Upload
others
View
16
Download
0
Embed Size (px)
Citation preview
Midea VRF Controller
Wired controller
Remote controller
01 / Individual control
02 / Centralized control
03 / Network control
04 / Accessories
Midea VRF Controllers
6
Available for all the indoor units
RM05 RM02/E R51/E R06/E
Individual Controller
Wireless Remote Controller
R51
Function: •Mode Selection: Auto, Cool, Dry, Heat, Fan Only •Temp. Setting Range: 17℃ To 30℃ •Daily Timer Setting •Louver Swing •Fan Speed Control: H/M/L/Auto •*Eco operation mode
*The function with the star matches with the corresponding indoor units.
Eco
Feature: •Background light
Wireless Remote Controller
RM05
Function: • New appearance • All basic functions is the same as R51/E
• For V4 plus indoor units, can set indoor units address
*The function with the star matches with the corresponding indoor units.
How to address via RM05
• *Address setting:
1.Pull the cover down , then use a pin press the LOCK button for 5 seconds.
2. Press ON/OFF button one time
3. press up/down button can select the address code
4. then press the FAN mode button can send the address code to indoor unit wireless receiver, and the indoor unit will make a beep sound
5. Press the LOCK button for 5 seconds to exit the address setting mode
*The function with the star matches with the corresponding indoor units.
Feature: •Background-light display, compact dimension
Wireless Remote Controller
RM02
Function: •Mode selection: Auto, Cool, Dry, Heat, Fan only • Temp. setting range: 17 ℃ to 30 ℃
• Eco operating mode
• One-key 26 ℃
• Keyboard locking
• Address setting( FAN SPEED+ECO for 5s)
• *FOLLOW ME
• **VR4+ auto mode
* Point the RM02 to the IDU to carry on the FOLLOW ME function. **The function with the double star matches with the corresponding indoor units.
Brief Conclusion: Function RM02 RM05 R51 R06
Time display × √ × ×
Controller lock √ √ √ √
Eco operation √ √ √ ×
Swing function √ √ √ √
Background-light √ √ √ √
Daily timer × × √ √
Address setting √ √ × ×
FOLLOW ME √ × × ×
Fan speed control √ √ √ √
Mode selection √ √ √ √
Brief conclusion
KJR-10B/KJR-12B KJR-90A/ 90A1 Wired Controller
• All basic function as the same as wireless remote controller R51
• Add a temperature sensor built-in and used for check ambient temp. of itself . Detect the actual room temp around you then change the operating mode
• FOLLOW ME
KJR-12B
Wired Controller
Wired Controller
KJR-90A/E
Feature: • All basic function as the same as KJR-10B
• Small size and Easy for installation
• The size is: 90*86*13 mm
• Can be put into electric cabinet
• Exquisite appearance and LCD display function
• Nine function buttons
• Applicable for all kinds of indoor units.
98
90
Wired Controller
KJR-90A1/E
Feature: • Without mode select function
• Cooling only controller
1) Only can select ON/OFF, Temp, Swing, and Timer
2) Avoid mode conflict
• Other functions are the same with KJR-90A/E
Without Mode Selection
Wired Controller
KJR-120A/B-E
Feature: • All basic function as the same as KJR-10B
• Real time display
• Check indoor unit status
• 10℃ heat function
• Cool-only or heat-only mode selection
• Auto mode for the VR4+ units
• Auto restart
• Filter cleaning reminder
Wiring diagram
Wired Controller
KJR-86
Feature: • All basic control function
• One key 26℃
• Mode button hidden, avoid mode conflict
• Auto restart
• Press UP and DOWN button to select the mode
Wired Controller
KJR-29B
Feature: • All basic control function
• One key 26℃
• Filter cleaning reminder
• Auto restart
• Wireless signal receiver
• Address setting
How to address via KJR-29B
*Address setting:
1. Press UP and DOWN buttons together for 8 seconds
2. Press ON/OFF button one time
3. press UP/DOWN button can select the address number
4. Then press the MODE button can send the address code to indoor unit wireless receiver, and the indoor unit will make a beep sound
2. Press the OK button to exit the address setting
*The function with the star matches with the corresponding indoor units.
Wired Controller
KJR-29A KJR-29B
Function KJR-10B
KJR-12B
KJR-90A
KJR-90A1
KJR-120A
KJR-29 KJR-86
Time display × √ × × √ √ ×
Controller lock √ √ × × √ √ ×
Eco operation √ √ × × √ × ×
Swing function √ √ √ √ √ √ ×
Error code display
× × × × √ × ×
Background light
× √ × × √ √ √
Daily timer √ × √ √ √ × ×
FOLLOW ME × √ × × × × ×
Fan speed control
√ √ √ √ √ √ √
Mode selection √ √ √ × √ √ ×
Brief Conclusion
CCM03 Feature: • Memory function: It can record the running parameters (mode/fan speed/temp.) when using the controller to turn on the indoor units, all the unit will work as the last setting.
• Automatically record all setting info when lose power
• RS485 communication
• Clear & bright LCD display screen,
• background light, more parameters display
• Emergency ON/OFF control with simple dry contact input
Centralized Controller
Centralized Controller
Under side outlet
Old
• New structure doesn’t need to be embedded into the wall
• Shape is a regular cuboid , installation and put more convenient
• The wiring terminal is located in the control box body , improve the safety and reliability
X, Y, E (Connect to indoor units)
F1, F2, E (Connect to CCM03 or PC)
220V/AC
Emergency stop
Forced on
Address code: 0 ~ F
Terminals are at the back of CCM03.
Centralized Controller
Centralized Controller
LOCK (Mode lock, lock remote controller, lock the Keyboard
query the info of each IDU
Set the mode
UP, DOWN, LEFT, and RIGHT TIMING ON/OFF
Fan Speed Vary
Operation Mode setting
Increase / Decrease the setting temp. when SET Scroll pages of parameters when QUERY
Disable or Enable Swing Fan Re- search all indoor units, and back the default setting
Lock RC
1
LOCK (Mode lock, lock remote controller, lock the Keyboard
query the info of each IDU
Set the mode
UP, DOWN, LEFT, and RIGHT TIMING ON/OFF
Fan Speed Vary
Operation Mode setting
Increase / Decrease the setting temp. when SET Scroll pages of parameters when QUERY
Disable or Enable Swing Fan Re- search all indoor units, and back the default setting
Lock mode
1 2
LOCK (Mode lock, lock remote controller, lock the Keyboard
query the info of each IDU
Set the mode
UP, DOWN, LEFT, and RIGHT TIMING ON/OFF
Fan Speed Vary
Operation Mode setting
Increase / Decrease the setting temp. when SET Scroll pages of parameters when QUERY
Disable or Enable Swing Fan Re- search all indoor units, and back the default setting
Lock keyboard
1 2
X,Y, E
X,Y, E
X,Y, E X,Y, E X,Y, E
F1,F2, E F1,F2, E F1,F2, E
CCM03 wiring diagram
When one CCM03 connect to one refrigerant system, we can:
1.For the V4+ series product, we can make the wiring simply as this.
2.For other product, we can use the traditional wiring diagram to connect all the indoor units.
To connect the indoor ccm controller via X Y E port of master outdoor unit of every refrigerant system. However, the address of every indoor unit must be set by remote controller one by one from0-63, and notice that the address can not be repeated. And notice that the 3 of switch S6 should be set ON, defining the mode is no automatic searching address.
When one CCM03 controller connecting more than one refrigerant system, We can:
CCM09
Feature: • 7-days Weekly schedule setting
• Max. 64 indoor units group control or individual
setting
• Clear and bright screen
• with LCD backlight
• Temperature setting
• Wireless remote control restriction
• Sleep and Silent mode
• Mode lock
• Permanent schedule setting storage
• New structure as CCM03
Centralized Controller
Weekly schedule
controller
If the air conditioner is running within the set period of the weekly timer and there is other control device to control the air conditioner, the air-conditioner will run according to the set parameter of the control devices (such as remote controller, line controller and weekly-timer central controller) till to the next set period of the weekly timer. If the set mode of a period is Off, it means the weekly timer function of this period is invalid.
A possible schedule
Communication interface to the fire control system: COM+OFF Emergency Stop Switch; COM+ON Emergency Open Switch
CCM09 Wiring
To power supply
Remote ON/OFF
To indoor unit old
Centralized controller
KJR-90B Feature: • Centralized Control
Short press :
Only turn ON/OFF the last time operated indoor units.
Long press (3 seconds) :
Can Turn ON/OFF all indoor units.
• Operation Mode Selection Switch (Cooling, Heating)
• Overall/mono-control the indoor units
• Sleep function and memory function
25 seconds after operation, system would enter sleep mode, all indicators blink
Press any key to recovery the display.
• Compatible with central control.
Max. 16 units
Control at most 16 indoor units
Indication A1 A2 A3 A4 B1 B2 B3 B4
Network address 0 1 2 3 4 5 6 7
Indication C1 C2 C3 C4 D1 D2 D3 D4
Network address 8 9 10 11 12 13 14 15
Wiring Diagram
KJRF-180A Feature: • NEWLY deigned Indoor CCM, similar like CCM03
• Max. 16 IDUs (including one of them is Heat pump
water heater) group control
• Easier for installation in the wall. Complete cabinet
at the rear
• Suitable for the home comfort
• Multiple kind of indoor units control integrated
inside
• Auto restart
Centralized Controller
NEW deigned Indoor CCM, similar like CCM03, Max. 16 IDUs (including one of them is Heat pump water heater) group control Easier for installation in the wall. Complete cabinet at the rear
KJR-180A
Centralized Controller
KJRF-180A is able to control multiple kinds of product.
Home comfort
KJRF-180A is designed with graceful appearance, especially suitable for the high class environment.
Graceful appearance
Wiring diagram
Centralized controller
CCM02
Feature: • RS485 communication
• Up to 8 systems, max.32 outdoor units can be centralized monitored
• It can display the operating parameters of outdoor units
• It can display the error or protection code of outdoor units
Max. 8 systems
pressing the Address set button repeatedly ,the address will be increased one by one.
When the address is equal MAX.31and you press once more ,the address will restart
from16.
Indicator Display
Indicator lamp will be on when the CCM is power on.
CCM LOCKED
All the other button will not be on controlled anytime when pushing the CCM is locked,
and unlock happens when receiving the lock.
Electric energy consumption query
The Electric energy consumption can be queried through CCM when the outdoor unit
has its ammeter.
Address code: 16 ~ 31
Address setting method
K1,K2,E (Connect to outdoor units)
F1, F2, E (connect to CCM02 or PC)
Terminals are at the back of CCM02 Wiring diagram
Brief Conclusion: Brief conclusion
Functions CCM03 CCM09 KJR-90B KJRF-180A CCM02
Time display × √ × √ ×
Controller lock × × × × ×
Query function √ √ × √ √
Swing function √ √ √ √ ×
Error code display √ √ × √ √
Background-light √ √ √ √ √
Weekly timer setting × √ × × ×
FOLLOW ME × × × × ×
Fan speed control √ √ × √ ×
Mode selection √ √ √ √ ×
Brief conclusion(continued):
Functions CCM03 CCM09 KJR-90B KJRF-180A CCM02
Auto restart √ √ × √ ×
Mode lock √ × × × ×
Access to PC √ × × × √
Max. unit controlled 64 64 16 16 32
Elevator
Fire alarm
Light
Security
Power
Air conditioner
Building Management System Customer requirement: Control every parts of the building together
Compatible with the main BMS systems, such as Johnson Controls, Siemens, Honeywell and Schneider.
BMS control application
Software Gateways
3rd generation network monitoring system
4rd generation network Monitoring system-Intelligent Manager of Midea(IMM)
LonWorks gateway CCM07
Modbus gateway BACnet
gateway CCM08
New LonWorks gateway
Controlnet gateway
Network monitoring and gateway:
Gateway
CCM07
Feature: • Cooperated with network software
• Connect Midea A/C system to BMS system through LonWorks protocol
Available BMS
LonWorks Gateway
Indoor side
Outdoor side BMS gateway
Control system
System sketch
PC
CCM03
CCM03
Max. 64 units
Max. 16 systems
Max. 64 units
X, Y, E
X, Y, E
X, Y, E
X, Y, E
F1,F2,E
F1,F2,E
Indoor side
PC
CCM02
Max. 32 units
Max. 16 systems
Max. 32 units
CCM02
K1, K2, E
K1, K2, E
K1, K2, E
K1, K2, E
F1,F2,E
F1,F2,E
O,A,E O,A,E
O,A,E O,A,E
Outdoor side
If you want to connect A/C system to BMS system (Lonworks with CCM07),
you can select:
Midea Network control software (Necessary);
CCM03 (Necessary);
CCM02(necessary if select central monitor function or electricity charge
calculation);
Electricity meter (necessary if select electricity charge calculation)
CCM07 is used together with the above accessories to realize BMS connection.
Corresponding devices
CCM08 Feature: • BACNET protocol network
• Max connecting 4 group air-conditions(each group can connect Max.64 indoor units or 32 outdoor units) directly
• Web Access Function
Available BMS
BACnet Gateway
Gateway
System sketch
Web access
Operation status
Change settings
CCM08 is used together with the above accessories to realize BMS connection.
If you want to connect A/C system to BMS system (BACnet), you can select:
4 group interface : 4 CCMs (CCM02 or CCM03)
Each group including 64 indoor units or 32 outdoor units
Indoor units 4 × 64 , Limitation:256 Or outdoor units 4 × 32 , Limitation:128
CCM03
*CCM02(necessary if monitoring the ODU
or electricity fee calculation is needed)
*Electricity meter(necessary if the
electricity fee calculation is needed)
*Midea 3rd generation network monitoring
system(compatible with CCM08)
Corresponding devices
Feature: • Bridge the Midea AC system to the Modbus BMS
• Compose a Modbus network of up to 1024 IDU and 64 ODU
• Transfer in the RTU mode
Modbus Gateway
Gateway
Modbus master
System sketch
If you want to connect A/C system to BMS system via the Modbus gate way,
you can select:
CCM03;
CCM02
Corresponding devices
Feature: • Directly bridge the IDU to the LonWorks network
• One gateway bridge up to 64 IDU
• CCM03 is unnecessary
LonWorks Gateway (MD-LonGW64/E)
Gateway
……
X/Y/E
X/Y/E
BMS (LonWorks protocol)
LonWorks bus
……
System sketch
Accessories
Feature: • A smart way to save energy and money.
When the Card Key is in place, the air conditioner is activated.
When the Card Key is removed, the air conditioner switches off, to avoid cooling an unoccupied room and save energy.
• Special design for hotel guest room, working with hotel card system .
• Notice : Suits all wired controller and KJR-10B /12B / 90A wired controllers.
MD-NIM05
Hotel inserting card module
Hotel card-key
Receiver
MD-NIM05 KJR-10/12B
Indoor PCB
Cable 1
Hotel card-key
Accessories
Feature: The infrared sensor is suitable to be used
in hotel, office, conference room,
residence, etc.
When someone into the room, air
conditioning automatic startup, no one
activities will be off. It controls the AC’s
on/off by the infrared that our body has
delivered.
MD-NIM09
Infra-red sensor installation place should be the ceiling or wall with centralized human activities
Function
5-core wire connect to wired controller
Wiring diagram
Accessories
Feature: • Design for outdoor alarm and monitoring
• Access to network monitoring system
• 220V power input
• 220V AC output for the alarm device
ODU alarm module
KJR-32B
Accessories
Feature: • Wired controller inside
• Display panel inside
• Temperature sensor inside
• EXV inside
• Compatible with other brand’s indoor units
• Access to network monitoring system
DX AHU connection kit
DX AHU connection kit
Midea VRF outdoor unit
Midea VRF indoor unit
DX AHU
Connection
◆ Interface to allow other brand’s DX AHU connecting to Midea VRF outdoor
units.
◆ Used with this connection kit, can be allow other brand’s indoor units
connecting to Midea VRF outdoor units.
◆ DX AHU connection kit consist of control part, EXV part, temperature sensors
and wired controller.
Control part
EXV part
Sensors and wires
Wired controller Composition
Accessories
Feature: • It’s used with the fan coil unit that without the E-Box.
• By this control box fan coil can be centralized controlled by a CCM03
• More flexible for the clients to use the FCU.
• Two models: 2-pipe type;4-pipe type.
FCU connection kit
Example
Accessories
Feature: • Calculate outdoor unit Electrical charge
• Notice: one outdoor unit cooperate one digital Kilowatt Hour Meter
• Can be fixed inside the product in our factory
• *Compatible power: 380V-3N~50Hz,
380V-3N~60Hz,
220V-3N~60Hz
* Different type power meters match different power forms.
Digital power meter
• We recommend: CCM03+CCM02+Control Software for whole hotel,
KJR10+NIM05 + (KJR-90A1+KJR90B) for each room
KJR90B for Mode lock & ON/OFF control for individual
room, and KJR-90A1 to change the setting temp.
If required, KWH meter also can be provided.
Applications