T F W

6 0 4 . 5 4 9 . 9 3 7 9604.549.9555f l u x w e r x . c o m

All rights reserved. © Fluxwerx Illumination Inc 2017

Due to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have limited compatibility with some other product selections. Consult www.fluxwerx.com for most current technical information.

IDC-DRYWALL-SPECDATANov, 2017

PAGE1 of 2

®

Ceiling (D) DRYWALL INTEGRATED MOUNTING Type

Project

Product

Notes

fpo

FEATURES

• integrated driver, suspension and power feed location• frames and drivers can be installed in advance of luminaires• multiple orientations for easy access and installation method• breakaway frame designed for retrofit installation• low profile for shallow depth plenum spaces• adjustable, reversible and removable locking hanger bars• suitable for drywall thicknesses of 0.5" - 0.875" (12 - 22 mm)• integral barriered driver enclosure for line and low voltages• prewired driver with flex whip and integral junction box• supplied with all pushwire and twistwire electrical connectors

CONSTRUCTION

• frame and driver enclosure formed in 22 gauge CRS; satin coat• jbox knockouts for 9/16", 1/2" and 3/4" conduits; rigid or flexible• prewired 120-277V or 347V driver with 2' flexible conduit (installed)

and two 90° elbow connections; #18 gauge solid wire; and all connectors

• 5.50" (140 mm) diameter white injection molded canopy; UV stable• 0.04" (1.0 mm) stainless steel aircraft cable; factory crimped

APPROVALS

• Certified by UL for dry or damp location installation in US and Canada• CCEA approved for Chicago plenum installation

NON-IC RATED – SPACING CRITERIA

• Keep insulation, building members and other driver enclosures at least 3 inches (76mm) away from all sides of the enclosure

• For 8 foot fixture enclosures at 47W per 4 foot, ensure 12 inches (300mm) of clearance from the center of the enclosure on all sides and 3 inches (76mm) from the top surface

OR

Retrofit Installation Method

Cut aperture in ceiling4.75" (121 mm) diameter.

Connect driver to frame jbox.Breakaway frame tab and insert into ceiling.

Connect power to jbox.Insert driver into ceiling.

7.50"

190mmMinimum Depth:

Parallel or Perpendicular Orientation

7.50"

190mmMinimum Depth:

(D) DRYWALL INTEGRATED MOUNTING

All rights reserved. © Fluxwerx Illumination Inc 2017

®

Due to continuous product improvements, specifications and dimensions are subject to change without notice. Certain options have limited compatibility with some other product selections. Consult www.fluxwerx.com for most current technical information.

PAGE2 of 2

IDC-DRYWALL-SPECDATANov, 2017

OR

Installation Wiring Details

twistwire connectors supplied by Fluxwerx; connected by others

Low Voltage Wiring (Driver to Fixture)

LV powercord preinstalledon fixture by FluxwerxLV powercord may have 2, 4 or 8 conductors

Line Voltage Wiring (Driver to Panel)

prewired driver attached to flexible conduit and 90° elbow connector;preassembled by Fluxwerx

pushwire connectors suppliedby Fluxwerx; connected by others

flexible conduit attached to driver with 90° elbow connector supplied by Fluxwerx; connected by others

conduit and wire to/from panel; supplied and installed by others

For mounting integrated driver, suspension and power feed locations. Driver can be installed in 3 orientations; either of the 2 (A) parallel positions or (B) perpendicular to the junction box; locking hanger bars are adjustable, reversible and removable. Designed for GWB or plaster finished ceiling thicknesses of 0.5" - 0.875” (12 - 22 mm). Suitable for either new construction or for retrofit conditions using the breakaway frame.

Drywall + Plaster Rough-In Frame

Canopies

Alternative Mounting Options

Power Feed

SuspensionH

ange

r B

ar E

xpan

sion

m

in. 1

4-2

6 m

ax.

(min

. 356

-660

max

.)

ON or OFF Grid(G) Grid Integrated

Integrated clip, driver, power feed and mounting suspension points suitable for accessible ceiling grid heights of < 1.75” (44 mm)

0-10V Dim

120-277V

Lutron

347V

eldoLED

Battery Pack

Detached Method Horizontal or Vertical

Hard Lid Ceilings(R) Remote

0-10V Dim

120-277V

Lutron

347V

eldoLED

Battery Pack

External remote mounted driver. Power feed and suspensionpoints suitable for exposed conduit or recessed junction boxes

Hard Lid Ceilings

Power Feed Suspension Canopy

(S) Structure Integrated

Integrated driver, power feed and mounting suspension pointssuitable for exposed surface conduit or recessed junction boxes

0-10V Dim

120-277V

Lutron

347V

eldoLED

Battery Pack

inches

(mm)dimensions

3.38

(86)

5.25

(133)

12.26

(312)

1.53

(39)

Perpendicular

B

Position

8.13(206)

5.00(125)

7.38

(18

7)

4.75

(121)

3.38

(86)

0.28

(7)

5.50

(140)

5.50

(140)

3.70

(94)

Parallel

A

Position