15
CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction Materials, LP Rejection of Unacceptable CCDD – Randi Wille – Meyer Material

CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Embed Size (px)

Citation preview

Page 1: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

CCDD Rules and RegulationsTraining Seminar

Load Screening – Josh Quinn – Hanson Material ServiceRandom Inspections – Kelly VanKovering Vulcan Construction Materials, LPRejection of Unacceptable CCDD – Randi Wille – Meyer Material

Page 2: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

CCDD Rules and RegulationsTraining Seminar

Load Screening

Josh Quinn

Hanson Material Service

Page 3: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Load Screening

Every CCDD load must not be accepted unless it passes screening for hydrocarbon contaminants with a PID/FID or other IEPA approved device.

A visual inspection of material should be performed prior to determination of how many samples should be collected for screening.

An olfactory inspection should also be performed to determine if there are any suspicious odors in the load.

Page 4: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Visual Inspection

Page 5: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Use of the Scaffold or Catwalk

Page 6: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Visual Inspection

Page 7: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Load Screening

If there are no distinct changes in color, consistency, or moisture, representative sampling should be performed.

In cases where the material contains various types of soil, a sample should be taken from each type of soil to represent the entire load.

Do not take composite samples from the single load of material.

Page 8: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Representative Sample Collection

Collect a representative sample by inserting a collection device (probe or shovel) into the load.

Place the sample in an area away from any exhaust fumes. If possible, bring the sample inside. Remember that sample must be analyzed where

background was recorded on PID.

Page 9: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Sample Collection

Page 10: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Representative Sampling

Page 11: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

PID Screening

Place the tip of the PID near the edge of the material collected with the sampling device.

Record the peak measurement shown on the PID.

If the PID shows a reading greater than the margin of error, the material could be contaminated and that load should be rejected.

Results must be documented.

Page 12: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

PID Screening

Page 13: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

PID Screening

Page 14: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Documentation of Inspection Results

The documentation for each inspection must included the following: Date and Time of the Inspection Name of the Hauling Company Vehicle Identification Number or License Plate

Number Source of the CCDD Results of Inspection Inspector Name

Page 15: CCDD Rules and Regulations Training Seminar Load Screening – Josh Quinn – Hanson Material Service Random Inspections – Kelly VanKovering Vulcan Construction

Sample Inspection Log

Date Time Name of Trucking Company

Vehicle ID

Number

CCDD Source

Inspection Results

(Accept/Reject)

Inspector Name