Upload
gsv988
View
229
Download
0
Embed Size (px)
Citation preview
7/31/2019 Cement Testing_ Equipment
1/16
Cement Testing EquipmentWith our extensive industry experience, we offer a complete range of cement testing equipment to our clients, which are
used to detect sampling/ fineness, consistency, soundness of the products. These are made as per BIS, BS, DIN & ASTM
standards that ensures optimum performance at clients end. Further, our equipment are tested for accuracy prior to final
delivery to the customers. The range of products we offer under this category include:
Beam Moulds
We offer beam moulds, which are made as per IS : 516, IS : 10086-1982 standards. These are used for making cement concrete. Further, our range is also
used for testing of prisms or bars of square cross- section for flexural strength tests. Moreover, the inside faces are machined flat to within 0.02 mm toleranceand inside dimensions are accurate to 0.2 mm. In addition to this, our products are made of cast iron or steel, supplied complete with base plate.
Product Code: HC42.55
Send Enquiry
7/31/2019 Cement Testing_ Equipment
2/16
Compression Testing Machine With Digital Readout Unit
We offer compression testing machine with digital readout unit, which are incorporated with load frames and designed to withstand a few million times of full
cycles of loading without any sign of distortion or fatigue. These frames are light in weight and the base carries a fine finished hydraulic ram and the lower
platen. In addition to this, the top plate has the spherical seating to take care of any irregularity of the specimen surface or slight misplacement of the
specimen from the central position.Moreover, our range also consist of pumping unit, which is attached on the right hand side of the loading unit. It is a multi plunger pump submersed in the
tank and is powered by 1.5 kW electric motor.
We also add power pack, which gives non-pulsating flow to the hydraulic ram to ensure smooth loading of the specimen which can be seen by the movement
of the load gauge/digital display. Further, the flow of the oil can be precisely controlled by the strain control knob located at a convenient height.
In addition to this, the indication of load is on digital display system, which is directly indicated in respective engineering unit. The electronic display unit of our
product is microprocessor based with a built in RS232 serial port. This helps in indication for load, peak load, and pace rate indicator.
The specifications of our products are as follows:
Capacity : 2000 kn
Max. ram travel : 75 mm
Day light clearance : 350 mm
Horizontal clearance : 325mm
Size of platen : 300 mm
Product Code: HLM592
Send Enquiry
7/31/2019 Cement Testing_ Equipment
3/16
Compression Testing Machine With Three Gauge
Our range of compression testing machine with three gauge are incorporated with load frame, pumping unit to provide efficient performance at clients end.
These are available in the following specifications:
Capacity : 2000 kn
Maximum ram travel : 50 mm
Day light clearance : 350 mm
Horizontal clearance : 280 mm
Platen size : 256 mm
Product Code: HC44.95-W
Send Enquiry
Cube Mould 150mm
Our range of cube moulds are made of cast iron, which are available with an internal size of 150mm, tolerance of +or- 0.2mm and planeness is +or- 0.03mm.
These are made as per the I.S.I Mark IS: 10080-1982 standards. Moreover, our range id used in diverse research institutions.
Product Code: HC42.25
7/31/2019 Cement Testing_ Equipment
4/16
Send Enquiry
Cube Mould 70.6mm
We offer cube moulds, which are made of steel and the tolerance faces is maintained between at +or- 0.1mm and planeness is +or- 0.03mm. These are
made as per the I.S.I mark IS : 10080-1982 standard. Further, our range is offered at market leading price and can be customized as per the clients
requirement.
Product Code: HC42.10
Send Enquiry
Flexure Testing Machine
Our range of flexure testing machine are operated with the help of a key board. During the testing process, the readings are displayed on the digital display
along with pace rate indication. When the specimen breaks, the ram retracts to its original position. Further, the accuracy of the displayed reading of our
range is as per IS 1828 grade I or BS 1610 grade A. We can also provide our range to meet the norms of BS 1881. Apart from this, our machines operates
on 220 volts, single phase supply.
Product Code: HCA644.05
7/31/2019 Cement Testing_ Equipment
5/16
Send Enquiry
Los Angels Abrasion Testing Machine
Our range of Los Angels abrasion testing machine are used for estimation of abrasion value of coarse aggregate. These comprises of the following:
A hollow steel cylinder mounted on a sturdy frame on ball bearings capable of rotating about its axis in a horizontal position.
Detachable shelf fitted inside the cylinder at a distance of 1250 mm from the opening measured along the circumstance in the direction of rotation
Motor with reduction gear which runs the drum at 30-33 rpm.
Tray
Revolution counter
Abrasive charge consisting of 12 steel ball approximately 48 mm diameter and each weighing between 390 and 445 g and suitable for operation
on 440 v, 50 Hz, 3 phase supply.
Product Code: HA50.60
Send Enquiry
7/31/2019 Cement Testing_ Equipment
6/16
Slump Test Apparatus
Our range of slump test apparatus are used for determination of slump of fresh concrete mix as a measure of its consistency where the nominal size of
aggregate does not exceed 38 mm.
The apparatus comprises the following:
Slump cone 100 mm diameter at the top, 200 mm diameter at the bottom and 300 mm high with two cleats and lifting handles.
Base plate with clamping arrangement for the slump cone and a swivel handle which also serves as the datum for measuring the slump.
Tamping rod 1.6 cm diameter and 60 cm long with one end rounded and graduated from 0 to 15 cm in 0.5 cm spacing to measure the slump.
Product Code: HC37.60
Send Enquiry
Tensile Tester
We offer HL692 series of universal testing machines that confirms to the testing procedures laid down in BIS , EN , ASTM and JIS standards. These are used
for testing of engineering materials like metals, plastics, elastomers, papers and many others in compression and tension mode.
Further, our range is designed with one pillar for the loading units up to the range of 5 kN and two pillars for ranges above 5 kn. Our range also have ball
screw driven through the highly sensitive servo motor. The rate of loading for testing is controlled by the computer and has step less loading with the rate of
strain varying from 0.01 500 mm/min. Moreover, the setting of our range can be done at the speed of 1000 mm/min or more.
Apart from this, our system comprises of electromechanical load frame with data acquisition & control unit, software package, load cell, displacement
transducer, a set of grips/jaws, standard computer. In addition to this, our machines also possess the following:
7/31/2019 Cement Testing_ Equipment
7/16
Computerized display and control unit.
Software package
Load cell - 0.5kn - 100kn
Displacement transducer
Grips
Computer
Product Code: HL692
Send Enquiry
Universal Testing Machine
We offer universal testing machines, which are fast, accurate, & simple to operate. In our machines, the load and displacement are displayed on the digital
display system in their respective engineering units. Further, our range is also incorporated with digital display unit have RS232 communication port. When
our range is connected to computer online graph can be displayed on the screen. Moreover, our range is supported by windows based software, which can
store, retrieve readings as per the requirement of the user.
Our range can perform the following tests:
Tension
Compression
Transverse
Bending
Shear
Hardness
Further, the three main units of our machines are as follows:
Loading frame
Hydraulic pumping system
Electronic control panel
The technical specifications of our range include:
8-bit Processor with multi processing facility.
LCD Panel with 4 x 20 characters.
Printer facility (printer not part of the supply).
Key board with 16keys.
A direct PC connection using RS232 port connected with D39 connector.
7/31/2019 Cement Testing_ Equipment
8/16
Flash memory of 512KB.
Product Code: HL590
Send Enquiry
Universal Testing Machine Autopacer
Our range of universal testing machine autopacer are designed for the automatic pace setting arrangement. The pace setting of our machine is achieved
through a combination of advanced electronic and hydraulic system. Further, the pacing speed is programmed through the computer key board which is
directly displayed is engineering units on the computer screen.
In addition, our range is incorporated with the proportional valve that have a drive card, which corrects the error between the feed and the follower signal and
the follower signal and makes the machine to run at a set speed irrespective of any specimen behavior.
The computer is used for high speed data acquisition and controlling card (DAQ). This keeps the pace rate within the limits of 2% of the programmed valve
and on line graph of load vs. displacement is shown on the screen where as in the off line it gives the total details on the listed specimen, like breaking load,elongation at breaking load, shear value, specimen identification detailed time of test etc.
Product Code: HLC591
Send Enquiry
7/31/2019 Cement Testing_ Equipment
9/16
Vicat Apparatus
We offer vicat apparatus, which are used for determination of normal consistency of hydraulic cement, gypsum plaster and lime and setting time of cement,
gypsum plaster and gypsum concrete. These consist of the following:
A frame with a vertically moving bearing rod.
Mould in the form of frustum of a cone 70 mm bottom diameter, 60 mm top diameter and 40 m high with base plate.
Needle 1 mm diameter x 50 mm long.
Plunger 10 mm diameter x 50 mm long.
Plunger 19 mm diameter x 44.4 mm long.
Plunger 12.5 mm diameter x 25 mm long.
One brass weight.
Product Code: HC37.15
Send Enquiry
Zhuozhou Tianpeng I&E Corp.Ltd
Concrete Test Mould
7/31/2019 Cement Testing_ Equipment
10/16
special moulds for concrete hardened or compresstive testing.including cube mould,cylinder mould,beam mould and special design moulds
Picture Gallery |List View
Total 7 Products
Concrete Cube Mould
(cm-fc)
Cylinder Mould for Concrete Copresstive Testing
(150dia.*300mm high)
http://goviews%28%272%27%29/http://goviews%28%272%27%29/http://cheerjazz.en.ec21.com/Concrete_Cube_Mould--1258315_1100735.htmlhttp://cheerjazz.en.ec21.com/Cylinder_Mould_for_Concrete_Copresstive--1258315_1258312.htmlhttp://cheerjazz.en.ec21.com/Cylinder_Mould_for_Concrete_Copresstive--1258315_1258312.htmlhttp://cheerjazz.en.ec21.com/Concrete_Cube_Mould--1258315_1100735.htmlhttp://goviews%28%272%27%29/http://cheerjazz.en.ec21.com/Concrete_Cube_Mould--1258315_1100735.htmlhttp://cheerjazz.en.ec21.com/Cylinder_Mould_for_Concrete_Copresstive--1258315_1258312.html7/31/2019 Cement Testing_ Equipment
11/16
Slump Cone Set
(SM-E)
Test Sieve
(200mm,300mm dia.)
Compression Testing Machine
(TYE -2000a)
Test Sieve Shaker
(DBS-300)
cube mould for concrete specimen making
(cm-pb)
Fluid Mechanics Lab
Metacentric height ship model test rig
Bernoullis theorem apparatus
Pitots Tube Test Set-up
Orifice Meter apparatus
Venturimeter apparatus
Soil Engineering Lab
Density hydrometer
Liquid limit device
Shrinkage limit
Standard proctor compaction test
Permeability apparatus
http://cheerjazz.en.ec21.com/Slump_Cone_Set--1258315_1698552.htmlhttp://cheerjazz.en.ec21.com/Test_Sieve--1258315_1758489.htmlhttp://cheerjazz.en.ec21.com/Compression_Testing_Machine--1258315_1765744.htmlhttp://cheerjazz.en.ec21.com/Test_Sieve_Shaker--1258315_1765746.htmlhttp://cheerjazz.en.ec21.com/cube_mould_for_concrete_specimen--1258315_1765750.htmlhttp://cheerjazz.en.ec21.com/cube_mould_for_concrete_specimen--1258315_1765750.htmlhttp://cheerjazz.en.ec21.com/Test_Sieve_Shaker--1258315_1765746.htmlhttp://cheerjazz.en.ec21.com/Compression_Testing_Machine--1258315_1765744.htmlhttp://cheerjazz.en.ec21.com/Test_Sieve--1258315_1758489.htmlhttp://cheerjazz.en.ec21.com/Slump_Cone_Set--1258315_1698552.htmlhttp://cheerjazz.en.ec21.com/Slump_Cone_Set--1258315_1698552.htmlhttp://cheerjazz.en.ec21.com/Test_Sieve--1258315_1758489.htmlhttp://cheerjazz.en.ec21.com/Compression_Testing_Machine--1258315_1765744.htmlhttp://cheerjazz.en.ec21.com/Test_Sieve_Shaker--1258315_1765746.htmlhttp://cheerjazz.en.ec21.com/cube_mould_for_concrete_specimen--1258315_1765750.html7/31/2019 Cement Testing_ Equipment
12/16
V-Notch apparatus
Pipe Friction apparatus
Orifice & Mouth Piece apparatus
Digital Tachometer
Pelton Wheel Turbine Test Rig
Fibre Glass lining for tanks
Reciprocating Pump Test Set Up
Centrifugal Pump Test Set Up Gear Pump Test Set Up
Jet Pump Test Set Up
Submersible Pump Test Set Up
Francis Turbine Test Rig
Stop Watch
1m Steel rule
1 Feet Steel rule
Ring spanner set (12 Nos)
Double end spanner set (10 Nos)
Steel tape (5m)
Pipe wrench 24
Flow through Packed set up
Fluidized Bed Set up
Turgo Impulse Turbine Test rig
Lynx FRP Rain Gauge
Calibration test Rig for Roto Meter ( Closed Circuit
apparatus )
Multistage Centrifugal pump
Closed Circuit Test Rig- Apparatus for determine
losses due to pipe fittings minor losses
One dimension consolidation test
Hot air oven
Electronic digital top loading balance (2 kg)
Electronic digital top loading balance (5 kg)
High speed stirrer
Thermometer
Test sieve
Sieve shaker Direct shear test apparatus
Unconfined compression test apparatus
Proving ring 5tonnes capacity
Baker mercer dial gauge
Accessories for unconfined compression test-proving
ring 3T
Baker mercer dial gauge
Coning tools
A set of platens
Universal extruder apparatus
Shrinkage limit apparatus
Proctor compaction apparatus Field density apparatus
Triaxial shear test apparatus
Soil extruder
Infra red moisture meter
Core cutter
Test sieve
Field Density - Sand pouring cylinder with tray andcontainer
Manual Weight BalanceStrength of Material Lab
Rock well cum Brinell Hardness Tester
Universal Testing Machine
Compression Testing Machine(1000 KN)
Spring Testing Machine ( 50 KN)
Impact Testing Machine
Torsion Testing Machine
Flexure Testing Machine
Outer Caliper 8
Inner caliper 8
6 Vernier Caliper
Steel Rule 1
Spring divider 6
Drop forged hammer 1 Ibs
6 Screw driver
Chisel x 4
Center bunch
Proving Ring ( 40 T capacity )
Lynx Longitudinal Compresometer
Vickers harness Tester
Magnetic base for fixing Dial Gauge
Dial Gauge with Magnetic stand
Concrete Lab
Beam mould
Cube mould
Compaction factor apparatus
Le-chatelier mould
Vicat needle apparatus
Aggregate impact tester
Cast iron cylindrical mould
Aggregate crushing value apparatus
Test sieves set
Concrete penetrometer
laboratory concrete mixer hand operated
Rebound Hammer
Mortor cube mould
Concrete cube mould
Pycnometer
Slump test apparatus
Trovels and planers
Blaines air permeability apparatus
Cement specific gravity apparatus
Vibrating table
Bitumen testing apparatus (viscosity-standard tar
viscometer)
Bitumen testing apparatus (Binder content bitumen
7/31/2019 Cement Testing_ Equipment
13/16
CAD Lab
NISA / CIVIL Floating License
Arc View Version 8.3
Auto Cad 2005
Strap Suite Ver 11.0
Architectural Desk top 2005
3D Studio Viz 2005
TVS Dot Matrix 132 Column Printer
HP Plotter A0 Size
extractor)
Bitumen softening point apparatus, Ring and Ballapparatus
Dorry abrasion testing machine
Deval abrasion testing machine
Penetrometer apparatus with electronic digital timer
and electrical arrangement with brass cone and
needle Flakiness index tester
Ductility test apparatus
Flow table
Vee bee consistometer
Laboratory C.B.R. Apparatus
Beam Mould
Cast Iron Cylinder Mould
Survey Lab
Survey chain 30m with arrows
Ranging rod (1)2 meter
Ranging rod (2)3 meter
Cross staff
Optical square in wooden box
Freeman metallic tape (a)30 meter
Freeman metallic tape (b)15 meter
Prismatic compass 100mm dia with wooden stand
Surveyors compass
Plane table survey
Prospector level
Tilting level
Vernier theodolite
Clinometer compass
Pentograph in wooden box
Ghat tracer
Plainmeter in wooden box
Levelling staff
Abney level
Box sextant
Subtance box (3m length)
Electronic thedolite
Line ranger
Survey umbrella
Pocket umbrella
Parrallex bar
GPS
7/31/2019 Cement Testing_ Equipment
14/16
Manufacturer and exporter of quality class equipments, seed testing
instruments, metereological instrument suppliers, cement concrete
testing equipments seed testing equipments India, Cube Moulds, Soil
Testing Equipments, Cement Concrete Testing Equipments, Cube
Mould Manufacturers Paper, Seed Testing Instruments
Metereological Instruments etc.
Zeal International is a reputed name and a leading manufacturer and
exporter of high quality industrial testing, scientific and laboratory
equipments. With a successful business history of over thirty five years, we
offer a range of products required by testing laboratories for Soil,
Cement/Concrete, Aggregate, Bitumen/Asphalt, Surveying, Paint, Oil &
Petroleum, Paper, Textile, Yarn, Cable & Wire, Wood, Sugar, Rubber,
Scientific, Educational, Chemical & Glassware and Security at highly
competitive rates.
Many new features are incoporated in this web site like 'Shopping Cart'
which helps you to select the products you are intereted in, and sends a
computer generated list through mail.
Keeping customer's satisfaction in view, we will keep on updating the site.
Your feedback / suggestions are most welcome.
Welcome to Zeal International : An ISO 9001 Certified Company.
Zeal International was established to innovate, research and design; material testing instruments for soil, cement, concrete, bitumen, asphalt and
more. Now this is the second generation and Zeal International is a modern organization with latest technology and efficient management policies.
Zeal international has gained several quality marks on its product for designing & manufacturing the same as per BIS, ASTM, AASHTO, BS, IP &
relevant standards. But on a contrary we kept a specialty to manufacture the product according to END USER's specifications and requiremen
development team works at the cutting edge of modern technology with the result that each testing instrument meets all requirements of the user to
the future.
Our Network :
Our export countries include South Africa, Oman, Dubai, Riyadh, Afganistan, Uganda, Iraq, Canada, Tanzania, Cameroon, Syria, Madagascar, Egypt, S
Nepal, Australia and Libya.
Our associates :
Exploring and innovating latest technology cant get completed with out good brands.
With more than 30,000 products, catalogies, ranges, sizes, brands we have stocked some of the best brands in the world to serve our customers w
best products available world wide.
1. Leica: Autolevels, digital theodolite, total stations, gps systems, disto meter.
2. Excell, Globus & Sansui brand : Electronic weighing precision scales.
3. Dhona : Chemical balances electrically operated upto 0.01 mg accuracy
4. Wika : pressure,temperature instruments.
5. Kaycee : Flowmeters,measuring wheels.
6. GlaxoSmithKline : Laboratory chemicalsBa
http://www.scientificdealers.com/zeal/#tophttp://www.scientificdealers.com/zeal/#top7/31/2019 Cement Testing_ Equipment
15/16
Products
CEMENT/SOIL/BITUMEN INST. Cement Autocalve Compression Testing Machine Consolidation Apparatus Direct Shear Apparatus
High Temperature Furnace Humidity Chambers Sieve Shaker & Test Sieves Liquid Limit Apparatus Cube Moulds Penetrometer/Fld Density.App Rapid Moisture Tester Slump Cone Test Apparatus Vibrating Machine & Table Bomb Calorimeter Jaw Crusher Laboratory Pulverizer Mortar Mixer C.B.R Test Apparatus Proctor Compaction Apparatus Proving Rings Vicat Needle Apparatus Ductility Testing Instruments
Bitumen Extractor Marshall Apparatus CHEMISTRY, BIOCHEMISTRY Autoclave Rotary Flash Evaporator Muffle Furance Heating Mantle Hot Plate Kjeldahl Distillation Unit Laboratory Oven Pipette Washer Automatic Shaking Machine Lab Stirrer / Magnetic Stirrer Rotary Vacuum Pump VDRL Rotory & Vortex Shaker Water Bath Water Bath High Precision Water Still
Thin Layer Chromotography (TLC Kit) Colorimeter / Spectrophotometer Digital pH Meter Conductivity Meter Flame Photometer Karl Fischer Titrator B.O.D. Incubator Turbidity MeterSEED TESTING INSTRUMENTS Seed Blowers Seed Counter Humidifier Gamet Precision Divider Grain Moisture Meter Boerner Sampler Growth Chambers Seed Germinator
PAPER TESTING INSTRUMENTS
Bursting Strength Tester Paper Tensile Tester Brightness Tester Cobb Sizing Tester
Micrometer pH Meter Beating & Freeness Tester Quadrant Scale Hydrometers
OIL / GREASE TESTING INST. Kinematic Viscocity Bath Penetrometer Red Wood Viscometer Cloud & Pour point Apparatus Abels Flash point Apparatus Cleaveland Flash & Fire Point Apparatus Melting point Apparatus Glass Viscometer Pensky Marten Flash Point ApparatusPAINT TESTING INSTRUMENTS Centrifuge
Gloss Meter Hegman Gauge Karl Fischer Titrimeter Pensky Marten Flash Point Apparatus Softening Point Apparatus Salt Spray Cabinet Ford Cups Lovibond Tintometer Soxhelt Extraction Apparatus Brook Field Viscometer Red Wood ViscometerPHARMACEUTICAL SUGAR INST. Autoclave Polarimeter with Sodium Vapour lamp Refractometers Infrared Moisture Balance Vacuum Oven with Pump Tablet Disintegration Test Apparatus
Tablet Dissoluation Rate Test App. Tablet Friability Test Apparatus Vacuum Oven Karl Fischer Titrimeter Flame Photometer Thin Layer Chromatography Spectrophotometer BOD Incubator Brook Field Viscometer
GENERAL LAB INSTRUMENTS Autoclave Hot Air Oven Electric Muffle Furnace Hot Plates
Electric Water Still Vacuum Pump Sieve Shaker & Test Sieves Shaking Machine pH Meter Digital Lab Stirrers/Magnetic Stirrers Water Bath Thermo/Sero Water Bath High Precision Oil Bath Heating Mantles Ball Mill Willey Mill Humidity Cabinet Jar Test Apparatus V.D.R.L. MEDICAL INSTRUMENTS Clinical Centrifuge Colony Counter
Hot Plate Laboratory Oven Laboratory Incubator VDRL Shaker Water Still Shaker Kahn & Rotary Water Bath Incubator Shaker Slide Cabinet Microscope Microtome Laminar Flow Bench Tele Thermometer Incinerator Electirc / Oil Fired METTALLURGICAL INST. Carbon & Sulphur Apparatus Muffle Furnace Abrasive cut off Machine Fortons Barometer'
Polishing Machine Hardness tester Brinell/Rockwell Metallurgical Microscope Specimen Mounting Press Hot Air Oven Salt Mist Chamber NML Samples/BCS Samples Platinum CrucibleMETEREOLOGICAL INSTRUMENTS Altimeters Anemometer Hydrometer Rain Gauge Maximum Minimum Thermometer Whirling Psychrometer Wet & Dry Bulb Thermometer Thermo Hydrograph Sound Level Meter
Velocity Meter
7/31/2019 Cement Testing_ Equipment
16/16
Core Drilling Machine CBR Test Apparatus Test Sieve Marshall Stability
Test Apparatus
Laboratory Oven Auto Level Digital CompressionTesting Machine
Cube Mould
Microscope Cube Vibrating Machine Glasswares Rapid Moisture Meter
Ba
Contact us or send online enquiry
ZEAL INTERNATIONAL1, NETAJI SUBHASH MARG
DARYA GANJ,NEW DELHI-110002
INDIA.
Phones : +91-11-23244474, 23276114,23250281, 23278846, 23277588
Mobile : +91-98116-14377, +91-98110-47617
Fax : +91-11-23273214
E-Mail : [email protected]
Our Objectives and Better technology & workmanship is always been a key
success. Our motto is to accelerate onto quality produ
complete customer satisfaction.
We have a slim but efficient organization, which can sho
reflexes. With small top-level management, it can hav
decision making for coping up with todays fast paced busin
Zeal Internationals dedication to the service of industry is
heritage of the company which continues today and
fostered in future too. Quality equipment, fast, at the righ
Thats Zeal International.
http://www.scientificdealers.com/zeal/#tophttp://www.scientificdealers.com/mail/[email protected]:[email protected]?subject=Mail%20Through%20Scientificdealers.comhttp://www.scientificdealers.com/zeal/#tophttp://www.scientificdealers.com/mail/[email protected]:[email protected]?subject=Mail%20Through%20Scientificdealers.com