Embed Size (px)
Citation preview
1/7/2014 CCS :: View topic - Problem with fast CRC16
https://www.ccsinfo.com/forum/viewtopic.php?t=35926 1/4
FAQ Forum Help Official CCS Support Search
Register
Profile Log in to check your private messages Login
CCS does not monitor this forum on a regular basis.
Please do not post bug Reports on this forum. Send them [email protected]
Problem with fast CRC16
CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic
Author Message
piripic
Joined: 15 Jan 2008Posts: 25
Problem with fast CRC16
Posted: Mon Sep 08, 2008 2:14 am
Hi,
I am testing the fast CRC16 algorithm, the two functions never return the same result also
initializing the variable MyCRC to 0xFFFF, where I mistake ?
Here my test code:
Code:
#include <18F24K20.h>
#device adc=8
#FUSES NOWDT, HS, NOPROTECT, NOBROWNOUT, NOPUT, NOCPD, STVREN
#FUSES NODEBUG, NOLVP, NOWRT, NOWRTD, IESO, FCMEN, NOPBADEN, WRTC
#FUSES NOWRTB, NOEBTR, NOEBTRB, NOCPB, LPT1OSC, MCLR
#use delay(clock=8000000)
#use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8,errors)
unsigned int16 FSR0;
#locate FSR0 = 0x0FE9
unsigned int8 POSTINC0;
#locate POSTINC0 = 0x0FEE
#define MYDIM 2
int8 MyArray[MYDIM]; // Global Array
int16 crc_1021(int16 old_crc, int8 data)
{
int16 crc;
int16 x;
x = make8(old_crc,1) data; //x = ((old_crc>>8) data) & 0xff;
x = x>>4;
crc = (old_crc << 8) (x << 12) (x <<5) x;
crc &= 0xffff;
return crc;
}
//-----------------------------------------------------------------------------
// Calculate the CRC16 value of a specified buffer.
//
// A very fast CRC-16 routine based on the CCITT polynome 0x1021.
// This implementation is very small and fast. Using some specific features of
// the polynome the resulting code is even faster than table driven algorithms.
//
// Original Code: Ashley Roll www.digitalnemesis.com
// Optimisations: Scott Dattalo www.dattalo.com
//-----------------------------------------------------------------------------
int16 Calc_Crc16(int8 *Buffer, int16 Len) // Note: save 5 instructions by
1/7/2014 CCS :: View topic - Problem with fast CRC16
https://www.ccsinfo.com/forum/viewtopic.php?t=35926 2/4
{ // changing 'int16 Len' to 'int8
Len'.
int8 Index;
union
{
int8 uByte[2];
int16 uWord;
} CRC16;
CRC16.uWord = 0xFFFF; // Initialise CRC to 0xFFFF
FSR0 = Buffer; // Copy Buffer address to pointer register FSR0
do
{
#ASM
movf POSTINC0,w // load w with next databyte
xorwf CRC16.uByte[0],w // (a x):(b y)
movwf Index //
andlw 0xf0 // W = (a x):0
swapf Index,f // Index = (b y):(a x)
xorwf Index,f // Index = (a b x y):(a x) = i2:i1
// High byte
movf Index,W
andlw 0xf0
xorwf CRC16.uByte[1],W
movwf CRC16.uByte[0]
rlcf Index,W // use rlf for PIC16
rlcf Index,W // use rlf for PIC16
xorwf CRC16.uByte[0],f
andlw 0xe0
xorwf CRC16.uByte[0],f
swapf Index,F
xorwf Index,W
movwf CRC16.uByte[1]
#ENDASM
} while (--Len);
return CRC16.uWord;
}
// ********** M A I N P r o g . ***********
void main()
{
int8 i;
int16 MyCRC=0;
for(i=0 ; i<MYDIM ; i++) {
MyArray[i] = i+1; // fill the array
}
//----calc CRC16 By C function-----------------
for(i=0 ; i<MYDIM ; i++) {
MyCRC = crc_1021(MyCRC,MyArray[i]);
}
printf("C CRC16 value is %Lu\n\r", MyCRC); // Send the result (C
function)
//----calc CRC16 by assembly function----------
MyCRC = Calc_Crc16(&MyArray[0],MYDIM);
printf("ASM CRC16 value is %Lu\n\r", MyCRC); // Send the result (assembly
function)
while(1) ;
}
Any ideas ? thanks
Claudio
Last edited by piripic on Mon Sep 08, 2008 6:53 am; edited 1 time in total
1/7/2014 CCS :: View topic - Problem with fast CRC16
https://www.ccsinfo.com/forum/viewtopic.php?t=35926 3/4
piripic
Joined: 15 Jan 2008Posts: 25
resolved
Posted: Mon Sep 08, 2008 6:06 am
Now is ok; this is the working code:
Code:
#include <18F24K20.h>
#device adc=8
#FUSES NOWDT, HS, NOPROTECT, NOBROWNOUT, NOPUT, NOCPD, STVREN
#FUSES NODEBUG, NOLVP, NOWRT, NOWRTD, IESO, FCMEN, NOPBADEN, WRTC
#FUSES NOWRTB, NOEBTR, NOEBTRB, NOCPB, LPT1OSC, MCLR
#use delay(clock=8000000)
#use rs232(baud=9600,parity=N,xmit=PIN_C6,rcv=PIN_C7,bits=8,errors)
unsigned int16 FSR0;
#locate FSR0 = 0x0FE9
unsigned int8 POSTINC0;
#locate POSTINC0 = 0x0FEE
#define MYDIM 64
int8 MyArray[MYDIM]; // Global Array
int16 crc_1021(int16 old_crc, int8 data)
{
int16 crc;
int16 x;
x = make8(old_crc,1) data; //x = ((old_crc>>8) data) & 0xff;
x = x>>4;
crc = (old_crc << 8) (x << 12) (x <<5) x;
crc &= 0xffff;
return crc;
}
//-----------------------------------------------------------------------------
// Calculate the CRC16 value of a specified buffer.
//
// A very fast CRC-16 routine based on the CCITT polynome 0x1021.
// This implementation is very small and fast. Using some specific features of
// the polynome the resulting code is even faster than table driven algorithms.
//
// Original Code: Ashley Roll www.digitalnemesis.com
// Optimisations: Scott Dattalo www.dattalo.com
//-----------------------------------------------------------------------------
int16 Calc_Crc16(int8 *Buffer, int16 Len) // Note: save 5 instructions by
{ // changing 'int16 Len' to 'int8
Len'.
int8 Index;
union
{
int8 uByte[2];
int16 uWord;
} CRC16;
CRC16.uWord = 0xFFFF; // Initialise CRC to 0xFFFF
FSR0 = Buffer; // Copy Buffer address to pointer register FSR0
do
{
#ASM
movf POSTINC0,w // load w with next databyte
xorwf CRC16.uByte[1],w // (a x):(b y)
movwf Index //
andlw 0xf0 // W = (a x):0
swapf Index,f // Index = (b y):(a x)
xorwf Index,f // Index = (a b x y):(a x) = i2:i1
// High byte
movf Index,W
andlw 0xf0
xorwf CRC16.uByte[0],W
movwf CRC16.uByte[1]
rlcf Index,W // use rlf for PIC16
rlcf Index,W // use rlf for PIC16
xorwf CRC16.uByte[1],f
1/7/2014 CCS :: View topic - Problem with fast CRC16
https://www.ccsinfo.com/forum/viewtopic.php?t=35926 4/4
andlw 0xe0
xorwf CRC16.uByte[1],f
swapf Index,F
xorwf Index,W
movwf CRC16.uByte[0]
#ENDASM
} while (--Len);
return CRC16.uWord;
}
// ********** M A I N P r o g . ***********
void main()
{
int8 i;
int16 MyCRC;
for(i=0 ; i<MYDIM ; i++) {
MyArray[i] = i+1; // fill the array
}
//----calc CRC16 By C function-----------------
MyCRC = 0xFFFF;
for(i=0 ; i<MYDIM ; i++) {
MyCRC = crc_1021(MyCRC,MyArray[i]);
}
printf("C CRC16 value is %Lu\n\r", MyCRC); // Send the result (C
function)
//----calc CRC16 by assembly function----------
MyCRC = Calc_Crc16(&MyArray[0],MYDIM);
printf("ASM CRC16 value is %Lu\n\r", MyCRC); // Send the result (assembly
function)
while(1) ;
}
I have inverted the CRC16.uByte index value
Claudio
Display posts from previous: All Posts Oldest First Go
CCS Forum Index -> General CCS C DiscussionAll times are GMT - 6 Hours
Page 1 of 1
Jump to: General CCS C Discussion Go
You cannot post new topics in this forumYou cannot reply to topics in this forum
You cannot edit your posts in this forumYou cannot delete your posts in this forum
You cannot vote in polls in this forum
Powered by phpBB © 2001, 2005 phpBB Group
