One source. One proven solution. CRC-Evans is the industry’s largest manufacturer ofpipeline construction equipment. Designed in-house toprecise customer specifications, our welding machines,pipe bending equipment, end prep equipment, clamps,padding/crushing equipment, weighting systems, andlaybarge equipment have been used to complete morethan 60,000 miles of pipeline in more than 100 countries.

CRC-Evans builds today’s most comprehensive line ofonshore and offshore pipeline construction equipment.All equipment is manufactured within a QualityManagement System certified to the internationallyrecognized ISO 9001:2008 standard and CRC-Evans’own Quality Policy.

For pipe from 16” (406mm) to 30” (762mm). CRC-Evansstate-of-the-art bending machines.

Outboard cylinder travel is now 68% faster than ourstandard machine (increase due to improvement tohydraulic system design).

Bending cylinder force is now 39% greater thanstandard machine (due to increased cylinder size andhigher pressure rating).

A stronger, re-engineered frame offers increasedbending capacity.

New diesel engine designed for rugged dependabilityin all weather conditions. Engine support, containsdiesel fuel tank and batteries for easy access

New hydraulic system has a larger hydraulic tank.

Engine and air compressor platform (air compressoroptional) are now side-mounted, lowering center ofgravity and greatly increasing stability.

Cover on the engine to reduce its noise level.

Stiff back and tongue have been re-engineered toallow for mandrel storage.

Optional two-stage pump.

Optional Mandrel operation: Pneumatic Mandrel with 3 section valve Hydraulic Wedge Mandrel with 5 section valve

Centurion Pipe Bending Machine 16-30”

CRC-Evans Pipeline Equipment

General Data

ENGINE UnitsMfg CAT-PerkinsModel 1144PTNet Power 100/74.5 hp/kWSpeed 2,200 rpmNo of Cylinders 4Bore x Stroke 4.1x5.0/105x127 inch/mmDisplacement 269/4.4 cu.inch/lFuel Tank Capacity 80/302 gal/l

HYDRAULIC UnitsPump Type Fixed VolumeMaximum Flow 41/155 gpm/lpmOperating Pressure 3,000/207 psi/BarValve Type ManualNo. Sections 3 or 5Relief Valves 5 + 1 Total

System ReliefFiltration 10 MicronHyrd. Tank 60/227 gal/l

WINCH UnitsType PlanetaryDrive HydraulicPulling Force 15,000/66 Lbf/kNCable Diamter 0.563/14 inch/mm

ELECTRICAL UnitsVoltage 12 VDCNo. Batteries 1Total Rating 190 Amp Hr @ 20 FAlternator 75 Amp Starter 3 kW

UNDERCARRIAGEType Track 15 ton

HYDRAULIC UnitsOutboardBore 10/254 inch/mmStroke 19.25/489 inch/mmQty. 2

InboardBore 7/179 inch/mmStroke 5/127 inch/mmQty. 2

Pin UpBore 6/152 inch/mmStroke 23/584 inch/mmQty. 1

HYDR. MANDREL CONNECTIONSQty. 4Size 3/4”

AIR COMPRESSOR UnitsOutput 29.2/827 acfm/lpmPressure 200/13.6 psi/BarDrive Type Hydraulic

Available with or without air compressor

Control Panel 16-30”

A cell marked with a dash [-] represents the ability tobend up to 2.00 inch thick. For Wall thickness greaterthan shown, please contact CRC-Evans.

Figures are recommendations only and do notconstitute a warranty.

All bends shown include the use of CRC-Evansbending mandrels. Figures given are “average” and will vary due to:

The wall thickness of the pipe. Actual (as opposed to nominal) yield of thepipe.

Skill of the operator handling the bendingmachine and mandrel.

Origin of pipe (pipe mill, plate mill, etc.) andquality of pipe.

Type of die and/or bending set being used (e.g., polyurethane lining or special radius dies).

An unbent end (tangent) is produced at eachend of the pipe where the pipe contacts the stiffback. Normal unbend tangent for PB 16-30 is 6feet.

Notes Bending Tables:

Pipe Bending Data [Metric]

406mm - 762mm (CENTURION) PIPE BENDING DATA - ALL DIMENSIONS IN MILLIMETERS.

Based on 85% efficiency and maximum strength.

Pipe Bending Data [Imperial]

16” - 30” (CENTURION) PIPE BENDING DATA - ALL DIMENSIONS IN INCHES.

Based on 85% efficiency and maximum strength.

NominalMaximum Wall Thickness by Grade Recommended BendPipe OD

mm X52 X60 X65 X70 X80 x100 Degree Arc Radius Max degree per (per meter) (meters) 12 meter joint

406 - - - - - - 4.90 11.58 42.22

457 - - - - - - 3.60 15.85 30.85

508 - - - - - 41.02 2.90 19.51 25.07

559 - - - 48.62 42.22 33.39 2.60 21.95 22.28

610 - 47.37 43.54 40.27 35.00 27.73 2.50 23.16 21.11

660 46.33 39.86 36.65 33.92 29.52 23.43 2.30 24.99 19.56

711 39.50 34.02 31.31 28.99 25.25 20.07 2.10 26.82 18.23

762 34.11 29.41 27.07 25.08 21.86 17.40 2.00 29.26 16.71

NominalMaximum Wall Thickness by Grade Recommended BendPipe OD

inch X52 X60 X65 X70 X80 x100 Degree Arc Radius Max degree per (per foot) (feet) 40 foot joint

16 - - - - - - 1.51 38.00 42.22

18 - - - - - - 1.10 52.00 30.85

20 - - - - - 1.615 0.90 64.00 25.07

22 - - - 1.914 1.662 1.314 0.80 72.00 22.28

24 - 1.865 1.714 1.585 1.378 1.092 0.75 76.00 21.11

26 1.824 1.569 1.443 1.335 1.162 0.922 0.70 82.00 19.56

28 1.555 1.340 1.233 1.141 0.994 0.790 0.65 88.00 18.23

30 1.343 1.158 1.066 0.987 0.861 0.685 0.60 96.00 16.71

87.8 in2.23 m

100.1 in2.54 m

267.6 in6.8 m

17.7 in0.45 m

87.3 in2.22 m

Available at time of manufacture against additional costs.

Power units to customer specifications Electric motor Stationary base to replace undercarriage Cold weather operating kit (-40°C or F) Hydraulic-driven air compressor and tank tooperate pneumatic mandrel

Hydraulic-power takeoff for either a plugmandrel or wedge mandrel

Available at time of manufacture against additional costs.

Bending sets for out-of-range pipe Bending sets for specific coating Hydraulic-power takeoffs

Options Extra Attachments

Dimensions and Weights

DIMENSIONS Units

Length 267.6/6.80 inch/meterWidth 100.1/2.54 inch/meterHeight 87.8/2.23* inch/meter

WEIGHT Units

Shipping 28,730/13,029 lb/kgOperating 29,730/13,483 lb/kg

* Without air compressor. Optional air compressor changesthe unit overall height.

Houston: (832) 249-3100 Toll Free: (800) 664-9224 • Tulsa: (918) 438-2100Netherlands: +31-36-711-7500 • www.crc-evans.com

! Disclaimer

Although great care has been taken in compiling the information contained in this catalogue, CRC-Evans does not acceptresponsibility for the consequences of any errors, nor for the effects of any subsequent changes made by the various sources of data.

Dimensions and weights provided for reference only. Dimensions, specifications and weights can vary depending upon finalconfiguration of the equipment. Please contact CRC-Evans to confirm final weights and dimensions prior to shipment.