 16 MLV Tear resistance (N) EN 12310-2 L, T = 250 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L, T = 100 MLV Dimensional stability (%) EN 1107-2 0.2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV Exposure to uv radiation (foldability at low EN 1297 Pass Pass temperature after 1.000 H) External fire performance EN 13501-5 BROOF (t1) BROOF (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass Pass Resistance to root penetration EN 13984 Not penetration Not penetration Resistance to static loading (20 Kg) EN 12730 No cracks MLV Determination of hail resistance (m/s) EN 13583 Support hard: ≥ 21 -- Support soft: ≥ 43

ROOFING

Cefil RV Fully adhered roofing systemSuitable for:o Metal profiled deckingo Timber decking (Minimum 18mm plywood)o Concrete deck o Roof refurbishment

Formats available:o Warm roof (Flat or tapered Insulation)o Cold roofo Inverted roof

Finishes available:o Self protected smooth finish (Light or Lead grey as standard)o Standing seam or lead effect raised profile finisho Paving or ballast finish (Inverted roof )

Specific Benefits:o Lightweighto Fast installation processo No protruding fastenerso Excellent wind uplift resistance capabilities (fully bonded)o Excellent whole life cost and economy of scaleo Low maintenance

To enable superior performance of fully adhered single ply waterproofing, the carrier is required to provide different movement characteristics. A glass fibre mat is used, which is coated on both sides with plastisol. Cefil RV1 and RV2 are highly resistant to low and high temperatures and can easily accommodate cyclic structural movement whilst maintaining durability and flexibility in a bonded format.

Cefil RV1 and RV2 membranes are particularly suitable for roofs where mechanical fixing is not desirable, such as a Profiled metal decking with a powder coated underside as the finished product or certain types of concrete deck. It is also semi permeable to water vapour, and therefore provides an ideal solution to roof areas where interstitial condensation is

considered a higher risk than usual (e.g. over swimming pools).

Cefil RV1 and RV2 are normally installed as a complete system, including vapour barrier, Insulation and ancillary products. The installation method comprises of the laying out of 1 or 2m wide rolls with side and end overlaps of subsequent membrane, applied with an even coat of Cefil Membrane Adhesive to the membrane and to the surface that it is being applied to, i.e. deck or insulation. The laps are subsequently heat welded using semi automatic hot air welding equipment to form a homogeneous joint at the seam. In inverted or ballasted roof format, Cefil RV can be loose laid and laps subsequently welded.

+34 945 290060 11


ROOFING


Cefil RV1 (MV) Grey / Dark grey 1,2 1 Yes Glass fibre Yes




Cefil RV2 (RV) Black / Black 1,2 1 No Glass fibre Yes




Cefil RV1 120 GREY/DARK GREY


Description:Flexible sheet of PVC flexible, 1.2 mm of thickness, with glass non-woven reinforcement included. As required, microorganisms resistant.



Thickness (mm) UNE 53.213-2 1.2 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.4 ≥ 0.3 Width (mm) UNE EN ISO 426 Máx. 2.000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 mm Straightness (mm) UNE EN 13956 20 ≤ 50 mm Tensile strength (MPA) EN 12311-2 L, T = 11 MLV Elongation (%) EN 12311-2 L, T = 200 MLV Tear resistance (N) EN 12310-2 L, T = 170 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 -- Dimensional stability (%) EN 1107-2 0.2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV External fire performance EN 13501-5 Broof (t1) Broof (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass MLV Resistance to root penetration EN 13984 Pass Pass Resistance to static loading (20 KG) EN 12730 No cracks MLV Exposure to UV radiation EN 1297 Pass Pass

ROOFING

+34 945 290060 13

Cefil RV1 150 GREY/DARK GREY




Thickness (mm) UNE 53.213-2 1.5 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.6 ≥ 0.3 Width (mm) UNE EN ISO 426 Máx. 2.000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 mm Straightness (mm) UNE EN 13956 20 ≤ 50 mm Tensile strength (MPA) EN 12311-2 L, T = 12 MLV Elongation (%) EN 12311-2 L, T = 200 MLV Tear resistance (N) EN 12310-2 L, T = 190 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 -- Dimensional stability (%) EN 1107-2 0.2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV External fire performance EN 13501-5 Broof (t1) Broof (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass MLV Resistance to root penetration EN 13984 Pass Pass Resistance to static loading (20 KG) EN 12730 No cracks MLV Exposure to UV radiation EN 1297 Pass Pass

ROOFING

Cefil RV2 120 BLACK/BLACK



Application:Roof waterproofing. Not useful for outdoor applications. It has got CE marking certificate corresponding to UNE EN 13956 normative, (nº 0099/CPD/A85/0033), and also N mark of quality product given by AENOR (nº 001/004659).


Thickness (mm) UNE 53.213-2 1.2 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.4 ≥ 0.3 Width (mm) UNE EN ISO 426 Máx. 2.000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 mm Straightness (mm) UNE EN 13956 20 ≤ 50 mm Tensile strength (MPA) EN 12311-2 L, T = 9 MLV Elongation (%) EN 12311-2 L, T = 200 MLV Tear resistance (N) EN 12310-2 L, T = 120 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 -- Dimensional stability (%) EN 1107-2 0.2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV External fire performance EN 13501-5 Broof (t1) Broof (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass MLV Resistance to root penetration EN 13984 Pass Pass Resistance to static loading (20 KG) EN 12730 No cracks MLV

ROOFING

+34 945 290060 15

Cefil RV2 150 BLACK/BLACK




Thickness (mm) UNE 53.213-2 1.5 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.6 ≥ 0.3 Width (mm) UNE EN ISO 426 Máx. 2.000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 mm Straightness (mm) UNE EN 13956 20 ≤ 50 mm Tensile strength (MPA) EN 12311-2 L, T = 10 MLV Elongation (%) EN 12311-2 L, T = 200 MLV Tear resistance (N) EN 12310-2 L, T = 130 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 -- Dimensional stability (%) EN 1107-2 0.2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV External fire performance EN 13501-5 Broof (t1) Broof (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass MLV Resistance to root penetration EN 13984 Pass Pass Resistance to static loading (20 KG) EN 12730 No cracks MLV

ROOFING

Cefil SR

Ceplastik can also supply a wide range of non-reinforcement synthetic membranes (Cefil SR, Novater 80 and Urater) from 0.8 mm thickness to 1.5 mm and with a variety of widths : 1 metre, 1,5 and 2 metres width.




Cefil SR Black / Black 1,2 1 No No Yes

Cefil SR Black / Black 1,2 1,5 No No Yes



Cefil SR Black / Black 1,5 1,5 No No Yes


Novater Black 0,5/0,6/0,8 1 No No No

Novater Black 0,5/0,6/0,8 1,5 No No No

Novater Black 0,5/0,6/0,8 2 No No No

Urater Colour 0,5/0,6/0,8 1 Yes No No

Urater Colour 0,5/0,6/0,8 1,5 Yes No No

Urater Colour 0,5/0,6/0,8 2 Yes No No

ROOFING

Cefil SR (calandered non-reinforced) membranes are specially useful for waterproofing small areas in the roof.

o Outdoors quality.

o High deformation capacity and good resistance to welding, and therefore, good behaviour when used to cover irregularities of the roof.

o Suitable for difficult areas such as chimneys, walls, etc.

o Useful to reinforce overlapping areas and repairing works.

Cefil SR 120 BLACK/BLACK

Description:Flexible sheet of PVC flexible, 1.2 mm of thickness without any reinforcement included. As required, microorganisms resistant.


Cefil SR

+34 945 290060 17


Thickness (mm) UNE 53.213-2 1.2 -5, +10% Width (mm) UNE EN ISO 426 Max. 2000 -0.5, +1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (MPA) EN 12311-2 L, T = 15 MLV Elongation (%) EN 12311-2 L, T = 200 MLV Tear resistance (N) EN 12310-2 L, T = 110 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L, T = 100 MLV Dimensional stability (%) EN 1107-2 2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV External fire performance EN 13501-5 BROOF (t1) BROOF (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass Pass Resistance to static loading (20 kg) EN 12730 Pass MLV

ROOFING

Cefil SR 150 BLACK/BLACK


Description:Flexible sheet of PVC flexible, 1.5 mm of thickness without any reinforcement included. As required, microorganisms resistant.



Thickness (mm) UNE 53.213-2 1.5 -5, +10% Width (mm) UNE EN ISO 426 Max. 2000 -0.5, +1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (MPA) EN 12311-2 L, T = 15 MLV Elongation (%) EN 12311-2 L, T = 200 MLV Tear resistance (N) EN 12310-2 L, T = 110 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L, T = 100 MLV Dimensional stability (%) EN 1107-2 2 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 MLV Shear resistance (N/50 mm) EN 12317-2 500 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV External fire performance EN 13501-5 BROOF (t1) BROOF (t1) Reaction to fire EN 13501-1 E F Resistance to impact (mm) (No cracks) EN 12691 1.000 MLV Watertightness (10 KPA) EN 1928 (B) Pass Pass Resistance to static loading (20 kg) EN 12730 Pass MLV

ROOFING

+34 945 290060 19

Novater 50-60-80 BLACK

Description:Flexible sheet of PVC flexible, 0.5, 0.6, 0.8 mm of thickness, without any reinforcement included.

Application:Not useful for outdoor applications.


Thickness (mm) UNE 53.213-2 Nominal ±10% Width (mm) UNE EN ISO 426 Máx. 2.000 ±1% Tensile strength (MPA) EN 12311-2 L, T = 12 MLV Elongation (%) EN 12311-2 L, T = 180 MLV Tear resistance (N) EN 12310-2 L, T = 50 MLV Dimensional stability (%) EN 1107-2 3 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV Shore A UNE EN ISO 868 63 ± 3 -- Reaction to fire UNE 104.305 Self-Extinguish --

ROOFING

Urater 50-60-80 COLOUR


Description:Flexible sheet of PVC flexible, 0.5, 0.6, 0.8 mm of thickness, without any reinforcement included.

Application:Useful for outdoor exposure in accessories for roofing applications.


Thickness (mm) UNE 53.213-2 Nominal ±10% Width (mm) UNE EN ISO 426 Max. 2000 ±1% Tensile strength (MPA) EN 12311-2 L, T = 14 MLV Elongation (%) EN 12311-2 L, T = 200 MLV Tear resistance (N) EN 12310-2 L, T = 50 MLV Dimensional stability (%) EN 1107-2 3 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV Shore A UNE EN ISO 868 63 ± 3 -- Reaction to fire UNE 104.305 Self-Extinguish --

ROOFING

+34 945 290060 21

Cefil Comprehensive range of AccessoriesCefil roofing solutions are more than just the membrane. An extensive selection of approved associated products to suit a multitude of functions are provided to suit specific needs.

Thermal Insulation: Cefil membranes have been tested and approved for use on many major manufacturers Insulation’s including Mineral wool, Polystyrene, Polyurethane, Cellular glass and Perlite to name a few. Thermal Insulation’s are available as part of the Cefil waterproofing system in warm or Inverted format as Flat and Tapered formats.

ROOFING


PRODUCT DESCRIPTION USE

Cefil SR 1.2mm unreinforced membrane For intricate detailing, forming pipe boots etc. Available in 20 x 1m rolls

Polyvap High density polyethylene film Vapour control layer (1000 Gauge) for mechanical fix systems

Sureprime High bond keying agent Roof primer for bonded VCL membranes

Elastotorch V2 Polymer modified glass reinforced vapour Vapour control layer for concrete, plywood and low profile control layer metal decking

Elastotorch V3 Polymer modified glass reinforced vapour Vapour control layer for most structural decks, suitable for control layer temporary weathering of buildings before main Cefil installation commences

Elastotorch V4 Polymer modified polyester reinforced Vapour control layer for large profiled metal decks

Elastotorch SAVC Polymer modified self adhesive vapour Vapour control layer for most structural decks, suitable for control layer temporary weathering of buildings before main Cefil installation commences

Elastotorch SAVB Polymer modified aluminium lined self Vapour barrier for most structural decks, suitable for adhesive vapour barrier temporary weathering of buildings before main Cefil installation commences

Cefleece 2G 200 g/m2 polyester fleece Separation layer between Cefil and plywood/ timber and brickwork abutments

Cefleece 3G 300 g/m2 polyester fleece Cushion layer between Cefil and substrate, ballast or separation from bitumen

Cefleece 4G 400 g/m2 polyester fleece Heavy duty cushion layer.

Thermobond Solvent free polyurethane Adhesive Bonding compound for Insulation

Cefil contact adhesive Polyurethane Adhesive Bonding compound for Cefil RV

Cefil RVF adhesive Polyurethane adhesive Bonding compound for Cefil RVF

Cepipe Synthetic pipe boot Purpose made collar for SVP’s etc, available in a range of collar sizes

Ceflow Synthetic rain water outlet Purpose made internal rain water outlet for welding to Cefil membranes, available in a range of sizes

Ceflow scupper Parapet synthetic rain water outlet Purpose made scupper outlet for parapet drainage or overflows

Alpha Profile Triangular shaped seam effect raised To create seam effect on roof slopes for aesthetics profile strip (i.e. to look like standing seam, copper or lead roofs)

Cetrack Embossed walkway Membrane protection sheet for light maintenance access, can be reinforced with metal for heavy usage

Cefil metal 2m x1m galvanised sheet with Cefil Detail trims and flashings (i.e. drip edge, upstand chases, membrane laminated on one side copings and the like)

+34 945 290060 23

Green roof systemsThe demand for sustainable and environmentally friendly Green roofs (also known as roof gardens or ‘living’ roofs) has increased dramatically in recent years. The purpose of this section is to provide information about environmentally friendly green roofing systems.

Environmental concerns and the reduction of Carbons are a high priority to many building designs. The increased pressures on Urban land and density levels in built up areas continue to reflect the adverse impacts on drainage, biodiversity, climate conditions, water abstraction and green space.

Simple Green roofs have been around for centuries, such as the Hanging Gardens of Babylon for example, constructed in 600 B.C. Today, modern green roofs need to meet the growing range of requirements attached to increasingly sophisticated building designs.

Formats available:

o Warm roof (Flat or tapered Insulation)o Cold roofo Inverted roof

Finishes available:

o Extensive - Thin lightweight growing medium - minimal maintenanceo Intensive - Deep growing medium (for plants, shrubs, trees, turf etc)o Bio diverse - Recycled aggregate from site - generally left to colonise naturally or seeded with an annual wild flower mix or local seed source.

The Cefil ECO-ROOF system has been designed to offer specifiers and building owners a technologically advanced, sustainable, environmentally friendly, aesthetically pleasing and harmonious Green roof solution which represents an excellent Whole life cost* analysis to a building.

Cefil eco-roof suitable for:

o Metal profiled deckingo Timber decking (Minimum 18mm plywood)o Concrete deck o Roof refurbishment

oCefil

ROOFINGInformative Section


Specific benefits of Cefilo Extended roof life - The Cefil synthetic waterproofing membrane as an exposed finish has a life expectancy of ‘at least 10 years

as actual legislation requires’. As an ECO-ROOF system with a protected green roof, the membrane is not exposed to UV light or mechanical damage. In addition, the vegetation cover moderates the temperature extremes. Therefore the Life expectancy of a Cefil membrane as an ECO-ROOF can be expected to last as much as 50 Years, saving the client the cost of re-waterproofing during the average lifetime of a building and so represents excellent whole life costs.

o Rainwater management - The Cefil ECO-ROOF system retains, absorbs and re-cycles rainwater, thus considerably reducing the water run off returned to the drainage system. In heavy rainfall, excess water run off is delayed, thus reducing the impact on the urban sewerage network. In association with a collective irrigation system (also available as part of the Cefil ECO-ROOF system), excess rainwater can be collected and returned to the roof vegetation in times of drought.

o Energy Management - The Cefil ECO-ROOF system slows a buildings heat gain and loss. The vegetation layer and the trapped air prevent rapid air exchange and high heat gain on the roof surface which improves the energy performance of the building. In addition to the more ambient temperatures of the roof surface, plants transform heat (energy from the sun) and soil moisture into humidity through evapotransporation processes, naturally cooling the building. The result is a reduction of cooling in the building, an extended life span of the roof system, a reduction of heat reflection in to the atmosphere and lower heating and cooling energy costs over the lifetime of the building. Lower energy means less CO2 emitted in to the atmosphere.

o Urban ecology - The Cefil ECO-ROOF can help satisfy a psychological and sociological need by creating a re-assuring planted environment to counter the aggressiveness of city life. Air Quality is improved by the natural aspect of the ECO-ROOF vegetation filtering the air and absorbing polluting particles and a reduction of the heat Island effect, which is the main cause of Ozone pollution. Cefil ECO-ROOFS also provide biodiversity and wildlife for a wide variety of animals, insects and invertebrates.

o Noise and sound reduction - The Cefil ECO-ROOF system can reduce external sound by 8-10db compared with a conventional roof system. The Vegetation barrier and entrapped air within the vegetation acts as a sound Insulation barrier and sound waves are absorbed, reflected or deflected.

o Recyclable materials - Many of the products used within the Cefil ECO-ROOF system are recyclable or made from recyclable building materials, rubber or plastic. Where possible, dependant on project location, the Cefil ECO-ROOF system can re-use secondary aggregates.

o Single source of responsibility - All Cefil ECO-ROOF system components are supplied by Cefil UK ltd, from roof primer to finished planting varieties. Our technical field team and specialist consultants inspect the quality of material and workmanship on a regular basis throughout the contract works. Once the system is complete, our commitment to our clients does not end. Cefil UK will re-inspect the ECO-ROOF plants and vegetation during the buildings retention period (usually 12 months) to ensure establishment of the planting varieties. Additional maintenance packages are also available to suit the client for 2-5 years.

* Whole life cost is the analysis of all relevant and identifiable cashflows regarding the acquisition and use of an asset - definition of whole life costs, The Whole Life cost forum.

** The Urban heat Island effect is the temperature variation between urban areas and the surrounding countryside (also called the Albedo effect) which causes air pollution and Smog.

o


+34 945 290060 25

Extensive

System Description

Green roofing with a thin growing medium requiring minimal maintenance and usually no Irrigation. The vegetation use is resilient and forms a carpet like self-sustaining plant community on the roof. The Cefil Extensive ECO-ROOF system is available as a sedum mat or plug and plant (pre germinated sedum), substrate based roof. Extensive ECO-ROOF systems are much lighter than Intensive and are available for application to Timber and Metal decks as lightweight green roof solutions.

Sedum mats are supplied with a selection of sedum plants including Lydium, Hybrium, Album, Acre, Reflexum, Sexangulare and Spurium which are already cultivated on to a root retention/substrate layer. The varieties are carefully selected to provide colour and variety throughout the year and offer an ‘instant greening’ of the roof finish. The root retention/ substrate comprises a coir-backed membrane with polypropylene mesh for strength, crushed lava rock and specially formulated soil compound. NB: Sedum blankets require the minimum of long-term maintenance.

Typical System build up

o Cefil high bond roof primero Cefil glass fibre 2mm polymer modified bituminous vapour control layer, applied by torch on method (alternative self adhesive available)o Cefil eco-therm RV, CFC, HCFC free and Zero Ozone depletion rated Rigid urethane Insulation, bonded in Cefil adhesive (Insulation thickness to suit required thermal value).o Cefil RP150, High quality BBA certified synthetic waterproofing membrane and complementary fixings.o Cefleece 3g - non woven polyester fleece, loose laido Cedrain - Drainage and reservoir board - loose laido Cefilter - geotextile filtration layer, loose laido Multi layered fertile extensive soil mix (approx 80- 120mm)o Sedum and plant variety mix to suit project location and requirements

o

Example of extensive roof system



Intensive

System Description

Green roofing with a deep growing medium which can sustain Plants, shrubs, planters, trees, paving and turf. Intensive ECO-ROOF requires artificial irrigation and should be treated like any garden with regular maintenance and care. The Intensive ECO-ROOF solutions are the heavier of the two systems due to soil depth and therefore extra structural design is required to sustain the saturated weight and imposed loadings to a building.

Typical System build up

o Cefil high bond roof primero Cefil glass fibre 2mm polymer modified bituminous vapour control layer, applied by torch on method (alternative self adhesive available)o Cefil eco-therm RV, CFC, HCFC free and Zero Ozone depletion rated Rigid urethane Insulation, bonded in Cefil adhesive (Insulation thickness to suit required thermal value).o Cefil RP150, High quality BBA certified synthetic waterproofing membrane and complementary fixings.o Cefleece 4g - non woven polyester fleece, loose laido Cedrain - Drainage and reservoir board - loose laido Cefilter - geotextile filtration layer, loose laido Multi layered fertile extensive soil mix (approx 275-300mm)o Sedum, grasses, shrubs, small trees, hard landscaping.Example of intensive roof system

o


+34 945 290060 27

Cefil synthetic roofing systems have been used extensively through specification via architects or as the product of choice for building owners, main contractors and specialist roofing contractors. This is a small selection of successfully completed projects that are protected with Cefil waterproofing roof systems.

ProjectPorfolio


ROOFING

Project Porfolio PROJECT MATERIAL USED YEAR OF SYSTEM USED QUANTITY USED APPLICATION

Group of Houses in Den Haag Cefil RP 1,2 1997 Mechanically fixing 4.000 mt2 (Netherlands)

“Barones” Commercial Center, Cefil RP 1,2 1.995 Mechanically fixing 6.000 Mt2Breda (Netherlands)

“Franklin” Industrial Pavillion, Cefil RP 1,5 1.998 Mechanically fixing 12.000 Mt2Dortmund (Germany)

“Tulip” Head Quarters, Cefil RP 1,2 1.997 Mechanically fixing 5.000 Mt2Utritch (Netherlands)

“Chasse” Theater, Cefil RP 1,2 1.994 Mechanically fixing 9.000 Mt2Breda (Netherlands)

Offices Building Rotterdam Cefil RP 1,5 2.000 Mechanically fixing 4.000 Mt2(Netherlands)

“Sittard” Station, Cefil RP 1,5 2.001 Mechanically fixing 2.000 Mt2Breda (Netherlands)

Topsport Stadium, Cefil RP 1,2 2.002 Mechanically fixing 8.000 Mt2Den Haag (Netherlands)

Eroski, Cefil RP 12 2.002 Mechanical systems 14.000 Mt2Abadiño, Spain

Olympic Swimming Pool for Cefil DW RP 1,5 2.003 Mechanically fixing 6.000 Mt2the World Championship, Buildt in 3 weeksBarcelona, Spain New system that allows to insert a swimmingpool in a Multisports Stadium

“La Roca Village” Commercial Center, Cefil RV 1,5 2.003 Ballasted roof 7.500 Mt2Barcelona, Spain

Palacio de Exposiciones y Congresos Cefil RV 1,2 2.001 Ballasted roof 8.000 Mt2de Merida, Merida, Spain

Control Points. Barajas Airport Cefil RV 1,2 Grey 2.003 Ballasted roof 12.500 Mt2Madrid, Spain

“Ciudad de las Artes y las Ciencias” Cefil RV 1,2 2.000 Ballasted roof Parking 9.000 Mt2Valencia, Spain

Bilbao Exhibition Center Cefil T 150 Transparent 2.002/2.003 Foundations 50.000 Mt2Bilbao, Spain

Gorbeia Commercial Centre Cefil RP 120 2.001 Parking 7.000 Mt2Vitoria, Spain

Eroski Commercial Centre Cefil RP 150 2.002 Mechanical fixing 12.000 Mt2Miranda, Spain

Orona Factory Cefil RP 1,5 2.003/2.004 Mechanical fixing 23.000 Mt2Hernani, Spain

Fagor Garagarza Factory Cefil RP 150 2.001 Mechanical fixing 20.000 Mt2Mondragon, Spain

Irizar Factory Cefil RP 150 2.004 Mechanical fixing 2.000 Mt2Ormaiztegi, Spain

Industrial Site Cefil RP 150 2.003 Mechanical fixing 7.000 Mt2Hernani, Spain

+34 945 290060 29

ROOFING

Cefil roof assured Warranty Schemes

Cefil Roof Assured Warranty Schemes are available for all installations and pro-vide specifiers and building owners with comprehensive cover and peace of mind to back their judgement in selecting a Cefil Waterproofing Solution.

An individual warranty certificate, issued for every project.

Mercedes - Benz World


Valencia City of Arts & Science

The ultimate Mercedes Benz experienceMercedes Benz world is the UK’s largest automotive brand experience centre. Located at Surrey’s world famous

Brooklands circuit, the birthplace of British Motorsport and Aviation, this impressive destination offers visitors simula-

tor rides, interactive challenges, enthralling exhibits and the opportunity to drive high performance Mercedes-Benz

vehicles around 2.5km of handling circuits. Over 10,000m2 of Cefil synthetic membranes were selected to provide the

waterproofing solutions to this prestigious project.

+34 945 290060 31

Where beauty and knowledge intertwineThe Valencia City of Arts and Science is a futuristic ‘city within a city’ and demonstrates some of Europe’s most awesome

architectural achievements. The breathtaking structures are home to the science museum, oceanarium, planetarium

and opera house and attract millions of visitors every year. Cefil waterproofing membranes were chosen for the

waterproofing of this exciting and imaginative project on many key areas.

RESERVOIRS

Cefil RESERVOIRSCefil reservoirs (calandered non-reinforced) membranes suitable for waterproofing reservoirs and ponds, even in contact with drinking water.

o Outdoors quality

o PVC membrane, not reinforced, 1,2 mm thickness, outdoors quality, for waterproofing the bottom area of the pond.

o PVC membrane, polyester reinforced, 1,2 mm thickness, outdoors quality, to be placed in the slopes and deck areas.


CEFIL RESERVOIRS



Cefil RP Grey or Blue 1,2 2 Yes Polyester Net Yes

Cefil RP Grey or Blue 1,5 2 Yes Polyester Net Yes

Cefil SR Grey or Blue 1,2 2 Yes No Yes

Cefil SR Grey or Blue 1,5 2 Yes No Yes

Cefil DW Grey 1,2 2 Yes No Yes (drinking water)

Cefil RP 120

Description:Flexible sheet of PVC flexible, 1.2 mm of thickness, with polyester reinforcement included. As requiered, microorganisms resistant.

Application:Geosynthetic barriers. Useful for outdoor applications. It has got CE marking certificate corresponding to UNE EN 13361, (nº 0099/CPD/A86/0006), and also N mark of quality product given by AENOR (nº 001/004669).

Cefil RESERVOIRS

+34 945 290060 35

CEFIL RESERVOIRS


Thickness (mm) UNE 53.213-2 1.2 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.4 ≥ 0.3 Width (mm) UNE EN ISO 426 Máx. 2000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (N/50 mm) EN 12311-2 L,T = 1000 MLV Elongation (%) EN 12311-2 L, T = 15 MLV Tear resistance (N) EN 12310-2 L,T = 250 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 MLV Dimensional stability (%) UNE 104302 0.2 MLV Static puncture (N) EN ISO 12236 1500 MLV Wheatering resistance (3000 hours) EN 12224 15 ≤ 25% Oxidation (%) (85ºC, 90 days) EN 14575 15 ≤ 25% Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 -- Shear resistance (N/50 mm) EN 12317-2 500 -- Foldability at low temperature (-30ºC) EN 495-5 No cracks --

Colours:GREY/GREY, BLUE/BLUE. Other colours are available under request.

Cefil RP 150 AZ


Description:Flexible sheet of PVC flexible, 1.5 mm of thickness, with polyester reinforcement included. As requiered, microorganisms resistant.


CEFIL RESERVOIRS


Thickness (mm) UNE 53.213-2 1.5 Nom. -5,+10% Thickness in the net cross (mm) UNE 104302 0.6 ≥ 0.3 Width (mm) UNE EN ISO 426 Máx. 2000 Nom. -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (N/50 mm) EN 12311-2 L,T = 1000 MLV Elongation (%) EN 12311-2 L, T = 15 MLV Tear resistance (N) EN 12310-2 L,T = 250 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 MLV Dimensional stability (%) UNE 104302 0.2 MLV Static puncture (N) EN ISO 12236 1500 MLV Wheatering resistance (3000 hours) EN 12224 15 ≤ 25% Oxidation (%) (85ºC, 90 days) EN 14575 15 ≤ 25% Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 -- Shear resistance (N/50 mm) EN 12317-2 500 -- Foldability at low temperature (-30ºC) EN 495-5 No cracks --


+34 945 290060 37

Cefil SR 120 AZ

Description:Flexible sheet of PVC flexible, 1.2 mm of thickness, without any reinforcement included. As requiered, microorganisms resistant.


CEFIL RESERVOIRS


Thickness (mm) UNE 53.213-2 1.2 Nom. -5,+10% Width (mm) UNE EN ISO 426 Máx. 2.000 -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (MPA) EN 12311-2 L, T = 16 MLV Elongation (%) EN 12311-2 L, T = 250 MLV Tear resistance (N) EN 12310-2 L, T = 110 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 MLV Dimensional stability (%) EN 1107-2 2 MLV Static puncture (N) EN ISO 12236 1500 MLV Wheatering resistance (3000 hours) EN 12224 15 ≤ 25 % Oxidation (%) (85ºC, 90 days) EN 14575) 15 ≤ 25 % Joint strength: Peel resistance (N/50 mm) EN 12316-2 250 MLV Shear resistance (N/50 mm) EN 12317-2 600 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV


Cefil SR 150 AZ


Description:Flexible sheet of PVC flexible, 1.5 mm of thickness, without any reinforcement included. As requiered, microorganisms resistant.


CEFIL RESERVOIRS


Thickness (mm) UNE 53.213-2 1.5 -5,+10% Width (mm) UNE EN ISO 426 Máx. 2.000 -0.5,+1% Flatness (mm) UNE EN 13956 5 ≤ 10 Straightness (mm) UNE EN 13956 20 ≤ 50 Tensile strength (MPA) EN 12311-2 L, T = 16 MLV Elongation (%) EN 12311-2 L, T = 250 MLV Tear resistance (N) EN 12310-2 L, T = 110 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T = 100 MLV Dimensional stability (%) EN 1107-2 2 MLV Static puncture (N) EN ISO 12236 1500 MLV Wheatering resistance (3000 hours) EN 12224 15 ≤ 25 % Oxidation (%) (85ºC, 90 days) EN 14575) 15 ≤ 25 % Joint strength: Peel resistance (N/50 mm) EN 12316-2 250 MLV Shear resistance (N/50 mm) EN 12317-2 600 MLV Foldability at low temperature (- 30º C) EN 495-5 No cracks MLV


+34 945 290060 39

Cefil DW 120 GREY

Description:Soft PVC membrane of 1.2 mm of thickness, without any reinforcement included. Useful for contact with drinking water.

Application:Building of drinking water recervoirs (outdoors aplications). It has got CE marking certificate corresponding to UNE EN 13.361 Normative, (nº 0099/CPD/A86/0006), and also N mark of quality product given by AENOR. Global migration according to european standard 96/11/CEE for materials in contact to drinking water.

CEFIL RESERVOIRS


Thickness (mm) UNE 53.213-2 1.2 Nom. 1.2,±10% Width (mm) UNE EN ISO 426 Nom. ± 1% Nom. ± 1% Tensile strenght (MPa) EN 12311-2 L= 18, T= 16 L,T≥ 15 Elongation at break (%) EN 12311-2 350 L,T≥ 250 Tear resistence (N) EN 12310-2 L= 70, T= 65 L≥ 60, T≥50 Adherence between layers (N/50 mm) UNE EN ISO 527-1 L,T = 100 L,T≥90 Dimmensional stability (%) UNE 104302 L,T= 1.5 ≤ 2 Cold bending (-20ºC) EN 495-5 Whithout cracks Whithout cracks Oxidation (%) (85ºC, 90 days) EN 14575 15 ≤ 25% Exposure to uv radiation (3.000 hours) EN 12224 15 ≤ 25% Statiic puncture test EN ISO 12236 1500 MLV Joint strength: Peel resistance (N/50 mm) EN 12316-2 200 -- Shear resistance(N/50 mm) EN 12317-2 500 -- Global migration (%) ENV 1186/3 5.4 ≤ 10

TUNNELSTUNNELS

Cefil ALL THE POSSIBILITIES

CHARACTERISTICSCEFIL T membranes offer the following advantages:

Variety of range:CEFIL T membranes are offered in transparent and black (inc. yellow signal layer) finishes. The thickness of the membranes are 1,5 and 2 mm ,fulfilling the European Regulations.

Guarante:Due to the certified quality of our membranes, we offer in our range a self-life guarantee of 10 years.

Service:Our policy for customer service is reflected in that delivery terms are adapted to the needs of every project

Quality:Our membranes have been certified not only in the Spanish but also in several European markets.

INSTALLATION RECOMMENDATIONS

Tunnel phases.


TUNNELS

CEFIL T membranes offer easy solutions to complex problems for every tunnel waterproofing system as well as channels and civil engineering

1 2 3 4

TENSILE PRODUCT COLOUR THICKNESS WIDTH % ELONGATION STRENGTH CE MARKING FUNGICIDE (mm) (M) MPa TREATMENT

Cefil T SIGNAL Yellow / Black 1,5 2 250 15 Yes No Cefil T SIGNAL Yellow / Black 2 2 250 15 Yes No

Cefil T SIGNAL ELO Yellow / Black 1,5 2 300 15 Yes No Cefil T SIGNAL ELO Yellow / Black 2 2 300 15 Yes No

Cefil T TRANS Transparent 1,5 2 350 15 Yes No Cefil T TRANS Transparent 2 2 350 15 Yes No

Cefil T TRANS FUNG Transparent 1,5 2 350 15 Yes Yes Cefil T TRANS FUNG Transparent 2 2 350 15 Yes Yes

Cefil T SIGNAL Yellow-Black

Description:Flexible sheet of PVC flexible. Not resistant to bitumen.

Application:Geosynthetic barriers. Used as a fluid barrier in the construction of tunnels and underground structures. It has got CE marking certificate corresponding to UNE EN 13491, (nº 0099/CPD/A86/006),.

Cefil ALL THE POSSIBILITIES

+34 945 290060 43

TUNNELS

TEST METHOD USUAL VALUES UNE EN 13491 ESPECIFICATION

Thickness (mm) EN 1849-2 ≥1.2 MLV Nom. -5,+10% Width (mm) EN 1848-2 1000-2000 Not applies Nom. -0.5,+1% Flatness (mm) EN 1848-2 ≤ 5 Not applies Straightness (mm) EN 1848-2 ≤ 25 Not applies Tensile strength (N/50 mm) EN 12311-2 L,T≥ 15 MLV Elongation (%) EN 12311-2 L,T ≥ 250 MLV Tear resistance (N) EN 12310-2 L,T ≥ 220 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T ≥ 90 Not applies Dimensional stability (%) EN 1107-2 ≤ 2.0 Not applies Joint strength: Peel resistance (N/50 mm) EN 12316-2 ≥ 200 Not applies Shear resistance(N/50 mm) EN 12317-2 ≥ 500 Not applies Static puncture test (KN) EN 12236 ≥ 2.2 MLV Resistance to oxidation (85ºC, 90 days) EN 14575 ≤ 15% ≤ 25% (loss of mechanical properties) Foldability at low temperature EN 495-5 No cracks Pass ≤ - 20º C Resistance to root penetration EN 13948 Pass MLV Waterproof resistance (72 hours, 4 bar) DIN 16726-5.11 Waterproof Waterproof


TUNNELS


Application:Geosynthetic barriers. Used as a fluid barrier in the construction of tunnels and underground structures. It has got CE marking certificate corresponding to UNE EN 13491, (nº 0099/CPD/A86/006). Maximum elongation.


Thickness (mm) EN 1849-2 ≥1.2 MLV Nom. -5,+10% Width (mm) EN 1848-2 1000 - 2000 Not applies Nom. -0.5,+1% Flatness (mm) EN 1848-2 ≤ 5 Not applies Straightness (mm) EN 1848-2 ≤ 25 Not applies Tensile strength (N/50 mm) EN 12311-2 L,T ≥ 16 MLV Elongation (%) EN 12311-2 L,T ≥ 300 MLV Tear resistance (N) EN 12310-2 L,T ≥ 250 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T ≥ 90 Not applies Dimensional stability (%) EN 1107-2 ≤ 2.0 Not applies Joint strength: Peel resistance (N/50 mm) EN 12316-2 ≥ 200 Not applies Shear resistance(N/50 mm) EN 12317-2 ≥ 500 Not applies Static puncture test (KN) EN 12236 ≥ 2.2 MLV Resistance to oxidation (85ºC, 90 days) EN 14575 ≤ 15% ≤ 25% (loss of mechanical properties) Foldability at low temperature EN 495-5 No cracks Pass ≤ - 20º C Resistance to root penetration EN 13948 Pass MLV Waterproof resistance (72 hours, 4 bar) DIN 16726-5.11 Waterproof Waterproof

Cefil T SIGNAL ELO Yellow-Black

Cefil T TRANSPARENT


Application:Geosynthetic barriers. Used as a fluid barrier in the construction of tunnels and underground structures. It has got CE marking certificate corresponding to UNE EN 13491, (nº 0099/CPD/A86/006),.

+34 945 290060 45

TUNNELS


Thickness (mm) EN 1849-2 ≥1.2 MLV Nom. -5,+10% Width (mm) EN 1848-2 1000 - 2000 Not applies Nom. -0.5,+1% Flatness (mm) EN 1848-2 ≤ 5 Not applies Straightness (mm) EN 1848-2 ≤ 25 Not applies Tensile strength (N/50 mm) EN 12311-2 L,T≥ 16 MLV Elongation (%) EN 12311-2 L,T ≥ 350 MLV Tear resistance (N) EN 12310-2 L,T ≥ 220 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T ≥ 90 Not applies Dimensional stability (%) EN 1107-2 ≤ 2.0 Not applies Joint strength: Peel resistance (N/50 mm) EN 12316-2 ≥ 200 Not applies Shear resistance(N/50 mm) EN 12317-2 ≥ 500 Not applies Static puncture test (KN) EN 12236 ≥ 2.2 MLV Resistance to oxidation (85ºC, 90 days) EN 14575 ≤ 15% ≤ 25% (loss of mechanical properties) Foldability at low temperature EN 495-5 No cracks Pass ≤ - 20º C Resistance to root penetration EN 13948 Pass MLV Waterproof resistance (72 hours, 4 bar) DIN 16726-5.11 Waterproof Waterproof


TUNNELS

Description:Flexible sheet of PVC flexible. Not resistant to bitumen. Resistant to contact with microorganisms.

Application:Geosynthetic barriers. Used as a fluid barrier in the construction of tunnels and underground structures. It has got CE marking certificate corresponding to UNE EN 13491, (nº 0099/CPD/A86/006).

Cefil T TRANSPARENT FUNG


Thickness (mm) EN 1849-2 ≥1.2 MLV Nom. -5,+10% Width (mm) EN 1848-2 1000 - 2000 Not applies Nom. -0.5,+1% Flatness (mm) EN 1848-2 ≤ 5 Not applies Straightness (mm) EN 1848-2 ≤ 25 Not applies Tensile strength (N/50 mm) EN 12311-2 L,T≥ 16 MLV Elongation (%) EN 12311-2 L,T ≥ 350 MLV Tear resistance (N) EN 12310-2 L,T ≥ 220 MLV Interlaminar adhesion (N/50 mm) UNE EN ISO 527-1 L,T ≥ 90 Not applies Dimensional stability (%) EN 1107-2 ≤ 2.0 Not applies Joint strength: Peel resistance (N/50 mm) EN 12316-2 ≥ 200 Not applies Shear resistance(N/50 mm) EN 12317-2 ≥ 500 Not applies Static puncture test (KN) EN 12236 ≥ 2.2 MLV Resistance to oxidation (85ºC, 90 days) EN 14575 ≤ 15% ≤ 25% (loss of mechanical properties) Foldability at low temperature EN 495-5 No cracks Pass ≤ - 20º C Resistance to root penetration EN 13948 Pass MLV Waterproof resistance (72 hours, 4 bar) DIN 16726-5.11 Waterproof Waterproof Resistance to microorganisms ISO 846 Resistant MLV

List of References

+34 945 290060 47

TUNNELS


Application:Geosynthetic barries. Used as a fluid barrier in the construction of tunnels and underground structures. It has got CE marking certifi-cate corresponding to UNE EN 13491, (nº 0099/CPD/A86/006),.

PROJECT MATERIAL USED YEAR OF QUANTITY USED APPLICATION

Tunnel of High Speed Train Cefil T 200 2.000 120.000 mt2 Tarragona (Spain)

Tunnel of High Speed Train in Oroso Cefil T 200 1.999 82.000 Mt2(Spain)

Tunnel of Villaviciosa Cefil RP T 200 2.001 240.000 Mt2(Spain)

Tunnel of High Speed Train Cefil T 200 2.003 145.000 Mt2Matorell (Spain)

Tunnel Piedrafita Cefil T 200 2.000 65.000 Mt2(Spain)

Tunnel Ave Alora-Malaga Cefil T 300 2.003 70.000 Mt2(Spain)

Tunnel del Pino Cefil T 150 2.004 5.000 Mt2Nerja-Almuñecar (Spain)

Bilbao Metro (Line B) Cefil T 200 2.002 25.000 Mt2Bilbao (Spain)

Tunnel of Bierzo -- 1.997 20.000 Mt2(Spain)

Tunnel of Mejorada -- 1.999 17.000 Mt2(Spain)

Edicar Plasticos manufacturing process

We make use of the most avanced technology

At Edicar Plasticos SL we are aware of the needs for continuous improvement in our equipment. That is

why we follow a policy for progressive renivation

which allows us to maintain a leading position in

the market. For such aim we have sophisticated

equipment, incluiding 2 calenders, 2,10m wide, with

the most advanced technology.

They allow us to manufacture up to 20.000 tones/year

with the highest quality.

We believe quality is not controlled but produced. That is why, from the reception of the raw materials,

improvement that finishes after the final product is

delivered to the customer.

This quality commitment not only involves Edicar

Plasticos SL in a productive and technological point

of view, but also as an individual responsibility for our

human resources.

According to our philosophy for continuous

improvement, our manufacturing process is approved

under ISO 9002 quality certificate.


Edicar Plasticos SL starts a process of continuous

Following this idea, our CEFIL materials, used for

waterproofing applications, are approved by AENOR

Spanish Certification Association and European

prestigious institutes such as BDA, KOMO or SKZ among

others, focusing this product line internationally.

Edicar Plasticosapproved quality

We offer the best guarantees for our manufacturing process

Edicar Plásticos S.L. reserves the right to alter or amend the specification/contents of this brochure without notice,

as our policy is one of constant improvement. Information contained within this specification brochure is

believed to be correct at the date of publication. Cefil UK offer a free technical advisory and specification

service, whose advice should be sought when selecting Cefil products.

Advanced Waterproofing

Technology

Phone: +34 945 290060 Fax: +34 945 290348 www.edicarplasticos.com Email: [email protected]

Edicar Plásticos, S.L.Pol. Ind. Jundiz C/Jundiz s/nº01015 Vitoria-Gasteiz

Edition: 00 February 2009

Edicar Plásticos

Documents

CATALOGO CEFIL NUEVO