Catalogue Online Turbidity/refract/viscosity meters · IPR Process ‐ Refractometer 1.1. Process Refractometer IPR Compact2 1.2. Process Refractometer IPR Basic3 1.3. Process Refractometer

$Page 1: Catalogue Online Turbidity/refract/viscosity meters · IPR Process ‐ Refractometer 1.1. Process Refractometer IPR Compact2 1.2. Process Refractometer IPR Basic3 1.3. Process Refractometer$
1 www.milktronics.com 352-508-1296 [email protected]

Catalogue Online Turbidity/refract/viscosity meters

Index Page

Turbidity VOM 0-6000NTU 2

Turbidity VOD 0-1500NTU 3

Turbidity VOF 0-1500NTU 4

Turbidity Drain sewer meter 5

Turbidity Meter selection chart 6

Rotary PASVE pH 7

Refractometers 8

1. IPR Process ‐ Refractometer

1.1. Process Refractometer IPR Compact2

1.2. Process Refractometer IPR Basic3

1.3. Process Refractometer IPR FR2 (Full Range)

1.4. Process Refractometer IPR HR2 (High Resolution)

Viscosity meter 12

http://www.milktronics.com/


VOM Relative turbidity meters

Applications: phase separation, filter monitoring, Yeast, CIP, Food, waste water…

Product information and specs click here: Product informations and spces

Turbidity meter without display VOM

Range 0-6000NTU, ppm, % g/L….

High temperature process option available 302F

HART Protocol/USB port/ AISI316L/ duplex/ HAST/Titanium

Wavelength 880nm, 640nm

Price ≈ 2,500.00$ (Options: HT+500$, Kalrez +200$)

4-20mA output

Turbidity meter display VOM

Range 0-6000NTU, ppm, %, g/L….


HART Protocol/USB port / AISI316L/ duplex/ HAST/Titanium


Price≈ 3,000.00$ (options : HT+500$, Kalrez +200$)

4-20mA output for turbidity + 4-20mA output for temperature

Turbidity meter remote display VOM

Range 0-6000NTU, ppm, %, g/L….




Price ≈ 3,900.00$ ( options : HT+500$, Kalrez +200$)


Turbidity meter display and tri-clamp VOM

Range 0-6000NTU, ppm,%, g/L….


HART Protocol/ AISI316L/ duplex/ HAST/Titanium





http://milktronics.com/pdf/VOM_product_info_EN.pdf


VOD Turbidity/Absorption meters

Applications on low turbidity: RO, UF, COW Breach detection, water impurities,

COD, Calcium, Color, soft drink, protein, lactoferin, sugar filter…

Turbidity /absorption meter with display VOD

Range 0-5-10-100-150….1500NTU, ppm, %, g/L….



Wavelength NIR 880nm, Blue 460nm, UV 365nm

Price≈ 3,900.00$ (options : HT+500$, Kalrez +200$, UV+500$)


Varinline pipe : 1” 600.00$, 1,5” 750.00$, 2” 850.00$,

2,5” 950.00$, 3” 1,100.00$, 4” 1,400.00$

The pipe comes with tri-clamps and 2 blanking plates

Other process fittings available

Turbidity /absorption meter remote display VOD

Range 0-5-10-100-150….1500NTU, ppm, %, g/L….



Wavelength NIR 880nm, Blue 460nm, UV 365nm

Price ≈ 4,400.00$ (options : HT+500$, Kalrez +200$, UV+500$)


Varinline pipe : 1” 600.00$, 1,5” 750.00$, 2” 850.00$,

2,5” 950.00$, 3” 1,100.00$, 4” 1,400.00$

The pipe comes with tri-clamps and 2 blanking plates

Other process fittings available



VOF Turbidity/Absorption meters

Applications: phase transition, waste water, protein, color…

Procedure to retract the sensor during operation click here: retractable procedure

Turbidity /absorption meter display tri-clamp VOF

Range 0-5-10-100-150….1500NTU, ppm, %, g/L….



Wavelength NIR 880nm, Blue 460nm

Price≈ 4,500.00$ (options: HT+500$, Kalrez +200$)


All fittings available (varivant, tri-clamp flange, I-Line etc.)

Turbidity /absorption meter ball valve, no display VOF

Range 0-5-10-100-150….1500NTU, ppm, %, g/L….




Price≈ 4,400.00$ (options: HT+500$, Kalrez +200$)

4-20mA output for turbidity

Turbidity /absorption meter remote display ball valve VOF

Range 0-5-10-100-150….1500NTU, ppm, %, g/L….






Turbidity /absorption meter automatic cleaning

2bar air pressure is sprayed on the lens, the cleaning

Frequency can be set by the PLC or the sensor parameters.

Price: +600$


http://milktronics.com/pdf/retractable_B1_procedure.pdf


Turbidity meter to install in drains or sewers

Turbidity /absorption meter remote electronics VOF

Range 0-5-10-100-150….1500NTU, ppm, %, g/L….

Price ≈ 5,000.00$

Range: 0-6000NTU, ppm, %, g/L….

Price ≈ 4,000.00$

Cable stainless steel / remote electronics, 100% water proof





Pit system





PASVE pH service valve

pH probe rotary service valve datasheet

PASVE rotary pH service valve

AISI316L/ duplex/ HAST/Titanium

Price ≈ 2,200.00$ AISI316L manual operated

Price ≈ 4,000.00$ AISI316L automatic operated


http://milktronics.com/pdf/PASVE_pH_G345dle.pdf


Process Refractometer

iPR Compact2 ID‐N°

Price / unit

in US$

Automatically operating process refractometer to control, monitor and record

Dissolved solids. Stainless steel or anodized aluminum sensor, without display.PC

Software

General specifications:

Measuring range: 1.3320 ‐ 1.4209 RI

0 ‐ 50 Brix (with ATC)

Resolution 0.0001 RI / 0.05 Brix

Precision: ±0.0002 RI / ± 0,15 Brix at 20°C

ATC range Brix: 10 ‐ 50°C

Process temperature: ‐10 ... 80°C

Max. process pressure: up to 10 bar

Power supply: 24 V DC

Light source: 589 nm LED

Data output: 4‐20 mA

PC connection: RS232, RS422 or USB

Dimension: 150 mm x Ø 65 mm

Weight. 1000 g

Models:

iPR‐C2 S Stainless steel sensor 10310 5,880.00

iPR‐C2 Al Anodized aluminium sensor 10780 5,376.00

iPR‐C2 S Like IPR‐C2 S but with higher precision (±0.0001 RI / ±0.1 Brix) 14158 6,120.00

Connecting flanges (1 flanging type per sensor possible, please specify)

Joint Tuchenhagen VariVent 05510 264.00

connection APV 05520 312.00

Connection Tri‐Clamp 13279 312.00


http://schmidt-haensch.com/wp-content/uploads/2015/01/Uebersicht_Prozessrefr_D.jpg


IPR Basic3

ID‐N° Price / unit

in US$

Stainless steel sensor with integrated electronics without display

The configuration is done through a Windows based software program.

‐ Air cooling

‐ Single solution, visualization of the measuring data on the data logger

‐ Sensor connected to superior process control system

‐ PC Software

Specifications:

IPR Basic3 Resolution: 0.01 Brix / 0.00001 RI

Precision: ± 0.1 Brix / ± 0.00014 RI at 20°C

Measuring ranges: 1.32 ‐ 1.52 RI / 0 ‐ 90 Brix


Environment temperature: 0 °C ‐ 40 °C

Pressure load capacity: up to 10 bar (depending on process flange)

External power supply: 20 V ‐ 30 V DC (at 24 V and 0,11 A)

Output's: one serial interface RS 232, RS 485 or USB

two 4‐20 mA current outputs/ limit switches 1A

Models: Introduction

price

IPR Basic3 IPR‐Basic3‐VariVent 12609 8,508.00

IPR‐Basic3‐Tri‐Clamp 12612 8,640.00

IPR‐Basic3‐APV 12613 8,640.00



IPR FR2 ID‐N°

Price / unit

in US$

Stainless steel sensor with integrated electronics and display

The configuration is done through a Windows based software program. Joints for

water cooling jacket as standard.



‐ PC Software

Specifications:

IPR FR2 Measuring range: 1.3320 ‐ 1.5300 RI / 0 ‐ 100 Brix

Resolution : 0.01 Brix / 0.00001 RI

Precision: ± 0.05 Brix / ± 0.00007 RI at 20°C

Process temperature: ‐10 ... 150°C (with water cooling)






Models:

IPR FR2 IPR‐FR2‐VariVent 10970 11,040.00

IPR‐FR2‐Tri‐Clamp 10971 11,040.00

IPR‐FR2‐APV 10972 11,040.00

IPR HR2 (High Resolution) ID‐N° Price / unit

in US$

Stainless steel sensor with integrated electronics and display

The configuration is done through a Windows based software program. Joints for

water cooling jacket as standard.



‐ PC Software

Specifications:

Measuring range: 1.3320 ‐ 1.3720 / 0 ‐ 25 Brix

Resolution: 0.000005 RI / 0.002 Brix

Precision: ± 0.00004 RI / ± 0.02 Brix at 20°C

± 0.01 Brix (range up to 2% Brix)







Model:

IPR HR2 IPR‐HR2‐VariVent 10990 11,200.00

IPR‐HR2‐Tri‐Clamp 10991 11,600.00

IPR‐HR2‐APV 10992 11,600.00

Hydramotion Online Viscosity meter



XL7 process viscometer data for hygienic processes

The XL7 transducer can be supplied in a range of sizes with virtually any process fitting. The XL7-100 model

with a flanged connection is shown below as an example.



XL7 viscometer

Range 0 to 1,000,000,000 cP

Accuracy ±1% of reading

Repeatability ±0.3% of reading

Temperature

standard: –40 to +150 °C HT2 high temp: up to 400 °C

Pressure to process connection

Process

connection to suit application

Safety certification

All instruments also available as intrinsically safe IEC Ex ia versions

Overall length 443 mm (standard)

Materials

all 316 stainless steel

(standard); other materials on request

Construction all-welded crevice-free

wetted parts

Finish standard: high polish optional: electropolish; PTFE coated

Environmental rating

IP68

VP550 signal processor

Power supply 24V DC @ 150 mA (including transducer)

Inputs (optional)

• temperature (PRT or 4-20mA analogue) • density (4-20mA analogue) • pressure (4-20mA analogue)

Outputs

3 x 4 - 20 mA analogue,

fully configurable, representing either viscosity or referenced viscosity • RS485 ModBus serial link

Environmental

rating IP65

Safety certification

Safe Area

Features

• Viscosity correction to standard conditions

• 2-off volt-free contact outputs

Options USB output

INTRINSIC SAFETY

HYGIENIC

HIGH TEMPERATURE

INSTALLATION


http://www.hydramotion.com/XL7_is_3v3.html

http://www.hydramotion.com/XL7_hygienic.html

http://www.hydramotion.com/XL7_ht.html

http://www.hydramotion.com/XL7_installation.html

http://www.hydramotion.com/XL7_is_3v3.html

http://www.hydramotion.com/XL7_hygienic.html

http://www.hydramotion.com/XL7_ht.html

http://www.hydramotion.com/XL7_installation.html


Contacts: Andrea Dehec President Andrea.dehec@milktronics .com Cell: 352-602-6404 Office: 352-508-1296 Sylvain Dehec Technical Director [email protected] Cell: 678-619-9268 Office : 352-508-1296 Website: www.milktronics.com


mailto:Andrea.dehec@milktronics

mailto:[email protected]

Documents

Catalogue Online Turbidity/refract/viscosity meters · IPR Process ‐ Refractometer 1.1. Process Refractometer IPR Compact2 1.2. Process Refractometer IPR Basic3 1.3. Process Refractometer