CATS™ II

MOBILE DEVICE TESTER

CATS II is the world’s most powerful measurement tool for wireless charging, off ering peerless accuracy and fl exibility, and is uniquely forward compatible. The Base Station Tester is for compliance testing of base stations and power transmitters.

MOBILE DEVICE TESTER

CATS II is the world’s most powerful measurement tool for wireless charging, off ering peerless accuracy and fl exibility, and is uniquely forward compatible. The Base Station Tester is for compliance testing of base stations and power transmitters.

Compatible with Qi,

Rainbow and Typhoon

standards, as well as

Shared Mode

Certifi ed by the WPC as

the reference test tool

for Qi-enabled power

receivers

Reference Calibrator and

Foreign Object Detection

(FOD) support available

Able to test for both

Extended and Baseline

Power Profi les (EPP and

BPP)

Nimbly adapts to new

standards and

developments

CATS™ II MDT 2

STATE-OF-THE-ART FEATURES

· Powerful, fl exible test tool for thorough and accurate testing of wireless charging functionality

· Ideal for R&D, pre-certifi cation and production control

· Validated by the WPC as the reference test tool for certifying Qi-enabled mobile devices before

market release, including Shared Mode functionality

· Compatible with published nok9 standards: Rainbow and Typhoon

· Forward compatible: designed to adapt to new standards and developments

· All coils individually measured and tuned to meet the latest standard specifi cations and maximize

measurement accuracy

· iTT coil for testing with the Rainbow standard

· High quality, colour-coded 5-pin gold plated XLR connectors

· Includes TPT#1 (A1) reference measurement coil

· Built-in oscilloscope eliminates the need for additional instruments

· Two interfaces, Advanced Mode and Simple Mode, support wide range of testing possibilities

Schematic diagram of CATS II testing system using the Automatic Mode interface, which supports touchscreen operation.

CATS II TESTING SYSTEM

CATS II Test Unit TPT#MP1 CPR#1

Reference Qi Power Calibrator

Coil

*Apple is a trademark of Apple Inc. Its usage in this document is without authorization by Apple Inc.

As the only test tools validated and certifi ed by the WPC, CATS I and CATS II off er the very best technology in wireless charging test systems and set the standard for the industry.

CATS II is engineered to deliver highly accurate, reliable results, and primed for the fl exibility demanded by the fast-growing fi eld of wireless charging. It is designed for compliance testing of wireless power devices with Extended Power Profi les (EPP) up to 31.5W, yet has the capability to test Baseline Power Profi les (BPP) between 0-5W.

CATS II is compliant with the latest specifi cations for Qi, the world’s leading wireless charging interface, the Shared Mode functionality for Qi, and published nok9 standards Rainbow and Typhoon. Developed through our shared vision with the WPC on the future of wireless charging technology, CATS II is designed to fl exibly adapt to new standard updates and developments.

Its unique forward compatibility, ease of use and industry-leading performance makes CATS II the world’s most powerful test system in the wireless charging category.

Advanced ModeFor thorough product evaluation, suitable for

pre-certification and R&D. CATS I and

CATS II are the only reference test systems

for certification of qi-enabled consumer

products.

· Simulations, Open Loop testing and re-

engineering

· Flexibly customizable parameters

· Advanced troubleshooting

· Built-in oscilloscope

· 13 buffered test outputs (SMB)

Automatic Mode For fast, efficient production testing and fully automated, on-site test

setup. Progress indicators, graphics and touchscreen interface provide

easy access to relevant data that helps you make quick decisions.

· Instant plug-and-play setup

· Automated testing with clear Go/No Go, Pass/Fail

and test progress indicators

· Supports touchscreen operation

· Automatically generate complete test reports

· Automatically save performed test sessions to be

resumed at any time

· Built-in oscilloscope

CATS™ II MDT 3

OPTIONS

CATS POWER CALIBRATOR

Complete your CATS II system with the CATS Power Calibrator. With the only WPC certified reference calibrator you will obtain industry-best accuracy and reliability with maximum traceability.

TPR-THERMALThis Qi-certified accessory connects easily to the CATS II MDT tester for accurate measurement of heat generated in a device during wireless charging. The upgrade includes an 8-channel ThermoMux with USB connector, and uses a convenient graphical user interface to clearly indicate ambient and inside-receiver temperatures, as well as the difference between the two.

TWO SOFTWARE SOLUTIONSFor a full range of wireless charging testing

FOD EXTENSION

The world’s most comprehensivewireless charging test system

The FOD kit empowers your CATS II BST tester to verify the

performance of a wireless power transfer while considering

every aspect of usability. FOD makes it possible to test the

influence of placing foreign objects on or around the power

transfer, reporting the temperature and received power of

each designated foreign object.

This test system is also highly customizable, allowing you to

place up to four foreign objects and even adjust the power

load for each object. Essential for product developers who

make user experience a priority, this upgrade lets you leave

out the guesswork and cover every eventuality.

ISO17025

Calibration Service

Ensure maximum traceability and accuracy for your CATS II testers. Recommended for new test tools, post-upgrade and seasonal maintenance, nok9 offers the only wireless charging calibration service to achieve ISO17025 accreditation, making it the industry’s most precise calibration service.

CATSTM IIMOBILE DEVICE TESTERwith Rainbow coil iTR.

CATS™ II MDT 4

CATS™ II

The only test system compatible with nok9 standards as well as Qi

On top of its industry-best compatibility with Qi, the world’s most widely-recognized wireless charging

standard, CATS II is also compatible with the new Shared Mode functionality which allows a single power

transmitter to charge up to 10 Qi-enabled devices at once. It is also compatible with the latest interface

standards developed by nok9, namely Rainbow and Typhoon.

CATS II MDT now comes equipped with the iTT coil for testing the Rainbow protocol. Certifi ed by the WPC for

Qi and the only test system compatible with our growing range of nok9 Standards, CATS II bears the distinction

of the most powerful testing and diagnostic tools in the wireless powering industry.

Access to the latest nok9 standards specifi cations is available exclusively to subscribers. To learn more about

nok9 standards or to become a subscriber, visit nok9.com/standards or contact sales@nok9.com.

*Apple is a trademark of Apple Inc. Its usage in this document is without authorization by Apple Inc.

For more information on ISO17025 Calibration, FOD Upgrades or TPR-Thermal, send a request for our product sheets through: nok9.com/product-sheets

THE REFERENCE POWER CALIBRATOR

The Reference Power Calibrator optimizes your CATS II tester for improved accuracy and consistency. The nok9 Reference Power Calibrator is the only one certifi ed by the WPC, and is trusted by leading device manufacturers and cutting-edge laboratories around the world. Developed with the same care and quality as other CATS products, this calibrator is the result of years of meticulous validation and verifi cation, as well as close cooperation with the WPC and leading technology manufacturers.

CATS™ II MDT 5

The CATS II MDT built-in oscilloscope displays multiple channels with easily customizable input options

The CATS II MDT Advanced Mode interface offers highly detailed reports for pre-certification and R&D - Main control panel view - ID and Config view - Negotiation view

CATS™ II MDT 6

CATS II MDT, Advanced Mode, Calibration and Power Transfer view

CATS II MDT, Advanced Mode, PID Control view

CATS™ II MDT 7

CATS II MDT, Advanced Mode, Demod. Config view

CATS II MDT, Advanced Mode, Automatic Tests view

CATS™ II MDT 8

CATS II MDT, Advanced Mode, Automatic Tests view

CATS™ II MDT 9

CATS II MDT, Automatic Mode, Oscilloscope view

The CATS II MDT Automatic Mode interface provides quick and easy access to important data with problem reports and complete test reports, optimized for touchscreen operation - Main Menu view

CATS™ II MDT 10

CATS II MDT, Automatic Mode, view of the Testing control panel while a test is in progress

CATS II MDT, Automatic Mode, Report view

CATS™ II MDT 11

Physical Characteristics (Main unit)

· Height: 180 mm

· Length: 410 mm

· Width: 229 mm

· Weight: 9 kg

Electrical Characteristics (Main unit)

· 100-240 Volt AC / 50/60 Hz

· 4 A max (100 V AC)

· 2 A max (240 V AC)

Physical Characteristics (Coil boxes) · Height/Thickness: 12.5 mm

· Length: 150 mm

· Width: 150 mm

· Cable length: 150 mm

Measurement I/O

· RX Coil (XLR Male)

· TP1 Buck Voltage (Scaled 10 V / V) (SMB)

· TP2 Buck Current (Scaled 1 Amp. / V) (SMB)

· TP3 Coil Voltage (Scaled 100 V / V) (SMB)

· TP5 Coil Current (Scaled 5 Amp. / V) (SMB)

· TP9 Supply Current (Scaled 1 Amp. / V) (SMB)

· TP10 Supply Voltage (Scaled 10 V / V) (SMB)

· TP8 Half Bridge 1 Switch Node

(Scaled 10 V / V) (SMB)

· TP8b Half Bridge 2 Switch Node

(Scaled 10 V / V) (SMB)

· TP3a Coil Voltage Raw (Scaled 1 V / V) (SMB)

· TP4 Voltage Demodulation (SMB)

· TP6 Phase Demodulation (SMB)

· TP7 Current Demodulation (SMB)

· Trigg Trigger Out (SMB)

Computer I/O

· Keyboard/mouse/monitor/USB/Ethernet

All specifications are subject to change without notice.

TECHNICAL SPECIFICATIONS

Every test tool from nok9 is the product of over 25 years of specialized expertise, and this

continues to grow as we strive to ensure our testing solutions achieve the most reliable

results possible. Each of our test tools are hand-built with the highest quality components

and put through rigorous testing, quality control and calibration before delivery.

nok9 collaborates closely with the Wireless Power Consortium (WPC) as well as a global

network of manufacturers and test labs, allowing us to offer unique and far-ranging technical

support. This also lets us adhere to the most updated qi specifications, design tests based

on your needs, troubleshoot, and provide the latest updates and accessories. We also offer

advanced training to help you use our instruments effectively.

As an active member of the WPC, we contribute our knowledge and experience towards

developing improved Qi specifications, and provide certified testing solutions that drive the

Qi wireless powering technology forward. nok9 test systems are the only test instruments

that are certified by the WPC. Under nok9 standards, nok9 also develops specialized

interface standards towards expanding the possibilities of wireless charging technology.

Published standards developed by nok9 include Rainbow, CE4A Extension and Typhoon.

For more information, visit nok9.com.

WE SET THE STANDARD

TRUSTED BY THE TOP BRANDS

CATS II REFERENCE TESTERS

BASE TESTERS

CATS I REFERENCE TESTERS

EUROPE +46 40 690 49 00 • USA (TN) +1 818 540 3100 • FAR EAST +852 2314 8736 • sales@nok9.com • www.nok9.com

nok9 is a contributing member of the Wireless Power Consortium