THERMASTER Thermostat & Thermal cut-off

Thermaster Electronic (Xiamen) Ltd.5F, 38,Yue Hua Road, Huli industrial district, Xiamen, Fujian, China

Tel: +86 592 6025275 Fax: +86 592 5623726http://www.thermaster.com

ISO9001 Registered Factory

P180Dimensions

Features- consistent temperature vs. angle corelation- low differential- easy mounting- solid construction- good heat transfer to bimetal- customer designed spindles and terminals

SpecificationsRated voltage 250 Vac 120 VacRated current 10A 15ATest class II (100,000 cycles)Maximum temperature 250° C Operating range 0...250° C Tolerance +/-5%Differential 10-25° C Rotating angle 100- 300 degreesTemperature changing speed > 1 K/minDesign Complies to EN 60730Approval VDE UL,JETAdjusting spindle min 10 - max 50 mm

ApplicationEspecially for ovens, grills, table stoves and otherdesigns where the thermostat mounting location isnot sufficient to perform desired control.

FunctionThe current flows through the bimetal when thecontacts close. The combined influence of ambientheat and t he heat from the bimetal itself willactuate the contacts to open. The on-off cycle ratiois a function of the thermostat temperature settingso tat it works as an infinite energy control.

PH180Dimensions

Bimetallic Thermostatwith snap-action contacts

Infinite Energy Controlwith snap-action contacts

SpecificationsRated voltage 250 Vac 120 VacRated current 10A 15ATest class II (100,000 cycles)Maximum temperature 250° C Operating range 0...250° C Tolerance +/-5%Differential 10-25° C Rotating angle 100- 300 degreesTemperature changing speed > 1 K/minDesign Complies to EN 60730Approval VDEAdjusting spindle min 10 - max 50 mm

DT7

SpecificationsRated voltage AC 250V 10A(VDE)Rated current AC 120V 12A(UL)Test class 100,000 cyclesMaximum temperature T 250Operating temperature max. 185° C Tolerance +/-5° CProof tracking index PTI 250Design Complies to EN 60730 UL 873

DT9

ApplicationEspecially for coffee maker, toaster and other designswhere the fixed temperature of a metal surface is to becontrolled.

FunctionThe bimtallic disc snaps as soon as the set temperatureis reached and open the circuit. It snaps back when thetemperature has dropped by the differential controlledby the product design.

Features- Manufactured and inspected by automatedequipments- Reliable ceramics housing- Easy mounting- Solid construction- Compact size

DT7

DT9

Fixed TemperatureBimetallic Thermostat

Dimensions

Dimensions

PP135350

FunctionThe contact opens as soon as the set temperature isreached and closes automatically when the tempearturehas dropped by the differential.

FunctionThe TF2 is equipped with a solder insert placed indirect contact with the sensing plate. Upon reachingthe specified temperature, the solder melts, openingthe electrical contacts. Resetting is impossible.

Features- high holding temperature- no chemical aging risk- Reliable ceramics housing- Easy mounting- Solid construction

SpecificationsRated voltage AC 250V 10A(VDE)Rated current AC 120V 15AMaximum temperature limit 500° CRated functioning temperature 255° C Holding temperature 230° C Tolerance -10° CProof tracking index CTI 250Design Complies to EN 60691

TF2

SpecificationsRated voltage 250 Vac 120 VacRated current 10A 15ATest class II (100,000 cycles)Maximum temperature 250° COperating range 0...250° CTolerance +/-5%Differential 10-25° CRotating angle 100- 300 degreesTemperature changing speed > 1 K/minDesign Complies to EN 60730Approval VDEAdjusting spindle min 10 - max 50 mm

Thermostatwith snap-action contacts

Thermal Cut-Off

Dimensions

Dimensions