Upload
others
View
10
Download
1
Embed Size (px)
Citation preview
CCNP - Routing and Switching
CCNP – Cisco Certified Network Professional. This is the advanced kevel certification program from
Cisco. This is meant for professional who want to gain a deeper understanding of networking
technologies with an emphasis on planning and implementing LANs and WANs. The CCNP program helps
the engineer bring together technologies like routing and switching, security into a comprehensive
whole.
The prerequisite for CCNP is a CCNA. The CCNP program is taught by senior network engineers in a
world class environment with state of the art labs and infrastructure.
Page 2 CCNP – Routing and Switching
www.zoomgroup.com
Implementing Cisco IP Routing (ROUTE)
(Exam :300-101)
Course Outline
1. Network Principles
Identify Cisco Express Forwarding concepts
o FIB
o Adjacency table
Explain general network challenges
o Unicast
o Out-of-order packets
o Asymmetric routing
Describe IP operations
o ICMP Unreachable and Redirects
o IPv4 and IPv6 fragmentation
o TTL
Explain TCP operations
o IPv4 and IPv6 (P)MTU
o MSS
o Latency
o Windowing
o Bandwidth-delay product
o Global synchronization
Describe UDP operations
o Starvation
o Latency
Recognize proposed changes to the network
o Changes to routing protocol parameters
o Migrate parts of the network to IPv6
o Routing protocol migration
Page 3 CCNP – Routing and Switching
www.zoomgroup.com
2. Layer 2 Technologies
Configure and verify PPP
o Authentication (PAP, CHAP)
o PPPoE (client side only)
Explain Frame Relay
o Operations
o Point-to-point
o Multipoint
3. Layer 3 Technologies
Identify, configure, and verify IPv4 addressing and subnetting
o Address types (Unicast, broadcast, multicast, and VLSM)
o ARP
o DHCP relay and server
o DHCP protocol operations
Identify IPv6 addressing and subnetting
o Unicast
o EUI-64
o ND, RS/RA
o Autoconfig (SLAAC)
o DHCP relay and server
o DHCP protocol operations
Configure and verify static routing
Configure and verify default routing
Evaluate routing protocol types
o Distance vector
o Link state
o Path vector
Describe administrative distance
Troubleshoot passive interfaces
Configure and verify VRF lite
Configure and verify filtering with any protocol
Page 4 CCNP – Routing and Switching
www.zoomgroup.com
Configure and verify redistribution between any routing protocols or routing sources
Configure and verify manual and auto summarization with any routing protocol
Configure and verify policy-based routing
Identify suboptimal routing
Explain ROUTE maps
Configure and verify loop prevention mechanisms
o Route tagging and filtering
o Split-horizon
o Route poisoning
Configure and verify RIPv2
Describe RIPng
Describe EIGRP packet types
Configure and verify EIGRP neighbor relationship and authentication
Configure and verify EIGRP stubs
Configure and verify EIGRP load balancing
o Equal cost
o Unequal cost
Describe and optimize EIGRP metrics
Configure and verify EIGRP for IPv6
Describe OSPF packet types
Configure and verify OSPF neighbor relationship and authentication
Configure and verify network types, area types, and router types
o Point-to-point, multipoint, broadcast, nonbroadcast
o LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
o Internal router, backbone router, ABR, ASBR
o Virtual link
Configure and verify OSPF path preference
Configure and verify OSPF operations
Configure and verify OSPF for IPv6
Page 5 CCNP – Routing and Switching
www.zoomgroup.com
Describe, configure, and verify BGP peer relationships and authentication
o Peer group
o Active, passive
o States and timers
Configure and verify eBGP (IPv4 and IPv6 address families)
o eBGP
o 4-byte AS number
o Private AS
Explain BGP attributes and best-path selection
4. VPN Technologies
Configure and verify GRE
Describe DMVPN (single hub)
Describe Easy Virtual Networking (EVN)
5. Infrastructure Security
Describe IOS AAA using local database
Describe device security using IOS AAA with TACACS+ and RADIUS
o AAA with TACACS+ and RADIUS
o Local privilege authorization fallback
Configure and verify device access control
o Lines (VTY, AUX, console)
o Management plane protection
o Password encryption
Configure and verify router security features
o IPv4 access control lists (standard, extended, time-based)
o IPv6 traffic filter
o Unicast reverse path forwarding
6. Infrastructure Services
Configure and verify device management
o Console and VTY
o Telnet, HTTP, HTTPS, SSH, SCP
o (T)FTP
Page 6 CCNP – Routing and Switching
www.zoomgroup.com
Configure and verify SNMP
o v2
o v3
Configure and verify logging
o Local logging, syslog, debugs, conditional debugs
o Timestamps
Configure and verify Network Time Protocol (NTP)
o NTP master, client, version 3, version 4
o NTP authentication
Configure and verify IPv4 and IPv6 DHCP
o DHCP client, IOS DHCP server, DHCP relay
o DHCP options (describe)
Configure and verify IPv4 Network Address Translation (NAT)
o Static NAT, dynamic NAT, PAT
Describe IPv6 NAT
o NAT64
o NPTv6
Describe SLA architecture
Configure and verify IP SLA
o ICMP
Configure and verify tracking objects
o Tracking objects
o Tracking different entities (for example, interfaces, IPSLA results)
Configure and verify Cisco NetFlow
o NetFlow v5, v9
o Local retrieval
o Export (configuration only)
Page 7 CCNP – Routing and Switching
www.zoomgroup.com
Implementing Cisco IP Switched Networks (SWITCH)
(Exam :300-115)
Course Outline
1. Layer 2 Technologies
Configure and verify switch administration
o SDM templates
o Managing MAC address table
o Troubleshoot Err-disable recovery
Configure and verify Layer 2 protocols
o CDP, LLDP
o UDLD
Configure and verify VLANs
o Access ports
o VLAN database
o Normal, extended VLAN, voice VLAN
Configure and verify trunking
o VTPv1, VTPv2, VTPv3, VTP pruning
o dot1Q
o Native VLAN
o Manual pruning
Configure and verify EtherChannels
o LACP, PAgP, manual
o Layer 2, Layer 3
o Load balancing
o EtherChannel misconfiguration guard
Configure and verify spanning tree
o PVST+, RPVST+, MST
o Switch priority, port priority, path cost, STP timers
o PortFast, BPDUguard, BPDUfilter
Page 8 CCNP – Routing and Switching
www.zoomgroup.com
o Loopguard and Rootguard
Configure and verify other LAN switching technologies
o SPAN, RSPAN
Describe chassis virtualization and aggregation technologies
o Stackwise
2. Infrastructure Security
Configure and verify switch security features
o DHCP snooping
o IP Source Guard
o Dynamic ARP inspection
o Port security
o Private VLAN
o Storm control
Describe device security using Cisco IOS AAA with TACACS+ and RADIUS
o AAA with TACACS+ and RADIUS
o Local privilege authorization fallback
3. Infrastructure Services
Configure and verify first-hop redundancy protocols
o HSRP
o VRRP
o GLBP
Page 9 CCNP – Routing and Switching
www.zoomgroup.com
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
(Exam :300-135)
Course Outline
1. Network Principles
Use Cisco IOS troubleshooting tools
o Debug, conditional debug
o Ping and trace route with extended options
Apply troubleshooting methodologies
o Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
o Design and implement valid solutions
o Verify and monitor resolution
2. Layer 2 Technologies
Troubleshoot switch administration
o SDM templates
o Managing MAC address table
o Troubleshoot Err-disable recovery
Troubleshoot Layer 2 protocols
o CDP, LLDP
o UDLD
Troubleshoot VLANs
o Access ports
o VLAN database
o Normal, extended VLAN, voice VLAN
Troubleshoot trunking
o VTPv1, VTPv2, VTPv3, VTP pruning
o dot1Q
o Native VLAN
o Manual pruning
Page 10 CCNP – Routing and Switching
www.zoomgroup.com
Troubleshoot EtherChannels
o LACP, PAgP, manual
o Layer 2, Layer 3
o Load balancing
o EtherChannel misconfiguration guard
Troubleshoot spanning tree
o PVST+, RPVST +, MST
o Switch priority, port priority, path cost, STP timers
o PortFast, BPDUguard, BPDUfilter
o Loopguard, Rootguard
Troubleshoot other LAN switching technologies
o SPAN, RSPAN
Troubleshoot chassis virtualization and aggregation technologies
o Stackwise
3. Layer 3 Technologies
Troubleshoot IPv4 addressing and subnetting
o Address types (Unicast, broadcast, multicast, and VLSM)
o ARP
o DHCP relay and server
o DHCP protocol operations
Troubleshoot IPv6 addressing and subnetting
o Unicast
o EUI-64
o ND, RS/RA
o Autoconfig (SLAAC)
o DHCP relay and server
o DHCP protocol operations
Troubleshoot static routing
Troubleshoot default routing
Troubleshoot administrative distance
Troubleshoot passive interfaces
Page 11 CCNP – Routing and Switching
www.zoomgroup.com
Troubleshoot VRF lite
Troubleshoot filtering with any protocol
Troubleshoot between any routing protocols or routing sources
Troubleshoot manual and autosummarization with any routing protocol
Troubleshoot policy-based routing
Troubleshoot suboptimal routing
Troubleshoot loop prevention mechanisms
o Route tagging, filtering
o Split-horizon
o Route poisoning
Troubleshoot RIPv2
Troubleshoot EIGRP neighbor relationship and authentication
Troubleshoot loop free path selection
o RD, FD, FC, successor, feasible successor
Troubleshoot EIGPR operations
o Stuck in active
Troubleshoot EIGRP stubs
Troubleshoot EIGRP load balancing
o Equal cost
o Unequal cost
Troubleshoot EIGRP metrics
Troubleshoot EIGRP for IPv6
Troubleshoot OSPF neighbor relationship and authentication
Troubleshoot network types, area types, and router types
o Point-to-point, multipoint, broadcast, nonbroadcast
o LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
o Internal router, backbone router, ABR, ASBR
o Virtual link
Troubleshoot OSPF path preference
Troubleshoot OSPF operations
Troubleshoot OSPF for IPv6
Page 12 CCNP – Routing and Switching
www.zoomgroup.com
Troubleshoot BGP peer relationships and authentication
o Peer group
o Active, passive
o States and timers
Troubleshoot eBGP
o eBGP
o 4-byte AS number
o Private AS
4. VPN Technologies
Troubleshoot GRE
5. Infrastructure Security
Troubleshoot IOS AAA using local database
Troubleshoot device access control
o Lines (VTY, AUX, console)
o Management plane protection
o Password encryption
Troubleshoot router security features
o IPv4 access control lists (standard, extended, time-based)
o IPv6 traffic filter
o Unicast reverse path forwarding
6. Infrastructure Services
Troubleshoot device management
o Console and VTY
o Telnet, HTTP, HTTPS, SSH, SCP
o T) FTP
Troubleshoot SNMP
o v2
o v3
Troubleshoot logging
o Local logging, syslog, debugs, conditional debugs
o Timestamps
Page 13 CCNP – Routing and Switching
www.zoomgroup.com
Troubleshoot Network Time Protocol(NTP)
o NTP master, client, version 3, version 4
o NTP authentication
Troubleshoot IPv4 and IPv6 DHCP
o DHCP client, IOS DHCP server, DHCP relay
o DHCP options (describe)
Troubleshoot IPv4 Network Address Translation (NAT)
o Static NAT, Dynamic NAT, PAT
Troubleshoot SLA architecture
Troubleshoot tracking objects
o Tracking objects
o Tracking different entities (for example, interfaces, IPSLA results)