7/30/2019 CBX 500 and CBX 3500 Multiservice Switches 4-port
10-100 Mbps Ethernet module datasheet
1/2
4-Port 10/100 Mbps Ethernet Modulefor the CBX 500 and CBX
3500
Multiservice Switches
The 4-Port 10/100 Mbps Ethernet Module provides high-speed
Ethernet access to theCBX 500 and CBX 3500 switches. It also
operates as a standard IP routing interface
when used with the MXOS IP/MPLS Feature Pack. You can use this
module to create
high-speed links to IP, Ethernet CPE or local hosting servers.
With the 4-Port 10/100 Mbps
Ethernet module, you can increase revenue opportunities by
adding generic Internet
services, Internet hosting, and value-added point-to-point IP
services to your existing
network without significant capital investments.
Applications Offer high-speed Ethernet access
Provide Internet access or value-
added point-to-point IP services
Support Internet hosting and dial
server aggregation services
Features
High performance IP forwarding
for CBX 500 and CBX 3500
Multiservice Switches
Local IP forwarding engine (FE)
makes routing decisions for IP
traffic arriving from Ethernet ports
on the same module, from any
ATM port on the switch, or from
any Label Switched Path (LSP) in
the network
Local IP FE on each Ethernet card
for scalable IP forwarding capacity
Benefits Increase revenue opportunities by adding Internet
hosting, Internet
access, and value-added point-to-point IP services to your
existing
network
Extend multiservice options by providing Ethernet connectivity
to Web
servers, remote access concentrators, and routers
Minimize operating costs and simplify network management with
Navis
network management software
Technical Specifications
Description Specifications
1.Protocol Features Supported
IP: TCP; UDP; ICMP; ARP; INARP; Telnet,TFTP, FTP; SNMP, OSPF,
MOSPF; RIP, RIP2;BGP4; Static Routing; Traffic and routefilters; IP
QoS; DVMRP; PIM; IGMP
2.Network Synchronization
External and Internal Stratum 3
3.Operations, Administration and Maintenance
Internal and external loopback
Alarm monitoring
4.Network ManagementManaged by Navis IntegratedNetwork
Management Systems
Performance monitoring throughNavisXtend software
7/30/2019 CBX 500 and CBX 3500 Multiservice Switches 4-port
10-100 Mbps Ethernet module datasheet
2/2
Specifications are subject to change
without notice. Contact your Lucent
representative for information on
availability and upgrades. Lucentreserves the right to change,
modify,
transfer or otherwise revise this
publication without notice.
To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative,
Lucent BusinessPartner or, visit our
Web site at www.lucent.com or
www.lucent.com/solutions/
core_switching.html.
CBX 3500, MXOS and NaxisXtend are
trademarks of Lucent Technologies, Inc.
Copyright 2004
Lucent Technologies Inc.
All rights reserved.
MSS v2.0404
5.MIB support
RFC 1398 Ethernet MIB
RFC 1213 TCP/IP-based Internet MIB
6.Physical Dimensions
Size: 1 in x 16 in x 11 in(2.5 cm x 40.6 cm x 27.9 cm)
Weight: 2 lb (.91 kg)
7.Power
Wattage: 90-91 watts
8.Environmental
Temperature range: 0 50 C (32 - 122 F)
9.Regulatory Compliance:
Environmental/NEBS: GR-63-CORE
GR-1089-CORE
Agency approvals, emissions,
and immunity certifications: EN55022 Class A (CISPR)EN50082
FCC Part 15 Class A
10.Interfaces
Physical Connector: Four RJ45-8 connectors(two-pair, category 5
UTP), or
Four Media Independent Interface(MII) connectors
Interface Standards: 802.3 compliant 100Base-TX(10 Mbps and 100
Mbps operation)
Full- or half-duplex
Auto-negotiation for 10 or 100 Mbpsrate full- or half-duplex
Throughput: 540K pps/module (128 byte packets)
4-Port 10/100 Mbps Ethernet Modulefor the CBX 500 and CBX
3500
Multiservice SwitchesTechnical Specifications
(continued)Description Specifications
