206
With Best Compliments from S.K. KATARIA & SONS (An ISO 9001-2008 Company) Publishers of Engineering & Computer Books New Delhi and Ludhiana (INDIA) visit us at: www.skkatariaandsons.com Bestsellers, Latest Editions & New Releases Make you Technically, Academically Strong OUTSTANDING BOOKS OF OUR PUBLICATION PUBLISHERS S. K. KATARIA & SONS ® (An ISO 9001-2008 Company) 4885/109, Prakash Mahal, Dr. Subhash Bhargav Lane, Opposite Delhi Medical Association, Daryaganj, New Delhi - 110002 Phones: +91-11-23243489, 23269324 • Telefax: +91-11-23243489 H.O.: Opp. Clock Tower, Ludhiana (PB.) • Phone: 0161-2726401 E-mail: [email protected][email protected] Website: www.skkatariaandsons.com Mechanical, Production Engineering Industrial Engineering & Management Energy Technology Electrical Electronics & Instrumentation Communications Computer Science, Information Technology Civil Ecology Environmental Science Safety Engineering Chemistry Chemical Metallurgy Engineering/Applied Mathematics π ø ß £ ¥ μ #

CATALOGUE_2013.pdf

Embed Size (px)

DESCRIPTION

Catalog of Engineering books

Citation preview

With Best Compliments from

S.K. KATARIA & SONS(An ISO 9001-2008 Company)Publishers of Engineering & Computer BooksNew Delhi and Ludhiana (INDIA)

visit us at: www.skkatariaandsons.com

Bestsellers, Latest Editions & New Releases

Make youTechnically, Academically

Strong

OUTSTANDING BOOKS OF OUR PUBLICATION

PUBLISHERS

S. K. KATARIA & SONS®

(An ISO 9001-2008 Company)

4885/109, Prakash Mahal, Dr. Subhash Bhargav Lane, Opposite Delhi Medical Association, Daryaganj, New Delhi -110002

Phones: +91-11-23243489, 23269324 • Telefax: +91-11-23243489H.O.: Opp. Clock Tower, Ludhiana (PB.) • Phone: 0161-2726401E-mail: [email protected][email protected]

Website: www.skkatariaandsons.com

• Mechanical, Production Engineering• Industrial Engineering & Management• Energy Technology• Electrical• Electronics & Instrumentation• Communications• Computer Science,

Information Technology• Civil• Ecology Environmental Science• Safety Engineering• Chemistry• Chemical• Metallurgy• Engineering/Applied Mathematics

π∑

øߣ≥≤¥

μ#

ABOUT OUR AUTHORS

Each one of our authors have an excellent academic background and are high achievers having various degrees and medals. The profound knowledge and years of experience of our authors clearly refl ect in their books. Our authors are scattered all over India and have always been a part of various Inter-collegiate seminars, councils and interactions in National and international levels. They are the assets of our Publication and the learning community. An increasing number of Authors with proven qualities and records are joining our publication and thereby enhancing our publication. Our sincere thanks to the existing authors and a very warm welcome to the newcomers.

To The Book Distributors, Librarians and Department StaffWe would like to bring to your notice that we follow a policy of selling our books mainly through the Book Distributors scattered in all States and Union Territories of India. Their list is included in the pages 158 to 167 of our catalogue. Therefore the Librarians and Departments can get their supply from them. In case of any diffi culty in getting our books from the distributors, please ask the Librarians and Department teachers to send their order directly to us. We shall send your books either to the distributor or directly to you as per your request.

With Esteemed & RegardsS.K. Kataria & Sons

Complimentary CopiesComplimentary Copies of the books in this catalogue are available to the teachers who wish to consider the books for possible course adoption on formal request.

To request a complimentary copy, write to our Delhi offi ce only. Please include your position, the course title and approximate enrollment, text currently in use. Please note that the complimentary copies will not be sent without this information. It is also necessary to send the syllabus of your university for the course you are requesting a specimen copy.

PricesAll Prices are subject to change without notice. Prices are established in India and in Indian Rupees.

ABOUT THE PUBLISHER

M/s S.K. Kataria & Sons is a well renowned name amongst the publishers of Engineering and Computer Books both in India and Abroad.The Publication started in 1989, and the ever increasing number of readers and customers from all over the world have helped the publication in achieving a successful profi le. The main aim of our publication is to impact versatile knowledge to the students and readers that lead them to the crystal clear world of wisdom and knowledge. Our books provide wings to student to fl utter in all tough fi elds of competition and reach the zenith of success and fame. Our success entirely depends on:

• Selection of authors having profound knowledge and experience in their area of work.• Examination oriented package programs for the students and teachers. • Affordable prices of our books. • Use of easy and simple language in our books. • Solved problems and questionnaire added for the benefi t of the students.• Usage of quality printing and illustrative diagrams.

With the above features and many more, we enrich the strength of readers including both students and teachers.We look forward to your co-operation and support, and as we are completely devoted to the selfl ess service to the learning community.

HEARTY WELCOME TO NEW AUTHORS

M/s S.K. Kataria & Sons, the publishers of Engineering and Computer Books, are like heaven for all enterprising and enthusiastic authors. We would like to welcome qualifi ed and specialized authors to work in the fi elds of:

• Mechanical, Mechatronics, Production and Chemical.• Civil, Applied Mechanics and Environmental Studies.• Electrical, Electronics and Instrumentation.• Neural Networks, Artifi cial Intelligence and Fuzzy Fields.• Bio Technology, Nano Technology and Bio Informatics.• Hardware, Software and Networking.• Mathematics, Physics, Chemistry and English.

If you are specialized in any of the above areas and intend to write books for our publication please e-mail your proposal to the following e-mail address.

[email protected][email protected]

We shall contact you and introduce you to our professional team. We shall humbly wait for your proposal and manuscript.Other terms and conditions also apply as per the rules and regulations of the fi rm.

To Contact us:

Address: M/s. S. K. Kataria & Sons4885/109, Prakash Mahal, Dr. Subhash Bhargav Lane, opp. Delhi Medical Association, Daryaganj, New Delhi - 110002Phones: +91-11-23243489, 23269324 • Telefax: +91-11-23243489H.O.: Opp. Clock Tower, Ludhiana (PB.) • Phone: 0161-2726401E-mail: [email protected][email protected]: www.skkatariaandsons.com

KATSON EDUCATIONAL SERIES

(An ISO 9001-2008 Company)Publishers of Engineering & Computer Books

4885/109, Prakash Mahal, Dr. Subhash Bhargav Lane,Opposite Delhi Medical Association, Daryaganj, New Delhi - 110002

Phones: +91-11-23243489, 23269324 • Telefax: +91-11-23243489H.O.: Opp. Clock Tower, Ludhiana (Pb.) • Phones: 0161-2726401

E-mail: [email protected][email protected]: www.skkatariaandsons.com

S. K. KATARIA & SONS®

Topic Pages

Electronics Engineering 1-53

Electrical Engineering 54-72

Mechanical Engineering 73-105

Computers 106-149

Civil Engineering 150-164

Applied Science 165-179

A.M.I.E. Books 180

Objective Type Books 181-184

CONTENTS

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS

Size : 20 x 30/8Pages : 1600 Approx.ISBN : 81-88458-93-7

Price Rs. : 565/-Reprint : 2012

A COURSE INELECTRONICS AND

ELECTRICALMEASUREMENTS ANDINSTRUMENTATION

Size : 23 x 36/8Pages : 1025 Approx.ISBN : 978-93-5014-314-8

81-85749-75-2Price Rs. : 475/-Reprint : 2013

ELECTRONICDEVICES

andCIRCUITS

By: J.B. Gupta

By: J.B. Gupta

CONTENTS :• Introductory Concepts• Electron Dynamics• Electron Emission• Semiconductor Physics• Junction Diodes

CONTENTS :• Measurements and Measurement Systems• Characteristics of Instruments and

Measurement Systems

• Errors in Measurement• Units and Dimensions• Standards of Measurement• Electrical Circuit Components

(Resistors, Inductors,Capacitors) and Their Residues

• Instruments and Accessories• Galvanometers• Analog-Ammeters and Voltmeters• Extension of Instrument Range• Measurement of Power and Wattmeters• Measurement of Energy and Energy Meters• Miscellaneous Indicating Instruments• Measurement of Resistance• Potentiometers• Measurement of Inductance and Capacitance• Localization of Cable Faults• Magnetic Measurements• High Voltage Measurements• Optoelectronic Measurements• Electronic Instruments and High Frequency

Measurements• Cathode Ray Oscilloscope• Signal Generators

• Signal Analyzers• Instrumentation Amplifiers• Signal Conditioning• Electrical Wave Filters• Number Systems and Codes• Logic Gates, Boolean Algebra and

Logic Families• Digital Measurement and Instruments• Display Devices• Electronic Recording Devices• Transducers• Measurement of Non-electrical Quantities• Data Acquisition System• Telemetry• Microprocessor-Based Measurements• Objective Type Questions• Index

• Zeners And Other Two-Terminal Devices• Rectifiers• Bipolar Junction Transistors (BJTs)• Hybrid Parameters• Transistor Biasing And Stabilization• Single Stage Transistor Amplifiers• Field-Effect Transistors• Amplifier Frequency Response• Multistage Amplifiers• Large Signals or Power Amplifiers-I:

Single Ended• Large Signals or Power Amplifiers-II:

Push-Pull• Feedback Amplifiers• Tuned Amplifiers• Differential Amplifiers• Sinusoidal Oscillators• Modulation And Demodulation• Optoelectronic Devices• Power Semiconductor Devices• Pulse Signals• Linear Waveshaping• Nonlinear Waveshaping

• Switching Circuits (Multivibrators)• Integrated Circuits• Operational Amplifiers• General Applications of OP-AMPs• IC Waveform Generators• Nonlinear Circuits• The 555 IC Timer• Active Filters• Phase-Locked Loops (PLL)• Regulated And Switching Power Suppliers• Number Systems And Codes• Logic Gates And Boolean Algebra• Logic Circuits• Digital Logic Families• Digital-To-Analog And Analog-To-

Digital Converters• Microcomputers And Microprocessors• Electronic (Analog As Well As Digital)

Instruments• Cathode Ray Oscilloscope• Transducers• Objective Type Questions• Appendices • Index

Size : 20 x 30/8Pages : 620 Approx.ISBN : 978-93-5014-159-5

81-88458-60-0Price Rs. : 325/-Reprint : 2013

By: J.B. Gupta

BASICELECTRICAL andELECTRONICSENGINEERING

CONTENTS :Part-I: Electrical Engineering• Direct Current (DC) Circuits• Alternating (Sinusoidal) Voltage and Current• Single Phase AC Circuits• Phasor Algebra And AC Circuits• Resonance in R-L-C Circuits• Three Phase Systems• Magnetic Circuits• Single Phase Transformer• DC Machines (Generators and Motors)• Three Phase Induction Motors• Synchronous Machines

(Generators and Motors)

CONTENTS :Unit-I: Electronic Components• Passive Components• Basic Semiconductor and P-N Junction Theory• Junction Diodes• Special Purpose Diodes• Bipolar Junction Transistors (BJTs)Unit-II: Basic Electronic Circuits• Rectifiers• Electrical Wave Filters• BJT AmplifiersUnit-III: Measuring Instruments• Cathode Ray Oscilloscope• Electronic Meters

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-81-906919-4-9

Price Rs. : 275/-Reprint : 2012

BASICELECTRONICS

By: J.B. Gupta

Unit-IV: Digital Electronics• Number Systems and Codes• Logic Gates and Boolean Algebra• Logic CircuitsUnit-V: Integrated Circuits• Integrated Circuits• Operational Amplifiers• The 555 IC Timer• Experiments• Objective Type Questions• Model Test Papers• Previous Year’s Examination Papers• Appendix• Index

Part-II: Electronics Engineering• Transducers• P-N Junction Diode• Bipolar Junction Transistor (BJT)• Field-Effect Transistors (FETs)• DC Power Supplies• Number Systems• Logic Circuits• Experiments• Model Test Papers• Index

1

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS2

Size : 20 x 30/8Pages : 410 Approx.ISBN : 81-89757-32-6

Price Rs. : 275/-Reprint : 2011

By: J.B. Gupta

ELECTRONICDEVICES AND

CIRCUITS

CONTENTS :Unit-I: Diode Circuits• Basic Semiconductor and P-N Junction

Theory• P-N Junction Diodes• Special Purpose Diodes• Diode Application-DC Power Supplies

Unit-II: Bipolar Junction Transistors• Bipolar Junction Transistors (BJTs)• Hybrid Parameters

Unit-III: Field Effect Transistors• Field Effect Transistors

Unit-IV: Transistors Biasing andStabilization• Transistor Biasing and Stabilization

Unit-V: Small Signal Low-FrequencyTransistors• Small Signal Low-Frequency Transistor

Amplifiers• Amplifier Frequency Response• Appendix• Model Test Papers• Examination Papers (Solved)• Index

For PTU

CONTENTS :Unit-I: Differential and CascodeAmplifiers• Differential and Cascode AmplifiersUnit-II: Introduction to OperationalAmplifiers• Introduction to Operational AmplifiersUnit-III: Negative Feedback in Op-Amps• Frequency Response of an Op-AmpUnit-IV: Frequency Response of anOp-Amp• Frequency Response of an Op-AmpUnit-V: Applications of Op-Amps

Size : 20 x 30/8Pages : 400 Approx.ISBN : 81-88458-89-9

Price Rs. : 250/-Reprint : 2011

LINEARINTEGRATED

CIRCUITS

By: J.B. Gupta

• General Applications of Op-Amps• Active Filters• Oscillators (Sinusoidal as well as

Non-sinusoidal)• Comparators and ConvertersUnit-VI: Specialised IC Applications• The 555 IC Timer• Phase-Locked Loops (PLL)• Voltage Regulators• Appendices• University Question Papers• Index

By: J.B. Gupta

CONTENTS :• Review of Electronic Circuit Theory• Pulse Signals• Linear Waveshaping• Wideband Amplifiers• Switching Characteristics of Devices• Non-linear Waveshaping• Multivibrators• Negative Resistance Devices• Operational Amplifiers (Op-Amps)• Sinusoidal and Non-sinusoidal Waveform

Generators

Size : 20 x 30/8Pages : 450 Approx.ISBN : 81-88458-87-2

Price Rs. : 250/-Reprint : 2012

PULSE ANDDIGITAL

SWITCHINGCIRCUITS

• The 555 IC Timer• Logic Gates• Examination Papers (Solved)• Index

CONTENTS :Review in Brief: Electronic CircuitTheory, Pulse Signals, Op-Amps andFlip-Flop• Electronic Circuit Theory• Pulse Signals• Operational Amplifiers (OP-AMPS)• Flip-FlopsUnit-I: Introduction to Basic Elements and Waveforms• Introduction to Basic Elements and

WaveformsUnit-II: Bistable Multivibrators• Bistable Multivibrators

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-391-9

Price Rs. : 240/-First Edition : 2013

PULSEWAVESHAPING

andSWITCHING

By: J.B. Gupta

Unit-III: Monostable and AstableMultivibrators• Monostable and Astable MultivibratorsUnit-IV: Switching Characteristics ofDevices• Switching Characteristics of DevicesUnit-V: Linear Waveshaping• Linear WaveshapingUnit-VI: Nonlinear Waveshaping• Nonlinear Waveshaping• Appendics• Model Test Paper• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 3

CONTENTS :Section-A: Oscilloscope• Cathode Ray OscilloscopeSection-B: Electronic Instruments• Electronic InstrumentsSection-C: Generation and Analysis ofWaveforms and Frequency and timeMeasurement• Waveform Generators• Operational Amplifiers and Applications• Waveform Analyzer• Digital Circuits• Digital Meters

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-81-89757-72-4

Price Rs. : 275/-Third Edition : 2011

ELECTRONICMEASUREMENT &

INSTRUMENTATION

By: J.B. Gupta

Section-D: Transducers and SignalConditioning• Transducers• Measurement of Non-Electrical

Quantities• Introduction to Signal Conditioning• Display Devices• Miscellaneous Topics• Model Test Papers• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 81-89757-03-2

Price Rs. : 195/-Reprint : 2009

Size : 20 x 30/8Pages : 525 Approx.ISBN : 978-93-5014-198-4

81-88458-64-3

Price Rs. : 295/-Eighth Edition : 2012

A Textbook ofELECTRONICSENGINEERING

By: J.B. Gupta

CONTENTS :Unit-I: Crystal Properties and ChargeCarriers in Semiconductors• Semiconductor Materials and Crystal

Properties• Energy Bands and Charge Carriers in

SemiconductorsUnit-II: Excess Carriers inSemiconductors• Excess Carriers in SemiconductorsUnit-III: Junction Properties• Junction Properties• Junction Properties (Continued)

Unit-IV: Transistors and OptoelectronicDevices• Bipolar Junction Transistors (BJTs)• Field-Effect Transistors• Photonic DevicesUnit-V: Negative ConductanceMicrowave Devices and Power Devices• Negative Conductance Microwave

Devices• Power Devices• Model Test Papers• Examination Papers• Index

SEMICONDUCTORMATERIALS

ANDDEVICES

By: J.B. Gupta

CONTENTS :Unit-I: Semiconductor Diodes andApplications• Basic Semiconductor and

P-N Junction Theory• Semiconductor Diodes• Diode Applications• Breakdown DiodesUnit-II: Bipolar Junction Transistor (BJT)• Bipolar Junction Transistors (BJTs)• Transistor Biasing• Small Signal Low Frequency

Transistor Amplifier

Unit-III: Field-Effect Transistor (FET) andOperational Amplifier (Op -Amp)• Field-Effect Transistors (FETs)• Operational Amplifiers (Op-Amps)Unit-IV: Switching Theory and LogicDesign (STLD)• Number Systems• Logic Gates and Boolean AlgebraUnit-V: Electronic Instruments• Electronic Instruments• Appendix• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 466 Approx.ISBN : 978-93-5014-387-2

Price Rs. : 275/-Seventh Edition : 2013

By: J.B. Gupta

ELECTRONICSMEASUREMENTS

ANDINSTRUMENTATION

CONTENTS :Unit-I: Fundamentals• Theory of Measurement• Units and Standards of Measurements• Errors in Measurements and Their

AnalysisUnit-II: Electronic Meters• Electronic Analog Voltmeters• Digital Voltmeters• Cathode Ray Oscilloscopes (CROs)Unit-III: Measuring Instruments• Electrical Measuring Instruments• Measurement of Resistance,

Inductance and Capacitance

Unit- IV: Instrumentation ForGeneration And Analysis of Waveforms• Signal Generators• Waveform AnalyzersUnit-V: Storage and Display Devices• Recorders• Display DevicesUnit-VI: Transducers and DataAcquisition Systems• Transducers• Data Acquisition SystemsUnit-VII: Telemetry• Telemetry• Model Test Papers • Index

For PTU

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS4

Size : 20 x 30/8Pages : 350 Approx.ISBN : 81-89757-30-X

Price Rs. : 235/-Reprint : 2011

ELECTRONICINSTRUMENTATION& MEASUREMENTS

By: J.B. Gupta

CONTENTS :Unit-1: Units, Dimensions, and Standards,Measurement Errors and PMMCInstruments• Units, Dimensions and Standards• Measurement Errors• PMMC InstrumentsUnit-II: Analog Electronic Meters and DigitalMeters• Analog Electronic Meters• Digital MetersUnit-III: Resistance Measurements andInductance and Capacitance Measurements• Resistance Measurements

• Inductance and Capacitance MeasurementsUnit-IV: Cathode Ray Oscilloscopes• Cathode Ray Oscilloscopes• Special OscilloscopesUnit-V: Instrument Calibration andRecorders• Instrument Calibration and Recorders• Model Test Papers• Examination Question Paper• Index

CONTENTS :Unit-I: Crystal Structure of Materials• Crystal Structure of MaterialsUnit-II: Conductivity of Metals• Conductivity of MetalsUnit-III: Mechanism of Conduction inSemiconductor Materials• Semiconductors• Bipolar Junction and Field Effect

TransistorsUnit-IV: Magnetic Properties of Materialsand Electrical Engineering Materials• Magnetic Properties of Materials

Size : 20 x 30/8Pages : 350 Approx.ISBN : 81-89757-13-X

Price Rs. : 220/-Reprint : 2013

ELECTRICAL ANDELECTRONICSENGINEERING

MATERIALS

By: J.B. Gupta

Unit-V: Dielectric Properties ofMaterials• Dielectric Properties of Materials• Model Test Papers• Examination Papers• Index

(For UPTU)

By: J.B. Gupta

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-80027-74-6

Price Rs. : 225/-Reprint : 2012

FUNDAMENTALS OFELECTRONIC

DEVICES

CONTENTS :Unit-I: Crystal Properties and ChargeCarriers in Semiconductors• Semiconductor Materials and Crystal

Properties• Energy Bands and Charge Carriers in

SemiconductorsUnit-II: Excess Carriers inSemiconductors• Excess Carriers in SemiconductorsUnit-III : Junction Properties• Junction Properties• Junction Properties (Continued)

Unit-IV: Transistors• Bipolar Junction Transistors (BJTs)• Field-Effect TransistorsUnit-V: Some Special Devices• Photonic Devices• Negative Conductance Microwave

Devices• Power Devices• Appendices• Model Test Papers• University Examination Paper• Index

CONTENTS :Unit-I: IC Op-Amp Applications• Differential Amplifiers• Operational Amplifiers and their

Parameters• Op-Amps with Negative Feedback• Linear Applications of Op-AmpsUnit-II: Waveform Generators• Waveform Generators• Digitally Controlled Frequency

SynthesizersUnit-III: Active Filters• Active Filters

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-81-89757-75-5

Price Rs. : 225/-Reprint : 2009

ANALOGINTEGRATED

CIRCUITS

By: J.B. Gupta

Unit-IV: Non-Linear Circuits• Non-Linear Circuits• Operational Transconductor Amplifier

(OTA)Unit-V: Voltage Regulators• Voltage Regulators• Appendices• Technical University Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 5

CONTENTS :

Unit-I: Electronic Instruments• Electronic Instruments and High

Frequency Measurements• Cathode Ray Oscilloscopes• Digital Measurement and Measuring

InstrumentsUnit-II: Instruments for Generationand Analysis of Waveforms• Instruments for Generation and Analysis

of WaveformsUnit-III: Instrument Transformers• Instrument Transformers

Unit-IV: Transducers• Transducers• Measurement of Non-Electrical QuantitiesUnit-V: Data Acquisition System• Data Acquisition Systems• Instrumentation Interface

Bus : IEEE-488• RecordersUnit-VI : Display Devices• Display DevicesUnit-VII: Telemetry• Telemetry• Previous Years Solved Examination

Papers• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 81-88458-66-X

Price Rs. : 275/-Reprint : 2011

ELECTRONICMEASUREMENTS &

INSTRUMENTATION

By: J.B. Gupta

(For PTU)

Section-D: Linear and NonlinearApplications of Operational Amplifiers• Linear Applications of Operational

Amplifiers• Nonlinear Applications of Operational

Amplifiers• IC Waveform Generators• Digital-to-Analog and Analog-to-

Digital Converters• Appendices• Model Test Papers• Previous Years Examination Papers• Index

ANALOGELECTRONIC

CIRCUITS

By: J.B. Gupta

CONTENTS :Section-A: Single and MultistageAmplifiers and Feedback Amplifiers• Single Stage Transistor Amplifiers• Multistage Amplifiers• Feedback AmplifiersSection-B: Oscillators• Sinusoidal OscillatorsSection-C: Power Amplifiers andOperational Amplifiers• Power Amplifiers• Operational Amplifiers (OP-AMPS)

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-80027-68-5

Price Rs. : 260/-Reprint : 2012

Size : 20 x 30/8Pages : 450 Approx.ISBN : 81-89757-61-X

Price Rs. : 275/-Reprint : 2013

FUNDAMENTALS OFANALOG

ELECTRONICS(For MDU)

By: J.B. Gupta

CONTENTS :Section-A: Semiconductor Diode• Semiconductor Diode• Diode CircuitsSection-B: MOSFETs• MOSFETs (Metal-Oxide Semiconductor

Field-Effect Transistors)• MOSFETs (Continued)Section-C: BJTs• BJTs (Bipolar Junction Transistors)• BJTs (Continued)

Section-D: Operational Amplifier:Feedback and Differential Amplifier• Operational Amplifier• Feedback• Differential Amplifier• Model Test Papers• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 81-85749-34-5

Price Rs. : 285/-Reprint : 2012

ELECTROMECHANICALENERGY

CONVERSION

By: J.B. Gupta

CONTENTS :Section-A: Magnetic Circuits andInduction• Magnetic Circuits and InductionSection-B: DC Machines• DC Generators• DC MotorsSection-C: Synchronous Machines• Synchronous Generators• Synchronous Motors

Section-D: Three Phase Transformersand Induction Machines• Transformers• 3-Phase Induction Machines• Single Phase Motors• Model Test Papers• University Examination Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS6

ELECTRICALAND

ELECTRONICSENGINEERING

By: J.B. Gupta

CONTENTS :Introductory• Introductory ConceptsUnit-I: DC Networks• DC NetworksUnit-II: AC Circuits• AC Fundamentals• Single Phase Series Circuits• Complex Notations and Circuit Analysis• Single Phase Parallel and Series-Parallel

Circuits• Resonance in R-L-C Circuits• Three-Phase AC CircuitsUnit-III: Transformers and Electrical DCMachines

• Electromagnetic Induction• Transformers• DC MachinesUnit-IV: Transistors and Thyristors• Transistors (Bipolar Junction Transistors)• ThyristorsUnit-V: Communication Systems• Modulation, Demodulation and

Television• Communication Channels• Examination Papers (Solved)• Index

CONTENTS :PreliminariesSmall Signal Low Frequency TransistorAmplifiersUnit-1: Feedback Amplifiers• Feedback AmplifiersUnit-II: Oscillators• Sinusoidal Oscillators• MultivibratorsUnit-III: High Frequency Amplifiers• High Frequency Amplifiers

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-018-5

Price Rs. : 225/-First Edition : 2010

A TEXTBOOK OFANALOG

ELECTRONICS

By: J.B. Gupta

Unit-IV: Tuned Amplifiers• Turned AmplifiersUnit-V: Power Amplifiers• Power AmplifiersUnit-VI: Digital Logic GateCharacteristics• Digital Logic Gate Characteristics• Previous Year Examination Papers

(Solved)• Index

(For RTU)

BASICELECTRONICS

By: J.B. Gupta

Size : 20 x 30/8Pages : 470 Approx.ISBN : 978-93-80027-64-7

Price Rs. : 275/-Reprint : 2012

(Two Colour Edition)

CONTENTS :Section-A: Semiconductor Physics andAmplifiers• Semiconductor Physics• Junction Diodes• Bipolar Junction Transistors (BJTs)• Transistor AmplifiersSection-B: Oscillators, OperationalAmplifiers and Power Supplies• Oscillators• Operational Amplifiers (Op-Amps)• Power Supplies

Section-C: Digital Electronics andElectronic and Electronic Instruments• Digital Electronics• Electronic InstrumentsSection-D: Displays• Displays• Experiments• Model Test Papers• Appendices• Examination Paper• Index

By: J.B. Gupta

CONTENTS :Introductory Concepts• Introductory ConceptsUnit-I: Electrical Circuit Analysis• Electrical Circuit Analysis• Alternating (Sinusoidal) Voltage and

Current• Single Phase AC Circuits• Phasor Algebra and AC Circuits• Three Phase AC CircuitsUnit-II: Transformers• Magnetic Circuits• TransformersUnit-III: Rotating Electric Machines• DC Machines (Generators and Motors)• Three Phase Rotating Machines

Size : 20 x 30/8Pages : 525 Approx.ISBN : 978-93-5014-086-4

Price Rs. : 275/-Reprint : 2012

A TEXTBOOK OFBASIC

ELECTRICAL ANDELECTRONICSENGINEERING

(Synchronous and Induction Machines)Unit-IV: Digital Electronics• Number Systems• Logic Gates and Boolean Algebra• Logic CircuitsUnit-V: Electronic Componentsand Circuits• Semiconductors and

P-N Junction Theory• Junction Diodes• Bipolar Junction Transistors (BJTs)• Laboratory Practicals• Model Test Papers• Examination Paper• Index

Size : 20 x 30/8Pages : 560 Approx.ISBN : 81-89757-79-2

Price Rs. : 265/-Reprint : 2012

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 7

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-050-5

Price Rs. : 250/-Reprint : 2012

A TEXTBOOK OFELECTRONICDEVICES AND

CIRCUITS

By: J.B. Gupta

CONTENTS :Section-A: Conducting Materials• Conducting MaterialsSection-B: Semiconductors,Construction and Characteristics ofDevices• Semiconductors• Construction and Characteristics of

DevicesSection-C: Transistors• Bipolar Junction Transistors (BJTs)• Field-Effect Transistors

Section-D: Some Special Devices• Photonic Devices• Negative Conductance Microwave

Devices• Power Devices• Appendices• Model Test Papers• Index

CONTENTS :Unit-I: Semiconductor Diodes and Rectifiers• Basic Semiconductor and P-N Junction

Theory• Semiconductor Diodes• Zener and Other Two-Terminal Devices• Diode ApplicationsUnit-II: Bipolar Junction Transistor (BJT) andBias Stabilization• Bipolar Junction Transistor (BJT)• Bias StabilizationUnit-III: Small Signal Amplifiers and FieldEffect Transistors• Small Signal AmplifiersBy: J.B. Gupta

Size : 20 x 30/8Pages : 460 Approx.ISBN : 978-93-5014-049-9

Price Rs. : 265/-Reprint : 2012

ELEMENTS OFANALOG

ELECTRONICS

• Field Effect TransistorsUnit-IV: Operational Amplifiers• Operational Amplifiers• Linear Applications of Op-Amps• Non-Linear Applications of Op-Amps• Op-Amp Filters• Appendices• Examination Papers• Index

(GGSIPU)

CONTENTS :Unit-I: Preliminaries• Introductory Concepts• Circuit Analysis• Electron Dynamics• Electron Emission• Electron Tubes

Size : 23 x 36/8Pages : 1375 Approx.ISBN : 978-81-907386-9-9

Price Rs. : 525/-Second Edition : 2011

AN INTEGRATEDCOURSE IN

ELECTRONICSENGINEERING

By: J.B. GuptaUnit-II: Semiconductory Physics andDiodes• Semiconductor Physics• Junction Diodes• Zeners and other Two-Terminal

Devices• Rectifiers

Unit-III: Transistors• Bipolar Junction Transistors (BJTs)• Field Effect Transistors• Hybrid Parameters• Transistor Biasing and StabilizationUnit-IV: Amplifiers and Oscillators• Single Stage Transistor Amplifiers• Amplifier Frequency Response• High-Frequency Transistor• Multistage Amplifiers• Large Signal or Power Amplifiers• Feedback in Amplifiers• Tuned Amplifiers• Differential Amplifiers• Sinusoidal OscillatorsUnit-V: Communication Systems• Modulation and Demodulation• Digital Communication• Communication Channels• Optoelectronic DevicesUnit-VI: Power Electronics• Power Semiconductor Devices• Power ConvertersUnit-VII: Analog Integrated Circuits• Integrated Circuits• Operational Amplifiers and Their Parameters• Op-Amps with Negative Feedback

• Frequency Response of an Op-Amp• General Linear Applications of Op-Amps• Active Filters• Phase-Locked Loops (PLL)• Regulated and Switching Power SuppliesUnit-VIII: Pulse and Digital Circuits• Pulse Signals• Linear Wave Shaping• Nonlinear Wave Shaping• Switching Circuits (Multivibrators)• The 555 IC Timer• Waveform Generators

(Sinusoidal as well as Non-Sinusoidal)• Nonlinear CircuitsUnit-IX: Digital Electronics• Number Systems and Codes• Logic Gates and Boolean Algebra• Logic Circuits• Digital Logic Families• Digital-to-Analog and Analog-to-Digital Converters• Microcomputers and MicroprocessorsUnit-X: Electronic Measurements andInstrumentation• Electronic (Analog as well as Digital) Instruments• Cathode Ray Oscilloscope• Transducers• Appendices• Index

Size : 20 x 30/8Pages : 575 Approx.ISBN : 978-93-5014-331-5

Price Rs. : 295/-Third Edition : 2012

BASIC ELECTRICALAND ELECTRONICS

ENGINEERING

By: J.B. Gupta

CONTENTS :Unit-I: Basic Concept of ElectricalEngineering• Introductory Concepts• Resistive NetworksUnit-II: Alternating Quantities• AC Fundamentals• Single Phase Series Circuits• Complex Notations and Circuit Analysis• Single Phase Parallel and Series-Parallel

Circuits• Three-Phase AC SystemUnit-III: Rotating Electrical Machines• DC Machines (Generators and Motors)• Three-Phase Induction Motors• Synchronous Machines (Generators

and Motors)

Unit-IV: Basic Electronics• Semiconductors and P-N Junction

Theory• Semiconductor Diodes• Rectifiers• Bipolar Junction Transistor (BJT)• Field-Effect Transistors (FETs)• Digital ElectronicsUnit-V: Communication Systems &Instrumentation and Control• Communication Systems• Instrumentation and Control

(Transducers And ICs)• Model Test Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS8

ANALOGELECTRONICS

(BASIC ANALOGELECTRONICS)

(I.P.)

By: J.B. Gupta

Size : 20 x 30/8Pages : 415 Approx.ISBN : 978-93-5014-173-1

Price Rs. : 265/-Reprint : 2012

CONTENTS :Unit I: Semiconductor Diodes andRectifiers• Basic Semiconductor and P-N Junction

Theory• Semiconductor Diodes• Zener and Other Two-Terminal Devices• RectifiersUnit II: Bipolar Junction Transistor andBias Stabilization• Bipolar Junction Transistor (BJT)• BIAS Stabilization• Small Signal Amplifiers

Unit III: Multistage Amplifiers andFeedback Amplifiers• Multistage Amplifiers• Feedback AmplifiersUnit IV: Field-Effect Transistors,UJT and SCR• Field-Effect Transistors (FETs),

UJT and SCR• Examination Papers• Index

CONTENTS :Unit-1: Building Blocks of Analog ICs• Differential Amplifiers• Operational Amplifiers (Op-Amps)• Linear Applications of Op-Amps)• Operational Transconductance Amplifier

(OTA)Unit-II: Waveform Generation• Transistor Oscillators (Sinusoidal)• IC Waveform GeneratorsUnit-III: Power Amplifiers andWaveshaping• Power Amplifiers

Size : 20 x 30/8Pages : 415 Approx.ISBN : 978-93-5014-211-0

Price Rs. : 250/-First Edition : 2012

ANALOGELECTRONICS

(I.P.)

By: J.B. GuptaRajeev ManglikRohit Manglik

• Tuned Amplifiers• Linear Waveshaping• Nonlinear Waveshaping• Nonlinear CircuitsUnit-IV: Active RC Filters andApplications of IC Analog Multiplier• Active Filters• Phase-Locked Loops• Voltage Regulators• Function Generators• Examination Papers• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-080-2

Price Rs. : 265/-First Edition : 2011

ELEMENTS OFELECTRONICDEVICES AND

CIRCUITS

By: J.B. Gupta

CONTENTS :Unit-I: Semiconductor Diodes andApplications• Energy Bands and Charge Carriers in

SemiconductorsJunction Diodes and other Two-Terminal Devices• Diode CircuitsUnit-II: Bipolar Junction Transistors(BJTs)• Bipolar Junction Transistors (BJTs)• Transistor Biasing and Stabilization• h-Parameter Equivalent Circuits and

Transistor Amplifier Analysis

Unit-III: Small Signal Amplifiers atLow Frequency• Field-Effect Transistors (FETs)• Small Signal Low-Frequency

Transistor Amplifiers and FrequencyResponse

• Multistage AmplifiersUnit-IV: Feedback Amplifiers• Feedback AmplifiersUnit-V: Oscillators• Sinusoidal Oscillators• Multivibrators• Model Test Papers• Index

BASIC ELECTRICAL& ELECTRONICSENGINEERING

(HPTU)

By: J.B. Gupta

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-361-2

Price Rs. : 295/-First Edition : 2012

CONTENTS :Section-A :• DC Circuits• AC Fundamentals• Complex Numbers• Electrical Instruments• Domestic Electric WiringSection-B :• Single-Phase Series Circuits• Single-Phase Parallel and Series

Parallel Circuits• Three-Phase AC Circuits• Transformers• DC Machines (Generators and Motors)• AC Machines (Synchronous and Induction

Machines)

Section-C :• Semiconductor and P-N Junction Theory• Semiconductor Diodes• Rectifiers• Bipolar Junction Transistor (BJT)Section-D :--• Field-Effect Transistors (FETs)• Integrated Circuits (ICs)• Electronic Instruments• Appendix• Model Test Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 9

Size : 20 x 30/8Pages : 370 Approx.ISBN : 978-93-5014-293-6

81-89757-32-6

Price Rs. : 250/-First Edition : 2012

ANALOG DEVICESAND CIRCUITS

By: J.B. GuptaRajeev ManglikRohit Manglik

(RGTU)

CONTENTS :Unit-1: Introduction to DataCommunication and Networks• Introduction to Data Communication

and NetworksUnit-II: Physical Layer• Physical LayerUnit-III: Data Link Layer• Data Link LayerUnit-IV: Medium Access Sublayer• Medium Access Sublayer

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-5014-010-9

Price Rs. : 240/-First Edition : 2010

FUNDAMENTALS OFDATA

COMMUNICATION &NETWORKS

By: Sanjay Sharma

Unit-V: Network HardwareComponents• Network Hardware Components• Network Layer and Protocols• Model Question Paper for Practice• Index

CONTENTS :Unit-I: Semiconductor Diodes• Junction Diodes• Special Purpose DiodeUnit-II: Transistor Characteristics andBiasing• Bipolar Junction Transistors (BJTs)• Transistor Biasing and Stabilization• Field-Effect Transistors (FETs) and UJTUnit-III: Large Signal Amplifiers• Large Signal Amplifiers

Unit-IV: Feedback Amplifiers andOscillators• Feedback Amplifiers• Sinusoidal OscillatorsUnit-V: Low and High FrequencyTransistor Model• Low And High Frequency Transistor

Model• Appendices• Model Test Papers• Index

CONTENTS :Unit-1:• Special DiodesUnit-II:• Frequency Response• FeedbackUnit-III:• OscillatorsUnit-IV:• Combinational Logic Circuits• Sequential Logic Circuits Flip-Flops• Shift Registers• CountersUnit-V:• Op-Amps Applications• A/D and D/A Converters

By: Dr. Sanjay Sharma

ANALOG ANDDIGITAL

ELECTRONICS

• Voltage Regulators• Memories• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 575 Approx.ISBN : 978-93-5014-046-8

Price Rs. : 285/-Third Edition : 2012

CONTENTS :Unit-I:• Semiconductor Materials and Properties• P-N Junction DiodeUnit-II:• Rectifiers and Filters• Zener Diode and Voltage RegulationUnit-III:• Bipolar Junction TransistorUnit-IV:• Transistor Biasing and Stabilization

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-039-0

Price Rs. : 275/-First Edition : 2010

ELECTRONICDEVICES AND

CIRCUITS

By: Sanjay Sharma

(JNTU)

Unit-V:• Small Signal Low Frequency BJT ModelsUnit-VI:• Field Effect TransistorUnit-VII:• FET AmplifiersUnit-VIII:• Special Purpose Electronic Devices• Objective Type Question Bank• Model Question Papers for Practice• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS10

DIGITALSIGNAL

PROCESSING(For RGTU)

CONTENTS :Unit-I:• Introduction To DSP• Discrete-Time Signals• Discrete-Time SystemsUnit-II:• The Z-TransformUnit-III:• Frequency Analysis of Discrete-Time

Signals: Discrete Fourier Series (DFS)• Frequency Analysis of Discrete-Time

Signals: Discrete Fourier TransformsBy: Dr. Sanjay Sharma

Unit-IV:• Efficient Computation of DFT: FFT

AlgorithmsUnit -V:• Digital Filters Design Techniques: IIR

Digital Filters• Digital Filters Design Techniques: FIR

Digital Filters• Model Question Paper• Index

CONTENTS :Unit-1:• SignalsUnit-II:• The Laplace Transform (LT)• The z-TransformUnit-III:• Continuous-Time Fourier Transform

(CTFT)• Discrete-Time Fourier Transform (DTFT)Unit-IV:• Systems• Correlation, ESD and PSD

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-013-0

Price Rs. : 295/-Nineth Edition : 2012

SIGNALSand

SYSTEMS

By: Dr. Sanjay Sharma

(For UPTU)

Unit-V:• Time and Frequency Domain Analysis

of Systems• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-008-6

Price Rs. : 250/-Second Edition : 2013

CONTENTS :• Signals• The Laplace Transform• The z-Transform• Continuous-Time Fourier Transform

(CTFT)• Discrete-Time Fourier Transform

(DTFT)• Systems• Correlation, ESD and PSD• Time and Frequency Domain Analysis of

Systems• SamplingBy: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 900 Approx.ISBN : 978-93-5014-229-5

81-85749-08-6

Price Rs. : 395/-Reprint : 2013

SIGNALSand

SYSTEMS

Size : 20 x 30/8Pages : 575 Approx.ISBN : 978-93-5014-058-1

Price Rs. : 265/-Fifth Revised Edition : 2012

INTEGRATEDCIRCUITS

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Analog Integrated Circuit Design:

An Overview• The 741 IC OP-AMPUnit-II:• Linear Applications of IC OP-AMPS• Filters• Sinusoidal OscillatorsUnit-III• Digital Integrated Circuits Design

(with MATLAB Programs)(Two Colour Edition)

Unit-IV:• Non-Linear Applications of IC

OP-AMPS• Analog MultipliersUnit-V:• D/A and A/D Converters• Integrated Circuit Timer• Phase Locked Loops (PLL)• Previous Year Question Paper• Index

• Probability, Random Signals andRandom Process

• Steady Space Analysis• Noise• Matched Filter (Optimum Filter)• Appendices• Objective Type Questions• Model Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 11

OP-AMPsand LINEAR

INTEGRATEDCIRCUITS

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-81-906919-0-1

Price Rs. : 300/-Third Edition : 2012

CONTENTS :• Introduction to Differential Amplifier and

OP-AMP• Operational Amplifier Fundamentals• OP-AMPS with Negative Feedback• Basic Applications of Operational-

Amplifiers• Waveform Generators• Digitally Controlled Frequency

Synthesizers PLLs• Active Filters• Non-Linear Applications of OP-AMPsBy: Dr. Sanjay Sharma

• Analog Multiplier Circuits• Operational Transconductance Amplifier

(OTA)• Voltage Regulators• D/A and A/D Converters• Power Amplifiers ICs• Appendices• Objective Type Questions• Model Question Papers for Practice• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-144-1

: 81-89757-34-2

Price Rs. : 295/-Reprint : 2012

PRINCIPLES OFCOMMUNICATION

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Introduction• Amplitude Modulation• Radio Transmitter ReceiverUnit-II:• Angle ModulationUnit-III:• Sampling Theory and Pulse Modulation• Digital Transmission of Analog Signals:

Pulse Code Modulation (PCM)• Issues in Digital Transmission:

Multiplexing and Line Coding

Unit-IV:• Waveform Coding Techniques and

NoiseUnit-V:• Noise Analysis in Communication

Systems• Phase-Locked Loops (PLLs):

Analog and Digital• Model Question Papers• Previous Year Question Papers• Index

ELECTRONICCIRCUITS

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Operational AmplifiersUnit-II:• Mosfets• Mosfet as Amplifier and SwitchUnit -III:• Bipolar Junction Transistor (BJT)• Transistor Amplifiers and ModelsUnit-IV:• Differential Amplifier

Size : 20 x 30/8Pages : 475 Approx.

ISBN : 978-93-5014-004-8

Price Rs. : 265/-Ninth Edition : 2013

Unit-V:• Feedback• Oscillators• Previous Year Question Paper• Index

ELECTRONICCIRCUITS

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Amplifier Basics• Transistor at Low Frequency• Transistor at High FrequencyUnit-II:• Feedback Amplifier• OscillatorsUnit-III:• Power Amplifier• Tuned AmplifierUnit-IV:• Cascade Amplifier• Differential Amplifier

Size : 20 x 30/8Pages : 495 Approx.

ISBN : 978-93-80027-17-3

Price Rs. : 285/-First Edition : 2013

Unit-V:• Operational Amplifier• Applications of Op-Amp• Model Question Paper• Index(For MP)

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS12

CONTENTS :Unit-I:• Digital System and Binary Numbers• Gate Level Minimization

Unit-II:• Combinational Logic

Unit-III:• Synchronous Sequential Logic: Flip-Flops• Synchronous Sequential Logic:

Shift Registers• Counter and Analysis and Synthesis of

Synchronous Sequential Circuits

Size : 20 x 30/8Pages : 575 Approx.

ISBN : 978-81-907386-7-5

Price Rs. : 295/-Third Edition : 2011

DIGITALELECTRONICS(Digital Logic Design)

By: Sanjay Sharma

Unit-IV:• Introduction to Memories• Programmable Logic Devices• Design at the Register Transfer

Level: ASMs

Unit-V:• Asynchronous Sequential Logic• Introduction to Hazards• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 445 Approx.ISBN : 978-93-5014-063-5

Price Rs. : 275/-Second Edition : 2012

ANALOGINTEGRATEDELECTRONICS

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Introduction• Frequency Response and Stability of

OP-AMP

Unit-II:• OP-AMPS with Negative Feedback• Basic Applications of Operational

Amplifiers

Unit-III:• Active Filters• Converters

Size : 20 x 30/8Pages : 460 Approx.ISBN : 978-93-80027-99-9

Price Rs. : 250/-Second Edition : 2012

By: Dr. Sanjay Sharma

ELECTRONICDEVICES

CONTENTS :

Unit-I:• Semiconductor Materials and Properties• Semiconductor DiodesUnit-II:• Diode ApplicationsUnit-III:• Diodes Family: Breakdown Diodes• Diodes Family: Special DiodesUnit-IV:• Bipolar Junction Transistor (BJT)

Unit-V:• FET Construction• Model Question Papers• Index

DIGITALIMAGE

PROCESSING

By: Sanjay Sharma

CONTENTS :• Introduction and Fundamentals• Image Enhancement in Spatial Domain• Image Enhancement in Frequency

Domain• Image Restoration• Colour Image Processing• Morphological Image Processing• Registration• Image Segmentation• Feature Extration

• Object Representation and Description• Pattern/Object Recognition• Image Compression• Image Processing Software• Bibliography• Model Question Papers• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-087-1

Price Rs. : 230/-Reprint : 2012

Unit-IV:

• Non-Linear Applications of OP-AMPS

• Voltage Regulation

Unit-V:• Non-Linear Amplifiers and

Analog Multiplier Circuits• Operational Transconductance

Amplifier (OTA)• Phase-Locked Loops (PLLs)• Noise i4n Integrated Circuits• Model Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 13

CONTENTS :Unit-I:• Semiconductor Devices• Transistor as an Amplifier

Unit-II:• Feedback• Sinusoidal Oscillators• Power Amplifiers

Unit-III:• Waveshaping Circuits: Multivibrators,

Clippers and Clampers• Differential Amplifiers

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-265-3

Price Rs. : 315/-Second Edition : 2012

ELECTRONICDEVICES &CIRCUITS

By: Dr. Sanjay Sharma

• Multistage Amplifiers

Unit-IV:• Operational Amplifier Characteristics• Basic Applications of OP-AMPs

Unit-V:• Voltage Regulators• Model Question Papers• Index

COMMUNICATIONSYSTEMS

(ANALOG and DIGITAL)

CONTENTS :Unit-I:• Introduction• Random Variables

Unit-II:• Digital Conversion of Analog Signals• Digital Transmission of Analog Signals

Unit-III:• Digital Transmission Techniques

Unit-IV:• Other Digital Techniques• Optimum Reception of Digital Signals

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-80027-94-4

Price Rs. : 295/-Second Edition : 2012

DIGITALCOMMUNICATION

By: Dr. Sanjay Sharma

(For RGTU)

Unit-V:• Information Theory• Channel Coding• Model Question Papers• Index

Two Colour edition

CONTENTS :• Introduction• Mobile Radio Propagation• Mobile Communication Concepts• Modulation Techniques in Wireless

Communication• Receiver Techniques for Fading

Dispersive Channels• Speech Coding for Wireless

Systems Applications• Multiple Access Techniques• Introduction to Networking in Wireless

Mobile Communication• Introduction to Mobile Communication

Standards

• Mobile Data Communications• Wireless Local Area Networks• Mobile Satellite Systems and Third

Generation Cellular Systems• Introduction to Intelligent Cell Concept

in Mobile Communication• Intelligent Network for Wireless

Communications• Mobile Communications Related Topics• Spread-Spectrum Techniques• Wireless Architectures• Appendices• Model Question Papers• Index

Size : 20 x 26/8Pages : 850 Approx.ISBN : 81-89757-49-0

Price Rs. : 325/-Reprint : 2012

WIRELESS& CELLULAR

COMMUNICATIONS

By: Sanjay Sharma

Size : 20 x 30/8Pages : 1175 Approx.ISBN : 978-93-5014-359-9

81-88458-20-1

Price Rs. : 495/-Reprint : 2013

CONTENTS :• Introduction• Signal Analysis and Transmission• Amplitude Modulation• Angle Modulation• Probability, Random Signals and

Random Process• Noise• Performance of Communication Systems• Radio Receivers• Sampling Theory and Pulse Modulation• Waveform Coding Techniques• Digital Multiplexers• Digital Data Transmission

By: Dr. Sanjay Sharma

• Digital Modulation Techniques• Performance Analysis of Digital

Communication Systems• Information Theory• Error Control Coding• Appendices• Model Question Papers for Practice• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS14

CONTENTS :Unit-I:• Introduction to Networks and

Data Communications• Physical Layer and Data TransmissionUnit-II:• Switching• The Data Link LayerUnit-III:• Medium Access SublayerUnit-IV:• Network Layer• Network Connecting Devices

DATACOMMUNICATION

NETWORKS

By: Dr. Sanjay Sharma

Unit-V:• Transport Layer Protocol• Network Security and Cryptography• Model Question Papers• Index

CONTENTS :Unit-I:• Introduction : Evolution of Mobile Radio

Communication Fundamentals• Mobile Radio Propagation

Unit-II:• Spread-Spectrum Communications• Equalization and Diversity Techniques

Unit-III:• Speech Coding and Multiple Access

Techniques

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-223-3

: 81-89757-01-6

Price Rs. : 295/-Reprint : 2013

WIRELESSCOMMUNICATIONS

By: Dr. Sanjay Sharma

Unit-IV:• Cellular Concepts• Wireless Systems and Standards• Some Emerging Wireless Network

Technologies• Appendices• Index

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-170-0

: 81-89757-42-3

Price Rs. : 275/-Reprint : 2012

CONTENTS :• Introduction to Computer Networks• Examples of Network• Physical Layer and Data Transmission• Data Link Layer• Medium Access Sublayer• Network Layer• Transport Layer• Application Layer• Glossary• Model Question Papers• Examination Papers• Index

Size : 20 x 30/8Pages : 540 Approx.ISBN : 978-93-80027-13-5

Price Rs. : 285/-Reprint : 2012

DATACOMMUNICATION

By: Dr. Sanjay Sharma

By: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-210-3

Price Rs. : 295/-Reprint : 2013

Introduction toDATA

COMMUNICATIONNETWORKS

CONTENTS :Unit-I:• Introduction to Data Communication

and Networks• Examples of Networks• Physical Layer and Data TransmissionUnit-II:• The Data Link Layer• Medium Access SublayerUnit-III:• The Network Layer• Network Hardware Components

Unit-IV:• Transport Layer• The TCP/IP Protocol SuiteUnit-V:• Application Layer Services• Model Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 15

CONTENTS :• Introduction• Sampling Theory and Pulse

Modulation• Waveform Coding Techniques• Digital Multiplexers• Digital Data Transmission• Digital Modulation Techniques• Performance Analysis of Digital

Communication Systems• Information Theory

DIGITALCOMMUNICATIONS

By: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-268-4

81-88458-19-8

Price Rs. : 375/-Sixth Edition : 2013

• Error Control Coding• Spread Spectrum Communication• Model Question Paper• Index

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-80027-24-1

Price Rs. : 295/-Reprint : 2013

DIGITALCOMMUNICATIONS

For UPTU

CONTENTS :Unit-I:• Introduction• Digital Data Transmission• Digital Modulation Techniques

Unit-II:• Probability and Random Variables

Unit-III:• Performance Analysis of Digital

Communication System

By: Dr. Sanjay Sharma

Unit-IV:• Spread Spectrum CommunicationsUnit-V:• Information Theory• Error Control Coding• Previous Years Question Paper• Index

By: Sanjay Sharma

DIGITALCOMMUNICATIONS

(For PTU)

Size : 20 x 26/8Pages : 450 Approx.ISBN : 81-89757-06-7

Price Rs. : 225/-Reprint : 2013

CONTENTS :• Introduction• Digital Transmission• Digital Carrier Line Encoding• Multiplexing Techniques• Information Theory• Digital Carrier Modulation and

Demodulation Techniques• Appendices• Model Question Papers• Previous Years Question Papers• Index

CONTENTS :Unit-I:• Introduction to Digital Signal Processing

(DSP)• Realisation of Digital Systems

Unit-II:• Design of Infinite Impulse Response

Digital Filters

Unit-III:• Finite Impulse Response Filter Design

Unit-IV:• Discrete Fourier Transforms

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-80027-16-6

Price Rs. : 275/-Reprint : 2013

DIGITAL SIGNALPROCESSING

By: Dr. Sanjay Sharma

(For UPTU)

Unit-V:• Fast Fourier Transform Algorithms• Appendices• Previous Year Question Paper• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS16

CONTENTS :• Introduction to Digital Signal Processing

(DSP)• Discrete-Time Signals• Discrete-Time Systems• The Z-Transform• Discrete Fourier Transforms• Fast Fourier Transform Algorithms• Design and Analysis of Infinite Impulse

Response (IIR) Digital Filters• Design and Analysis of Finite impulse

Response (FIR) Filter Design• Realisation of Digital Systems

Size : 20 x 30/8Pages : 925 Approx.ISBN : 978-93-5014-400-8

81-88458-42-2

Price Rs. : 395/-Sixth Edition : 2013

DIGITAL SIGNALPROCESSING

By: Dr. Sanjay Sharma

(With MATLAB Programs)

CONTENTS :• Introduction to Digital Signal Processing

(DSP)• Introduction to Discrete-Time Signals

and Systems• Discrete-Time LTI Systems• Frequency Analysis of Discrete Time

Fourier Transform (DTFT)• The z-Transform• Discrete Fourier Transform (DFT)• Efficient Computation of DFT: Fast

Fourier Transform Algorithms• Implementation of Discrete-Time

Systems

DIGITAL SIGNALPROCESSING

By: Sanjay Sharma

(For PTU)

• Theory and Design of Finite ImpulseResponse (FIR) Filters

• Theory and Design of IIR Digital Filters• Introduction to DSP Processors• Model Question Papers• Previous Years Question Papers• Index

CONTENTS :• Signals and Signal Processing• Time Domain Representation of Signals

and Systems• Transform-Domain Representation of

Signals: DTFT• Transform-Domain Representation of

Signals: z-Transform• Transform-Domain Representation of

Signals: Discrete Fourier Transform (DFT)• Transform-Domain Representation of

Signals: Fast Fourier Transform (FFT)Algorithms

DIGITAL SIGNALPROCESSING

By: Dr. Sanjay Sharma

(For GGSIPU)

• Transform-Domain Representation ofLTI Systems

• Digital Processing of Continuous-timeSignals

• Digital Filter Structure• Digital Filter Design: FIR Filters• Digital Filter Design: IIR Filters• Applications of Digital Signal Processing

(DSP)• Model Question Papers• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-80027-02-9

Price Rs. : 285/-Reprint : 2012

Size : 20 x 26/8Pages : 525 Approx.ISBN : 81-89757-04-0

Price Rs. : 210/-Reprint : 2011

• Finite Word Length Effects in DigitalFilters

• Statistical Digital Signal Processing• Multiple Digital Signal Processing

(MDSP)• Introduction to DSP Processors• Applications of Digital Signal Processing

(DSP)• Appendix• Model Question Papers• Index

DIGITALIMAGE

PROCESSING

By: Dr. Sanjay Sharma

Size : 20 x 26/8Pages : 375 Approx.ISBN : 978-93-5014-137-3

Price Rs. : 250/-Third Edition : 2011

CONTENTS :Unit-I: Introduction and Digital ImageFundamentals and Image Enhancement inThe Spatial Domain• Introduction and Digital Image

Fundamentals• Image Enhancement in the Spatial

Domain

Unit-II: Image Enhancement in theFrequency Domain and ImageRestoration• Image Enhancement in the Frequency

Domain

• Image Restoration

Unit-III: Image Compression and ImageSegmentation• Image Compression• Image Sementation

Unit-IV: Representation & Descriptionand Object Recognition• Representation and Description• Morphological Image Processing• Object Recognition• Model Question Paper• Previous Years Question Papers• Index

(For IP)

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 17

CONTENTS :• Introduction• Signal Analysis and Transmission• Amplitude Modulation : DSB-FC, DSB-

SC, SSB-SC, VSB• Angle Modulation• Sampling Theory and Pulse Modulation• Probability, Random Signals and Random

Process• Noise• Performance of Communication Systems• Radio Receivers

Size : 20 x 30/8Pages : 650 Approx.ISBN : 978-93-5014-379-7

81-88458-00-7

Price Rs. : 310/-Sixth Revised Edition : 2013

ANALOGCOMMUNICATION

SYSTEMS

By: Dr. Sanjay Sharma

• Radio Transmitters• Objective Type Questions• Appendices• Model Question Papers for Practice• Index

CONTENTS :Unit-I:• Introduction• Signal Analysis and Linear Time Invariant

(LTI) Systems

Unit-II:• Modulation Techniques

Unit-III:• Angle Modulation and FM Modulators

Unit-IV:• Radio Transmitters• Radio Receivers

ANALOGCOMMUNICATION

By: Sanjay Sharma

Unit-V:• Noise• Noise Performance of Communication

Systems• Model Question Papers• Previous Year Question Paper• Index

CONTENTS :Unit-I:• Introduction• Amplitude Modulation• Radio Transmitters• Radio Receivers

Unit-II:• Angle Modulation• Noise

Unit-III:• Sampling Theory & Pulse Modulation• Waveform Coding Techniques

Size : 20 x 26/8Pages : 575 Approx.ISBN : 81-89757-52-0

Price Rs. : 295/-Reprint : 2013

ANALOG & DIGITALCOMMUNICATION

By: Dr. Sanjay Sharma

Unit-IV:• Digital Modulation Techniques

Unit-V:• Digital Multiplexers• Information Theory• Model Question Papers for Practice• Index

(RGTU)

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-80027-23-4

Price Rs. : 265/-Reprint : 2012

CONTENTS :Unit One:• Semiconductor Materials and Properties• Semiconductor Diodes• Semiconductor Diode Applications• Breakdown DiodesUnit Two:• Bipolar Junction Transistor• Transistor as an AmplifierUnit Three:• Field Effect Transistor• Operational Amplifier

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-178-6

81-85749-95-7

Price Rs. : 395/-Reprint : 2012

ELECTRONICSENGINEERING

By: Dr. Sanjay Sharma

Two Colour Edition

Unit Four:• Switching Theory and Logic DesignUnit Five:• Electronics Instruments• Voltage and Current Sources• Objective Type Question Bank• Model Question Papers• Previous Years Question Papers

with Solution• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS18

CONTENTS :Unit-I:• Introduction to Electronics• Semiconductor Diode• Diode Applications• Special Purpose Diodes

Unit-II:• Bipolar Junction Transistor (BJT)• Transistor as an Amplifier• Junction Field Effect Transistor (JFET)

Unit-III:• Feedback Amplifiers• Oscillators

Size : 20 x 30/8Pages : 575 Approx.ISBN : 978-81-907386-4-4

Price Rs. : 250/-First Edition : 2008

ELECTRONICS Unit-IV:• Power Amplifiers• Voltage Regulators

Unit-V:• Design and Applications of

Electronics Circuits• Model Question Papers• Previous Years Question Paper• Index

CONTENTS :Unit-I:• Special Diodes• Bipolar Junction Transistors

Unit-II:• Transistor Amplifiers• Field Effect Transistor and MOSFETs

Unit-III:• Frequency Response

Unit-IV:• Feedback

Size : 20 x 30/8Pages : 600 Approx.ISBN : 81-88458-35-X

Price Rs. : 275/-Reprint : 2009

SOLID STATEDEVICES and

CIRCUITS

Unit-V:• Oscillators• Model Question Papers for Practice• Previous Years Question Papers with

Solutions• Bibliography• Index

CONTENTS :Unit-I:• Services and Technical Challenges• Principle of Cellular Networks• Multiple Access Techniques

Unit-II:• Wireless Propagation Channels: Mobile

Radio Propagation

Unit-III:• Wireless Transceivers

Unit-IV• Signal Processing in Wireless Systems:

Diversity Techniques

Size : 20 x 30/8Pages : 480 Approx.ISBN : 978-93-5014-351-3

Price Rs. : 275/-First Edition : 2012

WIRELESSCOMMUNICATION

SYSTEMS

By: Dr. Sanjay Sharma

• Signal Processing in Wireless Systems:Speech Coding Techniques

Unit-V:• Spread Spectrum Systems• An Overview of CDMA and WCDMA• Wireless Networks• Wireless Systems and Standards• Review of Basic Digital Modulation

Techniques• Model Question Paper• Index

By: Sanjay Sharma

By: Sanjay Sharma

CONTENTS :Unit-I:• Introduction: Evolution of Mobile

Communication Fundamentals• Mobile Radio PropagationUnit-II:• Equalization and Diversity Techniques• Speech Coding and Multiple Access

TechniquesUnit-III:• Cellular ConceptsUnit-IV:• Wireless Networks

Size : 20 x 30/8Pages : 460 Approx.ISBN : 978-93-5014-221-9

Price Rs. : 265/-Reprint : 2013

MOBILE & WIRELESSCOMMUNICATIONS

By: Dr. Sanjay Sharma

• Wireless Systems and StandardsUnit-V:• Some Emerging Wireless Network

Technologies• An Overview of CDMA2000,

WCDMA and Edge• Wireless Architectures• Appendices• Model Question Paper• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 19

CONTENTS :Unit-I:• Signal Analysis

Unit-II:• Fourier Series Representation of

Periodic Signals

Unit-III:• Fourier Transforms

Unit-IV:• Signal Transmission through Linear

Systems

SIGNALSAND

SYSTEMS(JNTU)

By: Sanjay Sharma

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-054-3

Price Rs. : 275/-First Edition : 2010

Unit-V:• Convolution and Correlation of Signals

Unit-VI:• Sampling

Unit-VII:• Laplace Transforms

Unit-VIII:• Z-Transforms• Model Question Papers• Index

CONTENTS :Unit-I:• Differential Amplifier• Operational Amplifier Characteristics• Op-Amp with Negative Feedback• Linear Applications of Op-AmpsUnit-II:• Waveform Generators• Phase Locked Loop (PLL)Unit-III:• Active Filters

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-81-906919-8-7

Price Rs. : 275/-Second Edition : 2009

ANALOGINTEGRATED

CIRCUITS

By: Sanjay Sharma

Unit-IV:• Non-Linear Applications of Op-Amp• Analog Multipliers• Operational Transconductance Amplifier

(OTA)Unit-V:• Voltage Regulators• Appendix• Previous Years Question Papers• Index

CONTENTS :• Introduction to Electronics• Voltage and Current Sources• Semiconductor Materials and Properties• Semiconductor Diodes• Semiconductor Diode Applications• Breakdown Diodes• Special Diodes• Bipolar Junction Transistor (BJT)• Transistor as an Amplifier• Field-Effect Transistor (FET)• Multistage Amplifier• Tuned Voltage Amplifiers

Size : 20 x 30/8Pages : 800 Approx.ISBN : 81-89757-88-1

Price Rs. : 350/-Reprint : 2012

ELECTRONICPRINCIPLES

By: Sanjay Sharma

• Feedback• Oscillators• Switching Theory and Logic Design• Operational Amplifiers• Introduction to Wave Shaping Circuits• Introduction to Thyristors• Model Questions Papers• Index

A Textbook ofELECTRONIC

ENGINEERING

Size : 20 x 30/8Pages : 615 Approx.ISBN : 978-93-5014-323-0

Price Rs. : 395/-Fourteenth Edition : 2012

By: Dr. Sanjay Sharma

CONTENTS :Unit-1:• Introduction to Electronics• Semiconductor Materials• Diode Fundamentals• Diode Circuits• Special Purpose Diodes

Unit-II:• Bipolar Junction Transistors (BJTs):

Transistor Fundamentals• Transistor Circuits

Unit-III:• Field Effect Devices: JFET• Field Effect Devices: MOSFETs

Unit-IV:• Operational Amplifiers

Unit-V:• Electronic Instrumentation and

Measurements• Model Question Paper• Index

Two Colour edition

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS20

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-140-3

Price Rs. : 250/-Reprint : 2012

FUNDAMENTALS OFCOMMUNICATION

ENGINEERING

By: Dr. Sanjay Sharma

CONTENTS :Section-A: Introduction• Spectral Analysis• Correlation: Cross-Correlation and

Auto-CorrelationSection-B: Information TheorySection-C: Random Signal Theory-ISection-D: Random Signal Theory-II• Optimum Filters• Introduction to Linear Block

Codes and Cyclic Codes• Model Question Papers• Index

Size : 20 x 30/8Pages : 524 Approx.ISBN :

Price Rs. : 275/-First Edition : 2011

FUNDAMENTALS OF

DIGITALSIGNAL

PROCESSING

By: Dr. Sanjay Sharma

DIGITALSIGNAL

PROCESSING

By: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-171-7

Price Rs. : 265/-Reprint : 2013

(MDU)

CONTENTS :Unit-I :• Introduction to DSP• SamplingUnit-II :• Transform Analysis of LTI SystemsUnit-III :• Structures for Discrete-Time SystemsUnit-IV :• Filter Design Techniques: IIR Filter Design• Finite Impulse Response Filter Design

Unit-V :• Discrete Fourier Transforms• Efficient Computation of

the DFT: Fast Fourier Transforms• Index

CONTENTS :

Unit-I: Introduction to Digital SignalProcessing• Discrete-Time SignalsUnit-II : Discrete-Time SystemsUnit-III : Sampling of Time SignalsUnit IV : The Z-Transform (ZT)Unit-V : Finite Impulse ResponseFilter Design• Design of Infinite Impulse Response

Digital Filters

• Finite World Length Effects in DSP• Applications of DSPUnit-VI : Multirate Digital SignalProcessing (MDSP)• Previous Years Question Papers• Index

CONTENTS :Section-A:• Introduction to Communication Systems• Fourier Analysis of Signals

Section-B:• Amplitude Modulation• Angle Modulation

Section-C:• Pulse Analog Modulation• Pulse Digital Modulation

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-100-7

Price Rs. : 295/-Reprint : 2013

PRINCIPLES OFCOMMUNICATION

SYSTEMS

By: Dr. Sanjay Sharma

Section-D:• Digital Modulation Techniques• Introduction to Noise• Previous Years Questions Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 21

(UTU)

CONTENTS :Unit-I & II:• Introduction• Amplitude Modulation• Radio Transmitter and ReceiverUnit-III:• Angle ModulationUnit-IV:• Sampling Theory and Pulse Modulation• Digital Transmission of Analog Signals:

Pulse Code Modulation (PCM)• Issues in Digital Transmission:

Multiplexing and Line Coding

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-117-5

Price Rs. : 275/-Eight Revised Edition : 2013

ELEMENTS OFANALOG

COMMUNICATION

By: Dr. Sanjay Sharma

DIGITALELECTRONICS

AND LOGICDESIGN

By : Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 700 Approx.ISBN : 978-93-5014-199-1

Price Rs. : 325/-Reprint : 2012

CONTENTS :• Digital System and Binary Numbers• Boolean Algebra and Minimization

Techniques• Logic Gates• Combinational Logic Circuits• Synchronous Sequential Logic: Flip-Flops• Shift Registers• Counters• Semiconductor Memories• Programmable Logic Design (PLDs)• Algorithms State Machines (AMSs)• Asynchronous Sequential Logic

Unit-V:• Noise Associated with Communication

System• Appendix• Model Question Paper• Index

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Introduction• Amplitude Modulation• Single Sideband Modulation• Radio ReceiversUnit-II:• Angle Modulation• Noise• Noise Analysis in Communication

SystemsUnit-III:• Analog Pulse Modulation

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-238-7

Price Rs. : 285/-Reprint : 2013

FUNDAMENTALSOF

COMMUNICATIONENGINEERING

• Digital Transmission• Digital Modulation TechniquesUnit-IV:• Radio Wave Propagation• Satellite Communication• Wireless Systems and StandardsUnit-V:• Television• Fibre Optical Communication• Index

• Hazards• Logic Families• Multivibrators• Objective Type Questions• Model Question Papers• Index

CONTENTS :Section-A:• SignalsSection-B:• Fourier Transform (FT):

Continuous-Time Fourier Transform(CTFT)

• Discrete-Time Fourier Transform (DTFT)Section-C:• Introduction to Systems• Time and Frequency Domain Analysis of

Systems

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-099-4

Price Rs. : 295/-Reprint : 2013

FUNDAMENTALS OFSIGNALS AND

SYSTEMS

By: Dr. Sanjay Sharma

Section-D:• The Laplace Transform (LT)• The Z-Transform (ZT)• Model Question Paper• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS22

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-294-3

Price Rs. : 295/-Fourth Edition : 2012

DIGITALCIRCUITS &

LOGIC DESIGN

By: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-81-907386-8-2

Price Rs. : 225/-Reprint : 2012

DIGITALIMAGE

PROCESSING(UP)

By: Dr. Sanjay Sharma

CONTENTS :Unit-One:• Introduction and Fundamentals• Image Enhancement in the Spatial

DomainUnit-Two:• Image Enhancement in Frequency

DomainUnit-Three:• Image RestorationUnit-Four:• Morphological Image Processing

Unit-Five:• Registration• Image Segmentation• Bibliography• Previous Year Question Paper• Index

Size : 20 x 30/8Pages : 375 Approx.ISBN : 978-93-5014-155-7

Price Rs. : 225/-Reprint : 2012

Fundamentals ofANALOG

COMMUNICATION

By: Dr. Sanjay Sharma

(RTU)

CONTENTS :Unit-One:• Introduction• Noise Effects in Communication SystemsUnit-Two:• Amplitude ModulationUnit-Three:• Frequency ModulationUnit-Four• Noise in AM and FMUnit-Five:• Pulse Analog Modulation• Index

CONTENTS :Part A:• Number Systems• Boolean Algebra• Logic Gates• Logic Families• Combinational Logic Circuits

Part B:• Synchronous Circuits : Flip-Flops• Synchronous Circuits : Shift Registers• Sequential Circuits : Counters• Memory Devices

• Signal Conversions• Model Question Papers for Practice• Index

Size : 20 x 30/8Pages : 415 Approx.ISBN : 978-93-5014-390-2

Price Rs. : 265/-First Edition : 2013

DATACOMMUNICATION

NETWORKS(UTU)

By: Dr. Sanjay Sharma

CONTENTS :Unit-1:• Introduction• Example Networks• Physical Layer

Unit-II:• Data Link Layer• Medium Access Sublayer• Network Hardware Components

Unit-III:• Network Layer

Unit-IV:• Transport Layer

Unit-V:• Application Layer• World Wide Web (www)• Model Question Paper• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 23

CONTENTS :Unit-I:• Introduction to Signals• Introduction to SystemsUnit-II:• Fourier Series Representation of SignalsUnit-III:• Fourier Transform• Discrete-Time Fourier Transform (DTFT)Unit-IV:• The Z-Transform• The Laplace Transform

Size : 20 x 30/8Pages : 465 Approx.ISBN : 978-93-5014-156-4

Price Rs. : 265/-Reprint : 2012

A TEXTBOOK OFSIGNALS

& SYSTEMS

By: Dr. Sanjay Sharma

Unit-V:• Sampling• Model Question Paper• Index

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Introduction to Electronics• Voltage and Current Sources• Semiconductor Materials and Properties• Semiconductor Diodes• Semiconductor Diode Applications• Breakdown Diodes• Special Diodes• Bipolar Junction Transistor• Transistor as an Amplifier• Multistage Amplifiers• Field Effect Transistors

BASICELECTRONICS

• Operational Amplifiers• Feedback• Oscillators• Digital Electronics• Sequential Circuits: Flip-Flops and

Counters• Thyristors• Electronics Instruments• Model Question Papers• IndexSize : 20 x 30/8

Pages : 775 Approx.ISBN : 978-93-5014-257-8

Price Rs. : 365/-First Edition : 2012

ADVANCESEMICONDUCTOR

DEVICES

By: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-215-8

Price Rs. : 265/-Reprint : 2013

CONTENTS :Unit-I:• Semiconductor Materials and their

Properties• Carrier Transport in Semiconductors• Excess Carriers in Semiconductors

Unit-II:• Junctions and InterfacesUnit-III:• Majority Carrier DiodesUnit-IV:• Microwave Diodes• Optoelectronic Devices

Unit-V:• Metal Semiconductor Field-Effect

Transistors• Mos Transistors• Charge-Coupled Devices• Previous Year Question Papers• Index

Size : 23 x 36/8Pages : 850 Approx.

ISBN : 978-93-5014-146-5

Price Rs. : 475/-Reprint : 2013

QUESTION BANK INELECTRONICS &

COMMUNICATIONENGINEERING

By: Dr. Sanjay Sharma

CONTENTS :• Chapter-1: Materials and Components• Chapter-2: Electronic Devices and

Circuits• Chapter-3: Networks Analysis and

Synthesis• Chapter-4: Electromagnetic Field Theory• Chapter-5: Electronic Measurements and

Instrumentation• Chapter-6: Power Electronics• Chapter-7: Analog Electronics• Chapter-8: Digital Electronics• Chapter-9: Automatic Control Systems

• Chapter-10: Communication Systems(Analog and Digital)

• Chapter-11: Radio Receivers• Chapter-12: Microwave Communication• Chapter-13: Satellite Communication• Chapter-14: Microprocessors• Chapter-15: Signals and Systems• Test Papers• Full Length Tests Papers• Previous Year Papers

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS24

COMMUNICATIONENGINEERING

By: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 875 Approx.ISBN : 978-93-5014-129-8

Price Rs. : 365/-Reprint : 2012

CONTENTS :• Introduction to Communication

Engineering• Noise• Amplitude Modulation• Signal Sideband Modulation• Angle Modulation• Radio Receivers• Radio Wave Propagation• Analog Pules Modulation• Digital Transmission• Multiplexing• Antennas

• Satellite Communication• Television Principles• Radar System• Optical Communication• Introduction to Wireless Networks• Introduction to Wireless Systems and

Standards• Mobile Communication Concepts• OSI Reference Model and Network

Architecture• Digital Modulation Techniques• Index

Size : 20 x 30/8Pages : 515 Approx.ISBN : 978-93-5014-235-6

Price Rs. : 285/-Reprint : 2012

Fundamentals ofDIGITAL

COMMUNICATIONS

By: Dr. Sanjay Sharma

CONTENTS :Unit-I:• Introduction• Information TheoryUnit-II:• Waveform Coding Techniques• Digital Baseband TransmissionUnit-III & IV:• Introduction to Signal Space Analysis• Digital Modulation Techniques• Spread Spectrum Communications

Unit-V:• Error Control Coding• Model Question Papers• Index

Principles ofDIGITAL SIGNAL

PROCESSING

By : Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 470 Approx.ISBN : 978-93-5014-197-7

Price Rs. : 265/-Reprint : 2012

CONTENTS :Unit-One:• Introduction to DSP• Discrete Fourier TransformsUnit-Two:• Efficient Computation of DFT: FFTsUnit-Three:• Filter StructuresUnit-Four:• Design of Digital Infinite Impulse

Response (IIR) Filters

• Design of Infinite Impulse Response (FIR)Filters

• Introduction to Multirate Digital SignalProcessing (MDSP)

Unit-Five:• Adaptive Wiener Filter and Lms

Algorithm• Applications of DSP and Coding• Index

LINEARINTEGRATED

CIRCUITS

By : Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 250/-First Edition : 2012

CONTENTS :Unit-I:• Introduction to Differential Amplifier and

OP-AMPs• OP-AMP Configurations with Feedback

Unit-II:• Operational Amplifier Applications• Oscillators

Unit-III:• Active Filters

Unit-IV:• Phase Locked LoopsUnit-V:• Analog Multiplier Circuits• Voltage Regulators• Integrated Circuit Timer 555• Model Question Papers• Index

(RTU)

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 25

CONTENTS :Unit-I:• Semiconductor Materials and Crystal

Properties• Energy Bands and Charge Carriers in

Semiconductors

Unit-II:• Excess Carriers in Semiconductors

Unit-III:• Junction Properties

Unit-IV:• Bipolar Junction Transistors (BJTs)

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-329-2

Price Rs. : 265/-First Edition : 2012

FUNDAMENTLS OFELECTRONIC

DEVICES

By: Dr. Sanjay Sharma

• Field Effect Transistors

Unit-V:• Photonic Devices• Negative Conductance Microwave

Devices• Some Special Power Devices• Previous Year Question Papers• Index

DIGITALCIRCUITS &

SYSTEMS

By: Dr. Sanjay SharmaSize : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-345-2

Price Rs. : 295/-First Edition : 2012

CONTENTS :Unit-I:• Numbers Systems and Codes• Boolean Algebra and Switching

Functions

Unit-II:• Logic Gates, Adders and Subtractors

Unit-III:• Linear Wave Shaping Circuits• Logic F’amilies

Unit-IV:• Combinational Logic Circuits• Semiconductor Memories• Designing with ROM and PLA

• Shift Registers• Counters

Unit-V:• Signal Conversion: A to D and D to A

Converters• Model Question Paper• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN :

Price Rs. : 575/-First Edition : 2013

GATE 2013ELECTRONIC

COMMUNICATION

By: Dr. Sanjay Sharma

(RGTU)

CIRCUITS &SYSTEMS

• Feedback Amplifiers• Oscillators• Fourier Series• Fourier Transform and its Applications• Analogous Systems• State Variable Analysis• Magnetically Coupled Circuits• Appendices• Index

CONTENTS :• Introduction• Signals and Waveform Synthesis• Circuit Analysis by Classical Method• Laplace Transform• Circuit Analysis by Laplace Transform• Graph Theory• Network Theorems• Two-Port Networks• Network Functions and Responses• Network Synthesis• z-Transforms and its Applications• Filter Synthesis

Size : 20 x 30/8Pages : 800 Approx.ISBN : 978-93-5014-405-3

81-88458-06-6

Price Rs. : 350/-Ninth Edition : 2013

By : K.M. Soni

MICROELECTRONIC

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 250/-First Edition : 2013 By: Dr. Sanjay Sharma

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS26

CIRCUITS &SYSTEMS

By: Dr. K.M. Soni

CONTENTS :• Introduction to Circuit Elements• Signals and Waveform Synthesis• Circuit Analysis by Classical Method• Laplace Transform• Circuit Analysis by Laplace Transform• Graph Theory• Network Theorems• Two-Port Networks• Network Functions and Responses• Network Synthesis

(For GGSIPU)

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-057-4

Price Rs. : 230/-Tenth Edition : 2012

• Appendices• Index

CIRCUITANALYSIS

ANDSYNTHESIS

By: K.M. Soni

Size : 20 x 30/8Pages : 440 Approx.ISBN : 978-93-5014-142-7

Price Rs. : 265/-Reprint : 2012

CONTENTS :• Introduction to Circuit Elements• Network Theorems• Magnetically Coupled Circuits• Transient Analysis by Classical Method• Transient Analysis by Laplace Transform• Fourier Series• Two Port Networks• Network Function• Network Synthesis• Appendices• Appendix-A• Appendix-B

• Appendix-C• Appendix-D• Appendix-E• Appendix-F• Index

CONTENTS :• Signals• Systems• Linear Time Invariant Systems• Continuous-Time Fourier Transform and

its Applications• Discrete-Time Fourier Transform and its

Applications• Laplace Transform and its Applications• z-Transform and its Applications• Time and Frequency Domain Analysis of

Systems

Size : 20 x 30/8Pages : 400 Approx.ISBN : 81-89757-29-6

Price Rs. : 250/-Reprint : 2011

SIGNALSand

SYSTEMS

By : K.M. Soni

• Continuous Time Convolution andCorrelation

• Appendices• Index

(For UPTU)

CONTENTS :• Signals• Systems• Linear Time Invariant Systems• Fourier Series• Fourier Transform and its Applications• Fourier Analysis of Discrete-time Signals

and Systems• Time and Frequency Characterization of

Signals & Systems• Sampling• Laplace Transform and its Applications

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-317-9

81-89757-29-6

Price Rs. : 285/-Fourth Edition : 2012

SIGNALSand

SYSTEMS

By : Dr. K.M. Soni

• z-Transform and its Applications• State Variable Analysis• Introduction to Probability• Appendices• Index

(For IP)

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 27

CONTENTS :Part-A: Digital Control Engineering• Sampling and Signal Conversion• The z-Transform• Transfer Function, Block Diagrams and

Signal Flow Graphs• Transform Design of Digital Controls• State Space Analysis of Sampled Data

Systems• Design of Digital Controls Using State

Space Analysis• Mechanization of Control AlgorithmsPart-B: Optimal Control• Optimal Control

Size : 20 x 30/8Pages : 375 Approx.ISBN : 978-81-907386-0-6

Price Rs. : 230/-Fourth Edition : 2013

ADVANCEDCONTROLSYSTEMS

By: Dr. K.M. SoniP.M. Tiwari

Aysuhi Sharma

• Optimal Feedback Control• Stochastic Optimal Linear Estimation

and Control• Microprocessor Control and Single

Board Controller• Digital Signal Processor (DSP) ControlPart-C: Non-Linear System Analysis• Second Order System and Phase Plane• Describing Function Analysis• Appendices• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 550 Approx.ISBN : 81-88458-24-4

Price Rs. : 315/-Nineth Edition : 2012

NETWORKANALYSIS AND

SYNTHESIS

CONTENTS :• Introduction• Signals and Waveform Synthesis• Graph Theory• Network Theorems• Two Port Networks• Network Functions• Stability and Responses• Network Synthesis• Filters

(Two Colour Edition)

By: K.M. Soni

• Appendix• Answers to Unsolved Problems• Bibliography• Index

CONTENTS :• Introduction to Circuit Elements• Magnetically Coupled Circuits• Transient Analysis of the Circuits• Phasor Algebra and AC Circuits• Resonance in R-L-C Circuits• Graph Theory• Network Theorems• Two-Port Networks• Network Functions• Laplace Transform and its Applications• Fourier Series

Size : 20 x 30/8Pages : 500 Approx.

ISBN : 978-93-5014-356-8

Price Rs. : 265/-Reprint : 2012

NETWORKANALYSIS

By: Dr. K.M. Soni

(RGTU)

• Fourier Transform and its Applications• Appendices• Answers to Unsolved Problems• Index

NETWORKTHEORY

By: K.M. Soni

CONTENTS :• Signals and Waveform Synthesis• Introduction to Network• Network Analysis by Classical Method• Laplace Transforms• Two-Port Networks• Network Functions• Network Synthesis• Transfer Function Synthesis• Introduction to Active Network Synthesis• Graph Theory• Appendices• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-81-906919-5-6

Price Rs. : 265/-Reprint : 2012

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS28

CONTENTS :• Signals and Waveform Synthesis• Introduction to Network• Network Analysis by Classical Method• Laplace Transforms• Two-Port Networks• Network Functions• Network Synthesis• Transfer Function Synthesis• Introduction to Active Network Synthesis• Appendix• Index

Size : 20 x 30/8Pages : 365 Approx.ISBN : 978-93-80027-83-8

Price Rs. : 250/-Reprint : 2012

FUNDAMENTALS OFNETWORK

ANALYSIS &SYNTHESIS

By: K.M. Soni

(For UPTU)

CONTENTS :• Signals• Systems• Analogous Systems• Fourier Series• Fourier Transform and its Application• Laplace Transform and its Applications• z-Transform and its Applications• State Variable Analysis• Appendices• Answers to Unsolved Problems• Index

Size : 20 x 26/8Pages : 400 Approx.ISBN : 81-88458-95-3

Price Rs. : 210/-Reprint : 2012

BASIC SYSTEMANALYSIS

By: K.M. Soni

CONTENTS :• Introduction to Circuit Elements• Signals and Waveform Synthesis• Network Theorems• Laplace Transform and Its Applications• Network Functions and Responses• Network Synthesis• Filter Synthesis• Appendices• IndexSize : 20 x 30/8

Pages : 325 Approx.

ISBN : 978-93-80027-67-8

Price Rs. : 195/-Second Edition : 2012

NETWORKANALYSIS &SYNTHESIS

By: Dr. K.M. Soni

CONTENTS :• Overview of an Embedded Systems• The Embedded Environment and

Programming Fundamentals• Embedded Hardware Building Blocks

and the Embedded Board• Embedded Hardware and Software

Development Environment• Architecture and Programming of 8051

Microcontrollers• Quality Matrix and Interfacing of

Microcontroller

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-019-2

Price Rs. : 210/-First Edition : 2010

EMBEDDEDSYSTEM &

MICROCONTROLLER

By: Manish VermaK.B. Singh

• Real Time Operating System• Programming Languages for Embedded

System• Model Test Papers• Examination Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 29

CONTENTS :• Introduction• Number Systems and Codes• Logic Gates• Boolean Algebra and Logic Simplification• Logic Families• Design of Combinational Logic Circuits• Arithmetic Circuits• Encoders, Decoders and Display

Devices• Multiplexers and Demultiplexers• Latches and Flip Flops• Waveform Generators• Counters

Size : 20 x 30/8Pages : 550 Approx.ISBN : 81-85749-60-4

Price Rs. : 275/-Reprint : 2012

DIGITALELECTRONICS

By: Dr. B.R. GuptaV. Singhal

• Shift Registers• Analysis and Design of Sequential Logic

Circuits• Memories• Programmable Logic Devices• A/D and D/A Converters• Arithmetic Logic Unit• Introduction to Microprocessors• Digital Systems• Experimental Work• Appendices• Bibliography• Index

CONTENTS :• Sound Waves• Radio Waves• Modulation and Demodulation• Amplifiers• Microphones• Loudspeakers• Public Address Systems• Magnetic Sound Recording• Tape Recorder• Audio Compact Disc Systems• High Fidelity Audio Systems

Size : 20 x 26/8Pages : 400 Approx.

ISBN : 978-93-5014-407-7

Price Rs. : 250/-Sixth Edition : 2013

CONSUMERELECTRONICS

By: B.R. GuptaV. Singhal

• Stereo Sound Systems• Monochrome Television• Colour Television• Cable Television• Video Cassette Recorder• Miscellaneous Devices• Trouble Shooting and Repair• Experimental Work• Appendices• Index

POWERELECTRONICS

By: Dr. B.R. GuptaV. Singhal

CONTENTS :• Power Diodes and Transistors• Thyristors• Controlled Rectifiers• Inverters• Choppers• AC Regulators• Cycloconverters• Applications of Thyristors• DC and AC Motor Drives• Power Supplies• Harmonics• Integrated Circuits and Operational

Amplifiers

• Number Systems• Logic Gates and Boolean Algebra• Digital Electronic Circuits• Microprocessors• Experimental Work• Appendices• Bibliography• Index

CONTENTS :• Power Semiconductor Devices,

Symbols and Static Characteristics• Power Semiconductor Devices,

Symbols and Static Characteristics• DC-DC Converters• Phase Controlled Converters• AC Voltage Controllers• Cycloconverters• InvertersSize : 20 x 30/8

Pages : 350 Approx.ISBN : 978-93-5014-107-6

Price Rs. : 240/-First Edition : 2011

POWERELECTRONICS

By: Dr. B.R. GuptaVandana Singhal

(For UPTU)

• Experimental Work• Appendices• Bibliography• Index

Size : 20 x 30/8Pages : 600 Approx.ISBN : 81-85749-53-1

Price Rs. : 295/-Reprint : 2013

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS30

CONTENTS :• Thyristors Principles and Characteristics• Phase Controlled Rectifiers• Inverters• Choppers• Cycloconverters• Control of DC Drives• Control of AC Drives• Appendices• IndexSize : 20 x 30/8

Pages : 300 Approx.ISBN : 978-93-5014-119-9

Price Rs. : 195/-Reprint : 2013

INTRODUCTION TOELECTRIC

DRIVES

By: Dr. B.R. GuptaVandana Singhal

CONTENTS :• Electrical and Electronic Materials

and Components• Physical Electronics, Electronic

Devices and ICs• Signals and Systems• Network Theory• Electromagnetic Theory• Electrical and Electronic Instruments• Analog Electronic Circuits• Power Electronics• Digital Electronics

Size : 23 x 36/8Pages : 700 Approx.ISBN : 978-93-5014-225-7

81-88458-02-3

Price Rs. : 375/-Third Edition : 2012

QUESTION BANK INELECTRONICS &

COMMUNICATIONENGINEERING

(More than 12,000 Objective TypeQuestions with Answers) For Degree,

Diploma, AMIE Students & OtherCompetitive Examinations

• Control Systems• Microprocessors and Computers• Communication Systems• Microwave Engineering

CONTENTS :• Thyristors• Heat Sinks• Applications of Thyristors• Controlled Rectifiers• AC Phase Control• Applications of Phase Controlled

Rectification and AC Phase ControlCircuits

• Inverters• Induction and Dielectric Heating

Size : 20 x 26/8Pages : 325 Approx.ISBN : 978-93-5014-346-9

81-88458-84-8

Price Rs. : 125/-Reprint : 2012

INDUSTRIALELECTRONICS

andINSTRUMENTATION

By: Sunil Kumar

• Introduction to Instrumentation• Transducers• Signal Conditioners• Output Devices and Displays• Subject Review Questions• Solutions to Numerical Problems• Experiments• Previous Examination Question Papers• Index

By : Dr. B.R. GuptaVandana Singhal

CONTENTS :• Fundamentals of Electric Drives• Control of Electric Drives• Dynamics of Electric Drives• Selection of Motor Power Rating• DC Motor Drives• AC Motor Drives• Appendices• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-381-0

Price Rs. : 185/-First Edition : 2013

FUNDAMENTALS OFELECTRIC

DRIVES ANDCONTROL

By: Dr. B.R. GuptaVandana Singhal

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 31

CONTENTS :• Introduction• Orbital Mechanism and Launching

of Satellite• Satellite Subsystems• Satellite Channel and Link Design• Propagation Effects and their Impact on

Satellite Earth Links• Earth Station Technology• Introduction to Various Satellite Systems• Satellite Applications• Global Mobile Satellite Systems• Appendices

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-5014-169-4

81-89757-80-6

Price Rs. : 225/-Reprint : 2013

SATELLITECOMMUNICATION

By: Sapna Katiyar

CONTENTS :• Overview of Satellite Systems• Orbits and Launching Method• The Geostationary Orbit• Space Segment• Earth Segment• Space Link• Satellite Access• Direct Broadcast Satellite Services• Satellite Services• Appendices• Short Answer Questions

Size : 20 x 26/8Pages : 325 Approx.ISBN : 978-93-5014-342-1

Price Rs. : 225/-First Edition : 2012

INTRODUCTION TOSATELLITE

COMMUNICATION

By: Sapna Katiyar

• Short Answer Questions• Glossary• Model Test Papers• Examination Papers• Index

OPTICALFIBER

COMMUNICATION

By: Sapna Katiyar

Size : 20 x 26/8Pages : 500 Approx.

ISBN : 978-93-80027-81-4

Price Rs. : 250/-Reprint : 2012

CONTENTS :• Introduction to Optical Fiber

Communication• Optical Fiber Waveguides• Transmission Characteristics of

Optical Fibers• Optical Sources 1 : The Laser• Optical Sources 2 : The Light

Emitting Diode• Optical Detectors• Direct Detection Receiver

Performance Considerations• Optical Fiber Communication Systems

• Coherent Optical Fiber Systems• Appendices• Glossary• Objective Type Questions with

Answers• Model Test Papers• Previous Years Examination Papers• Index

CONTENTS :• Telephone Systems• Facsimile• Television• Radar System• Mobile Communication• Satellite Communication• Fiber Optic Communications• Appendix: Objective Type Questions• Examination Papers• Index

Size : 20 x 26/8Pages : 450 Approx.ISBN : 978-93-80027-21-0

Price Rs. : 230/-Reprint : 2011

ADVANCEDCOMMUNICATION

SYSTEM

By: Sapna Katiyar

• Objective Type Questions• Glossary• Model Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS32

CONTENTS :• Evolution of Switching System• Introduction to Switching System• Electronic Switching System• Digital Switching• Space Division Switching• Time Division Switching• Teletraffic Engineering• Control of Switching Systems• Signalling• Packed Switching• Asynchronous Transfer Mode (ATM)

Network

ELECTRONICSWITCHING

By: Sapna Katiyar

• Appendices• Glossary• Objective Type Questions• Model Test Papers• Examination Papers• Index

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-81-89757-68-7

Price Rs. : 240/-Reprint : 2013

• Glossary• Objective Type Questions• Index

CONTENTS :• Evolution of Switching System• Electronic Switching System• Telecommunication Transmission

and Multiplexing• Digital Switching• Telecom Traffic Engineering• Network Synchronization

Control and Management• Digital Subscriber Access• DSL Technology• Appendices

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-242-4

Price Rs. : 220/-First Edition: 2012

TELECOMMUNICATIONSWITCHING SYSTEMS

By: Sapna Katiyar

CONTENTS :• Introduction• Orbital Aspects of Satellite

Communication• Communication Satellite Link Design• Satellite Subsystems• Earth Station Technology• Satellite Analog and Digital

Communication• Multiple Access Techniques• Laser and Satellite Communication• Satellite Applications• Appendices

By: Sapna Katiyar

• Short Answer Questions• Glossary• Model Question Papers• Examination Papers• Index

SATELLITECOMMUNICATION

(For PTU)

OPTICALCOMMUNICATION

CONTENTS :• Introduction• Optical Fibers• Optical Fibers Materials and Fabrication

Techniques• Signal Degradation in Optical Fibers• Optical Sources : Light Emitting Diode

and Laser• Optical Detectors• Optical Fiber Communication Systems• Fiber Optic Measurement Techniques• Coherent Optical Fiber Communication• Optical Amplifiers

By: Sapna Katiyar

• Appendices• Glossary• Objective Type Questions with Answers• Model Question Papers• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-024-6

Price Rs. : 265/-First Edition : 2010

(For RTU)

Size : 20 x 26/8Pages : 375 Approx.ISBN : 978-93-80027-08-1

Price Rs. : 195/-Reprint : 2011

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 33

Fundamentals ofOPTICAL FIBER

COMMUNICATION

By: Sapna Katiyar

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-011-6

Price Rs. : 250/-Reprint : 2013

(PTU)

CONTENTS :• Introduction• Optical Fibers• Dispersion Effect• Optical Fiber Losses• Nonlinear Optical Effects• Optical Fibers : Manufacturing, Cables

and Connectors• Optical Transmitters• Optical Sources : Light Emitting Diode

and Laser• Optical Receivers• Optical Detectors

• Light Wave Systems• Multichannel Systems• Appendices• Glossary• Objective Type Questions• Model Question Papers• Examination Papers• Index

Size : 20 x 26/8Pages : 500 Approx.ISBN : 978-93-80027-81-4

Price Rs. : 250/-Fourth Edition : 2012

By: Sapna Katiyar

CONTENTS :• Introduction to Optical Communication• Optical Fiber Waveguides• Optical Fibers Materials and Fabrication

Techniques• Transmission Characteristics of Optical

Fibers• Optical Fiber : Connectors, Joints,

Couplers, Isolators and MeasurementTechniques

• Optical Sources 1 : The Laser• Optical Sources 2 : The Light

Emitting Diode

• Power Launching and Coupling• Optical Detectors• Optical Receiver• Link Design and Multichannel Systems• Appendices• Glossary• Objective Type Questions with Answers• Model Test Papers• Previous Year Examination Paper• Index

Size : 20 x 26/8Pages : 425 Approx.ISBN :

Price Rs. : 225First Edition : 2011

INTRODUCTION TOOPTICAL

COMMUNICATION

CONTENTS :• Introduction• Propagation in Dielectric Waveguides• Attenuation Mechanism in Optical Fibers• Wave Propagation• Optical Sources• Optical Detectors• Optical Fiber Communication System• Advanced Multiplexing Strategies• Appendices

• Glossary• Objective Type Questions with

Answers• Model Test Papers• Index

TELECOMMUNICATIONNETWORKS

By: Sapna Katiyar

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-234-9

Price Rs. : 265/-First Edition : 2012

CONTENTS :• Introduction• Evolution of Basic Switching System• Control of Switching System• Error Detection and Correction Codes• Multiplexing Techniques• Space Division Switching• Time Division Switching• Teletraffic Engineering• Telecommunication Transmission and

Subscriber Loops• Signalling

• Satellite Communication• Satellite Applications• Glossary• Objective Type Questions• Index

OPTICALCOMMUNICATION

By: Sapna Katiyar

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS34

CONTENTS :• Introduction• Optical Fibers• Fiber Characteristics• Fiber Couplers and Connectors• Led Light Source• Laser Light Source• Avalanche and Pin Photodetectors• Optical Fibers Materials and Fabrication

Techniques• Appendices

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-365-0

Price Rs. : 240/-Reprint : 2012

OPTICALCOMMUNICATION

SYSTEMS

By: Sapna Katiyar

• Glossary• Objective Type Questions

with Answers• Model Question Paper• Index

VLSI

Size : 20 x 26/8Pages : 450 Approx.ISBN : 81-88458-17-1

Price Rs. : 195/-Reprint : 2012

CONTENTS :• Introduction to VLSI Technology• Film Deposition• Epitaxy Process• Diffusion Process• Ion Implantation• Lithography• Photoresist and Etching• MOSFET and MOS Fabrication

Technology• Simulation Process (IC Fabrication Steps)

By: Dr. R.K. Singh

(Technology, Design &Basics of Microelectronics)

• Bipolar IC Technology• Appendices• Examination Paper• Index

CONTENTS :• 8051 Microcontroller• Introduction to 8051 Assembly

Programming• Jump, Loop and Call Instructions• Input Output Port Programming• Addressing Modes• Arithmetic Instructions and Programs• Logic Instructions and Programs• Single Bit Instructions and Programming• Counter/Timer Programming in the

8051• Introduction to 8051 Assembly

Programming• Interrupts• Real-World Interfacing• Real-world Interfacing Steeper Motor,

Keyboard and Sensors

Size : 20 x 30/8Pages : 500 Approx.ISBN : 81-89757-12-1

Price Rs. : 225/-Reprint : 2013

8051MICROCONTROLLER

AND EMBEDDEDSYSTEMS

CONTENTS :• Introduction to Integrated Circuits• VLSI Components, Integration and

Bipolar Technology• Review of MOSFET, IGFET and MOS

Fabrication Technology• MOS-Basic Circuits• Combinational Circuit and PLA

Programmable Logic Devices• Sequential Circuits Networks• Testing

Size : 20 x 30/8Pages : 500 Approx.ISBN : 81-88458-33-3

Price Rs. : 250/-Reprint : 2012

VLSI DESIGNWITH VHDL

(Analog & Digital)

By: R.K. Singh

By: Sampath K. Venkatesh

• Real-World Interfacing ADC/DAC• Introduction to Embedded Systems (ES)

and its Design• External Memory Interfacing with 8051• PIC and AVR Microcontroller• Interfacing Devices• Advanced Processors• Hardware Fundamentals for Embedded

Developers• Appendix• 8051 Programs• Model Test Papers (Solved)• Model Test Papers (Unsolved)• Index

• Introduction to VHDL• Experiments• Appendix• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 35

By: Sampath K. Venkatesh

8051MICROCONTROLLER

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-128-1

Price Rs. : 240/-Reprint : 2012

CONTENTS :• 8051 Microcontroller• Introduction to 8051 Assembly

Programming• Jump, Loop and Call Instructions• IO Port Programming• Addressing Modes• Arithmetic Instructions and Programs• Logic Instruction and Programs• Single Bit Instructions and Programming• Counter/Timer Programming• The 8051 Serial Port• Interrupts• Real-World Interfacing• Real-World Interfacing Steeper Motor,

Keyboard and Sensors

• Real-World Interfacing ADC/DAC• External Memory Interfacing with 8051• Interfacing Devices• Hardware Fundamentals for Embedded

Developers• 8051 Programs• Appendices

Appendix-AAppendix-BAppendix-CAppendix-D

• Model Questions Papers• Previous Years Question Papers• Index

DIGITALCIRCUIT SYSTEM

Using VHDL

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-80027-03-6

Price Rs. : 175/-Reprint : 2013

CONTENTS :• Introduction to VHDL• VHDL Statements• Combinational and Sequential

Circuit Design• Design of Micro Computer and

Programmable Device• VHDL Program for Lab• Question Bank• Model Question Paper• Index

By: Shipra GuptaNeelu Chaudhary

DIGITAL CIRCUITSand

SYSTEMS

Size : 20 x 26/8Pages : 230 Approx.ISBN : 978-93-5014-339-1

Price Rs. : 175/-First Edition : 2012

CONTENTS :• Basics of Digital Electronics• Combinational Circuits• Logic Families• Designing of Sequential Circuits• A/D and D/A Converter• Index

By: Shipra Gupta

(RGTU)

Size : 20 x 26/8Pages : 625 Approx.ISBN : 978-93-5014-066-6

Price Rs. : 285/-Fourth Edition : 2012

DIGITALLOGIC &DESIGN

CONTENTS :• Fundamental of Digital Techniques• Logic Simplification• Combinational Logic Circuits and its Design• Sequential Logic Circuits and its Design• Digital Logic Families• D/A and A/D Converters (Data Converters)• Programmable Logic Devices• Sequential Logic Design• Experiments• University Question Papers• Index

By: Pratima ManhasShaveta Thakral

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS36

DIGITALELECTRONICS

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-044-4

Price Rs. : 175/-First Edition : 2010-11

CONTENTS :• Introduction• Number Systems• Codes and Parity• Logic Gates• Logic Simplification• Arithmetic Circuits• Multiplexer/Demultiplexer• Decoder Display Devices and

Associated Circuits• Encoders and Comparators• Latches and Flip-Flops• Counter

• Shift Register• Logic Families• Experiments• Previous Years Question Papers• Index

(For Polytechnics)

By: Pratima ManhasShaveta Thakral

CONTENTS :• Review of Mos Technology• Combinational Mos Logic Circuits• Circuit Characterisation and

Performance Estimation• Sequential Memory (MOS) Circuits• Index

Size : 20 x 30/8Pages : 315 Approx.ISBN : 978-93-5014-179-3

Price Rs. : 240/-First Edition : 2011-12

VLSIDESIGN

By: Pratima ManhasShaveta Thakral

CONTENTS :• Review of Mos Technology• Mos Transistor Theory• Mos Circuits and Logic Design• Circuit Characterization and

Performance Estimation• VLSI Fabrication• Design Examples Using CMOS• Sequential (Memory Mos Circuits)• Semiconductor Memories• Design of Combinational Elements &

Regular Array Logic

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-253-0

Price Rs. : 265/-Reprint : 2013

VLSIDESIGN

By: Pratima ManhasShaveta Thakral

CONTENTS :Unit-I: The 8085 Processor• Introduction to Microprocessors• Microprocessor 8085Unit-II: The 8086 MicroprocessorArchitecture• Microprocessor 8086Unit-III: Instruction Set of 8086• Instruction set of Microprocessor 8086Unit-IV: Interfacing Device• Interrupt Structure of 8086Unit-V: DMA• DMA Controller 8237AUnit-VI: Interrupt and Timer• Programmable Interrupt Controller

8259A

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-141-0

Price Rs. : 240/-Second Edition : 2012

• Programmable Interval Timer/Counter8254

• Programmable Peripheral Interface8255A

• Interfacing with Applications• Programs for 8085 Microprocessor• Appendices• Examination Papers• Index

INTRODUCTION TOMICROPROCESSORS

ANDINTERFACING WITH

APPLICATIONS

By: Ashutosh GuptaNeeraj Gupta

• VHDL Programming• Previous Years Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 37

CONTENTS :• Electromagnetic Theory

(Vector Analysis)• Electrostatic Fields• Magnetostatic Fields• Time Varying Fields : Maxwell’s

Equations and Boundary Conditions• Electromagnetic Waves• Transmission Lines• Guided Waves• Waveguides• Resonators

Size : 20 x 26/8Pages : 600 Approx.ISBN : 81-88458-45-7

Price Rs. : 195/-Reprint : 2012

ELECTROMAGNETICFIELDS & WAVES

By: R. Gowri

• Electromagnetic Radiations• Electromagnetic Interference and

Electromagnetic Compatibility• Objective Type Questions• Appendices• Index

Size : 20 x 26/8Pages : 330 Approx.ISBN : 978-93-5014-033-8

Price Rs. : 210/-Reprint : 2012

WIRELESSCOMMUNICATION

CONTENTS :• Repair, Servicing and Maintenance

Concepts• Troubleshooting Procedures• Troubleshooting Techniques• Testing Passive Components• Testing Semiconductor Devices• Troubleshooting of Digital Systems• Troubleshooting of Various Electronic

Equipments• Log Book and History Sheet• Appendix (Hand-Tools)• Index

Size : 20 x 26/8Pages : 200 Approx.ISBN : 81-88458-63-5

Price Rs. : 135/-Reprint : 2012

TROUBLESHOOTING &

MAINTENANCEOF ELECTRONIC

EQUIPMENTS

By: K. Sudeep Singh

By: Aman KundraAmita Sandhu

CONTENTS :• Introduction• Basics of Wireless Systems and

Networks• Digital Communication Through Fading

Multipath Channels• Multiple Access Techniques for Wireless

Communications• Wireless Networking• Wireless Systems and Standards• Wireless Local Area Networks (WLAN)

• Future Trends• Appendices• Previous Years Examination Papers• Index

FUNDAMENTALS OFTELEVISION and

RADARENGINEERING

Size : 20 x 26/8Pages : 600 Approx.ISBN : 978-93-80027-54-8

Price Rs. : 310/-Reprint : 2013

CONTENTS :Part-I: Television Engineering• Introduction to Television• Basic Principles of Television Engineering• TV Camera Tubes• Monochrome Television Transmitters

and Receivers• Essential of Colour Television• Colour Television Systems• Television Display Systems• Television ApplicationsPart-II: Radar Engineering• Introduction to Radar

• CW and Frequency Modulated Radar• MTI and Pulse Doppler Radar• Radar Transmitter and Receiver• Radio Direction Finder• Range Systems• Hyperbolic Electronic Navigational

Systems• DME and TACAN• Electronics Aids to Approach and

Landing System• Tracking Radar• Question Bank• Index

By: K.K. Sharma

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS38

CONTENTS :• Principles of Satellite Communication• Communication Satellite Link Design• Analog Satellite Communication• Digital Satellite Communication• Multiple Access Techniques• Satellite Orbits• Special Purpose Communication Satellite• Laser Satellite Communication• Question Bank

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-127-4

Price Rs. : 195/-Third Edition : 2012

FUNDAMENTALS OFSATELLITE

COMMUNICATIONENGINEERING

By: K.K. Sharma

• Glossary• Previous Years Examination Papers• Index

(With Guidance)

CONTENTS :Part-I: Fundamentals of Radar and SonarEngineering• An Introduction to Radar• The Radar Equation• CW and Frequency Modulated Radar• MTI and Pulse Doppler Radar• Tracking Radar• Radar Transmitter• Radar Receiver and Duplexers• Radar Display Units• Radar Antennas• Detection of Radar Signal in Noise• Radiation Hazard• Electronic Counter Measures and Electronic

Counter-Counter Measures• Extraction of Information from Radar Signals• Radar Signal Models

• Radar WaveformsPart-II: Fundamentals of Navigation andGuidance Engineering• Navigation• Radio Direction Finders (RDF)• Radio Ranges• Hyperbolic Electronic Navigational Systems• DME and TACAN• Electronics Aids to Approach and

Landing System• Navigation Satellite• Guidance• Appendix• Glossary• References• Examination Papers• Index

Size : 20 x 26/8Pages : 650 Approx.ISBN : 81-88458-71-6

Price Rs. : 295/-Reprint : 2013

FUNDAMENTALS OFRADAR, SONAR

and NAVIGATIONENGINEERING

By: K.K. Sharma

CONTENTS :Unit-I: Basic Telephony• Introduction to Basic Telephony• Telephone Circuit

Unit-II: Public Telephone Network andTraffic Analysis• Public Telephone Network• Traffic Analysis

Unit-III: Digital Telephony• Digital Telephony

Unit-IV: Digital Transmission• Digital Transmission

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-93-5014-073-4

Price Rs. : 195/-Second Edition : 2011

FUNDAMENTALS OFVOICE

COMMUNICATIONENGINEERING

By: K.K. Sharma

Unit-V: Digital Switching• Digital Switching• Glossary• Model Text Paper• Examination Papers• Index

CONTENTS :Unit-I:• Telephone Instruments and Signals• Telephone CircuitsUnit-II:• Public Telephone NetworksUnit-III:• Multiplexing of Telephone ChannelsUnit-IV:• Introduction to Data Communication• Interface Standards• Transmission Media

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-5014-333-9

Price Rs. : 265/-First Edition : 2012

FUNDAMENTALS OFVOICE AND

DATACOMMUNICATION

By: K.K. Sharma

Unit-V:• Error Detection and Correction• Switching• Glossary• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 39

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-192-2

Price Rs. : 210/-Second Edition : 2012

FUNDAMENTALS OFDATA

COMMUNICATION

By: K.K. Sharma

CONTENTS :• Digital Communication• Digital Modulation• Data Communication• Data Communication Hardwares

Devices• The Telephone Networks• Data Communication Protocols• Network Configurations• Integrated Service Digital Network

(ISDN)

• Multiplexing• Internet and TCP/IP• Model Test Paper• Examination Papers• Index

FUNDAMENTALS OFRADAR &SONAR

ENGINEERING

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-287-5

Price Rs. : 165/-First Edition : 2012

By: K.K. Sharma

CONTENTS :• Introduction to Radar• Radar Equation• CW and Frequency Modulated Radar• MTI and Pulse Doppler Radar• Tracking Radar• Radar Receivers and Duplexers• Radar Displays• Introduction to Sonar• Appendices• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 405 Approx.ISBN : 978-93-5014-147-2

Price Rs. : 265/-Reprint : 2012

DIGITAL ANDANALOG

COMMUNICATION

CONTENTS :• Introduction to Communication• Theoretical Basis for Data Communication• Modulation• Data Encoding• Transmission MediaCommunication and Transmission Modes• Flow Control• Network Switching Systems• Telephone SystemsTransmission Errors• Cryptography• Examination Papers• IndexBy: K.K. Sharma

Size : 20 x 26/8Pages : 244 Approx.ISBN : 978-93-5014-261-5

Price Rs. : 175/-Reprint : 2013

INTRODUCTION TORADAR

SYSTEMS

CONTENTS :• Introduction to Radar• The Radar Equation• MTI and Rules Doppler Radar• Tracking Radar• Detection of Signals in Noise• Information from Radar Signals• Appendices• Index

By: K.K. Sharma

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS40

CONTENTS :Unit-I:• Data and SignalsUnit-II:• Data Communication Concepts• Line CodesUnit-III:• Telephone Networks• Multiplexing• Digital Hierarchy (PDH and SDH)Size : 20 x 30/8

Pages : 350 Approx.ISBN :

Price Rs. : 250/-First Edition : 2011

DATACOMMUNICATION

CONTENTS :Unit-I:• Introduction to Data Communication• Data EncodingUnit-II:• Multiplexing• Spread Spectrum• Switched Communication NetworksUnit-III:• Physical Layer Interface Devices• Standard Connecting Devices

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 250/-First Edition : 2011

ELEMENTS OFDATA

COMMUNICATION

By: K.K. Sharma

By: K.K. Sharma

Unit-IV:• Transmission Media• Telephone NetworkUnit-V:• Transmission Errors• Examination Papers• Index

Unit-IV:• Switching Techniques• Transmission Error• Integrated Services Digital Network• Transmission Media• Appendix• Index

By: Deepak GargSize : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-299-8

Price Rs. : 240/-First Edition : 2013

VLSIDESIGN

CONTENTS :• MOS Transistors• MOSFET Fabrication• MOS Inverters• Combinational MOS Logic Circuits• Dynamic Logic Circuits• Clocking Strategies for CMOS Logic

Circuits• Semiconductor Memories• VLSI Design Methodologies

• Appendix• Examination Papers• Index

(I.P)

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-283-7

Price Rs. : 235/-Second Edition : 2012

VLSIDESIGN

By: Deepak Garg

CONTENTS :• VLSI Design Methodologies• MOSFET Fabrication• MOS Circuit Design Processes• MOS Transistor• MOS Inverters• Combinational MOS Logic Circuits• Sequential MOS Logic Circuits• Dynamic Logic Circuits• Semiconductor Memories• Low-Power CMOS Logic Circuits• CMOS Testing• Appendix Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 41

CONTENTS :• Review of MOS Transistor• Mosfet Fabrication• MOS Circuit Design Processes• MOS Inverters• Power Consumption for CMOS Circuits• Combinational MOS Logic Circuits• Dynamic Logic Circuits• Sequential MOS Logic Circuits• Semiconductor Memories

VLSICIRCUITDESIGN

By: Deepak Garg

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-252-3

Price Rs. : 235/-Second Edition : 2013

By: A.K. Gautam

CONTENTS :• Electromagnetic Field Radiation• Antenna Terminology• Antenna Arrays• Practical Antennas• Propagation• Antenna Measurements• Multiple Choice Questions• Appendices• Previous Years Question Papers• Index

ANTENNAand

WAVEPROPAGATION

Size : 20 x 30/8Pages : 530 Approx.ISBN : 81-88458-04-X

Price Rs. : 265/-Reprint : 2012

• CMOS Testing• Appendix• Papers• Index

CONTENTS :• VLSI Design Methodologies• Basic Circuits for Digital System• Specification of Sequential Machine• Asynchronous Sequential Machine• State Machines• Fault Detection of Combinational

Circuits• Semiconductor Memories• Model Paper• Index

Introduction toVLSI

CIRCUITSAND

SYSTEMS

By: Deepak Garg

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-410-7

Price Rs. : 230/-First Edition : 2013

DIGITALELECTRONICS

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-338-4

Price Rs. : 185/-First Edition: 2012

By: Preeti Sehrawat

CONTENTS :Unit-I: Fundamental of Digital Techniques• Fundamental of Digital Techniques

Unit-II: Combinational Design UsingGates• Combinational Design using Gates

Unit-III: Combinational Design Using MSIDevices• Combinational Design using MSI Devices

Unit-IV: Sequential Circuits• Sequential Circuits

Unit-V: Digital Logic Families• Digital Logic Families

Unit-VI: A/D Converter and D/AConverter• A/D Converter and D/A Converter

Unit-VII: Programmable Logic Devices• Programmable Logic Devices

Unit-VIII: Sequential Logic Design• Sequential Logic Design• Experiments• Papers• Question Bank• Model Test Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS42

CONTENTS :Unit-I:• Introduction• Microwave WaveguideUnit-II:• Microwave Components and Elements• Microwave TubesUnit-III:• Microwave Solid-State DevicesUnit-IV:• Microwave Measurements• Radar Systems

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-397-1

Price Rs. : 225/-Sixth Edition : 2013

MICROWAVEENGINEERING

• Experiments• Model Question Paper• Index

Size : 20 x 26/8Pages : 500 Approx.ISBN : 978-93-5014-151-9

81-88458-18-X

Price Rs. : 250/-Reprint : 2012

MICROWAVEand

RADARENGINEERING

CONTENTS :• Introduction• Basic Transmission Line Theory• Microwave Waveguide• Microwave Cavity Resonators and

Components• Microwave Measurements• Microwave Tubes• Microwave Semiconductor Devices• Microwave Radiation Hazards• Microwave Communication Systems• Radar Systems

• Satellite Communication• Experiments• Previous Year Question Papers• Index

By: Dr. A.K. Gautam

By: A.K. Gautam

CONTENTS :• Electromagnetic Field Radiation• Antenna Terminology• Antenna Arrays• Practical Antennas• Propagation• Television System• Multiple Choice Questions• Appendices• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-154-0

Price Rs. : 265/-Second Edition : 2012

ANTENNA WAVEPROPAGATION

AND TVENGINEERING

By: Dr. A.K. Gautam

CONTENTS :• Introduction• Amplitude Modulation• Frequency and Phase Modulation

(Angle Modulation)• Principles of AM Modulators• Principles of FM Modulators• Demodulation of AM Waves• Demodulation of FM Waves• Pulse Modulation Systems• Digital Pulse Modulation• Experiments

Size : 20 x 26/8Pages : 300 Approx.ISBN : 81-85749-11-6

Price Rs. : 140/-Reprint : 2012

PRINCIPLES OFCOMMUNICATION

ENGINEERING

• Short Questions Answers• Model Paper• Examination Papers• Index

By: A.K. Gautam

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 43

CONTROLSYSTEMS

By: S. Hasan Saeed

Size : 20 x 30/8Pages : 575 Approx.ISBN : 81-88458-03-1

Price Rs. : 295/-Reprint : 2012

CONTENTS :• The Control System• Time Response Analysis• Steady State Error Constant• Frequency Domain Analysis• Stability Theory• Compensation Techniques• State Space Analysis of Control System• Control System Components• Basic Control Actions and Controller

Characteristics• Miscellaneous Problems• Matlab Programs

• Model Test Papers• Previous Years Question Papers with

Solutions• References• Index

CONTENTS :• Input-Output Relationship• Time Domain Analysis• Error Analysis• Frequency Domain Analysis• Stability Theory• Compensation Techniques• Non-Linear System Analysis• State Space Analysis of Control Systems• Control System Components• The Laplace Transforms• Basic Control Actions and Controller

Characteristics

• Miscellaneous Problems• MATLAB Programs• Objective Type Questions• Model Test Papers• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 700 Approx.ISBN : 978-81-906919-2-5

Price Rs. : 340/-Reprint : 2013

AUTOMATICCONTROLSYSTEMS

By: S. Hasan Saeed

(with MATLAB Programs)Two Colour Edition

CONTENTS :• Digital and Data Communication• Coding• Digital Modulation Techniques• Data Transmission Circuits• UART and USART• Modem• Network and Control Consideration• Telemetry• Radio Paging Systems: Concept and

Applications• Electronic Exchange• Cellular Mobile Telephone Systems

• Facsimile• Carrier Telephony• Fiber Optic Communication• Examination Papers• Index

Size : 20 x 26/8Pages : 300 Approx.

Price Rs. : 150/-Reprint : 2012

COMMUNICATIONSYSTEMS-II

By: A.K. Gautam

COMMUNICATIONSYSTEMS-I

Size : 20 x 26/8Pages : 275 Approx.ISBN : 81-88458-85-6

Price Rs. : 130/-Reprint : 2012

CONTENTS :• AM/FM Transmitters• AM/FM Receivers• Antenna• Propagation• Fiber Optic Communications• Satellite Communication• Experiments• Short Questions Answers• Model Paper• Examination Papers• IndexBy: A.K. Gautam

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS44

Size : 20 x 30/8Pages : 350 Approx.ISBN :

Price Rs. : 225/-First Edition : 2013

ElectromagneticField Theory

By: S. Hasan Saeed

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. : 250/-First Edition : 2013

BASICSYSTEM

ANALYSIS

By: S. Hasan SaeedSazan Arif Khan

Size : 20 x 26/8Pages : 475 Approx.ISBN : 81-89757-16-4

Price Rs. : 250/-Reprint : 2012

WIRELESSCOMMUNICATION

SYSTEMS

CONTENTS :• Introduction to Wireless Communication

Systems• Modern Wireless Communication

Systems• Introduction to Cellular Mobile Systems• Cellular System Design Fundamentals• Multiple Access Techniques for Wireless

Communication• Wireless Networking• Intelligent Cell Concept and Application• Appendices

By: Brijesh Verma

• Solutions to Selected NumericalProblems

• Model Question Paper• Solutions to Model Question Paper-1• Solved Examination Paper• References• Index

CONTROLSYSTEMS-I

By: S. Hasan Saeed

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-133-5

Price Rs. : 295/-Seventh Revised Edition : 2012

CONTENTS :• Input-Output Relationship• Time Domain Analysis• Error Analysis• Frequency Domain Analysis• Stability Theory• State Space Analysis of Control System• The Laplace Transforms• Miscellaneous Problems

• MATLAB Programs• Model Question Papers• References• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 45

ATMNETWORKS

By: Brijesh Verma

CONTENTS :• Introduction to ATM• ATM Network• ATM Traffic Management• Signalling• ATM Protocol and Signalling• ATM System Design and

Implementation• ATM and B-ISDN• ATM Miscellaneous• Glossary• Acronyms• Index

MOBILECOMMUNICATION

By: Brijesh Verma

CONTENTS :• Introduction to Cellular Mobile

Systems• Elements of Cellular Radio Systems

Design and Interference• Cell Coverage for Signal and

Antenna Structure• Frequency Management & Channel

Assignment, Handoff & DroppedCalls

• Modulation Methods and Coding forError Detection and Correction

• Multiple Access Techniques• Second Generation, Digital and

Wireless Systems• Appendices• Previous Years Examination Papers• References• Index

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-80027-09-8

Price Rs. : 230/-Second Edition : 2012

Size : 20 x 30/8Pages : 460 Approx.ISBN : 978-93-5014-053-6

Price Rs. : 265/-First Edition : 2010

ADVANCEDCOMMUNICATION

SYSTEMS

By: Brijesh VermaPragyan Verma

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-243-1

Price Rs. : 235/-Reprint : 2013

CONTENTS :• Channel Coding• Speech Coding• Orthogonal Frequency Division

Multiplexing (OFDM)• Multi-Antenna System• Global System for Mobile

Communication• IS-95 and Code Division Multiple

Access• Wide Band Code Division Multiple

Access

• Statistics of Cellular System• New Concepts• Appendix : Numerics• Glossary• Index

CONTENTS :• Communication System Components• Data Transmission System• Standard in Data Communications• Security in Data Communications• Appendices• References• Paper• Index

DIGITALand ANALOG

COMMUNICATION

By: Brijesh Verma

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-81-89757-66-3

Price Rs. : 250/-Third Edition : 2011

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS46

CONTENTS :• Basic Concepts and Electronic

Components• Semiconductor Physics• Semiconductor Diode and Special

Diodes• Bipolar Transistors• Transistors Biasing and Stabilization of

Operating Point• Single Stage Transistors Amplifiers and

h-Parameters• Field Effect Transistors• Constant Voltage and Current Sources

• Vacuum and Gas Tubes• Regulated D.C. Power Supply• Short Questions with Answers• Solved Question Papers• Experiments• Appendices• Index

Size : 20 x 26/8Pages : 400 Approx.ISBN :

Price Rs. : 120/-Reprint : 2010

ELECTRONICDEVICES

&CIRCUITS-I

By: M.L. Anand

Vol. I

TELEMETRYand DATA

TRANSMISSION

By: R.N. Baral

CONTENTS :• Telemetry• Digital Modulation Techniques• Error Control Coding• Data Handling Systems• Digital Data Transmission and Processing• Remote Control Systems• Data Reception System• Command and Tracking Systems• Aerospace Telemetry• Telecontrol Principles

• References• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 81-88458-96-1

Price Rs. : 150/-Reprint : 2012

CONTENTS :• Multistage Transistor Amplifiers• Transistor Audio Power Amplifiers• Feedback in Amplifiers• Sinusoidal Oscillators• Tuned Voltage Amplifiers (Class C

Amplifiers)• Opto-Electronic Devices and their

Applications• Operational Amplifiers (Op-amps)• Wave Shaping Circuits• Multivibrators• Regulated Power Supply

Size : 20 x 26/8Pages : 325 Approx.ISBN : 978-93-5014-364-3

Price Rs. : 150/-Reprint : 2012

ELECTRONICDEVICES

&CIRCUITS-II

By: M.L. Anand

• Experiments• Appendices• Previous Years Question Papers with

Solution• Index

ELECTRICALENGINEERINGMATERIALS &ELECTRONIC

COMPONENTS

By: K.B. RainaS.K. Bhattacharya

T. Joneja

CONTENTS :• Classification of Materials• Conducting Materials• Semiconducting Materials• Insulating Materials• Dielectric Materials• Magnetic Materials• Material for Special Purposes• Electronic ComponentsSize : 20 x 26/8

Pages : 250 Approx.ISBN : 81-85749-84-1

Price Rs. : 125/-Reprint : 2012

• Printed Circuit Boards and SurfaceMounted Devices

• Integrated Circuits• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 47

TRANSDUCERSSENSORS and

DISPLAYSYSTEMS

By: Rakesh Kumar

CONTENTS :• Introduction to Transducers, Sensor

and Display Systems• Generalized Configurations and

Functional Descriptions of MeasuringInstruments

• Generalized PerformanceCharacteristics of Instruments

• Measurement of Displacement• Measurement of Force, Torque,

Shaft Power• Temperature Measurement• Pressure Measurement

• Flow Measurement• Level Measurement• Display Devices and Systems• Basic Electronics• Monitors and Recorders• Microprocessors and Computers in

Instrumentation• Appendices• Index

Size : 20 x 26/8Pages : 300 Approx.

ISBN : 978-81-89757-87-8

Price Rs. : 165/-Reprint : 2012

CONTENTS :• Basics of Measurements• Essentials of Analog Instruments• Galvanometers, Ammeters and

Voltmeters• Wattmeters & Energy Meters• Analog Multimeter (MM)• Electronic (DC and AC) Voltmeters• Cathode Ray Oscilloscope (CRO)• Signal Generators & Analysis Instruments• Impedance or AC Bridges and Q Meter• Introduction to Digital Electronics• Digital Instruments

Size : 20 x 26/8Pages : 350 Approx.ISBN : 81-88458-75-9

Price Rs. : 150/-Reprint : 2013

ELECTRONICINSTRUMENTS

&MEASUREMENTS

By: M.L. Anand

• Short Answer Questions• Experiments• Appendix• Solved Question Papers• Index

CONTENTS :• Introduction• Transducer-I• Transducer-II• Measurement of Force, Torque and Shaft Power• Pressure Measurement• Temperature Measurement• Flow Measurement• Level Measurement• Telemetry and Data Acquisition System• Display Devices and Systems• Monitors and Recorders• Microprocessors and Computers in

Instrumentation• Principles of Process Control

• Analog Controllers• Digital Controllers• Sampling and Signal Conversion• The z-Transform• Transfer Functions, Block Diagrams

and Signal Flow Graphs• Transform Design of Digital Controls• State Space Analysis of Sampled Data Systems• Design of Digital Control Using

State Space Analysis• Mechanization of Control Algorithms

Using Microprocessors• Appendices• References• Index

Size : 20 x 26/8Pages : 450 Approx.ISBN :

Price Rs. : 265/-First Edition: 2011

ELECTRICALINSTRUMENTATION

ANDCONTROL SYSTEM

By: Onkar N. Pandey

(Power Electronics )

CONTENTS :• Wave Shaping Circuits• Multivibrator (MV) Circuits• Timer I.C.• Time Base Circuits

(Sweep Generators)• Integrated Electronics & I.C.s• Regulated Power Supply

(and Special Power Supplies)• PLL & V.C.O.• Thyristors and UJT• Operational Amplifiers (Op-Amps)

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-399-5

Price Rs. : 150/-Reprint : 2013

ELECTRONICDEVICES

&CIRCUITS-III

By: M.L. Anand

• Introduction to Digital Electronics andMicroprocessors

• Experiments• Appendices• Solved Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS48

CONTENTS :• Introduction• Bioelectric Potentials• Transducers• Electrodes• Cardiovascular Measurements• Patient Care and Monitoring• Measurements in the Respiration System• Diagnostic Techniques• Biotelemetry• Therapeutic And Prosthetic Devices• Nervous System• Ophthalmology Instruments

• Some General Topics• Monitors and Recorders• Shock Hazards and Prevention• Microprocessors and Computers in

Biomedical Instrumentation• Basic Electronics for Biomedical

Instrumentation• Practicals in Biomedical Instrumentation• Appendices• References• Index

Fundamentals ofBIO-MEDICAL

INSTRUMENTATION

By: O.N. Pandey

Size : 20 x 26/8Pages : 380 Approx.ISBN : 978-93-5014-352-0

81-88458-97-X

Price Rs. : 225/-Reprint : 2013

CONTENTS :• Introduction• Basic Concepts• Demand Forecasting• Market Structure• National Income, Inflation and

Business Cycles• Money and Banking System• Economic Fluctuations

Unemployment and Inflation• Case studies• Production Planning and Control• Value Engineering• Quality Management

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-062-8

Price Rs. : 165/-Second Edition : 2012

ENGINEERINGAND MANAGERIAL

ECONOMICS

By: O.N. PandeyBhupesh Aneja

CONTENTS :• Anatomy and Physiology• Overview of Medical Electronics

Equipments• Electrodes• Transducers• Bio-Medical Recorders• Patient Monitoring Systems• Safety Aspects of Medical Instruments• Practicals in Medical Electronics• Appendices• Index

Size : 20 x 26/8Pages : 174 Approx.ISBN : 81-89757-46-6

Price Rs. : 95/-Reprint : 2008

MEDICALELECTRONICS

By: Onkar N. PandeyRakesh Kumar

INSTRUMENTATIONAND PROCESS

CONTROL

By: O.N. Pandey

• Introduction to Control Systems• Principle of Process Control• Analog Controllers• Digital Controllers• Aspects of Modern Control Systems• Some Typical Processes, Control

Systems and Modelling• Analytical Methods for Process Control• Basic Electronics• Appendix• References• Index

CONTENTS :• Instrumentation• Generalized Performance Characteristics• Sensors and Transducers• Measurement of Force, Torque, and

Shaft Power• Pressure Measurement• Temperature Measurement• Flow Measurement• Level Measurement• Telemetry• Display Devices and Systems• Monitors and Recorders• Microprocessors and Computers in

Instrumentation

Size : 20 x 26/8Pages : 450 Approx.

Price Rs. : 195/-Reprint : 2010

• Maintenance Functions• General Maintenance• Swot Analysis• Glossary• Appendices• References• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 49

CONTENTS :• Introduction to Biomedical Signal

Processing• Sources of Bioelectric Potentials• Basics of ECG, EEG, EMG, and ERG• Transducers and Electrodes and

Biomedical Application• Role of Computers in Biomedical

Instrumentation• Data Reduction Techniques• QRS Detection• Evoked Potential Estimation

BIO-MEDICALSIGNAL

PROCESSING

By: Prof. Rakesh Kumar

• Neurological Signal Processing• Monitors and Recorders• Appendix• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-80027-26-5

Price Rs. : 175/-Reprint : 2010

ELECTROMAGNETICSAND ANTENNAS

By: H. Singh

Size : 20 x 26/8Pages : 500 Approx.ISBN : 978-93-5014-304-9

Price Rs. : 250/-First Edition : 2013

CONTENTS :• Introduction to VHDL• Design of Networks for Arithmetic

Operation• Floating Point Arithmetic• Memory Models for Memories and

Buses• Design Examples• Index

DIGITAL CIRCUITSYSTEM USING

VHDL

By: Shipra GuptaNeha Gupta

(For UPTU)

Size : 20 x 26/8Pages : 225 Approx.

Price Rs. : 165/-First Edition : 2009

CONTENTS :Unit-1: Vector Algebra and Theorems• Vector Algebra• Integral TheoremsUnit-II: Electrostatics• Electrostatics• CapacitanceUnit-III: Three Magnetostatics• MagnetostaticsUnit-IV: Electromagnetic Waves• Maxwell’s Equations• Electromagnetic Waves• Wave Propagation

Size : 20 x 26/8Pages : 550 Approx.ISBN : 978-93-80027-53-1

Price Rs. : 265/-Second Revised Edition : 2010

ELECTROMAGNETICFIELD THEORY

By: Parul Dawar

Unit-V: Transmission Lines• Transmission Lines• UHF Lines and Smith Chart• Equalizers and Attenuators• Appendices• Previous Year Question Papers• Index

CONTENTS :• Introduction• Electromagnetic Waves• Wave Guides• Transmission Lines• Electromagnetic Radiation from Antenna• Antenna Parameters• Linear Wire Antenna's• Antenna Arrays• Aperture Antenna's• Radio Wave Propagation

• Model Test Papers• University Previous

Year Question Papers• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS50

VLSIDESIGN

By: C.P. Verma

CONTENTS :• Introduction to VLSI• MOSFET Fabrication• MOS Transistor• MOS Inverters• Combinational MOS Logic Circuits• Sequential MOS Logic Circuits• Dynamic Logic Circuits• Semiconductor Memories• Low-Power CMOS Logic Circuits• Design for Testability

• Programmable Logic Structures,FPGA and ASICs

• Packaging and Parametric Yield• Appendix• Previous Years Question Papers• Model Question Paper• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-036-9

Price Rs. : 250/-Second Edition : 2011

Size : 20 x 30/8Pages : 275 Approx.ISBN : 978-93-5014-370-4

Price Rs. : 195/-First Edition : 2013

MICROCONTROLLER& EMBEDDED

SYSTEMS

By: Ankaj Gupta

CONTENTS :• Microprocessors and Microcontrollers• Introduction to Microcontrollers• PIC Microcontroller• 8051 Microcontroller• Real Time Applications of 8051

Microcontroller• Embedded Systems• AVR Microcontrollers• Appendices• Glossary• List of Experiments

CONTENTS:• Microprocessors and its Overview• 8085 Microprocessor (8-Bit)• 8086 Microprocessor• 8086 Interrupt Structure• Memory Interfacing and Address

Decoding Techniques for 8086Microprocessor

• 8086 Instruction Set• Techniques for Assembly Language

Programming with DOS and BIOSFunctions for 8086 Microprocessor

Size : 20 x 30/8Pages : 850 Approx.ISBN : 81-89757-27-X

Price Rs. : 410/-Reprint : 2012

MICROPROCESSORand

INTERFACING

By: N. Marriwala

• Input/Output Chips and TheirInterfacing with 8086 Microprocessor

• The 80286/287 Microprocessors• The 80386/387/486 Microprocessors• The Pentium Processor• Application of Microprocessors• 8051 Microcontroller• Appendix• Question Bank• Model Test Papers• Index

Size : 20 x 30/8Pages : 280 Approx.ISBN : 978-93-5014-254-7

Price Rs. : 195/-First Edition : 2012

EMBEDDEDSYSTEMS DESIGN

By: N. MarriwalaRitu Khullar

CONTENTS :• Introduction to Embedded System• Architecture of Microcontroller• Interrupts and I/O Ports• Development Tools• Programming with Microcontrollers• Designing Using Microcontroller• Sensors and its Interfacing• Examination Papers• Index

• Bibliography• Model Test Paper• Examination Paper• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 51

CONTENTS :Unit-0: Introduction to Radar Systems• Introduction to Radar Systems

Unit-1: Radar Signal Models• Radar Signal Models

Unit-2: Radar Waveforms• Radar Waveforms

Unit-3: Detection Fundamentals• Detection Fundamentals

Unit-4: Navigation Systems-I• Radio Direction Finding• Radio Ranges• Hyperbolic Systems of Navigation

FUNDAMENTALS OFRADAR &

NAVIGATION

By: Sachin Gupta

Size : 20 x 26/8Pages : 315 Approx.ISBN : 978-93-5014-386-5

Price Rs. : 175/-Fourth Edition : 2013

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-80027-52-4

Price Rs. : 220/-Fifth Edition : 2013

OPTICALNETWORKS

By: Sachin Gupta

CONTENTS :Unit-0:• Optical NetworksUnit-I:• Introduction to Optical NetworksUnit-II:• Optical ComponentsUnit-III:• Sonet/SDH Networks• Optical Transport Networks• WDM Network ElementsUnit-IV:• WDM Network Design Issues &

Introduction to Access Networks• Network Survivability and Protection

MechanismsUnit-V:• Optical Switching and Deployment

Considerations• Appendices• Glossary• Model Test Papers• Previous Years Question Papers• Index

Unit-4: Navigation Systems-II• Aids to Approach and Landing• Doppler Navigation• Satellite Navigation Systems• Question Bank• Appendices• Glossary• Sample Papers and Previous Year

Question Papers• Index

OPTICALINSTRUMENTATION

By: Satyajit Das

MICROWAVEAND RADAR

ENGINEERING

By: Ravi GargAnkaj Gupta

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-251-6

Price Rs. : 195/-Second Edition : 2013

CONTENTS :Section-A:• Introduction to Microwave• WaveguidesSection-B:• Microwave Components• Ferrite DevicesSection-C:• Microwave Solid State Devices• Microwave Measurement

Section-D:• Radar• Doppler Radars• Objective Type and Short Answers

Questions• Practical Experiments• Bibliography• Index

CONTENTS :• Introduction to Optoelectronics• Light and its Properties• Optical Fiber and its Properties• Optoelectronic Sources/Detectors and

Laser Fundamentals• Industrial Applications of Laser• Optoelectronic Amplifiers and

Modulators• Interferometry• Holography and Fourier Optics• Optical Fiber Sensors• Fiber Optic Fundamentals and

Measurements

• Optical Computing• Multiple Choice Questions• Appendices• Model Question Papers• Examination Papers• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-297-4

Price Rs. : 240/-First Edition: 2012

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS52

Size : 20 x 30/8Pages : 275 Approx.ISBN : 978-93-5014-335-3

Price Rs. : 195/-First Edition : 2012

ANTENNA AND WAVEPROPAGATION

By: Prasant Pandey

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-318-6

Price Rs. : 195/-First Edition : 2012

VLSIDESIGN

By: Sarita Chauhan

CONTENTS :• Antenna Basics• Radiation• Isotropic Point Sources and Arrays of

Point Sources• Effect of Earth on Pattern• Loop Antenna• Practical Antennas• Reflector Antenna• Antenna Measurement• Electromagnetic Wave Propagation• Multiple Choice Questions• Examination Question Papers• Index

By: M. Elangovan

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-355-1

Price Rs. : 235/-First Edition : 2012

ELECTRONICCIRCUITS

CONTENTS :• Transistor BIAS Stability• Midband Analysis of Small Signal

Amplifiers• Frequency Response of Amplifiers• Large Signal Amplifiers• Rectifiers and Power Supplies• Model Question Papers• Index

CONTENTS :Part-1: VLSI Design• Introduction• Basics of MOS Technology• Basic Electrical Properties of MOS

Circuits• CMOS Logic Circuits• Basic Physical Design Rules and Stick

Diagrams• Layouts of Simple Logic Gates• Low Power VLSI Design

Part-2 : VHDL• Introduction• General Features of VHDL• Synthesis Issues• Simulation and Testbench Issues• Appendix• Index

ELECTRONICS ENGINEERING

S.K. KATARIA & SONS 53

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-383-4

Price Rs. : 250/-First Edition : 2013

CONTROLSYSTEMS

ENGINEERING

CONTENTS :• Basic Concepts of Control System• Feedback and its Characteristics• Control System Components• Time Response Analysis of Control

System• Introduction to Controllers• State Space Analysis• Stability Analysis• Root Locus• Frequency Response Analysis

• Stability Analysis Using Polar andNyquist Plot

• Introduction to Non-linear Systems• Mat-Lab• Index

By: Dr. S. PandaS. PadhyS. R. Das

GATEELECTRONICS ANDCOMMUNICATION

Size : 23 x 36/8Pages :ISBN :

Price Rs. :Edition :

By : S.K. Rai

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS

Size : 23 x 36/8Pages : 2500 Approx.ISBN : 81-85749-31-0

Price Rs. : 1400/-Twelfth Edition : 2009

A COURSE INELECTRICAL

TECHNOLOGY

Size : 23 x 36/8Pages : 800 Approx.ISBN : 81-85749-29-9

Price Rs. : 395/-Reprint : 2012

54

By: J.B. Gupta

By: J.B. Gupta

CONTENTS :VOLUME I: Basic Electrical Engineering• Current Electricity-Basic Concepts• DC Circuits• Units, Work, Power and Energy• DC Network Analysis• Electro-Chemical Energy Sources and

Electrolysis• Static Electric Field• Capacitance• Magnetism and Electromagnetism• Magnetic Circuits and Induction• Magnetic Hysteresis and Eddy Currents• Thermoelectricity• Electrical Installation and Wiring• Fundamentals of Alternating Currents• Single Phase Series Circuits• Complex Notations and Circuit Analysis• Single Phase Parallel and Series-Parallel

Circuits• Resonance in R-L-C Circuits• Locus Diagrams• Applications of Network Theorems to AC

Circuits• Polyphase Systems• Harmonics• Harmonics Analysis• Transients

A COURSE INELECTRICAL

TECHNOLOGY(Basic Electrical Engineering)

Vol. I

• Symmetrical Components• Electrical Wave Filters• Laplace and Fourier Transforms• Measurements, Instruments

and Accessories• Galvanometers, Ammeters and

Voltmeters• Extension of Instruments Range• Wattmeters and Energy Meters• Miscellaneous Indicating

Instruments• Potentiometers• Measurement of Resistance• Localization of Cable Faults• AC Bridges• Objective Type QuestionsVOLUME II: Electrical Machines• Principles of Electromechanical

Energy Conversion• Basic Concepts of Rotating

Electrical Machines• Construction of DC Machines• Armature Reaction and

Commutation in DC Machines• Operating Characteristics and

Applications of DC Generators

• Parallel Operation of DC Generators• Operating Characteristics and Applications of

DC Motors• Speed Control, Starting and

Braking of DC Motors• Losses, Testing and Efficiency of DC Machines• Transformers• Synchronous Generators or Alternators• Synchronous Motors• Parallel Operation of Alternators• Construction, Theory and Operation of

Three Phase Induction Motors• Starting, Speed Control and Braking of Three

Phase Induction Motors• Special Induction and Polyphase Commutator

Machines• Single Phase Motors• Special Electrical Machines• Electronic Control of Electric Motors• Objective Type QuestionsVOLUME III:Electronic Devices and Circuits• Introductory Concepts• Electron Dynamics• Electron Emission• Semiconductor Physics• Junction Diodes• Zeners and other Two-Terminal Devices• Rectifiers• Bipolar Junction Transistors (BJTs)• Field Effect Transistors• Hybrid Parameters• Transistor Biasing and Stabilization• Single Stage Transistor Amplifiers• Amplifier Frequency Response• High-Frequency Transistor• Multistage Amplifiers• Large Signal or Power Amplifiers• Feedback in Amplifiers• Tuned Amplifiers• Differential Amplifiers• Sinusoidal Oscillators

• Modulation and Demodulation• Optoelectronic Devices• Power Semiconductor Devices• Wave Shaping Circuits• Switching Circuits (Multivibrators)• Integrated Circuits• Operational Amplifiers• Waveform Generators and Nonlinear Circuits• The 555 IC Timer• Active Filters• Phase-Locked Loops (PLL)• Regulated and Switching Power Supplies• Number Systems and Codes• Logic Gates and Boolean Algebra• Logic Circuits• Digital Logic Families• Digital-To-Analog and Analog-To-Digital

Converters• Microcomputers and Microprocessors• Electronic (Analog as Well as Digital)

Instruments• Cathode Ray Oscilloscope• Objective Type Questions• AppendicesVOLUME IV:Electrical Power• Electrical Power Plants• Power Substations and Major Electrical

Equipment in Power Stations• Electrical Supply Systems• Mechanical Design of Overhead Lines• Performance of Transmission Lines• Underground Cables• Distribution of Electrical Power• Economic Considerations• Industrial Utilization• Electric Heating and Welding• Illumination Engineering• Electric Traction• Objective Type Questions• Index

CONTENTS :• Current Electricity-Basic Concepts• DC Circuits• Units, Work, Power and Energy• DC Network Analysis• Electro-Chemical Energy Sources and

Electrolysis• Static Electric Field• Capacitance• Magnetism and Electromagnetism• Magnetic Circuits and Induction• Magnetic Hysteresis and Eddy Currents• Thermoelectricity• Electrical Installation and Wiring• Fundamentals of Alternating Currents• Single Phase Series Circuits• Complex Notations and Circuits Analysis• Single Phase Parallel and Series-Parallel

Circuits• Resonance in R-L-C Circuits• Locus Diagrams

• Applications of NetworkTheorems to AC Circuits

• Polyphase Systems• Harmonics• Harmonics Analysis• Transients• Symmetrical Components• Electrical and Wave Filters• Laplace and Fourier Transforms• Measurements, Instruments and

Accessories• Galvanometers, Ammeters and Volumeters• Extension of Instrument Range• Wattmeters and Energy Meters• Miscellaneous Indicating Instruments• Potentiometers• Measurement of Resistance• Localization of Cable Faults• AC Bridges• Objective Type Questions• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS 55

Size : 23x 36/8Pages : 750 Approx.ISBN : 81-85749-14-0

Price Rs. : 375/-Reprint : 2011

A COURSE INELECTRICAL

TECHNOLOGY

Size : 23 x 36/8Pages : 950 Approx.ISBN : 81-88458-74-0

Price Rs. : 425/-Reprint : 2011

A COURSE INELECTRICAL

TECHNOLOGY

By: J.B. Gupta

CONTENTS :• DC Circuits• Alternating (Sinusoidal) Voltage and

Current• Single Phase AC Circuits• Complex Notations and Circuits Analysis• Transient Response• Network Theorems (Network Analysis)• Series and Parallel AC Circuits• Three Phase Circuits• Transformers• DC Machines-I (Generators)• DC Machines-II (Motors)• Synchronous Machines (Generators and

Motors)

Size : 20 x 30/8Pages : 550 Approx.ISBN : 81-88458-43-0

Price Rs. : 275/-Reprint : 2011

ELECTRICALTECHNOLOGY

By: J.B. Gupta

• Wave Shaping Circuits• Switching Circuits (Multivibrators)• Integrated Circuits• Operational Amplifiers• Waveform Generators and Nonlinear

Circuits• The 555 IC Timer• Active Filters• Phase-Locked Loops (PLL)• Regulated and Switching Power Supplies• Number Systems and Codes• Logic Gates and Boolean Algebra• Logic Circuits• Digital Logic Families• Digital-to-Analog and Analog-to-Digital

Converters• Microcomputers and Microprocessors• Electronic (Analog as well as Digital)

Instruments• Cathode Ray Oscilloscope• Objective Type Questions• Appendices• Index

• Three Phase Induction Motors• Single Phase Induction Motors• Measuring Instruments• Lab Practicals• Model Test Papers• Examination Papers• Index

(Electrical Machines)Vol. II

CONTENTS :• Principles of Electromechanical

Energy Conversion• Basic Concepts of Rotating Electrical

Machines• Construction of DC Machines• Operating Characteristics and

Applications of DC Generators• Parallel Operation of DC Generators• Operating Characteristics and

Applications of DC Motors• Speed Control, Starting and Braking

of DC Motors• Losses, Testing and Efficiency of

DC Machines• Transformers

(Electronic Devices & Circuits)Vol. III

By: J.B. Gupta

CONTENTS :• Introductory Concepts• Electron Dynamics• Electron Emission• Semiconductor Physics• Junction Diodes• Zeners and Other Two-Terminal Devices• Rectifiers• Bipolar Junction Transistors (BJTs)• Field Effect Transistors• Hybrid Parameters• Transistor Biasing and Stabilization• Single Stage Transistor Amplifiers• Amplifier Frequency Response• High-Frequency Transistor• Multistage Amplifiers• Large Signal or Power Amplifiers• Feedback in Amplifiers• Tuned Amplifiers• Differential Amplifiers• Sinusoidal Oscillators• Modulation and Demodulation• Optoelectronic Devices• Power Semiconductor Devices

• Transformers (Continued)• Synchronous Generators or Alternators• Synchronous Motors• Parallel Operation of Alternators• Construction, Theory and Operation

of Three Phase Induction Motors• Starting, Speed Control and Braking

of Three Phase Induction Motors• Special Induction and Polyhase

Commutator Machines• Single Phase Motors• Special Electrical Machines• Electronic Control of Electric Motors• Objective Type Questions• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS56

CONTENTS :• Introductory• Hydroelectric Power Plants• Steam Power Plants• Nuclear Power Plants• Diesel Electric Power Plants• Gas Turbines Power Plants• Non-Conventional Methods of Power

Generation• Selection of Power Plant• Economic Operation of Power Plants• Combined Operation of Power Plants

• Environmental Aspects of ElectricEnergy Generation

• Cogeneration and Energy Conservation• Interconnected Systems• Power Plants Economics• Tariffs and Power Factor Improvement• Substations• Major Electrical Equipment in Power

Plants• Objective Type Questions• Index

GENERATION ANDECONOMIC

CONSIDERATIONS

CONTENTS :Volume I: Power SystemsPart-I: Generation and Economic Considerations• Introductory• Hydroelectric Power Plants• Steam Power Plants• Nuclear Power Plants• Diesel Electric Power Plants• Gas Turbine Power Plants• Non-Conventional Methods of Power

Generation• Selection of Power Plant• Economic Operation of Power Plants• Combined Operation of Power Plants

Size : 23 x 36/8Pages : 1650 Approx.ISBN : 978-93-5014-374-2

81-88458-53-8

Price Rs. : 675/-Fifteenth Edition : 2013

A COURSE INELECTRICAL

POWER

By: J.B. Gupta

By: J.B. Gupta

• Environmental Aspects of ElectricEnergy Generation

• Cogeneration and EnergyConservation

• Interconnected Systems• Power Plants Economics• Tariffs and Power Factor

Improvement• Objective Type QuestionsPart-II: Transmission and Distributionof Electrical Power• Supply Systems• Mechanical Design of Overhead

Lines• Overhead Line Insulators

Size : 20 x 36/8Pages : 400 Approx.ISBN : 978-93-5014-275-2

81-85749-19-1

Price Rs. : 285/-Second Edition : 2012

• Corona• Transmission Line Constants• Performance of Short and Medium Transmission

Lines• Performance of Long Transmission Lines• Underground Cables• DC Distribution• AC Distribution• Insulation Resistance of a System• Interference of Power Lines with Neighboring

Communication Lines• Extra High Voltage (EHV) AC Transmission• High Voltage Direct Current (HVDC) Transmission• Construction, Testing and Commissioning of

Overhead Lines• Objective Type QuestionsPart-III: Switchgear and Protection• Introductory• Representation of Power System Components• Symmetrical Components• Symmetrical Fault Analysis• Unsymmetrical Fault Analysis• Fuses• Circuit Breaking• Circuit Breakers• Protective Relays• Static Relays• Protection of AC Generators and Motors• Transformer Protection• Bus-Bar Protection• Protection of Feeders and Transmission Lines• Protection against Overvoltages due to Lightning

• Travelling Waves• Insulation Co-ordination• Power System Earthing• Voltage Control• Substations• Power System Stability• Power Flow Studies• Objective Type QuestionsVolume II: Utilization of Electric Power and ElectricTractionSection A: Electric Drives and Industrial Applications• Electric Drives• Control Drives for Industrial Motors• Thyristor Control of Electric Motors• Motors for Particular ServicesSection B: Electric Power Utilization• Electric Heating• Electric Welding• Illumination Engineering• Electrolytic Processes• Refrigeration and Air ConditioningSection C: Electric Traction• Traction Systems• Train Movement and Energy Consumption• Electric Traction Motors• Control of Traction Motors• Braking; Mechanical Considerations and Control

Equipment• Power Supply for Electric Traction• Objective Type Questions• Index

CONTENTS :Part-I: Generation and Economic Considerations• Introductory• Hydroelectric Power Plants• Steam Power Plants• Nuclear Power Plants• Diesel Electric Power Plants• Gas Turbine Power Plants

• Cogeneration and Energy Conservation• Interconnected Systems• Power Plants Economics• Tariffs and Power Factor Improvement• Objective Type QuestionsPart-II: Transmission and Distribution of ElectricalPower• Supply Systems• Mechanical Design of Overhead Lines• Overhead Line Insulators• Corona• Transmission Line Constants• Performance of Short and Medium Transmission

Lines• Performance of Long Transmission Lines• Underground Cables• DC Distribution• AC Distribution• Insulation Resistance of a System• Interference of Power Lines with Neighbouring

Communication Lines• Extra High Voltage (EHV) AC Transmission• High Voltage Direct Current (HVDC)

Transmission• Construction, Testing and Commissioning of

Overhead Lines

Size : 23 x 36/8Pages : 1250 Approx.ISBN : 978-93-5014-373-5

81-88458-52-X

Price Rs. : 550/-Eleventh Edition : 2013

A COURSE INPOWER

SYSTEMS

• Non-Conventional Methods ofPower Generation

• Selection of Power Plant• Economic Operation of Power

Plants• Combined Operation of Power

Plants• Environmental Aspects of Electric

Energy Generation

• Objective Type QuestionsPart-III: Switchgear and Protection• Introductory• Representation of Power System Components• Symmetrical Components• Symmetrical Fault Analysis• Unsymmetrical Fault Analysis• Fuses• Circuit Breaking• Circuit Breakers• Protective Relays• Static Relays• Protection of AC Generators and Motors• Transformer Protection• Bus-Bar Protection• Protection of Feeders and Transmission Lines• Protection against Overvoltages due to Lightning• Travelling Waves• Insulation Co-ordination• Power System Earthing• Voltage Control• Substations• Power System Stability• Power Flow Studies• Objective Type Questions• Index

By: J.B. Gupta

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS 57

CONTENTS :Part-I: DC Machines• Magnetic Circuits and Induction• Principles of Electromechanical Energy

Conversion• Basic Concepts of Rotating Electrical

Machines• Construction of DC Machines• Armature Reaction and Commutation in

DC Machines• Operating Characteristics and Application

of DC Generators• Parallel Operation of DC Generators• Operating Characteristics and Applications

of DC Motors• Speed Control, Starting and Braking of

DC Motors• Losses, Testing and Maintenance of

DC Machines• Special Types of DC Machines• Thyristor Control of Electric Motors• Objective Type Questions

THEORY & PERFORMANCE OFELECTRICALMACHINES

CONTENTS :Section-A: Electric Drives and IndustrialApplications• Electric Drives• Control Devices for Industrial Motors• Thyristor Control of Electric Motors• Motors for Particular ServicesSection-B: Electric Power Utilization• Electric Heating• Electric Welding• Illumination Engineering• Electrolytic Processes• Refrigeration and Air-Conditioning

Size : 23 x 36/8Pages : 502 Approx.ISBN : 978-93-5014-258-5

81-88458-55-4

Price Rs. : 300/-Reprint : 2013

UTILIZATION OFELECTRIC POWER &

ELECTRIC TRACTION

By: J.B. Gupta

By: J.B. Gupta

Section-C: Electric Traction• Traction Systems• Train Movement and Energy Consumption• Electric Traction Motors• Control of Traction Motors• Braking : Mechanical Considerations and

Control Equipment• Power Supply for Electric TractionSection-D: Economic Considerations• Economic Considerations• Tariffs and Power Factor Improvement• Objective Type Questions• Index

Size : 20 x 30/8Pages : 775 Approx.ISBN : 978-93-5014-277-6

81-85749-15-9

Price Rs. : 495/-Reprint : 2013

Part-II: Polyphase Circuits• Polyphase Circuits• Objective Questions with AnswersPart-III: AC Machines• Transformers• Transformers (Continued)• Synchronous Generators or Alternators• Rotating Magnetic Fields• Synchronous Motors• Parallel Operation of Alternators• Construction, Theory and Operation

of Polyphase Induction Motors• Starting, Speed Control and Braking of

Polyphase Induction Motors• Special Induction and Polyphase

Commutator Machines• Fractional Kilowatt Motors• Synchronous Converters• Rectifiers• Objective Questions with Answers• Index

CONTENTS :• General Principles of Estimating• Wiring Systems• Wiring Materials and Accessories• Earthing Systems• Inspection and Testing of Installations• Lighting Sub-Circuits• Lighting Schemes and Calculations• Internal Wiring Estimation• Electrical Installation for Power Circuits• Overhead Transmission and Distribution

Line

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-279-0

81-88458-99-6Price Rs. : 295/-Ninth Edition : 2012

A COURSE INELECTRICAL

INSTALLATIONESTIMATING

AND COSTING

By: J.B. Gupta

CONTENTS :• Introductory• Representation of Power System

Components• Symmetrical Components• Symmetrical Fault Analysis• Unsymmetrical Fault Analysis• Fuses• Circuit Breaking• Circuit Breakers• Protection Relays• Static Relays• Protection of AC Generators and Motors• Transformer Protection

Size : 23 x 36/8Pages : 550 Approx.ISBN : 978-93-5014-372-8

81-88458-41-4

Price Rs. : 315/-Third Edition : 2013

SWITCHGEARand

PROTECTION

By: J.B. Gupta

• Underground Distribution Lines• Installation of Service Connections• Substations• Ventilation-Electric Fans-Airconditioning• Remote Control Wiring• Appendices• Index

• Bus-Bar Protection• Protection of Feeders and Transmission

Lines• Protection Against Overvoltages due to

Lightning• Travelling Waves• Insulation Co-ordination• Power System Earthing• Voltage Control• Substations• Power System Stability• Power Flow Studies• Objective Type Questions• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS58

By: J.B. Gupta

CONTENTS :Part-I: Electrical Engineering• Current Electricity-Basic Concepts• DC Circuits• Units, Work, Power and Energy• DC Network Analysis• Electrochemical Energy Sources and Electrolysis• Static Electric Field• Capacitance• Magnetism and Electromagnetism• Magnetic Circuits and Induction• Magnetic Hysteresis and Eddy Currents• Fundamentals of Alternating Currents• Single Phase Series Circuits• Complex Notations and Circuit Analysis• Single Phase Parallel and Series-Parallel Circuits• Resonance in R-L-C Circuits• Three Phase AC Circuits• Electrical Measuring Instruments• Transformers• Principles of Electromechanical Energy

Conversion and Basic Concepts of RotatingElectrical Machines

• DC Generators

Size : 20 x 30/8Pages : 1250 Approx.ISBN : 81-85749-37-X

Price Rs. : 495/-Reprint : 2012

FUNDAMENTALS OFELECTRICAL

ENGINEERINGand

ELECTRONICS

• DC Motors• Synchronous Generators• Synchronous Motors• Three Phase Induction Motors• Single Phase Motors• Electrical Installation and Wiring• IlluminationPart-II: Electronics Engineering• Introductory Concepts• Basic Semiconductor and P-N Junction Theory• Semiconductor Diodes• Diode Applications• Bipolar Junction Transistors (BJTs)• Small Signal Low Frequency Transistor Amplifier• Field Effect transistors (FETs)• Thyristors• Optoelectronic Devices• Integrated Circuits• Number Systems and Codes• Logic Gates and Boolean Algebra• Electronic Instruments• Objective Type Questions• Index

CONTENTS :• Supply Systems• Mechanical Design of Overhead Lines• Overhead Line Insulators• Corona• Transmission Line Constants• Performance of Short and Medium

Transmission Lines• Performance of Long Transmission Lines• Underground Cables• DC Distribution• AC Distribution• Insulation Resistance of a System• Interference of Power Lines with

Size : 23 x 36/8Pages : 502 Approx.ISBN : 978-93-5014-362-9

81-85749-57-4

Price Rs. : 295/-Tenth Edition : 2012

TRANSMISSION &DISTRIBUTION OF

ELECTRICAL POWER

By: J.B. Gupta

CONTENTS :• Introductory Concepts• Electrical Circuit Analysis• Alternating (Sinusoidal) Voltage

and Current• Single Phase AC Circuits• Phasor Algebra and AC Circuits• Three Phase AC Circuits• Magnetism and Electromagnetism• Magnetic Circuits• Transformers• Principles of Electromechanical Energy

Conversion and Basic Concepts of

Rotating Electrical Machines• DC Machines-I (Generators)• DC Machines-II (Motors)• Three-Phase Synchronous Machines

(Generators and Motors)• Three Phase Induction Motors• Single Phase Induction Motors • Electrical Measuring Instruments• Laboratory Practicals• Objective Type Questions• Examination Papers• Index

Size : 20 x 30/8Pages : 650 Approx.ISBN : 81-85749-81-7

Price Rs. : 310/-Reprint : 2011-12

BASICELECTRICAL

ENGINEERING

By: J.B. Gupta

BASICELECTRICITY

By: J.B. GuptaRajeev ManglikRohit Manglik

CONTENTS :Unit-I: Electrostatics• Static Electric Field• CapacitorsUnit-II: DC Circuits• OHM’S Law, Units, Work,

Power and Energy• DC CircuitsUnit-III: Basic Magnetism andElectromagnetism• Magnetism and Electromagnetism• Electromagnetic InductionUnit-IV: AC Theory and MeasuringInstruments

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-203-5

Price Rs. : 185/-Thirteenth Edition : 2011-12

• AC Theory• Measuring InstrumentsUnit-V: Voltage and CurrentSources and Circuit Theorems• Voltage and Current Sources• Network Theorems• Laboratory Practicals• Objective Type Questions• MULTIPLE Choice Type Questions• True/False Type Questions• Fill in the Blanks Type Questions• Index

Neighbouring• Communication Lines• Extra High Voltage AC Transmission• High Voltage Direct Current (HVDC)

Transmission• Construction, Testing and Commissioning of• Overhead Lines• Neutral Grounding• Voltage Control• Power System Stability• Power Flow Studies• Objective Type Questions with Answers• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS

CONTENTS :• Measurements and Measurement

Systems• Units and Standards of Measurements• Errors in Measurements and their

Analysis• Measuring System Fundamentals• Analog Ammeters and Voltmeters• Extension of Instrument Range• Analog Measurement of Power and

Wattmeters• Measurement of Energy and

Energy Meters

Size : 20 x 30/8Pages : 600 Approx.ISBN : 81-88458-26-0

Price Rs. : 295/-Reprint : 2012

ELECTRICALMEASUREMENTSAND MEASURING

INSTRUMENTS

CONTENTS :Unit-I: Conducting Materials• Conducting Materials

Unit-II: Dielectric Materials• Dielectric Materials

Unit-III: Magnetic Materials• Magnetic Materials

Unit-IV: Semiconductors• Semiconductors

Unit-V: Construction and Characteristicsof Devices• Construction and Characteristics of

Semiconductor Devices

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-300-1

81-88458-62-7

Price Rs. : 245/-First Edition : 2012

ELECTRICALENGINEERINGMATERIALS &

SEMICONDUCTORDEVICES

59

By: J.B. Gupta

By: J.B. GuptaRenu Gupta

• Measurement of Speed, Frequencyand Power Factor

• Measurement of Resistance• Potentiometer• AC Bridges• Magnetic Measurements• Digital Measurement of Electrical

Quantities• Signal Analyzers• Cathode Ray Oscilloscope• Examination Papers• Index

CONTENTS :Unit-I: DC Circuits• DC CircuitsUnit-II: Electrostatics and Capacitance• Electrostatics and CapacitanceUnit-III: Electromagnetics• Electromagnetics• Electromagnetic InductionUnit-IV: Single Phase AC Circuits• Fundamentals of Alternating Currents• Single Phase Series Circuits• Complex Algebra and Circuit Analysis• Single Phase Parallel and Series-Parallel

Circuits

Size : 20 x 30/8Pages : 500 Approx.

ISBN : 978-93-80027-27-2

Price Rs. : 250/-First Edition : 2009

ELEMENTS OFELECTRICAL

ENGINEERING

By: J.B. Gupta

• Resonance in R-L-C CircuitsUnit-V: Polyphase Circuits• Polyphase CircuitsUnit-VI: Batteries and Cables• Batteries• CablesUnit-VII: Electrical Wiring• Electrical WiringUnit-VIII: Illumination• IlluminationUnit-IX: Safety and Protection• Safety and ProtectionObjective Types Questions• Index

Unit-VI : Bipolar and MOS Devices• Bipolar Junction Transistors (BJTs)• MOS (Metal-Oxide Semiconductor)

Devices (JFETs, MOSFETs and UJJ)

Unit-VII: Power Devices• Power Devices• Appendices• Model Papers• Index

ELEMENTS OFELECTRIC

DRIVES

By: J.B. GuptaRajeev ManglikRohit Manglik

CONTENTS :• Electric Drives• Control Devices for Industrial Motors• Thyristor Control of Electric Motors• Motors for Particular Services• Examination Papers• Index

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-93-5014-200-4

Price Rs. : 185/-Reprint : 2012

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS60

CONTENTS :Part-I: Electrical Machines• DC Generators• DC Motors• Transformers• AC Generators and MotorsPart-II: Electronics• Electron Tubes• Semiconductors• Transistors• ThyristorsPart-III: Measuring Instruments• Electrical Measuring Instruments

Size : 20 x 30/8Pages : 550 Approx.

Price Rs. : 175/-Reprint : 2005

ELEMENTS OFELECTRICAL

ENGINEERINGand

ELECTRONICS

By: J.B. Gupta

• Electronic Instruments• OscillatorsPart-IV: Instrumentation• Instrumentation• Transducers• Measurement of Non-electrical

Quantities

By: J.B. Gupta

CONTENTS :Section-I: Electrical Engineering• DC Basics and Networks and Electromagnetic

Theory• AC Basics and Networks• DC Machines• AC Machines• Electrical Engineering Materials• Electrical Machine Design• Electrical Installation and Wiring• Electrical Power Generation and Economic

Considerations• Transmission and Distribution of Electrical

Power• Switchgear and Protection

Size : 23 x 36/8Pages : 800 Approx.ISBN : 978-81-89757-92-2

Price Rs. : 465/-Reprint : 2013

• Electrical Energy Utilisation and ElectricTraction

Section-II: Electronics• Electronic Components and Devices• Analog Electronics• Industrial and Power Electronics• Digital ElectronicsSection-III: Measurements, Instrumentationand Control• Electronics and Electrical Measurements and

Instruments• Electrical and Electronic Instrumentation• Control Systems• Model Test Papers

(With More than 12,000 ObjectiveType Questions & Answers)

CONTENTS :Section-I: Electrical Engineering• DC Basics and Networks and Electromagnetic

Theory• AC Basics and Networks• DC Machines• AC Machines• Electrical Engineering Materials• Electrical Machine Design• Electrical Installation and Wiring• Electrical Power Generation and Economic

Considerations• Transmission and Distribution of Electrical

Power• Switchgear and Protection• Electrical Energy Utilization and Electric

Traction

Section-II: Electronics• Electronic Components and Devices• Analog Electronics• Industrial and Power Electronics• Digital Electronics• Microprocessors• Communication SystemSection-III: Measurements, Instrumentationand Control• Electronic and Electrical Measurements and

Instruments• Electrical and Electronic Instrumentation• Control Systems• Model Test Papers• References

AN INTEGRATED COURSE INELECTRICAL

ENGINEERING

By: J.B. Gupta

Size : 23 x 36/8Pages : 1000 Approx.ISBN : 978-93-5014-368-1

Price Rs. : 595/-Fifth Edition :2013

(With More than 12,000 ObjectiveType Questions & Answers)

By: J.B. Gupta

CONTENTS :• Introductory ConceptsUnit-I: DC Circuit Analysis and Network• DC Circuit Analysis and Network

TheoremsUnit-II: Steady-State Analysis of SinglePhase AC Circuits• AC Fundamentals• Single Phase Series Circuits• Complex Notations and Circuit Analysis• Single Phase Parallel and Series-Parallel

Circuits• Resonance in R-L-C CircuitsUnit-III: Three-Phase AC Circuits andMeasuring Instruments• Three-phase AC Circuits• Measuring Instruments

Size : 20 x 30/8Pages : 605 Approx.ISBN : 978-93-5014-344-5

81-85749-80-9

Price Rs. : 395/-Reprint : 2013

A TEXTBOOK OFELECTRICAL

ENGINEERING

Unit-IV: Introduction to Power System,Magnetic Circuit and Single-PhaseTransformer• Introduction to Power System• Magnetic Circuits• Single-phase TransformersUnit-V: Electrical Machines• DC Machines-I (Generators)• DC Machines-II (Motors)• Three-phase Induction Motor• Single-phase Induction Motor• Three-phase Synchronous Machines• Experiments• Examination Papers• Index

(Two Colour Edition)

QUESTION BANK INELECTRICAL

ENGINEERING

(Two Colour Edition)

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS 61

CONTENTS :• Introductory ConceptsUnit-I: Circuit Analysis• Circuit AnalysisUnit-II: AC Circuits• AC Fundamentals• Single Phase Series Circuits• Complex Notations and Circuit Analysis• Single Phase Parallel and Series-Parallel

Circuits• Resonance in R-L-C Circuits• Three-Phase AC CircuitsUnit-III: Measuring Instruments• Ammeters and Voltmeters

• Wattmeters and Energy Meters• Cathode-ray Oscilloscope and

ApplicationsUnit-IV: Transformers and RotatingMachines• Transformers• DC Machines-I (Generators)• DC Machines-II (Motors)• Three Phase Induction Motors• Objective Types Questions• Examination Papers• Index

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-207-3

81-88458-12-0

Price Rs. : 295/-Reprint : 2013

A TEXTBOOK OFELECTRICAL

SCIENCE

By: J.B. Gupta

CONTENTS :Units-I & II: Synchronous Machines• Synchronous Generators or Alternators• Parallel Operation of Alternators• Synchronous MotorsUnit-III: Three Phase Induction Machines-I• Rotating Magnetic Fields• Three Phase Induction Machines-IUnit-IV: Three Phase Induction Machines-II• Three-Phase Induction Machines-IIUnit-V: Single Phase AC Motors• Single Phase Induction Motors

Size : 20 x 30/8Pages : 450 Approx.ISBN : 81-89757-09-1

Price Rs. : 265/-Reprint : 2011

ELECTRO-MECHANICAL

ENERGYCONVERSION-II

By: J.B. Gupta

• AC Commutator Motors• Model Test Papers• Examination Papers• Index

VOL-2

CONTENTS :Unit-I: Principles of ElectromechanicalEnergy Conversion• Magnetic Circuits and Induction• Principles of Electromechanical Energy

Conversion• Basic Concepts of Rotating Electrical

MachinesUnit-II: DC Machines• Construction of DC Machines• Armature Reaction and Communication

in DC Machines

Size : 20 x 30/8Pages : 460 Approx.ISBN : 978-93-5014-012-3

Price Rs. : 265/-Reprint : 2013

ELECTRO-MECHANICAL

ENERGYCONVERSION-I

By: J.B. Gupta

• Operating Characteristics andApplications of DC Generators

Unit-III: DC Machines (Continued)• Operating Characteristics and

Applications of DC Motors• Speed Control, Starting and Testing of

DC MachinesUnit-IV: Single Phase Transformer• Single Phase TransformersUnit-V: Three Phase Transformers• Three Phase Transformers• Question Papers• Index

VOL-1

CONTENTS :Module-I: Electrical Quantities• Electrical QuantitiesModule-II: Network Analysis Techniques• Network Analysis TechniquesModule-III: Alternating Current Circuits• Fundamentals of Alternating Current• Single Phase AC Circuits• Phasor Algebra and AC Circuits• Resonance in R-L-C Circuits• Three-phase AC CircuitsModule-IV: Network Theorems• Network Theorems

Module-V: Electromagnetism• Electromagnetism, Magnetism Circuits

and InductionModule-VI: Transformers• Transformers• Objective Type Questions• Index

Size : 20 x 30/8Pages : 425 Approx.ISBN : 81-89757-99-7

Price Rs. : 250/-Reprint : 2012

ELECTRICALSCIENCE

By: J.B. Gupta

(For AMITY University)

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS62

CONTENTS :Unit-I: Transformers• TransformersUnit-II: DC Machines• DC Generators• Operating Characteristics and

Applications of DC Motors• Starting, Speed Control and Testing of

DC MachinesUnit-III: Three Phase Induction Motors• Construction, Theory and Operation of

Three-phase Induction Motors

• Starting and Speed Control of3-phase Induction Motors

Unit-IV: Three-Phase SynchronousMachines• Synchronous Generators or Alternators• Synchronous MotorsUnit-V: Functional Horse Power Motorsand Industrial Applications• Functional Horse Power Motors• Industrial Applications• Model Test Papers• Index

ELECTRICALMACHINES

By: J.B. Gupta

Size : 20 x 30/8Pages : 425 Approx.ISBN : 81-88458-14-7

Price Rs. : 265/-Reprint : 2012

(AC & DC Machines)

CONTENTS :Section-A: DC Network Laws andTheorems• DC Circuits• Network Theorems (Network Analysis)Section-B: Single-Phase AC Circuits• AC Fundamentals• Single-Phase Series Circuits• Complex Notations and Circuit Analysis• Single-Phase Parallel and Series-Parallel

Circuits• Resonance in R-L-C CircuitsSection-C: Three-Phase AC Circuits andTransformers

Size : 20 x 30/8Pages : 575 Approx.ISBN : 978-93-80027-62-3

Price Rs. : 325/-Fourth Edition : 2012

A TEXTBOOK OFELECTRICAL

TECHNOLOGY

By: J.B. Gupta

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-028-4

Price Rs. : 295/-Reprint : 2013

ELECTRICALMACHINES AND

AUTOMATICCONTROL

By: J.B. GuptaS. Hasan Saeed

CONTENTS :Part-I: Electrical MachinesBy J.B. GuptaUnit-I: Transformers and DC Motors• Transformers• DC MotorsUnit-II: AC Generators and Motors• Three-Phase Induction Motors and

Servomotors• Synchronous Machines (Alternator and

Synchronous Motor)Part-II: Automatic ControlBy S. Hasan Saeed

Unit-III: Modelling of Mechanical System,Control System and Signals• Control SystemUnit-IV: Time Response Analysis andStability• Time Response Analysis and StabilityUnit-V: Root Locus Techniques,Frequency Response Analysis andProcess Control• Root Locus• Miscellaneous Problems• Objective Type Questions with Answers• Examination Paper• Index

• Three-Phase AC Circuits• TransformersSection D: Electrical Machines andMeasuring Instruments• DC Machines-I (Generator)• DC Machines-II (Motors)• Three-Phase Induction Motor• Single-Phase Induction Motors• Three-Phase Synchronous Machines• Electrical Measuring Instruments• Transient Response• Lab Practicals• University Papers• Index

CONTENTS :Unit-I: Power System Components, SupplySystem and Transmission Lines• Power System Components• Supply System• Transmission LinesUnit-II: Overhead Transmission Lines• Inductance and Capacitance of Transmission

Lines• Representation and Performance of Short

and Medium Transmission Lines• Representation and Performance of Long

Transmission LinesUnit-III: Corona and Interference Electrostaticand Electromagnetic Interference withCommunication Lines and Overhead LineInsulators

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-043-7

Price Rs. : 265/-Reprint : 2012

ELEMENTS OFPOWER

SYSTEMS

By: J.B. Gupta

• Corona• Electrostatic and Electromagnetic

Interference with Communication Lines• Overhead Line InsulatorsUnit-IV: Mechanical Design of TransmissionLine and Insulated Cables• Mechanical Design of Transmission Lines• Insulated CablesUnit-V: Neutral Grounding and EHVACand HVDC Transmission• Neutral Grounding• Extra High Voltage (EHV) AC Transmission• High Voltage Direct Current (HVDC)

Transmission• University Examination Papers• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS 63

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-105-2

Price Rs. : 240/-Reprint : 2013

POWER SYSTEMANALYSIS

By: J.B. Gupta

CONTENTS :Unit-I: Representation of Power SystemConcepts• Introductory• Representation of Power System

Components• Symmetrical Components• Symmetrical Fault AnalysisUnit-II: Unsymmetrical Faults Analysis• Unsymmetrical Faults AnalysisUnit-III: Load Flows• Load Flows

Unit-IV: Power System Stability• Power System StabilityUnit-V: Travelling Waves• Travelling Waves• Protection Against Travelling Waves• University Examination Papers• Index

ELECTRICALMACHINES-II

By: J.B. Gupta

FUNDAMENTALS OFSWITCHGEAR

ANDPROTECTION

By: J.B. Gupta

CONTENTS :Unit-I: Introduction to Protection Systemand Relays• Introduction to Protection System• RelaysUnit-II: Relay Application andCharacteristics and Static Relays• Relay Application and Characteristics• Static RelaysUnit-III: Protection of Transmission Lines• Protection of Transmission LinesUnit-IV: Circuit Breaking and Testingof Circuit Breakers

• Circuit Breaking• Testing of Circuit BreakerUnit-V: Apparatus Protection andCircuit Breakers• Protection of AC Generators

and Motors• Transformer Protection• Circuit Breakers• University Question Papers• Index

CONTENTS :Section-A: Polyphase Induction Machines• Rotating Magnetic Fields• Construction, Theory and Operation of

Three Phase Induction Machines• Starting and Speed Control of Three

Phase Induction MotorsSection-B: Single Phase Induction Motors• Single Phase Induction MotorsSection-C: Synchronous Generator• Synchronous Generator

Section-D: Synchronous Motor• Synchronous Motors• Model Text Papers• Index

Size : 20 x 30/8Pages : 350 Approx.

ISBN : 978-93-5014-148-9

Price Rs. : 235/-Reprint : 2012

Size : 20 x 30/8Pages : 350 Approx.

ISBN : 978-93-5014-160-1

Price Rs. : 265/-Reprint : 2012

CONTENTS :Section-A:• TransformersSection-B:• Transformers (Continued)Section-C: DC Machines (Generators)• Construction of DC Machines• Armature Reaction and Communication

in DC Machines• Operating Characteristics and

Applications of DC GeneratorsSection-D: DC Machines (Motors)• Operating Characteristics and

Applications of DC Motors

Size : 20 x 30/8Pages : 450 Approx.

ISBN : 978-93-5014-055-0

Price Rs. : 265/-Reprint : 2011

ELECTRICALMACHINES

By: J.B. Gupta

(Vol. 1)

• Speed Control Starting and Brakingof DC Motors

• Losses, Testing and Efficiency of DCMachines

• Model Test Papers• Examination Papers (Solved)• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS64

UTILIZATION OFELECTRICAL

ENERGY ANDTRACTION

By: J.B. GuptaRajeev ManglikRohit Manglik

CONTENTS :Unit-I: Electric Heating• Electric HeatingUnit-II: Electric Welding and ElectrolyticProcesses• Electric Welding• Electrolytic ProcessesUnit-III: Illumination and Refrigerationand Air-Conditioning• Illumination• Refrigeration and Air-conditioningUnit-IV: Electric Traction-I• Traction Systems

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-222-6

Price Rs. : 235/-First Edition : 2012

• Train Movement and EnergyConsumption

Unit-V: Electric Traction-II• Electric Traction Motors• Control of Traction Motors• Braking; Mechanical Considerations and

Control Equipment• Power Supply for Electric Traction• Systems of Electric Traction• Examination Papers• Index

POWER SYSTEMS& PROTECTION

By: N.K. Datta

CONTENTS :• Basics of Power System Growth• Power System’s Electrical Basics• Transmission Line Parameters• Performance of Transmission Line in

Power System• Corona• Overhead Insulators & Underground

Cables• Control of Voltage, Load Frequency

and Power in Transmission System• Essentials of Mechanical Design of

Transmission Line• Extra High Voltage & High Voltage DC• Transients in Power System

• Power System Stability• Load Flow Analysis• Symmetrical and Unsymmetrical Fault

Calculation• Substations• Protection in Power System• Protection of Equipments in Power

System• D.C., A.C. Distribution System• Tariffs & Electricity Energy Audit• Economic Load, Despatch Load

Frequency Control, Compensation• Appendix-I to Appendix IV• Index

Size : 20 x 30/8Pages : 775 Approx.ISBN : 978-93-5014-002-4

Price Rs. : 385/-Second Edition : 2012

THEORY & PRACTICE OFELECTRICALMACHINES

DESIGN

By: N.K. Datta

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. :First Edition : 2013

CONTENTS :• Introduction• Reliability Mathematics• Reliability Data and Analysis• System Reliability and Modelling• Reliability Improvement• Electronic System Reliability• Reliability Testing• Quality Management System and TQC• ISO 9000: Quality Management System• Quality System Assessment• Pareto Principle• SWOT Analysis

Size : 20 x 26/8Pages : 270 Approx.ISBN : 978-93-80027-50-0

Price Rs. : 185/-Third Edition : 2011

RELIABILITYENGINEERINGAND QUALITYMANAGEMENT

By: Onkar N. PandeyBhupesh Aneja

• ISO: 14000 Series• Software Reliability• Appendix• References• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS 65

CONTENTS :• Quality Concept• Total Quality Management (TQM)• Quality by Design• Control of Purchased Product• Manufacturing Quality• Quality Management• Control Charts• Defects Diagnosis and Prevention• ISO 9000 Quality Management System• Taguchi Quality Method and JIT• ISO-14000 Quality Management System• Quality Audit

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-5014-163-2

Price Rs. : 185/-Reprint : 2013

QUALITYMANAGEMENT

By: O.N. PandeyBhupesh Aneja

CONTENTS :• The Design Problem• Materials for Electrical Machines• Heating, Cooling and Ventilation of

Electrical Machines• Magnetic Circuit Calculations• Electromagnets• Electrical Circuits : Armature Windings• Transformer• Three Phase Induction Motor• Single Phase Induction Motor• Synchronous Machines• D.C. Machine

Size : 20 x 30/8Pages : 625 Approx.

ISBN : 978-93-80027-12-8

Price Rs. : 295/-Reprint : 2012

PRINCIPLES OFELECTRICAL

MACHINE DESIGN

By: R.K. Agarwal

• Starters, Field Regulators and AuxiliaryApparatus

• Mechanical Design• Computer Aided Design• Tables of Standard Specifications• Objective Type Questions• Index

• Reliability• Production Planning and Control• Maintenance Functions• General Maintenance• Predictive Maintenance (PDM)• Spare Parts Management• Pareto Principle• Swot Analysis• Value Engineering• Appendices• References• Index

CONTENTS :• An Overview of Engineering Materials• Crystal Structure of Materials• Structural Imperfections• Magnetic Properties of Materials• Conductivity of Metals• Materials for Electrical Engineering• Semiconducting and Superconducting

Materials• Electronic Components• Conceptual Questions and Answers• Tables• Model and Examination Papers• Index

Size : 20 x 26/8Pages : 350 Approx.ISBN : 81-88458-48-1

Price Rs. : 185/-Reprint : 2013

ELECTRICALENGINEERING

MATERIALS

By: Rakesh Dogra

CONTENTS :• Conventional Symbols• Lighting Circuit and Accessories• Light and Fan Circuits• Simple Bell Circuit• Relay Operated Alarm Circuits• Annunciators• Electrical Drawing

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-93-5014-305--6

Price Rs. : 145/-Reprint : 2012

ELECTRICALENGINEERING

DRAWING-I

By: Surjit Singh

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS66

CONTENTS :• Conventional Symbols• Wiring Material for Domestic and

Small Industries Wiring• Wiring Installation in Small Residences• Domestic Wiring Estimates• Power Wiring Estimates for Small

Industries• Consumer’s Installation of Service

Connections• Contactor Control Circuits

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-321-6

Price Rs. : 150/-Reprint : 2013

ELECTRICALENGINEERINGDRAWING-II

By: Surjit Singh

CONTENTS :• Basic Concepts• Essentials of Analog Instruments• Galvanometers, Ammeters and

Voltmeters• Wattmeters & Energy Meters• Polyphase Systems and Measurement

of Power• Measurement of Resistance:

Earth Tester & Meggar• Measurement of Inductance &

Capacitance (AC Bridges)

• Miscellaneous Electrical Instruments• Electronic Instruments• Measurement of Non-Electrical

Quantities Transducers• Short Answer Questions• Solved Question Papers• Practicals• Index

ELECTRICALMEASUREMENTSAND MEASURING

INSTRUMENTS

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-363-6

Price Rs. : 150/-Reprint : 2012 By: M.L. Anand

• Power Distribution Sub-Stations andStations

• Electronic Circuits and Symbols• Earthing Electric Shock• Drawing of Machine Parts

CONTENTS :• DC Circuits• DC Circuit Theorems• Constant Voltage and Constant Current

Sources• Electromagnetic Induction• Batteries• AC Fundamentals• AC Circuits• Various Types of Power Plants• Practicals• IndexSize : 20 x 30/8

Pages : 300 Approx.ISBN : 978-93-5014-031-4

Price Rs. : 175/-Reprint : 2012

BASICELECTRICAL

ENGINEERING

By: Tarlok Singh

CONTENTS :• Inspection & Installation of

Machines• Maintenance• Installation, Commissioning and

Testing of Transmission andDistribution Lines

• Underground Cables• Substations• Accidents• Experiments• Question Paper 2000• Index

Size : 23 x 36/16Pages : 600 Approx.ISBN : 978-93-5014-377-3

81-85749-83-3

Price Rs. : 195/-Reprint : 2013

INSTALLATIONCOMMISSIONING &MAINTENANCE OF

ELECTRICALEQUIPMENTS

By: Tarlok Singh

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS 67

CONTENTS :• Electric Drives• Illumination• Electric Heating• Electric Welding• Electrolytic Processes• Refrigeration and Air Conditioning• Electric Traction• Experiments• Examination Question Papers• Index

Size : 23 x 36/16Pages : 310 Approx.ISBN : 978-93-80027-84-5

Price Rs. : 140/-Reprint : 2012

UTILIZATION OFELECTRICENERGY

By: Tarlok Singh

(Including Electric Drives andElectric Traction)

CONTENTS :• Introduction to Electrical Measuring

Instruments• Measuring Instruments• Miscellaneous Measuring Instruments• Cathode Ray Oscilloscope (CRO)• Power Measurement in 3-Phase Circuit• Transducer• Measurement of Resistance, Inductance

and Capacitance• Practicals• Examination Papers• Index

Size : 20 x 26/8Pages : 225 Approx.

Price Rs. : 115/-Reprint : 2011

ELECTRICALMEASUREMENT

AND MEASURINGINSTRUMENTS

By: Tarlok Singh

For Diploma Students

CONTENTS :• Introduction to Electrical Machines• D.C. Machines• Transformer (Single Phase)• Three Phase Transformer• Solution of Problems• Practicals• State Board Question Papers• Index

Size : 23 x 36/16Pages : 400 Approx.ISBN : 81-85749-58-2

Price Rs. : 135/-Reprint : 2012

ELECTRICALMACHINES-I

By: Tarlok Singh

CONTENTS :• Synchronous Machines• Induction Motors• Fractional K.W. (FKW) Motors• Special Purpose Machines• Solution of Problems• Practicals• State Board Question Papers• Index

Size : 23 x 36/16Pages : 375 Approx.ISBN : 81-85749-58-2

Price Rs. : 125/-Reprint : 2012

ELECTRICALMACHINES-II

By: Tarlok Singh

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS68

CONTENTS :• Three Phase Supply• Transformer• D.C. Motors• Three Phase Induction Motors• Synchronous Motors• Single Phase Motors• Servo Motor and Stepper Motor• Solution of Problem• Practicals• Index

ELECTRICALMACHINES

By: Tarlok Singh

Size : 23 x 36/16Pages : 260 Approx.ISBN : 81-85749-58-2

Price Rs. : 95/-Reprint : 2012

CONTENTS :• Power System Faults• Economics of Generation• Switchgears• Protection Devices• Protection Scheme• Over-voltage Protection• Experiments• Examination Papers• IndexSize : 23 x 36/16

Pages : 225 Approx.ISBN : 81-89757-95-4

Price Rs. : 95/-Reprint : 2012

ELECTRICALPOWER-II

By: Tarlok Singh

(Power System Protection)

CONTENTS :• D.C. Circuits• Batteries• Magnetism and Electromagnetism• Electromagnetic Induction• A.C. Theory• Polyphase Systems• Experiments• Index

Size : 23 x 36/16Pages : 450 Approx.ISBN : 978-93-5014-347-6

Price Rs. : 130/-Reprint : 2012

ELECTRICALSCIENCE

By: Tarlok Singh

CONTENTS :• General Introduction• Measuring Instruments• D.C. Machine (Motors and Generators)• Transformer• Synchronous Machines• Induction Motors• Basic Electronics• Practicals & Experiments

Size : 23 x 36/16Pages : 306 Approx.ISBN : 978-93-5014-348-3

Price Rs. : 115/-Reprint : 2012

ELEMENTS OFELECTRICAL AND

ELECTRONICS

By: Tarlok Singh

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS 69

Size : 20 x 30/8Pages : 275 Approx.ISBN : 978-93-5014-009-3

Price Rs. : 185/-Reprint : 2012

Basic InstrumentationSystem &

PROGRAMMABLELOGIC

CONTROLLER

By: Umesh Rathore

CONTENTS :• Introduction to Instrumentation• Transducers• Signal Conditioning• Output Devices and Displays• Introduction to PLCs• Working of PLC• Instruction Set• Ladder Diagram Programming• Other Programming Languages for PLC• Applications of PLC• Introduction to 8051 Microcontroller• Appendix• Index

CONTENTS :• Main Resources of Energy• Transmission System• Distribution System• Substations• Faults• Power Factor• Various Types of Tariffs• Miscellaneous Questions and Answers• Previous Question Papers• Index

TRANSMISSIONand

DISTRIBUTION

By: Tarlok Singh

(Electrical Power I)

Size : 23 x 36/16Pages : 375 Approx.ISBN : 978-93-5014-398-8

Price Rs. : 150/-Reprint Edition : 2013

Size : 20 x 26/8Pages : 450 Approx.

ISBN : 978-93-5014-101-4

Price Rs. : 210/-Reprint : 2013

ENERGYMANAGEMENT

By: Umesh Rathore

CONTENTS :Chapter-1:Non-Conventional Energy SourcesChapter-2:Energy ManagementChapter-3:Energy ConservationChapter-4:Energy Efficient TechnologyChapter-5:Energy Audit

Chapter-6:Environmental Impact Assessment• Appendix• Index

CONTENTS :• Applications and Advantages of Electrical

Energy• Basic Electric Quantities• Batteries• DC Circuits• Magnetism and Electromagnetism• Electromagnetic Induction• Ac Fundamentals• Polyphase System• Various Types of Power Plants• Laboratory Practicals

Fundamentals ofELECTRICAL

ENGINEERING

By: Tarlok SinghSize : 20 x 30/8Pages : 415 Approx.ISBN : 978-93-5014-068-0

Price Rs. : 175/-First Edition : 2010

• Previous Years Fully Solved QuestionPapers

• Examination Papers• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS70

CONTENTS :• Introduction to Networks• Attenuator• Filters• Transmission Line• Network Theorems• Experiments• Index

Size : 20 x 26/8Pages : 275 Approx.ISBN : 978-93-5014-052-9

Price Rs. : 150/-Second Edition : 2012

NETWORKFILTERS AND

TRANSMISSIONLINES

By: Satish KumarRajesh ChhikaraShamshad Alam

AN INTRODUCTION TO ELECTRICTRACTION

By: Sachidanand MallickRupali G. Nazar

Size : 20 x 26/8Pages : 156 Approx.ISBN :

Price Rs. : 85/-First Edition : 2011

CONTENTS :• Nature of Economics• Cardinal Utility Analysis• Demand• Production• Concept of Cost• Market• Supply• Indian Economy• Index

ENGINEERINGECONOMICS

By: Smriti Srivastava

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-084-0

Price Rs. : 150/-First Edition : 2010

CONTENTS :• Introduction to Traction System• System of Power Supply• Overhead Equipment• Study of Drives• Control of Motors• Electrical Braking• Examination Papers• References• Index

INDUSTRIALINSTRUMENTATION

By: Umesh Rathore

CONTENTS :• Measurements• Transducer• Displacement and Strain Measurement• Measurement of Force, Torque

and Angular Velocity• Pressure Measurement• Flow Measurement• Temperature Measurement• Level Measurement• Measurement of Humidity,

Moisture, Viscosity and pH• Introduction to Control System• Advanced Control Techniques

• Overview of Process Controllers(SCADA, DCS, DAS, Data Loggers)

• Introduction to ProgrammableLogic Controller (PLC)

• Objective Type Questions• Appendix• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-025-3

Price Rs. : 165/-Reprint : 2012

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS

CONTENTS :• Introduction• Reliability Mathematics• Reliability Data, Recovery and Analysis• Reliability• Reliability Improvement• Reliability Testing• Electronic System Reliability• Software Reliability• Total Quality Management (TQM)• Quality Management System• ISO 9000: Quality Management System• Quality System Assessment• General Maintenance

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-218-9

Price Rs. : 165/-First Edition : 2012

RELIABILITYENGINEERING

By: Onkar N. PandeyBhupesh Aneja

71

CONTENTS :• Development of Indian Power Sector

and Grid Management• Distribution of Power• Sub-Station• Power Transformers• Reactive Power Management• Fundamentals of Earthing and Design of

Earthmat• Load Management• Capacitor Banks• Over Head Insulators• Current Transormers• Voltage Transformers• Station Battery and Charging Equipment• Economics Operation of Power System• Supply System• HVDC• Power System Stabilities• Computer Application-with Sub-Station

Engineering

Size : 20 x 30/8Pages : 750 Approx.ISBN : 978-93-80027-57-9

Price Rs. : 375/-Reprint : 2013

SUB-STATIONENGINEERING

DESIGN,CONCEPTS &COMPUTER

APPLICATIONS

By: Er. R.S. DahiyaEr. Vinay Attri

• Voltage Control and Voltage Stability• Circuit Breakers• Fuse• Transmission Line Design• Protection Against Overvoltage• Bus-Bar Protection• Protective Relays• Calculation of Short Circuit Current• System Restoration Process / Black Start

Procedure• Generation of Electric Power• Introduction to IEGC• Technical Standards for Construction of

Sub-Stations• Substation Automation System (SAS)• Management of Distribution and

Transmission Network Using GIS• Gas Insulation Substation• Appendix• Bibliography• Index

• Predictive Maintenance (PDM)• Pareto Principle• Swot Analysis• ISO: 14000 Series• Value Engineering• Appendices• Index

SPECIALELECTRICALMACHINES

By: Simmi P. Burman

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-262-2

Price Rs. : 170/-Second Edition : 2013

CONTENTS :• Poly-phase AC Machines• Single Phase Induction Motors• Stepper Motors and Switched

Reluctance Motors• Permanent Magnet Generators• Single Phase Commutator Motors• Model Papers• Examination Paper• Index

ELECTRICAL ENGINEERING

S.K. KATARIA & SONS72

Size : 20 x 26/8Pages : 350 Approx.ISBN :

Price Rs. : 195/-First Edition : 2013

EHVAC & D.C.TRANSMISSION

By: Simmi P. Burman

HIGH VOLTAGEENGINEERING

By: Simmi P. BurmanNikita Gupta

CONTENTS :• Introduction• Breakdown in Gases• Generation of High D.C. Voltage• Measurement of High Direct Current

Voltages• Lighting Phenomenon-as Natural Cause

for Overvoltage• Non-Destructive Testing and High

Voltage Testing• Model Test Papers• Previous Year Examination Paper• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-393-3

Price Rs. : 140/-First Edition: 2013

EHV-AC, HVDCTRANSMISSION

ANDDISTRIBUTIONENGINEERING

By: Sanjay Sharma

Size : 20 x 26/8Pages : 400 Approx.ISBN :

Price Rs. : 225/-First Edition : 2013

By: V.K. Maurya

CONVENTIONALAND COMPUTER

AIDED DESIGN OFELECTRICAL

MACHINE

Size : 20 x 26/8Pages : 300 Approx.ISBN :

Price Rs. : 175/-First Edition : 2013

POWERQUALITY

By: Simmi P. Burman

Size : 20 x 26/8Pages : 300 Approx.ISBN :

Price Rs. : 195/-First Edition : 2013

MECHANICAL ENGINEERING

S.K. KATARIA & SONS

CONTENTS :• Basic Concepts & Definitions• Temperature and Zeroth Law of

Thermodynamics• Transient Energies : Work and Heat• Ideal Gases and their Basic Laws• First Law of Thermodynamics• Steady Flow Energy Equation

(Flow Processes and Ist Law)• Second Law of Thermodynamics• Entropy• Availability and Irreversibility• Mixture of Gases• Thermodynamic Relations

• Gas Power Cycle• Internal Combustion Engines• Steam and its Properties• Thermodynamic Vapour Cycles• Refrigeration Systems and Psychrometry• Fuels and Combustion• Thermodynamics of Fluid Flow

(One-Dimensional)• Appendix• Supplement A: Multiple Choice

Questions• Supplement B: Fill in the Blanks• Index

THERMALSCIENCE ANDENGINEERING

CONTENTS :• Introduction• Physical Properties of Fluids• Fluid Statics• Fluid Kinematics• Fluid Dynamics (Momentum and Energy

Principles)• Dimensional Analysis and Model

Similitude• Potential Flow• Laminar Viscous Flow• Turbulence and Turbulent Flow through

Pipes

Size : 20 x 30/8Pages : 1050 Approx.ISBN : 978-93-5014-392-6

81-85749-18-3

Price Rs. : 495/-Eighth Edition : 2013

FLUIDMECHANICS and

FLUID POWERENGINEERING

73

By: Dr. D.S. Kumar

By: Dr. D.S. Kumar

• Laminar and Turbulent Boundary LayerFlows

• Flow around Immersed Bodies: Dragand Lift

• Flow in Open Channels• Compressible Flow• Fluid Measurements• Impact of Free Jets• Hydraulic Turbines• Hydraulic Pumps• Hydraulic Systems• Bibliography• Index

Size : 20 x 30/8Pages : 775 Approx.ISBN : 81-85749-46-9

Price Rs. : 295/-Reprint : 2012

(Two Colour Edition)(SI Units)

CONTENTS :• Definitions and Basic Concepts• Fourier Equation and Thermal

Conductivity• Steady State Conduction• Conduction with Heat Generation• Heat Transfer from Extended Surfaces• Transient (Unsteady State) Heat

Conduction• Radiation: Processes and Properties• Radiation Exchange Between Surfaces• Convection: Processes and Properties

• Empirical Correlations for free andForced Convection

• Hydrodynamic and Thermal BoundaryLayers

• Condensation and Boiling• Heat Exchangers• Mass Transfer• Bibliography• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-060-4

Price Rs. : 265/-Reprint : 2011

BASICS OFHEAT AND MASS

TRANSFER

By: Dr. D.S. Kumar

Size : 20 x 30/8Pages : 900 Approx.ISBN : 978-93-5014-269-1

81-85749-90-6

Price Rs. : 415/-Reprint : 2012

CONTENTS :• Definitions and Basic Concepts• Fourier Equation and Thermal

Conductivity• Steady State Conduction• Conduction with Heat Generation• Heat Transfer from Extended Surfaces• Transient (Unsteady State) Heat

Conduction• Radiation: Processes and Properties• Radiation Exchange between Surfaces• Convection : Process and Properties• Dimensional Analysis

HEAT & MASSTRANSFER

By: Dr. D.S. Kumar

• Empirical Correlations for Free andForced Convection

• Hydrodynamic and Thermal BoundaryLayers

• Condensation and Boiling• Heat Exchangers• Mass Transfer• Appendices• Bibliography• Index

(Two Colour Edition)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS74

CONTENTS :Part-I: Thermodynamics• Basic Concepts & Definitions• Temperature and Zeroth Law of

Thermodynamics• Transient Energies : Work and Heat• Ideal Gases and their Basic Laws• First Law of Thermodynamics• Steady Flow Energy Equation• Second Law of Thermodynamics• Entropy • Availability and IrreversibilityPart-II: Properties of Steam andThermodynamic Cycles• Steam and its Properties• Gas Power Cycle• Internal Combustion Engines

• Thermodynamic Vapour CyclesPart-III: Mechanics• Basic Concepts • Co-Planar Forces• Moment of Force and Parallel Forces• Friction• Shear Force and Bending Moment• Plane Trusses and Frames• Dynamics : Kinematics and KineticsPart-IV: Strength of Materials• Simple Stresses and Strains• Compound Stresses and Strains• Bending Stresses in Beams• Torsion of Circular Shafts• Experiments• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 850 Approx.ISBN : 81-85749-35-3

Price Rs. : 375/-Reprint : 2012

MECHANICALENGINEERING(WITH EXPERIMENTS)

By: Dr. D.S. Kumar

CONTENTS :• Basic Concepts and Laws of

Thermodynamics• Steam and its Properties• Refrigeration Systems and Psychrometry• Hydraulic Turbines and Pumps• Power Transmission: Methods and

Devices• Stresses and Strains• Basic Machine Tools• Index

Size : 20 x 30/8Pages : 490 Approx.ISBN : 978-93-80027-63-0

Price Rs. : 250/-Reprint : 2012

BASICS OFMECHANICALENGINEERING

CONTENTS :• Basic Concepts and Laws of

Thermodynamics• Steam and its Properties• Steam Boilers Mountings and Accessories• Internal Combustion Engines• Steam Turbines and Condensers• Hydraulic Turbines and Pumps• Power Transmission: Methods and

Devices• Stresses and Strains• Shear Force and Bending Moment

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-80027-77-7

Price Rs. : 315/-Reprint : 2012

BASICS OFMECHANICALENGINEERING

CONTENTS :• Engineering Material and their Properties• Measurement and Instrumentation• Basic Machine Tools• Fluid Mechanics• Fluid Machines• Basic Concepts and Laws of

Thermodynamics• Steam and its Properties• Steam Boilers, Mountings and

Accessories• Boiler Drought and Boiler Performance

Size : 20 x 30/8Pages : 460 Approx.ISBN : 978-93-80027-59-3

Price Rs. : 250/-Reprint : 2012

BASICS OFMECHANICALENGINEERING

By: Dr. D.S. Kumar

By: Dr. D.S. Kumar

By: Dr. D.S. Kumar

(For MDU)

• Principles of Mechanics• Engineering Materials and

Manufacturing Process• Index

(For RGTU)

• Refrigeration Systems• Steam Engines• Internal Combustion Engines• Index

(For MRIU)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 75

CONTENTS :• Basic Concepts & Definitions• Temperature and Zeroth Law of

Thermodynamics• Transient Energies: Work and Head• Ideal Gases and their Basic Laws• First Law of Thermodynamics• Steady Flow Energy Equation (Flow

Processes and 1st Law)• Second Law of Thermodynamics• Entropy• Availability and Irreversibility• Mixture of Gases• Internal Combustion Engines• Steam and its Properties• Thermodynamic Vapour Cycles• Index

Size : 20 x 30/8Pages : 490 Approx.ISBN : 978-93-80027-66-1

Price Rs. : 275/-Reprint : 2012

THERMODYNAMICS

By: D.S. Kumar

CONTENTS :• Basic Concepts & Law of

Thermodynamics• Steam and its Properties• Vapour Power Cycles• Steam Turbines• Gas Power Cycles and IC Engines• Compressed Air: Positive Displacement

and Dynamic Compressors• Gas Turbines• Impact of Free Jets• Hydraulic Turbines• Hydraulic Pumps• Index

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-067-3

Price Rs. : 285/-Reprint : 2012

THERMAL ANDHYDRAULICMACHINES

By: D.S. Kumar

CONTENTS :• Introduction• Physical Properties of Fluids• Fluid Statics• Fluid Kinematics• Fluid Dynamics (Momentum and Energy

Principles)• Dimensional Analysis and Model Similitude,• Potential Flow• Laminar Viscous Flow• Turbulence and Turbulent Flow Through

Pipes

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-80027-65-4

Price Rs. : 295/-Reprint : 2012

FLUIDMECHANICS

By: D.S. Kumar

• Laminar and Turbulent BoundaryLayer Flows

• Flow Around Immersed Bodies: Dragand Lift

• Fluid Measurements• Index

CONTENTS :Section-A• Basic Concepts and Definitions• Temperature and Zeroth Law of

Thermodynamics• Transient Energies: Work and Heat• Ideal Gases and their Basic Laws• First Law of Thermodynamics• Steady Flow Energy Equation (Flow Process and Ist Law)

Section-B• Second Law of Thermodynamics

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-380-3

Price Rs. : 295/-First Edition : 2013

BASICMECHANICALENGINEERING

(HPTU)

By: D.S. Kumar

• Entropy• Availability and Irreversibility• Steam and its PropertiesSection-C• Gas Power Cycles• Internal Combustion Engines

Section-D• Psychrometry• Heat Transfer• Fluid Mechanics• Index

(Two Colour Edition)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS76

CONTENTS :• Basic Concepts• Co-planar Forces• Moment of Force and Parallel Forces• Concurrent Forces in Space• Plane Trusses and Frames• Cables and Strings• Centre Points : Centroid and Centre of

Gravity• Moment of Inertia : Area and Mass• Friction• Lifting Machines• Shear Force and Bending Moment• Virtual Work

Size : 20 x 30/8Pages : 750 Approx.ISBN : 978-93-5014-2-92-9

81-88458-16-3

Price Rs. : 415/-Fourth Edition : 2012

ENGINEERINGMECHANICS

By: Dr. D.S. Kumar

Dynamics: Kinematics and Kinetics• Rectilinear and Curvilinear Motion• Projectiles• Rotation and General Plane Motion• Simple Harmonic Motion and Vibrations• Impact : Collision of Elastic Bodies• Kinetics; Impulse, Momentum, Work

and Energy• Kinetics of Rotary Motion• Power Transmission: Methods and

Devices• Appendix• Index

(Statics & Dynamics)

CONTENTS :• Basic Concepts• Co-Planar Forces• Moment of Force and Parallel Forces• Friction• Shear Force and Bending Moment• Plane Trusses and Farms• Centroid and Centre of Gravity• Moment of Intertia: Area and Mass• Rectilinear Motion• Rotation and General Plane Motion• Kinetics: Impulse, Momentum,

Work and Energy

ENGINEERINGMECHANICS

By: Dr. D.S. Kumar

(For UPTU)(With Experiments)

• Kinetics of Rotary Motion• Simple Stresses and Strains• Bending Stresses in Beams• Torsion of Circular Shafts• Experiments• Objective Type Questions• Index

CONTENTS :• Steam and its Properties• Steam Boilers, Mountings and

Accessories• Steam Turbines and Condensers• Gas Power Cycles• Internal Combustion Engines• Hydraulic Turbines, Pumps and Devices• Lifting Machines• Power Transmission : Methods and

Devices

ELEMENTS OFMECHANICALENGINEERING

By: Dr. D.S. Kumar

• Simple Stresses and Strains• Compound Stresses and Strains• Shear Force and Bending Moment• Index

Size : 20 x 30/8Pages : 550 Approx.ISBN : 81-88458-44-9

Price Rs. : 300/-Reprint : 2012

(KU)

CONTENTS :Part-I: Thermodynamics• Basic Concepts & Definitions• Temperature and Zeroth Law of

Thermodynamics• Transient Energies : Work and Heat• Ideal Gases and their Basic Laws• First Law of Thermodynamics• Steady Flow Energy Equation

(Flow Processes and 1st Law)• Second Law of Thermodynamics• Entropy

• Availability and IrreversibilityPart-II: Gas Power Cycles and InternalCombustion Engines• Gas Power Cycles• Internal Combustion EnginesPart-III: Mechanics of Solids• Simple Stresses and StrainsPart-IV: Engineering Materials• Engineering Materials and Their

Properties• Index

ELEMENTS OFMECHANICALENGINEERING

By: Dr. D.S. Kumar

(For PTU)

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-158-8

81-88458-07-4

Price Rs. : 315/-Reprint : 2013

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-320-9

81-88458-23-6

Price Rs. : 350/-Reprint : 2012

(Two Colour Edition)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 77

STEAM AND POWERGENERATION

By: Dr. D.S. Kumar

CONTENTS :• Steam and its Properties• Steam Boilers, Mountings and

Accessories• Boiler Drought and Boiler Performance• Vapour Power Cycles• Steam Engines• Flow Through Nozzles• Steam Turbines• Steam Condensers• Fuels and Combustion• Index

APPLIEDTHERMODYNAMICS

By: Dr. D.S. Kumar

CONTENTS :• Basic Concepts and Laws of

Thermodynamics• Availability and Irreversibility• Thermodynamic Relations• Fuels and Combuston• Steam and its Properties• Steam Boilers, Mountings and

Accessories• Boiler Drought and Boiler Performance• Vapour Power Cycles• Steam Engines

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-098-7

Price Rs. : 250/-Reprint : 2012

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-021-5

Price Rs. : 275/-Reprint : 2013

• Flow Through Nozzles• Steam Turbines• Steam Condensers• Gas Turbines and Jet Propulsion• Index

Size : 23 x 36/8Pages : 875 Approx.ISBN : 978-93-5014-150-2

81-88458-21-X

Price Rs. : 475/-Sixth Edition : 2012

MECHANICALENGINEERING

(OBJECTIVE)

By: Dr. D.S. Kumar

For Competitive Examinations

CONTENTS :• Engineering Mechanics• Strength of Materials• Theory of Mechanisms and Machines• General Metallurgy & Engineering

Materials• Machine Design• Production Engineering• Industrial Engineering and Products

Management• Measurements and Instrumentation• Basic Thermodynamics

• Heat Transfer• Refrigeration and Air-Conditioning• Steam: Generation, Engines and Turbines• I.C. Engines & Automobile Engineering• Compressors, Gas Turbines and Jet

Propulsion• Nuclear Power Plants• Fluid Mechanics and Hydraulic Machines• Assertion and Reasoning• Practice Papers

A TEXTBOOK OFENGINEERINGMECHANICS

By: Dr. D.S. Kumar

CONTENTS :Unit-I:• Basic Concepts• Two-Dimensional Con-current Force

SystemsUnit-II:• Two-dimensional Non-Concurrent

Force Systems• Friction• Structure: Trusses and FramesUnit-III:• Centre Points: Centroid and Centre of

Gravity

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-311-7

Price Rs. : 365/-Fourth Edition : 2012

• Moment of Inertia: Area and MassUnit-IV:• Rectilinear and Curvilinear Motion• Rotation and General Plane MotionUnit-V:• Kinetics: Impulse, Momentum,

Work and Energy• Kinetics of Rotary Motion• Experiments• Index

(Two Colour Edition)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS78

ISO 9000to

OHAS 18001

By: Dr. K.C. Arora

[ISO 9000 (2000),ISO 10006,

11, 12, 13, ISO 14,000,SA 8000, ISO 2859,

ISO 16949, OHSAS 18001,Six Sigma etc.]

• ISO 9004 (1994 & 2000)• ISO 9004-1 : 1994• ISO 9004-2 (1991) Part-2 Guidelines for

Services• Quality Management and Quality System

Elements Part 3 Guidelines for ProcessedMaterials ISO 9004-3 : 1993

• ISO 9004-4 (1993) Quality Managementand Quality System Elements Part 4Guidelines for Quality Improvement

• ISO 9004-5• ISO 9004-7• QS 9000 for Automobile Industries (1998)• ISO 10006-1997 Quality Management–

Guidelines to Quality in ProjectManagement

• ISO 10011 : 1990 Guidelines for AuditingQuality Systems

• ISO 10012-1 : 1992 Quality AssuranceRequirements for Measuring Equipment

• ISO 10013 Guidelines for DevelopingQuality Manuals

• Beyond ISO 9000 Horizon-Adding Valuefor Customers

• TQEM, Environment Management System• ISO 14001 Environmental Management

Systems : General Guide Line onPrinciples, Systems & SupportingTechniques

• ISO 14001 & Cleaner ProductionTechnology

• Guidelines for Designing andImplementation EMS

• Environmental Labeling• Life Cycle Assessment ISO 14040 to

ISO 14043• ISO 14060• Environmental Impact Assessment• Social Accountability (SA) 8000

ENGINEERINGTHERMODYNAMICS(Principles & Practices)

By: Dr. D.S. Kumar

CONTENTS :• Basic Concepts and Definitions• Temperature and Zeroth Law of

Thermodynamics• Transient Energies : Work and Heat• Ideal and Real Gases• Mixture of Gases• First Law of Thermodynamics• Steady Flow Energy Equation (Flow

Process and 1st Law)• Second Law of Thermodynamics• Entropy• Availability and Irreversibility• Thermodynamic Relations• Gas Power Cycles• Steam and its Properties• Steam Boilers, Mountings and

Accessories• Boiler Draught and Boiler Performance• Vapour Power Cycles

• Steam Engines• Flow through Nozzles• Compressed Air : Positive Displacement

and Dynamic Compressors• Internal Combustion Engines• Gas Turbines and Jet Propulsion• Fuels and Combustion• Refrigeration Systems and Psychrometry• Heat Transfer• Index

Size : 20 x 30/8Pages : 1200 Approx.ISBN : 978-93-5014-366-7

81-88458-39-2

Price Rs. : 595/-Reprint : 2012

• Process Safety Code, Employee Healthand Safety Code & Responsible Care forChemical Manufacturers

• Occupational Health and Safety• Occupational Health and Safety

Management System : British Standard-BS8800-196

• Occupational Health and SafetyAssessment Series : OHSAS 18001

• Establishing Information Network onOccupational Health and Safety

• Recent Legislations and GovernmentAction Programmes on HazardousChemicals Management

• Environmental Audit• Aituc’s Guidelines on ‘SHE’• Hazardous Sustenances• Environmental, Health and Safety

System of Compact• National Environment Appellate

Authority Act, 1997• Threshold Limit Values of Concentration

of Chemical in Air• Biological & Medical Monitoring• Control Methods or Hazards• Mode of Action of Hazards in Factories• ISO 2859• Low Waste Technologies• Six Sigma Quality Concept• Making the Transition from QS-9000 to

ISO/TS 16949 (2002)• Six Sigma & Process Simulation• Putting the Wraps on Non-conforming

Products• Appendices• Index

Size : 20 x 30/8Pages : 1000 Approx.ISBN : 978-93-5014-273-8

Price Rs. : 495/-Reprint : 2013

CONTENTS :• ISO 9000:2000• ISO 9000-1 (1994) Quality

Management and QualityAssurance Standards

• ISO 9000-2 (1997) QualityManagement and QualityAssurance Standards

• ISO 9000-3 (1997)• ISO 9000-4 : 1993 Quality

Management and QualityAssurance Standards

• ISO 9001 (1994 & 2000)• ISO 9002 (1994)• ISO 9003 (1994)• Documenting the Quality

System• A Basic Guide to

Implementing ISO 9000• Special Requirements for the

Implementation of ISO 9000System in SpecificOrganizations

(Two Colour Edition)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 79

CONTENTS :• Manual Drawing Instruments• Conventional Lines, Drawing Sheets-

Their Layout and Planning• Technical Lettering, Dimensioning and

Geometrical Constructions• Scales• Loci and Mechanisms• Loci-conic Sections• Cycloidal and Spiral Curves• Helix, Helical Springs and Screw Threads• Projections of Points• Projections of Lines• Projections of Planes and Laminae

Size : 22 x 30/8Pages : 690 Approx.ISBN : 978-93-5014-315-5

81-85749-62-0

Price Rs. : 350/-Eleventh Edition : 2012

ENGINEERINGDRAWING

By: P.S. Gill

CONTENTS :• Introduction to Non-Conventional

Energy Resources• Geothermal Energy• Solar Cells• Solar Thermal Energy• Solar Photovoltaics• Magneto-Hydrodynamics (MHD) Power

Generation• Fuel Cells• Thermo-Electrical and Thermionic

Conversions

NON-CONVENTIONAL

ENERGYRESOURCES

By: S. Hasan SaeedD. K. Sharma

• Auxiliary Planes and Views• Projections of Solids• Sections of Solids• Developments of Surfaces• Intersections of Surfaces• Isometric Projection• Theory of Orthographic Projections• Reading a Drawing-Missing Lines and

Missing Views• Oblique Projections• Perspective Projections• Index

• Wind Energy• Bio-Energy-Biomass and Biogas• Ocean Thermal Energy Conversion

(OTEC)• Ocean Wave Energy and Tidal Energy• Energy Storage• Energy Management System• Appendices• Photos• Model Question Papers• Index

By: Dr. K.C. Arora

CONTENTS :• Introduction to ISO 9000 and Total

Quality Management–Taguchi Methods• Quality Control, Total Quality Control• Customer Focus• Total Waste Elimination• TQM Gurus• Total Employees Involvement• Quality Assurance System• Quality of Product Design and

Development• Quality of Conformance• Continuous Quality Improvement

Engineering• Corporate Quality Awards• ISO 9000-2000• ISO 9001 (2000)• ISO 9004 (2000)• ISO 14000 & ISO 14001• Transition from QS 9000 to ISO/TS

16949-2002• Six Sigma• Non-Destructive Testing• Diagnostic Maintenance and Condition

Monitoring• Signature Analysis and Technical

Diagnostics• ISO 15489-Managing Business Records• TL 900 Business Excellence

Acceleration Model in Telecom• Mining the TQM Motherload• Planning Process• Mission Statement• Joint ISO-ILAC-IAF Communique-

ISO 17025:2005• Lean Six Sigma• ISO 2000• Occupational Health & Safety

Management: OHSAS 18001• Previous Year Question Papers• Index

TOTAL QUALITYMANAGEMENT

• Inspection and Measurement(ISO/7025)

• Quality in ServiceOrganization

• Quality Circles, ShopImprovement Group and SelfManaging Work Teams

• Benchmarking• TQM for Sales and Marketing

Management• Business Process

Reengineering andInformation Technology

• SQC & SPC

• Quality of After Sales Service• Terotechnology and Product Quality• Role of People in Quality Improvement• Reliability as a Quality Characteristics• Quality Leadership• Quality Linked Productivity• Process Management for Improving Quality• ERP and Supply Chain Management• Value Engg/Analysis and Management• Cost of Quality or Quality Cost• Quantum Quality or Quality

Transformation• Quality Control for Export Units• The Quality Revolution• Concurrent Engineering• Team Building• Quality Maturity• Quality Discipline• Quality Repay• Design of Experiments• Achieving Total Commitment to Quality• Problem Solving Methodology for Quality

Improvement• Standardization and its Relevance on

Quality Systems• Planning Process for TQM Implementation• Managing Change• Total Safety System for TQM• Quality Information Equipments

Size : 20 x 30/8Pages : 1350 Approx.ISBN : 81-85749-99-X

Price Rs. : 475/-Reprint : 2012

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-5014-228-8

81-89757-24-5

Price Rs. : 195/-Reprint : 2013

MECHANICAL ENGINEERING

S.K. KATARIA & SONS80

CONTENTS :Part-I: Geometric Dimensioning andTolerancing• Theory of Co-ordinate Dimensioning• Machining Symbols and Surface Texture• Theory of Coordinate Tolerancing• Introduction to Geometric Dimensioning

& Tolerancing• Geometric Tolerancing - Basic Concepts• Datums, Datum Targets & Datum

System• Tolerances of Form• Orientation Controls

Size : 20 x 30/8Pages : 975 Approx.ISBN : 978-93-5014-378-0

81-88458-80-5

Price Rs. : 1295/-Second Edition : 2013

GEOMETRICDIMENSIONING

andTOLERANCING

By: P. S. Gill

(INCLUDING TOLERANCE STACKUPS)

Size : 20 x 30/8Pages : 160 Approx.

Price Rs. : 100/-Reprint : 2002

GRAPHICSTATICS

CONTENTS :• Basic Concepts• Centre of Gravity-Centroid• Supports and Support Reactions• Stresses in Plane Framed Structures• Moment, Moment of Intertia-Second

Moment of Areas• Bending Moment and Shear Force

Diagrams• Space Frames

By: P.S. Gill

CONTENTS :• Drawing Instruments• Conventional Lines, Drawing Sheets—

Their Layout and Planning• Technical Lettering• Scales• Loci and Mechanisms• Loci-Conic Sections• Cycloidal and Spiral Curves• Helix, Helical Springs and Screw Threads• Projections of Points• Projections of Lines• Projections of Planes and Laminae• Auxiliary Planes and Views• Projections of Solids• Sections of Solids

• Development of Surfaces• Intersections of Surfaces• Isometric Projection• Theory of Coordinate Dimensioning• Theory of Orthographic Projections• Reading a Drawing-Missing Lines &

Missing Views• Oblique Projection• Perspective Projection• Freehand Drafting• Sections and Conventions• Rivets and Riveted Joints• Welds and Welded Joints• Screw Threads and Threaded Fasteners• Previous Years Question Papers

Size : 22 x 30/8Pages : 850 Approx.ISBN : 81-85749-61-2

Price Rs. : 395/-Reprint : 2013

By: P. S. Gill

CONTENTS :• Drafting Equipment• Conventional Lines, Drawing Sheets–

Their Layout and Planning• Technical Lettering• Theory of Orthographics Projections• Theory of Co-ordinate Dimensioning• Isometric Projection• Reading a Drawing-missing Lines and

Missing Views• Oblique Projection• Auxiliary Projections• Freehand Drafting• Sections and Conventions• Machining Symbols and Surface Texture• Theory of Conventional Tolerancing• Geometric Dimensioning and Tolerancing

• Detail & Assembly Drawings-WoodenJoints

• Rivets and Riveted Joints• Welds and Welded Joints• Screw Threads and Threaded Fasteners• Keys, Cotters and Joints• Shaft Coupling• Pipe Joints and Fittings• Pulleys• Bearings, Hangers and Brackets• Valves and Cocks• Steam Engine Parts• Cams• Toothed Gears• Automotive Parts• Miscellaneous Machine Parts

Size : 22 x 30/8Pages : 725 Approx.ISBN : 81-85749-79-5

Price Rs. : 340/-Reprint : 2013

MACHINEDRAWING

By: P.S. Gill

ENGINEERINGGRAPHICS and

DRAFTING

• Profile Tolerances• Tolerances of Location• Runout Controls

Part-II: Tolerance Stacks• Tolerance Stacks

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 81

Size : 20 x 30/8Pages : 1100 Approx.ISBN : 978-93-5014-281-3

81-85749-09-4

Price Rs. : 425/-Twelfth Edition : 2012

A TEXTBOOK OFMACHINEDESIGN

(SI UNITS)

By: Dr. P.C. SharmaDr. D.K. Aggarwal

Section-III: Power Transmission General• Shafts and Axles• Bearings• Clutches and Brakes• Belt Drives• Rope Drive• Chain Drives• Gear Drives• Power ScrewsSection-IV: Pressure Vessels General• Cylinders, Pipes and Tubes• Cylinder Heads and Cover PlatesSection-V: I.C. Engine Parts• General Design• Design of Principal PartsSection-VI: Miscellaneous Topics• Miscellaneous Topics• Appendix I• Appendix II• Appendix III• Index

CONTENTS :Section-I: General• Introduction• Engineering Materials• Stress Analysis• Designing for Strength• Manufacturing Considerations

in Design• Sales and GasketsSection-II: Fasteners• Riveted Joints• Welded Joints• Threaded Joints• Eccentric Loading of Riveted,

Welded and Threaded Joints• Cotter and Knuckle Joints• Keys and Couplings• Pipe Joints• Levers• Springs

Size : 20 x 30/8Pages : 615 Approx.ISBN : 978-93-5014-276-9

Price Rs. : 350/-First Edition : 2012

A TEXTBOOK OFAUTOMOBILE

ENGINEERING-III

By: P.S. Gill

CONTENTS :• Tools of Automotive Trade• Fasteners, Gaskets, Seals, Hoses and Belts• Service Information, Tools and Shop Safety• Cooling and Lubrication Systems Diagnosis

and Service• Starting and Charging Systems Diagnosis

and Service• Carbureted-Fuel-System Diagnosis and

Service• Fuel-Injection Systems Diagnosis and

Service• Ignition Systems Diagnosis and Service• Engine Condition Diagnosis and

Tune-up

• Engine Performance and MechanicalProblems

• Engine Removal, Disassembly andCleaning

• Engine Reconditioning -Short Block Service

• Energy Reconditioning• Front End - Timing Mechanism Service• Engine Reassembly -

Installation - Break-in• Engine Maintenance and

Troubleshooting• Bibliography• Index

Size : 20 x 30/8Pages : 872 Approx.ISBN : 978-93-5014-041-3

Price Rs. : 350/-Second Edition : 2012

A TEXTBOOK OFAUTOMOBILE

ENGINEERING-1

By: P.S. Gill

CONTENTS :• General Principles of Heat

Engine Operation• Fundamentals of Electricity,

Magnetism and Electronics• Engine Types & Engine Balance• Constructional Details of Automotive

Engines-Structure & Mechanism• Automotive Engine Lubrication• Exhaust System• Engine Cooling System• Fuels & Fuel Supply System of

Spark Ignition Engines• Process of Combustion in

Spark Ignition Engines

• Carburation & Fuel InjectionSystems in SI Engines

• Ignition Systems• Diesel (Compression Ignition-CI) Engine• Alternate Automotive Engines• Turbocharging & Supercharging Systems• IC Engine Testing and Performance• Storage Battery• Starting Systems• Charging System• Engine Emission Control Systems• Bibliography• Papers• Index

Size : 20 x 30/8Pages : 874 Approx.ISBN : 978-93-5014-042-0

Price Rs. : 350/-Second Edition : 2012

A TEXTBOOK OFAUTOMOBILE

ENGINEERING-1I

By: P.S. Gill

CONTENTS :• Automobile - Development, Operation,

Components & Types• Clutches• Manual Transmissions• Automatic Transmission and Transaxle

Fundamentals• Automotive Torque Converters• Transaxles• Transfer Cases and Four-Wheel Drive

Systems• Driveline - Universal Joints, Differentials,

& Driving Axles• The Basic Structure

• Suspension Systems• Front Axle & Steering System• Wheels & Tyres• Brake Systems• Automotive Vehicle Propulsion

Performance• Lighting Systems• Safety & Comfort Systems• Accessories• Heating, Ventilation & Air Conditioning• Bibliography• Papers• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS82

Size : 23 x 36/16Pages : 400 Approx.ISBN : 81-85749-59-0

Price Rs. : 185/-Reprint : 2012

A Textbook ofINDUSTRIAL

MANAGEMENT

CONTENTS :• Principles of Management• Human and Industrial Relation• Professional Ethics• Motivation• Leadership• Communication• Human Resource Development (HRD)• Wage Payment• Labour, Industrial and Tax Laws• Accidents and SafetyBy: A.P. Verma

N. Mohan

• Environmental Engineering• Entrepreneurship• Business Organisations• Standards and Codes• Technicians• Marketing Management• Financial Management• Personnel Management• Examination Papers• Index

Size : 20 x 30/8Pages : 825 Approx.ISBN : 81-85749-71-X

Price Rs. : 340/-Reprint : 2012

INDUSTRIALENGINEERING and

MANAGEMENT

By: A.P. Verma

CONTENTS :• Introduction to Industrial Engineering,

Production and Operations ManagementFunction

• Facilities Location, Plant Layout, MaterialHandling and Capacity Planning

• Work Study• Value Engineering• Work Design• Ergonomics• Production and Productivity• Production Planning and Control• Inspection and Quality Control• Wages and Incentives• Operations Research• Job Evaluation and Merit Rating• Industrial Organisation• Industrial Ownership• Factory Legislation-India

• Manpowers Planning and Control• Replacement Analysis• Cost Accounting, Sales Management

and Financial Control• Break-Even Analysis• Purchasing, Stores and Storekeeping,

Codification and Standardization• Maintenance Management and

Waste Control• Accidents and Safety (Industrial Safety

and Housekeeping)• Environmental Engineering• Entrepreneurship• Sales Forecasting• Supply Chain Management• Appendix• Index

Size : 20 x 30/8Pages : 1200 Approx.ISBN : 81-85749-24-8

Price Rs. : 350/-Reprint : 2012

OPERATIONSRESEARCH

By: A.P. Verma

CONTENTS :• Introduction to Operations Research• Linear Programming Problems : Formulation

& Graphical Solution• Simplex Method• Transportation Problems• Assignment Problems• Duality in Linear Programming• Revised Simplex Method and Bounded

Variable Technique• Sensitivity Analysis (Post Optimal Analysis)• Goal Programming and Integer Programming• Dynamic Programming• Non-Linear Programming• Probability Theory & Markov Analysis• Sequencing Models• Decision Analysis

• Game Theory (Competitive Strategies)• Queening Models• Inventory Management• Replacement Problems &

Reliability Theory• Simulation• Network Models• CPM abd PERT• Resources Allocation and Scheduling• Information Theory• Geometric Programming & Fractional

Programming• Select Bibliography• Appendices• Index• Index of Some Typical Problems of OR

CONTENTS :• Introduction to the Subject and SI Units• Simple Stresses and Strains• Compound Stresses and Strains• Bending Moments and Shearing Forces in

Beams• Centroid and Moment of Inertia• Bending Stresses• Deflection Due to Bending• Torsion• Columns• Strain Energy• Theories of Failure• Thin Cylinders and Spheres

• Fixed Beams• Shear Stress Distribution• Shear Stress Distribution in thin Sections and

Shear Centre• Curved Beams• Springs• Thick Cylinders and Spheres• Rotating Rims and Discs• Deflection and Strain Energy Due to Shear• Compound (Combined) Loading• Riveted Joints• Appendices• Index

STRENGTH OFMATERIALS

By : R.S. Lehri &A.S. Lehri

Size : 20 x 30/8Pages : 1100 Approx.ISBN : 978-93-5014-313-1

81-85749-44-2

Price Rs. : 450/-Reprint : 2012

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 83

MACHINEDESIGN

By: A.P. Verma

CONTENTS :• Introduction to Design• Riveted and Welded Joints• Screwed Joints• Keys and Couplings• Shafts• Cotter Joints• Knuckle Joint• Power Screws• Clutches• Cams• Appendices• Index

Size : 23 x 36/16Pages : 475 Approx.ISBN : 978-93-5014-402-2

81-85749-51-5

Price Rs. : 165/-Reprint : 2013

CONTENTS :• Concept of Systems and Operations

Management• Plant Location, Plant Layout and

Material Handling• Sales Forecasting• Production Planning• Production Control and Machine

Capacity• Networking Techniques• Accidents and Safety• Human Resource Development (HRD)• Index

Size : 20 x 26/8Pages : 170 Approx.ISBN : 978-93-5014-001-7

Price Rs. : 99/-Reprint : 2013

OPERATIONSMANAGEMENT

By: A.P. Verma

For Polytechnic Students

CONTENTS :• Concept of Human Resource

Management• Procurement and Placement• Job Evaluation and Performance

Appraisal• Training and Development• Work Design & Job Design• Motivation and Job Satisfaction• Worker’s Participation in Management• Integration• Maintenance• Future Challenges for HRM

HUMANRESOURCE

MANAGEMENT

By: A.P. VermaSize : 23 x 36/16Pages : 375 Approx.ISBN : 81-85749-72-8

Price Rs. : 130/-Reprint : 2011-2012

CONTENTS :Chapter-I:• Work StudyChapter-II:• Plant LayoutChapter-III:• Material HandlingChapter-IV:• Production Planning and ControlChapter-V:• Inspection and Quality ControlChapter-VI:• Standards and Codes

Size : 20 x 26/8Pages : 350 Approx.ISBN : 81-85749-56-6

Price Rs. : 165/-Reprint : 2012

PRODUCTIONMANAGEMENT

By: A.P. Verma

Chapter-VII:• Repair & MaintenanceChapter-VIII:• Cost EstimationChapter-IX:• Value EngineeringChapter-X:• Accidents and SafetyChapter-XI:• Environmental Engineering• Practicals Exercise• Examination Papers• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS84

(With Autocad)

CONTENTS :• Introduction• Lettering• Geometrical Constructions• Scales• Dimension and Convention

Representation• Orthographic Projection• Projection of Points and Lines• Projection of Planes• Projection of Solids• Section of Solids• Development of Surfaces of Solids• Isometric Projection• Intersection of Surfaces

By: B.K. GoelP. K. Goel

• Projection on Auxiliary Planes• Free Hand Sketching• Auto-Cad• Nomography• Viva-Voce• Semester Units• Index

By: B.K. GoelP. K. Goel

CONTENTS :• Introduction• Blue Print Reading and Interconversion

of View• Sectioning• Sketching• Screw Thread and Fasteners• Keys Cotters and Pin Joints• Couplings and Pipe Joints• Rivet and Welding Joints• Bearings and Brackets• I.C. Engine Parts

• Steam Engine Parts• Boiler Mountings• Limits, Fits and Tolerances• Production Drawing• Gears• Jigs and Fixtures• Miscellaneous Machine Tools• Auto-Cad• Specification of Materials• Viva Voice• Index

Size : 20 x 30/8Pages : 255 Approx.ISBN : 978-93-5014-095-6

Price Rs. : 185/-Reprint : 2012

MACHINEDRAWING

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-81-907386-2-0

Price Rs. : 195/-Reprint : 2012

ENGINEERINGGRAPHICS

Size : 20 x 30/8Pages : 525 Approx.ISBN : 978-93-5014-240-0

Price Rs. : 275/-Second Edition : 2012

INTRODUCTION TOOPERATIONS

RESEARCH

By: A.P. Verma

CONTENTS:• Introduction to Operations Research• Linear Programming Problems:

Formulation and Graphical Solution• Linear Programming Problems-Simplex

Method• Transportation Problems• Assignment Problems• Duality in Linear Programming• Waiting Line Model (Queuing Model)• CPM and Pert (Project Line Models)• Simulation• Decision Analysis• Game Theory (Competitive Strategies)

• Replacement Problems• System Reliability• Software Reliability• Information Theory• Appendix• Examination Papers• Index

CONTENTS :• Introduction to Industrial Management• Management Function• Production and Productivity• Industrial Ownership• Inventory Control• Supply Chain Management• Quality Control• Environmental Engineering• Index

Size : 20 x 26/8Pages : 215 Approx.ISBN : 978-93-5014-121-2

Price Rs. : 99/-First Edition : 2011

FUNDAMENTALS OFINDUSTRIAL

MANAGEMENT

By: A.P. Verma

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 85

• Industrial Relation, Recruitment,Selection, Training and IndustrialLegislation

• Cost Accounting, Mechanical Estimationand Cost Estimation

• Program Evaluation, Review Techniquesand Critical Path Method

• Economic Studies for Investment &Replacement

• Engineering Economy and TheEngineering Process

• Financial Management• Introduction to Management and

Role of a Manager• Value Analysis• Entrepreneurship• Marketing Management• Operation Research• Manpower Planning• Introduction to MRP, JIT Supply Chain

Management and TQM• Maintenance Management• Waste Management• Ergonomics• Bibliography• Index

INDUSTRIALENGINEERING AND

ORGANIZATIONMANAGEMENT

By : S.K. SharmaSavita Sharma

Size : 20 x 30/8Pages : 900 Approx.ISBN : 81-85749-13-2

Price Rs. : 395/-Reprint : 2013

CONTENTS :• Industrial Engineering and Development

of Factory System• Production, Productivity and Business

Organization• Locational Economics and Plant Layout• Sales Forecasting• Product Development and Design• Materials Purchase and Store Practice• Production, Planning and Control• Factory Organization• Inspection and Quality Control• Depreciation• Break-Even Analysis• Inventory Control• Wage Payment Plans• Job Evaluation and Merit Rating• Book Keeping and Accountancy• Material Handling• Introduction to Work Study• Motion Study, P.M.T.S., M.T.M. Work

Sampling and Principles of MotionEconomy

• Work Measurement (Time Study)• Personnel Management and

Administration

CONTENTS :• Work Study and Productivity• Management Techniques to Reduce

Work Content and Ineffective Time• Working Condition and Industrial Safety• Method Study• Work Measurement (Time Study)• Predetermined Motion Time Systems• Other Techniques of Work

Measurement• Plant Layout• Ergonomics

WORK STUDY &ERGONOMICS

By: S.K. SharmaSavita Sharma

Size : 20 x 26/8Pages : 380 Approx.ISBN : 81-88458-34-1

Price Rs. : 175/-Reprint : 2011

• Value Analysis• Job Evaluation and Merit Rating• Wage Payment Plans• Material Handling• Industrial Psychology• Operation Research• Bibliography• Index

CONTENTS :Part-I: General• IntroductionPart-II: Steam Power Plants• Introduction• Steam Generators, Water Treatment• Steam Nozzles and Steam Turbines• Steam Turbines Performance and

Efficiencies• Heat Cycles• Condensers• Cooling Ponds and Cooling Towers• Fuels, Fuel Handling, Combustion,

Combustion Control• Ash Handling, Dust Collection,

Soot Blowers• Superheaters, Economisers and

Preheaters, Feed Water Heaters andEvaporators

POWERPLANT

ENGINEERING

By: Dr. P.C. Sharma

• Miscellaneous• Nuclear Power Plants

Part-III: Internal Combustion Plants• Internal Combustion Engine Power

Plants• Gas Turbine Power Plants

Part-IV: Hydro-Electric Power Plants• Hydro-electric Power Plants

Part-V: Miscellaneous Topics• Economics of Power Plants• Economic Loading of Power Plants• Major Electrical Equipment• Plant Instrumentation• Pollution and Its Control• Appendices• Index

Size : 20 x 26/8Pages : 750 Approx.ISBN : 978-93-5014-384-1

81-89757-20-2

Price Rs. : 295/-Reprint : 2013

MECHANICAL ENGINEERING

S.K. KATARIA & SONS86

CONTENTS :Part-I : Theory• Motor Vehicle• Power System• Transmission System• Steering System• Braking System• Suspension System• Automobile Electrical System• Battery• Dynamo and Alternator

Size : 20 x 30/8Pages : 350 Approx.ISBN : 81-85749-48-5

Price Rs. : 185/-Reprint : 2012

AUTOMOBILEENGINEERING

By: R.K. Singal

• Diagram of a Typical Wiring System• Lighting System and Accessories• Emission ControlPart-II : Practices• Practicals• Board Paper with Solution/Hints• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-274-5

81-88458-50-3

Price Rs. : 155/-Fifth Edition : 2012

IC ENGINESAND

COMPRESSORS

CONTENTS :Unit-I: Introduction• Engine Power Cycles• Engine Classification• Engine Fuels• Testing and PerformanceUnit-II: SI Engines• Combustion in SI Engine• Carburetion• Ignition SystemUnit-III: C.I. Engines• Combustion in CI Engines• Fuel Injection SystemBy: R.K. Singal

• Scavenging in Two Stroke Engines• Pollution and Its ControlUnit-IV: Compressors• Engine Cooling• Engine Lubrication• Supercharging• Reciprocating Compressors• Rotary Compressor• Index

By : Khushdeep GoyalDeepak Bhandari

CONTENTS :• Automation• Basics of Fluid Power• Hydraulic Fluid Power Systems• Pneumatic Fluid Power Systems• Assembly Automation Equipment• Electrical and Electronic Controls• Robotics• Robot Applications• Robot Programming• Future Trends in Automated Systems• Flexible Manufacturing System (FMS)• Model Question Papers• Index

Size : 20 x 26/8Pages : 425 Approx.ISBN : 81-89757-53-9

Price Rs. : 225/-Reprint : 2012

INDUSTRIALAUTOMATION

andROBOTICS

By : Khushdeep GoyalDeepak Bhandari

AUTOMATIONAND

ROBOTICS

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-246-2

Price Rs. : 195/-Reprint : 2013

CONTENTS :• Introduction• Robot Elements• Robot Coordinate System and

Manipulator Kinematics• Robot Control• Robot Programming• Robot Applications• Automation• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 87

CONTENTS :Unit-I: Concepts of Projects and ProjectManagement• Concept of Projects and Classification• Concept of Projects Management &

ScopeUnit-II: Project Organization andContracts• Project Organization• Project ContractsUnit-III: Project Appraisal and CostAnalysis• Project Appraisal• Project Cost and Performance Analysis

Size : 20 x 26/8Pages : 250 Approx.

ISBN : 978-93-80027-51-7

Price Rs. : 175/-Reprint : 2011

PROJECTMANAGEMENT

By: R.K. SingalM. SingalR. Singal

Unit-IV: Project Planning and Schedulingand Network Cost System• Project Planning & Scheduling• Network Cost SystemsUnit-V: Network Models andComputerized Project Management• Network Models: Modifications and

Extensions• Computer Aided Project Management• Modern Concepts in Project

Management• Annexures• Index

CONTENTS :Part-I: Entrepreneurship Development• Entrepreneurship• Entrepreneurial Support System• Market Survey and Opportunity

Identification (Business Planning)• Project Report PreparationPart-II: Management of Small ScaleIndustry• Managerial Aspects of Small Business• Legal Aspects of Small Business• Environmental Considerations• Human and Industrial Relations

Size : 20 x 26/8Pages : 300 Approx.ISBN : 81-89757-00-8

Price Rs. : 120/-Reprint : 2013

ENTREPRENEURSHIPDEVELOPMENT

&MANAGEMENT

By: R.K. Singal

• Motivation• Leadership• Some Aspects of Factory Management• Appendices• References• Model Question Papers• Previous Years Question Papers with

Solutions• Index

MECHANICALVIBRATIONS

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-5014-038-3

Price Rs. : 195/-First Edition : 2011

By: R.K. Singal

CONTENTS :Section-I: Basic Concepts and Principles• Basic Concepts• Analysis of Harmonic MotionSection-II: Single Degree of Freedom(SDF) System• Free Vibrations of SDF Systems• Free Damped Vibrations of SDF

Systems• Forced Vibrations of SDF Systems• Transient Vibration of SDF SystemsSection-III: Two Degree of Freedom(TDF) Systems• Vibrations of TDF Systems

• Vubration Absorber SystemsSection-IV: Multi Degree of Freedom(MDF) Systems• Vibrations of MDF Systems• Vibrations of Continuous Systems• Analysis of MDF Systems by

Numerical Methods• Critical Speed of Shafts• Design Problems and ExperimentsSection-V: Appendices• Index

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-93-5014-048-2

Price Rs. : 150/-Reprint : 2012

PRODUCTIONPLANNING &

CONTROL

By: R.K. Singal

CONTENTS :Unit-I: Production Systems and BusinessPlanning• Production Systems• Business PlanningUnit-II: Production Planning: Resourcesand Procedures• Production Planning: Resources• Production Planning: ProceduresUnit-III: Production and InventoryControl• Production Control• Inventory Control

Unit-IV: Productivity and Human Factors• Productivity• Human Factors and ErgonomicsUnit-V: Appendices• Appendix A to E• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS88

CONTENTS :• Introduction• Psychrometric Chart and Tables• R-729 Air• Lithium Bromide and Ammonia-Water

Solutions• R-717 Ammonia (NH3)• R-744 Carbon Dioxide• R-11 Freon-11• R-12 Freon-12• R-22 Freon-22• R-502 Azeotrope• R-13A Tetrafluorothane

Size : 20 x 30/8Pages : 80 Approx.ISBN : 81-89757-21-0

Price Rs. : 75/-Reprint : 2009-10

REFRIGERATIONand

PSYCHROMETRICCHARTS

By: R.K. Singal

With Property Tables (S.I. Units)

Size : 20 x 26/8Pages : 200 Approx.ISBN : 81-89757-25-3

Price Rs. : 95/-Reprint : 2011

PRODUCTIONMANAGEMENT

CONTENTS :• Production Planning and Control• Plant Location and Layout• Work Study• Inventory Control• Inspection and Quality Control• Material Handling• Repair and Maintenance• Cost Estimation and Control• Appendices• Index

By: R.K. Singal

CONTENTS :Part-I: Current Energy Systems• Energy Utilization• Energy Resources• Energy Conversion TechnologiesPart-II: Renewable Energy Systems• Wind Energy• Small Hydro Power Plants• Biomass and Bioenergy• Geothermal Energy• Solar Thermal Energy• Ocean Thermal Energy• Wave and Tidal Wave EnergyPart-III: Direct Energy ConversionSystems

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-312-4

81-88458-82-1

Price Rs. : 165/-Reprint : 2012

NON-CONVENTIONAL

ENERGYRESOURCES

By: R.K. Singal

• Fuel Cells• Solar Cells• MHD Power Generation• Thermoelectric Power Generation• Thermionic Power GenerationPart-IV: Future Energy Sources• Nuclear Fusion Energy• Hydrogen Energy• Exploring New Energy SourcesPart-V: Allied Energy Systems• Energy Resource Conservation• Energy StoragePart-VI: Projects and PapersPart-VII: Appendix• Subject Index

CONTENTS :• Workshop Layout• Carpentry Shop• Fitting / Bench Working Shop• Black Smithy Shop• Welding Shop• Steel Metal Shop• Machine Shop• Foundry Shop• Model Question Papers• Selected Questions with Solutions• Index

WORKSHOPMANUAL

By: R.K. Singal

Size : 23 x 36/16Pages : 200 Approx.ISBN : 81-85749-91-4

Price Rs. : 95/-Reprint : 2011

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 89

CONTENTS :• Introduction• Table 1 Compressed and Subcooled

Water• Table 2 Properties of Saturated Water

and Steam (Temperature Varying)• Table 3 Properties of Saturated Water

and Steam (Pressure Varying)• Table 4 Thermodynamic Properties of

Superheated Steam• Table 5 Properties of Supercritical Steam

Size : 20 x 30/8Pages : 56 Approx.ISBN : 81-89757-22-9

Price Rs. : 75/-Reprint : 2012

STEAM TABLES

By: R.K. Singal

With Mollier Diagrams(S.I. Units)

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-188-5

Price Rs. : 175/-Second Edition : 2012

ENTREPRENEURSHIPDEVELOPMENT

By: Dr. R.K. SingalSruti Singal

CONTENTS :Part-I: Entrepreneur and Small ScaleIndustries• Entrepreneur• Small Scale IndustriesPart-II: Business Planning• Project Identification and Selection• Project Report PreparationPart-III: Accountancy and Managementof Small Business• Accountancy• Managerial Aspects of Small BusinessPart-IV: Project Planning and Control• Project Planning• Project Control

Part-V: Legal Obligations andEntrepreneurial Support System• Legal Obligations• Entrepreneurial Support System• Annexures• Index

A SELECTIVE COURSE INNON-CONVENTIONALENERGY RESOURCES

By: R.K. SingalSaroj Singal

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-213-4

Price Rs. : 160/-Reprint : 2013

• Coloured Mollier Diagram in SI Units• Additional Mollier Diagram in MKS Units

CONTENTS :Unit-I:• Energy Resources• Solar CellsUnit-II :• Solar Thermal EnergyUnit-III:• Geothermal Energy• Mageto-Hydrodynamic (MHD)• Fuel CellsUnit-IV:• Thermoelectric and Thermionic

Conversions• Wind Energy

Unit-V:• Biomass• Ocean Thermal Energy Conversion

(OTEC)• Wave and Tidal Wave• Waste Recycling Plants• Index

ENTREPRENEURSHIP

By: R.K. Singal

Size : 20 x 26/8Pages : 150 Approx.ISBN :

Price Rs. : 95/-First Edition: 2011

CONTENTS :• Promotion of Entrepreneurship• Ownership and Location of Industrial

Units• Size of Firm and Pricing• Financing of Small Industries• Problems Faced by Small Enterprises• Government and Business• Annexures• References Books• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS90

CONTENTS :• Introduction to Operation Research• The Simplex Method• Transportation Model and its Variants• Network Models• Game Theory• Queuing Theory• Introduction to Patents and Intellectual

Property Rights• Introduction to Engineering Management• Technology Management

INDUSTRIALMANAGEMENT

By: K. Patrai

Size : 20 x 26/8Pages : 350 Approx.

ISBN : 81-89757-55-5

Price Rs. : 180/-Reprint : 2010

CONTENTS :• Introduction• Productivity• Management Functions• Management Tools• Work Simplification• Production Planning and Control• Inventory Control• Quality Control• Statistical Quality Control (SQC)• Total Quality Management (TQM)• Environmental Issues• ISO: 14000 Series• Just in Time (JIT)

INDUSTRIALMANAGEMENT

By: Onkar N. PandeyBhupesh Aneja

Size : 20 x 26/8Pages : 250 Approx.

ISBN : 978-93-5014-120-5

Price Rs. : 150/-Second Edition : 2013

• Pareto Principle• Swot Analysis• Value Engineering• Glossary• Appendices• References• Index

• Management Projects• Model Question Papers• Examination Papers• Index

CONTENTS :Unit-I:• Static and Dynamic Force Analysis• Turning Moment and FlywheelUnit-II:• Balancing of MachinesUnit-III:• Governors

THEORY OFMACHINES

By: R.K. Singal

Size : 20 x 26/8Pages : 210 Approx.

ISBN : 978-93-5014-237-0

Price Rs. : 150/-Reprint : 2013

Unit-IV:• Gyroscopic Motion• Mechanical Vibrations• Sample University Paper (Solved)• References• Index

CONTENTS :Unit-I: Introduction• Basic Concepts• Engine Terminology• Engine Testing and PerformanceUnit-II: Engines• Engine Testing and PerformanceUnit-III: Engines• Combustion in C.I. EnginesUnit-IV: I.C. Engines Systems• Fuel Ignition Systems• Carburetion and Fuel Injection in S.I.

Engines• Fuel Injection Systems of C.I. Engines

INTERNALCOMBUSTION

ENGINES

By: R. K. Singal

Size : 20 x 26/8Pages : 260 Approx.

ISBN : 978-93-5014-214-1

Price Rs. : 165/-First Edition : 2012

• Engine Fuels• Engine Exhaust Emission• Engine Cooling Systems• Engine Lubrication Systems• Scavenging Systems• Special Types of EnginesUnit-V: Supercharging• Supercharging• Experiments• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 91

CONTENTS :Part-I: Metrology• Introduction• Principles of Measuring Instruments• Linear Measurements• Angular and Taper Measurements• Screw Thread Measurements• Gear Measurements• Measurements of Circularity• Comparators• Measurements of Surface Finish• Optical Measuring Devices

Size : 23 x 36/16Pages : 550 Approx.ISBN : 978-93-5014-395-7

81-85749-82-5

Price Rs. : 175/-Reprint : 2013

ENGINEERINGMETROLOGY &

INSTRUMENTATION

By: R.K. Rajput

• Straightness, Flatness, Squareness andParallelism

• Machine Tool Testing• Miscellany

Part-II: Instrumentation• Transducers• Measurement of Non-Electrical

Quantities• Laboratory Practicals• Objective Type Questions Bank• Question Papers

CONTENTS :• General• Structure of Metals and Their

Deformation• Ferrous Materials• Non-Ferrous Materials• Engineering Plastics and Fibres• Insulating Materials• Identification and Testing of

Metals and Alloys• Fundamentals of Heat Treatment• Metallurgical Considerations

MATERIALSCIENCE

By: R.K. Rajput

• Experiments• Objective Type Questions• Appendices• Index

CONTENTS :• General Concepts• Static and Dynamic Characteristics of

Instruments• Errors in Measurements• Metrology• Sensors and Transducers• Signal Conditioning and Data

Transmission• Display Devices and Recorders• Pressure and Flow Measurements• Temperature Measurements

MECHANICALMEASUREMENTS ANDINSTRUMENTATION

By: R.K. Rajput

Size : 20 x 30/8Pages : 850 Approx.ISBN : 978-93-5014-285-1

81-88458-83-X

Price Rs. : 425/-Second Edition : 2012

(INCLUDING METROLOGY ANDCONTROL SYSTEMS)

• Displacement, Velocity, Acceleration,Force, Torque and Shaft PowerMeasurement

• Miscellaneous Measurements• Mechatronics and Control Systems• Universities Questions (Latest) - with

Answers/Solutions• Additional Objective Type Questions

Bank• Index

Size : 20 x 26/8Pages : 315 Approx.ISBN : 81-85749-10-8

Price Rs. : 165/-Reprint : 2013

CONTENTS :• Introduction• Structure of Atoms and Molecules• Metals and Alloys• Deformation, Strengthening of Metals

and Failure Analysis• Heat Treatment• Ceramic Materials• Electrical Materials• Magnetic Materials• Polymers, Elastomers and Composites• Construction and Industrial Materials• Miscellaneous Materials• Thermal Properties• Corrosion• Electron Theory of Metals

MATERIALSCIENCE

ANDENGINEERING

By: R.K. Rajput

• Diffusion in Solids• Powder Metallurgy• Forming Processes• Objective Type Questions with Answers• Appendix• Index

Size : 20 x 30/8Pages : 1000 Approx.ISBN : 81-85749-92-2

Price Rs. : 350/-Reprint : 2013

(Two Colour Edition)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS92

(Polytechnics)

Size : 20 x 30/8Pages : 900 Approx.ISBN : 978-93-5014-255-4

81-88458-40-6

Price Rs. : 415/-Reprint : 2013

A Textbook ofREFRIGERATION

ANDAIR-CONDITIONING

By: R.K. Rajput

CONTENTS :Part-1: Refrigeration• Fundamentals of Refrigeration• Air-refrigeration Cycles and Systems• Simple Vapour Compression Refrigeration System• Vapour Compression Refrigeration Systems with

Multiple Evaporators and Compressor• Vapour Absorption Refrigeration System• Steam Jet Refrigeration System• Low Temperature Refrigeration (Cryogenics)• Non-Conventional Refrigeration Systems• Refrigerants, Driers and Lubricants• Refrigeration, Components and Controls• Defrosting MethodsPart-II: Air-conditioning• Psychrometrics• Human Comfort• Air-Conditioning Systems

• Air-Conditioning Equipment, Components andControls

• Duct and Air-distribution Systems• Fans• Load Estimation• Measuring Instruments–Air-ConditioningPart-III: Miscellaney• Thermal Insulation• Applications of Refrigeration and Air-Conditioning• Maintenance and Repair of Commercial and

Domestic Equipment• Refrigeration and Air-Conditioning Tools• Universities Questions (Latest) with “Solution”

Additional Objective Type Questions (withAnswers and Solutions-Comments)

• Appendices• Refrigeration and Air-conditioning Tables and

Charts (including Psychrometric Chart)• Index

MATERIALSCIENCE IN

ENGINEERING

By: R.K. Rajput

CONTENTS :Unit-I:• Introduction: Perspective and

Importance of Engineering Materials• Atomic Models Periodic Table and

Chemical Bonding• Crystallography• Imperfections (Defects) in SolidsUnit-II:• Mechanical Properties and Testing• Microstructural Examination-Identification

of Metals and Alloys• Phase Diagram and Equilibrium DiagramUnit-III:• Ferrous Metals and Alloys

• Heat Treatment• Non-Ferrous Metals and AlloysUnit-IV:• Magnetic Properties• Electric Properties• Diffusion in SolidsUnit-V:• Ceramics• Polymers/Plastics and Composite

Materials• Performance of Materials in Service

(Fracture, Fatigue and Corrosion andits Control)

• Laboratory Practicals• Solved Papers• Index

(UPTU)

Size : 20 x 30/8Pages : 600 Approx.ISBN : 81-89757-35-0

Price Rs. : 270/-Reprint : 2012

CONTENTS :Part-I: Refrigeration• Fundamentals of Refrigeration• Air-refrigeration Cycles and Systems• Simple Vapour Compression

Refrigeration System• Vapour Absorption Refrigeration System• Refrigeration, Driers & Lubricants,• Refrigeration Components and ControlsPart-II: Air-Conditioning• Psychrometrics• Human Comfort• Air-Conditioning Systems• Air-Conditioning Equipment,

Components & Controls

Size : 20 x 26/8Pages : 525 Approx.ISBN : 81-85749-77-9

Price Rs. : 175/-Reprint : 2012

REFRIGERATION&

AIR-CONDITIONING

By: R.K. Rajput

• Duct and Air-Distribution Systems• Load Estimation• Measuring Instruments–Air-conditioningPart-III: Miscellaney• Thermal Insulation• Applications of Refrigeration and

Air-conditioning• Maintenance and Repair or Commercial

and Domestic Equipment• Refrigeration and AC Tools• Appendices• Refrigeration Tables and Charts• Practicals• Index

CONTENTS :• Stress and Strains• Centroid and Moment of Inertia• Bending Moments and Shearing Forces• Bending Stresses in Beams• Combined Direct and Bending Stresses• Torsion of Circular Shafts• Springs• Resilience• Columns and Struts• Deflection of Beams• Experiments

STRENGTH OFMATERIALS

By: R.K. Rajput

(Mechanics of Solids)For Polytechnic Students

Size : 20 x 26/8Pages : 300 Approx.ISBN : 81-88458-10-4

Price Rs. : 165/-Reprint : 2013

• Solved Question Papers• Index

(Two Colour)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 93

CONTENTS :• Introduction to Manufacturing ProcessesUnit-I:• Metal Casting Process (Foundry)• Special Casting ProcessesUnit-II:• Smithy and Forging• Bench Work and FittingUnit-III:• Metal Joining Processes (Welding)Unit-IV:• Sheet Metal Operations (Cold Working

Processes)

MANUFACTURINGPROCESSES

By: Virender Narula

• Short Question Answers• Objective Question Bank• Index

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 165/-Third Edition : 2011-12

CONTENTS :Unit-I: Basic Metals and Alloys:Properties and Application• Properties of Engineering Materials• Ferrous Metals• Nonferrous Metals and AlloysUnit-II: Metal Forming Process andCasting• Hot Working Processes• Cold Working Processes (Press-Work)• Casting ProcessesUnit-III: Introduction to Machining andWelding and its Applications• Metal Cutting Processes• Welding (Metal Joining Process)

MANUFACTURINGPROCESSES

By: Virender Narula

(For UPTU)

Unit-IV: Miscellaneous Topics• Manufacturing and Plant Layout• Nonmetallic Materials and Miscellaneous

Processes• Expected questions and Answers• Objective Questions Bank• Examination Paper• Index

Size : 20 x 30/8Pages : 380 Approx.ISBN : 978-93-80027-04-3

Price Rs. : 225/-Reprint : 2010

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-047-5

Price Rs. : 225/-Reprint : 2012

FUNDAMENTALS OFMATERIALSCIENCE

By: R.K. Rajput

CONTENTS :Section-A:• Crystallography• Imperfections in Metal CrystalsSection-B:• Solids Solutions and Phase Diagrams• Heat TreatmentSection-C:• Deformation of Metals and Fatigue of

Metals

Section-D:• Creep and Corrosion• Plastics and Composite Materials• Creamic Materials• Index

A TEXTBOOK OFMEASUREMENTS& METROLOGY

Size : 20 x 30/8Pages : 310 Approx.ISBN : 978-93-5014-230-1

Price Rs. : 195/-Reprint : 2013

By: Er. R.K. Rajput

CONTENTS :Part-I: Mechanical Measurement• General Concepts• Sensors and Transducers• Signal Conditioning Transmission and

Processing• Time Related Measurements• Measurement of Pressure• Strain Measurement• Measurement of Force, Torque,

Acceleration and Vibrations• Temperature MeasurementsPart-II: Metrology and Inspection• Introduction to Metrology and Inspection

• Linear and Angular Measurements andComparators

• Measurement of Geometric Forms• Measurement of Screw Threads and

Gears• Surface Texture/Finish• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS94

CONTENTS :• Introduction to Numerical Control of

Machine Tools• Introduction to Automation• Numerical Control Machines• CNC Machines• Manual Part Programming,• Computer Aided Part Programming• Tools for NC/CNC Machines• Electric Drives and Feedback Devices• Group Technology• Computer Aided Process Planning

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-371-1

81-88458-70-8

Price Rs. : 150/-Reprint : 2013

COMPUTERAIDED

MANUFACTURING

By: S. Vishal

• Flexible Manufacturing System• Robotics• Artificial Intelligence• Index

CONTENTS :• Introduction to Numerical Control of

Machine Tools• Numerical Control Machines• CNC Machines• Manual Part Programming• Computer Aided Part Programming• Tools for NC / CNC Machines• Electric Devices and Feedback Devices• Flexible Manufacturing System• Robotics• Bibliography• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 81-88458-11-2

Price Rs. : 99/-Reprint : 2012

AN INTRODUCTION TONC/CNC

MACHINES

By: S. Vishal

CONTENTS :• Introduction to Workshop Technology• Industrial Safety and Accidents• Engineering Materials• Bench Work and Fitting (Fitting Shop)• Hot Working Processes (Smithy and

Forging Shop)• Sheet Metal Processes (Sheet Metal

Shop)• Carpentry Shop• Welding Processes (Welding Shop)• Metal Casting Processes (Foundry Shop)• Metal Cutting Processes (Machine Shop)• Index

WORKSHOPTECHNOLOGY

By: Virender Narula

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-93-5014-357-5

Price Rs. : 195/-Third Edition: 2012

CONTENTS :• Introduction to Workshop Technology• Industrial Safety and Accidents• Engineering Materials• Bench Work and Fitting (Fitting Shop)• Hot Working Processes (Smithy and

Forging Shop)• Sheet Metal Processes (Sheet Metal

Shop)• Carpentry Shop

Size : 20 x 30/8Pages : 325 Approx.

ISBN : 978-93-5014-358-2

Price Rs. : 195/-Third Edition : 2012

MANUFACTURINGPRACTICES

(Including Tools & Exercises)

By: Virender Narula

• Welding Processes (Welding Shop)• Metal Casting Processes (Foundry Shop)• Metal Cutting Processes (Machine Shop)• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 95

CONTENTS :• Simple Mechanisms• Friction• Transmission• Flywheel• Governors• Balancing• Vibrations• Appendix

Size : 23 x 36/16Pages : 400 Approx.ISBN : 81-85749-69-8

Price Rs. : 125/-Reprint : 2012

THEORY OFMACHINES

By: B.S. Ubhi

CONTENTS :• Principles of I.C. Engines• Carburation and Ignition Systems of

Petrol Engines• Fuel Systems in Diesel Engines• Cooling and Lubrication• I.C. Engine Testing• Air Compressors• Nozzles and Steam Turbines• Objective Type QuestionsSize : 23 x 36/16

Pages : 325 Approx.

Price Rs. : 150/-Reprint : 2010

By: Er. B.S. Ubhi

THERMODYNAMICS(Vol. 1I)

CONTENTS :• Fundamental Concepts• Laws of Perfect Gases• Thermodynamic Processes on Gases• Laws of Thermodynamics• Ideal and Real Gases• Properties of Steam• Steam Generators• Fuels and Combustion• Air Standard Cycles• Air Compressors

Size : 20 x 26/8Pages : 400 Approx.

ISBN : 978-93-80027-25-8

Price Rs. : 165/-Reprint : 2011

THERMODYNAMICS • Introduction to Heat Transfer• Experiments• Tables• Index

(Vol. 1)

By: B.S. Ubhi

• Review Questions• Experiments• Tables• Index

CONTENTS :• An Overview of Engineering Materials• The Structure of Materials• Imperfections in Crystals• Mechanical Properties and Testing• Failure Mechanisms• Equilibrium Phase Diagrams• Carbon Steels and Their Heat

Treatments• Non-Ferrous Metals and Alloys• Polymers• Ceramic Materials• Composites

Size : 20 x 26/8Pages : 265 Approx.ISBN : 81-88458-31-7

Price Rs. : 265/-Reprint : 2012

ADVANCES INMATERIALSCIENCE

By: Rakesh Dogra

• Powder Metallurgy• Dielectric and Conducting Materials• Semiconductor and Superconductors• Optical Properties• Magnetic Materials• Appendix• Previous Years Question Papers• Index

(For PTU)

MECHANICAL ENGINEERING

S.K. KATARIA & SONS96

MANUFACTURINGPRACTICE

By: Swarn Singh

CONTENTS :• Carpentry and Pattern Making• Foundry Shop• Forging Practice• Machine Shop• Welding Shop• Electrical Shop• Electronic Shop• Sheet Metal Shop• Fitting Shop• Index

Size : 23 x 36/16Pages : 275 Approx.

ISBN : 978-93-5014-161-8

Price Rs. : 95/-Reprint : 2013

DATA BOOK FORDESIGNINGMACHINEELEMENTS

By: Arun Kumar

CONTENTS :• Riveted Joints• Welded Joints• Screwed Joints

• Shaft• Keys• Couplings• Cotter Joints• Knuckle Joints• Power Screws• Flat Belts• Flat Belts Pulleys• V-Belts and Rope Drives• Chain Drives• Clutches• Brake• Flywheel• Bearings• I.C. Engine• Worm Gears

• Spur Gears• Helical Gears• Bevel Gears• Levers• Springs• Columns and Struts• Seals and Gaskets• Governors• Dynamometers• Cams• Inertia Forces in Reciprocating Objects• Balancing of Reciprocating Masses• Longitudinal and Transverse Vibrations• Torsional Vibrations• Gen• Appendices

Size : 20 x 30/8Pages : 450 Approx.ISBN : 81-89757-33-4

Price Rs. : 230/-Reprint : 2013

CONTENTS :• Carpentary Shop• Fitting Shop• Welding Shop• Smithy Shop• Electrical Shop• Foundry Shop• Sheet Metal Shop• Machine Shop• Electronic Shop

WORKSHOPPRACTICE

By: Swarn Singh

Size : 23 x 36/16Pages : 275 Approx.ISBN : 978-93-80027-30-2

Price Rs. : 95/-Reprint : 2013

CONTENTS :Unit-I:• Introduction to Operations Research• Linear Programming-Graphical Method• Linear Programming-Simplex MethodUnit-II:• Transportation Problem• Assignment Problems• Dynamic ProgrammingUnit-III:• Decision Theory• Game Theory• Sequencing ProblemUnit-IV:• Stochastic Inventory Models

Size : 20 x 26/8Pages : 500 Approx.ISBN : 978-93-5014-284-4

81-89757-18-0

Price Rs. : 245/-Fifth Edition : 2012

OPERATIONSRESEARCH

By: Prof. Vivek Kumar

• SimulationsUnit-V:• Queuing Models• Project Management (PERT and CPM)• Replacement Problem• Software Programs Board or

Applications• Appendix• Tutorial Question Bank• Model Question Papers• Questions from GATE• Previous Years Question Papers• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 97

CONTENTS :Unit-I:• Engineering Materials• Ferrous Materials• Heat Treatment• Non-Ferrous MaterialsUnit-II:• Metal Forming• CastingUnit-III:• Machines and Machining Operations• Welding

MANUFACTURINGPROCESSES

By: V. UpadhyayV. Agarwal

Unit-IV:• Manufacturing and Plant Layout• Non-Metallic Materials• Powder Metallurgy and Plastics• Model Question Papers• Previous Years Examination Papers• Index

Size : 20 x 26/8Pages : 275 Approx.ISBN : 978-81-907386-6-8

Price Rs. : 175/-Reprint : 2012

MANUFACTURINGPROCESSES-1

By: Er. Sandy Khippal

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-93-5014-367-4

Price Rs. : 175/-First Edition : 2012

STRENGTH OFMATERIALS

By: M. Chakarborti

CONTENTS :• Fundamentals• Simple Stress and Strains• Temperature Stress and Strains• Elastic Constants• Strains Energy and Impact Loading• Centre of Gravity• Moment of Inertia• Analysis of Framed Structures (Analytical

Method)• Analysis of Framed Structures (Graphical

Method)• Shear Force and Bending Moment of Beams• Bending Stress in Beams• Shearing Stresses in Beams• Deflection of Beams• Deflection of Cantilevers• Propped Cantilever and Beams• Fixed Beam

Size : 23 x 36/16Pages : 1000 Approx.ISBN : 978-93-5014-375-9

81-85749-30-2

Price Rs. : 285/-Reprint : 2013

• Continuous Beam• Direct and Bending Stresses• Columns and Struts• Dams and Retaining Walls• Torsion of Circular Shafts• Springs• Compound Stresses• Thin Cylinder and Spheres• Thick Cylinders and Spheres• Riveted Joints• Welded Joints• Mechanical Testing of Metals• Curved Beams• Rotational Stresses• Unsymmetrical Bending• Three Dimensional Stress Analysis• Appendix• Index

CONTENTS :Unit-I:• Introduction

Unit-II:• Casting Processes• Moulding• Cores• Gating and Rising System• Melting Furnaces• Casting Process

Unit-III:• Welding Processes

• Gas Welding and Gas Cutting• Arc Welding• Brazing and Soldering

Unit-IV:• Inspection and Testing• Bibliography• PTU, University Solved Question Papers• Index

MANUFACTURINGPROCESSES-II

By: Er. Sandy Khippal

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-93-5014-396-4

Price Rs. : 195/-First Edition : 2013

CONTENTS :• Metal Forming• Rolling Process• Forging• Extrusion• Drawing• Sheet Metal Forming Operation• Press Working• Powder Metallurgy• Metal Cutting• Cutting Tools• Cutting Tool Materials

• Machine Tools Lathe• Shaping and Planning• Milling Machine• Drilling Machine• Boring Machine• Grinding Machine• Broaching Machine• Practicals• Bibliography• Solved Question Papers• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS98

CONTENTS :• Introduction to Industrial Psychology• Motivation• Work Environment and Engineering

Psychology• Performance Management: Training and

Development• Objective Type Questions• References• Index

INDUSTRIALPSYCHOLOGY

By: DhamejaDhameja

Size : 20 x 26/8Pages : 200 Approx.ISBN : 978-93-80027-92-0

Price Rs. : 115/-Reprint : 2011

CONTENTS :• Industrial Sociology• Rise and Development of Industry• Industrialization in India• Contemporary Issues• Objective Type Questions• References• Index

Size : 20 x 26/8Pages : 130 Approx.ISBN : 978-9380027-93-7

Price Rs. : 99/-Reprint : 2013

By: Dhameja &Dhameja

INDUSTRIALSOCIOLOGY

CONTENTS :• Human Values and Value Education• Harmony in Human Beings• Harmony in the Family and Society• Harmony in the Nature• Human Values• Ethics• Glossary• Model Question Papers• Previous Years Question Paper

(Solved)• Index

HUMAN VALUESand

PROFESSIONALETHICS

By: Smriti Srivastava

CONTENTS :• Introduction• Principles of Design of Main

Components• Power and Torque Characteristics• Gear Box• Clutches• Automatic Transmission• Drive Line• Front Axle and Steering• Braking System• Chassis and Suspension System• Electrical System

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-81-907386-3-7

Price Rs. : 265/-Reprint : 2012

By: K.M. Moeed

AUTOMOBILEENGINEERING

• Fuel Supply System• Automobile Air-Conditioning• Cooling and Lubrication System• Maintenance System• Model Short Notes• Experiments• Previous Years Question Papers• Index

Size : 20 x 26/8Pages : 275 Approx.ISBN : 978-93-80027-86-9

Price Rs. : 140/-Third Edition : 2011-2012

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 99

ENTREPRENEURSHIPDEVELOPMENT

By: Ranbir Singh

CONTENTS :• Entrepreneurship• Business Plan• Small Scale Industries• Institutional Support System• Project Identification, Selection,

Formulation and Appraisal• Product Planning and Development• Concurrent Engineering• Rapid Prototyping• Marketing and Sales Management• Advertising

• Social Responsibilities andBusiness Ethics

• Indian Partnership Act, 1932• The Sale of Goods Act, 1930• Appendices• Examination Papers• References• Index

Size : 20 x 26/8Pages : 220 Approx.ISBN : 978-93-5014-263-9

Price Rs. : 135/-First Edition : 2012

UNCONVENTIONALMANUFACTURING

PROCESSES

By: Rahul Jain

CONTENTS :• Introduction to Unconventional

Manufacturing Processes• Abrasive Jet Machining• Electro-Discharge Machining (EDM)• Ultrasonic Machining (USM)• Electrochemical Machining• Electron Beam Machining• Laser Beam Machining• Plasma Arc Welding• Chemical Machining• Explosive Welding• Introduction of Welding• Underwater Welding

• Metallizing and Cladding• Weld Defects, Failure and Remedies• High Velocity Forming of Metals• Electronic Devices Manufacturing• References• Question Bank• Numerical Problems• Objective Type Questions• Model Test Papers• Examination Papers• IndexSize : 20 x 26/8

Pages : 200 Approx.

Price Rs. : 150/-Reprint : 2013

CONTENTS :• Economics• Economic Systems• Demand Analysis• Supply Analysis• Theory of Production• Monetary and Fiscal Policy• Banking in India• Privatization in India• Trade Cycles• Foreign Capital• Evolution of Management Thought• Management Concepts

PRINCIPLES OFENGINEERING

ECONOMICS ANDMANAGEMENT

By: Ranbir Singh

• Financial Management• Accounting• Marketing Management• Advertising• Production Management• Plant Location and Layout• Pert and CPM• Total Quality Management• Statistical Quality Control• References• Previous Years Examination Papers• Index

By: Ashok Raj

INDUSTRIALSOCIOLOGY

Size : 20 x 26/8Pages : 260 Approx.ISBN : 978-93-5014-208-0

Price Rs. : 150/-First Edition: 2012

Size : 20 x 26/8Pages : 325 Approx.ISBN : 978-93-5014-088-8

Price Rs. : 165/-Reprint : 2011-12

CONTENTS :• Introduction to Industrial Sociology• Development of Industrial Sociology• Industrialisation• Factory System• Factory Management Theory• Trade Unions• Industrialisation in India• Impact of Industrialisation on Society• Industrial Disputes, Strikes and Lockouts• Industrial Relations Machinery• Grievance and Complaint Management• Indian Labour Legislations

• Industrial Dispute Preventive Machinery• Industrial Disputes Preventive

Machinery in India• Industrial Disputes Settlement

Machinery• Industrial Disputes Settlement

Machinery in India• Unfair Labour Practices• References• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS100

PRODUCTIONAND

OPERATIONSMANAGEMENT

By: Pratibha Garg

Size : 20 x 26/8Pages : 210 Approx.ISBN : 978-93-5014-239-4

Price Rs. : 150/-Reprint : 2013

CONTENTS :• Production and Operations

Management• Product Design• Capacity Planning• Facility Location• Facility Layout• Job Design and Work Study• Project Management• Loading, Scheduling and

Sequencing of Operations

• Material Requirement Planning• World Class Manufacturing• Question Bank• Index

OPERATIONSMANAGEMENT

By: Dr. Pratibha GargDr. Anupama Prashar

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-80027-46-3

Price Rs. : 225/-First Edition : 2013

CONTENTS :Unit-I: Operations Management• Introduction• Factory Dynamics• Strategy

Unit-II: Product• Product Life Cycle• Product and Service Design

Unit-III: Processes• Reliability• Value Analysis• Maintenance Management• Process Capability

• Total Quality Management• Replacement Models

Unit-IV: Plant Facilities• Facility Location• Facility Layout

Unit-V: Production Planning and Control• Material Requirement Planning• Forecasting• Loading, Scheduling and Sequencing

Operations• Lean Manufacturing and JIT• Question Bank• Index

CONTENTS :Unit-1:• Introduction• Review of Conventional Welding ProcessUnit-II:• Advance Welding TechniquesUnit-III:• Advanced Welding Techniques

(Continued)Unit-IV:• Weld Design and Weld Defect• Testing and Inspection of Welding Joint• Macrostructure and Microstructure of

Welding

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-80027-39-5

Price Rs. : 225/-Reprint : 2013

ADVANCEDWELDING

TECHNOLOGY

By: S.P. TewariS.A. Rizvi

• Welding of Pipe Lines andPressure Vessels

Unit-V:• Thermal and Metallurgical

Consideration• Thermal Welding• Gravity Welding• Metal Transfer• Welding Electrodes• Objective Type Questions• Appendix• References• Examination Papers• Index

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-5014-244-8

Price Rs. : 230/-Second Edition : 2013

MANUFACTURINGSCIENCE-I

By: S.A. Rizvi

CONTENTS :Unit-I: Metal Forming Process (Part I)• Metal Forming• Forging

Unit-II: Metal Forming Process (Part II)• Drawing and Extrusion• Rolling

Unit-III: Sheet Metal Working• Presses

Unit-IV: Unconventional Metal FormingProcess• Unconventional Metal Forming Process• Powder Metallurgy

• Jigs and Fixtures• Manufacturing of Plastic Components

Unit-V: Casting (Foundry)• Casting and Patterns• Sand Casting Process• Gates• Casting Defects• Die Casting• Flaskless Moulding• Experiments• Bibliography• Previous Years Examination Papers• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 101

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-935014-301-8

Price Rs. : 245/-Second Edition : 2012

MANUFACTURINGSCIENCE-II

By: S.A. Rizvi

CONTENTS :Unit-I: Metal Cutting and Machine Tools• Theory of Metal CuttingUnit-II: Machine Tools• Lathe Machine• Shaper Machine• Drilling And Boring• MillingUnit-III: Grinding and Super Finishing• Grinding• Super Finishing Process• Limits, Fits and Tolerance

Unit-IV: Metal Joining (Welding)• Metal Joining• Unconventional Welding ProcessUnit-V: Unconventional MachiningProcess• Unconventional Machining Process

(UCM)• Experiments• Bibliography• Previous Years Examination Papers• Index

Size : 20 x 26/8Pages : 375 Approx.ISBN : 978-93-5014-191-5

Price Rs. : 240/-Reprint : 2012

A TEXTBOOK OFWELDING

TECHNOLOGY

By: G.D. Garg

CONTENTS :• Introduction to Welding• Welding Processes• Friction Welding• Resistance Welding Processes• Special Welding Processes• Arc Theory• Thermal Cutting Processes• Surfacing• Classification of Steels and their

Properties• Weldability• Weld Design - Symbols and Estimation

• Welding Distortion and Control• Weld Defects• Testing of Welds• Safety in Welding and Cutting• Heat-Treatment of Welds• Mechanisation and Automation in

Welding• Arc Welding Power Sources• Welding Consumables• Appendix• References• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-134-2

Price Rs. : 250/-First Edition : 2011

MECHANICALMACHINEDESIGN-I

By: Dr. Sadhu Singh

CONTENTS :• Design Philosophy• Selection of Materials• Manufacturing Considerations in DesignStrength Considerations in Design• Part-I : Static Loading• Part-II : Fluctuating LoadingMechanical Joints• Part-I : Riveted Joints• Part-II : Welded Joints• Part-III : Cotter and Knuckle-Joints• Keys, Couplings and Flywheel• Screwed Joints and Power Screws

• Shafts• Belt, Chain and Rope Drives• Clutches and Brakes• Paper• Index

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-266-0

Price Rs. : 250/-First Edition : 2012

MECHANICALMACHINEDESIGN-II

By: Dr. Sadhu Singh

CONTENTS :• Design for Production• Design for Variable Loading• Shafts• Springs• Sliding Bearings• Rolling Contact Bearings• Spur Gears• Helical Gears• Bevel Gears• Worm Gears• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS102

Size : 20 x 30/8Pages : 480 Approx.ISBN : 978-93-5014-189-2

Price Rs. : 265/-Reprint : 2012

INTERNALCOMBUSTIONENGINES ANDGAS TURBINES

By: Dr. Sadhu Singh

CONTENTS :• Introduction to Internal Combustion Engines• Air Standard Cycles• Carburetion, Fuel Injection and Ignition

Systems• Combustion in I.C. Engines• Lubricating and Cooling Systems• Engine Testing and Performance• Air Pollution From I.C. Engines• Reciprocating Air Compressors• Rotary Compressors• Centrifugal Compressors• Axial Flow Compressors• Gas Turbines• Short Answer Type Questions• Exercises• Previous Year Papers• Index

Size : 20 x 30/8Pages : 275 Approx.ISBN : 978-93-5014-196-0

Price Rs. : 195/-Reprint : 2012

COMPUTERAIDED DESIGN

By: Dr. Sadhu Singh

CONTENTS :• Introduction to CAD• CAD Hardware and Software• Geometric Transformations• Curves• Surfaces and Solids• Automation and Numerical Control• Group Technology• Flexible Manufacturing Systems (FMS)• Computer-Aided Process Planning• Finite Element Method• Question Paper• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-176-2

Price Rs. : 250/-First Edition : 2011

DYNAMICSOF MACHINES

By: Dr. Sadhu Singh

CONTENTS :• Static Force Analysis• Dynamic Force Analysis• Dynamics of Reciprocating Engines• Balancing of Machines• Governors• Dynamometers• Gyroscopic Motion• Appendix• Previous Year Papers• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-245-5

Price Rs. : 250/-First Edition : 2012

KINEMATICS OFMACHINES

By: Dr. Sadhu Singh

CONTENTS :• Introduction to Mechanisms• Velocity in Mechanisms• Acceleration in Mechanisms• Kinematic Analysis of Plane Mechanisms• Mechanisms with Lower Pairs• Friction• Belts, Chains and Ropes• Cams• Gears• Gears Trains• Kinematic Synthesis of Planar

Mechanisms• Index

By: Khushdeep GoyalDeepak Bhandari

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 195/-First Edition: 2013

COMPUTERAIDED

DESIGN

COMPUTERAIDED

DESIGN

KHUSHDEEP GOYALDEEPAK BHANDARI

By: Khushdeep GoyalDeepak Bhandari

Size : 20 x 30/8Pages : 200 Approx.ISBN :

Price Rs. : 195/-First Edition: 2013

COMPUTERAIDED

MANUFACTURING

COMPUTERAIDED

MANUFACTURING

KHUSHDEEP GOYALDEEPAK BHANDARI

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 103

Size : 20 x 26/8Pages : 210 Approx.ISBN : 978-93-5014-202-8

Price Rs. : 115/-Second Edition : 2012

HUMANRESOURCE

MANAGEMENT

By: Sikha Taneja

CONTENTS :• Understanding Organizational Behavior• Motivation and Morale• Communication• Leadership• Human Resources and Industry• HRD and Organization• Wages, Payments and Compensation• Issues and Challenges of Human

Behavior• Previous Years Question Papers• Index

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-195-3

Price Rs. : 175/-Second Edition : 2012

By: Renu Rana

CONTENTS :Section-A:• Management• Personnel ManagementSection-B:• Production ManagementSection-C:• Marketing ManagementSection-D:• Financial Management• Globalisation : Managing in International

Context• Previous Years Question Papers• Index

FUNDAMENTALS OFMANAGEMENT

Size : 20 x 26/8Pages : 275 Approx.ISBN : 978-93-5014-260-8

Price Rs. : 140/-First Edition : 2012

PRINCIPLES OFMANAGEMENT

By: Shikha TanejaRenu Rana

CONTENTS :• Management• Management Information System• Organization Structure and Organization

Analysis• Motivation and Productivity• HRD and Organization• Index

Size : 20 x 26/8Pages : 275 Approx.ISBN :

Price Rs. : 140/-First Edition : 2013

HUMANRESOURCE

MANAGEMENT

By: Er. Rahul Kansal By: Dr. Vikas SarafPawan Thakur

Lata Yadav

Size : 20 x 26/8Pages : 300 Approx.ISBN :

Price Rs. : 195/-First Edition : 2013

ENTREPRENEURSHIPAND

MANAGEMENTCONCEPTS

MECHANICAL ENGINEERING

S.K. KATARIA & SONS104

Size : 20 x 26/8Pages : 320 Approx.ISBN : 978-93-5014-137-8

Price Rs. : 175/-First Edition : 2011

ORGANISATIONALBEHAVIOUR

By: Er. Ishwar SinghDr. Bratpal Singh

CONTENTS :• Management• Nature and Operational Areas of

Management• Operating Systems of Management• Role of Skills in a Professional Manager• Planning Management• Limitation and Domains in Management by

Objectives• Decision Making• Problems Solving Techniques and Processes• Controlling: Process and Techniques• Perception Management• Management by Impression• Management Through Effective

Communication Techniques

• Project Management Tools• Organisational Behaviour• Organisational Structure and Design• Individual Determinants of Organisational

Behaviour• Learning• Critical Thinking and Problem Solving• Motivation for Management• Job Anxiety and Stress• Group/Team Dynamics• Analysis of Interpersonal Relations• Leadership Theories, Styles and Influence• Change Management• Management of Organisational Conflicts• Previous Year Question Papers• Index

CONTENTS :• History of Science and Technology• Social Realities and Institutions of India• Inter Relationship Between Science and

Technology• Impact of Technology• Man-Made Hazards (Pollution of

Environment)• Technology and Productivity• Technology, Culture and Social Changes• Technology, Economy and Society

Behavioural Linkage• Policy Application with Human Face for

the Future Development

• Abbreviations• Model Test Papers• Examination Papers• Index

Size : 20 x 26/8Pages : 180 Approx.ISBN : 978-81-89757-67-0

Price Rs. : 125/-Reprint : 2012

IMPACT OFSCIENCE and

TECHNOLOGYON SOCIETY

By: Ishwar Singh

CONTENTS :• Management Art, Science and Profession• Development (Evolution) of

Management Thoughts• Staffing: Personnel Management-

Manpower Planning-Interview-Recruitment-Training and Promotion

• Production, Planning and ControlManagement

• Material Management• Inventory Control• Marketing Management• Financial Management

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-082-6

Price Rs. : 195/-First Edition : 2010-11

FUNDAMENTALS OFMANAGEMENT

By: Dr. R.C. Bhatia

• Capital Structure• Advertising• Consumer Behaviour• Human Resources Management• Leadership• Communication• Motivation• Index

Size : 20 x 26/8Pages : 275 Approx.ISBN : 978-93-5014-097-0

Price Rs. : 165/-First Edition : 2011

BASICS OFMANAGEMENT

By: A.K. GuptaR. Goyal

CONTENTS :• Management• Human Resource Management• Financial Management• Materials Management• Marketing Management• Organization• Leadership• Motivation• Ethics and Values• Customer Relationship Management• Taxation

• Wages and Incentives• Labour Laws• Intellectual Property Rights• Total Quality Management• Management Information System• Drugs• Traffic Laws• Index

MECHANICAL ENGINEERING

S.K. KATARIA & SONS 105

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-224-0

Price Rs. : 165/-Reprint : 2013

MAINTENANCEENGINEERING

ANDMANAGEMENT

By: Subhash Chandra

Size : 20 x 30/8Pages : 220 Approx.ISBN : 978-93-5014-216-5

Price Rs. : 165/-Reprint : 2013

GENERIC SKILLSAND

ENTREPRENEURSHIPDEVELOPMENT

By: A.K. Gupta

Size : 20 x 30/8Pages : 230 Approx.ISBN : 978-93-5014-282-0

Price Rs. : 175/-Reprint : 2013

INSTALLATIONTESTING AND

MAINTENANCE

By: Mohd. Yonus Khan

CONTENTS :• Generic Skills• Managing Self for Self Development• Managing Self-Physical• Managing Self-Intellectual Development• Managing Self-Psychological• Team Management• Task Management• Problem Solving• Entrepreneurship

CONTENTS :• Maintenance Management and

Breakdown Maintenance Planning• Fundamentals of the Theory of Damages• Replacement Planning• Maintenance Strategies• Maintainability• Reliability and Maintainability• Advances in Maintenances: RCM, ZERO

Breakdown and TPM• Maintenance Planning• Pert

• Computer Aided Maintenance Planning,Installation and Materials Planning

• Case Studies• Previous Year Question Paper• Index

• Entrepreneurship Support Systems• Small Scale Industry• Project Report• Index

CONTENTS :• Safety Practices• System of Limits and Fits• Installation of Machine Tools• Miscellaneous Examples of Installation• Machine Tool Testing• Lubrication• Inspection and Quality Control• Reliability and Maintainability• Maintenance• Maintenance Planning, Storage of Parts

and Replacement Analysis

• Engineering Materials• Corrosion-Its Control and Chemical

Cleaning• Objective Questions• List of Experiments• Books Referred• Index

Size : 20 x 26/8Pages : 275 Approx.ISBN : 978-93-5014-394-0

Price Rs. : 165/-First Edition : 2013

BASICS OFNON-

DESTRUCTIVETESTING

By: Lari & Kumar

CONTENTS :• Introduction to NDT• Visual Inspection• Penetrant Testing• Magnetic Particle Testing• Radiographic Inspection• Ultrasonic Testing• EDDY Current Testing• Appendix A to E• Model Test Papers• Index

COMPUTERS

S.K. KATARIA & SONS106

CONTENTS :• Introduction to DBMS• Data Modeling Using the E-R Model• Relational Data Model and Language• Introduction to SQL• Normalization• Transaction Processing Concepts• Serializability and Deadlock Handling• Concurrency Control Techniques• Competitive Quiz

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-81-89757-78-6

Price Rs. : 265/-Reprint : 2013

DATABASEMANAGEMENT

SYSTEM

By: P. K. Yadav

• A Practical Approach to SQL• Tutorial Exercises• Previous Years Question Papers• Index

CONTENTS :• Concepts of DBMS• Data Modelling Using The E-R Model• Introduction to Data Model• Introduction to SQL and its Components• Introduction to PL/SQL• Normalization• Oracles 8 Architecture• Transaction Processing Concepts• Concurrency Control Techniques• Buffer Management and Query

Processing

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-295-0

Price Rs. : 195/-Second Edition : 2012

CONCEPTS OFDATABASE

SYSTEM

By: P.K. YadavA.K. Goyal

• A Practical Approach to SQL• Competitive Quiz• Tutorial Exercises• Index

CONTENTS :• Introduction and Software Project

Planning• Project Organization, Scheduling and

Management Issues• Project Monitoring and Control• Technical Communication• Software Quality Assurance (SQA) and

Testing• Project Management and Project

Management Tools• Appendices• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-80027-36-4

Price Rs. : 250/-Reprint : 2013

SOFTWAREPROJECT

MANAGEMENT

By: Rajiv Chopra

CONTENTS :• Introduction to DBMS• Data Modelling Using the E-R- Model• File Organization• Relational Data Model and Language• Introduction to Query Language• Normalization• Transaction Processing Concept• Introduction to Concurrency Control

and Recovery System• Introduction to Distributed Database

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-34-0

Price Rs. : 210/-Third Edition : 2011

INTRODUCTION TODATABASE

MANAGEMENTSYSTEM

By: P.K. Yadav

• Competitive Quiz• A Practical Approach to SQL• Tutorial Exercises• Previous Years Question Papers• Index

COMPUTERS

S.K. KATARIA & SONS 107

CONTENTS :• Introduction to Software Testing• Software Verification and Validation• Black Box (or Functional) Testing

Techniques• White Box (or Structural) Testing

techniques• Gray Box Testing• Reducing the Number of Test Cases• Levels of Testing• Object Oriented Testing• Automated Testing

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-81-89757-90-8

Price Rs. : 300/-Fourth Edition : 2012

SOFTWARETESTING

By: Er. Rajiv Chopra

• Test Point Analysis (TPA)• Testing Your Websites-Functional and

Non-Functional Testing• Regression Testing of a Relational

Database• A Case Study of Testing of E-Learning

Management Systems• Appendices• Examination Question Papers• Index

Size : 20 x 30/8Pages : 440 Approx.ISBN : 978-93-5014-003-1

Price Rs. : 250/-First Edition : 2010

SOFTWAREENGINEERINGAND PROJECTMANAGEMENT

By: Er. Rajiv Chopra

CONTENTS :• Software Product and Process

Characteristics• Requirements Elicitation• Software Design• Software Analysis and Testing• OOA and OOD• Software Maintenance• Software Project Management• Appendices• Previous Years Examination Papers• Index

CONTENTS :• Introduction to Software Engineering• Requirements Elicitation• Modeling with UML• Architecture• Construction• Analysis• Testing• Appendices• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-000-0

Price Rs. : 240/-Third Edition : 2013

OBJECTORIENTEDSOFTWARE

ENGINEERING

By: Er. Rajiv Chopra

CONTENTS :• Introduction• Memory• 8-Bit Microprocessors (8085)• 8085 Addressing Modes and Instruction

Set with Programming• 16-Bit Microprocessor (8086)• 8086-ALP (Assembly Language

Programming)• Streaks and Subroutines, Delays• Peripheral Interfacing• Appendices

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-5014-104-5

Price Rs. : 250/-Reprint : 2012

INTRODUCTION TOMICROPROCESSOR

By: Er. Rajiv Chopra

• Examination Papers• Bibliography• Index

COMPUTERS

S.K. KATARIA & SONS

CONTENTS :• Introduction to Graphic Systems• Scan Conversion and Output Primitives• Two Dimensional Transformation• Windowing and Clipping Techniques• Three Dimensional Graphics• Perspective and Parallel Transformations• Director• Appendices• Glossary• Model Question Papers• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 81-89757-50-4

Price Rs. : 160/-Reprint : 2012

COMPUTERGRAPHICS

By: Adesh K. Pandey

Size : 20 x 26/8Pages : 350 Approx.ISBN : 81-89757-14-8

Price Rs. : 195/-Reprint : 2013

AN INTRODUCTION TOAUTOMATATHEORY &FORMAL

LANGUAGES

By: Adesh K. Pandey

• Lexical and Syntax Analysis• Tractable and Intractable Problems• Introduction to Derivation Languages• Introduction to Cellular Automata• Appendix: Test Your Skills of Automata• Index

CONTENTS :• Introduction to Concept of Automata• Finite Automata• Automata with Output• Regular Expression and Languages• Properties of Regular Languages• Context-Free Grammars and Languages• Simplified Context-Free Grammar and its

Normal Form• Pushdown Automata• Properties of Context-Free Languages• Turing Machine• Recursive Function Theory• The Chomsky Hierarchy

CONTENTS :• Requirements Engineering• Size Estimation• Effort, Schedule and Cost Estimation• Software Requirements and Estimation• Industry Resources• Appendices• Appendices A to G• Bibliography• Question Papers• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-201-1

Price Rs. : 195/-First Edition : 2011

REQUIREMENTSAND

ESTIMATIONTECHNIQUES

By: Er. Rajiv Chopra

CONTENTS :• Introduction to Software Project

Management• Stepwise Project Planning• Project Evaluation and Estimation• Activity Planning• Risk Management• Resource Allocation• Monitoring the Control• Managing Contracts and People• Software Quality• Study of any SPM Software-Project 2000

or Equivalent

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-185-4

Price Rs. : 225/-First Edition : 2011

FUNDAMENTALS OFSOFTWARE

PROJECTMANAGEMENT

By: Rajiv Chopra

(A PRACTICAL APPROACH)

• Appendices• Model Test Papers• Examination Paper• Index

108

COMPUTERS

S.K. KATARIA & SONS 109

FUNDAMENTALS OFCOMPILER

DESIGN

• Intermediate Code Generation• Error Detection and Recovery• Code Optimization and Generation• Appendix• Index

CONTENTS :• Introduction to Compilers• Introduction to Finite Automata and

Regular Expression• Lexical Analysis• The Syntactic and Semantic Specification

of Languages• Top-Down Parsing• Bottom-up Parsing• Syntax-Directed Translation• Type Checking• Storage Management• Symbol Table ManagementBy: Adesh K. Pandey

Size : 20 x 30/8Pages : 205 Approx.ISBN : 978-93-80027-75-3

Price Rs. : 150/-First Edition : 2009

FUNDAMENTALS OFELECTRONICS

COMMERCE

By: Adesh K. Pandey

CONTENTS :• Introduction to E-Commerce• E-Commerce Framework• World Wide Web• World Wide Web and Interactive

Applications• Web Security, Firewall and Transaction

Security• Transaction Security and Encryption• Electronics Payment System• Electronic Commerce and Banking• Retailing and Supply Chain Management• E-Business Roadmaps and Strategy

• E-Commerce Issues, Laws and Policies• Implementation of E-Commerce• Appendices• Index

(PTU)

Size : 20 x 26/8Pages : 425 Approx.ISBN : 81-88458-47-3

Price Rs. : 215/-Reprint : 2012

INTRODUCTION TOAUTOMATATHEORY &FORMAL

LANGUAGES

By: Adesh K. Pandey

• Recursive Function Theory• The Chomsky Hierarchy• Tractable and Intractable Problems• Appendix: Test Your Skills of Automata• Model Question Papers• Unsolved Examination Papers• Solved Examination Papers• References• Index

CONTENTS :• Introduction to Concept of Automata• Finite Automata• Automata with Output• Regular Expression and Languages• Properties of Regular Languages• Context-Free Grammars and Languages• Simplified Context-Free Grammar and

it’s Normal Form• Pushdown Automata• Properties of Context-Free Languages• Turing Machine

(For UPTU)

Size : 20 x 26/8Pages : 600 Approx.ISBN : 81-89757-17-2

Price Rs. : 250/-Reprint : 2012

CONTENTS :• Introduction to Concepts of Automata• Finite Automata• Mealy and Moore Machines• Regular Sets and Regular Expressions• Properties of Regular Language• Context-Free Grammars and Languages• Simplified Context-Free Grammar and its

Normal Form• Pushdown Automata• Properties of Contest-Free Languages• Turing Machines

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-80027-98-2

Price Rs. : 185/-Second Edition : 2011

THEORY OFCOMPUTATION

By: Adesh K. Pandey

• Chomsky Hierarchy• Tractable and Untractable Problems• Appendix : Test Your Skills• Model Question Papers• Index

COMPUTERS

S.K. KATARIA & SONS110

Size : 20 x 26/8Pages : 325 Approx.ISBN : 978-93-5014-005-5

Price Rs. : 175/-First Edition : 2010

THEORY OFAUTOMATA ANDCOMPUTATION

By: Adesh K. Pandey

CONTENTS :• Introduction to Concept of Automata• Finite Automata• Mealy and Moore Machines• Regular Sets and Regular Expressions• Properties of Regular Languages• Context-Free Grammars and Languages• Simplified Context-Free Grammar and

it’s Normal Form• Pushdown Automata• Properties of Context-Free Languages• Turing Machines

• Linear Bounded Automata and ContextSensitive Languages

• Tractable and Untractable Problems• Appendix: Test Your Skills• Model Question Papers• Index

(For RTU)

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-016-1

Price Rs. : 210/-Second Edition : 2011

INTERNETFUNDAMENTALS

By: Adesh K. Pandey

CONTENTS :

Unit-I: Electronic Mail and Internet• Electronic Mail• Introduction to Network and Internet• Working of Internet

Unit-II: World Wide Web• World Wide Web• HTML and XML• Web Site Designing

Unit-III: Languages• JAVA Script• Servers

Unit-IV: Privacy and Security Topics• Web Security and Firewall• Privacy and Encryption Schemes• Appendices• Examination Papers (Unsolved)• Previous Years Examination Papers• Index

CONTENTS :• Introduction to E-Commerce• E-Commerce Framework• Architectural Framework of

E-Commerce• Network Infrastructure for E-Commerce• Mobile Commerce• Web Security• Encryption• Electronic Payment Systems• Net Commerce

Size : 20 x 30/8Pages : 200 Approx.ISBN : 978-81-89757-81-6

Price Rs. : 150/-Reprint : 2012

CONCEPTS OFE-COMMERCE

By: Adesh K. Pandey

• E-Commerce Issues, Laws and Policies• Implementation of E-Commerce• Appendices• Examination Papers• Index

CONTENTS :• Introduction to Compiler• Introduction to Finite Automata and

Regular Expression• Lexical Analysis• The Syntactic and Semantic Specification

of Languages• Top-Down Parsing• Bottom-up Parsing• Syntax-Directed Translation• Storage Management• Symbol Table Management

Size : 20 x 26/8Pages : 450 Approx.ISBN : 978-93-5014-126-7

Price Rs. : 245/-Reprint : 2013

CONCEPTS OFCOMPILER

DESIGN

By: Adesh K. Pandey

• Intermediate Code Generation• Error Detection and Recovery• Code Optimization and Generation• Appendix: Quick Review of Compiler

Design Concepts• Previous Years Examination Papers• Index

COMPUTERS

S.K. KATARIA & SONS 111

Size : 20 x 30/8Pages : 295 Approx.ISBN : 978-93-5014-250-9

Price Rs. : 220/-Reprint : 2012

INTRODUCTION TOE-COMMERCE

AND ERP

By: Adesh K. Pandey

CONTENTS :Part-A: Introduction to E-Commerce• Introduction to E-Commerce• Internet and E-Commerce• Electronic Payment Methods• Electronic Commerce Providers• Digital Payment System and Digital

Currencies• Electronic Data InterchangePart-B: Introduction to ERP• Introduction to ERP• Management Information System (MIS)• Internet and ERP• ERP Functional Modules• Information System Prospective of ERP

• Implementation of ERP• Methodology of ERP Design• Managerial Issues in ERP• Appendix : Present and Future of ERP

Market• Previous Years Examination Papers

(Unsolved)• Previous Years Examination Papers

(Solved)• Index

CONTENTS :• Internet Basics• Internet Connectivity• World Wide Web• Internet Security• Internet Applications• Developing Portals Using HTML• Using Front Page• Client-Side Scripting : Using Java Script• Server-Side Scripting• Active Server Page (ASP)• Java Server Page (JSP)

Size : 20 x 30/8Pages : 310 Approx.ISBN : 978-93-5014-064-2

Price Rs. : 175/-Reprint : 2011

INTERNETAND WEB

DESIGNING

By: Adesh K. Pandey

• Developing Interactive Web Pages• Appendices• Model Test Paper• Index

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-138-0

Price Rs. : 210/-First Edition : 2011

A TEXTBOOK OFCOMPILER

DESIGN

By: Adesh K. Pandey

(For RGTU)

CONTENTS :• Introduction• Lexical Analysis• Syntax Analysis• Top-Down Parsing Techniques• Bottom-Up Parsing Techniques• Syntax-Directed Translation• Type Checking• Run-Time Environment• Symbol Table Management• Intermediate Code Generation• Error Detection and Recovery

• Code Optimization and Generation• Appendix : Quick Review of Compiler

Design Concepts• Index

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-026-0

Price Rs. : 165/-First Edition : 2010

NETWORKSECURITY ANDADMINISTRATION

By: Adesh K. Pandey

CONTENTS :• Introduction to Network Security• Threats to Security and How Much

Security• State of Art Network and Security• Firewalls• Intrusion Detection System (IDS)• Authentication and Encryption• Visual Private Network (VPN)• Virus, Trojans and Worms• Server Management for Applications

and Database• Disaster, Prevention and Recovery

• Windows Network Administration• Linux Administration• Glossary• Objective Type Questions with

Answers• Index

COMPUTERS

S.K. KATARIA & SONS112

CONTENTS :Section-A:• Finite Automata• Regular Expression• Introduction to MachinesSection-B:• Properties of Regular Sets• Context-Free Grammars and Languages• Simplified Context-Free Grammar and its

Normal FormSection-C:• Pushdown Automata• Properties of Context-Free Languages

Size : 20 x 26/8Pages : 325 Approx.ISBN : 978-93-5014-157-1

Price Rs. : 220/-Reprint : 2012

THEORY OFAUTOMATA

ANDCOMPUTATION

By: Adesh K. Pandey

• Turing MachineSection-D:• Chomsky Hierarchies• Computability and Recursive Function

Theory• Short Questions with Answers• Index(For MDU)

CONTENTS :• System Concepts• Overview of System Analysis and Design• Preliminary Investigations• Feasibility Study• Requirement Specifications and Analysis• Detailed Design• Input/Output Design• System Development and

Implementation• Testing and Quality Assurance• System Audit and Security• Object Oriented System Modeling

Size : 20 x 26/8Pages : 300 Approx.ISBN : 81-88458-92-9

Price Rs. : 165/-Reprint : 2009

SYSTEMANALYSIS& DESIGN

By: S.K. Jha

• Electronic Commerce• Glossary• Bibliography• Model Question Papers• Examination Papers with Solutions• Index

CONTENTS :Section-A: An Overview of ComputerSystems and Operating Systems• Introduction to Computer• Input/Output Devices• Radix Number Systems• Operating System BasicsSection-B: Basic Introduction to SystemSoftware, Programming Concepts andComputer Networks• Programming Language• Programming Concepts• Internet BasicsSection-C: An Overview of C, Structureand Union in C• C-Fundamentals• Operators and Expressions

Size : 20 x 30/8Pages : 550 Approx.ISBN : 81-88458-58-9

Price Rs. : 275/-Eighth Edition : 2012

FUNDAMENTALS OFCOMPUTER ANDPROGRAMMING

IN C

By: S.K. Jha

• Data Input-Output• Constants, Variables and Control

Statements• Structures, Unions and PreprocessorsSection-D: Arrays, Functions, Pointersnic,Dynamic Memory Allocation and FileManagement in C• Arrays• Functions and Strings• Pointers• Dynamic Memory Allocation and File

Management in C• Appendices• Model Question Papers• B.E. Examination Solved Paper• Bibliography• Index

Size : 20 x 26/8Pages : 375 Approx.ISBN : 978-93-5014-153-3

Price Rs. : 220/-Second Edition : 2012

ELEMENTS OFCOMPILER

DESIGN

By: Adesh K. Pandey

(For MDU)

CONTENTS :• Introduction to Compilers• Introduction to Finite Automata and

Regular Expression• Lexical Analysis• Syntax Analysis• Top-Down Parsing Techniques• Bottom-Up Parsing Techniques• Syntax-Directed Translation• Symbol Table Management• Error Detection and Recovery• Intermediate Code Generation• Code Optimization and Generation

• Appendix : Quick Review ofCompiler Design

• Examination Papers• Solved Examination Paper• Index

COMPUTERS

S.K. KATARIA & SONS 113

CONTENTS :• Introduction to Computer Systems• Hardware Organization of PC• Interfacing Devices and

Bus Standards & Architectures• The Video Display of the PC• The Keyboard of the PC• Disk Drives• Peripheral Devices• Power Supplies• The BIOS and DOS Services• Advanced Microprocessors• Interface Standards

• Introduction to RISC Processor• US Architecture & Multiprocessor

Systems and Mini Computers• Previous Board Examination Papers• Index

Size : 20 x 30/8Pages : 300 Approx.ISBN : 81-85749-50-7

Price Rs. : 150/-Reprint : 2010

PCORGANISATION

By: S.K. Chauhan

NEURALNETWORKS AND

FUZZY LOGIC

CONTENTS :• Introduction• Introduction to Neural Networks• Artificial Neural Model• Single Layer Feedforward Neural

Network• Multilayer Feedforward Neural

Networks• Associative Memory Network• Classical and Fuzzy Sets• Fuzzy Logic System Components

By: Vinoth KumarR. Saravana Kumar

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-78-4

Price Rs. : 185/-Reprint : 2010

PC UPGRADINGMAINTENANCEAND TROUBLE

SHOOTING GUIDE

• BIOS Installation• Upgrading• Memory and Storage Devices• Hard Disks• Hard Disk Installation & Maintenance• Floppy Drives• Modems and Serial Interfaces• CD ROM• Printers and Plotters• CVT and UPS

CONTENTS :• Introduction to Computer Systems• Motherboards• Busslots and I/O Cards• Power Supplies• Microprocessor• Preventive Maintenance and

Troubleshooting• Memory• Input Devices• Video Display Hardware and

Specification• Basic Device Configuration and

Installation

By: S.K. ChauhanSize : 20 x 30/8Pages : 450 Approx.ISBN : 81-85749-36-1

Price Rs. : 210/-Reprint : 2012

• Neural Network Application• Solved Examination Papers• References• Index

CONTENTS :• Algorithm and Programming

Development• Programming Language• C-Fundamentals• Program Structure• Operators and Expressions• Constants, Variables and Control

Statements• Functions and Strings• Arrays• Pointers• Structure, Unions and Preprocessors

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-81-89757-70-0

Price Rs. : 250/-Reprint : 2012

PROGRAMMINGIN C

By: S.K. Jha

• Data Structures and Dynamic MemoryAllocations

• Data File Operations• Appendices• Bibliography• Index

COMPUTERS

S.K. KATARIA & SONS114

CONTENTS :• Introduction to Computers• Memories• Secondary Storage Devices• Computer Peripherals : Input Devices• Computer Peripherals : Output

Devices• Disk Operation System DOS• Number System• Software Concepts• Program Development Tools :

Algorithms and Flowcharts• Windows-XP• MS Word• Information Technology• Introduction to C++• Basics of C++• Structure of a C++ Program• Data Types in C++

• Operators• Flow Control• Functions• Arrays• Structures• Classes and Inheritance• Operator Overloading• Pointers• Virtual and Friend Functions• Input Output with Files• Additional C++ Programs• Computer Oriented Abbreviations

and Acronyms• Model Test Papers• Previous Years Questions Papers• Previous Years Questions Papers

with Solutions• Bibliography• Index

FUNDAMENTALS OFCOMPUTER

PROGRAMMINGAND INFORMATION

TECHNOLOGY

By: Gurdip SinghGaurav Sharma

Size : 20 x 30/8Pages : 350 Approx.ISBN : 81-88458-32-5

Price Rs. : 250/-Third Edition : 2010-2011

JAVAPROGRAMMING

By: Piyush ChoudharySize : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-298-1

Price Rs. : 185/-First Edition : 2012

CONTENTS :• Introduction• Soft Computing• Artificial Intelligence Problems and

Techniques• Introduction to Neural Networks• Artificial Neural Model• Single Layer Feedforward Neural

Networks• Multi-Layer Feedforward Neural

Networks• Associative Memory Network• Counter Propagation Network

FUNDAMENTALS OFSOFT

COMPUTING

By: K. Vinoth Kumar

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-116-8

Price Rs. : 265/-Second Edition : 2012

• Hopfield Networks• Adaptive Resonance Theory• Classical and Fuzzy Sets• Fuzzy Logic System Components• Neural Network Application• Genetic Algorithms• Neuro-Fuzzy Systems• Fuzzy Arithmetic• Fuzzy Logic• Uncertainty Based Information• References• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-007-9

Price Rs. : 230/-Reprint : 2012

SOFTCOMPUTING

By: K. Vinoth Kumar

CONTENTS :• Introduction• Introduction to Neural Networks• Artificial Neural Model• Single Layer Feedforward Neural

Network• Multilayer Feedforward Neural

Networks• Associative Memory Network• Classical and Fuzzy Sets• Fuzzy Logic System Components• Neural Network Application

• Genetic Algorithms• Neuro-Fuzzy Systems• Fuzzy Arithmetic• Fuzzy Logic• Uncertainty Based Information• References• Index

CONTENTS :Unit-I:• Introduction to JAVA• Object Oriented Programming in JAVAUnit-II:• Abstract Window Toolkig• Event Handling in AWT• Applets• Introduction to SwingUnit-III:• Multithreading in JAVA• Exception HandlingUnit-IV:• Exploring JAVA Input/Output• JAVA Database Connectivity

Unit-V:• JAVA Networking• Remote Method InvocationUnit-VI:• Programming Approach• Appendix• Examination Papers• Index

COMPUTERS

S.K. KATARIA & SONS 115

CONTENTS :Unit-I:• Introduction to Computer and

Programming Language• Number Systems and Conversion MethodsUnit-II:• Overview of C• Data Types and Storage Classes• Operators and Expressions• Input and Output OperationsUnit-III:• Conditional Program Execution• Program Loops and Iteration• Modular Programming,

Size : 20 x 30/8Pages : 500 Approx.ISBN : 81-88458-67-8

Price Rs. : 335/-Reprint : 2012

COMPUTERCONCEPTS ANDPROGRAMMING

IN C

By: Amit Kumar Mishra

Unit-IV:• Arrays• Structures• Pointers• Dynamic Memory Allocation and

Linked ListUnit-V:• Searching and Sorting• The Standard C Preprocessor• The Standard C Library• Appendices• Model Test Papers• Previous Years Examination Papers• Index

CONTENTS :Unit-I: Introduction• Fundamental of Computer Design and

the Concept of Computer Architecture• Parallel Computing: Architecture and

Interconnection Networks• Performance Matrices, Measures and

Speedup Performance LawsUnit-II: Pipelining and Memory Hierarchy• Instruction Set Principles• Pipelining and Superscalar Techniques• Memory Hierarchy DesignUnit-III: Thread and Process LevelParallel Architecture• Introduction to Mind Architecture and

Clustering

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-80027-49-4

Price Rs. : 250/-Reprint : 2010

ADVANCEDCOMPUTER

ARCHITECTURE

By: Amit Kumar Mishra

• Introduction to SIMD Architecture andVector Architecture

Unit-IV: Parallel Algorithm• PRAM Algorithm• Matrix Multiplication and Solving Linear

SystemsUnit-V: Developing Parallel ComputingApplications• OpenMP Implementation• Message Passing Interface• Appendices• Examination Paper• Index

CONTENTS :Unit-I:• Information Systems• Security in Mobile and Wireless

ComputingUnit-II:• Security Threats to E-CommerceUnit-III:• Model of Cryptographic Systems• Network Security• Virtual Private Networks

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-092-5

Price Rs. : 195/-Reprint : 2011

INFORMATIONSECURITY AND

CYBER LAW

By: Amit Kumar Mishra

Unit-IV:• Security Metrics• Appendix : Glossary• Index

BASIC COMPUTERENGINEERING

CONTENTS :Unit-I:• Computer System and Storage DevicesUnit-II:• Operating System and Programming

LanguagesUnit-III:• C++ ProgrammingUnit-IV:• Database Management SystemUnit-V:• Computer NetworkingBy: Amit Kumar Mishra

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-093-2

Price Rs. : 250/-Second Edition : 2012

• Appendices• Examination Papers• Index

COMPUTERS

S.K. KATARIA & SONS116

(UTU)

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-083-3

Price Rs. : 250/-First Edition : 2010

FUNDAMENTALS OFCOMPUTER ANDPROGRAMMING

By: Amit Kumar Mishra

CONTENTS :Unit-I:• Introduction to Computer• Data Representation and Number

System• Introduction to Operating SystemUnit-II:• Concept of Flow Chart and AlgorithmUnit-III:• Overview of C• Data Types and Storage Classes• Operators and Expressions• Input and Output Operations• Conditional Program Execution

• Program Loops and Iteration• Modular ProgrammingUnit-IV:• Arrays• Strings• Structures and UnionUnit-V:• Pointers and Dynamic Allocation

Functions• File Operations• The Standard C Preprocessor• Appendices• Index

CONTENTS :Unit-I: Introduction to Computer• Computer System and Storage Devices• Data Representation and Number

SystemUnit-II: Introduction to OS and OfficeAutomation• Introduction to Operating System• Office AutomationUnit-III: Introduction to AutoCAD• AutoCAD

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-045-1

Price Rs. : 225/-First Edition : 2010

INTRODUCTION TOCOMPUTERSYSTEMS

By: Amit Kumar Mishra

(For GGSIPU)

Unit-IV: Web Technologies• Web Technology• Previous Years Examination Papers• Index

CONTENTS :• Fundamental of Computer Design and

the concepts of Architecture• Parallel Computing : Architecture and

Interconnection Networks• Performance Matrices, Measures and

Speedup Performance Laws• Instruction Set Principles• Memory Hierarchy Design• Pipelining and Superscalar Techniques• Introduction to Simd Architecture and

Vector Architecture

ADVANCEDCOMPUTER

ARCHITECTURE

By: Amit Kumar Mishra

• Appendices• Examination Papers• Index

CONTENTS :• Introduction and Overview• Register Transfer and Microoperation• Basic Computer Organization• Microprogrammed Control Unit and

Central Processing• Computer Arithmetic• Input-output Organization• Memory Organization• Appendices• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-177-9

Price Rs. : 195/-First Edition : 2011

COMPUTERARCHITECTURE

By: Amit Kumar Mishra

Size : 20 x 30/8Pages : 315 Approx.ISBN : 978-93-5014-174-8

Price Rs. : 230/-First Edition : 2011

COMPUTERS

S.K. KATARIA & SONS 117

CONTENTS :Unit-I: Procedural / Structural and OOP• Object Oriented ParadigmUnit-II: Programming and Language• Introduction of C++

(with Brief Introduction of C)• Beginning with C++ Program

(with Brief Description of C Program)• Control Flow• Function• Arrays and Strings• Structure and Unions• Preprocessor and ManipulatorUnit-III: Object Oriented Programming• Classes and Objects

• Constructor and Destructors• Inheritance• Operator Overloading• Pointer in C++• Polymorphism, Virtual Function and

Friend Function• File and StreamUnit-IV: Advanced C++• Templates and Exception Handling• Software Development Systems• Data Structure in C++• Graphics in C++• Appendices• Index

THINKING INC++

By: Sunil K. Pandey

CONTENTS :• Software Engineering• Software Life Cycle Models• Software Measurement and Matrices• Software Planning• Software Cost• Requirement Engineering• Software Design• Verification and Validation• Testing• Coding• Software Maintenance• Configuration Management• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-80027-76-0

Price Rs. : 160/-Reprint : 2011

FUNDAMENTALS OFSOFTWARE

ENGINEERING

By: Bali-Bali

CONTENTS :• Software Engineering• Software Life Cycle Models• Requirement Engineering• Verification and Validation• Software Design• Software Measurement and Matrices• Software Testing• Coding• Software Maintenance• Re-Engineering

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-80027-19-7

Price Rs. : 250/-Reprint : 2012

SOFTWAREENGINEERING

By: Bali-Bali

• Software Cost• Software Risk• Software Reliability• Special Topics in Software

Engineering• Objective Type Questions• Programms• Appendix• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 410 Approx.ISBN : 81-85749-64-7

Price Rs. : 250/-Reprint : 2011-2012

CONTENTS :Unit-I: Procedural/Structured and Oop• Object Oriented ParadigmUnit-II : Programming and Language• Introduction of C++(with Brief Introduction

of C)• Beginning with C++ Program (with Brief

Description of C Program)• Control Flow• Function• Arrays and Strings• Structure and Unions• Preprocessor and ManipulatorUnit-III: Object Oriented Programming• Classes and Objects

By: Sunil K. PandeyRajesh Kochher

OBJECTORIENTED

PROGRAMMINGWITH C++

Size : 20 x 30/8Pages : 415 Approx.ISBN : 978-93-80027-56-2

Price Rs. : 230/-Seventh Edition : 2011

• Constructor and Destructors• Inheritance• Operator Overloading• Pointer in C++• Polymorphism, Virtual Function and Friend

Function• File and StreamUnit-IV: Advanced C++• Templates and Exception Handling• Software Development Systems• Data Structure in C++• Graphics in C++• Appendices• Index

COMPUTERS

S.K. KATARIA & SONS118

CONTENTS :Part-I: C/C++ Procedure OrientedApproach• Procedure Oriented Concepts• C-I/O• Preprocessor• Control Statements• Array• Function• Structure and Union• PointerPart-II: C++ Object Oriented Approach• Object Oriented Concepts• Advanced Object Oriented Concepts• C++ Streams & File Handling

Size : 20 x 30/8Pages : 450 Approx.

Price Rs. : 230/-Third Edition : 2007-2008

PROGRAMMINGLANGUAGES

By: Nitin Upadhyay

Part-III: Windows Programming,VC++ Programming• Windows Programming-Procedure

Oriented• Predefined Windows• Message Box• Resources• Mouse and Key Messages• Dialog Box• Window Programming-Object Oriented• Object Linking and Embedding• Activex Control• The .NET Foundation• Appendices• Index

CONTENTS :• Introduction to Computer• Operating System and Working

Knowledge of Computer System• Problem Solving and Program

Planning• Overview of C++ with Operator

and Expression• Beginning with C++• Control Structure• Function• Arrays and Strings

FUNDAMENTALS OFCOMPUTER

PROGRAMMINGAND IT

By: Sunil K. PandeyV.K. Jain

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-164-9

Price Rs. : 230/-Fourth Edition : 2011

• Concept of Object OrientedProgramming

• Classes abd Objects• Constructor and Destructors• Basics of File Handling• Sample Question Papers• Index

CONTENTS :• Introduction to AUTOCAD• Drawing Simple Objects• Basic Concept of Drawing• Accuracy and Speed• Advanced Drawing Commands• Editing Object• Text and Unit• 3D Drawing–An Introduction• Internet Utilities• Index

By: Sunil K. Pandey

LEARNAUTOCAD

(IN A EASY WAY)

Size : 23 x 36/16Pages : 150 Approx.ISBN : 81-85749-78-7

Price Rs. : 75/-Reprint : 2008

CONTENTS :• Introduction to Data• Introduction to Program Design• Growth of Function• Analysing Algorithm Control Structures• Recurrences• Quick Reference C-I• Quick Reference C-II• Quick Reference C-III• Quick Reference C-IV• Quick Reference C-V• Pointer• Linked Lists

Size : 20 x 30/8Pages : 750 Approx.ISBN : 81-88458-81-3

Price Rs. : 250/-Reprint : 2009-10

DATASTRUCTURES

ANDALGORITHMS

USING C

By: Nitin Upadhyay

• Stacks• Queue• Shorting in Linear Time• Trees• Heap• Searching and Advanced Search Tree• Graphs• String Matching• Augmenting Data Structure• NP-Completeness• Data Structures and Algorithm Using C• Appendices• Index

COMPUTERS

S.K. KATARIA & SONS 119

CONTENTS :Unit-One:• OSI Reference Model and Network

Architecture• Introduction to Physical LayerUnit-Two:• Data Link Layer and Protocols• Medium Access SublayerUnit-Three:• Network LayerUnit-Four:• Transport Layer, Session Layer and

Presentation Layer

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-81-89757-62-5

Price Rs. : 285/-Fifth Edition : 2012

COMPUTERNETWORKS

By: Sanjay Sharma

(For UP)

Unit-Five:• Application Layer• World Wide Web (WWW)• Example of Networks• Previous Years Question Papers• Index

CONTENTS :• Computers-An Introduction• Fundamental of Computers• Digital Electronics• Computer Architecture & Organisation• Data Communications & Networking• Computer Hardware Trends• System Software• Operating Systems• Programming Language and C• Database Management Systems• System & Program Development

Methodology• Management Information Systems

Size : 20 x 30/8Pages : 530 Approx.ISBN : 81-85749-38-8

Price Rs. : 275/-Reprint : 2012

QUESTION BANK INCOMPUTER

SCIENCE

By: Nitin UpadhyayM. Ramaswamy

R. Balagurswamy

• Computer and Information System inBusiness

• Computer-Aided Designing &Manufacturing

• Artificial Intelligence• Statistical Techniques in

Computer Science• Data Structure• Computer Peripheral Devices• Selection of Computers• Recent Advancements & Future Trends in

Computer Science• Trouble-Shooting of Computers• Mathematical Preliminaries• Exploring C and C++

CONTENTS :• Algorithm• Growth of Function• Analysing Algorithm Control Structures• Recurrences• Quick Sort• Elementary Data Structure• Amortized Analysis• Heap• Sorting in Linear Time• Median and Order Statistics• Searching and Advanced Search Trees• Dynamic Programming

• Greedy Algorithms• Bracktracking• Branch and Bound• Graphs• String Matching• Augmenting Data Structures• NP-Completeness• Polynomials and the FFT• Randomized Algorithm• Algebraic Computation• Appendices• Previous Years Question Papers• Index

Size : 20 x 26/8Pages : 500 Approx.ISBN : 978-81-89757-93-9

Price Rs. : 250/-Fourth Edition : 2011-2012

THE DESIGN ANDANALYSIS OFALGORITHMS

By: Nitin Upadhyay

Size : 20 x 30/8Pages : 500 Approx.ISBN : 81-89757-83-0

Price Rs. : 275/-Reprint : 2013

ELEMENTS OFCOMPUTERNETWORKS

By: Sanjay Sharma

CONTENTS :Unit-I:• OSI Reference Model and Network

Architecture• Examples of Networks• Data Transmission and Physical LayerUnit-II:• TCP/IP• Application Layer Services• World Wide Web (WWW)Unit-III:• Local Area Networks• LAN Interconnecting Devices

Unit-IV:• Wide Area Network (WANs)Unit-V:• Introduction to Network Management• Previous Years Question Papers• Index

COMPUTERS

S.K. KATARIA & SONS120

By: Sanjay Sharma

CONTENTS :• Data Communication Concepts and

Computer Networks• Physical Layer• The Data Link Layer and Protocols• Lan Standards (IEEE 802 Project)• Network Layer and Protocol• Transport Layer• Application Layer: Traditional and

Modern Applications• Model Question Paper• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-80027-31-9

Price Rs. : 225/-First Edition : 2009

A TEXTBOOK OFCOMPUTERNETWORKS

By: Sanjay Sharma

(For PTU)

CONTENTS :• Introduction to Computer Networks• The Physical Layer• The Data link Layer• The Medium Access Sublayer• The Network Layer• The Transport Layer• The Application Layer• Model Question Paper• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 394 Approx.ISBN : 978-93-80027-00-5

Price Rs. : 240/-Reprint : 2013

COMPUTERNETWORKS

By: Sanjay Sharma

(For GGSIPU)

CONTENTS :• OSI Reference Model and Network

Architecture• Examples of Networks• Data Transmission and Physical Layer• Switching• Data Link Layer and Protocols• Medium Access Sublayer• Sonnet/SDH• Asynchronous Transfer Mode• Network Layer• Network Hardware Components

• Transport Layer, Session Layer andPresentation Layer

• Application Layer Service• Network Security and Multimedia• World Wide Web (WWW)• Queening Theory• Model Question Paper• Index

Size : 20 x 30/8Pages : 700 Approx.ISBN : 978-93-5014-032-1

Price Rs. : 350/-Second Edition : 2012

A COURSE INCOMPUTERNETWORKS

By: Dr. Sanjay Sharma

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-015-4

Price Rs. : 250/-First Edition : 2010

INTRODUCTORYCONCEPTS OFCOMPUTERNETWORKS

Just

Released

CONTENTS :Unit-I:• Introduction to Computer Networks• Examples of Networks• Physical LayerUnit-II:• Application LayerUnit-III:• Transport LayerUnit-IV:• Network Layer and Routing• Network Layer Protocols

(For RTU)

Unit-V:• Sonnet/SDH• Model Question Paper for Practice• Index

COMPUTERS

S.K. KATARIA & SONS 121

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-014-7

Price Rs. : 250/-First Edition : 2010

COMPUTERNETWORKING

By: Sanjay Sharma

CONTENTS :Unit-One:• Introduction to Computer Networks• Examples to NetworksUnit-Two:• Data Link LayerUnit-Three:• Medium Access SublayerUnit-Four:• Network LayerUnit-Five:• Transport Layer, Session Layer and Presentation Layer• Application Layer• Introduction to World Wide Web (www)• Model Question Paper for Practice• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-020-8

Price Rs. : 250/-Reprint : 2012

INTRODUCTION TOCOMPUTERNETWORKS

By: Sanjay Sharma

CONTENTS :Unit-One:• Introduction to Computer Networks• Queuing TheoryUnit-Two:• Data Link LayerUnit-Three:• Medium Access Sublayer• Network Hardware ComponentsUnit-Four:• Network LayerUnit-Five:• Examples of Networks• Glossary• Index

(For RTU)

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-040-6

Price Rs. : 295/-Reprint : 2012

ADVANCEDCOMPUTERNETWORKS

CONTENTS :Unit-One:• Introduction• Review of Physical Layer• Review of Data Link LayerUnit-Two:• Network LayerUnit-Three:• Transport LayerUnit-Four:• Application Layer• World Wide Web (WWW)• Network Security• Glossary• Model Question Paper for Practice• Previous Year Question Papers• Index

By: Sanjay Sharma

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-5014-382-7

Price Rs. : 265/-Sixth Edition : 2013

COMPUTERNETWORKS-I

CONTENTS :

Part-A:• Introduction to Computer Networks• Physical Layer• Data Link Layer• Medium Access SublayerPart-B:• Network Layer• Transport Layer• Application Layer• World Wide Web (WWW)• Model Question Papers• Index

By: Dr. Sanjay Sharma

By: Pankaj Sharma

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-310-0

Price Rs. : 240/-First Edition : 2012

WEBENGINEERING

CONTENTS :

• Information Architecture• Creating Cohesive Web sites• HTML (Hypertext Markup Language)• Style Sheets• Working of Core Events (Block Level

Events, Text Level Events) Using JAVAScript

• JSP (JAVA Server Pages)• ASP (Active Server Page)• Overview of Advance Features of

XML• Appendix• Model Question Paper• Index

COMPUTERS

S.K. KATARIA & SONS122

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-077-2

Price Rs. : 220/-First Edition : 2010-11

WORKING WITHARTIFICIAL

INTELLIGENCE

By: Pankaj Sharma

(Using ANN and Fuzzy Logic)

CONTENTS :• Introduction to Artificial Intelligence• Search Algorithms (Heuristic Algorithm

Verus Solution Guaranteed Algorithms)• Knowledge Representation (Part-I)• Knowledge Representation (Part-II)• Natural Language Processing and

Understanding• Learning, Planning and Implementation

Tools in Expert System• Artificial Neural Network• Fuzzy Logic and Genetic Algorithm

CONTENTS :• Introduction to Artificial Intelligence• Natural Language Processing• Introduction to Search Algorithms• Knowledge Representation and

Reasoning• Knowledge Representation Methods• Machine Learning• Pattern Recognition• Expert System• Introduction to Programming:

Prolog and Lisp• Glossary

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-80027-05-0

Price Rs. : 250/-Reprint : 2012

ARTIFICIALINTELLIGENCE

By: Pankaj Sharma

• Appendix• Previous Years Question Papers (Solved)• Index

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-81-89757-63-2

Price Rs. : 295/-Reprint : 2013

INTRODUCTION TOWEB

TECHNOLOGY

By: Pankaj Sharma

CONTENTS :Chapter-1:• Introduction and Web Development

StrategiesChapter-2:• HTML (Hypertext Markup Language)Chapter-3:• Cascaded Style Sheet (CSS)Chapter-4:• XML (Extensible Markup Language)Chapter-5:• Java Script and AJAXChapter-6:• RMI and VBSCRIPTChapter-7:• CGI and PERLChapter-8:• ASP and ASP.NET (Active Server Page)

Chapter-9:• JSP (Java Server Pages)Chapter-10:• JSP Directives, Standard Actions and COM/

DCOMChapter-11:• PHP (HYPERTEXT Preprocessor)Chapter-12:• Java BeansChapter-13:• ServletChapter-14:• JDBC (Java Database Connectivity)• Appendix• Model Question Papers• Previous Years Question Papers• Index

• Introduction to Programming: Prologand Lisp

• Glossary• Index

CONTENTS :• Internet Principles and Components• HTML (Hypertext Markup Language)• Cascaded Style Sheet (CSS)• XML Document Type Definition• Dynamic HTML with Javascript• Web Services• Web Service Architecture• AJAX (Asynchronous Javascript and

XML)• Distributed Object Based Systems• Web 2.0• Ruby on Rails

Size : 20 x 30/8Pages : 375 Approx.ISBN : 978-93-80027-73-9

Price Rs. : 265/-First Edition : 2013

FUNDAMENTAL OFWEB

TECHNOLOGY

By: Pankaj Sharma

• Web 3.0• Lab Guide• Model Question Paper• Index

COMPUTERS

S.K. KATARIA & SONS 123

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-110-6

Price Rs. : 265/-First Edition : 2011

COMPUTERARCHITECTURE

ANDORGANIZATION

By: Pankaj Sharma

CONTENTS :Chapter-1:• Introduction of Design MethodologyChapter-2:• Processor Level Design and Processor

BasicChapter-3:• Data RepresentationChapter-4:• Instruction SetChapter-5:• Data Path Design

Chapter-6:• Control DesignChapter-7:• Memory OrganizationChapter-8:• Input/Output OrganizationChapter-9:• Introduction to 8085 Microprocessor• Glossary• Appendices• Index

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-111-3

Price Rs. : 285/-Reprint : 2012

COMPUTERORGANIZATION

By: Pankaj Sharma

CONTENTS :Chapter-1:• Computer Organization, Basics Number

System and CodesChapter-2:• Digital Computer Generation and TypesChapter-3:• Register Transfer and Micro-OperationsChapter-4:• Central Processing Unit (Computer

Arithmetic)

Chapter-5:• Processor OrganizationChapter-6:• Control Unit DesignChapter-7:• Memory OrganizationChapter-8:• Input/Output Organization• Glossary• Appendices• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-108-3

Price Rs. : 285/-Reprint : 2012

WEBENGINEERING

By: Pankaj Sharma

CONTENTS :Chapter-1:• Web EngineeringChapter-2:• World Wide WebChapter-3:• Information ArchitectureChapter-4:• Creating Cohesive WebsitesChapter-5:• Web Security and Requirement EngineeringChapter-6:• HTML (Hypertext Markup Language)Chapter-7:• Cascaded Style SheetChapter-8:• CGI, PERL

Chapter-9:• Java ScriptChapter-10:• PHP (Hypertext Preprocessor) AJAX

(Asynchronous Javascript and XML) andASP.NET

Chapter-11:• ASP (Active Server Page)Chapter-12:• XML (Extensible Markup Language)Chapter-13:• E-Commerce• Appendix• Model Question Papers• Index

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-80027-97-5

Price Rs. : 230/-Second Edition : 2011-12

WEBADMINISTRATION

By: Pankaj Sharma

CONTENTS :Chapter-1:• Introduction to Internet

(World Wide Web)Chapter-2:• HTML (Hypertext Markup Language)Chapter-3:• Separating Style from structure with Style

SheetChapter-4:• XML (Extensible Markup Language)Chapter-5:• Client Side Programming (Java Script)Chapter-6:• Server Side Programming

Chapter-7:• JSP (Java Server Pages)Chapter-8:• ASP (Active Server Page)Chapter-9:• Introduction to Microsoft.Net

Technology and WAP (WirelessApplication Protocol)

Chapter-10:• PHP (Hypertext Preprocessor), AJAX

(Asynchronous Javascript and XML)and ASP.NET)

• Appendices• Glossary• Index

COMPUTERS

S.K. KATARIA & SONS124

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-93-5014-071-0

Price Rs. : 215/-Reprint : 2013

INFORMATIONSECURITY AND

CYBER LAWS

By: Pankaj Sharma

CONTENTS :• Introduction to Information System• Information System Threats and Attacks• Introduction to E-Commerce• Introduction to Information Security and

Biometrics• Model of Cryptographic Systems• Network Security• Security Metrics-Classification and Their

Benefits• Appendices• Index

Size : 20 x 30/8Pages : 415 Approx.ISBN : 978-93-5014-075-8

Price Rs. : 240/-Second Edition : 2011

SYSTEMPROGRAMMING

AND SYSTEMADMINISTRATION

By: Pankaj Sharma

CONTENTS :Chapter-1:• Evolution of Components System

ProgrammingChapter-2:• Compiler and Compilation ProcessChapter-3:• Macro Language and Macro ProcessorChapter-4:• Theoretical Concepts of UNIX

Operating SystemChapter-5:• Getting Started with UNIX

Chapter-6:• Text ManipulationChapter-7:• Shell ProgrammingChapter-8:• System AdministrationChapter-9:• Shell Prompt and Command Library• Appendices• Index

By: Pankaj Sharma

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-027-7

Price Rs. : 195/-Second Edition : 2012

EXPERTSYSTEMS

CONTENTS :• Introduction• Domain Exploration and Knowledge

Elication• Learning Planning and Explanation in Expert

System• Introduction to Implementation Tools:

Prolog and Lisp• Natural Language Processing and

Understanding in Expert Systems• Search Algorithms in Expert Systems• Knowledge Representation and Reasoning• Glossary• Model Previous Paper & Previous Year

Question Papers• Index

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-113-7

Price Rs. : 225/-First Edition : 2011

SYSTEMPROGRAMMING

CONTENTS :Chapter-1:• EditorsChapter-2:• AssemblerChapter-3:• CompilersChapter-4:• Code Generation, Optimization, Lexx

and YaccChapter-5:• DebuggersChapter-6:• Operating System Part-1 (Booting

By: Pankaj Sharma

Techniques and Subroutines, Design ofKernel and Various Management of OS)

Chapter-7:• Theoretical Concept of UNIX

Operating SystemChapter-8:• Shell ProgrammingChapter-9:• Getting Started with UNIXChapter-10:• Macro Language and Microprocessor• Glossary• Appendices• Index

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-93-5014-201-6

Price Rs. : 165/-Second Edition : 2012

INFORMATIONSTORAGE &

MANAGEMENT

By: Pankaj Sharma

COMPUTERS

S.K. KATARIA & SONS 125

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-078-9

Price Rs. : 265/-Second Edition : 2011

RAPIDAPPLICATION

DEVELOPMENTUSING VISUAL

BASIC ANDVISUAL C++

By: Pankaj Sharma

CONTENTS :Chapter-1:• Introduction to Windows ProgrammingChapter-2:• Parts of Visual C++ ProgramChapter-3:• Event Oriented Windown Programming and

Device ContextChapter-4:• Working with Keyboard and MouseChapter-5:• Controls and DialogsChapter-6:• Serialisation and File HandlingChapter-7:• Win32 Static DLLChapter-8:• Database Connectivity• Appendix • Index

PARALLELALGORITHMS

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-290-5

Price Rs. : 165/-Second Edition : 2012

CONTENTS :• Introduction to Parallel Algorithm• Parallel Computational Models• Performance Measures of Parallel

Algorithms• Parallel Sorting Network• Parallel Searching Algorithms• Root Findings of Linear and Non-Linear

Equations• Graph Searching Algorithm• Combinatorial Algorithm for Permutation,

Combinations and Derangements• Appendices• Index

By: Pankaj Sharma

PATTERNRECOGNITION

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-145-8

Price Rs. : 210/-Second Edition : 2012

CONTENTS :• Introduction to Pattern Recognition• Mathematical Foundation• Statistical Pattern Recognition• Parameter Estimation Methods• Nonparametric Techniques• Unsupervised Learning and Clustering• Matlab Manual• Glossary• Model Questions• Previous Year Question Paper• IndexBy: Pankaj Sharma

MANET ANDHIGH SPEEDNETWORKS

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-233-2

Price Rs. : 165/-First Edition : 2012

By: Pankaj Sharma

CONTENTS :• AD-HOC Wireless Networks• AD-HOC Wireless Media Access

Protocols• Overview of AD-HOC Routing

Protocols• Communication Performance of

AD HOC Networks• Energy Conservation and Power

Life Issues• High Speed Networks Frame Relays• Asynchronous Transfer Mode (ATM)• Fast Ethernet and Fiber Channel

Wireless Lans

• Simulation Software (NS2.34 andBonmotion 1.4)

• Simulation• Appendix• Index

By: Pankaj Sharma

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-078-9

Price Rs. : 265/-Second Edition : 2011

WEBDEVELOPMENT

CONTENTS :• Introduction to JAVA• Class, Object and Methods in JAVA• Arrays, Inheritance and Polymorphism• Threads, Packages and Interfaces• Exceptions Handling, IO Applets, Generic and

Collections• Introduction to Internet (World Wide Web)• HTML (Hypertext Markup Languages)• Separating Style From Structure with Style Sheet• XML (Extensible Markup Language)• Client Side Programming (Javascript)• Introduction to Server Side Technologies:

CGI an PERL• Introduction to Server Side Technologies:

ASP (Active Server Page)• Introduction to Server Side Technologies:

JSP (JAVA Server Pages)• Appendices• Glossary• Index

COMPUTERS

S.K. KATARIA & SONS126

CONTENTS :• Internet• Introduction to JAVA• Beginning with JAVA Programs• Basic JAVA Programms• Methods and Classes• Inheritance, Packages & Interfaces• Advance Programming Concept• HTML and JAVA Applet• JAVA Library• JAVA AWT• Event Handling• JAVA Swing• JAVA Beans

INTERNET&

JAVA

By: Lalit Arora

• Servlet• JAVA Server Pages (JSP)• JDBC• Appendices• Bibliography• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-80027-29-6

Price Rs. : 250/-Second Edition : 2010-11

CONTENTS :Part-I: Object-Oriented Modeling &Design• Introduction• Object Modeling Technique (OMT)• Object Modeling• Advance Concepts of Object Modeling• Dynamic Modeling• Functional Modeling• OMT MethodologyPart-II: Programming in C++• Introduction of C++• Basic Programming Concepts

• Object Oriented ProgrammingConcepts

• Inheritance• Polymorphism• Files• Templates and Exceptions Handling• Appendices• Previous Years Question Papers• References• Index

OBJECTORIENTEDSYSTEMS

WITH C++

By: Lalit Arora

Size : 20 x 30/8Pages : 425 Approx.ISBN : 81-89757-31-8

Price Rs. : 225/-Reprint : 2012

CONTENTS :Part-I: Object-OrientedModeling & Design• Introduction• Object Modeling Technique (OMT)• Object Modeling• Advance Concepts of Object Modeling• Dynamic Modeling• Functional Modeling• OMT MethodologyPart-II: JAVA Programming• Introduction to JAVA• Beginning with JAVA Programs• Basic JAVA Programs• Methods and Classes

OBJECTORIENTED

SYSTEM WITHJAVA

By: Lalit Arora

• Inheritance, Packages & Interfaces• Advance Programming Concepts• HTML and JAVA Applet• JAVA Library• Event Mandling• JAVA AWT• Event Handling• Software Development using Java• JDBC• Internet• Appendices• Bibliography• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-81-89757-57-1

Price Rs. : 285/-Reprint : 2012

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-5014-143-4

81-89757-28-8

Price Rs. : 245/-Reprint : 2012

.NETFRAMEWORK

WITH C#PROGRAMMING

By: Lalit AroraAnkit Gupta

CONTENTS :Unit-I: The .Net Framework• Microsoft .Net Technology• .Net FrameworkUnit-II: C-Sharp Language (C#)• Programming in C#• Arrays, Strings and more• Object Oriented Programming• Additional ConceptsUnit-III: C-# Using Libraries• System NamespacesUnit-IV: Advance Features• ASP.Net

• Web Form and Control• Ado.Net• Advanced ApplicationsUnit-V: Advance Features• Assemblies• Generics• Attributes• Appendices• Index

COMPUTERS

S.K. KATARIA & SONS 127

CONTENTS :• Introduction• Modeling• UML• Basic Structural Modeling• Basic Behavioural Modeling• Architectural Modeling• OMT Methodology• Introduction to Java• Beginning with Java Programs• Methods and Classes• Inheritance, Packages and Interfaces• Advance Programming Concept

Size : 20 x 30/8Pages : 275 Approx.ISBN : 978-93-5014-069-7

Price Rs. : 265/-Reprint : 2012

OBJECTORIENTED

TECHNIQUESWITH JAVA

By: Lalit Kishore AroraRaj Kumar Bhatia

• HTML and JAVA Applet• Java Library• Java AWT• Event Handling• Software Development Using Java• JDBC• Bibliography• Appendices• Model Question Papers• Previous Year Question Paper• Index

CONTENTS :Part-I: The .Net Basics• Introduction to .Net• Visual Studio .NetPart-II: C# Basics• Introduction to C#• Programming in C#• Methods and Variables• Object Oriented Programming• Additional ConceptsPart-III: ASP .Net• Overview of ASP .Net• Developing Web Applications

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-80027-32-6

Price Rs. : 250/-Reprint : 2012

C# USING.NET

FRAMEWORK

By: Lalit AroraAnjali Arora

• Standard Controls• Validation and Login ControlsPart-IV: Visual C#(Windows Applications)• Windows Applications• Common ControlsPart-V: ADO .Net (Data Base Handling)• ADO .NetPart-VI: Advance Features• Advance Features• Experiments• Index

(For RGTU)

CONTENTS :• Introduction to C++• Object Oriented Concept• Classes and Data Abstraction• Operator Overloading• Inheritance• Polymorphism• Files and Input/Output Streams• Templates and Exception Handling• C++ Programming Lab• Appendices• Index

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-029-1

Price Rs. : 235/-Second Edition : 2011

OBJECTORIENTED

PROGRAMMINGUSING C++

By: Lalit Kishore AroraDr. Vikesh Kumar

CONTENTS :• Introduction• Beginning with Java Programs• Basic Java Programs• Methods and Classes• Inheritance, Packages and Interfaces• Advance Programming Concept• I/O Programming and Networking• Java AWT• Event Handling• Advanced Concepts of Java• Website Designing

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-136-6

Price Rs. : 195/-Second Edition : 2011

JAVAPROGRAMMINGAND WEBSITE

DESIGN

By: Lalit Arora

• Appendices• Previous Years Question Papers• Index

COMPUTERS

S.K. KATARIA & SONS128

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-167-0

Price Rs. : 260/-Reprint : 2012

INTRODUCTION TOCOMPUTERGRAPHICS

By: Udit Agarwal

CONTENTS :• Introduction to Computer Graphics• Graphics Primitives• Introduction to Images• Scan Conversion• Polygons• 2D Transformation• Windows and Clipping• 3D Transformation• Three Dimensional Projections• Hidden Lines and Surfaces• Introduction to Curve Generation• Rendering and Illumination• Index

CONTENTS :• Introduction to Computer Graphics• Graphics Primitives• Images• Mathematics for Computer Graphics• Scan Conversion• Polygons• Segments• 2-D Transformation• Windows and Clipping• 3-D Transformation• Three Dimensional Projections• Interaction

Size : 20 x 30/8Pages : 430 Approx.ISBN : 978-93-80027-70-8

Price Rs. : 265/-Reprint : 2013

COMPUTERGRAPHICS

By: Udit Agarwal

• Hidden Lines and Surfaces• Introduction to Curve Generation,• Rendering and Illumination• Colour Models• Animation• Graphical Kernal System (GKS)• Lab Programs• Previous Years Questions Papers• Index

CONTENTS :• Introduction to Data Structures• Essentials of C Language• Introduction to Arrays and Matrices• Linked List• Stacks• The Queues• Recursion• Trees• Binary Search Tree• AVL Tree• B-Tree and Its Variants• Graphs• Sorting Techniques• Searching and Hashing Techniques• Storage Management• Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-056-7

Price Rs. : 275/-Third Edition : 2012

DATASTRUCTURES

USING C

By: Udit Agarwal

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-236-3

Price Rs. : 265Reprint : 2013

SOFTWAREENGINEERING

By: Udit Agarwal

CONTENTS :• Software and Software Engineering• Software Development Life Cycle Models• Software Requirement Specification• Software Reliability and Quality Assurance• Software Project Management• Software Design• Software Measurement and Metrics• Coding and Testing• Software Maintenance• Software Re-Engineering and

Reverse Engineering• Computer Aided Software Engineering• Software Reuse• Important Questions with Answers• Glossary• Previous Years Question Papers• Bibliography• Index

(with CD)

COMPUTERS

S.K. KATARIA & SONS 129

CONTENTS :• Characterization of Distributed Systems• System Models• Theoretical Foundation for Distributed

System• Distributed Mutual Exclusion• Distributed Scheduling• Deadlock Detection in Distributed

Systems• Agreement Protocols• Interprocess Communication• Distributed Objects and Remote

Invocation

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-349-0

Price Rs. : 210/-Reprint : 2013

DISTRIBUTEDSYSTEMS

By: Udit Agarwal

• Security in Distributed Systems• Distributed File Systems• Distributed Shared Memory• Failure Recovery in Distributed System• Fault Tolerance in Distributed Systems• Transactions and Concurrency Control• Distributed Transactions• Replication• Important Questions with Answers• Previous Years Question Papers• Index

CONTENTS :• Dynamic Memory Management• Introduction to Data Structures• Introduction to Arrays and Matrices• Linked List• Stacks• The QueuesPart-B:• Recursion• Trees• Binary Search Tree• AVL Tree

Size : 20 x 30/8Pages : 280 Approx.ISBN : 978-93-5014-389-6

Price Rs. : 175/-First Edition : 2013

DISTRIBUTEDCOMPUTING

By: Udit Agarwal

• B-Tree and Its Variants• Graphs• Sorting Techniques• Searching and Hashing Techniques• Index

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 225/-First Edition : 2013

DATA MININGAND DATA

WAREHOUSING

By: Udit Agarwal

Size : 20 x 30/8Pages : 525 Approx.ISBN : 978-93-5014-286-8

Price Rs. : 265/-Third Edition : 2012

DATASTRUCTURES

By: Udit Agarwal

CONTENTS :Unit-I:• Characterization of Distributed Systems• System Models• Theoretical Foundation for Distributed

SystemUnit-II:• Distributed Mutual Exclusion• Deadlock Detection in Distributed

Systems• Agreement ProtocolsUnit-III:• Interprocess Communication• Distributed Objects and Remote

Invocation

• Distributed File SystemsUnit-IV:• Transactions and Concurrency Control• Distributed Transactions• ReplicationUnit-V:• Introduction to Grid Computing• Introduction to Cloud Computing• Important Questions with Answers• Model Test Papers• Bibliography• Index

COMPUTERS

S.K. KATARIA & SONS130

CONTENTS :• Introduction• Multimedia and the Internet• Multimedia Building Blocks• Data Compression• Speech Compression, Synthesis and

Images• Communication Protocols• Video Compression• Model Question Papers• References• Notes• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-81-89757-48-9

Price Rs. : 210/-Second Edition : 2012

MULTIMEDIA(SYSTEM, TECHNOLOGY

& COMMUNICATION)

By: Sujata PandeyManoj Pandey

CONCEPTS OFDATA

STRUCTUREUSING C

By: R.R.K. Tripathi

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-82-1

Price Rs. : 165/-First Edition : 2009

CONTENTS :• Overview of Operating Systems• Operating System Structure• Process Management• CPU Scheduling• Process Synchronization and

Interprocess Communication• Deadlocks• Memory Management• Virtual Memory• I/O Management and Disk Scheduling• File System Management

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-81-89757-59-5

Price Rs. : 230/-Reprint : 2012

OPERATINGSYSTEMS

By: Vijay Shukla

CONTENTS :• Data Structure• Understanding Complexity• Array• Stack• Queue• Recursion• Linked List• Tree• Searching• Hashing• Bst and Avl Tree• Multiway Search Tree

• Protection and Security• Case Studies: Linux and Windows NT• Introduction to Distributed Systems• Distributed File System• Previous Years Examination Papers• Index

• Sorting• Graph• File Organization• Selected Programmes• Objective Type Questions• Examination Paper• Index

CONTENTS :Unit-1:• Need of Data Warehouse• Data Warehousing Building Blocks• Dimensional AnalysisUnit-II:• Principles of Dimensional ModelingUnit-III:• Dimensional ModelingUnit-IV:• Data Mining• Data Mining Techniques• Data Mining Models and Applications

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-11-1

Price Rs. : 230/-Reprint : 2013

DATA MININGAND DATA

WAREHOUSING

By: Dr. Sachin KumarKadambri Agarwal

• Multimedia Data Mining• Few Important Difference• Testing Data Warehouse• Appendices• Questions with Answers• Glossary• Examination Papers• Index

COMPUTERS

S.K. KATARIA & SONS 131

PROGRAMMINGLANGUAGES

By: Dr. Sachin KumarKadambri Agarwal

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-37-1

Price Rs. : 225/-Reprint : 2012

CONTENTS :Section-A: Introduction• Introduction to Programming Languages• Programming Language Processors• Elementary Data TypeSection-B: Structured Data Objects,Subprograms and Programmer DefinedData Type• Structured Data Types• Subprograms and Programmer Defined

Data TypesSection-C: Sequence Control and DataControl• Sequence Control

• Data ControlSection-D: Storage Management andProgramming Languages• Storage Management• Programming Languages• Operating and Programming

Environment for Programming Language• Comparison in Various Languages• Appendices• Solved Examination Papers• Index

Size : 20 x 30/8Pages : 400 Approx.ISBN : 978-93-5014-190-8

Price Rs. : 265/-Reprint : 2012

NETWORKTECHNOLOGY

By: Dr. Sachin KumarKadambri Agarwal

By: Dr. Sachin KumarKadambri Agarwal

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-205-9

Price Rs. : 250/-First Edition : 2011

SYSTEMS &NETWORK

ADMINISTRATION

CONTENTS :Unit-I:• Network Technology• Internet Searching ToolsUnit-II:• SLIP (Serial Line Internet Protocol)/PPP

(Point to Point Protocol)• Transport Layer Issues• Network SecurityUnit-III:• Review of LAN• Serial Communication• Inter Networking and Routing

Unit-IV:• Usart• ISDN (Integrated Service Digital

Network)• Flow Control Error Correction and

Detection• Inter Networking and Serial

Communication• Appendix• Multiple Choice Type Questions• Examination Paper• Index

CONTENTS :Unit-1:• An Introduction to

System Administration• Host Management• SuperuserUnit-II:• Network Administration• VLAN (Virtual Local Area Network)• Configuring ServerUnit-III:• Host and Network Security• Scripting Tools

Unit-IV:• Categories of Security• Appendices• Examination Papers (Solved)• Examination Papers (Unsolved)• Index

NETWORKPROGRAMMING

By: Dr. Sachin KumarKadambri Agarwal

CONTENTS :Unit-1:• Introduction to Networking• TCP/ IP Protocol Architecture• IP Datagram FormatUnit-II:• Socket Introduction• ECHO ServiceUnit-III:• Algorithms and Issues in Server Software

DesignUnit-IV:• Remote Procedure Call Concept• RPC Authentication

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-123-6

Price Rs. : 225/-First Edition : 2011

Unit-V:• NFS (Network File System)• Appendix• Previous Years Examination Papers• Index

COMPUTERS

S.K. KATARIA & SONS132

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-231-8

Price Rs. : 175/-Second Edition : 2013

NETWORKSECURITY

By: Neha Ghai

CONTENTS :• Network Security• Codes and Ciphers• Stream Ciphers• Block Ciphers• Public Key Cryptosystems• Kerberos• System Indentification and Clustering• Security: Hash Functions-Authentications• Telecommunication Network

Architecture• Previous Years Question Papers• Index

CONTENTS :• Number Representation• Register Transfer Language• Arithmetic Algorithms• Microoperations• Control Unit• Processor Organization• Memory Organization• Input-Output Organization• Appendices• Question Bank• Model Test Paper (Solved)• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-226-4

81-89757-15-6

Price Rs. : 215/-Reprint : 2013

COMPUTERORGANIZATION

By: Vivek Keshari

By: K. Patrai

CONTENTS :• Graphs• Euler and Hamiltonian Graphs• Tree• Cut Sets and Network Flow• Planar Graphs• Vector Spaces of a Graph• Matrix Representation of Graphs• Colouring of Graphs• Enumeration of Graphs• Directed Graphs• Previous Years Question Papers• Index

Size : 20 x 26/8Pages : 300 Approx.ISBN : 81-89757-41-5

Price Rs. : 175/-Reprint : 2013

GRAPH THEORY

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-330-8

Price Rs. : 175/-First Edition : 2012

MANAGEMENTINFORMATION

SYSTEM

By: Neha Ghai

CONTENTS :Section-A:• Introduction to Information Systems• Introduction to Management Information

Systems• Management Information System and the

System Approach• Manager Overview• Information Technology

Section-B:• Conceptual System Design

Section-C:• Detailed System Design

Section-D:• Implementation of Management

Information System• Evaluation, Control and Maintenance of

Management Information Systems• Pitfalls in Management Information System• Enterprise Resource Planning• Supply Chain Management• Customer Relationship Management• Procurement Management System• Previous Year Question Papers (Unsolved)• Previous Year Question Papers (Solved)• Index

COMPUTERS

S.K. KATARIA & SONS 133

Size : 20 x 30/8Pages : 320 Approx.ISBN : 978-93-5014-22-2

Price Rs. : 195/-First Edition : 2010

WEBTECHNOLOGY

By: Shubhra Garg

CONTENTS :• Getting Along with the Concept• Hypertext• Hypertext Markup Language• Client-Side Scripting• Server-Side Scripting• .Net Technologies• Appendices• Glossary• Index

CONTENTS :• Operating System Review• Distributed Operating System• Clock Synchronization and Distributed

Mutual Exclusion• Distributed File System and Scheduling• Distributed Shared Memory• Case Studies• Appendices• IndexSize : 20 x 30/8

Pages : 300 Approx.ISBN : 978-93-80027-41-8

Price Rs. : 175/-Reprint : 2012

FUNDAMENTALS OFDISTRIBUTEDOPERATING

SYSTEMS

By: Shubhra Garg

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-076-5

Price Rs. : 225/-Reprint : 2011

ADVANCEDMOBILE

COMPUTING

By: Vishnu Sharma

CONTENTS :Unit-I: Introduction to PersonalCommunication Services (PCS) andGlobal System for Mobile (GSM), GPRS• Introduction• Spread SpectrumUnit-II: Mobile Data Communicationsand Wireless Application Protocol (WAP)• Mobile Data CommunicationsUnit-III: Third Generation (3G) MobileServices and Wireless Local Loop (WLL)• Third Generation (3G)

Unit-IV: Global Mobile Satellite Systemsand Wireless enterprise Networks• Global Mobile Satellite Systems• Model Test Papers (Solved)• Previous Years Examination Papers

(Solved)• Index

Size : 20 x 26/8Pages : 380 Approx.ISBN : 978-81-89757-58-8

Price Rs. : 175/-Reprint : 2013

MOBILECOMPUTING

By: Vishnu SharmaS.P.S. Chauhan

CONTENTS :Unit-I:• Introduction• Spread Spectrum• Overview of Wireless LAN

Unit-II:• Data Replication for Mobile Computer• The CODA Distributed File System• Wireless Application Protocol

Unit-III:• Data Managements in Mobile

Computing

Unit-IV:• Data and Transaction Management

in a Mobile Environment

• Mobile Agent Computing

Unit-V:• Routing Protocols for Adhoc

Wireless Networks• Model Question Paper Based on

Previous Examination Paper• Examination Papers (Solved)• Examination Papers (Unsolved)• Index

COMPUTERS

S.K. KATARIA & SONS134

CONTENTS :• Information Technology• Infrastructure Management Overview• Preparing for Infrastructure Managment• Service Delivery Processes• Service Support Processes• Storage and Security Management• Information Technology Ethics• Emerging Trends in Information

Technology• Appendix-A: Important Abbreviations

Used in the Book

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-80027-40-1

Price Rs. : 265/-Reprint : 2012

ITINFRASTRUCTURE

MANAGEMENT

By: Anita Sengar

• Appendix-B: Common ITIL Terms• Examination Papers• Index

CONTENTS :• Electronic Mail• Network and Internet• World Wide Web• HTML• JAVASCRIPT• XML• Web Servers• Privacy and Network Security• Appendices• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-122-9

Price Rs. : 265/-Reprint : 2013

INTERNETFUNDAMENTALSAND CONCEPTS

By: Shubhra Garg

CONTENTS :• Introduction to Software Project

Management• Step wise Project Planning• Project Evaluation and Estimation• Activity Planning• Risk Management• Resource Allocation• Monitoring and Control• Managing Contracts and People• Software Quality• Study of any SPM Software-Project 2000

or Equivalent

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-340-7

Price Rs. : 195/-First Edition : 2012

SOFTWAREPROJECT

MANAGEMENT

By: Rishabh Anand

• Solved Examples on SPM• Appendices• Frequently Asked Questions• Viva-Voce Questions• Model Test Papers for Practice• Examination Paper• Index

By: Rishabh Anand

Size : 20 x 26/8Pages : 325 Approx.ISBN : 978-93-5014-307-0

Price Rs. : 195/-First Edition : 2012

WIRELESS ANDMOBILE

COMPUTING

CONTENTS :• Wireless Transmission• Telecommunication Networks• Wireless Lan• Mobile Network, Transport and

Application Layer• System Security• Question Bank• Model Question Papers for Practice• Examination Question Paper• Index

COMPUTERS

S.K. KATARIA & SONS 135

DATA MINING,DATA

WAREHOUSINGAND OLAP

CONTENTS :Unit-I:• Data Mining• Data Processing• Data ReductionUnit-II:• Data Mining Statistics• Association RulesUnit-III:• Classification• Decision Trees• Bayesian Classification• Artificial Neural Networks• Genetic Algorithm• ClusteringUnit-IV:• Introduction to Data Warehousing

Size : 20 x 30/8Pages : 375 Approx.ISBN : 978-81-89757-47-2

Price Rs. : 245/-Reprint : 2012

By: Gajendra Sharma

• Data Warehousing :Concepts and Mechanisms

• Building a Data Warehouse• Client Server Computing• Distributed and Parallel Processing• Mapping Data Warehouse to a

Multiprocessor Architecture• Aggregation• OLAP• Business Competitive Analysis• SecurityUnit-V: Advance Datamining• Web Mining• Visual Web Data Mining• Temporal and Spatial Data Mining• Appendices• References• Examination Paper • Index

CONTENTS :• Characterization of Distributed Systems• System Model• Theoretical Foundation for Distributed

System• Distributed Mutual Exclusion• Distributed Deadlock Detection• Agreement Protocol• Distributed Object and Remote

Invocation• Security in Distributed System• Distributed File System• Transactions and Concurrency Control

• Replication• Distributed Algorithm• Corba Case Study• Objective Type Questions• Previous Years Question Papers• Index

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-80027-28-9

Price Rs. : 185/-Reprint : 2012

DISTRIBUTEDSYSTEMS

By: Naveen Kumar Singh

Size : 20 x 26/8Pages : 325 Approx.ISBN : 81-88458-98-8

Price Rs. : 210/-Reprint : 2013

COMPILERDESIGN

CONTENTS :• Introduction to Compiler• Programming Language• Lexical Analysis• Grammar• Basic Parsing Techniques• Top-Down Parsing• LR Parsers• Syntax Directed Translation• Symbol Tables• Storage Management• Error Handling• Code Optimization

• Data Flow Analysis• Code Generation• Programs• University Papers• Index

By: Gajendra Sharma

CONTENTS :• Overview of Network Management• Management Information Base (MIB)• OSI, ARP and RARP• Delivery and Routing of IP Packets,

Internet-Working and Virtual PrivateNetworks

• ICMP, IGMP, TCP AND SMTP• Question Bank• Model Question Papers• References and Suggested Readings• Index

NETWORKMANAGEMENT

By: Rishabh Anand

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-93-5014-354-4

Price Rs. : 150/-Second Edition : 2012

COMPUTERS

S.K. KATARIA & SONS136

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-5014-094-9

Price Rs. : 185/-Third Edition : 2010-11

FUNDAMENTALS OFDISTRIBUTED

SYSTEMS

By: Naveen Kumar Singh

• Security in Distributed System• Transactions and Concurrency Control• Replication• Distributed Algorithm• Distributed Multimedia and Database

System• Corba Case Study• Model Question Papers• Index

CONTENTS :• Introduction to Distributed System• System Model• Theoretical Foundation for Distributed

System• Distributed Mutual Exclusion and

Distributed Shared Memory• Distributed Deadlock and Load

Scheduling• Agreement Protocol• Interprocess Communication and

Synchronization• Distributed File System

INTRODUCTION TOCRYPTOGRAPHYAND NETWORK

SECURITY

By: Sunil Gupta

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-81-906919-7-0

Price Rs. : 150/-Reprint : 2012

CONTENTS :Unit-I: Introduction to Cryptosystem• Introduction to Cryptosystem• Classical Encryption Technique• Modern Block Cipher Principle• Data Encryption StandardUnit-II: Introduction to Algorithms andPublic Key Cryptosystem• Group Ring and Fields• Algorithms and Remainder Theorem• Public Key CryptosystemUnit-III: Message Authentication and HashFunction• Message Authentication and Hash Function

• Digital SignatureUnit-IV: Authentication Applications• Authentication ApplicationsUnit-V: Introduction to Cryptography• IP Security• Web Security• System Security• Advanced Algorithm and Standards• Model Test Papers• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-017-8

Price Rs. : 195/-Reprint : 2012

MANAGEMENTINFORMATION

SYSTEM

By: P.C. Reddy

CONTENTS :Unit-1: Foundations of Information System• Introduction to Information in Business• Solving Business Problem with Information

System, Types and its Efficiency andEffectiveness

Unit-II: An Overview of ManagementInformation System and Conceptual• MIS Concept, Data Processing, IRM and

END-User Computing• Concept of Organizational Planning,

Control Process and ComputationalSupport for Planning

Unit-III: Business Applications inInformation Technology• Internet, E-Commerce and Intranet,

Extranet and Enterprise Solution

• Information System for Business Operationand Decision Support

Unit-IV: Managing Information Technologyand Advanced Concepts• Enterprise, Global Management,

Planning and Information System forStrategic Advantages

• Security and Ethical Challenges andAdvanced Concepts in Information System

• Mini Illustrative Projects and Suggestions• Index

CONTENTS :• Unit-1: Introduction to ERP• Conceptual Model of Enterprise

Information System• Evolution of Enterprise Resource

Planning System• Structure and Benefits of Enterprise

Resource PlanningUnit-II: ERP Tools• Business Processing Reengineering• Data Warehousing, Data Mining and

OLAP• Advanced Tools of ERP System

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-109-0

Price Rs. : 185/-Reprint : 2012

ENTERPRISERESOURCEPLANNING

(TEXT AND CASES)

By: Dr. P. C. ReddyK. Viswaksena Reddy

• Unit-III: ERP Markets• ERP Market Places and Dynamics• ERP Functional Modules• Integration of ERP SystemUnit-IV: ERP Implementation• ERP Implementation• Methodology of ERP DesignUnit-V: ERP and E-Commerce• ERP and E-Commerce• Integrating ERP and Success Factors• ERP Tools-A SAP HR Case Study• Index

COMPUTERS

S.K. KATARIA & SONS 137

CONTENTS :• Introduction to Computers• Input Output Devices• Computer Software• Business Systems• Disk Operating System• Windows Operating Systems• GW Basic• C Programming• C++ Programming• Information Retrieval-Fox Pro• Microsoft Word• Microsoft Excel

• Microsoft PowerPoint• Microsoft Access• Microprocessor• AutoCAD• Programming Techniques• Robotics• Index

Size : 20 x 30/8Pages : 550 Approx.ISBN : 81-85749-55-8

Price Rs. : 195/-Reprint : 2012

COMPUTERAWARENESS

By: S. Rai & R. Ghosh

SIMPLIFIED APPROACH TOMANAGEMENTINFORMATION

SYSTEM

By: Ravi Kumar

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-309-4

Price Rs. : 255/-First Edition : 2012

CONTENTS :• Management Information System• Information System• System Concepts• Database Management System• Need of the Information System for

Managers• Information System and Business• MIS Models Development Stages

• Evaluation of Management InformationSystem

• Ethical and Security Issues• Index

CONTENTS :Unit-I: Introduction• Data Compression: A Big Picture• Mathematical Preliminaries for Lossless

CompressionUnit-II: Huffman Coding• Introduction to Basic Terms

Compression• Adaptive Huffman Coding• Huffman Coding ConceptsUnit-III: Arithmetic Coding• Arithmetic Coding• Dictionary Techniques• Predictive Coding

Size : 20 x 26/8Pages : 260 Approx.

ISBN :

Price Rs. : 165/-First Edition : 2009

FUNDAMENTALS OFDATA

COMPRESSION

By: Shiva Sharma

Unit-IV: Mathematical Preliminaties forLossy Coding• Mathematical Preliminaries for Lossy

CompressionUnit-V: Vector Quantization• Vector Quantization and its

Implementation• Examination Papers• Index

CONTENTS :Unit-I:• Client/Server Computing: An Overview• Downsizing and Client/Server

ComputingUnit-II:• The Backbone of the Client/Server

ApplicationUnit-III:• The ConnectivityUnit-IV:• Developing Client/Server System

Size : 20 x 26/8Pages : 225 Approx.

ISBN : 81-89757-97-0

Price Rs. : 150/-Reprint : 2010

A GLIMPSE INTOCLIENT/SERVER

COMPUTING

By: Shiva Sharma

Unit-V:• Client/Server System Development-

Training and Support• Client/Server System-Database,

Database Tools and Implementation ofSynchronization

• Appendix: Case Studies• Model Test Papers• Solved Examination Paper• Previous Years Examination Papers• Index

COMPUTERS

S.K. KATARIA & SONS138

CONTENTS :• Introduction to System and Models• System Study• System Simulation• Continuous System Simulation• Discrete System Simulation• System Dynamics• Simulation of PERT Network• Simulation Language• Process and Validation of Modeling and

SimulationSize : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-80027-22-7

Price Rs. : 165/-Reprint : 2011

MODELING ANDSIMULATION

By: Pushpa SinghNarendra Singh

• Appendix• Model Test Papers• Examination Papers• Index

CONTENTS :• Introduction• Growth of Functions• Recurrences• Divide and Conquer• Medians and Order Statistics• Data Structure for Disjoint Sets• Dynamic Programming• Greedy Algorithms• Graphs• String Matching

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-118-2

Price Rs. : 230/-Reprint : 2013

ALGORITHMANALYSIS

AND DESIGN

By: Deepak Gupta

• NP Complete• Appendix• Model Test Papers• Examination Papers• Index

CONTENTS :• Introduction to Data Structure• Recursion• Arrays• Structures• Pointers• Linked List• Sparse Matrix• Stacks• Queues• Trees• Graphs• Sorting

Size : 20 x 30/8Pages : 650 Approx.ISBN : 978-93-5014-081-9

Price Rs. : 325/-Reprint : 2013

A COURSE INDATA

STRUCTURESUSING C

By: Deepak Gupta

• Searching• Files• Appendices• Index

CONTENTS :Section-A: An Overview of C,Introduction, Stacks and Queues• Basics of C Programming• Functions• Structures• Introduction to Data Structures• Arrays• Searching and Sorting• Stacks• Queues

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-93-5014-182-3

Price Rs. : 265/-First Edition : 2011

DATASTRUCTURES

USING C

By: Deepak Gupta

Section-B: Pointers and Linked Lists• Pointers• Linked ListSection-C: Trees and Graphs• Trees• GraphsSection-D: File Handling and AdvancedData Structures• File Handling and Organization• Examination Paper• Index

COMPUTERS

S.K. KATARIA & SONS 139

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-80027-07-4

Price Rs. : 250/-Reprint : 2013

INTRODUCTION TOPROGRAMMING

By: Deepak Gupta

CONTENTS :Unit-I: Introduction to Programming• Introduction to Computer and

Programming Languages• Data Representation• Overview of Algorithm, Flowcharts and

DFDUnit-II: Programming Using C• Overview of C Language• C Language Basics• Input-Output Operations in C• Operators and Expressions in C• Decision-Making and Branching

(Selection) in C

Unit-III: Iteration and Subprogramms• Loop Control Power in C• Functions in C• Arrays in CUnit-IV: Pointers and Strings• Strings in C• Structures and Union in C• Pointers in C• Appendices• Examination Papers (Solved)• Bibliography• Index

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-80027-95-1

Price Rs. : 265/-Third Edition : 2012

DATASTRUCTURES

By: Deepak Gupta

CONTENTS :Unit-I Fundamentals of AlgorithmsAnalysis with the Concept of Arrays andLinked List• Introduction to Data Structure• Arrays• Linked List• Sparse Matrix• Stacks• Queues

Unit-II: Trees and Graphs• Trees• GraphsUnit-III: Searching and Sorting• Sorting• SearchingUnit-IV: Files• Files• Previous Years Examination Papers• Index

COMPUTERNETWORKS

By: Deepak Gupta

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-227-1

Price Rs. : 185/-Reprint : 2013

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-93-5014-248-6

Price Rs. : 225/-First Edition : 2012

DATASTRUCTURESUSING C++

By: Er. Deepak Gupta

CONTENTS :• Data Structures and Complexity Analysis• Linear Lists• Stacks and Queues• Hashing• Trees• Graphs• Appendix• Index

CONTENTS :• Introduction to Computer Networks• Network Architecture• Data Communication and

Physical Layer• Data Link Layer• Mac Layer• Network Layer• Network Security and Application

Layer Protocols• End Term Examinations• Index

COMPUTERS

S.K. KATARIA & SONS140

By: Ashutosh Kumar DubeySize : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-085-7

Price Rs. : 295/-Second Edition : 2011

DATABASEMANAGEMENT

CONCEPTS

CONTENTS :• Introducing Database

Management System• Database Architecture• File Organization Techniques• Data Models : Object Based

Logical Model• Enhanced E-R Diagram (EER)• Other Data Models• Relational Data Models• Relational Algebra• Structured Query Language (SQL)• Advance SQL• QBE and QUEL• Normalization Fundamental

• Normalization• Database Security and Integrity

Constraints• Query Processing and Optimization• Transaction Processing Concepts• Concurrency Control Techniques• Distributed Databases• Emerging Database Technologies• Study of RDBMS Through Oracle• An Introduction to PL/SQL• Appendix A : Embedded and

Dynamic SQL• Appendix B : Postgre SQL• Appendix C : MySQL• Index

Size : 20 x 30/8Pages : 275 Approx.

Price Rs. : 165/-First Edition : 2009 By: J.S. Dilawari

CONTENTS :• Introduction to Computer Graphics• Clipping• 3D Computer Graphics• Projection• Advanced Issues• Curves and Surfaces• Display Devices• Input Devices-Hardware for Computer

Graphics• Transformations, Projections, Matrices

for Computer Graphics

• Programs for Computer Graphics• Glossary• Examination Papers• Index

COMPUTERGRAPHICS

CONTENTS :• Overview of Biological Neurons• Fundamental Concepts of Artificial

Neural Networks• Single Layer Perception Classifier• Multi-Layer Feed Forward Networks• Single Layer Feedback Network• Associative Memories• Self Organizing Networks• Hybrid Expert Systems• Basics of Fuzzy Logic• Question Bank

INTRODUCTION TOARTIFICIAL

NEURALNETWORKS

By: Gunjan Goswami

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-296-7

Price Rs. : 225/-Third Edition : 2012

• Model Test Papers• Previous Years Solved Examination

Papers• Index

CONTENTS :Unit-I:• Introduction to Artificial Intelligence• Problems, Problem Spaces and Search• Heuristic Search Techniques• Game PlayingUnit-II:• Knowledge Representation• Using Predicate KnowledgeUnit-III:• Reasoning Under Uncertainty• Fuzzy LogicUnit-IV:• Planning• Learning• Overview of Biological Neurons

INTRODUCTION TOARTIFICIAL

INTELLIGENCE

By: Gunjan GoswamiSize : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-124-3

Price Rs. : 245/-Reprint : 2013

• Fundamental Concepts of ArtificialNeural Networks

• Genetic AlgorithmUnit-V:• Natural Language Processing• Rule Based Expert Systems• Robotics• Lisp and Prolog• Question Bank• Question with Answers• Model Question Papers• Examination Paper• Index

COMPUTERS

S.K. KATARIA & SONS 141

Size : 20 x 30/8Pages : 265 Approx.ISBN : 978-93-5014-353-7

Price Rs. : 195/-First Edition : 2012

DATA MININGAND DATA

WAREHOUSING

By: Gunjan Goswami

CONTENTS :• Introduction to Data Warehousing• Data Warehouse: Features and

Architecture• Dimensional Modeling• Olap Strategies for Large Data

Warehouse Projects• Data Warehouse Implementation• Introduction to Data Mining• Data Mining Query Language• Classification• Association Rules• Clustering

• Mining Complex Types of Data• Question Bank• Test Yourself• Model Test Papers• Examination Papers• Index

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. :First Edition : 2013

ADVANCECOMPUTER

ARCHITECTURE

By: Gunjan Goswami

CONTENTS :• Introduction to E-Commerce• E-Commerce Framework• Architectural Framework of

E-Commerce• Security Issue of E-Commerce• Electronic Payment Systems• Electronic Commerce Application• Implementation of E-Commerce• E-Commerce Issues and Tools• E-Governance• Practicals

Size : 20 x 30/8Pages : 200 Approx.ISBN : 81-89757-51-2

Price Rs. : 115/-Reprint : 2011

E-COMMERCEAND

APPLICATIONS

By: Pandey and Pandey

• Appendix-I• Appendix-II• Model Question Papers• Index

CONTENTS :• Introduction to JAVA• Fundamental and Control Structure• Class and Memory Management• Interfaces and Packages• The I/O Package and Stream Classes• Exception Handling• Threads and Multi-Threading• Applet• Java Data Base Connectivity (JDBC)• Appendix : Practicals• Model Question Papers• Index

Size : 20 x 30/8Pages : 200 Approx.ISBN : 81-89757-64-4

Price Rs. : 140/-Second Edition : 2009

INTERNETPROGRAMMING

USING JAVA

By: Pandey and Pandey

COMPUTERS

S.K. KATARIA & SONS142

CONTENTS :• Internet Basics• World Wide Web• HTML/DHTML• Web Designing Technology• Introduction to JavaScript (Building of

JavaScript Syntax)• The JavaScript Document Object Model• Forms Used by a Web Site• Developing Interactive Web Pages Using

JavaScripts and ASP• Web Site Designing Using Graphic

Package

• Front Page• Appendix 1: Java Server Pages• Appendix 2: Practicals• Model Question Papers• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 81-89757-65-2

Price Rs. : 115/-First Edition : 2007

WEBDESIGNING

By: Pandey and Pandey

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-096-3

Price Rs. : 250/-Reprint : 2013

ADVANCEJAVA

By: Kanika Lakhani

CONTENTS :• Introduction to JAVA• Inheritance and Interfaces• Packages and Exception Handling• Multithreading in JAVA• Input/Output in JAVA• AWT and Applets in JAVA• Networking• Database Networking• Distributed Objects• Swings• Abstract Window Toolkit (AWT)• JAVA Beans Components

• Security• Appendix• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-319-3

Price Rs. : 195/-First Edition : 2012

DATA MININGAND DATA

WAREHOUSING

By: Kanika LakhaniGaurav Girdhar

CONTENTS :• Data Mining• Data Preprocessing, Language and

Concept Description• Associative Mining Rule• Classification and Prediction• Cluster Analysis• Introduction to Data Warehousing• Data Warehousing and OLAP• Client-Server Computing• Web Mining• Security in DWH and Data Mining• Appendix• Index

(UTU)

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. : 195/-First Edition : 2013

ADVANCEJAVA

PROGRAMMING

By: Kanika Lakhani

COMPUTERS

S.K. KATARIA & SONS 143

COMPUTERNETWORKS

By: J.S. Rana

CONTENTS :• Basic of Computer Networks• Network Classification and Component• Communication Routing and Protocols• Local Area Network• Switching and Routing in Networks• Open Systems Interconnection (OSI)• TCP/IP• Data Link Layer• Network Layer• Wireless Transmission• Asynchronous Transfer Mode• Ethernet

• Network Security and Privacy• Integrated Services Digital Network• Client/Server Computing• Appendices• Index

CONTENTS :• Network Basics• OSI Model• Introduction to TCP/IP• Protocol Suites• Network Architecture• Network Connectivity• Network Printing• Network Administration Security• Network Troubleshooting Techniques• Error Detection• Wireless Networking• Question Bank• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-80027-14-2

Price Rs. : 120/-First Edition : 2009-10

COMPUTERNETWORKS

By: D.S. SherawatSanjay Sharma

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-80027-33-3

Price Rs. : 165/-First Edition : 2009

CONTENTS :• Introduction to Multimedia• Multimedia Hardware• Multimedia Files• Introduction to Photoshop• Additional Effects of Photoshop• Working with Photoshop• Introduction to Flash• Animating in Flash• Introduction to Director• Question Bank• SBTE Previous Years Question Papers• Index

Size : 20 x 30/8Pages : 300 Approx.ISBN : 81-88458-91-0

Price Rs. : 150/-Reprint : 2012

MULTIMEDIAAND

APPLICATIONS

By: D.S. SherawatSanjay Sharma

DATACOMPRESSION

By: Amrita Jyoti

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-175-5

Price Rs. : 155/-Second Edition : 2012

CONTENTS :• Introduction• Mathematical Preliminaries for Lossless

Compression• Huffman Coding• Arithmetic Coding• Dictionary Techniques• Context Based Compression• Lossless Image Compression• Mathematical Preliminaries for Lossy

Coding• Scalar Quantization• Vector Quantization

• Speech and Video Compression• Glossary• Model Question Papers• Previous Years Question Papers• Index

COMPUTERS

S.K. KATARIA & SONS144

CONTENTS :• Introduction to Visual Programming• Introduction to Visual Basic• Visual Basic Structure• Designing the User Interface• Menus and Command Dialog Control• Display Date/Time and Print• Database Programming• Working with ActiveX,• Projects in Visual Basic• Question Bank• Model Test Papers• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 81-89757-10-5

Price Rs. : 120/-Second Edition : 2011

VISUALPROGRAMMING(USING VISUAL BASIC)

By: D.S. SherawatSanjay Sharma

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-090-1

Price Rs. : 150/-First Edition : 2010

COMPUTERORGANIZATION

WITHARCHITECTURE

By: Sweety GoyalDinesh Sindwani

CONTENTS :• Introduction to Computer Organization• System, Expansion Bus Standards and

Architectures• Processor• Input Output Organization• Memory Organization• Multiprocessor System• Hardware Organisation of PC• Interface Standards• Question Bank• Appendices

• Model Test Papers• Examination Papers• Index

UNIX AND SHELLPROGRAMMING

By: Devendra Kumar

CONTENTS :Chapter-1:• An Introduction to UNIXChapter-2:• UNIX File SystemChapter-3:• Editors (vi and ed)Chapter-4:• General Purpose UtilitiesChapter-5:• UNIX Shell ProgrammingChapter-6:• UNIX System Administration

Chapter-7:• UNIX Filters and ExpressionsChapter-8:• UNIX Tools• Additional Programs (Scripts)• Model Question Papers• Index

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-102-1

Price Rs. : 175/-Second Edition : 2011

OPERATINGSYSTEMS

By: D.S. SherawatSanjay Sharma

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-80027-71-5

Price Rs. : 150/-First Edition : 2009-2010

CONTENTS :• Introduction to System Software• Overview of Operating System• Functions of Operating Systems• Memory Management Functions• I/O Management Functions• File Management Functions• Disk Operation System (DOS)• Windows Operating System• UNIX Operating System• Linux Operating System• Question Bank• List of Practicals• Index

COMPUTERS

S.K. KATARIA & SONS 145

CONTENTS :Unit-I: Introduction to Cryptography• Network Security• Cryptosystem• Mobility in Network• Network Security IssuesUnit-II: Crypto Analysis• Introduction to Crypto• Crypto AnalysisUnit-III: Message Authentication andHash Function• Information System• Security User• Public Key CryptographyUnit-IV: Authentication AlgorithmApplication• Digital Signature Algorithm• Authentication Key Protocol• Signature ScnemesUnit-V: Web and System Security• Web Security• System Security• Topology

Size : 20 x 26/8Pages : 345 Approx.ISBN :

Price Rs. : 175/-First Edition : 2009

NETWORKSECURITY AND

CRYPTOGRAPHY

By: Dr. Umesh SehgalKuljeet Kaur

• Protocol Suite• Trust Models• Firewalls• Firewalls AttacksUnit-VI: Security and Theorem• Theorem and Algorithm• Socket Layer• Session Layer• Security at the Application Layer• Entity Autnentication• Symmetric Key Ciphers• Mathematics of Cryptography• Data Encryption Standard• Modern Ciphers• Using Algorithms• Public Key Algorithm• Special Algorithm for Protocols• Appendix: Tutorial• Question Bank• Index

By: Gurpreet KaurArchana Yadav

SOFTWARETESTING

(CONCEPTS AND TECHNIQUES)

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-93-5014-130-4

Price Rs. : 165/-Second Edition : 2012

CONTENTS :• Introduction to Software Testing• Testing and Quality Measurement• White Box Testing• Black Box Testing• Integration Testing• System and Acceptance Testing• Test Selection and Minimization for

Regression Testing• Test Planning and Management• Test Automation• Appendices

• Subjective Questions with Answers• Objective Type Questions• Model Test Papers• Index

Size : 20 x 30/8Pages : 362 Approx.ISBN : 978-93-5014-106-9

Price Rs. : 225/-First Edition : 2011

OPERATINGSYSTEMS

By: Umesh Sehgal

CONTENTS :Unit-I: Overview• Introduction• System StructureUnit-II: Process Management• Process Concept• Multithreaded Programming• Process SchedulingUnit-III: Process Coordinator• Synchronization• DeadlockUnit-IV: Memory Management• Memory Management Strategies• Virtual Memory AllocationUnit-V: Storage Management• File System• Implementing File System• Secondary Storage Structure• Input and Output System

Unit-VI: Protection and Security• System Protection• System Security• FirewallsUnit-VII: Distributed Operating System• Distributed Operating System• Distributed File System• Distributed SynchronizationUnit-VIII: Special Purpose System• Real Time System• Multimedia System• Appendices• Index

COMPUTERS

S.K. KATARIA & SONS146

DESIGN ANDANALYSIS OFALGORITHMS

By: Vinod K. Rajput

CONTENTS :• Introduction• Growth of Functions• Recurrence• Sorting Algorithms• Divide and Conquer• Heapsort• Quicksort• Sorting in Linear Time• Median and Order Statistics• Hash Tables• Binary Search Tree• AVL Tree• Red Black Tree• Augmenting Data Structures• Dynamic Programming• Greedy Algorithms• Amortized Analysis• B-Tree And B+Tree• Binomial Heaps• Fibonacci Heaps• Data Structures for Disjoint Sets• Backtracking

• Branch and Bound• Elementary Graph Algorithms• Minimum Spanning Tree• Single Source Shortest Paths• All Pairs Shortest Paths• Minimum Flow• Sorting Networks• Matrix Operations• Polynomials and the FFT• Number Theoretic Algorithms• String Matching• NP-Completeness• Approximation Algorithms• Previous Years Question Papers• Bibliography• Index

By: Vinod K. Rajput

ANALYSIS ANDDESIGN OF

ALGORITHMS

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-247-9

Price Rs. : 250/-First Edition : 2012

• Question Bank• Previous Year Papers• Model Test Papers• Index

Size : 20 x 30/8Pages : 275 Approx.ISBN : 978-93-5014-114-4

Price Rs. : 175/-First Edition : 2011

MULTIMEDIA

By: Er. Rachit Garg

CONTENTS :• Multimedia Overview• Image• Audio• Video• Multimedia Communication and

Connections• Animation and 3D Graphics• Web Internet• Working with MS Paint• Working with Dreamweaver• Virtual Reality

CONTENTS :• Introduction• Elementary Data Structures• Sorting Algorithms• Searching Algorithms• Divide and Conquer• The Greedy Method• Dynamic Programming• Backtracking• Branch and Bound• NP-Hard and NP-Complete Problems• Index

Size : 20 x 30/8Pages : 650 Approx.ISBN : 978-93-5014-091-8

Price Rs. : 295/-Second Edition : 2011-12

COMPUTERS

S.K. KATARIA & SONS 147

By: Vikas ChaudharyKanika Garg

CRYPTOGRAPHYAND

NETWORKSECURITY

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-139-7

Price Rs. : 195/-Second Edition : 2012

By: Sanjay MalhotraJyotsna Malhotra

LINUX ANDX-WINDOWS

PROGRAMMING

Size : 20 x 30/8Pages : 220 Approx.ISBN : 978-93-5014-184-7

Price Rs. : 175/-Second Edition : 2012

By: Hitesh SinghNidhi Arora

LINUX ANDX-WINDOWS

PROGRAMMING

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-194-6

Price Rs. : 175/-First Edition : 2011

By: Dr. Neeta Awasthy

SOFTCOMPUTING

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-149-6

Price Rs. : 175/-Reprint : 2013

CONTENTS :• Introduction to Security• Classical Encryption Techniques• Modern Block Ciphers• Symmetric Key Cryptography• Mathematics of Cryptography• Asymmetric Key Cryptography• Message Authentication and

Hash Functions• Digital Signature• Key Management and Distribution• Authentication Applications and

Email Security

CONTENTS :Unit-I:• Operating System and Networking on

LinuxUnit-II:• User Management and the Linux

File SystemUnit-III:• Shell in LinuxUnit-IV:• Using the X-Window System• Appendix• Papers• Index

• IP Security• Web Security• System Security• Examination Paper• Index

CONTENTS :• Linux–The Operating System• Linux Installation• Linux Networking and Security• Processes• User Management• Filesystem Administration• Linux Commands• Linux Shell• The X-window System• X-window Management

• Appendix• Question Bank• Previous Years Question Papers• Index

CONTENTS :• Neural Networks-I

(Introduction and Architecture)• Neural Networks-II (Back Propagation

Networks)• Fuzzy Logic-I (Introduction)• Fuzzy Logic-II (Fuzzy Membership, Rules)• Genetic Algorithm (GA)• Annexures• Model Question Papers• Previous Years Question Papers• References• Index

COMPUTERS

S.K. KATARIA & SONS148

INFORMATIONTHEORY AND

CODING

By: Varun GoyalGaurav Gupta

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 220/-First Edition : 2011

DESIGN &ANALYSIS OFALGORITHMS

By: Biswajit Bhowmik

Size : 20 x 26/8Pages : 450 Approx.ISBN : 978-93-5014-135-9

Price Rs. : 240/-Second Edition : 2012

CONTENTS :• Introduction to Algorithms• Asymptotic Notations• Recursion Vs Recurrence• Divide and Conquer Paradigm• Dynamic Programming• Greedy Approach• Backtracking• Branch and Bound• Lower Bound Theory• Disjoint Set Manipulation• Graph Traversals• Matrix Manipulation Algorithms• Notion of NP-Completeness

• Approximation Algorithms• Large Integers Multiplication• File Compression• Biconnectivity• Strongly Connected Components• Topological Sorting• Dijkstra’s Algorithm• Gate Questions• Model Question Papers• Previous Years Examination Papers

(Solved)• Bibliography• Index

SOFTWAREQUALITY

ENGINEERING

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-232-5

Price Rs. : 175/-Reprint : 2013

By: Rishabh Sharma

CONTENTS :• Probability and Random Variable• Random Processes• Information Theory and Source Coding• Linear Block Codes• Convolutional Codes and Arq• Appendix• References• Previous Year Papers• Index

NEURALNETWORKS AND

FUZZY LOGIC

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-270-7

Price Rs. : 185/-First Edition : 2012

CONTENTS :• Introduction to Neural Networks• Essentials of Artificial Neural Networks• Single Layer Feed Forward Neural

Networks• Multilayer Feed Forward Neural

Networks• Associative Memory• Fuzzy• Fuzzy Logic System Components• Applications of Neural Networks and

Fuzzy Logics• Appendices• Index

By: Dr. R.P. DasL. Sreedhar

CONTENTS :• Introduction• Software Metrics Overview• Software Quality Management and

Models• Software Quality Assurance• Software Quality Assurance Standards• Software Engineering Concepts• Software Process and Methods• Software Verification, Validation and

Testing

• Questions with Answers• Model Question Papers• Examination Paper• Index

COMPUTERS

S.K. KATARIA & SONS 149

By: Rishabh Sharma

MOBILECOMPUTING

By: Ranjeeta Yadav

Introduction toMICROPROCESSOR

By: Meenakshi Agarwal

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. : 250First Edition : 2013

ADVANCEMICROPROCESSORAND INTERFACING

Size : 20 x 26/8Pages : 300 Approx.ISBN :

Price Rs. : 225First Edition : 2013

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. : 250First Edition : 2013

CONTENTS :• Introduction to Computer System

Architecture and Organisation• Boolean Algebra and Combinational

Digital Circuits• Sequential Digital Circuits• Architecture Classifications and

Multilevel View• Structured Computer

Organisation and Performance• Instruction Set Architecture (ISA)• Computer Organisation 8086

(MASM-86) and Simulation• Basic Non-Pipelined CPU

Architecture• Memory Hierarchy

Size : 20 x 30/8Pages : 350 Approx.ISBN : 81-89757-73-3

Price Rs. : 250/-Third Edition : 2011

COMPUTER SYSTEMARCHITECTURE and

ORGANISATION

By: Dr. S.P.S. SainiAnish Saini

• Input/Output Fundamentals andTechniques

• Pipelined and Parallel Processors• 80X86 Instructions and

Timing Diagrams• Microprogramming and Control

Memory• Appendix: 8086-Instruction Set• Tutorials and Assignments• Sample Paper• Examination Papers• References• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS

CONTENTS :General• Draughtsmanship and Engineering

Drawing• Conventional Representations, Scale and

AbbreviationsPart-I: Building Details• Masonry• Foundations, Plinth, Damp Proof and

Basement• Floors (Ground and Upper Floors)• Forms of Arches, Centering and Lintels• Partition Walls• Joints in Carpentry• Doors and Windows• Roofs (Sloping and Flat)• Retaining Walls• Framed Structures• R.C.C. Structures• Stairs and Staircases

• Isometric and Perspective Views• Building Drawing, Planning and DesignPart-II: Public Health Engineering• Public Health EngineeringPart-III: Irrigation• Irrigation Drawing• Swimming Pool• Wells and Tube-wells• Vastu Shastra• Index

A COURSE INCIVIL

ENGINEERINGDRAWING

CONTENTS :• Introduction to Safety• Industrial Accidents• Industrial Hazards• Planning for Safety• Safety Standards and Legislation• Basics of Environment• Industrial Fatigue• Heat Stress in Industry• Ventilation and Air-Conditioning• Noise• Vibrations• Lighting for Working• Industrial Waste• Environment Standards• Occupational Ergonomics• Occupational Stress• Occupational Health• Question Bank

Size : 23 x 36/16Pages : 350 Approx.ISBN : 81-88458-73-2

Price Rs. : 130/-Reprint : 2012

INDUSTRIALSAFETY AND

ENVIRONMENT

150

By: V.B. Sikka

By: Anupama PrasharPratibha Bansal

CONTENTS :• The Multidisciplinary Nature of

Environmental Studies• Natural Resources: Renewable and

Non-Renewable Resources• Ecosystems• Biodiversity and its Conservation• Environmental Pollution• Social Issues and the Environment• Human Population and the Environment• Selective Bibliography• Model Questions Papers• Examination Paper• Index

Size : 20 x 26/8Pages : 425 Approx.ISBN : 978-93-5014-385-8

81-88458-77-5

Price Rs. : 195/-Reprint : 2013

ENVIRONMENTALSTUDIES

By: Dr. Suresh K. Dhameja

Size : 23 x 36/8Pages : 550 Approx.ISBN : 978-93-5014-272-1

81-88458-88-0

Price Rs. : 325/-Reprint : 2013

• Sample Question Papers• Previous Years Question Papers• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS

CONTENTS :• The Multidisciplinary Nature of

Environmental Studies• Natural Resources: Renewable and

Non-Renewable Resources• Ecosystems• Biodiversity and its Conservation• Environmental Pollution• Social Issues and the Environment• Human Population and the Environment• Selective Bibliography• Index

Size : 20 x 26/8Pages : 400 Approx.ISBN : 81-88458-78-3

Price Rs. : 195/-Reprint : 2012

ENVIRONMENTALSCIENCE ANDENGINEERING

CONTENTS :• Introduction• Environment and Ecology• Environmental Pollution• Environmental Education• Science of Environment• Water Pollution• Marine Pollution• Air Pollution• Noise Pollution• Land : Use and Abuse• Landscape Pollution and Solid

Waste Management• Environmental Impacts of

Deforestation and Mining• Radio-Active and Chemical Pollution

Size : 23 x 36/16Pages : 500 Approx.ISBN : 81-85749-45-0

Price Rs. : 195/-Reprint : 2013

ENVIRONMENTALENGINEERING

ANDMANAGEMENT

151

By: Dr. Suresh K. Dhameja

By: Dr. Suresh K. Dhameja

• Energy : Sources and Scenario• Non-Conventional Sources of Energy• City and Housing Environment• Environmental Legislation• Environmental Impact Assessment• ISO : 14000 : Environmental

Management Systems• Environmental Audit• International and National Efforts at

Environment Protection• Current Environmental Issues,

Miscellaneous Topics and SomeTragic Incidents

• Selected Bibliography• Index

CONTENTS :• The Multidisciplinary Nature of

Environmental Studies• Natural Resources: Renewable and

Non-Renewable Resources• Ecosystems• Biodiversity and its Conservation• Environmental Pollution• Social Issues and the Environment• Human Population and the Environment

Size : 20 x 26/8Pages : 410 Approx.ISBN : 978-93-5014-168-7

81-88458-76-7

Price Rs. : 200/-Fourth Edition : 2011-12

ENVIRONMENTALSCIENCE

By: Dr. Suresh K. Dhameja

ENVIRONMENTAND ECOLOGY

By: Smriti Srivastava

Size : 20 x 30/8Pages : 340 Approx.ISBN : 978-93-80027-06-7

Price Rs. : 250/-Reprint : 2012

CONTENTS :• Definition of Environment• Effects of Human Actitivies on

Environment• Natural Resources• Definition of Energy• Environmental Pollution• Current Environmental Issues of

Importance• Environmental Legislation

(Two Colour Edition)

• Selective Bibliography• Model Question Papers• Examination Papers• Index

• Glossary• Model Question Papers• Previous Year Question Paper• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS152

CONTENTS :• Environmental Studies-A

Multidisiplinary Subject• Natural Resources• Ecosystem• Biodiversity and its Conservation• Environmental Pollution• Social Issues and Environment• Human Population and Environment• Glossary• Index

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-81-89757-45-8

Price Rs. : 195/-Reprint : 2012

ENVIRONMENTALSCIENCE

By: Smriti Srivastava

CONTENTS :Unit-I:• Our EnvironmentalUnit-II:• Ecosystem• Biodiversity and its ConservationUnit-III:• Perspectives of Global Environmental

IssuesUnit-IV:• Environment Pollution

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-80027-43-2

Price Rs. : 165/-First Edition : 2009

ENVIRONMENTALSCIENCE AND

ETHICS

By: Smriti Srivastava

Unit-V:• Social Issues and Environment• Model Question Papers• Previous Year Question Paper (Solved)• Index

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-089-5

Price Rs. : 120/-Second Edition : 2011

ENERGYENVIRONMENT

ECOLOGYAND SOCIETY

By: Smriti Srivastava

(For RGTU)

CONTENTS :• Energy• Ecosystem• Biodiversity• Air and Noise Pollution• Water Pollution and Disaster

Management• Society and Ethics• Index

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-322-3

Price Rs. : 195/-First Edition : 2012

A TEXTBOOK OFENERGY

ENVIRONMENTAND ECOLOGY

By: Smriti Srivastava

(For MTU)

CONTENTS :• Definition of Environment• Ecosystem• Sustainable Development and

Biodiversity• Natural Resources• Energy Resources• Environmental Pollution• Current Environmental Issues and

Climate Change• Environmental Protection and Control

Measures• Model Test Papers• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS 153

CONTENTS :• Introduction• The Earth• Geological Work of Natural Agencies• Geological Work of Water• Geological Work of Glaciers• Structural Features of Rocks• Structural Features of Rocks• Physiographic Features• The Study of Minerals• The Study of Minerals• The Study of Minerals• Study of Rocks• Study of Rocks

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-267-7

81-88458-51-1

Price Rs. : 335/-Reprint : 2012

ENGINEERINGAND GENERAL

GEOLOGY

By: Parbin Singh

• Study of Rocks• Economic Mineral Deposits• Stratigraphy of India• Engineering Properties of Rocks• Groundwater• Earthquakes• Mass Movements• Soils• Geological Investigations• Dams and Reservoirs• Tunnels and Road Cuts• Improvement of Sites• Appendix• Index

CONTENTS :• Building Stones• Clay Products• Limes• Portland Cement• Mortars & Plasters• Concrete• Timber• Ferrous Metals• Non-Ferrous Metals• Paints and Varnishes• Plastics• Miscellaneous Engineering Materials• Index

CIVILENGINEERING

MATERIALS

By: Parbin Singh

Size : 20 x 30/8Pages : 300 Approx.ISBN : 81-88458-69-4

Price Rs. : 195/-Reprint : 2013

CONTENTS :• Multidisiplinary Nature of Environment

Studies• Environmental Conservation and

Management• Environmental Pollution-I• Environmental Pollution-II• Chemical Toxicology• Eco-Friendly Polymers• Environmental Biotechnology• Green Technology and Green Chemistry

ENVIRONMENTALSTUDIES

By: Ranu GadiSunita Rattan

Sushmita Mohapatra

• Environmental Management Systems• Experiments• End-Term Examination, May 2008• Index

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-81-89757-98-4

Price Rs. : 175/-Third Edition : 2013

CONTENTS :• Multidisciplinary Nature of Environment• Natural Resources• Ecosystem• Biodiversity• Environmental Pollution• Social Issues and the Environment• Human Population and Environment• Model Question Papers• Previous Years Question Papers• Index

Fundamentals ofENVIRONMENTAL

STUDIES

By: Shivangi SomvanshiDr. Renu Dhupper

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-388-9

Price Rs. : 165/-First Edition : 2013

CIVIL ENGINEERING

S.K. KATARIA & SONS154

STEEL TABLES

By: S. Vizrani • R. Sood

Size : 20 x 30/8Pages : 177 Approx.ISBN : 978-93-80027-61-6

Price Rs. : 65/-Reprint : 2013

(MKS & S.I. Units)

CONTENTS :• Preface• Symbols• Tables• Round Bars• Square Bars• Strips• Mild Steel Flats (Cross-Sectional

Area)• Mild Steel Flats (Weight)• Plates (Surface Area)• Plates (Weights of 5 mm Plates)• Plates (Weights of 6 mm Plates)• Plates (Weights of 8 mm Plates)• Plates (Weights of 10 mm Plates)• Plates (Weights of 12 mm Plates)• Plates (Weights of 14 mm Plates)• Plates (Weights of 18 mm Plates)• Plates (Weights of 22 mm Plates)• Sheets• Rolled Steel Angles Equal in Size• Rolled Steel Angles Unequal in Size• Rolled Steel Tee Bars• Rolled Steel Beams• Rolled Steel Channels• Areas of Round Bars in Per Meter

Width of Slabs for DifferentSpacings

• Areas of Groups of Round Bars

• Reduction for Area forRivet Holes

• Rivet Gauge Distances inLegs in Angles

• Properties of Two EqualAngles Back to Back

• Properties of TwoUnequal Angles (LongerLegs Back to Back)

• Properties of TwoUnequal Angles (ShorterLegs Back to Back)

• Properties of StarredAngles (Two Equal AnglesStarred)

• Properties of StarredAngles (Two UnequalAngles Starred)

• Properties of StarredAngles (Two UnequalAngles Starred)

• Single Joist With AdditionalPlates on both Flanges (forusing as girders)

• Single Joist with Channeland Plates on both Flanges(for using as girders)

• Single Joist with additional Plates onboth Flanges (for using as columns)

• Double Joists with Flanges Butting andWelded Toe to Toe (for using ascolumns)

• Double Joists Laced or Battened (forusing as columns)

• Double channels with Flanges Buttingand Welded Toe to Toe (for using ascolumns)

• Double channels with Flanges Buttingand Welded Toe to Toe (for using ascolumns)

• Double channels Laced or Battened(for using as columns)

• Safe loads for Single Angle Struts-EqualAngles (single bolted or single rivetedend connections)

• Safe loads for Single Angle Struts-Unequal Angles (double bolted orsingle riveted end connections)

• Safe loads for Single Angle Struts-EqualAngles (double bolted or doubleriveted end connections)

• Safe loads for Single Angle Struts-Unequal Angles (double bolted ordouble riveted end connections)

• Safe Concentric loads on Rolled Steelcolumn sections (H-Beams being usedas columns)

• Safe concentric loads on ChannelSections (being used as columns)

• Moment of Inertia of two Flanges percentimeter width about the x-x axis

• Moment of Intertia of one web plateabout its x-x axis

• Preferred cut sizes of Structural Timberfor Roof Tissues (3 to 20 m)

• Safe permissible stresses for IndianTimbers (Standard Grade)

• Reinforcement Percentage & Momentfactor for Beams (Singly reinforcedrectangular sections)

• Reinforcement Percentage & Momentfactor for Beams (Doubly reinforcedrectangular sections)

• Reinforcement Percentage & Momentfactor for Beams (Singly reinforced T-sections)

• Recommended clear span to effectiveDepth ratios in beams

• Moment capacity and steel area (Singlyreinforced rectangular sections)

• Additional Moment Carrying capacity(Doubly reinforced rectangularsections)

• Moment capacity (Per meter flangewidth of T-beam)

• Shear capacity of concrete• Strength of shear reinforcement

(Two leg vertical stirrups 10 mmdiameter)

• Strength of shear reinforcement (Bentup bars)

• Clear span to effective depth ratios inslabs (Recommended values)

• Minimum reinforcement in slabs• Reinforcement factor for slabs (Per

meter width of slabs)• Moment capacity (per meter width of

two way slabs)• Annexure I: S.I. Units for Structural

Engineers• Annexure II: Conversion factors for

S.I. Units• Annexure III: Conversion Table kgf to

newtons• Annexure IV: Conversion table

newtons to kgf• Annexure V: Guidelines for detailing of

members

CONTENTS :Part-A: Principles of Tunnelling• Introduction• Geological Investigations• Alignment and Grade• Tunnelling Through Rocks• Mocking and Haulage• Tunnelling Through Soft Ground• Tunnel Support System• Ventilation in Tunnels• Hydropower Tunnels• General ConsiderationsPart-B: Ports, Harbours and Docks• Harbours & Ports

(Development & Classification)

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-58-6

Price Rs. : 165/-Reprint : 2011

PRINCIPLES OFTUNNELLING

PORTS &HARBOURS

By: Parbin Singh

• Harbour Planning and Layout• Natural Phenomena• Marine Structures• Docks• Essential Facilities• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS 155

CONTENTS :Part-I: Water Supply Engineering• Introduction• Quantity of Water• Sources of Water• Quantity of Water• Water Treatment• Conveyance of Water• Laying Out Pipes• Building Water Supply• Water Pollution Control and

Management• Multiple Choice Objective Type

QuestionsPart-II: Waste Water Engineering• Introduction

Size : 23 x 36/16Pages : 250 Approx.ISBN : 978-93-5014-376-6

81-85749-76-0

Price Rs. : 150/-Reprint : 2013

WATER SUPPLYAND

WASTE WATERENGINEERING

By: D. LalA.K. Upadhyay

CONTENTS :• Introduction• Laws of Forces• Moment• Friction• Centre of Gravity• Moment of Inertia• Laws of Motion• Motion of Connected Bodies• Circular Motion

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-5014-406-0

81-85749-54-X

Price Rs. : 250/-Fifth Edition : 2013

APPLIEDMECHANICS

By: A.K. Upadhyay

• Simple Lifting Machines• Laboratory Experiments• Previous Years Question Papers with

Solutions• Index

CONTENTS :Part-A: Highways• Introduction• Road Geometrics• Highway Surveys and Plans• Road Materials• Road Pavements• Hill Roads• Road Drainage• Road Maintenance• Traffic Engineering• Construction Equipment• Roadside AboriculturePart-B: Railways• Introduction

Size : 20 x 26/8Pages : 350 Approx.ISBN : 81-85749-63-9

Price Rs. : 165/-Reprint : 2012

TRANSPORTATIONENGINEERING

By: A.K. Upadhyay

• Alignment and Survey• Permanent Way• Rails• Sleepers• Ballast• Fixtures and Fastenings• Tracks Geometrics• Points and Crossings• Stations and Yards• SignallingPart-C: Bridges• BridgesPart-D: Tunnels• Tunnels• Experiments • Index

CONTENTS :Part-I: Construction Management• Introduction• Construction Planning• Organization• Site Organization• Construction Labour• Control of Progress• Inspection and Quality Control• Accidents and Safety in ConstructionPart-II: Construction Equipment• Introduction - Choice of Construction

Equipment• Tractors, Bulldozers, Scraper and Earth

Loader

Size : 23 x 36/16Pages : 375 Approx.

ISBN : 978-93-5014-259-2

Price Rs. : 150/-Reprint : 2013

CONSTRUCTIONMANAGEMENT

ANDP.W.D. ACCOUNTS

By: D. Lal

• Shovels, Draglines and Clamsheels• Trenching Machine and CranesPart-III: P.W.D. Accounts• Introduction• Organization of Public Work Department• Out Line of P.W.D. System of Accounts• Cash• Stores• Works• Payment for Works• Duties of a Junior Engineer or Sectional

Officer and S.D.E.• Model Test Papers

• Quantity of Sewage• Sewerage System• Laying and Construction of Sewers• Quality of Sewage• Natural Methods of Sewage Disposal• Sewage Treatment• Activated Sludge Process• Building Drainage• Rural Sanitation• Maintenance• Multiple Choice Objective Type

Questions• Experiments• Appendix

CIVIL ENGINEERING

S.K. KATARIA & SONS156

Size : 20 x 26/8Pages : 300 Approx.ISBN : 81-88458-08-2

Price Rs. : 150/-Reprint : 2013

SOIL ANDFOUNDATIONENGINEERING

By: A.K. Upadhyay

CONTENTS :• Introduction• Physical Properties of Solids• Soil Classification and Identification• Flow of Water Through Soil

(Permeability)• Effective Stress• Deformation of Soils• Strength Characteristics of Soils• Compaction• Bearing Capacity• Soil Exploration• Foundation Engineering

• Laboratory Experiments• Appendix• Index

CONTENTS :• Introduction• Properties of Fluids• Hydrostatic Pressure• Measurement of Pressure• Fundamental of Fluid Flow• Orifice and Mouthpiece• Flow Through Pipes• Flow Measurement• Hydraulic Turbines• Hydraulic Pumps• Hydraulic Devices• Introduction to Oil Power Hydraulics

and Pneumatics

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-80027-44-9

Price Rs. : 195/-First Edition : 2010

HYDRAULICSAND

PNEUMATICS

By: A.K. Upadhyay

• Components of Hydraulic System• Components of Pneumatic System• Experiments• Index

CONTENTS :• Estimating and Costing• Building Estimates• Reinforced Cement Concrete Work

(R.C.C. Work)• Analysis of Rates• Earthwork in Irrigation Channel and

Roads• Retaining Walls and Roads• Public Health Engineering• Valuation• Contracting• Billing• Index

Size : 20 x 30/8Pages : 474 Approx.ISBN : 81-85749-98-1

Price Rs. : 250/-Reprint : 2013

CIVILESTIMATING &

COSTING(INCLUDING QUALITY

SURVEYING, TENDERINGAND VALUATION)

By: A.K. Upadhyay

CONTENTS :• Introduction• Properties of Fluids• Static Pressure• Measurement of Pressure• Fundamentals of Fluid Flow• Flow Measurement• Orifice and Mouthpiece• Flow Through Pipes• Flow Through Open Channels• Hydraulic Turbines• Hydraulic Pumps

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-93-80027-72-2

Price Rs. : 225/-Reprint : 2012

FLUIDMECHANICS(HYDRAULICS)

By: A.K. Upadhyay

• Hydraulic Devices• Experiments• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS 157

Size : 20 x 30/8Pages : 375 Approx.ISBN : 978-93-5014-103-8

Price Rs. : 210/-Reprint : 2012

By: A.K. Upadhyay

STRENGTH OFMATERIALS

CONTENTS :• Properties of Materials• Stresses and Strains• Shear Force and Bending Moment• Centre of Gravity• Moment of Inertia• Bending and Shear Stresses• Slope and Deflection• Columns and Struts• Combined Direct and Bending Stress

• Torsion• Springs• Experiments• Index

STEELSTRUCTURES

Size : 20 x 26/8Pages : 350 Approx.ISBN : 978-93-5014-209-7

Price Rs. : 195/-Reprint : 2013

By: A.K. Upadhayay

CONTENTS :• Introduction• Riveted Connections• Welded Connections• Tension Member• Compression Member (Struts)• Columns• Beams• Roof Trusses• Steel Drawings• Appendix• Question Paper• Index

HIGHWAYENGINEERING

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-288-2

Price Rs. : 150/-First Edition : 2012

By: A.K. Upadhayay

CONTENTS :• Introduction• Road Geometrics• Highway Surveys and Plans• Road Materials• Road Pavements• Hills Roads• Road Drainage• Road Maintenance• Traffic Engineering• Construction Equipment• Roadside Arboriculture

• Airport Engineering• Experiments• Previous Years Question Papers• Index

CONTENTS :• Properties of Materials• Stresses and Strains• Shear Force and Bending Moment• Centre of Gravity• Moment of Intertia• Bending and Shear Stresses• Slope and Deflection• Columns and Struts• Combined Direct and Bending Stress• Analysis of Trusses

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-065-9

Price Rs. : 195/-Reprint : 2012

STRUCTURALMECHANICS

By: A. K. Upadhyay

• Experiments• Previous Years Question Papers• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS158

By: Neelam Sharma

CONTENTS :Part-I: R.C.C. Design• Introduction• Introduction to Working Stress Method

(Theory of R.C.C. Beams)• Shear and Bond• Introduction to Limit State Method• Limit State of Collapse Flexure and Shear• Design of Singly Reinforced Beams• Doubly Reinforced Beams• T-Beams• One Way Slab• Two Way Slab

Size : 20 x 26/8Pages : 425 Approx.ISBN : 978-93-80027-69-2

Price Rs. : 250/-Reprint : 2013

R.C.C.DESIGN &DRAWING

• Columns• Footings• Design of StairsPart-II: Prestressed Concrete• Prestressed ConcretePart-III: R.C.C. Drawings• R.C.C. Drawings• Appendix: Use of Design Aids• Solved Question Paper• Index

CONTENTS :• Engineering Seismology• Structural Dynamics• Seismic Performance of Traditionally• Introduction to Seismic Design Codes:

IS 4326:1993 and 13828:1993• Seismic Performance of Reinforced

Concrete Buildings• Ductile Detailing of Reinforced Concrete

Buildings (IS 13920:1993)• Introduction to IS 1893 (Part 1) : 2002• Seismic Provisions of Strengthening and

Retrofitting

Size : 20 x 26/8Pages : 225 Approx.ISBN : 978-93-5014-204-2

81-89757-54-7

Price Rs. : 135/-Reprint : 2012

EARTHQUAKERESISTANTBUILDING

CONSTRUCTION

By: Neelam Sharma

• Disaster Management• Annexure : Special Construction

Methodologies-Smart Buildings• Model Question Papers• Examination Paper• References• Index

By: Neelam Sharma

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-336-0

Price Rs. : 165/-First Edition : 2012

BUILDINGCONSTRUCTION

RAILWAYSBRIDGES AND

TUNNELS

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-289-9

Price Rs. : 150/-Reprint : 2013

By: A.K. Upadhyay

CONTENTS :Part-A: Railways• Introduction• Alignment and Survey• Permanent Way• Rails• Sleepers• Ballast• Fixtures and Fastenings• Track Geometrics• Points and Crossings• Station and Yards• Signalling• Track Laying• Maintenance of TrackPart-B: Bridges• Introduction

• Classification of Bridges• Site-selection Investigations and

Collections of Data• Foundation• Piers, Abutments and Wing Walls• Bridge Bearings• Temporary Bridges• Permanent Bridges• Construction and Numbering of Bridges• Maintenance of BridgesPart-C: Tunnels• Introduction• Tunnelling• Experiments• Previous Years Question Papers• Index

CONTENTS :• Introduction• Foundations• Walls• Brick Masonary• Stone Masonary• Lintels and Arches• Doors and Windows• Damp Proofing and Water Proofing• Floors• Roof• Stairs• Surface Finishes

• Concept of Seismic Planning of Buildings• Building Planning• Anti-termite Treatment in Buildings• Examination Papers• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS 159

CONTENTS :• Surveying• Building Materials• Building Construction• Estimating and Costing• Strength of Materials• Applied Mechanics (Including Graphic

Statics)• Fluid Mechanics & Hydraulic

Mechanics• Soil Mechanics and Foundation

Engineering,• Hydrology and Water Resources

Engineering

QUESTION BANK INCIVIL

ENGINEERING

By: V.S. MurthyR. Sood

• Structural Analysis (Theory of Structures)• Design of R.C.C. and Masonry Structures• Design of Steel Structures• Transportation Engineering I (Railways)• Transportation Engineering II (Highways,

Airways, Harbour)• Environmental Engineering I

(Water Supply)• Environmental Engineering II (Sewerage

Treatment and Disposal and Air andWater Pollution and Control)

• Construction Practice, Planning andManagement

• Computer Programming

Size : 20 x 30/8Pages : 1200 Approx.ISBN : 81-85749-39-6

Price Rs. : 395/-Reprint : 2012

BRIDGEENGINEERING

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. : 225/-First Edition : 2013

FUNDAMENTALS OFSTRUCTUREANALYSIS

By: M.K. Pant

Size : 23 x 30/8Pages : 280 Approx.ISBN : 978-93-5014-328-5

Price Rs. : 195/-First Edition : 2012

CONTENTS :Part-I:• Introduction• Statically Determinate and Indeterminate

Structures• Stress and Strains• Bending Stresses in Beams• Columns and Struts• Deflection of Beams• Principle of Virtual Work Done

Part-II:• Strain Energy Concept-Indeterminate

Structures

• Slope Deflection Method• Moment Distribution Method• Three Hinged Arch• Shear Force and Bending Moment in

Beams and Frames• Unsymmetrical-Bending• Cables and Suspension Bridges• Analysis of Statically Determinate

Trusses/Frames• Two Hinged Arch• Useful-Data• Index

By: M.K. Pant

By: Naveen Makhijani

Size : 20 x 26/8Pages : 250 Approx.ISBN :

Price Rs. : 150/-First Edition : 2013

CONCRETETECHNOLOGY

CIVIL ENGINEERING

S.K. KATARIA & SONS160

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-401-5

Price Rs. : 165/-First Edition : 2013

HYDRAULICSAND

HYDRAULICMACHINES

By: Annu Pandey

CONTENTS :• Introduction• Properties of Fluids• Hydrostatic Pressure• Measurement of Pressure• Fundamentals of Flow• Orifices• Flow Through Pipes• Hydraulic Devices• Hydraulic Turbines• Pumps• Flow Measurement• Oil Power Hydraulics and Pneumatics

FLUIDMECHANICS &PNEUMATICS

By: A.K. ChoudharyOm Prakash

• Components of Hydraulic System• Components of Pneumatics System• Experiments• Index

Size : 23 x 36/16Pages : 425 Approx.

Price Rs. : 150/-Reprint : 2012

STRENGTHOF

MATERIALS

Size : 20 x 30/8Pages : 865 Approx.ISBN : 978-93-5014-166-3

Price Rs. : 350/-Reprint : 2012

By: Surendra Singh

CONTENTS :• Stresses and Strains• Principal Stresses• Impact Loads and Resilience• Centroid and Moment of Inertia• Shear Force and Bending Moment• Stresses in Beams• Slope and Deflection• Propped Cantilevers and Beams• Fixed Beams• Continuous Beams• Combined Direct and Bending Stresses

• Columns and Struts• Determinate Frames• Thin Cylindrical Shells• Thick Cylindrical Shells• Torsion• Springs• Bending of Curved Bars• Unsymmetrical Bending• Theories of Elastic Failure• Index

CONTENTS :• Open Channel Flow• Uniform Flow• Non-Uniform Flow-I• Non-Uniform Flow-II (Rapidly Varied

Flow)• Mobile Bed Channel Hydraulics• Hydraulic Mahcines• Experiments• Previous Years Questions Papers• References• Index

Size : 20 x 26/8Pages : 250 Approx.ISBN : 978-93-5014-369-8

Price Rs. : 150/-First Edition : 2012

FUNDAMENTALS OFCONSTRUCTION

PLANNING &MANAGEMENT

By: Dr. M.R. Sharma

CONTENTS :• Introduction• Engineering Contracts and Arbitration• Construction Planning• Construction Organization• Network Technologies for Project

Management-PERT• Critical Path Method• Cost Time Balancing• Inspection and Quality Control• Selection and Performance of Construc-

tion Equipment• Equipments for Concrete Construction

and Excavation

• Equipment for Pumping Water• Piles and Pile-Driving Equipment• Foundation Grouting Equipments• Production of Crushed Stone Aggregates• Tunneling Equipment• Examination Papers• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS 161

ENVIRONMENTALENGINEERING-II

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-73-9

Price Rs. : 195/-First Edition : 2013

ENVIRONMENTALENGINEERING-I

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-334-6

Price Rs. : 185/-First Edition : 2012 By: Saurabh Kumar Soni

By: Saurabh Kumar Soni

CONTENTS :• Water Demand and Domestic Use• Transmission of Water• Storage and Distribution of Water• Waste Water Collection• Multiple Choice Questions• Appendices• Previous Years Question Papers• Index

CONTENTS :• Water and Wastewater Characteristics• Sedimentation• Filtration and Disinfection• Wastewater Treatment• Anaerobic Digestion• Experiments / Practicals• Appendices• Previous Years Question Papers• Index

Size : 20 x 26/8Pages : 300 Approx.ISBN : 978-93-5014-403-9

Price Rs. : 165/-First Edition : 2013

HYDRAULICSAND

HYDRAULICSMACHINES

By: M. Umar Khan

CONTENTS :• Introduction to Open Channel Flow and

Specific Energy• Uniform Flow through Open Channel• Gradually Varied Flow• Rapidly Varied Flow and Hydraulic Jump• Hydraulic Machines• Mobile Bed Channel Hydraulics• Objective Type Questions• Previous Years Question Papers• Index

CONSTRUCTIONPLANNING

MANAGEMENTAND EQUIPMENT

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. : 195/-First Edition : 2013

By: Saurabh Kumar Soni

GEOTECHNICALENGINEERING

Size : 20 x 30/8Pages : 300 Approx.ISBN :

Price Rs. : 175/-First Edition : 2013

By: Saurabh Kumar Soni

CIVIL ENGINEERING

S.K. KATARIA & SONS162

Size : 20 x 26/8Pages : 250 Approx.ISBN :

Price Rs. : 150/-First Edition : 2013

TRANSPORTATIONENGINEERING-I

By: Amit K. Yadav

Size : 20 x 30/8Pages : 280 Approx.ISBN : 978-93-5014-183-0

Price Rs. : 195/-Second Edition : 2012

WATER ANDWASTE WATER

SYSTEMS

By: Dr. Poonam AhluwaliaDr. Arvind K. Nema

CONTENTS :• River Water Resource: Management

and Conservation• Lake Preservation in Urban Growth

Centres• Water Conveyance Systems:

Challenges and Trends• Water Treatment Technologies• Water Tariff Structures• Sustainable Water Management in

View of Led Requirements• Wastewater Conveyance System

• Wastewater Treatment: Overview andComparison

• Effective Artificial RechargingMethods/Techniques

• Public Private Partnerships inWater and Wastewater Sector:Challenges

• Administrative, Policy and LegalFramework for Water andWastewater Projects in India

• Annexures• Index

TRANSPORTATIONENGINEERING

By: Alok Goyal

Size : 20 x 26/8Pages : 300 Approx.ISBN :

Price Rs. : 195/-First Edition : 2013

BUILDINGMATERIAL AND

CONSTRUCTION

By: Saurabh Kumar SoniSize : 20 x 26/8Pages : 300 Approx.

Price Rs. : 195/-First Edition : 2013

TRANSPORTATIONENGINEERING-II

By: Amit K. Yadav

Size : 20 x 26/8Pages : 250 Approx.ISBN :

Price Rs. : 165/-First Edition : 2013

CIVIL ENGINEERING

S.K. KATARIA & SONS 163

Size : 20 x 30/8Pages : 280 Approx.ISBN : 978-93-5014-186-1

Price Rs. : 250/-Reprint : 2012

Size : 20 x 30/8Pages : 1000 Approx.ISBN : 978-93-5014-131-1

Price Rs. : 395/-Reprint : 2012

By: S.R. Sahasrabudhe

IRRIGATIONENGINEERING &

HYDRAULICSTRUCTURES

CONTENTSPart-I: Irrigation Engineeringand Management of IrrigationWater• Introduction• Principles of Water

Management-Soils-Water-Crops and TheirRelationship (I)

• Soils-Water-Crops and TheirRelationship (II) (WaterRequirements of Crops)

• Flow or Canal Irrigation• Design of Irrigation Canals

(On Alluvial and Non-AlluvialSoils)

• Canal Regulators• Falls (Drops) and Flumes• Cross Drainage Works• Structures for Silt Control• Outlets and Tail ClustersPart-IV: Engineering Hydrology• Elements of Hydrology• Precipitation and its Measurement• Water Losses (Interception, Infiltration

and Evaporation)• Stream Gauging• Runoff• Estimation of Peak Flow and Flood

RoutingPart-V: Reservoirs and Storage Dams• Reservoirs and Their Regulation• Types of Dams and Foundation

Treatment• Gravity Dams• Arch and Buttress Dams• Earth and Rockfill Dams• Spillways, Sluices and Crest Gates

(Including Energy Dissipaters)• Hydropower Stations• Appendix• Index

• Construction and Maintenance ofIrrigation Canals

• Losses in Canals and Lining of IrrigationCanals (Design of Lined Canals)

• Methods of Irrigation• Water-Logging and Its Remedies

(Including Drainage and ConjunctiveUse of Surface and Ground Water)

• Irrigation Water Management• Tank Irrigation• Sprinkler Irrigation Micro Irrigation (I)• Drip Irrigation Micro Irrigation (II)• Investigation and Preparation of Irrigation

Projects• Important Irrigation Projects

(Constructed After Independence)Part-II: Ground Water Engineering andIrrigation by Wells• Fundamentals of Ground Water• Hydraulics of Wells• Tube Well Irrigation• Open Well Irrigation• Techniques of Ground Water

Development• Ground Water QualityPart-III: Headworks andCanal Structures• Rivers their Behaviour and Training• Canal Headworks• Weirs on Permeable Foundations

WATERRESOURCES

ENGINEERING

By: S.R. Sahasrabudhe

CONTENTS :• Elements of Hydrology• Precipitation and its Measurement• Interception, infiltration and Evaporation• Surface Runoff• Peak Flow and its Estimation• Irrigation Development in India• Water Requirement of Crops• Canal Irrigation• Design of Irrigation Canals (on Alluvial

and Non-Alluvial Soils)• Linning of Irrigation Canals (Design of

Lined Canals)

• Waterlogging and its Remedies(Including Drainage and ConjunctiveUse of Surface and Ground Water)

• Regulation and Control ofCannel System

• Irrigation Outlets• River Training• Measurement of River Discharge• Fundamentals of Ground Water• Open Well Irrigation• Tubewell Irrigation• Index

Size : 20 x 26/8Pages : 375 Approx.ISBN : 978-93-5014-219-6

Price Rs. : 175/-Eleventh Edition : 2013

A TEXTBOOK OFIRRIGATION

ENGINEERING

By: S.R. Sahasrabudhe

CONTENTS :• Introduction• Sails and Crops• Water Requirement of Crops• Hydrology (Rainfall and Run-off)• Methods of Irrigation• Canal (Flow) Irrigation• Design of Irrigation Canal• Open Well Irrigation• Tube Well Irrigation• Tank Irrigation• Sprinkler Irrigation• Drip Irrigation

• Gravity Dams• Earth Dams and Spillways• Canal Head Works• Cross Drainage Works• Regulatory Hyraulic Structures• River Training Works• Water-Logging and Drainage• Hydro Power Stations• Investigation and Preparation of

Irrigation Projects• Annexure• Index

CIVIL ENGINEERING

S.K. KATARIA & SONS164

Size : 20 x 26/8Pages : 350 Approx.ISBN :

Price Rs. : 175/-First Edition : 2013

DESIGN OFCONCRETE

STRUCTURE-I

By: Sujeet Kumar

IRRIGATIONENGINEERING

By: V.C. Aggarwal

Size : 20 x 30/8Pages : 300 Approx.

Price Rs. : 225/-First Edition : 2013

GEOINFORMATICS

By: Ruby Srivastava

Size : 20 x 26/8Pages : 200 Approx.

Price Rs. : 195/-First Edition : 2013

Size : 20 x 26/8Pages : Approx.ISBN :

Price Rs. : 195/-First Edition : 2013

DESIGN OFCONCRETE

STRUCTURE-II

By: Sujeet Kumar

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 225/-First Edition : 2013

RCCDESIGN

By: Neelam Sharma

RCCDESIGNNeelam Sharma

Size : 20 x 30/8Pages : 400 Approx.ISBN :

Price Rs. : 225/-First Edition : 2013

TOWNPLANNING &

ARCHITECTURE

By: Md. Nuruzamma

Md. Nuruzamma

TOWNPLANNING &

ARCHITECTURE

APPLIED SCIENCE

S.K. KATARIA & SONS

CONTENTS :• Number System and Error Analysis• Algebraic and Transcendental Equations• Simultaneous Linear Algebraic Equations• Matrix Inversion and Eigne Values• Curve Fitting and Method of Least

Squares• Finite Differences• Interpolation• Numerical Differentiation• Numerical Integration• Ordinary Differential Equation

NUMERICALMETHODS

165

By: Girish Nayyar

Size : 20 x 30/8Pages : 700 Approx.ISBN : 978-93-80027-96-8

Price Rs. : 250/-First Edition : 2009-10

CONTENTS :• Introduction• Communication: Its Types and

Significance• Reading Skills• Writing Skills• Grammar• Syntax• One Word Substitution,

Abbreviations, TechnicalTerms and Idioms and Phrases

• Phonetics• Listening Skills• Speaking Skills• Campus Recruitment, Interview and

Group Discussion• Meetings Negotiations Phone and

Mobile Phone Skills• Business Correspondence

THE FUNCTIONALASPECTS OF

COMMUNICATIONSKILLS

By: Dr. P. Prasad

Size : 20 x 30/8Pages : 325 Approx.ISBN : 978-93-5014-165-6

81-88458-31-7

Price Rs. : 230/-Reprint : 2013

CONTENTS :• Introduction• Basics of Technical Communication• Synonyms and Antonyms, Homonyms

and Homophones, and Words used asDifferent Parts of Speech

• Idioms and Phrases, One WordSubstitution, Technical Terms

• Paragraph and Art of Condensation• Technical Communication• Job Application, Resume and Official

Correspondence• Legal and Social Correspondence• Reports and Technical Proposals• Technical and Research Papers• Presentation Strategies and Nuances of

Delivery• Networking and Negotiation Skills• Reading Comprehension and Paraphase• Essay Writing, Journalistic and T.V.

Write-UPS• Phonetics

• Structure of Sentences / Clauses• Applied Grammar and Usage• Conclusion• Index

PROFESSIONALCOMMUNICATION

By: P. Prasad

• Numerical Solution of PartialDifferential Equations

• Bibliography

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-80027-60-9

Price Rs. : 175/-Second Edition : 2010-11

(A Programming Approach)

(Global Good English)

• Fax and Email in BusinessCorrespondence

• Legal and Social Correspondence• Technical and Scientific Report• Conclusion: Soft Skills for Global

Leadership• Previous Years Solved

Question Papers• Index

APPLIED SCIENCE

S.K. KATARIA & SONS166

Size : 20 x 30/8Pages : 800 Approx.ISBN : 81-88458-27-9

Price Rs. : 295/-Reprint : 2012

ENGINEERINGPHYSICS

By: Dr. Abhijit Nayak

CONTENTS :Unit-I: Properties of Matter• Vectors• Kinematics• DynamicsUnit-II: Heat• Temperature Measurement and Heat

Radiation• ThermoelectricityUnit-III: Optics• Interference• Diffraction• Polarization• Optical Instruments• Laser• Holography and Fiber OpticsUnit-IV: Waves and Oscillations• Oscillations• Wave Motion• Acoustics• UltrasonicsUnit-V: Electricity and Magnetism• Electrostatics• Magnetostatics

• Electromagnetism• Maxwell’s EquationUnit-VI: Modern Physics and StatisticalMechanics• Atomic Physics• Quantum Mechanics• X-Rays• Nuclear Radiations• Special Theory and Relativity• Statistical MechanicsUnit-VII: Solid State• Semiconductors• Crystal Structure, Diffraction &

Reciprocal Lattice• Superconductivity• Magnetic Properties of MaterialUnit-VIII: Universe• Universe• Appendices• Experiments• Model Question Papers• Previous Years Question Papers• Index

CONTENTS :Part-A: Communication Skills• Communication Meaning and Process• Channels of Communication• Media of Communication• Listening—Process and Types• Feedback Skills• Note Making and Note Taking• Barriers to Communication• Group Discussion• Meeting Skills• Telephonic Skills• Skills of Effective Writing• Writing Styles• Scientific and Technical Writing• Speaking Skills

Size : 23 x 36/16Pages : 325 Approx.ISBN : 81-89757-82-2

Price Rs. : 140/-Reprint : 2013

EFFECTUALCOMMUNICATION

SKILLS

By: Bhupender Kour

• Process of Reading• Efficient Reading• Reading Skills Methodologies• Elements of Business Correspondence• Types of Business Letter Writing• Report WritingPart-B: Grammar• Transformation of Sentences• Corrections of Incorrect Sentences• One Word Substitutions• Short Answer Type Questions• Previous Years Examination Papers• Index

By: Dr. Rakesh Dogra

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-152-6

81-85749-43-4

Price Rs. : 230/-Reprint : 2012

ESSENTIALS OFPHYSICS

CONTENTS :• Electromagnetic Waves and

Dielectrics• Magnetic Materials and

Superconductivity• Elements of

Crystallographys• Lasers• Fibre Optics• Special Theory of Relativity• Quantum Theory• Nanophysics• Quick Review to Important

Definitions• Experiments (PTU Syllabus)

• Tables of Various Physical Quantities• Model Papers• Previous PTU Examination Papers• Index

APPLIED SCIENCE

S.K. KATARIA & SONS 167

CONTENTS :Engineering Physics-1: Unit-I• Relativistic MechanicsUnit-II: Optics-1• Interference• DiffractionUnit-III: Optics-II• Polarization• LasersUnit-IV:• Fibre Optics and HolographyEngineering Physics-II: Unit-I• Wave Mechanics and X-Ray Diffraction

ENGINEERINGPHYSICS

By: Dr. Rakesh Dogra

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-81-89757-60-1

Price Rs. : 250/-Reprint : 2010

(For UPTU)

CONTENTS :Section-A: Theory• Waves and Vibrations• Applications of Sound Waves• Optics• Electrostatics• DC Circuits• Electromagnetism• Semiconductor Physics• Modern PhysicsSection-B: Objective PhysicsSection-C: Experimental PhysicsSection-D: Board Examination Papers

Size : 20 x 30/8Pages : 450 Approx.ISBN : 81-89757-36-9

Price Rs. : 195/-First Edition : 2010

APPLIEDPHYSICS-II

By: Manpreet SinghDr. Major Singh

Mrs. Hitaishi Gupta

CONTENTS :Section-A: Theory• Units and Dimensions• Force and Motion• Work, Power and Energy• Rotational Motion• Properties of Matter• ThermometrySection-B: Experimental Physics• Experiments• PSBTE Question Papers with Solutions• Index

Size : 20 x 30/8Pages : 400 Approx.

Price Rs. : 195/-Second Edition : 2010

APPLIEDPHYSICS-I

By: Manpreet SinghDr. Major Singh

Mrs. Hitaishi Gupta

CONTENTS :• Vibrations of Stretched String• Thermal Conductivity• Photo Diodes• Semi-Conductor Diode• Refractive Index• Interference, Diffraction and Polarization• Energy Gap• Optical Fibre• Ultrasonic Interferometer• Laser Parameter• Alternating Current Experiments• Various Fundamental Constants• Index

Size : 20 x 26/8Pages : 200 Approx.ISBN : 81-88458-72-4

Price Rs. : 90/-First Edition : 2005

PHYSICSEXPERIMENTS

FORENGINEERS

By: Dr. Saroj Sharma

Unit-II:• Dielectric and Magnetic Properties• UltrasonicsUnit-III:• ElectromagneticsUnit-IV:• Superconductivity• Science and technology of

Nanomaterials• Table of Various Physical Quantities• Examination Papers• Index

APPLIED SCIENCE

S.K. KATARIA & SONS168

Size : 20 x 30/8Pages : 300 Approx.ISBN : 978-93-5014-337-7

Price Rs. : 250/-First Edition : 2012

ENGINEERINGPHYSICS-I

By: Dr. Rajesh Mishra

CONTENTS :• Introduction to Discrete Structures• Set Theory• Relations• Functions• Groups• Rings and Fields• Posets, Hasse Diagrams and Lattices• Boolean Algebra• Prepositional Logic• Counting Technique• Discrete Numeric Functions and

Generating Functions• Recurrence Relations

DISCRETEMATHEMATICAL

STRUCTURES

By: Adesh K. PandeyDr. Rakesh Dube

Size : 20 x 26/8Pages : 400 Approx.ISBN : 81-89757-37-7

Price Rs. : 225/-Third Edition : 2010

CONTENTS :• Set Theory• Propositional Calculus and Formal Logic• Methods of Proof• Combinatorics• Relation• Lattices• Boolean Algebra• Recurrence Relation• Graph Theory• Algebraic Structure• Matrices

• Finite State Machine• Logic Programming• Appendices• Miscellaneous Exercises• Previous Years Solved Question Papers• Index

DISCRETEMATHEMATICS

By: Anjana Gupta

Size : 20 x 26/8Pages : 560 Approx.ISBN : 978-93-5014-271-4

81-88458-01-5

Price Rs. : 275/-Fourth Edition : 2012

Foundation of Computer Science

• Graph• Trees• Introduction to Theory of Automata• Automata with Output• Previous Years Examination Papers• Index

CONTENTS :• Review of Elementary Quantum

Mechanics• Introduction to Laser• Laser Systems• Applications of Laser-I• Applications of Laser-II• Model Question Papers• Previous Year Question Paper• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-80027-79-1

Price Rs. : 175/-Reprint : 2011

LASER SYSTEMSAND

APPLICATIONS

By: Dr. Rajesh Mishra

CONTENTS :• Relativistic Machines• Electromagnetics• Interference• Diffraction• Polarisation of Light and Double

Refraction• Introduction to Laser• Optical Fibres• Model Question Papers• Index

APPLIED SCIENCE

S.K. KATARIA & SONS 169

CONTENTS :Unit-I: Algebra• Complex Numbers and Algebra

of Complex Numbers• Arithmetic Progression• Application of Arithmetic Progressions• Geometric Progression• Application of Geometric Progression• Partial Fractions• Permutation and Combination• Binomial Theorem• Application of Binomial TheoremUnit-II: Trigonometry• Angles

Size : 20 x 30/8Pages : 550 Approx.

Price Rs. : 240/-Second Edition : 2009

APPLIEDMATHEMATICS-I

By: Anita Sachdeva

• T-Ratios of Angles• T-Ratios of Standard Angles• T-Ratios of Applied Angles• Addition and Substraction Formulae• Transformation of Products and Sums• T-Ratios of Multiple and Sub-

Multiple Angles• GraphsUnit-III: Co-Ordinate Geometry• The Point• The Straight Line• The Circle• Examination Paper• Index

CONTENTS :• Set Theory• Relation• Function• Algebraic Structures• Rings and Fields• Posets, Hasse Diagrams and Lattices• Boolean Algebra• Graphs• Euler and Hamiltonian Graphs• Tree• Planar Graphs• Matrix Presentation of Graphs

DISCRETESTRUCTURES

By: K. Patrai

Size : 20 x 26/8Pages : 550 Approx.ISBN : 978-81-907386-1-3

Price Rs. : 265/-Reprint : 2012

• Colouring of Graphs• Propositional Calculus and Formal Logic• Methods of Proof• Finite State Machines• Combinatorics• Examination Papers• Index

CONTENTS :• Set Theory• Relation• Function• Algebraic Structures• Rings and Fields• Propositional Calculus and Formal Logic• Methods of Proof• Finite State Machines• Graphs• Euler and Hamiltonian Graphs

Size : 20 x 26/8Pages : 425 Approx.

ISBN : 978-93-80027-48-7

Price Rs. : 175/-Reprint : 2012

DISCRETESTRUCTURES

By: Kalika Patrai

(For RGTU)

• Tree• Colouring of Graphs• Posets, Hasse Diagrams and Lattices• Combinatorics

(For UPTU)

CONTENTS :• Introduction to Discrete Structures• Set Theory• Relations• Functions• Boolean Algebra• Propositional Logic• Counting Techniques• Discrete Numeric Functions and

Generating Functions• Recurrence Relations• Groups

DISCRETESTRUCTURES

By: Adesh K. Pandey

Size : 20 x 26/8Pages : 400 Approx.ISBN : 978-93-5014-072-7

Price Rs. : 195/-First Edition : 2010

• Rings and Fields• Posets, Hasse Diagrams and Latices• Graph• Trees• Examination Papers• Index

(For MDU)

APPLIED SCIENCE

S.K. KATARIA & SONS170

CONTENTS :• Differential Calculus (Curve Tracing)• Curvature• Partial Derivatives• Applications of Partial Differentiation• Errors and Increments, Rate Measures

(Applications of Partial Differentiation)• Maxima and Minima (Applications of

Partial Differentiation)• Applications of Integral Calculus• Analytical Solid Geometry• Multiple Integrals and Their Applications

A TEXTBOOK OFAPPLIED

MATHEMATICS-I

By: Dr. J.S. Bindra

• Vector Calculus And Application ofVector Calculus

• Appendices• Sample Papers• Index

A TEXTBOOK OFAPPLIED

MATHEMATICS-III

CONTENTS :• Fourier Series• Laplace Transforms• Special Functions• Partial Differential Equations• Complex Variables• Numerical Solution of Ordinary and

Partial Differential Equations• Linear Systems and Eigen Values• Probability, Probability Distributions,

Sampling, Distribution and Testing ofHypothesisBy: Dr. J.S. Bindra

• Tables• Appendices• Sample Papers• Index

CONTENTS :• Ordinary Differential Equations of First

Order and Applications• Lindear Ordinary Differential Equations

of Second and Higher Order and itsApplications to Electric R-L-C Circuits,Deflection of Beams, Simple HarmonicMotion

• Matrices• Infinite Series• Complex Numbers and Elementary

Functions of Complex Variable

Size : 20 x 30/8Pages : 450 Approx.ISBN : 978-93-5014-217-2

Price Rs. : 265/-Eighth Edition : 2012-13

A TEXTBOOK OFAPPLIED

MATHEMATICS-II

By: Dr. J.S. Bindra

• Sample Papers• Solved Examination Paper• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-80027-18-0

Price Rs. : 325/-Ninth Edition : 2012

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-5014-172-4

81-88458-46-5

Price Rs. : 325/-Reprint : 2012

CONTENTS :• Some Important FormulaeUnit-I: Algebra• Matrices• DeterminantsUnit-II: Differential Calculus• Function and their Limits• Differentiation of Algebraic Functions• Differentiation of Trigonometric and

Inverse Trigonometric Functions• Differential of Logarithmic and

Exponential Functions• Successive Differentiation• Tangents and Normals• Applications of Derivatives• Maxima and Minima

Size : 20 x 30/8Pages : 460 Approx.ISBN : 978-93-80027-20-3

Price Rs. : 230/-Reprint : 2010

APPLIEDMATHEMATICS II

By: Anita Sachdeva

Unit-III: Integral Calculus• Indefinite Integral• Integration by substitution• Integration of Parts• Integration of Rational and

Irrational Functions• Definite Integral• Applications of IntegrationsUnit-IV: Statistics and Probability• Measure of Central Tendency• Measure of Dispersion• ProbabilityUnit-V: Differential Equations• Differential Equations• Previous Year papers• Index

APPLIED SCIENCE

S.K. KATARIA & SONS 171

By: V.P. Mishra

(UPTU)

CONTENTS :Unit-I:• Function of Complex VariableUnit-II:• Statistical Techniques-IUnit-III:• Statistical Techniques-IIUnit-IV:• Numerical Techniques- I

ELEMENTS OFENGINEERING

MATHEMATICS-III

QUESTION BANK INENGINEERINGMATHEMATICS

By: V.P. MishraSize : 20 x 30/8Pages : 850 Approx.ISBN : 978-93-5014-162-5

Price Rs. : 365/-Second Edition : 2011

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-5014-181-6

Price Rs. : 185/-First Edition : 2009

CONTENTS :Unit-I:• First Order Differential Equations and

their Applications• Linear Differential Equations of Higher

Order and their ApplicationsUnit-II:• Series Solution of Different Equations• Bessel's Equation and Bessel Functions• Legendre's Equation, Legendre

Polynomials etc.Unit-III:• Laplace Transformation and its

Applications

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-112-0

Price Rs. : 275/-Third Edition : 2013

ELEMENTS OFENGINEERING

MATHEMATICS-II

By: Dr. V.P. MishraDr. Jyoti Sinha

• Infinite Series – Convergence andDivergence

Unit-IV:• Fourier Series and Harmonic Analysis• First Order Partial Differential Equations• Partial Differential Equations of Higher

Order and ApplicationsUnit-V:• Physical Applications of Second Order

P.D.Es.• Answers and Hints to Exercises• Examination Papers

CONTENTS :Unit-I: Differential Calculus-I• Successive Differentiation, Expansion of

Functions of one Variable• Asymptotes, Curvature and Curve TracingUnit-II: Differential Calculus-II• Partial Differentiation• Expansion of Functions of Several Variables

and Jacobians• Applications of Partial DifferentiationUnit-III: Multiple Integrals• Double Integration and Change of Order

of Integration• Triple Integrals and Applications to Area and

Volume• Beta and Gamma Functions, Dirichlet's

Integral

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-5014-180-9

Price Rs. : 265/-Third Edition : 2012

ELEMENTS OFENGINEERING

MATHEMATICS-I

By: Dr. V.P. MishraDr. Jyoti Sinha

Unit-IV: Vector Calculus• Vector Differentiation• Vector IntegrationUnit-V: Matrices• Matrices-Elementary Operations and Rank

of a Matrix• Linear Dependence of Vectors and

Consistency of Equations• Eigen Values, Eigen Vectors, Diagonalising a

Matrix and Complex Matrix• Short Answer Type Questions• Answers and Hints to Exercises• Examination Papers• Index

(UPTU)

Unit-V:• Numerical Techniques- II• Answers to the Unsolved Problems in

Exercises• Appendix

APPLIED SCIENCE

S.K. KATARIA & SONS172

CONTENTS :• Introduction to Differentiation• Differential Calculus• Introduction to Integration• Integral Calculus• Ordinary Differential Equations• Vector Calculus• Tutorial Sheets• Previous Years Examination Papers• Index

A TEXTBOOK OFENGINEERINGMATHEMATICS

By: Dr. Hari Arora

(Vol. I)

Size : 20 x 30/8Pages : 680 Approx.ISBN : 978-81-89757-71-7

Price Rs. : 325/-Reprint : 2012

CONTENTS :• Linear Algebra• Infinite Series• Complex Numbers• Complex Analysis• Statistics• Probability• Tutorials• Model Test Papers• Examination Papers• Index

A TEXTBOOK OFENGINEERING

MATHEMATICS-II

By: Dr. Hari Arora

(For Amity University)

Size : 20 x 30/8Pages : 550 Approx.ISBN : 81-89757-96-2

Price Rs. : 275/-Reprint : 2013

CONTENTS :• Mathematics I [Semester-I]• Mathematics II [Semester-II]• Mathematics III [Semester-III]• Semester-IV• Numerical Analysis• Answers and Hints to Unsolved

Problems in Exercises• Previous Examinations Question Papers• Index

ADVANCEENGINEERINGMATHEMATICS

Size : 20 x 30/8Pages : 1280ISBN :

Price Rs. : 475/-First Edition : 2013

By: Pratibha MishraRuchi MishraV.P. Mishra

Mohit Mishra

ENGINEERINGMATHEMATICS-III

By: Dr. Hari Arora

Size : 20 x 30/8Pages : 485 Approx.ISBN : 978-81-89757-96-0

Price Rs. : 295/-Reprint : 2012

CONTENTS :Unit-I: Partial Differential Equations• Linear Partial Differential Equations of

Order One• Non-Linear Partial Differential Equations

of Order One• Linear Partial Differential Equations with

Constant CoefficientsUnit-II: Fourier Series• Fourier SeriesUnit-III: Laploce Transformation• Laplace Transforms and Inverse Laplace

Transforms

Unit-IV: Linear Programming• Linear Programming-I: Problem

Formulation and Graphical Method• Linear Programming-II: Simplex Method• Linear Programming-II: Duality and

Dual Simplex Method• Tutorial Sheets• Model Test Papers• Previous Years Examination Papers• Index

(For Amity University (U.P.)

APPLIED SCIENCE

S.K. KATARIA & SONS 173

CONTENTS :• Differential Equations• Series Solution and Special Functions• Laplace Transform• Fourier Series and Partial Differential

Equations• Applications of Partial Differential

Equations• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-80027-42-5

Price Rs. : 250/-First Edition : 2009

ENGINEERINGMATHEMATICS-II

By: Dr. Hari Arora

(For UPTU)

CONTENTS :• Differential Calculus-I• Differential Calculus-II• Matrices• Multiple Integrals• Vector Calculus• Previous Years Examination Papers• Index

Size : 20 x 30/8Pages : 475 Approx.ISBN : 81-89757-23-7

Price Rs. : 250/-First Edition : 2008-09

ENGINEERINGMATHEMATICS

By: Dr. Hari Arora

(Vol. I)(For UPTU)

CONTENTS :• Number System• Polynomials• Coordinate Geometry• Lines and Angles• Congruent Triangles• Introduction to Euclid’s Geometry• Heron’s Formula• SA-I Full Course Test

MATHEMATICS

Size : 20 x 26/8Pages : 500 Approx.ISBN : 978-93-5014-264-6

Price Rs. : 200/-First Edition : 2010

By: Upadhyay & Upadhyay

MATHEMATICS

Size : 20 x 26/8Pages : 975 Approx.ISBN : 978-93-5014-409-1

Price Rs. : 200/-Second Edition : 2013

By: Upadhyay & Upadhyay

CONTENTS :Term-I• Number System• Polynomials• Coordinate Geometry• Lines and Angles• Congruent Triangles• Introduction to Euclid's Geometry• Heron's FormulaTerm-II• Linear Equations in Two Variable• Quadrilaterals

• Areas of Parallelograms and Triangles• Circles• Constructions• Surface Areas and Volumes• Statistics• Probability• Value Based Questions• Full Course Test (SA-I and SA-II)

(Based on Latest CBSE Syllabus and CCE Pattern)Class IX Term I & II

APPLIED SCIENCE

S.K. KATARIA & SONS174

CONTENTS :• Analytical Function• Complex Integration• Power Series with Taylor and Laurent

Series• Singularities and Calculus of Residues• Introduction of Statistics• Skewness, Moments and Kurtosis• Curve Fitting (Method of Least Squares)• Correlation Analysis• Regression Analysis• Probability Theory• Probability Theoretical Distributions• Sampling and Sampling Distributions• Testing of Hypothesis• Chi Square Test

Size : 20 x 30/8Pages : 775 Approx.ISBN : 978-93-80027-91-3

Price Rs. : 325/-First Edition : 2009

ENGINEERINGMATHEMATICS-III

By: Amit Gupta

(Common to All Branches)

• Analysis of Variance (Anova)• Time Series Analysis and Forecasting• Statistical Quality Control• Solution of Algebraic and

Transcendental Equations• Calculus of Finite Differences• Interpolation• Linear Equations• Numerical Differentiation and Integration• Solution of Ordinary Differential

Equations• Model Paper• Self Practice Exercises• Appendix• Index

(For UPTU)

CONTENTS :• Living World• Cell Structure and Function• Metabolic Engineering• Molecular Biology, Economics and

Proteomics• Cell Division• Genetic Engineering• Gene Sequencing• Stem Cells• Human Reproduction• Reproductive Health

Size : 20 x 30/8Pages : 200 Approx.ISBN : 978-93-5014-324-7

Price Rs. : 125/-First Edition : 2012

INTRODUCTION TOBIOSCIENCE

By: Dr. O.N. Pandey

• Microbes• Human Welfare• Tissues in Animals and Plants• Plant Physiology• Plant Growth and Development• Morphology, Anatomy, And Functions of

Different Parts of Flowering Plants• Appendices• Index

CONTENTS :• Introduction to Bioscience-Cell Structure

and Function• Metabolic Engineering• Molecular Biology, Genomics and

Proteomics DNA and RNA: TheMolecular Basis

• Cell Division-Proliferation• Genetic Engineering• Gene Sequencing• Stem CellsSize : 20 x 26/8

Pages : 150 Approx.ISBN : 978-93-5014-061-1

Price Rs. : 115/-First Edition : 2013

INTRODUCTION TOBIOSCIENCE

By: Sweety Israni

• Human Reproduction and ReproductiveHealth

• Productive Health• Model Question Paper• References• Index

(Two Colour Edition)

CONTENTS :• Calculus of Several Variables• Multiple Integrals• Functions of Complex Variable• Vector Calculus• Laplace Transformation• Tutorial Sheets• Examination Papers• Index

ENGINEERINGMATHEMATICS

By: Dr. Hari Arora

(Vol. II)(For GGSIPU)

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-80027-38-8

Price Rs. : 250/-First Edition : 2009

APPLIED SCIENCE

S.K. KATARIA & SONS 175

• Stereo Chemistry• Polymers and Organometallics• Titrimetric Analysis• Objective Type Questions• Experiments• Examination Papers• Index

CONTENTS :• Water Technology• Fuels• The Phase Rule• Electrochemistry• Corrosion and its Control• Chemical Bonding• Solid State• Spectroscopy-I• Spectroscopy-II• Chemical Kinetics• Fundamentals of Organic Mechanism• Name Reactions

COMPREHENSIVEENGINEERING

CHEMISTRY

By: Dr. Sunita Rattan

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-93-80027-87-6

Price Rs. : 275/-Reprint : 2011

EXPERIMENTS INAPPLIED

CHEMISTRY

Size : 20 x 26/8Pages : 400 Approx.ISBN : 81-88458-0-5-8

Price Rs. : 220/-Third Edition : 2012

CONTENTS :• Volumetric Analysis• Water Analysis• Ores and Alloy Analysis• Potentiometry and pH Metric

Measurements• Conductometric Measurements• Colorimetric and Spectrophotometric

Analysis• Thermochemistry• Chemical Kinetics• Surface Tension• Cryoscopy• PolymersBy: Dr. Sunita Rattan

• Phase and Equilibria• Preparations• Analysis of Cool• Lubricants• Chromatoraphy• Adsorption• Appendices

ENGINEERINGCHEMISTRY

Size : 20 x 30/8Pages : 550 Approx.ISBN : 978-93-5014-325-4

Price Rs. : 295/-Third Edition : 2012

CONTENTS :Unit-1: Atoms to Molecules to Materials forEngineers• Chemical Bonding-I• Chemical Bonding-II• Structure and Stereo Structure of MoleculesUnit-II: Characterization and Analysis ofMaterials• Micro and Macro Properties of Molecules• Physical Methods of Purification• Chromatography• Instrumental Methods of Conductivity• Surface Tension, Viscosity and ConductivityUnit-III: Stability and Reactivity of Molecules:Unit Processes• Reactivity of Molecules: Fundamentals of

Organic Mechanism

By: Dr. Sunita Rattan

• Reaction Dynamics Chemical Kinetics• CatalysisUnit-IV: Water and its Treatment• Water and its TreatmentUnit-V: Some Materials of IndustrialImportance• Polymers• Silicones• Metallic-Corrosion and its Control• Electrochemical Cell/Electrolysis• Oils, Fats and Lubricants• Practicals• Index

(For MTU)

CONTENTS :• Water Technology• Fuels• Gaseous State• Thermochemistry• The Phase Rule• Catalysis• Practicals• Question Papers• Index

Size : 20 x 30/8Pages : 500 Approx.ISBN : 978-81-9069-19-1-8

Price Rs. : 295/-Sixth Edition : 2012

ENGINEERINGCHEMISTRY

By: Dr. Sunita Rattan

APPLIED SCIENCE

S.K. KATARIA & SONS176

ENGINEERINGCHEMISTRY

By: Dr. Sunita Rattan

Size : 20 x 30/8Pages : 600 Approx.ISBN : 978-81-906919-1-8

Price Rs. : 285/-Reprint : 2011

CONTENTS :• Water Technology• Fuels• Gaseous State• Thermochemistry• The Phase Rule• Catalysis• Practicals• Question Papers• Index

Size : 20 x 30/8Pages : 475 Approx.ISBN : 978-93-80027-85-2

Price Rs. : 265/-Reprint : 2012

Theory and Practicals ofENGINEERING

CHEMISTRY

By: Dr. Sunita Rattan

CONTENTS :• Water Technology• Fuels• Instrumental Analysis-I• Instrumental Analysis-II• Corrosion and its Control• Lubricants• Experiments• Appendices• Examination Papers• Index

A TEXTBOOK OFENGINEERING

CHEMISTRY

Size : 20 x 30/8Pages : 1235 Approx.ISBN : 978-93-5014-278-3

Price Rs. : 425/-First Edition : 2012

By: Dr. Sunita Rattan

CONTENTS :• Water Technology• Fuels• Chemical Bonding-I• Chemical Bonding-II• Coordination Compounds• Electrochemistry• Corrosion and its Control• Spectroscopic Method of Analysis-I• Spectroscopic Method of Analysis-II• Catalysis• Polymers• Composites• Inorganics Polymers• Chromatography• Lubricants• Ceramic, Cement, Refractories and Glass

• Gaseous State• Thermochemistry• Solutions• The Phase Rule• Chemical Kinetics• Fundamentals of Organic Mechanism• Name Reactions• Stereo Chemistry• Photochemistry• Solid State Chemistry• Liquid Crystals• Organometallics• Transition Elements• Environmental Pollution-I• Environmental Pollution-II• Green Chemistry and its Application• Index

A PRACTICAL TEXTBOOK ONENGINEERING

CHEMISTRY

By: Anupam

Size : 23 x 36/16Pages : 200 Approx.ISBN : 81-88458-23-6

Price Rs. : 85/-First Edition : 2004

CONTENTS :• Basic Concepts• Volumetric Analysis (Titrimetry) of Water

Analysis• Classification of Fuels• Spectrophotometry & Misc. Topics• Chromatography• Polymers• Emergency and First-aid Procedures• Appendix

APPLIED SCIENCE

S.K. KATARIA & SONS 177

Size : 20 x 30/8Pages : 350 Approx.ISBN : 978-93-80027-35-7

Price Rs. : 195/-Third Edition : 2011

ENGINEERINGCHEMISTRY

By: Dr. Renu Gupta

CONTENTS :Unit-I: Chemical Bonding and States ofMatter:• Chemical Bonding• Liquid Crystals• The Solid StateUnit-II: Reaction Kinetics, Phase Ruleand Electrochemistry:• Chemical Kinetics• Phase Rule• ElectrochemistryUnit-III: Structural and MechanisticConcepts of Organics:• Organic Reactions and Their Mechanism

• Stereochemistry of Organic CompoundsUnit-IV: Polymers and Organometallics:• Polymer Chemistry• Organometallic ChemistryUnit-V: Analytical Methods and Fuels:• Spectroscopy• Water Treatment• Fuels• Titrimetric Analysis• Laboratory Practicals• Model Question Papers• Solved Papers• Index

Including Objective

Type Questions

Answers

(For UPTU)

Size : 20 x 30/8Pages : 450 Approx.ISBN : 81-85749-47-7

Price Rs. : 250/-Reprint : 2010

COMPREHENSIVEENGINEERING

CHEMISTRY

By: Dhiraj Sud

CONTENTS :• Water and its Treatment• Corrosion• Chromatography• Electrochemistry• Photochemistry• Molecular Spectroscopy• Magnetic Resonance Spectroscopy• Phase Equilibrium• Experiments• Previous Examination Question Paper• Sample Paper• Index

CONTENTS :• Metallurgy• Corrosion• Fuels• Lubricants• Paints and Varnishes• Refractories• Environmental Pollution and its Control• Polymers, Plastics and Adhesives• Experiments• Examination Papers

APPLIEDCHEMISTRY-II

By: Dr. Raman Rani Mittal

Size : 20 x 30/8Pages : 300 Approx.

Price Rs. : 165/-Second Edition : 2009

APPLIEDCHEMISTRY-I

By: Dr. Raman Rani MittalSize : 20 x 30/8Pages : 400 Approx.

Price Rs. : 195/-Fourth Edition : 2010-11

CONTENTS :Section-A: Theory• Basic Concepts of Chemistry• Atomic Structure• Periodic Table• Chemical Bonding• Water• Gas Law and Thermodynamics• Equilibrium, Acids and Bases• Electrochemistry• Organic Chemistry

Section-B: Practical ChemistrySection-C:• Experiments• Question Papers• Index

APPLIED SCIENCE

S.K. KATARIA & SONS178

NUCLEARSCIENCE

By: Chanchal Garg

CONTENTS :Unit-I:• Chapter-1 : Nucleus and its Basic

FeaturesUnit-II:• Chapter-2 : Nuclear ModelsUnit-III:• Chapter-3 : Nuclear ReactionUnit-IV:• Chapter-4 : Nuclear Decay• Chapter-5 : Nuclear Instruments-I

Unit-V:• Chapter-6 : Nuclear Instruments-II

Accelerators• Chapter-7 : Detectors• Chapter-8 : Applications of Nuclear

Techniques• Examination Papers• Index

Size : 20 x 30/8Pages : 250 Approx.ISBN : 978-93-5014-059-8

Price Rs. : 175/-First Edition : 2010-11

PETROCHEMICALS

By: Anjana Srivastava

CONTENTS :• The Origin of Petroleum• Global Petroleum Resources : A View to

the Future• Composition of Crude Oil• Characteristics of Petroleum Products• Refining of Crude Oil• Cracking (Chemistry)• Petroleum Products• Petrochemicals Industry• Bibliography• Index

Size : 20 x 30/8Pages : 425 Approx.ISBN : 978-81-89757-76-2

Price Rs. : 250/-First Edition : 2013

NEW COURSEENGINEERING

CHEMISTRY

By: Dr. S.K. BhasinPunit Bhardwaj

CONTENTS :Part-I:Section-A• Electrochemistry• Phase RuleSection-B• Water Treatment• Corrosion and its ControlSection-C• Instrumental Methods of Analysis• Fuels and Combustion

(HPTU)

Section-D• Polymers• Composite MaterialsPart-II:• Practicals• ExperimentsPart-III:• Solved Question Paper• Model Question Papers• Index

Size : 20 x 30/8Pages : 225 Approx.

ISBN : 978-93-5014-132-8

Price Rs. : 150/-First Edition : 2011

(For MDU)

Size : 20 x 30/8Pages : 350 Approx.

ISBN : 978-93-4014-280-6

Price Rs. : 225/-Reprint : 2012

NEW COURSEENGINEERING

CHEMISTRY

By: Dr. S.K. Bhasin

CONTENTS :Part-I:• Phase Rule and Catalysis• Water and its Treatment (Part-1)• Water and Treatment (Part-II)• Corrosion and its Prevention• Lubrication and Lubricants• Polymer and Polymerisation• Instrumental Methods of AnalysisPart-II:• Experiments• Index

APPLIED SCIENCE

S.K. KATARIA & SONS 179

FUNDAMENTALS OFPOLYMER

SCIENCE &TECHNOLOGY

By: Anshu SrivastavaEr. Shakun Srivastava

Size : 20 x 26/8Pages : 250 Approx.

ISBN : 978-93-5014-291-2

Price Rs. : 165/-First Edition : 2012

CONTENTS :• Introduction, Nomenclature and

Classification• Chemistry of Polymerization• Kinetics of Polymerization• Co-ordination and Co-polymerization• Molecular Weight of Polymers• Glass Transition Temperature and

Crystallinity of Polymers• Chemical and Geometrical Structure of

Polymer Molecules and Composites• Polymer Processing of High Performance

Polymer• Organic Polymers• High Performance Polymers and Silicon

Polymers or Silicon• Polymer Characterization and Analysis• Elastomers or Rubbers• Thermoplastics and Thermosets or

Thermosetting Resin• Application of Polymers

• Question Bank• Appendix• B.Tech. Papers• Index

REALM OFSPACE

SCIENCE

By: Rajeev Garg

CONTENTS :• Introduction to Space Science• Solar System• The Sun and The Planets• Celestial Mechanics• Stars• Stellar Evolution• White Dwarf• Galaxies• Creation of Universe• Appendix• Model Test Paper• Index

Size : 20 x 30/8Pages : 225 Approx.ISBN : 978-93-5014-051-2

Price Rs. : 150/-Reprint : 2011-12

A Textbook ofNANOSCIENCE

By: Dr. Rakesh KumarDr. Kamlapati Tiwari

Size : 20 x 26/8Pages : 200 Approx.ISBN : 978-93-5014-404-6

Price Rs. : 130/-First Edition : 2013

CONTENTS :• Introductory Nanotechnology and

Physics of Solid State• Quantum Theory and Properties of

Nanoparticles• Growth Techniques of Nanomaterials• Methods of Measuring Properties• Bucky Ball to Robotics• Appendices• Bibliography• Model Questions• Examination Papers• Index

A.M.I.E. BOOKS

S.K. KATARIA & SONS

CONTENTS :• Programming Languages• Body of Program in C• C++• Problem Solving by Computer and Pascal• Information System for Decision Making• Data Management and Database

Management Technology• Office Automation System-LAN, WAN• Email and Electronic Data Interchange

(EDI)• TCP/ IP and Client Server• Information System for Business and

Strategic Management

COMPUTING&

INFORMATICS

By: Vivek SrivastavaM. Ramaswamy

For A.M.I.E. Sec. ‘A’ Students

• Computers and Boolean Algebra• Introduction of Logic Gates and Flip Flop• Components of Computer Hardware• Software• Operating Systems• Appendix• Glossary of Terms• Previous Year Question Paper with

Solution• Index

CONTENTS :Group-A• Structure of Atoms and Molecules• Introduction to Materials• Metals and Alloys• Deformation, Strengthening of Metals

and Failure Analysis• Diffusion in SolidsGroup-B• Heat Treatment• Ceramic Materials• Electrical and Electronic Materials• Magnetic Materials• Polymers, Elastomers and Composites• Thermal Properties

MATERIALSCIENCE &

ENGINEERING

By : R.K. Rajput

For A.M.I.E. Sec. ‘A’ Students

180

Size : 20 x 26/8Pages : 550 Approx.ISBN : 81-88458-86-4

Rs. : 225/-Reprint : 2011

Size : 20 x 30/8Pages : 750 Approx.ISBN : 81-85749-68-X

Rs. : 285/-Reprint : 2012

• Electron Theory of Metals• Short Answer Questions• Objective Type Questions with Answers• Index

CONTENTS :• Basics of Design• Design Concept and its Evaluation• Design for Manufacturing and Assembly• Reliability, Robust Design,

Communicating the Design, DesignChecks, Standardization and Size Ranges

• Casting (Foundry)• Mechanical Working of Metals• Metal Cutting• Basic Machining Operations• Grinding and Surface Finishing Processes• Unconventional Machining Processes• Welding

• Need for Integration• Group Technology, Cellular

Manufacturing and FlexibleManufacturing System

• Robotics• Automated Guided Vehicles System• Product and Process Design for

Integration (Concurrent Engineering)• Objective Type Questions• Model Question Papers• Summer 2005 and 2006, Fundamentals

of Design and Manufacturing, ModelQuestion Paper-II

• Index

FUNDAMENTALS OFDESIGN and

MANUFACTURING

By: M. RamaswamyParbin Kumar

Size : 20 x 26/8Pages : 400 Approx.ISBN : 81-85749-17-5

Price Rs. : 165/-First Edition : 2007

For A.M.I.E. Sec. ‘B’ Students

For A.M.I.E. Sec. ‘A’ Students

CONTENTS :Part-I: Society• Societal Structure and Dynamics• Development Processes• Technology AssessmentPart-II: Environment• Ecosystems• Environmental Degradation• Waste Management• Sustainable Development

SOCIETY ANDENVIRONMENT

By: Suresh K. Dhameja

Size : 20 x 26/8Pages : 550 Approx.ISBN : 81-85749-00-0

Price Rs. : 225/-Reprint : 2013

• Environmental Legislation and IssuesPart-III: General Knowledge• General Knowledge• Model Question Papers• Index

OBJECTIVE TYPE BOOKS

S.K. KATARIA & SONS 181

By: J.B. Gupta

CONTENTS :Section-I: Electrical Engineering• DC Basics and Networks and

Electromagnetic Theory• AC Basics and Networks• DC Machines• AC Machines• Electrical Engineering Materials• Electrical Machine Design• Electrical Installation and Wiring• Electrical Power Generation and Economic

Considerations• Transmission and Distribution of Electrical

Power• Switchgear and Protection

Size : 23 x 36/8Pages : 800 Approx.ISBN : 978-81-89757-92-2

Price Rs. : 465/-Reprint : 2013

QUESTION BANK INELECTRICAL

ENGINEERING

• Electrical Energy Utilisation and ElectricTraction

Section-II: Electronics• Electronic Components and Devices• Analog Electronics• Industrial and Power Electronics• Digital ElectronicsSection-III: Measurements, Instrumentationand Control• Electronics and Electrical Measurements

and Instruments• Electrical and Electronic Instrumentation• Control Systems• Model Test Papers

(With More than 16,000 ObjectiveType Questions & Answers)

CONTENTS :Section-I: Electrical Engineering• DC Basics and Networks and

Electromagnetic Theory• AC Basics and Networks• DC Machines• AC Machines• Electrical Engineering Materials• Electrical Machine Design• Electrical Installation and Wiring• Electrical Power Generation and Economic

Considerations• Transmission and Distribution of Electrical

Power• Switchgear and Protection• Electrical Energy Utilization and Electric

Traction

Section-II: Electronics• Electronic Components and Devices• Analog Electronics• Industrial and Power Electronics• Digital Electronics• Microprocessors• Communication SystemSection-III: Measurements, Instrumentationand Control• Electronic and Electrical Measurements and

Instruments• Electrical and Electronic Instrumentation• Control Systems• Model Test Papers• References

AN INTEGRATED COURSE INELECTRICAL

ENGINEERING

By: J.B. Gupta

Size : 23 x 36/8Pages : 1100 Approx.ISBN : 978-93-5014-368-1

Price Rs. : 595/-Fifth Edition : 2013

CONTENTS :• Chemical Technology• Polymer Technology• Chemical Engineering Thermodynamics• Fuels and Combustion• Mechanical Operations• Chemical Reaction Engineering–

Environment and Industrial Pollution• Heat Transfer• Mass Transfer• Fluid Mechanics• Stoichiometry

QUESTION BANK INCHEMICAL

ENGINEERING

By: Vipin K. Mehta

• Process Equipment and Plant Design• Materials of Construction• Polymer Processing• Chemical Hazards and Safety• Process Control and Instrumentation

Size : 23 x 36/16Pages : 750 Approx.ISBN : 81-85749-73-6

Price Rs. : 275/-Reprint : 2012

(With More than 15,000 ObjectiveType Questions & Answers)

INTEGRATED COURSE INELECTRONICS &

COMMUNICATIONENGINEERING

Size : 23 x 36/8Pages : 600 Approx.ISBN :

Price Rs. : 325/-First Edition : 2013

By : J.B. Gupta

OBJECTIVE TYPE BOOKS

S.K. KATARIA & SONS

Size : 23 x 36/8Pages : 775 Approx.ISBN : 978-93-5014-150-2

81-88458-21-X

Price Rs. : 475/-Sixth Edition : 2012

182

By : D.S. Kumar

CONTENTS :• Engineering Mechanics• Strength of Materials• Theory of Mechanisms and Machines• General Metallurgy and Engineering

Materials• Machine Design• Production Engineering• Industrial Engineering and Product

Management• Measurements and Instrumentation• Basic Thermodynamics• Heat Transfer

MECHANICALENGINEERING

(Objective)

CONTENTS :• Computers-An Introduction• Fundamental of Computers• Digital Electronics• Computer Architecture & Organisation• Data Communications & Networking• Computer Hardware Trends• System Software• Operating Systems• Programming Language and C• Database Management Systems• System & Program Development

Methodology• Management Information Systems• Computer and Information System in

Business

Size : 20 x 30/8Pages : 600 Approx.ISBN : 81-85749-38-8

Price Rs. : 275/-Reprint : 2012

QUESTION BANK INCOMPUTER

SCIENCE

By: Nitin UpadhyayM. Ramaswamy

R. Balagurswamy

• Computer-Aided Designing &Manufacturing

• Artificial Intelligence• Statistical Techniques in

Computer Science• Data Structure• Computer Peripheral Devices• Selection of Computers• Recent Advancements & Future Trends

in Computer Science• Trouble-Shooting of Computers• Mathematical Preliminaries• Exploring C and C++

• Refrigeration and Air-Conditioning• Steam Generation, Engines and

Turbines• IC Engines and Automobiles

Engineering• Compressors, Gas Turbines and Jet

Propulsion• Nuclear Power Plant• Fluid Mechanics and

Hydraulic Machines• Assertion and Reasoning• Practice Papers

QUESTION BANK INELECTRONICS &

COMMUNICATIONENGINEERING

Size : 23 x 36/8Pages : 700 Approx.ISBN :

Price Rs. : 425/-First Edition : 2013 By : J.B. Gupta

CONTENTS :• Electrical and Electronic Materials and

Components• Physical Electronics, Electronic Devices

and ICs• Signals and Systems• Network Theory• Electromagnetic Theory• Electrical and Electronics Instruments• Analog Electronic Circuits• Power Electronics• Digital Electronics

QUESTION BANK INELECTRONICS &

COMMUNICATIONENGINEERING

Size : 23 x 36/8Pages : 700 Approx.ISBN : 978-93-5014-225-7

81-88458-02-3

Price Rs. : 375/-Third Edition : 2012

By : Dr. B.R. GuptaVandana Singhal

(More than 16,000Objective Type Questions with Answers)For Degree, Diploma, AMIE Students &

Other Competitive Examinations

• Control Systems• Microprocessors and Computers• Communication Systems• Microwave Engineering• Model Test Paper (I & II)• Bibliography

OBJECTIVE TYPE BOOKS

S.K. KATARIA & SONS 183

QUESTION BANK INELECTRONICS andCOMMUNICATION

ENGINEERING

Size : 20 x 30/8Pages : 800 Approx.ISBN : 978-93-5014-037-6

Price Rs. : 395/-Second Edition : 2010

for (IES, GATE, BEL, BHEL, SAIL, DRDO,NTPC, NHPC, ISRO, RJET, BSNL, MTNL

EXAMINATIONS)

By: Brijesh VermaM. Balasubramanium

M.V. Raja

• Network Analysis (Answers and Solutions)• Digital Electronics (Answers and Solutions)• Analog Electronics (Answers and Solutions)• Control System (Answers and Solutions)

Full Test Papers• Gate 2008 to 2010 Test Paper (with

Answers and Solutions)• IES 2009 Test Paper (with Answers and

Solutions)• Full Test Paper–1 (Answers and Solutions)• Full Test Paper–2 (Answers and Solutions)• Full Test Paper–3 (Answers and Solutions)• Full Test Paper–4 (Answers and Solutions)

CONTENTS :Unit-I:• Signal and System• Communication Systems• Electromagnetic Theory and Waveguides• Antennas and Wave Propagation• Microwave Engineering• Network Analysis• Digital Electronics• Electronic Materials and Semiconductor

Devices• Analog Electronics• Control Engineering• Electronic Instruments and Measurements• Radio Receivers• Satellite Communication

Test Papers Subject-Wise• Signal & Systems (Questions)

(Answers and Solutions)• Communication Engineering

(Answers and Solutions)• Electromagnetics (Answers and Solutions)

CONTENTS :• Surveying• Building Materials• Building Construction• Estimating and Costing• Strength of Materials• Applied Mechanics

(Including Graphic Statics)• Fluid Mechanics and Hydraulic Machines• Soil Mechanics and Foundation

Engineering• Hydrology and Water Resources

Engineering• Structural Analysis (Theory of Structures)• Design of R.C.C. and Masonry

Structures• Design of Steel Structures• Transportation Engineering (Railway)• Transportation Engineering-II

(Highways, Airways, Harbours)

QUESTION BANK INCIVIL ENGINEERING

By: V.S. MurthyR. Sood

for (ES, CS, GATE, AMIE, SCSE, CTABODIES AND PUBLIC

UNDERTAKING TEST &INTERVIEWS, ADMISSIONS AND

Recruitment TEST)

• Environmental Engineering-I(Water Supply)

• Environmental Engineering-II(Sewerage Treatment and Disposal andAir and Water Pollution and Control)

• Construction Practice, Planning andManagement

• Computer Programming

Size : 20 x 30/8Pages : 1200 Approx.ISBN : 81-85749-39-6

Price Rs. : 395/-Reprint : 2013

J.T.O.JUNIOR TELECOM

OFFICER

By: Sanjay Sharma

Sanjay SharmaSize : 23 x 36/8Pages : 750 Approx.

ISBN :

Price Rs. : 250/-First Edition : 2012

J.T.O.Junior Telecom

Officer(BSNL Recruitment Test)

OBJECTIVE TYPE BOOKS

S.K. KATARIA & SONS184

Size : 23 x 36/8Pages : 1200 Approx.ISBN : 978-93-5014-146-5

Price Rs. : 475/-Reprint : 2013

QUESTION BANK INELECTRONICS &

COMMUNICATIONENGINEERING

By: Sanjay Sharma

CONTENTS :• Chapter-1:

Materials and Components• Chapter-2:

Electronic Devices and Circuits• Chapter-3:

Networks Analysis and Synthesis• Chapter-4:

Electromagnetic Field Theory• Chapter-5:

Electronic Measurements andInstrumentation

• Chapter-6:Power Electronics

• Chapter-7:Analog Electronics

• Chapter-8:Digital Electronics

• Chapter-9:Automatic Control Systems

• Chapter-10:Communication Systems(Analog and Digital)

• Chapter-11:Radio Receivers

• Chapter-12:Microwave Communication

• Chapter-13:Satellite Communication

• Chapter-14:Microprocessors

• Chapter-15:Signals and Systems

• Test Papers• Full Length Tests Papers• Previous Year Papers

185

Size : 20 x 30/8Pages : 1050 Approx.ISBN : 978-93-5014-392-6

81-85749-18-3Price Rs. : 495/-Eighth Edition : 2013

FLUID MECHANICS andFLUID POWER ENGINEERING

CONTENTS :

• Introduction • Physical Properties of Fluids • Fluid Statics • FluidKinematics • Fluid Dynamics (Momentum and Energy Principles)• Dimensional Analysis and Model Similitude • Potential Flow • LaminarViscous Flow • Turbulence and Turbulent Flow through Pipes • Laminarand Turbulent Boundary Layer Flows • Flow around Immersed Bodies:Drag and Lift • Flow in Open Channels • Compressible Flow • FluidMeasurements • Impact of Free Jets • Hydraulic Turbines • HydraulicPumps • Hydraulic Systems • Bibliography • Index

P. S. GILL

Size : 20 x 30/8Pages : 975 Approx.ISBN : 978-93-5014-378-0

81-88458-80-5Price Rs. : 1295/-Second Edition : 2013

CONTENTS :

Part-I: Geometric Dimensioning and Tolerancing • Theory of Co-ordinate Dimensioning • Machining Symbols and Surface Texture • Theoryof Co-ordinate Tolerancing • Introduction to Geometric Dimensioning &Tolerancing • Geometric Tolerancing - Basic Concepts • Datums, DatumTargets & Datum System • Tolerances of Form • Orientation Controls• Profile Tolerances • Tolerances of Location • Runout ControlsPart-II : Tolerance Stacks • Tolerance Stacks

GEOMETRIC DIMENSIONINGand TOLERANCINGP. S. GILL

186

Size : 20 x 30/8Pages : 800 Approx.ISBN : 978-93-5014-405-3

81-88458-06-6Price Rs. : 350/-Ninth Edition : 2013

Dr. K.M. SONI

CONTENTS :

• Introduction • Signal Analysis and Transmission • Amplitude Modulation• Angle Modulation • Probability, Random Signals andRandom Process • Noise • Performance of Communication Systems• Radio Receivers • Sampling Theory and Pulse Modulation • WaveformCoding Techniques • Digital Multiplexers • Digital Data Transmission• Digital Modulation Techniques • Performance Analysis of Digital• Communication Systems • Information Theory • Error Control Coding• Appendices • Model Question Papers for Practice • Index

COMMUNICATION SYSTEMS(ANALOG AND DIGITAL)Dr. SANJAY SHARMA

Size : 20 x 30/8Pages : 1175 Approx.ISBN : 978-93-5014-359-9

81-88458-20-1Price Rs. : 495/-First Edition : 2013

CIRCUITS & SYSTEMS

CONTENTS :

• Introduction • Signals and Waveform Synthesis • Circuit Analysis byClassical Method • Laplace Transform • Circuit Analysis by LaplaceTransform • Graph Theory • Network Theorems • Two-Port Networks• Network Functions and Responses • Network Synthesis • z-Transformsand its Applications • Filter Synthesis • Feedback Amplifiers • Oscillators• Fourier Series • Fourier Transform and its Applications • AnalogousSystems • State Variable Analysis • Magnetically Coupled Circuits• Appendices • Index

OUR BOOKS ARE AVAILABLE WITH FOLLOWING DISTRIBUTORS

187

ANDHRA PRADESH1. Durga Book Distributor # 4-5-172, Ist Floor, Gokul Towers, Behind Gokul Chat,

Hasmath Gunj, Koti, Hyderabad-500095 Tel. : 040-2475280164542801

2. Shah Book House (P) Ltd. 4-3-378/3, Devaka Mahal (Old), Opp. Central Bank,Bank Street, Hyderabad-500 095 Tel. : 040-23445622

040- 23445602

3. Sia Publishers & Distributors Pvt. Ltd. Sia Group, Biyabani Bagh, (Formerly Mahavir Building), Tel. : 040-44999999Door No. 4-1-896/A, Boggulkunta, Near Abids, Fax : 23449928Hyderabad-500001

4. UBS Publishers & Distributor Pvt .Ltd. H.No. 4-1-1058, 3rd Floor, Boggulkunta, Tila Road,Hyderabad, Andhra Pradesh Tel. : 040-24754473

5. Sri Venkateshwara Book Agency Narayana Nayak Complex, Behind Gandhi Gyan Mandir,Kothi, Hyderabad - 500095. Tel. : 040-24757317

6. Central Book Shop D. No. 11-25-103, Main Bazar, Vijaya Wada-520001 Tel. : 0866-2424638Fax : 0866-2421318

7. Sri Rajeswri Book Linkes D. No. 30-6-8, Opp. Premasamajam, Dabagarden,Vishakhapatnam-20 Tel. : 9848036014

8. Paramount Book Distributors #28-8-3, 1st Floor, Opp : Sri Venkateswara Tel. : 0891-6646082Theatre Out Gate, Suryabaugh, Visakhapatnam-02 Tel. : 0891-6639247

9. Sri Venkateswara Book Depot 11-16-32 (C) Singh Raj Wadi Street, Kothapeth, Tel. : 0866-2444156Vijaywada - 520 001

10. Ganesh Book Centre Opp. Uda Office, Lenin Centre, Governorpet, (M) : 09848706623Vijaywada -02 (A.P) 9290968444

11. Jaico Publishing House 3-5-512/75, (364rt) Opp Lane to Raghavendra (M) : 040-27551992Swamy Mutt, Barkatpura, Hyderabad - 500027 (A.P) 09346202158

ASSAM1. UBS Publisher & Distributoes Pvt. Ltd. House No.-4, Kanaklata Path, Lachit Nagar, Bharalupar, Tel. : 9831372912

Guwahati-781 007 0361-246182

2. Unique Books Monjera House, 1st Floor, M.L.N. Road, Pan Bazar, Tel. : 0361-2733723Guwahati-1 (M) : 9864385566

3. Apollo Books & Stationers Opp. H.R.H The P. O.W. Institute, Gar Ali, Tel. : 0376-2350597Jorhat-785 001. (M) : 9864169507

188

BIHAR1. UBS Publisher & Dist. (P) Ltd. Ground Floor, Western Side-Annapurna Complex,

202-Naya Tola, Patna-800 004 Tel. : 0612-2672856Fax : 2686169

2. India Book Centre Ashok Rajpath, Chowhatta, Patna-04 Tel. : 0612-3295213(M) : 09431022986

CHHATTISGARH1. Agrawal Traders & Publishers Satti Bazar, Raipur-492001, Chhattisgarh (M) : 7489991679

0771-2544423

GUJARAT1. UBS Publishers & Distributors Pvt. Ltd. Shop No. 133-134, 1st Floor, Aust Laxmi, Appearl Park,

Outside Dariyapur Gate, Ahmedabad-380016 Tel. : 079-22160371

2. Patel Book Agency Mahavir Samriti Complex, Near Mona Card, Ist Floor, Tel. : 25324741Under Fernandis Bridge, Gandhi Road, Ahmedabad-01 : 09898184248

3. The Book Shop 1 Mahavir Complex, Near ICICI Bank, Tel. : 2588130Kalavad Road, Rajkot

4. Roopal Book Stall Near Sardar Patel Statue, Opp. D-Mart, Tel. : 02692 - 237171Vallabh Vidyanagar-388120, Anand

5. Bulsar Book Store 1-2, Santok Appartment, Opp. Mahavir Appartment, Tel. : 3299494Athwa Gate, Surat-395 001 : 9825146263

6. Mahajan Book Depot Near Central Bank of India, Gandhi Road, Tel. : 91 79 2535 6031Ahmedabad-380 001

GOA1. St. Joseph Books Distributors Rodrigues Residency 117/2, Khornavaddo Patto Ribandar Tel. : 0832-2444851

Panjim, Goa-403006

2. Golden Heart Emporium Confident House, Nr. Head Post Office, Madgaon, Goa

3. Broadway Book Centre 1st Floor, Ashirwad Building, Near Coculo Island, Tel. : 0832-564703718 June Road, Panjim, Goa.

4. Higginbothams Pvt. Ltd. Bits Pilani-Goa Campus, Nh-17b, Bye-Pass, Zuarinagar, Tel. : 0832-6550716Goa-403726

189

HARYANA1. Babu Ram Pradeep Kumar & Co. Railway Road, Rohtak Tel. : 9034425867

2. Manish Traders Add Partap Takiz Road, Pir Ji Mohalla, Tel. : 0126-2268715Main Road, Rohtak : 9812255687

3. Aggarwal Technical Book Shop Opp. Haryana Roadways Cycle Stand & Bus Stand, Tel. : 9896147794Jagadhari, Yamuna Nagar-135003 : 9896076276

4. Goel Technical Book Centre Campas S.J.P ML Inst. of Engg. & Tech. Radaur, Tel. : 9896015510Yamuna Nagar-1352133 : 9813292015

5. Bharat Book Depot Books Market, Ambala Cantt. Tel. : 0171-2643568

6. Garg Book Center Railway Road, Near Bus Stand, Palwal-121102 Tel. : 9896919300: 01275-254300

7. Nirmal Book Agency Opp. University, 3rd Gate, Kurukshetra Tel. : 01744-645745: 9996030938

8. Prism Book Stationers Shop-05 Old Shopping Centre, University Campus, Tel. : 1744-238073Kurukshetra-136119 : 9416039073

9. Naresh Enterprises E-408, S.G.M. Nagar, N.T.I. Faridabad-121001 (HR.) (M) : 9818163665

10. Ritu Book Depot Shop No. LG 12, SCO 35 Shop 16 Market, (M) : 9899915969Near Gold GYM, Faridabad : 9873147969

HIMACHAL PRADESH1. Kharbanda Book General Store Bhojpur, N. H. 21, Sunder Nagar-175002 Tel. : 01907-262462

(M) : 9418000462

2. J. D Traders College Road, Lalit Nagar, Sunder Nagar-174401 (M) : 09418466005

3. Sohail Traders Kanad, Sunder Nagar

4. Goel Book Depot 191/7 Lower Bazar, Shimla (M) : 09418003053

5. Engineering Book Shop Opp. Chinar Hotel, Near Petrol Pump, (M) : 9817701132Sunder Nagar, H. P. 8679339764

6. Bhardwaj Bhandar Bhojpur Bazar, Sunder Nagar-175002 (H.P) Tel. : 01907-262538

JAHRKHAND1. Book Corner Purana Bazar, Rly. Cinema Road, Dhanbad-826 001 Tel. : 0326-2304268

(M) : 9835934963

2. Crown Books Aryan Tower, East Jail Road, Ranchi-834001 Tel. : 0651-2213735(M) : 9431173904

3. Agarwal Book Store J, Road, Pratap Tower, Near Natraj Cinema, Bistupur, Tel. : 065-72439906Jamshedpur-831001 (M) : 9431113974

190

4. Bokaro Students Friend Pvt. Ltd. Bye Pass Road, Chas, Bokaro Steel City, Bokaro Tel. : 06542-234706Fax : 06542-231007

JAMMU & KASHMIR1. Ali Mohammad & Sons 1-Budshah Hotel Building, Lal Chowk, Srinagar, Tel. : 01942-475973

Jammu & Kashmir

2. Charan Dass Sons Opp-G.G.M. Science College, Canal Road, Jammu Tel. : 9419138577

3. Harnam Dass & Brother Agencies Pacca Danga, Jammu. Tel. : 0191-2542175(M) : 09419664141

4. Shah Book Depot Near J & K Bank, SSI Branch, Lal Chowk, Sri Nagar (M) : 9906763627

KARNATAKA1. UBS PubLishers & Dist. (P) Ltd. No.148, 2nd Floor, Cresent, Adjacent To Gopalan Mall, Tel. : 22253903

Mysore Road, Bangalore-560 026 : 22263901

2. Sapna Book House Pvt. Ltd. 3rd Main Road, Gandhi Nagar, Bangalore-560009 Tel. : 080-40114455Fax : 22269648

3. Mahalakshmi Enterprises P. B. No. 5617, No. 66, 6th Main Road 4th Block, Tel. : 23157433Rajaji Nagar, Bangalore-560010 : 26742950

4. Sapna Book House (P) Ltd. 1433, Narayan Shastry Road, Next To Gayatri Bhawan, Tel. : 0821-4004499Devraj Mohalla, Mysore-01

5. Higginbothams (P) Ltd. No. 74, Near Prajavani, M.G. Road, Banglore-560001 Tel. : 080-25597674

6. International Book House Pvt. Ltd. Devantha Manisons, II Floor, 26, W.H. Hanumantappa Road, (M) : 098457296105th Main, Gandhi Nagar, Bangalore, Karnataka

7. Jaico Publishing House (P) Ltd. 14/1, Ist Main Road, 6 Cross, Gandhi Nagar, (M) : 080-22267016 Bangalore-560009, Karnataka

KERALA1. UBS Publishers & Distributor Pvt. Ltd. No. 40/8199 A, 1st Floor, Public Library Building, Tel. : 0484-2353901

Convent Road, Ernakulam-682035 : 0484-2363905

2. TBH Publisher & Distributor Pvt. Ltd. 41/1212, Krishna Swamy Road, Pullepady, Ernakulam-35

3. Aman Book Stall Century Building, New Bus Stand, Kozhikode Tel. : 0495-2721282

4. TBS Publisher & Distributor TBS Building, G.H. Road, Kozhikode-673 001 Tel. : 0495- 2720086

5. Cosmo Book Kiliparambu Temple Lane, Railway Station Link Road, Tel. : 0495-2703487Kozhikode

191

6. Aathira Old & New Books G-31, Stadium Complex, Rajajee Road, Calicut City, Tel. : 0495-4022316Kozhikode-673004

7. Current Books India Pvt. Ltd. Polachirackal Mansion, CMS College Road, Tel. : 0481 - 2560918Kottayam-686001

8. Athulya Books V.K. Complex, Fort Road, Kannur-670001. Tel. : 0497 - 2324099

9. Higginbothams Pvt. Ltd. Higginbotham Building, 25/2389-42 M.G. Road, Trivandrum Tel. : 0471-2331622

10. AA Book Centre Mannil Complex, Opp. L.I.C. Near K.S.R.T.C. Tel. : 0491-3250189Palakkad-14, Kerala : 2527636

11. Saradha Book Centre Near Ganapathi Temple, Pazhavangadi, Fort, Tel. : 0471- 2474670Trivendrum-23

12. R.P. R. Iyer Agencies 403/ Sangeeth Nagar, Thycaud, Trivandrum-695 014 Tel. : 09495968822

13. Aman Book Stall Near Stadium Bus Stand, Palakkad Town, Palakkad-678001 Tel. : 0491-3209007

MAHARASHTRA1. UBS Publisher & Distributors Pvt. Ltd. 5-Wallate Street, 2nd, Floor, Apeejay Chambers, Tel. : 022- 66376922

Fort, Mumbai-400001 Fax : 022-66376921

2. Students Agencies India Pvt. Ltd. 102, Konark Shram, Behind Everest Building, Tel. : 022-4049616156 Tardeo Road, Mumbai-400034 Fax : 40496131

3. Vidyarthi Sales Agencies Shop No. 5 Hendre Mansion, Khotachiwadi 157/159 Tel. : 23829330 J.S.S. Road, Goregaon, Mumbai-400 004

4. Pradeep Book Distributoers Pvt. Ltd. 631-32, Bhudhwar Peth, Shop No. 102/103/104, Tel. : 020-244583331st Floor, Shan Bramha Complex, Pune-411002 (M) : 9326102853

5. UBS Publishers Distributors Pvt. Ltd. 680 Budhwar Peth, Near Appa Balwant Tel. : 020-24461653Chowk (ABC), Pune-411002 : 020-24433976

6. JMD Book & Distributors Ist Floor Lokratna Commerical Complex, Tel. : 0712-2555213Rani Jhansi Square, Sita Buldi, Nagpur-440012

7. LIC Enterprises 7, Krishnaraj Appt., Opp. Saraswat Co-op Bank Ltd., Tel. : 0253-2315357Gole Colony, Nashik-422002 : 9226881986

MADHYA PRADESH1. UBS Publishers Distributors Pvt. Ltd. Z-18, M. P. Nagar, Zone-1, Bhopal-462 011 Tel. : 0755 - 2555285

2. Ajay Publishers & Distributors H No. 6, Behind Moti Masjid, Near Sulemania Tel. : 0755-2542556Girls School, Bhopal-462001 (M) : 09893270574

3. Rajesh Book Centre Sultania Road, Pustak Bazar, Bhopal, (M) : 09893292581(M) : 09755414190

4. Akash Pustak Sadan 156- Naya Bazar, Near Punjab National Bank, Tel. : 0761- 2403099Super Market, Jabalpur Fax : 0761- 2653200

192

5. Arun Prakashan 613, Khajuri Bazar, M.G. Road, Indore-452 002. Tel. : 0731-2454372(M) : 9425313294

6. Agarwal Book Depot NR. Cooks Restaurant, Patankar Bazar, Lashkar, Tel. : 2423575Gwalior-474001 (M) : 09425114561

7. Jain Brothers B/06, Gorai Complex, Ram Mandir, Tel. : 0751-2423694Phalka Bazar, Gwalior-1 (M) : 09301125059

8. Jaico Publishing House 42-A Vyas Complex, Zone-II, M.P. Nagar Tel. : 0755-4229245Bhopal-462011 (M.P.)

9. Saraswathi Book Store Phool Bagh, Near Chaupati Gwalior-474002 Tel. : 0751- 2428864

NEW DELHI1. UBS Publishers & Distributors Pvt. Ltd. 5, Ansari Road, Darya Ganj, New Delhi-110002 Tel. : 011-23273601

Fax : 232765932. UDH Publisher & Distributor Pvt. Ltd. 4762, 63/23, Ansari Road, Darya Ganj, Tel. : 011- 41562623

New Delhi-1100023. New Kewal Book Depot 40, Old Market, Tilak Nagar, New Delhi (M) : 93130972894. Pradeep Agarwal Books Distributor 4099/1st Floor, Nai Sarak, New Delhi (M) : 9810443271

(M) : 9212422143

5. Jain Book Depot Pvt. Ltd. A-135, Karam Pura, New Delhi (M) : 9810991451Tel. : 011- 25415766

6. Mittal Brothers 2/44, Ansari Road, Darya Ganj, New Delhi-110002 Tel. : 011- 23289050

7. Savera Book Distributors-Delhi 4754/23, Akarshan Bhawan, Ansari Road, Darya Ganj, Tel. : 011-23276862New Delhi-110002

8. Lamba Book Depot Shop No. 9, Old Market, Tilak Nagar, New Delhi-110018 (M) : 9871950163(M) : 9810156674

9. Satija Book Depot Shop No. 4, 21st Century Plaza, Sector-8,Near Petrol Pump, Rohini-85 Tel. : 011- 27941152

10. Madan Book Service 873, Nai Sarak, Delhi-6 Tel. : 011- 23266746

11. Batta Books Pvt. Ltd. E-33, Jawahar Park, Laxmi Nagar, Delhi-110 092 Tel. : 011- 43096583(M) : 98181604809

ORISSA1. UBS Publishers & Distributors Pvt. Ltd. 1st Floor, Plot No. 145, Cuttack Road, Tel. : 0674-2314446

Bhubaneshwar-751 006. : 0674- 23144482. A. K. Mishra Agencies Pvt. Ltd. Satyabhama, Roxy Lane, Badambadi, Cuttack-753009 Tel. : 0671-2322244

3. Kitab Mahal Agencies Badambadi, Link Road, Cuttack-753 012 Tel. : 0671-2312585

4. Sri Ram Books 14-Industrial Colony, Unit-Iii, Kharvel Nagar, Tel. : 09439921093Bhubaneswar-1

5. Jacio Publishing House Plot No. 2, Ashok Nagar (East), Unit-2 (M) : 9338553122Bhubaneswar-751009, Orissa

193

PONDICHERRY1. Vinayak Book Palace #45, M.G. Road, (Opp.Perumal Koil), Tel. : 0413-2332336

Pondicherry-605001 (M) : 9894297454

2. Higginbotham Pvt. Ltd. 34, Ambour Salai, Pondicherry H.O. Pondicherry Tel. : 0413-2333836East-605001

PUNJAB1. Lakhanpal Bros. Hall Bazar, Amritsar-Punjab2. Vikas Book Depot Amritsar-Punjab3. Kasturi Lal & Sons Hall Bazar, Amritsar-Punjab

4. Punjab Stationers Gol Dikki, Bhatinda-Punjab5. Agarwal Book Centre Bhatinda6. Bhagwati Book Centre Bhatinda7. Mohindra Book Depot Shop 41, Sector 31 D, Chandigarh Tel : 601550

8. Variety Book Store S. C. O. 69, Sector 17D, Chandigarh-160 017 Tel. : 0172- 2702241

9. Ram Sood Depot Sector 36-D, Chandigarh

10. University Book Depot Sector 17-C, Chandigarh Tel : 2703273

11. Rohhila Book Depot Sector 42, Attawa Stadium Complex, Chandigarh

12. Jogindra Book Depot Sec. 27, SCF, Chandigarh Tel. : 0172- 4623895

13. Computer Shopee Inside SBS College of Engg. Campus, Ferozepur (Pb.)

14. Mithal Book Depot Main Bazar, Faridkot

15. Raj Department Store Behind New Bus Stand, Gurdaspur

16. M.D. Book Seller Vakila Bazar, Hoshiarpur

17. Gupta Book Shop & General Store D.A.V. College, Near Mehar Chand Polytechnic, Jalandhar

18. Jain Book Shop Opp. D.A.V. College, Jalandhar

19. City Book Shop Main Hera Gate, Jalandhar

20. Subhash Book Depot Chowk Adda Tanda, Railwat Road, Jalandhar

KATARIA SONS DISTRIBUTOR FOR PUNJAB

OPP. CLOCK TOWER, LUDHIANA Tel. : 0161-2726401

21. Layal Book Depot Inside-Punjab University, Sector-15, Chandigarh

22. Arora Book Depot Main Bazar, Moga

23. Goel Book Depot Books Market, Patiala (PB)

24. Narula Tech Book Depot Model Town Market, Patiala

25. Harbhajan Book Depot Main Bazar, Ropar

26. Arihant Book Depot Inside Longawal Campus, Sangrur

27. Kiran Book Shop Main Hira Gate, Jalandhar

194

28. Pardeep Book Depot Fathegarh

29. Shivalik Book Centre SCO-61, Sector 17-D, Chandigarh-160017 Tel. : 270476827724768

30. Sohan Lal Madan 21, Municipal Market, Chowk Purani Kotawali Tel. : 2224235,Patiala-147 001 (M) : 09316204512

31. Sethi Publication 8-J (A) Jagdish Colony, Near Gurudwara Nanak Tel. : 0175-2218930Sat Sang, Patiala-147 001

RAJASTHAN1. Ashirwad Publisher & Distbutor B-9 Districe Shoping Centre, Near Laxmi Mandir Tel. : 0141-2741519

Cinema Tonk Road, Jaipur (M) : 982901577

2. India Book House 213 Radha Damodar Kigali, Choura Rasta, Jaipur Tel. : 0141-2311191(M) : 9414079983

3. Raj Pustak Mandir 241, Chaura Rasta, Jaipur-302003 Tel. : 0141-2578098(M) : 09462089401

4. Engg. Book House 1/2 M.P Colony, Mukta Prasad Nagar, Bikaner Tel. : 0151-2252433(M) : 9829087574

5. Second Hand Book Company Jalori Gate, Jodhpur Tel. : 0291-2626797(M) : 9460589979

6. Saraswati & Co. Near Laxmi Narayan Temple, College Road, (M) : 09414115033Bhilwara-311001

7. Vijay Book Depot Near Arya Sawaj Mandir, Manni Ka Bar, Alwar Tel. : 0144-2336106(M) : 9414016405

8. R.K. Stationers Gumanpura, Opp. Jodhpur Sweets, Kota Tel. : 0744-2391911(M) : 9829087574

9. Allied Informatic B-83, Golden Jewel Apartment, Ganesh Marg, Tel. : 2719034Bapu Nagar, Jaipur -15, Rajasthan : 4003870

TAMIL NADU1. UBS Pub. & Distributors Pvt. Ltd. No. 60, Nelson Manickam Road, Aminjikarai, Tel. : 044-23746222

Chennai-600 029

2. TBH Publishers & Distributors Pvt. Ltd. (Laxmi Narain Nivas), 2&3, Nalla Thambi Street, Tel. : 044-28524547Wallajah Road, Chennai-600002

3. Higginbothams Pvt. Ltd. 116, Anna Salai, Chennai-600 002 Tel. : 044-28513519: 044-28522420

4. InternatIonal Book House Pvt. Ltd Old No.12, New No. 23, Damodaran Street,T. Nagar, Chennai Tel. : 044-42070237

5. Sri Eswar Enterprises Archana Arcade, No. 27, Natesan Street, Tel. : 044-2433 9591T. Nagar, Chennai-600 017 : 044-24345902

6. TBH Publishers & Distributors Pvt. Ltd. 88, N.G Narayanasamy Street, Tel. : 0422-2520491New Siddhapdur, Coimbatore-641044 Fax : 0422-4388587

195

7. Higginbothams Pvt. Ltd. 192, Big Bazar Street, Town Hall, Coimbatore- 641001 Tel. : 0422-2390431

8. UBS Publishers & Distributors Pvt. Ltd. 2nd & 2rd Floor, Sri Guru Towers, No. 1-7 Sathy Road, Tel. : 0422-2499917Cross III, Gandhipuram, Coimbatore - 641002

9. Higginbothams Pvt. Ltd. 25 Nandhi Koil Street, Teppakkulam, Tel. : 0431-2704418Triuchirapalli-620 002

10. International Book House Pvt. Ltd. 23 Nandhi Koil Street, Teppakulam, Trichy-2

11. Book Zilla 5/241F, Ratana Arcade, Five Roads, Salem-636 004 Tel. : 0427-2330680Tel. : 0427- 2331980

12. Sri Mariyamman Stores 439-Main Bazar, Virudhu Nagar-626 001 Tel. : 04562-245417

13. Amman Book Gallery Opp. to Govt. Girls Hr. Sec. School, Sankagiri Road, Tel. : 04288-257666Near New Bus Stand, Tiruchengode-637211

14. Higginbotham Pvt. Ltd. 21, Near Sakthisivam Theatre, Goods Shed Street, Tel. : 0425-2340528Madurai H.O-625001

15. Higginbothams Pvt. Ltd. 261/3, Tiruchendur Road, Palayamkottai, Tel. : 0462-2574801Tirunelveli-627002

16. Baskar Book House ‘B’ No. 13, Lily Pond Complex, Moore Market, Tel. : 044-25386333Chennai-600003

17. Deepthi Book World No: 2, St. Joseph’s Convent Shopping Complex, Tel. : 04652 - 229788Cape Road, Nagercoil-1

18. Jaico Publishing House No. 48, (Old No. 73) Arya Gowder Raod Tel. : 044-24803091West Mambalam, Chennai-3

UTTAR PRADESH1. UBS Publisher’s & Dist. Pvt. Ltd. 9, Ashok Nagar, Near Pratibha Press, G.B. Marg, Tel. : 0522-4025124

Latouche Road, Lucknow-226018

2. National Book Sellers Book Market, Aminabad, Lucknow (M) : 09918225000

3. Vishal Distributors 172/182, Bazar Jhau Lal, Gwynne Road, Tel. : 0522-2612341Aminabad, Lucknow : 09415005435

4. Nav Durga Pustak Mandir 123, Colonelganj, Near Thana Chauraha, Allahabad Tel. : 0532-2460498

5. Deep Book Agencies 22 University Road, Allahabad (M) : 9415237813

6. National Book Distributors Shop No. 20, 21,22, Islamia Building, Buxipur, Tel. : 0551-2339533Gorakhpur-273001 (M) : 9935950858

7. Vidyarthy Pustak Mandir Jubilee Chowk, Buxipur, Gorakhpur Tel. : 09918002895

8. Purvanchal Book Depot Near T. D. College Main Gate, Jaunpur. Tel. : 05452-4360888

9. Bhatia Stationers & Book Seller 40/22, Book Market, Pared, Kanpur-208001. Tel. : 0512-2362284

196

10. Concepts Book Sellers 243-B Avadhpuri Road, Lakhanpur, Kanpur-208024 Tel. : 0512-2682783

11. A.R. Enterprises F 25 to 29 Chetan Medical Complex, (M) : 983709092R.G. Inter College Road, Chippi Tank, Meerut-1 : 9897201402

12. Savera Book Distributor 88-G Gandhi Ashram Chowk, Garh Road, Meerut Tel. : 270063

13. Manav BooK Distributors Sita Ram Plaza Market, Near Bharat Cinema, (M) : 9219539082Raja Mandi, Agra Tel. : 22855513

14. Govind Book Agency Sita Ram Plaza Market, Near Bharat Cinema, Tel. : 0562-2854577Raja Mandi, Agra-282 002

15. Y. K. Publishers G-19, Block No. 77, Op. St. Patrick’s Junior College, Tel. : 0562-4033321Sanjay Nagar, Agra-282 002

16. Chaudhry Book Centre Opp. BSA Engg. College, Delhi Mathura Highway, Tel. : 2412778Mathura

17. The English Book & Stationery Depot 347-Sadar Bazar, Jhansi-284001 Tel. : 0510-2470075

18. Jain Book Agency II, Jagat Farms Complex, Gamma Sectore Market, (M) : 9818343655NR. OBC Bank, Greater Noida. : 98911491148

19. Prime Book Shop Jagat Faram, Opp. A. P. J. Inst., Greater Noida-201301 Tel. : 0120-2538891(M) : 9891162501

20. Jagdamba Book Distributor Opp. Sushila College, Ghaziabad Tel. : 0120-4119583

21. Balaji Book Depot Opp. Sushila College, Ghaziabad Tel. : 0120-2756063

22. College Book Store Bazaria, Railway Road, Ghaziabad M) : 9999992143

23. Vimal Book House A.M.U Market, Aligarh-202002 Tel. : 2704991

24. Jagrati Book Center Achal Tal, Aligarh (M) : 9837171518: 9412567565

25. Delta Book Depot Atta Market, Sec-27, Near Metro Station, Noida (M) : 9818189817

26. Royal Book Depot Chowdhri Mahindra, Pradhan Market, Opp. Bakson (M) : 0120-3257787Homeopathic Medcial College, Greater Nodia : 935089278

27. Sri Balaji Book Depot Mahindra Pradhan Market, Tugal Pur, Greater Noida, (M) : 9999677753Noida-201308

28. Jaico Publishing House Hotel D/D International (Basement), Tel. : 0522-4071613196, Gautam Budh Marg, Bans Mandi Crossing : 0522-4010788Lucknow-226018 (U.P.)

UTTARAKHAND1. Indira Book Emporium Agarwal Market, Civil Lines, Roorkee Tel. : 01332-276105

2. Amar Book Depot 38, Moti Bazar, Dehradun-248001 Tel. : 0135-2711943(M) : 9758046347

3. Ramesh Book Depot Moti Bazar,Books Market, Opp. Kotwali, Tel. : 0135-2653637Dehradun-248001

4. Jogendra Book Depot Aggarwal Market, Civil Line, Roorkee Tel. : 01332-273283(M) : 9897138483

5. P. Kumar Book Seller Karkhana Bazar, Nanital, Haldwani Tel. : 05946-250581(M) : 9997933893

6. Jeet Book Seller Old Railway Road, Near Hanuman Mandir,Roorkee-247667 Tel. : 01332264584

WEST BENGAL1. UBS Publisher & Dist. Pvt. Ltd. 8/1-B, Chowringhee Lane, Post Bag No. 9050, Tel. : 033-22521821

Kolkata-700016

2. Techno World 90/6-A, M. Road, Ist Floor, College Street, (M) : 9231623109YMCA Building, Kolkata-07 : 9331996116

3. Bengal Book Agency 1 Shyam Charan Dev Street, Kolkata-700 073 Tel. : 033-22419561: 033-22412195

4. Vinay Book Agency New Kamala Market, Ramdhari Mode,G.C. Mitra Road, Asansol-713 301. Tel. : 0341 6453301

5. Katha .O. Kahani (Book Seller) Pvt. Ltd. 17-Keshab Chand, Sen Street, Kolkata-700009 Tel. : 033-22196313

6. Milani Book Seller 20-Steel Market, Durgapur-4 Tel. : 0343-2572216

7. Binapani Book House Ravindra Avenue, Malda College Gate Tel. : 91-3521-220181Malda-732101, West Bencal : 91-09434057566

197

REFRIGERATION &AIR-CONDITIONINGR. K. RAJPUT

CONTENTS :

• Basic Concepts and Definitions • Temperature and Zeroth Law ofThermodynamics • Transient Energies : Work and Heat • Ideal and RealGases • Mixture of Gases • First Law of Thermodynamics • Steady FlowEnergy Equation (Flow Process and 1st Law) • Second Law ofThermodynamics • Entropy • Availabil ity and Irreversibil ity• Thermodynamic Relations • Gas Power Cycles • Steam and its Properties• Steam Boilers, Mountings and Accessories • Boiler Draught and BoilerPerformance • Vapour Power Cycles • Steam Engines • Flow throughNozzles • Compressed Air : Positive Displacement and DynamicCompressors • Internal Combustion Engines • Gas Turbines and JetPropulsion • Fuels and Combustion • Refrigeration Systems andPsychrometry • Heat Transfer • Index

Size : 20 x 30/8Pages : 1000 Approx.ISBN : 978-93-5014-273-8Price Rs. : 495/-Third Edition : 2012

DR. D.S. KUMAR

ENGINEERING THERMODYNAMICS(Principles & Practices)

198

CONTENTS :

Part-1: Refrigeration • Fundamentals of Refrigeration • Air-refrigeration Cycles and Systems• Simple Vapour Compression Refrigeration System • Vapour Compression RefrigerationSystems with Multiple Evaporators and Compressor • Vapour Absorption RefrigerationSystems • Steam Jet Refrigeration System • Low Temperature Refrigeration (Cryogenics)• Non-Conventional Refrigeration Systems • Refrigerants, Driers and Lubricants• Refrigeration, Components and Controls • Defrosting Methods

Part-II: Air-conditioning • Psychrometrics • Human Comfort • Air-Conditioning Systems• Air-Conditioning Equipment, Components and Controls • Duct and Air-distributionSystems • Fans • Load Estimation • Measuring Instruments–Air-Conditioning

Part-III: Miscellaney • Thermal Insulation • Applications of Refrigeration and Air-Conditioning• Maintenance and Repair of Commercial and Domestic Equipment • Refrigeration andAir-Conditioning Tools • Universities Questions (Latest) with “Solution” • Additional ObjectiveType Questions (with Answers and Solutions-Comments) • Appendices • Refrigerationand Air-conditioning Tables and Charts (including Psychrometric Chart) • Index

Size : 20 x 30/8Pages : 900 Approx.ISBN : 978-93-5014-255-4

81-88458-40-6Price Rs. : 395/-Third Edition : 2012

A TEXTBOOK OF

187

EXPORT ENQUIRIES

INDIA1. UBS Publishers & 5, Ansari Road, Darya Ganj Tel : 011-23273601

Distributors Ltd. New Delhi-110002, [email protected]

2. Satnam Enterprises 2/9, Ground Floor, Ansari Road, Tel : 011-41563911Daryaganj, New Delhi-110002, India : [email protected]

3. Chowdhary Export House 208, Rattan Jyoti Building Tel : 011-25750801B-4 Rajendera Palce : 011-25755519New Delhi-110008, [email protected]

4. Enkay Books & Infotech 209/IInd Floor, Harisand, 20, Ansari Road Tel : 011-23264996Delhi-110031, India : [email protected]

5. Scientific International (P) Ltd. 4850/24, Ansari Road, Darya Ganj Tel : 011-23287580New Delhi-110002, India [email protected]

6. NCBA Exports Pvt. Ltd. 212, Shahpur Jat, Tel : 011-41752056New Delhi-110049, India : [email protected]

7. Aryan Export Unit of S. Chand & Company Ltd. Tel : 011-236720807361, Ram Nagar, Qutub Road, : 011-23672082New Delhi-110055, [email protected]

8. Academic India Publisher 508. Ratan Jyoti Building Tel : 011-2581218118 Rajendra Place New Delhi, India : [email protected]

PAKISTAN9. Allied Book Company Naqi Market, 75 The Mall, Tel : 36306456

Lahore, Pakistan : [email protected],

188

10. Paramount Books P. Ltd. 152/O, Block 2, P.E.C.H.S. Tel : 92-21-34310030Karachi-75400, Pakistan : [email protected] : 92-21-34310032

BANGLADESH11. Karim International Yasin Bhaban, M. Nazmul Karim Tel : +880-2-9130457

64/1, Monipuri Para, FarmgateTejgaon, Dhaka-1215, [email protected]

SRI LANKA12. Sarasavi Bookshop Pvt. Ltd. 23 Ekanayake, Mawatha, Tel : 0094-11- 2829567

Nugegoda, Sri [email protected]

SINGAPORE13. Kinokuniya Book Stores Singapore Sales Office (SSO) Tel : 65 – 62765558

391b, Orchard Road-13-06/07/08Ngee Ann City Tower [email protected]

UGANDA14. Gustro Ltd. Gustro Book Centre, Kibuga Block-2 Tel : 0414 251467

Kibuga Block-2, : 0414 251468Plot No. 355, Sir Apollo Kaggwa RoadOld Kampala Namirembe,P.O. Box 9997, [email protected]

NIGERIA15. Epp Book Services Nigerial Ltd. 39, Ojuelegba Road, Surulere, Lagos, Tel : 08038075521

Lagos, Nigeria, [email protected] : 08035174949

16. John Bright Book Shop 18, Bale Steet, Ajegunle Apapa, Lagos Tel : [email protected] : 08035807700

189

17. Progressive Bookshop Ltd. S/o Ahmadu Bello, Way By Jos Road Tel : +234 08033752912Kaduna, [email protected]

18. Leedor Bookshop Exquisite Shopping Plaza Tel : 0803827661430-32 Ojuelegba Road, Tejuosho, : 08037113771Surulere, Lagos, [email protected]

JORDAN19. ABC Publishers & Distributors P. O. Box 926026 Tel : 0096264646496

Amman 11190, [email protected]

KENYA20. Text Book Centre Limited P. O. Box-47540-00100 Tel : +25420 310699

Kijabe Street, Nairobi, Kenya : 25420 [email protected] : +25420 2223912

EGYPT21. Dar Al-Fajr For Pub. & Dist. 4, Hashem Al-Ashqar Tel : 00202 26246252

St. El-Nozha Al-JadidahCairo-Egypt,Postal Code: [email protected]

22. The Middle East Readers’ 9, EBAD Ei Rahman Street Tel : 202-22681640Information Center Masaken Sheraton-Third Floor

Heliopolis, PO Box 3007Cairo, Egypt,[email protected],

SOUTH AFRICA23. Academic Bookshop 94 Dahl Street, Tel : 015 – 2970474

Polokwane-0699, South [email protected]

190

ZIMBABWE24. Global Book Centre 127, Mbuya Nehanda St. Cnr Speke Ave Tel : 750768

P.O. Box-568, Harare, Zimbabwe : [email protected]

SAUDI ARABIA25. Al Shegrey Book Store P.O. Box 8833, Tel : 00966566595043

Riyadh 11492Saudi [email protected]

ISRAEL26. Pro Book Ltd. 3, Strauss Str. P. O. Box No. 56055 Tel : 972-3-5257999

Tel Aviv-61560, [email protected]

BAHRAIN

27. Elmia-GCC Bookstores P.O Box-80090, Manama Tel : + 973-17786300Kingdom Of [email protected]