Catalogue 2019 - EX Protect Protect and Heat Catalogue 201… · • KE9 250 X 400 X 125 • KE91 250 X 600 X 125 • KE10 405 X 400 X 125 • KE11 250 X 255 X 165 • KE12 250 X

Catalogue 2019

GRP Enclosures

• Glass fibre reinforced Polyester

• High IP protection class

• Corrosion resistance

• Impact resistance

• ATEX / Explolabs certification

• Drilled and populated as per customers requirements

GRP Enclosures

Sizes • KE1 75 X 80 X 60 • KE2 75 X 110 X 60 • KE3 75 X 160 X 60 • KE31 75 X 190 X 60 • KE32 75 X 230 X 60 • KE4 120 X 125 X 90 • KE5 120 X 220 X 95 • KE51 160 X 160 X 95 • KE6 160 X 260 X 95 • KE7 160 X 360 X 95 • KE71 160 X 560 X 95 • KE8 250 X 255 X 125 • KE9 250 X 400 X 125 • KE91 250 X 600 X 125 • KE10 405 X 400 X 125 • KE11 250 X 255 X 165 • KE12 250 X 400 X 165

Stainless Steel Enclosures

• For use in Industrial and Hazardous areas

• ATEX / Explolabs Certification

• 316 Stainless steel

• IP 66

• Multi or single hinged lids

• Drilled and populated as per customers requirements

Stainless Steel Enclosures Sizes • Sasol Material Number: 2220047 SS 316 Junction box; style 2 way; rectangular • Sasol Material Number: 2220057 SS 316 Junction box; transition; style 2 way; square ;

dimensions wd 300 x 300 x 150 • Sasol Material Number: 2220058 SS 316 Junction box; transition; style 2 way; rectangular

; dimensions wd 380 x lg 450 x ht 200 mm • Sasol Material Number: 2220059 SS 316 Junction box; transition; style 2 way; square ;

dimensions square 480 x ht 200 mm • Sasol Material Number: 2220060 SS 316 Junction box; transition; style 2 way; rectangular

; dimensions wd 450 x lg 620 x ht 200 mm • Sasol Material Number: 2220061 SS 316 Junction box; transition; style 2 way; rectangular





dimensions square 600 x ht 250 mm • Sasol Material Number: 2220066 SS 316 Junction box; transition; style 2 way; rectangular




dimensions square 300 x ht 150 mm • Sasol Material Number: 222071 SS 316 Junction box; transition; style 2 way; rectangular ;

dimensions wd 400 x lg 600 x ht 200 mm • Sasol Material Number: 222075 SS 316 Junction box; transition; style 2 way; rectangular ;

dimensions wd 260 x lg 350 x ht 150 mm

We are not limited to the above sizes – we mention these as they are the most popular

Control Stations

• Polyesther reinforced with glass fibre enclosures / stainless steel

• Colour black / 316 Stainless steel • IP 66 • Equipped with built in devices - Control devices - Indicating lamps - Pushbuttons - Control switches - Ammeters • ATEX / Explolabs certification

Control Stations

Motor Starter Controller

• 316 Stainless steel with rain canopy

• Explolabs certification

Rechargeable Worklight

• COB LED

• Switch mode – Dim / Middle / High / Off

• 1200/ 2400 Lux @ 0,5 m (step 1 / 2)

• Battery life: 2hr / 4hr (step 1 / 2)

• 0⁰ - 180⁰ angle adjustment

• 2 hr charging

• Battery type and capacity – Lithium iron phosphate 19.2v / 1400mAh

• Power rating 14w

• IP 65


• Accessories : Magnetic Bracket ; Scaffolding Bracket ; Tripod

AC Worklight

• COB LED

• Switch mode – Low / High

• 1600/ 3200 Lux @ 0,5 m (step 1 / 2)

• 22.8 Watts / 220 - 240 VAC

• Input current 0.4 Amps max

• IP 65

• 10 metre cable with CEAG 16A plug

• Accessories : Magnetic Bracket ; Scaffolding Bracket ; Tripod


Worklight Accessories

Magnetic Bracket

• Two extremely powerful rubber cased magnets

• A holding force of more than 10 kg each

• The light can be tilted to the desired angle once mounted


Scaffolding Bracket

• Designed to attach lights to scaffolding with a diameter of 40 – 50 mm

• The light can be tilted to the desired angle once mounted


Tripod

• Designed to meet any working situation in hazardous areas where illumination in various heights and angles is key

• Extendable to 3 meters

Rechargeable Torch

• COB LED / Spot: SMD LED

• 190/380 Lux @ 0,5 m / Spot: 350 Lux @ 0,5 m

• Battery life: 6hr / 3hr (step 1 / 2) / Spot 3h

• Adaptor DC 5 V / 2A

• Battery type and capacity – Lithium iron phosphate 3.2 V / 2800MAH 8.96 Wh

• Power rating 2.5W

• 4 hr charging

• IP 65

• Battery capacity indicator / charging base / adaptor / magnetic base / hook


LED Light Fittings

• Material : GRP; 7J impact; Corrosion proof

• Diffuser : Polycarbonate, 90% light transmission

• Power : 9w – 28w

• IP 67

• ATEX / Explolab certification

Fluorescent Light Fittings

• Housing: SMC polyester plastic reinforced with glass fiber, color RAL 7038

• T8 fluorescent lamps in parallel configuration

• Switch with safety lock; when opening the central lock, all poles of the volt-age supply to the ballast are discon-nected

• In case of a lamp fault, the electronic ballast disconnects the defective lamp from the power supply

• IP66


Exin Zone 0 Light

• 720 Lumens

• 9.6 v Rechargeable Nickle metal hybride battery

• 10 – 12 Hours running time

• 8 Hours charging time

• LED light type

• Manufactured in Australia

• Gas group IIC zone 0


Electrical Trace Heating Tape & Accessories

Electrical Trace Heating Tape & Accessories

• Self-regulating, constant wattage and heat trace cable, suitable for hazardous areas

• Temperature Sensors for Hazardous areas

• Control panels with digital temperature control over temperature protection & thyristor control

Electric Trace Heating Tape •FS+ is a high temperature self-regulating heating cable, having an exposure limit of 225ºC, energised or not. •It may be provided with a continuous extruded metal jacket for applications where high mechanical strength is required or a metal braid where flexibility is preferred. •External temperature controls not necessary.

Electric Trace Heating Tape

• 250ºC exposure temperature withstand, (energised or switched off).

• High power outputs to 100W/m at 10ºC

• Inherently temperature-safe. (ITS)

• External temperature controls not necessary

Electric Trace Heating Tape

• Automatically adjusts heat output in response to increasing or decreasing pipe temperature.

• Can be cut-to-length with no wastage.

• Will not overheat or burnout, even when overlapped.

• Approved for use in non-hazardous, hazardous and corrosive environments.

• Available up to 277 VAC.

Electric Trace Heating Tape Accessories

Termination kits

• The kits are available for safe and hazardous areas and contain all the parts required for connection to the power and to terminate the end of the cable.


Connectors

• The StripFree range of connectors is a universal power termination and splicing system for use with self-regulating heating cables.

• No special tools are needed to perform a neat, convenient and simple termination.

• Installation comprises simply cutting to length the heater and removal of the outer sheath (if applicable).

• The heating cable is inserted into the StripFree unit and the connection is made by screwing down the cutting blades onto the buswires, whilst

automatically clamping the braid.


Junction Boxes

• Are used to make reliable connections between heating cables, cold lead cables and a power cable.

• The box can be either wall mounted or pipe mounted using various support brackets.


Thermostat

• Line and ambient sensing thermostats are used for maintaining proper viscosity in process temperature control or freeze protection applications.

Electric Trace Heating Tape Chlorex

• Insulation end kit

• Flange

• Fluoropolymer heat tape 150 degrees

• Fluoropolymer heat tape 200 degrees

• Insulation end seal

• Trace heating junction box

• Trace heating strapping

Flameproof Heaters

Manufactured to customers specification

Mineral Insulated Cables (Pyro)

• MI cables are used for high temperature environments

• Cables made to customer specifications / requirements

•

Bossed Heaters

• Made to customers requirements

• 2 Inch Bossed heater

Mobile Communication - Cellphone

IS320.1 9 • AndroidTM 4.4 • 3G (GSM/WCDMA) • Bluetooth® 2.0 • Near Field Communication • 2.4“ (6.1 cm) RugDisplay-Glass • with a resolutionof 240 x 320 pixel • camera: 2 MP rear camera • external memory micro SD up to 32

GB • SOS button with emergency call

functionality • optional: Lone Worker Protection &

Push to Talk (application of another provider needed)

• Zone 1 / 21 • ATEX / Explolabs certification

Mobile Communication - Cellphone

IS 520.2 • AndroidTM 7.1 • 4G (LTE) • Bluetooth® 4.1 LE • Near Field Communication • 4,5“ (11.43 cm) • Capacitive touchscreen • 2 cameras: 8 MP rear camera with

autofocus and 5 MP front camera • MicroSD-card slot up to 32 GB • quick charge • optional: Lone Worker Protection &

Push to Talk (application of another provider needed)

• Zone 2/22 • ATEX / Explolabs certification

Plugs & Sockets – EATON (CEAG)

Extension Leads

• 25 metres cable and plug

• Choice of 3 or 4 mounted sockets

• 220 vac

• 16A

Brainchild Controllers

GUBS

• Zone 1, 2, 21, 22

• Group IIC

• Aluminum junction boxes

• Glass or solid lid

• IP66

• Choice of 8 sizes


GUB with Glass Window

Flameproof Enclosures

• Manufactured to customers specifications

Ex Grounding and Grounding Control Device

• Zone 1;21

• Active grounding unit for static grounding and permanent monitoring

• Permanent removal of electrostatic charge during filling or emptying of tanks (trucks; railcar tanks, barrels)

• Local certification

CCG Glands

• CCG Glands

• CCG Blanking Plugs

• CCG Junction Boxes

Documents

Catalogue 2019 - EX Protect Protect and Heat Catalogue 201… · • KE9 250 X 400 X 125 • KE91 250 X 600 X 125 • KE10 405 X 400 X 125 • KE11 250 X 255 X 165 • KE12 250 X