Upload
phungthu
View
221
Download
1
Embed Size (px)
Citation preview
YO
UR
WIS
HES
AR
E O
UR
BEN
CH
MA
RK
02
Underfloor distributors
Catalogue
2 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
Table of Contents
PIAZZA
Page 3
PICCOLINO /RETRANT
Pages 4-7
Introduction
Page 21 Page 22
PICCOLINO RETRANT
Page 5
PIAZZA 540
Page 13
CAMPETTO VCAMPETTO
Pages 12-16
Page 20
Installation instructions
Page 14
CAMPETTO VI
Page 15
CAMPETTO VII
Page 6
PIAZZA 700
Page 7
PIAZZA 1000
Page 16
CAMPETTO VIII
Pages 17-19
Practicalexamples
Pages 8-10
Practicalexamples
Page 23
Practicalexamples
Page 11
Installation instructions
Pages 21-23
CAMPETTO
Pages 17-20
PIAZZA
Pages 8-11
Page 12
OverviewCAMPETTO
Page 4
OverviewPIAZZA
3Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
Introduction
Underfloor distributors virtually invisible - always within reach
Thanks to our underfloor distributors, electrical power is quickly available anywhere and without time-consuming installation work! As with all of our products, we attach great importance to high-quality componentsand manufacturing. Only solid rubber distributors made in-house, with their outstanding material properties, are used.
The benefits for you
- Power available at any time and quickly - Ready for use immediately - Can be walked or driven over during operation - No power cables lying around, no danger of tripping - Covers can be individually filled / paved - Lockable in the contacted area - Gas springs for force-free, automatic opening - Frost-proof operation thanks to cover heating - Flooding-resistant on request - Maintenance-free solid rubber distributor system for electricity, water,
compressed air and data connections, fittings as per the client's wishes
Our services
- Personalised, professional advice, including on site - Tried-and-tested product range - Tailored, customised solutions - Production of single and large series - Long spare parts availability
The structure of an underfloor distributor
Electric supply line
Flexible connecting cable
Cable opening (for closed operation)
Connecting set
Outlet for drainage
Power distributor
Gas spring
Earthing plugs
Built in accordance with: - BGA V1 and BGA V3 - VDE 0100 Part 410 and 540 - VDE 0660 Part 500 - VDE 0660 Part 501 - depending on design - VDE 0471
The right choice
The following questions need to be answered in order to choose the right underfloor distributor:
1. What power connections are wanted?The size of the solid rubber distributor is defined by the socket occupancy and type of fuses used. The distributor is mounted on the cover of the underfloor distributor. The size of the power distribution also defines the junction box. We will be happy to provide more detailed information and explanations.
2. Where will the underfloor distributor be installed?Information regarding internal or external installation, along with how it will be used, is useful for ensuring the best possible design.
3. Does the underfloor distributor need to be able to withstand traffic?Your underfloor distributor is designed specifically for your needs. The higher the weight, the stronger the underfloor distributor and the foundations need to be.
4. Do you want the cover to be filled?If your underfloor distributor is to blend in perfectly with its surroundings, filling of the cover is required. There are no restrictions on the type of filling that can be used (cobbles, wood, tar, etc.).
5. Is drainage guaranteed?In order to protect the underfloor distributor from water damage, drainage must be guaranteed through the preparation of appropriate drainage (this is always the client's responsibility).
4 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
Overview of PIAZZA 540 / 700 / 1000
Technical data PIAZZA 540 PIAZZA 700 PIAZZA 1000
Area of use Internal / external area Internal / external area Internal / external area
Classification as per EN 124 400kN (40t) / D400 400kN (40t) / D400 400kN (40t) / D400
Cover Covers can be individually filled / paved580x580x70mm
Covers can be individually filled / paved700x700x70mm
Covers can be individually filled / paved1000x1000x70mm
Weight Approx. 350kg Approx. 450kg Approx. 780kg
Installation depth Approx. 1200mm Approx. 1300mm Approx. 1300mm
GIFAS solid rubber distributors 3800 series 7800 series 7800/7900 series
Can be equipped in accordance with the client's wishes (power, water, waste water, compressed air and EDP connections)
1 CEE built-in socket 5x16A/400V2 protective contact sockets
1 CEE built-in socket 5x63A /400V1 CEE built-in socket 5x32A/400V1 CEE built-in socket 5x16A/400V3 protective contact sockets
1 CEE built-in socket 5x63A/400V1 CEE built-in socket 5x32A/400V3 CEE built-in socket 5x16A/400V6 protective contact sockets
Fuses 1 RCCB 40/0.03A1 LP 16A / 3-pin2 LP 16A / 1-pin
1 LP 63A / 3-pin1 LP 32A / 3-pin1 LP 16A / 3-pin3 LP 16A / 1-pin1 LP 63A / 3-pin pre-fusing 1 RCCB 63/0.03A / 4-pin for 63A socket1 RCCB 63/0.03A/ 4-pin for the remaining sockets
1 LP 63A / 3-pin1 LP 32A / 3-pin3 LP 16A / 3-pin6 LP 16A / 1-pin1RCCB 63/0.03A for 63A built-in socket 1RCCB 63/0.03A for 16A built-in sockets1 RCCB 63/0.03A for 32A built-in socket and protective contact sockets
Product features
- Sturdy, easy to use and safe in operation - Can be walked or driven over even during operation - Integrates perfectly into its surroundings thanks to customisable
filling options - Secured against unauthorised opening (vandal-proof) and lockable
in the contacted area - Easy and quick opening and closing, supported by gas springs - Frost-proof operation thanks to cover heating - The GIFAS solid rubber distributor guarantees optimum operating
safety down to -40°C.
PIAZZA 540 PIAZZA 700 PIAZZA 1000
PIAZZA
- No formation of condensation thanks to the GIFAS solid rubber distributor - Resistant to environmental influences - Stainless steel construction, all metal parts made from V2A
with cathodic dip coating - Visible reflectors on the opened cover system - Distributor fastening on the underside of the cover - The connector distributor can be accessed when installed (E-check) - Pit cover, lock and distributor can be replaced
5Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
PIAZZA 540
Solid stainless steel construction (V2A) 540 x 540 mm, load capacity up to 400 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.
Technical additions
Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surroundings.Cable exit flap: (180x130 mm) integrated into the shaft cover frame.Locking: a self-cleaning lock with snap fastener closes the shaft cover. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery). Heating: the shaft cover contains a self- regulating heating strip which helps to ensure easy opening in the event of frost.
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Supplied packageStainless steel construction with - fillable shaft cover - solid rubber electrical distributor - junction box
Fully assembled and wired. Mounted on concrete ring (H = 470 mm, NW = 600 mm).
PIAZZA
6 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
PIAZZA 700
Solid stainless steel construction (V2A) 700 x 700 mm, load capacity up to 400 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.
Technical additions
Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (180x130 mm) integrated into the shaft cover frame. Locking: A sturdy closing mechanism (with snap lock) closes the shaft cover and it can also be secured with a shackle lock. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery).Heating: A self-regulating heating strip is integrated into the shaft cover in order to ensure easy opening in the event of frost.
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Supplied packageStainless steel construction with - fillable shaft cover - solid rubber electrical distributor - junction box
Fully assembled and wired. Mounted on concrete ring (H = 470 mm, NW = 800 mm).
PIAZZA
7Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
PIAZZA 1000
Solid stainless steel construction (V2A) 1000 x 1000 mm, load capacity up to 400 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.
Technical additions
Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (180x130 mm) integrated into the shaft cover frame. Locking: A sturdy closing mechanism (with snap lock) closes the shaft cover and it can also be secured with a shackle lock. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery).Heating: A self-regulating heating strip is integrated into the shaft cover in order to ensure easy opening in the event of frost.
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Supplied packageStainless steel construction with - fillable shaft cover - solid rubber electrical distributor - junction box
Fully assembled and wired. Mounted on concrete ring (H = 470 mm, NW = 1000 mm).
PIAZZA
8 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
Practical examples
Detmold marketplace, PIAZZA 1000
Lübeck town hall market, PIAZZA with payment system
PIAZZA
Lübeck town hall market, PIAZZA with payment system
Detmold marketplace, PIAZZA 1000
Detmold marketplace, PIAZZA 1000 Lübeck town hall market, PIAZZA with payment system
9Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
Wiesbaden Assembly Rooms, PIAZZA Wiesbaden Assembly Rooms, PIAZZA
Practical examples
PIAZZA
Thyssen, PIAZZA 700 Thyssen, PIAZZA 700
Hangar, PIAZZA 700 Hangar, PIAZZA 700
10 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
Dresden "Zwinger", PIAZZA 700 Dresden "Zwinger", PIAZZA 700
PIAZZA
Practical examples
Airport PIAZZA 2000 Airport PIAZZA 2000
Munich Residence, PIAZZA 700Munich Residence, PIAZZA 700
11Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
Installation instructions
Excavating the installation pit Customer-side concrete ring Insertion of the unit
Insertion of the entire unit into the prepared installation pit
Levelling Decanting and concreting-in
PIAZZA installation and assembly procedure
Adaptation to the surroundings with filler material
Fully installed PIAZZA
With underfloor systems involving fresh water, the terminal distributor must be hung on the side opposite the water tap!
12 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
CAMPETTO
Overview of CAMPETTO V / VI / VII / VIII
Technical data CAMPETTO V CAMPETTO VI CAMPETTO VII CAMPETTO VIII
Area of use Internal / external area Internal / external area Internal / external area Internal / external area
Maximum load Up to 30kN (3t), special designs 50kN
125kN (12.5t) Up to 30kN (3t)Special designs 50kN
125kN (12.5t)
Classification as per EN 124
15kN (1.5t) / A15 125kN (12.5t) / B125 15kN (1.5t) / A15 125kN (12.5t) / B125
Cover Stainless steel non-slip steel floor plate, can be supplied in two sizes 628x435mm / 778x535mm
Covers can be individually filled / paved can be supplied in two sizes 628x435mm / 778x535mm
Stainless steel non-slip steel floor plate 880x992mm
Covers can be individually filled / paved880x992mm
Weight Approx. 60kg Approx. 70kg Approx. 250kg Approx. 250kg
Installation depth Dependent on design 500 or 670mm
Dependent on design 500 or 670mm
1000mm 1000mm
GIFAS solid rubber distributors
Individual series 7200 to 7900
Individual series 7200 to 7900
Individual series 7200 to 7900
Individual series 7200 to 7900
Can be equipped in accordance with the client's wishes (power, water, waste water, compressed air and EDP connections)
1 CEE built-in socket 5x32A/400V1 CEE built-in socket 5x16A/400V3 protective contactsockets
1 CEE built-in socket 5x32A/400V1 CEE built-in socket 5x16A/400V3 protective contact sockets
1 CEE built-in socket 5x63A/400V1 CEE built-in socket 5x32A/400V3 CEE built-in socket 5x16A/400V6 protective contact sockets
1 CEE built-in socket 5x63A/400V1 CEE built-in socket 5x32A/400V3 CEE built-in socket 5x16A/400V6 protective contact sockets
Fuses 1 LP 32A / 3-pin1 LP 16A / 3-pin3 LP 16A / 1-pin1 LP 63A / 3-pin for pre-fusing1 RCCB 63/0.03 A / 4-pin for all sockets
1 LP 32A / 3-pin1 LP 16A / 3-pin3 LP 16A / 1-pin1 LP 63A / 3-pin for pre-fusing1 RCCB 63/0.03A / 4-pin for all sockets
1 LP 63A / 3-pin1 LP 32A / 3-pin3 LP 16A / 3-pin6 LP 16A / 1-pin 1 RCCB 63/0.03A for 63A built-in socket 1 RCCB 63/0.03A for 16A built-in socket 1 RCCB 63/0.03A for 32A built-in socket protective contact sockets
1 LP 63A / 3-pin1 LP 32A / 3-pin3 LP 16A / 3-pin6 LP 16A / 1-pin 1 RCCB 63/0.03A for 63A built-in socket 1 RCCB 63/0.03A for 16A built-in socket 1 RCCB 63/0.03A for 32A built-in socket protective contact sockets
Product features
- Sturdy, easy to use and safe in operation - Can be walked or driven over even during operation - Integrates perfectly into its surroundings thanks to customisable
filling options - Secured against unauthorised opening (vandal-proof) and lockable
in the contacted area - Easy and quick opening and closing, supported by gas springs - Frost-proof operation thanks to cover heating option - The GIFAS solid rubber distributor guarantees optimum operating
Safety down to -40°C.
- No formation of condensation thanks to the GIFAS solid rubber distributor - Resistant to environmental influences - Stainless steel construction, all metal parts made from V2A with
cathodic dip coating - Visible reflectors on the opened cover system - Cover pit can be removed by loosening the screws for maintenance
purposes - Distributor fastening on the underside of the cover - The connector distributor can be accessed when installed (E-check) - Pit cover, lock and distributor can be replaced
13Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
CAMPETTO
CAMPETTO V
Solid stainless steel construction (V2A) in two sizes, load capacity up to 30 kN (special design up to 50 kN), gas springs for fully automatic opening, shaft cover made from non-slip steel floor plate, distributor as per the client's request.
Technical additions
Cover: V2A non-slip steel floor plate Cable exit flap: (135x90 mm) in the centre on the head side of the cover.Locking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Supplied packageStainless steel construction with - cover made from V2A non-slip steel floor plate - solid rubber electrical distributor - junction box
Fully assembled and wired.
for distributors 7200 – 7400
for distributors 7700 – 7900
Pavement
Sand
Gravel
Concrete collar
Pavement
Sand
Gravel
Concrete collar
14 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
CAMPETTO VI
Solid stainless steel construction (V2A) in two sizes, load capacity up to 125 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.
Technical additions
Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (135x90 mm) in the centre on the head side of the cover.Locking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Supplied packageStainless steel construction with - fillable shaft cover - solid rubber electrical distributor - junction box
Fully assembled and wired.
for distributors 7200 – 7400
for distributors 7700 – 7900
CAMPETTO
Pavement
Sand
Gravel
Concrete collar
Pavement
Sand
Gravel
Concrete collar
15Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
CAMPETTO VII
Solid stainless steel construction (V2A), load capacity up to 15 kN (special design up to 50 kN), gas springs for fully automatic opening, shaft cover made from non-slip steel floor plate, distributor as per the client's request.
Technical additions
Cover: V2A non-slip steel floor plate Cable exit flap: (135x90 mm) in the centre on the head side of the coverLocking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Supplied packageStainless steel construction with - cover made from V2A non-slip steel floor plate - solid rubber electrical distributor - junction box
Fully assembled and wired.
for distributors 7200 – 7900
CAMPETTO
992
940
Bep�asterung
Betonmanschette
Sand
Kies
PavementSand
Gravel
Concrete collar
16 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
CAMPETTO
CAMPETTO VIII
Solid stainless steel construction (V2A), load capacity up to 125 kN, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request.
Technical additions
Cover filling: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings.Cable exit flap: (280x90 mm) in the centre on the head side of the cover.Locking: a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). Heating (optional): the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost.
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Supplied packageStainless steel construction with - fillable shaft cover - solid rubber electrical distributor - junction box
Fully assembled and wired.
for distributors 7200 – 7900
992
940
Bep�asterung
Betonmanschette
Sand
Kies
PavementSand
Gravel
Concrete collar
17Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
Practical examples
Bad Saarow station, CAMPETTO VIBad Saarow station, CAMPETTO VI
BUGA Koblenz, CAMPETTO with diving bell
CAMPETTO
BUGA Koblenz, CAMPETTO with diving bell
Melitta Minden, CAMPETTO VILondon Olympic Games, CAMPETTO
18 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
Practical examples
Meckenbeuren church square, CAMPETTO VI Meckenbeuren church square, CAMPETTO VI
Daimler presentation hall, CAMPETTO VIDaimler presentation hall, CAMPETTO VI
Hotel Grand Spa Resort Sylt, CAMPETTO VI
CAMPETTO
Hotel Grand Spa Resort Sylt, CAMPETTO VI
19Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
Practical examples
Hampton Court Palace, CAMPETTO VI BUGA Schwerin, CAMPETTO V
Town of Illertissen, CAMPETTO VI Pforzheim marketplace, CAMPETTO VI
CAMPETTO
Max Planck Institute, CAMPETTO VIII Hamburg CruiseCenter, CAMPETTO VIII
20 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
Installation instructions
Excavating the installation pit Topping up the installation pit Insertion of the unit
Filling Decanting and concreting-in Adaptation to the surroundings with filler material
Fully installed CAMPETTO
CAMPETTO installation and assembly procedure
21Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
PICCOLINO
PICCOLINO 120 / 200
Technical data PICCOLINO 120 PICCOLINO 200
Area of use Underfloor distributors for restricted spaces Underfloor distributors for restricted spaces
Classification as per EN 124 2kN (200kg) 250kN (25 t) / C250
Cover Stainless steel non-slip steel floor plate120x120mm
Stainless steel non-slip steel floor plate200x200mm
Weight Approx. 4.2kg Approx. 7.5kg
Installation depth Approx. 400mm Approx. 400mm
Equipment options 2m GIFAS-PROFLEXX-07 cable 3x2.5 m2
1 protective contact coupling 16A/230V (IP 68) or 1 CEE coupling 16A/400V (IP67)
2m GIFAS-PROFLEXX-07 cable 3x2.5 m2
1 protective contact coupling 16A/230V (IP 68) or 1 CEE coupling 5x16A/400V (IP 67) or 1 CEE coupling 5x32A/400V (IP 67)
PICCOLINO 120 PICCOLINO 200
Product features
- Solid stainless steel construction, rust-free - Completely maintenance-free (E-check) - Cover made from non-slip steel floor plate - Easy operation - Can be walked or driven over during operation - Ground-flush installation - Excellent operating safety thanks to reclosing after commissioning - Locking is performed using a countersunk, cover-flush dual bit lock (1
key included in the scope of delivery) - Cable exit opening in the cover lid for cables up to d = 15 mm
(PICCOLINO 120), d = 25 mm (PICCOLINO 200)
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
PICCOLINO 120 PICCOLINO 200
Twist protection
Potential Earthcross slot screw
2m GIFAS PROFLEXX 3x2,5(connection and shrinking need to be executed at contruction side)
cable exit
square sash fastener
Twist protection
Potential Earthcross slot screw
cable exit
square sash fastener
2m GIFAS PROFLEXX 3x2,5(connection and shrinking need to be executed at contruction side)
Potential EarthM8 bolt
Schuko-socketWD 230V 16A
holder socket
22 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY
RETRANT
RETRANT
Product features
- Solid stainless steel construction, rust-free - Completely maintenance-free (E-check) - Cover made from non-slip steel floor plate - Easy operation - Can be walked or driven over during operation - Ground-flush installation - Excellent safety thanks to the GIFAS double pressure method; the
cover is held securely closed even without a lock - Locking is performed using a countersunk, cover-flush dual bit lock (1
Technical data RETRANT
Area of use Underfloor distributors for restricted spaces
Classification as per EN 124 15kN (1.5t) / A15
Cover Stainless steel non-slip steel floor plate340x240mm
Weight Approx. 25kg
Installation depth Approx. 420mm
GIFAS solid rubber distributors Series 2516, protection category IP 65
Equipment optionsIndividual as per the client's wishes
1 CEE built-in socket 5x32A/400V in straight design1 protective contact socket 230V (IP 68)
key included in the scope of delivery) - Cable exit for cables is located in the shaft cover
It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water.
Cable input
Stainless steel cover
Lower part steel casing, coated against corrosion
Solid rubber casing type 2516Cable outlet 50 x 50 mm
23Telephone +49 2137 105-0 · Fax +49 2137 105-230 · [email protected] · www.gifas.de
RETRANT, Wiesbaden Assembly Rooms RETRANT, Wiesbaden Assembly Rooms
PICCOLINO 200
PICCOLINO / RETRANT
Practical examples
RETRANT, Wiesbaden Assembly Rooms
RETRANT, Lübeck town hall market RETRANT, Lübeck town hall market
GIFAS ELECTRIC GmbHBorsigstrasse 9, 41469 Neuss
PO Box 21 03 63, 41429 NeussGERMANY
Phone +49 2137 105-0Fax: +49 2137 105-230
CO
NTA
CT U
S T
OD
AY
Tech
nica
l mod
ifica
tions
rese
rved
02/
2013
New products and specialist solutions, along with the latest product catalogue, can be found on our website.
www.gifas.de