–

––

––

–

CHAdeMO 1.0 準拠

Release button （（（（Luminous））））

Grip

LED

Note ：：：：The photograph is a standard color of blue.

Performance Table Insulation resistance 100MΩ or more

Withstand voltage(V/1min) AC3000V

Fitting insertion force Less than 100N

Temperature rise Housing：Less than 20 Terminal：Less than 45

Drop impact It was dropped to concrete floor from 1m on No abnormality

IP code Unmated：IP44 Mated：IP56

Mechanical endurance 10000cycles

Specification Certification body TÜV Rheinland

Certification standards IEC62196-1

CHAdeMO 1.0

Rated voltage D.C.500V

Rated current 125A / 100A / 60A

Ambient temperature -30 ～ 50

Relative humidityre 30 ～ 90％

Specification

Construction

Connector External dimensions L270 × H180 × W81（mm）

Weight 1.1kg（Except cable）

Body Thermoplastic

Contact Contact Tough pitch copper（Surface plating）

Communication Brass（Surface plating）

Latch Stainless

Cable Voltage 600V

Number 2 5 2Ｐ

Conductor

mm2 35 / 25 / 10 0.75 0.75

Diameter() 7.7 / 6.8 / 4.1 1.1 1.1

Tinned annealed copper wire from

Outer diameter(mm) 25.9 / 23.6 / 19.3

Conductor Annealed copper wire

Insulator Cross-linked polyethylene

Sheath Polyurethane

The cores Identification According to FIG

Fujikura Ltd. http://www.fujikura.co.jp/

November 2014 created

CE version Connector with Lead Cable for Fast Charging Station

Easy operationEasy operationEasy operationEasy operation

JuJuJuJust push on to plug in,st push on to plug in,st push on to plug in,st push on to plug in,

Push release Push release Push release Push release buttonbuttonbuttonbutton to unplugto unplugto unplugto unplug

Utilizing Fujikura illumination Utilizing Fujikura illumination Utilizing Fujikura illumination Utilizing Fujikura illumination technologytechnologytechnologytechnology, our 'charging lamp' , our 'charging lamp' , our 'charging lamp' , our 'charging lamp'

makes it easy and clear to see when our connector is charging.makes it easy and clear to see when our connector is charging.makes it easy and clear to see when our connector is charging.makes it easy and clear to see when our connector is charging.

State of latch is clear to see the release button.State of latch is clear to see the release button.State of latch is clear to see the release button.State of latch is clear to see the release button.

Latch and release Latch and release Latch and release Latch and release buttonbuttonbuttonbutton are linked together and move are linked together and move are linked together and move are linked together and move

simultaneously.simultaneously.simultaneously.simultaneously.

Stylish design with your favorite color.Stylish design with your favorite color.Stylish design with your favorite color.Stylish design with your favorite color.

Standard color is blueStandard color is blueStandard color is blueStandard color is blue

Conform to IEC62196Conform to IEC62196Conform to IEC62196Conform to IEC62196----1and CHAdeMo1.0.1and CHAdeMo1.0.1and CHAdeMo1.0.1and CHAdeMo1.0.

including the following functionincluding the following functionincluding the following functionincluding the following function

LatchLatchLatchLatch position detectionposition detectionposition detectionposition detection

Broken inlet detectionBroken inlet detectionBroken inlet detectionBroken inlet detection

Emergency pulling offEmergency pulling offEmergency pulling offEmergency pulling off

Cross-linked polyethylene

Conductor（Control）

Conductor（Power）

Cross-linked polyethylene insulation

Polyurethane sheath