CEMENTEX PUTS THE HIGHEST STANDARD OF SAFETY IN YOUR …

CEMENTEX PUTS THE HIGHEST

STANDARD OF SAFETY INYOUR HANDS.

CEMENTEX PUTS THE HIGHEST

STANDARD OF SAFETY INYOUR HANDS.

PRODUCTS INC.

SINCE 1956

1000V INSULATED PRODUCTS1000V INSULATED PRODUCTS

PRODUCTS INC.

SINCE 1956

2 •

CEMENTEX

TOOL KITS . . . page 5

PLIERS . . . page 12WRENCHES . . . page 13

SERVICE ROLLS . . . page 9

SCREWDRIVERS & NUTDRIVERS . . . page 11

www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442

• 3

DOING THE JOB SAFELY IS WHAT WE ARE ALL ABOUT.

PROTECTIVE CLOTHING . . . page 19

HANDY TOOLS . . . PAGE 14SOCKETS & RATCHETS . . . PAGE 15

INSULATED GLOVES. . . page 16

PPE . . . page 18


4 •

TOOL KITS

MRO SUPER KITCATALOG # CODE #

ITS-60B 13407ITS-60B/T* 13408

DELUXE MRO SUPER KITCATALOG # CODE #

ITS-60B-DLX 13409ITS-60B-DLX-W 13411ITS-60B/T* 13410ITS-60B/T-DLX-W* 13412

* (includes torque Wrench)

• 9/64” x 2” Slotted Screwdriver• 3/16” x 4-1/2” Slotted Screwdriver,

Cushion Grip• 3/16” x 6” Slotted Screwdriver,

Cushion Grip• 1/4” x 6” Slotted Screwdriver, Cushion Grip• 5/16” x 6” Slotted Screwdriver,

Cushion Grip• #2 x 4” Phillips Screwdriver, Cushion Grip• #2 x 8” Phillips Screwdriver, Cushion Grip

• 9” Linesman’s Pliers • 8” Needle Nose Pliers • 7-1/2” Diagonal Pliers• 9-1/2” Diagonal Pliers• 10” Water Pump Pliers• Combination Stripper/Crimper Pliers• 14 pcs. 1/16” to 1/2” Long Arm Hex

Wrench Set• 3/8”Drive Reversible Ratchet• 3/8” Drive x 3” Extension

• 3/8” Drive x 6” Extension• 10 pcs. 5/16” to 7/8” Socket Set• 11 pcs. 3/8” to 1” Box End Wrench Set• 3/16” x 6” B/E Nutdriver, Cushion Grip• 1/4” x 6” B/E Nutdriver, Cushion Grip• 11/32” x 6” B/E Nutdriver, Cushion Grip• 3/8” x 6” B/E Nutdriver, Cushion Grip• 7/16” x 6” B/E Nutdriver, Cushion Grip• 1/2” x 6” B/E Nutdriver, Cushion Grip• 30” - 150” Torque Wrench

DELUXE MAINTENANCE KIT CATALOG # CODE #

ITS-MB430 11430ITS-MB431* 11431CONTENTS:• 9/64” x 2” Slotted Screwdriver• 3/16” x 4-1/2” Slotted Screwdriver, Cushion Grip• 1/4” x 6” Slotted Screwdriver, Cushion Grip• #1 x 3” Phillips Screwdriver, Cushion Grip• #2 x 4” Phillips Screwdriver, Cushion Grip• 9” Linesman’s Pliers • 8” Needle Nose Pliers • 7-1/2” Diagonal Pliers• 3/8”Drive Reversible Ratchet• 3/8” Drive x 3” Extension • 3/8” Drive x 6” Extension• 8pcs. 3/8” to 13/16” 3/8” Dr. DW Sockets - 12 pt.• 8pcs. 3/8” to 13/16” Box End Wrench Set• 30” - 150” Torque Wrench • Mini Flashlight

*8 Pc. Geared, Box Wrench Set

CONTENTS:

DELUXE KIT WITH WHEELS


• 5

COMPLETE KITS TO DO THE JOB SAFELY.

ELECTRICIAN TOOL SET 30PC. CATALOG # CODE #

ITS-30B 13406ITS-30B-SC 13415

• 1/4” x 4-1/2” Mechanics Screwdriver,Cushion Grip

• 5/16” x 6” Mechanics Screwdriver,Cushion Grip

• 3/8” x 8” Mechanics Screwdriver,Cushion Grip

• 3/16” x 4-1/2” Slotted Screwdriver,Cushion Grip

• 3/16” x 6” Slotted Screwdriver, CushionGrip

• 1/4” x 6” Slotted Screwdriver, CushionGrip

• #1 x 3” Phillips Screwdriver, CushionGrip

• #2 x 4” Phillips Screwdriver, CushionGrip

• 3/16” x 2-1/2” Nutdriver, Cushion Grip• 1/4” x 2-1/2” Nutdriver, Cushion Grip• 5/16” x 2-1/2” Nutdriver, Cushion Grip• 11/32” x 2-1/2” Nutdriver, Cushion Grip• 3/8” x 2-1/2” Nutdriver, Cushion Grip• 7/16” x 2-1/2” Nutdriver, Cushion Grip• 1/2” x 2-1/2” Nutdriver, Cushion Grip• 3/16” x 6” T-Handle Hex Wrench• 1/4” x 6” T-Handle Hex Wrench• 5/16” x 6” T-Handle Hex Wrench

• 3/8” x 6” T-Handle Hex Wrench• 7/16” x 6” T-Handle Hex Wrench• 1/2” x 6” T-Handle Hex Wrench• 9” Linesman’s Pliers• 8” Needle Nose Pliers• 7-1/2” Diagonal Pliers

• 9-1/2” Cable Cutting Pliers• 10” Water Pump Pliers• 12” Water Pump Pliers• 10” Crimping Pliers• 8” Slip Joint Pliers • 6” Flat Nose Pliers

CONTENTS:

ELECTRICIAN TOOL KIT CATALOG # CODE #

ITS-MB410 11410CONTENTS:• 9” Linesman’s Pliers• 7-1/2” Diagonal Pliers• 7” Needle Nose Pliers• 9/64” x 2” Slotted Screwdriver, Cushion Grip• 3/16” x 4-1/2” Slotted Screwdriver, Cushion Grip• 1/4” x 6” Slotted Screwdriver, Cushion Grip• #1 x 3” Phillips Screwdriver, Cushion Grip• #2 x 4” Phillips Screwdriver, Cushion Grip• Mini Flashlight• 1/2” dr Reversible Ratchet• 12” dr x 5” Ext. Bar• 1/2” dr x 10” Ext. Bar• Sockets: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, & 3/4”


BASIC TOOL SET - 23 TOOLS PLUS BOX CATALOG # CODE #

ITS-24B 13405CONTENTS:• 9” Linesman’s Pliers• 6” Diagonal Pliers• 6” Needle Nose Pliers• 8” Slip Joint Pliers• 10” Crimping Pliers• 10” Water Pump Pliers• 3/16” x 4-1/2” Electrician Slotted Screwdriver• 1/4” x 6” Electrician Slotted Screwdriver• 1/4”x 4-1/2” Mechanics Slotted Screwdriver• 5/16”x 6” Mechanics Slotted Screwdriver• #1 x 3” Phillips Screwdriver• #2 x 4” Phillips Screwdriver• 3/16”, 1/4”, 3/8”, 7/16”, 1/2” Long Arm Hex Wrench• 1/4”, 5/16”, 3/8”, 7/16” & 1/2” Nutdrivers w/

2-1/2” Shaft

6 •

TOOL KITS

MAINTENANCE TOOL KIT CATALOG # CODE #

ITS-MB420 11420CONTENTS:• 9” Linesman’s Pliers• 7-1/2” Diagonal Cutting Pliers• 7” Needle Nose Pliers• 9/64” x 2” Slotted Screwdriver• 3/16” x 4-1/2” Slotted Screwdriver, Cushion Grip• 1/4” x 6” Slotted Screwdriver, Cushion Grip• #1 x 3” Phillips Screwdriver, Cushion Grip• #2 x 4” Phillips Screwdriver, Cushion Grip• Mini Flashlight• 1/2” dr Reversible Ratchet• 12” dr x 5” Ext. Bar• Sockets: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, & 3/4”• Open End Wrenches: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”,

11/16”, & 3/4”

TELECOMMUNICATIONS TOOL KIT CATALOG # CODE #

TCK-101 13441CONTENTS:• 9” Linesman’s Pliers• 6” Needle Nose Pliers• 3/16” x 4-1/2” Cab. Slotted Screwdriver• 1/4”x 4-1/2” Mechanics Slotted Screwdriver• 5/16”x 6” Mechanics Slotted Screwdriver• 3/8”x 10” Mechanics Slotted Screwdriver• #2 x 4” Phillips Screwdriver• 3/8” Drive Reversible Ratchet• 3/8” dr x 3” Extension• 3/8” Drive Sockets Sizes: 3/8”, 7/16”, 1/2” & 9/16”• 3/8” Drive DW Socket: 5/8”30”-150” Torque

Wrench

• Custom Tool Cases Available


• 7

TOOL SETSTIGHTEN UP ON SAFETY WITH OUR SETS.

SOCKET SETS CATALOG # CODE # DESCRIPTION PCS.

ISS14-13 11190 1/4” dr Ratchet, 3” & 6” Ext. Bars 13 Sockets: 3/16” thru 9/16” 6 pt.

ISS14-13L 11191 1/4” dr Ratchet, 3” & 6” Ext. Bars 13 DW Sockets: 3/16” thru 9/16” 6 pt.

ISS38-11 11197 3/8” dr Ratchet, 3” & 6” Ext. Bars 11 Sockets: 3/8” thru 13/16” 12 pt.

ISS38-11L 11199 3/8” dr Ratchet, 3” & 6” Ext. Bars 11 DW Sockets: 3/8” thru 13/16” 12 pt.

ISS12-12 11208 1/2” dr Ratchet, 5” & 10” Ext. Bars 12Sockets: 1/2” thru 1” 12 pt.

ISS12-12L 11210 1/2” dr Ratchet, 5” & 10” Ext. Bars 12 DW Sockets: 1/2” thru 1” 12 pt.

6 or 12 Point Sockets • Metric Sets • Custom Sets

HEX WRENCH SETS CATALOG # CODE # DESCRIPTION PCS.

HKS-8T 16110 T-Handle Hex Wrench Set 8Sizes: 1/8” thru 9/16”

HKS-12T 16112 T-Handle Hex Wrench Set 12Sizes: 3/32” thru 1/2”

HWS-8L 16128 Long Arm Hex Wrench Set 8Sizes: 1/8” thru 1/2”

HWS-14L 16130 Long Arm Hex Wrench Set 14Sizes: 1/16” thru 1/2”

• Metric Sets • Custom SetsAlso available in “T” handle as shown on page 9.

LONG REACH ELECTRONIC MINI PLIERS & SETCATALOG # CODE # DESCRIPTION

EP-OD5 19100 Oval Head DiagonalEP-CN6 19101 Chain Nose w/CutterEP-NN7 19102 Thin Needle NoseEP-FN6 19103 Flat Nose EP-TD5 19104 Thin DiagonalEP-BN6 19105 Bent Needle NoseEP-ZP 19106 Zippered PouchEP-7PK 19107 7 pc. Mini Plier Set


8 •

WRENCH SETSSHOCK PROTECTION TAKES A TURN FOR THE BETTER.

11 PIECE WRENCH SETCATALOG # CODE #

BOX END - IBEWS-11 11305OPEN END - IOEWS-11 11315

SIZES: 3/8”, 7/16”, 1 /2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”,7/8”, 15/16” & 1”

• Metric Sets • Custom Sets

8 PIECE WRENCH SETCATALOG # CODE #

BOX END - IBEWS-8 11300OPEN END - IOEWS-8 11310

SIZES: 3/8”, 7/16”, 1 /2”, 9/16”, 5/8”,11/16”, 3/4” &13/16”


GEARED BOX WRENCH SETSIdeal for accessing tight work areas to confining for a standardsocket and ratchet combination. Ratchet engages with as littleas 5° of arc. Continuous contact with fastener provides forsmooth and efficient operation than the repositioning requiredwith a standard box wrench.

8 PIECE WRENCH SET CATALOG # CODE #

IGRBW-8 11320

SIZES: 3/8”, 7/16”, 1 /2”, 9/16”, 5/8”, 11/16”, 3/4” &13/16”



• 9

TOOL KITS & ROLLSTOOL KITS & ROLLS THAT PACKAGE GREATER SAFETY.

METER READER ROLL ( 10 PCS.)CATALOG # CODE #

TR-10MRK 13445CONTENTS:

• 8” Needle Nose Pliers• Fuse Puller• Plug Wrench• 3/16”x 6” Slotted Screwdriver, Cushion Grip• 1/4” x 6” Slotted Screwdriver, Cushion Grip• #1 x 3” Phillips Screwdriver, Cushion Grip• #2 x 4” Phillips Screwdriver, Cushion Grip• 5/16” Nutdriver, Cushion Grip• 3/8” Nutdriver, Cushion Grip• 1/2” Nutdriver, Cushion Grip


T-HANDLE & LONG ARM HEX WRENCH KITSIncluding the NEW ergonomicallyenhanced “T” handle for morecomfortable use. 8 piece through14 piece kits available in both SAE& metric sizes

BASIC ELECTRICIAN’S SERVICE ROLL (9 PCS.)CATALOG # CODE #

TR-9ELK 13456CONTENTS:• 9” Linesman’s Pliers• 7-1/2” Diagonal Cutting Pliers• 7” Needle Nose Pliers• Combination Stripper & Crimper• 3/16 x 4-1/2” Slotted Screwdriver, Cushion Grip• 3/16 x 6” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • #1 x 3” Phillips Screwdriver, Cushion Grip• #2 x 4” Phillips Screwdriver, Cushion Grip



PLIER & CRIMPER/STRIPPER KIT (7 PCS.)CATALOG # CODE #

TR-8PCSK 13448CONTENTS:

• 9” Linesman’s Pliers• 7-1/2” Diagonal Cutting Pliers• 7” Needle Nose Pliers• Combination Stripper & Crimper• Crimping Tool• Fuse Puller• Plastic Pliers


10 •

SERVICE ROLLSSERVICE ROLLS THAT ARE ENGINEERED FOR JOB PROTECTION.

GAS SERVICE ROLL (11 PCS.)CATALOG # CODE #

TR-11GSK 13447CONTENTS:• 8” Linesman’s Pliers• 7-1/2” Diagonal Cutting Pliers• 8” Needle Nose Pliers• 9/64” x 2” Slotted Screwdriver• 3/16 x 4-1/2” Slotted Screwdriver,

Cushion Grip • 1/4” x 6” Screwdriver, Cushion Grip • 5/16” Nutdriver, Cushion Grip• 3/8” Nutdriver, Cushion Grip• 1/2” Nutdriver, Cushion Grip• Fuse Puller• Plug Wrench


METER SERVICE ROLL (12 PCS.)CATALOG # CODE #

TR-12MRSK 13446CONTENTS:• 9” Linesman’s Pliers• 7-1/2” Diagonal Cutting Pliers• 8” Needle Nose Pliers• 9/64” x 2” Slotted Screwdriver• 3/16 x 4-1/2” Slotted Screwdriver, Cushion Grip • 3/16 x 6” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Screwdriver, Cushion Grip • 5/16” Nutdriver, Cushion Grip• 3/8” Nutdriver, Cushion Grip• 1/2” Nutdriver, Cushion Grip• Fuse Puller• Plug Wrench



• 11

SCREW & NUT DRIVERSTIGHTEN UP YOUR OSHA STANDARDS WITH OUR DRIVERS.

SCREW HOLDERSGrips, seats, and removes screws in and around hardto reach locations. Spring loaded tip holds screwfirmly for seating and removal. Releases with a twist.Available in flat or Phillips tip.

NUTDRIVER ROLL6 pc. & 8 pc. / 3” & 6” lengths • Custom

SCREWDRIVER ROLL6 pc. & 8 pc. • CustomPHILLIPS HEAD

#1 thru #3 in lengths from 1” to 8”

MAGNETIC TIP SCREWDRIVER

ANGLE NUTDRIVERS1/2” to 3/4”

NUT DRIVERS3/16” to 5/8” in lengths from 3” to 6”

SCREWDRIVER & NUTDRIVER ROLL12 pcs. includes Roll

• All tools are double-insulated, tested to 10,000 VAC / 1500 VDC for Protection of People, Property and Productivity. • SEE ILLUSTRATED PRICE LIST FOR DETAILS.

CABINET TIP9/64” to 1/4” in lengths from 1-3/4” to 6”

MECHANIC TIP7/32” to 3/8” in Lengths to 10”


12 •

PLIERSGET A GRIP ON THE JOB WITH OUR SAFETY PLIERS.

CURVED NEEDLE NOSEAn excellent tool forconfined work areasand reaching betweenassemblies.

NEEDLE NOSEPerfect for looping,cutting and formingwire. Cutting edgesare induction hard-ened for long life.

DIAGONALHeavy duty forthicker gauge wire.

CABLE CUTTING PLIERSHigh leverage cutters with shear type blades forcutting 100 pair telephone cable, 4/0 aluminum,and 2/0 copper. Cutter with ring meets Bell specnumber R3371D2.

WIRE STRIPPERSState-of-the-art wire strippersfor solid or stranded wire.

WATER PUMPAvailable in 10 & 12 inch lengthswith a maximum capacity of 2”.

LINESMANHigh leverage designfor increased cuttingand gripping power.New England styledhead for easier accessto tight areas.Cutting edges induc-tion hardened forextended life.

UNIVERSALLINESMANWith crossover cut-ter, crimper, cross-hatched jaws forgripping and lowprofile head – goodchoice for limitedaccess areas. Lighterin weight for greateroperator comfortand control.

CABLE SCORING TOOLUsed to cut throughexterior cable insula-tion to facilitate strip-ping. Used extensivelyon older under-ground systems withlead sheathed wire.Available with orwithout insulation.Cutting edges heattreated to RC 42-45.

PLASTIC PLIERSDesigned as a gripping tool to move and positionwires and remove loose material from tight workareas. Grooved jaws for positive grip. Large han-dles and integral finger guards provide control andsafety. Reinforced fiberglass is non-conductive.

CRIMPINGTwo tools in one. Crimps solderless ter-minals and connectors ranging from#10 to 22 AWG. Also has wire cutterbuilt into base.

SLIP JOINTThese pliers have milled teeth and jaws to provide positive gripping on a wide variety of objects.

• OSHA 1910.335 Safeguards for Personnel protection section (2) (i) . . . when working near exposed parts, each employee shall use insulated tools or handling equipment. • SEE ILLUSTRATED PRICE LIST FOR DETAILS.

DUCK BILLSmooth jaws withwide flat grippingarea.


RATCHETINGBOX WRENCHESIn SAE & Metric from5/16” to 1” and 8mm to19mm

ADJUSTABLE WRENCHESNew fully insulated adjustablewrenches (8, 10 & 12”) meets ASTMSpecification. Standard insulatedwrenches from 6” to 15”

• 13

WRENCHESWRENCHES OF EVERY DESCRIPTION TO SIZE UP ANY JOB.

RATCHETING“BUG” BOXWRENCHESAvailable from 3/8” x7/16” to 3/4” x 7/8”

BOX WRENCHESAlso available in SAE orMetric from 1/4” to 3/4” and 6mm to 32mm

OPEN ENDWRENCHESBoth SAE & Metric sizesavailable from 1/4” to 1-1/8” and 6mm to32mm

“T” HANDLE SOCKET WRENCHAvailable in sizes from5/16” to 13/16”

“T” HANDLE HEX WRENCHNew ergonomically enhanced “T” handlefor more comfortableuse. Available in bothSAE & Metric from 1/8”to 9/16” and 2mm to10mm

All Double-Insulated Tools are manufactured in accordance with prevailing Standards: ASTM F1505-01 and IEC 900• SEE OUR ILLUSTRATED PRICE LIST FOR COMPLETE DETAILS

LONG ARM HEX WRENCHIn SAE sizes from 1/16”to 1/2” and Metricfrom 1.5mm to 24mm


NONSPARKING TOOLSTools of aluminum bronze for use in facilitieswhere flammable vapors or combustible residualmaterial is present. In addition to being non-sparking, these tools are non-magnetic and cor-rosion resistant. Refer to price list for selectionand description. SAE and Metric sizes available.

HOOK & PROBE SET4 Piece set with 4 steel pointconfigurations; straight point 90bend, 45 bend, and hook bend.

INSPECTION MIRRORMoveable faces for offset viewing. 12” handle

14 •

TOOLS TO MAKE THE TOUGH JOBS EASIER AND SAFER.HANDY TOOLS

BOLT CUTTERGeneral purpose cutter with alloy steeljaws and center cut blades for cuttingmaterials with a maximum hardness rating of Brinell 455/Rockwell C48. SECURE-A-TOOL LANYARD

Strong, convenient, safe. Prevents modified tools from beingdropped accidentally from overhead work sites. Elastic cord interchangeable. Adjustable wrist wrap adjusts for comfort.*For tether-ready tools add “ST” to each part number.

KNIVESHeavy duty tem-pered steel bladefor line work.Blade thru handledesign for addedleverage, control,and safety. Finger

guards to pre-vent hand slip-

page andblade capfor storage.

TUBE CUTTERCompact tubing cutter with extra-hard wheel and dual roller forsquare cuts on most plastic tubing.Maximum capacity is 1-1/2” OD.

RATCHETING CABLE CUTTER Designed for cutting alu-minum and MCM coppercable. Cutting heads are fin-ished in black oxide to mini-mize corrosion. On both toolsa locking mechanism closesthe handles for easy storage.CAUTION: DO NOT USE TO CUTSTEEL.

UNIVERSAL TRIPOD &TUBE HOISTAll aluminum construction with a500# rated capacity. Standard mod-els equipped with 50’ of syntheticbraided rope. SS and Galvanized air-craft type cable is available. Eachunit finished in Hi-Viz Yellow.

HACKSAWWelded steel framehas superior strength.5-1/2” extra deepthroat. Handle designallows user to wear insu-lating rubber gloves andprotectors.

NFPA 70E 2-3.7 Insulated Tool and Equipment: Employees shall useinsulted tools and/or handling equipment when working inside the

limited approach boundary of live parts where tools or handlingequipment might make accidental contact. Insulated tools shall be

protected from damage to the insulating material.• SEE OUR ILLUSTRATED PRICE LIST FOR COMPLETE DETAILS.

TAPE MEASURENon-conductive fiberglass tape measure.SAE & metric dual scale. Plastic housingwith manual rewind. For use in “live”electrical panels, on bus bars, battery/ups;and areas requiring measurements thatpose an electrical hazard.


• 15

SOCKETS, RATCHETS & EXTENSIONSSAFETY AT EVERY TURN.

OSHA 1926.416.29 CFR Ch. XVII (7-1-94 Edition): (g) Use of equipment. (1) Work on energized equipment. Only qualified persons . . . familiar with the proper use of special precautionary techniques, personal protective

equipment, insulating and shielding materials, and insulated tools. • SEE OUR ILLUSTRATED PRICE LIST FOR COMPLETE DETAILS.

TORQUEWRENCHESInsulated torquewrenches for tighten-ing critical connectionson bus bars, batteryracks, and power dis-tribution panels.“Click-style” withan audible clickand feel impulse;documentedrepeatable accu-racy of +/-4%,these tools pro-vide the assur-ance thatdesign andmanufactur-er torquerequire-ments willbe main-tained.

RATCHETSAvailable in deep drive and1/4” 3/8” & 1/2” drive

EXTENSION BARSStandard End & Flared End3/8” drive in 6 & 12” lengths1/2” drive in 5 & 10” lengths

TORQUE SCREWDRIVERRange: 2-36 in. lbs.

HEX BIT SOCKETS3/8” drive from1/4” to 7/16and 1/2” drivefrom 5/16” to1/2”

FIBERGLASS EXTENSION BARSCustom made extension bars with a fiberglass shaft,completely removes end to end continuity. Fully insu-lated to provide bump protection for the metal endfittings. The units have been torque tested to 80 ft.lbs. and are rated for a maximum safe use of 60 ft. lbs.

SOCKETSAvailable in two styles: STANDARD –Requires the use of an extension barFLUSH FIT – Attaches directly to ratchetor torque wrench• Specify 6 or 12 point sockets• Metric Sets • Custom Sets• 3/4” & 1” SD available as special order


16 •

INSULATING GLOVESJOB SAFETY FITS LIKE A GLOVE.

Insulating rubber gloves are the first line of protection against electrical shock.Class 00, 0, 1 and 2 gloves are available in a full range of sixes to comfortably fit mostemployees. In accordance with OSHA Standard 1910.137(b)(2)(xii) Cementex Certifiesthat all gloves are dielectrically tested at time of sale. OSHA also requires gloves bedielectrically tested every 6 months.

GLOVE KITS CONSIST OF PROTECTORS, GLOVES AND CARRY BAG.

Also, available are Glove Inflators, Cotton Liners, Talcand Dielectric Testing and Retesting Service.

Daily use of a Cementex Glove Inflator will keep youincompliance with OSHA 1910.137 which states, in part, . . .“Insulating equipment shall beinspected before each day’s use andimmediately following an incidentthat can reasonably be suspected ofhaving caused damage. Insulatinggloves shall be given an air test,along with the inspection.”

CLASS 00Low Voltage500V Max

CLASS 0Low Voltage1000V Max

CLASS 1High Voltage7500V Max

CLASS 2High Voltage17500V Max

• CHECK OUR ILLUSTRATED PRICE LIST FOR DETAILS


• 17

P.P.E.PROTECTING YOUR MOST IMPORTANT ASSETS – PERSONNEL.

SLEEVES

HOT STICKSTelescoping Hotsticks,Clampsticks, ADA“Shotgun Stick”,Universal Hot Sticks,Rescue Hooks andSwitching Sticks arealso available.

VOLTAGE DETECTORSVoltage Detectors (240V to230kV or 500kV) with case andshotgun adapter are in stock.Has multiple switch selection

voltage ranges with audibleand visual indication of

live voltage. Includes 3standard Alkaline C cellbatteries.

BLANKETS & ACCESSORIES

Available from stock . . . a full line of insulating rubbersleeves and kits in Class 0, 1 and 2 as well as sleeve acces-sories including storage bags.

Also, available are insulating rubber blankets and kitsin Class 0, 2 and 4 along with accessories. This includes ARCSuppression Blankets, Shielding Material Kits and SwitchBoard Matting in dimensional sizes or rolls up to 36 inchesby 150 foot in length.

Blankets and sleeves are all dielectrically tested at thetime of sale and in accordance with OSHA Standards mustbe retested every 12 months. This service is available fromCementex.

• SEE OUR ILLUSTRATED PRICE LIST FOR FULL DETAILS.

ARC SUPPRESSION BLANKETS


18 •

PROTECTIVE CLOTHING

12 cal/cm 2 ARC SHIELD

ARC FLASH PROTECTION

DUFFEL BAGS

25 cal/cm2

40 cal/cm2

15 cal/cm 2

Parka & Bib Overalls

Standard or Deluxefor ARC Flash Kits,Storage Bags for Gloves, Sleeves &Hotsticks

ALL “TASK-WEAR” IS AVAILABLE IN KITS (WITH OR WITHOUT GLOVES) AND INDIVIDUAL COMPONENTS.

The industries most complete offering of superior quality safety “Task-Wear.” Kits include: waist length parka, bib overalls with easy emergency access, hood with replaceable face shield, gloves and storage bag. Specify glove size when ordering.

COOLING VESTFor use with ARC flash suits.


• 19

FLAME & FLASH RESISTANT WORK CLOTHES. YOUR DRESS CODE FOR SAFETY.

50 cal/cm2

65 cal/cm2

100 cal/cm2100 cal/cm2

Ballistic

DIELECTRIC FOOT WEAR

FLAME RESISTANTCLOTHING

Overshoes, Boots and Ankle High, Deep Heel Overshoes

OSHA 1910.355 2-1,3,3,3 Protective Clothing and PPE for Application with a Flash Hazard Analysis etc. states that a flashhazard analysis shall determine, and the employer shall document, the incident energy exposure of the worker (in caloriesper square centimeter). This incident energy exposure level shall be based on the working distance of the employee’s face

and chest areas form a prospective arc source for the specific task to be performed.

In 6 Cal Nomex IIIA by DuPont or 11 Cal Indura Ultra Soft by Westex


For almost 50 yearsCementex has taken greatpride in supplying the indus-try with the highest qualitydouble-insulated 1000V safe-ty hand tools and personnel protectiveequipment.

Our full line of productsare specially designed, engi-neered and tested to keep your greatest assets,people and property, safe.

Make Cementex your tools of choice, with the highest standard of safety in your hands.

For almost 50 yearsCementex has taken greatpride in supplying the indus-try with the highest qualitydouble-insulated 1000V safe-ty hand tools and personnel protectiveequipment.

Our full line of productsare specially designed, engi-neered and tested to keep your greatest assets,people and property, safe.

Make Cementex your tools of choice, with the highest standard of safety in your hands.

OUR 3 DECADES OF INNOVATIONS IN TOOL SAFETY

ARE NO ACCIDENT.

OUR 3 DECADES OF INNOVATIONS IN TOOL SAFETY

ARE NO ACCIDENT.

PRODUCTS INC.

SINCE 1956

PRODUCTS INC.

SINCE 1956

Newman Tools Inc.185 Iber Rd.Ottawa, Ontario, Canada K2S 1E7tel 1-800-465-1384, fax 1-800-605-2442

Documents

CEMENTEX PUTS THE HIGHEST STANDARD OF SAFETY IN YOUR …