CENTURY S SP TC GT - Audiofanzine...Crest Audio’ Century Series makes use of two different power supplies. The model and frame size of your particular console determines which of

CENTURY SERIES

SP TC GT

OWNER’S MANUAL

Congratulations on your purchase of a Century Series console. All of us at Crest Audio in Paramus, NewJersey, USA, support your decision, knowing your console contains the finest combination of design andmanufacture in the industry.

While your new Century Series console is one of the most feature-packed available, great effort has beenput into making it simple to operate.

This manual explains the functions of your new console, how they operate and how they relate to eachother. If properly cared for, your new console will provide you with trouble-free, sonically accurate mixingclear into the next Century and beyond.

Please keep the following contact information on hand:

Crest Audio Customer Service Dept.100 Eisenhower Drive

Paramus NJ 07652 USATEL 201.909.8700 FAX 201.909.8744

http://www.crestaudio.com

Crest Audio Inc.100 Eisenhower Dr., Paramus NJ 07652 USA

TEL: 201.909.8700 FAX: 201.909.8744http://www.crestaudio.com

Printed in USA

Feature Overview 2A brief description of design, features and functions.

Wiring Conventions 3Contains diagrams indicating how connectors for Crest consoles are wired.

Power Supply 4A brief description of the rack-mountable Century Series consoles power supplies.

Power Connections 5A brief description of Crest console power connections.

System Connections 6Contains diagrams illustrating conventional system connections.

SP Input Module 8Profiles the SP input module.

TC Input Module 10Profiles the TC input module.

GT Input Module 12Profiles the GT input module.

GT Stereo Input Module 14Profiles the GT stereo input module.

SP/TC Group Module 17Profiles the SP/TC group module.

GT Group Module 18Profiles the GT group module.

Matrix Module 21Profiles the matrix module.

SP/TC Master Section 23Profiles the SP/TC master section.

GT Master Section 25Profiles the SP/TC master section.

Technical Information Appendix AIncludes dimensions, specifications, console access details,user options, console block diagram, and rear panel layout.

Glossary Appendix BThe specific details of console operation are described here.

Schematics Appendix CLists available schematics for SP/TC/GT Console Modules & Power Supply

TABLE OF CONTENTS

Feature OverviewThe SP / TC / GT features listed beloware common to all Century Series Consoles.

• SSM/PMI High quality preamplifiers on balanced micro-phone/line inputs and on all balanced outputs for uncompro-mised audio quality and reliability. All IC’s within the audiopath are socket mounted for easy upgrade or service.

• 48 Volt switchable phantom power on all microphone inputs.

• Optional transformers available on all microphone inputs andon Group, Left/Right, Mono, and Matrix outputs.

• Full Bus assignment section on input and group sectionsallow for independent assignment to the Mono Clean Bus inaddition to the Stereo and sub group sections of the console.The Mono Clean Bus allows for any input or return signal tobe assigned to the Mono output without first having to passthrough a group.

• Dynamic Signal Present and multiple-sample-point peak indi-cator LED’s are used on all input sections of the console aswell as on all primary outputs.

• Mono/Stereo PFL and AFL system. When a stereo module isused, the signal is monitored in stereo while mono modules aremonitored in mono. Selected outputs may be monitored inmono or as stereo pairs.

• 8 Auxiliary Mix buses for use as effect and monitor sends.Aux Send circuitry has front panel Pre/Post fader switching.Pre fader signals have internal jumpers to select between a PreEQ or post EQ signal (Standard) source.

• Standard frame sizes include 24, 32, 40, 44 and 52 position,with a 64 position frame available on special order. Consolesmay be ordered as 4 subgroup (8 Module Positions usedincluding Master Section) or 8 subgroup (12 Module Positionsused including Master Section) versions.

• Any frame size may be ordered short loaded for later expan-sion.

• Direct access to Group Mix Bus allows expander mixers tobe easily patched into the console.

• Full facility return sections includes Gain Control to handle awide range of input levels, High and Low frequency EQ, AuxSends, full Bus assignment section and level, pan, PFL andMute controls.

• Mute system on input channels is designed to mute both pre-and post-fader signals including those Aux sends used as mon-itors. When muted, PFL circuitry, Peak and Dynamic SignalPresent LED indicators remain fully operational. This is a fea-ture not available on many consoles at any cost.

• External power supply with optional shared load parallelpower supply for uncompromised reliability.

• The EQ section includes an EQ IN switch with LED and a80Hz High Pass filter switch.

• Optional Matrix modules available.

• Optional Stereo Input modules available.

• Comprehensive Talkback section allows access to all primaryconsole outputs. Additional access provided to an externallocation such as an on-stage monitor mixer system. Externalsignals can also be assigned into the talkback system includingOscillator and Pink Noise source inputs.

• Left/Right summing switches to Aux 1-2 and Aux 3-4 allowfor simple setups of overdub mixes by allowing Left/Right sig-nals to be blended with Auxiliary mixes when used in record-ing applications. In contracting applications, this feature allowsthese Aux outputs to act as additional distribution amplifiersfor the Left/Right signals.

SP / TC / GT CENTURY SERIES

PAGE 2

SP / TC / GT

PAGE 3

CENTURY SERIES

12

3

PIN 1 = GROUND

PIN 2 = POSITIVE

PIN 3 = NEGATIVE

OUTPUT XLRINPUT XLR

PIN 3

PIN 1

PIN 2PIN 3

PIN 2

PIN 1

TIP - POSITIVE

RING - NEGATIVE

SLEEVE - GROUND

INPU

T

TIP - SEND

RING - RETURN

SLEEVE - GROUND

INSER

T

TIP - POSITIVE

RING - GROUND

SLEEVE - GROUND

OU

TPU

T

Input Plug Polarities Insert Plug Polarities

Output Plug Polarity - TRS

TIP - POSITIVE

SLEEVE - GROUND

OU

TPU

T

Output Plug Polarity - Tip/Sleeve

Wiring ConventionsSince the same connectors are used throughout the professional audio industry, it is important to know how the connectors forCrest’s Century SP, TC, and GT consoles are wired. The wiring is as follows.

SP / TC / GT

PAGE 4

CENTURY SERIES

Century Series Console Power SupplyCentury Series Consoles use a separate rack-mountable power supply which provides the specific voltages used by each console.Crest Audio’ Century Series makes use of two different power supplies. The model and frame size of your particular consoledetermines which of the two supplies should be used. SP, TC, and GT consoles use power supplies as follows: Consoles withframe sizes of 24 or 32 modules use supply model XCVA04; consoles with frame sizes of 40, 44, 52, or 64 modules use supplymodel XCVA06.

Power Supply

C O N S O L E S

+20V

-20V

+48V

+24V

Press to Reset

4AON

Designed & manufactured in the USA by:

A division of Crest Audio Inc.100 Eisenhower Dr.

Paramus, New Jersey 07652 USA

POWER OUT

POWER OUT

RISK OF ELECTRIC SHOCKDO NOT OPEN

CAUTION

AVIS : RISQUE DE CHOC ÉLECTRIQUE—NE PAS OUVRIR

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOTEXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

ATTENTION! POUR ÉVITER LE RISQUE D'INCENDIE OU DE CHOCÉLECTRIQUE, NE PLACEZ PAS CET APPAREIL SOUS LA PLUIE OU Á

L'HUMIDITÉ

67

2 145 3

Pin 1 +24VPin 2 +20VPin 3 AnalogPin 4 AnalogPin 5 DigitalPin 6 +48VPin 7 -20V

CONSOLEGROUND

CHASSISGROUND

MAXIMUM AC IN:XCVA04: 415 WATTSXCVA06: 825 WATTS

+ 48V @ 1+ 24V @ 6± 20V @ 6

Model XCVA06

Model XCVA04± 20V @ 4+ 24V @ 4

S/N

Supply IdentificationThe type of power supply can be identified by the model num-ber shown on the back of the chassis and panel label..

Power RequirementsThe Century Series power supplies have certain electricalrequirements to operate properly. If possible the power supplyshould be connected to a dedicated circuit. Should any otherappliance on the same circuit draw enough current to overloadthe circuit, the breaker or fuse will trip causing loss of powerto the console. Note the maximum current draw specificationsat right. Be sure that the circuit to which you connect the sup-ply can handle the draw. The power switch on the supply front panel is also a circuitbreaker, there is no power fuse. Should the supply ever shutdown, or trip at start up, simply push the switch to the off posi-tion and then on again.

Ground LinkingSafety Considerations -Each new power supply is shipped with the AC third wireground connected to the console chassis ground. The connec-tion is made at the rear of the power supply unit. This is neces-sary for safety reasons so that exposed metal parts are ground-ed. In the event of a live conductor making contact with theconsole chassis or the power supply chassis then the currentwill flow to ground without a safety hazard arising. Note thatwhen the console is disconnected from the power supply thechassis ground connection to AC third wire ground is brokenand safety protection is lost. For uninterruptible grounding, ina fixed installation for example, make a connection directly tothe console chassis from the safety ground. Disconnect theground link on the rear of the power supply. This disconnectsconsole ground from power supply AC third wire groundwhich would otherwise create a hum-loop.

Twin Supply OperationWhen twin supplies are in use for automatic back-up, then theground links on both supplies should be fitted. In a situation where the safety ground to the console chassishas been connected and the ground path via the power supplyis causing a hum-loop, then disconnect the ground links onBOTH power supplies.

Console and Power Supply GroundingConsole chassis ground is electrically connected to audioground, pin 1 of XLR connectors and 1/4" sockets and to theterminal 'CONSOLE GROUND' at the rear of the power sup-ply. The AC third wire connection in the power supply cableconnects the metal chassis of the power supply to safetyground. This connection should never be disturbed. Hazardousvoltages exist inside the power supply which require the caseto be grounded. When rack-mounted, the power supply groundmay transfer to the rack case thru the front fixing screws,though this connection is not reliable. When a console is con-figured within a complete sound system the grounding require-ments may call for the ground link to be disconnected. This ispermissible only when an alternative ground path has beenprovided. If in doubt seek the advice of an experienced electri-cal engineer.

+48V @ 1A+24V @ 6A±20V @ 6A

Model XCVA06

Model XCPS-40±20V @ 4+24V @ 4

S/N

Power SupplyModel

XCVA04XCVA06

Max CurrentDraw @ 120V

7 Amps9 Amps

Max CurrentDraw @ 240V

4 Amps5 Amps

Serial Number Tag

Model Number

SP / TC / GT

PAGE 5

CENTURY SERIES




POWER OUT

POWER OUT


CAUTION




L'HUMIDITÉ

67

2 145 3


CONSOLEGROUND

CHASSISGROUND


+ 48V @ 1+ 24V @ 6± 20V @ 6

Model XCVA06

Model XCVA04± 20V @ 4+ 24V @ 4

S/N




POWER OUT

POWER OUT


CAUTION




L'HUMIDITÉ

67

2 145 3


CONSOLEGROUND

CHASSISGROUND


+ 48V @ 1+ 24V @ 6± 20V @ 6

Model XCVA06

Model XCVA04± 20V @ 4+ 24V @ 4

S/N

To AC Mains

To AC Mains

Interface Cable

To Console

Power ConnectionsThe connections to and from the power supply vary dependingon your specific configuration. Before setting up the console,always check to make sure the AC voltage marked on thepower supply agrees with the local supply. Always connect theconsole to the power supply before switching on the powersupply. Do not run the power supply if it is not connected tothe console.

Multiple power supplies can be daisy-chained to provide fail-safe protection in the event of a supply failure. When two ormore supplies are used, both power supplies run all the time. Inthe event of supply failure, the remaining power supply(s) willtake over the entire load.

NOTE: Although both of the multi-pin connectors on the backof the power supply are labeled “POWER OUT”, it is neces-sary (and acceptable) to link two power supplies together asshown in the diagram below.

ADDITIONAL NOTE: The multi-conductor cable used forpower supply-to-power supply connection is different than thatused for a conventional power supply-to-console connection,and must be specified when the second power supply isordered.

Ground Link

SP / TC / GT

PAGE 6

CENTURY SERIES

System ConnectionsThe console is the hub of a sound system and because it controls most of the variables within a system, proper connection andcomponent relationships are vital to assure accurate operation and results. The following diagrams illustrate conventional systemconnections.

CENTURY

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

CENTURY

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

Balanced Mic Inputs

External MixerInput via Group Bus In

Balanced Line Inputs

Input Processing,via Input Module

Insert Send and ReturnConnections

Keyboards,Samplers,

Drum Machines

Input Connections

SP / TC / GT

PAGE 7

CENTURY SERIES

Signal Processors

In

Out

From Aux 5-8 out

To effects returns

Aux 1-4 out tomonitor amplifiers

EXT TB IN

LEFT INSERTRIGHT INSERT

MONO OUT

MONO INSERT

MATRIX A OUT

INSERT A

RIGHT OUT LEFT OUT

MONITOR L OUTMATRIX B OUT AUX 3 OUT AUX 1 OUT

INSERT B MONITOR R OUT AUX 4 OUT AUX 2 OUT

STR PGM IN AUX 7 OUT AUX 5 OUT

AUX 8 OUT AUX 6 OUTOSC/PINK IN

EXT TB OUT

GROUP OUT

EFX RETURN

-10

+4

BUS IN

GROUP OUT

EFX RETURN

-10

+4

BUS IN

GROUP OUT

EFX RETURN

-10

+4

BUS IN

GROUP OUT

EFX RETURN

-10

+4

BUS IN

GROUP OUT

EFX RETURN

-10

+4

BUS IN

Master Groups

GROUP INSERTGROUP INSERTGROUP INSERTGROUP INSERTGROUP INSERT

CENTURY

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

10

0

5

10

20

30

15

40

60

From LocalMonitor Out

Local Monitor L Local Monitor R

Left Out Right OutCenter

Out

Input ChannelDirect Outs

feed to remotemixer/recorder

Matrix Outputsto remote

location, mixer,or recorder

Headphone Outputs:1 under armrest,

1 in Master Module

Ch B

-1

0dB

-3-6

-10

-15

-30

-80Ch A

-1

0dB

-3-6

-10

-15

-30

-80

8001 Professional Power Amplifier

Clip/Limit

Signal

Temp/DC

Active

Ch B

-1

0dB

-3-6

-10

-15

-30

-80Ch A

-1

0dB

-3-6

-10

-15

-30

-80


Clip/Limit

Signal

Temp/DC

Active

Clip/Limit

Signal

Temp/DC

Active

Ch B

-1

0dB

-3-6

-10

-15

-30

-80


Ch A

-1

0dB

-3-6

-10

-15

-30

-80

Aux Connections

Output Connections

SP / TC / GT

PAGE 8

CENTURY SERIES

SP Input ModuleThe SP input module is the most straightforward of theCentury Series. While it shares many features with morecomplex input modules, the SP input module is simple indesign and operation.

LINE SwitchSelects between the Balanced XLR Microphone Input con-nector and the Balanced Line Input 1/4" TRS connector.

48V Phantom Power SwitchTurns on 48V Phantom Power, required by certain micro-phones for proper operation.

PAD SwitchIntroduces a -15 dB attenuation to the mic input signal.

GAIN ControlAdjusts input gain for proper signal level.

80Hz High Pass SwitchReduces all low frequency content at a 12db per octave ratereferenced to 80Hz (-3db point).

Four Band Fixed EqualizerControls the cut or gain of four fixed frequencies (10 kHz,2.7kHz, 300Hz, 80Hz) within the input signal only when theEQ IN switch is depressed.

EQ IN SwitchInserts the EQ section into the input channel signal. An asso-ciated LED illuminates when the switch is down.

AUX Level 1•3 / 2•4Adjusts audio level of a mix for use as a monitor or an effectsend. The signal source for this mix may be selected pre orpost fader by an associated switch.

AUX ASSIGNMENT 3•4 SwitchSelects the first two Aux level controls between the Aux 1•3mix bus and the Aux 2•4 mix bus.

POST/PRE SwitchSelects the Aux 1•3 and Aux 2•4 signal sources between postand pre fader positions.

AUX 5 - 8 Individual Level ControlsAdjusts audio level of a mix for use as a monitor or an effectsend. The signal source for these mixes may be selected preor post fader by an associated switch.

PRE/POST SwitchSelects the Aux 5 through 8 signal sources between pre andpost fader positions.

PAN CONTROLPositions the channel image between the left (odd) and right(even) channel assignment.

MUTE Switch with LEDMutes the channel and all send functions. This switch doesnot affect the PFL switch or the Peak and Signal Present LEDindicators, The LED illuminates when the channel is mutedfrom the local mute switch.

+48V

LINE

80

EQ IN

POST

3•4

PRE

5

6

7

8

PAN

AUX SENDS

PAD

1•3

2•4

GAIN20

10

6

30

60

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

8

16

- 0 +

8

16

LF

8

16

- 0 +

8

16

LM

8

16

- 0 +

8

16

HF

8

16

- 0 +

8

16

HM

POST

3•4

PRE

MUTE

MONO

1 - 2

3 - 4

5 - 6

7 - 8

PFL

PEAK

SIG

5

6

7

8

PAN

AUX SENDS

0

5

10

30

40

20

L - R

1•3

2•4

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1

SP / TC / GT

PAGE 9

CENTURY SERIES

MONO Bus Assign SwitchAssigns the post-fader input signal directly to the Mono Cleanbus.

Bus Assign Switches (L/R, 1-8)Assigns the post Pan Signals to the mix bus in odd/even pairs.Pan controls assignment between these two mix buses withextreme left pan assigning signal exclusively to the odd mixbus and extreme right pan assigning signal exclusively to theeven mix bus. When the pan is in its center position, signal isfed equally to the odd (left) and even (right) mix bus. Whenused in stereo applications, the channel signal may be locatedanywhere within the stereo image as controlled by the Pan con-trol.

PFL SwitchSamples the channel’s signal pre-fader and allows for monitor-ing within the master section of the console. This signal is notaffected by the Mute Switch. When depressed, the signal levelcan be seen on the Left/Right meters, and heard via the mixer’sheadphone or local monitor output. When this PFL Switch isdepressed, the channel PEAK LED indicator illuminates at alower intensity. When used as a status indicator of switch posi-tion, the Peak LED indicating circuit remains fully operationalby illuminating at a much higher intensity than its use as a PFLstatus indicator.

PEAK LED IndicatorIlluminates RED when any of the points monitored come with-in 3db of the clipping point. Signal is sampled after the inputpreamplifier stage, after the EQ section, and after the fader.

This LED also serves as a PFL ON indicator, but at a muchlower intensity than when it is used to indicate clipping.

SIGNAL PRESENT LEDConstantly displays level activity of the input channel by vary-ing in intensity.

100mm FaderUsed for control of all outputs of the channel except those Auxoutput sections selected by switch to a pre fader position. (TheInsert Output level is not affected by the fader position.)

Rear ConnectionsDirect OutThis jack provides the direct output signal(post fader & post mute) from the associat-ed input channel.

InsertThis jack allows for the insertion of aneffect or signal processor into the audio pathof the associated input channel.

Bal Line InThis jack accepts balanced and unbalancedline level inputs and delivers it into theassociated input channel.

Bal Mic InThis connector accepts balanced micro-phone inputs for the associated input chan-nel.

BAL LINE IN

DIR OUT

INSERT

BALMIC IN

SP / TC / GT

PAGE 10

CENTURY SERIES

TC Input ModuleThe TC input module is the intermediate input module in theCentury Series. It is essentially the same as the SP except forthe sweepable mids on the EQ section and a polarity reverseswitch.





Polarity Reverse SwitchInverts the polarity of both the microphone and line inputs.


HF Equalizer ControlBoosts or cuts high frequency content at 10kHz.

MID EQ Level and Sweep ControlsControl the degree of boost or cut of Mid Frequency contentand reference frequency. The outer knobs control the centerfrequency which is variable between the frequencies printedon the chassis. The inner knob adjusts the boost or cut.

LF Equalizer ControlBoosts or cuts low frequency content at 80Hz.







250

100

400

1

2K

+48V

LINE

80

EQ IN

POST

3•4

PRE

HM

LM

5

6

7

8

AUX SENDS

PAD

1•3

2•4

GAIN20

10

6

30

60

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1K

400

1.5

63

8K

Ø

8

16

- 0 +

8

16

LF

8

16

- 0 +

8

16

HF

POST

3•4

PRE

MUTE

MONO

1 - 2

3 - 4

5 - 6

7 - 8

PFL

PEAK

SIG

5

6

7

8

PAN

AUX SENDS

0

5

10

30

40

20

L - R

1•3

2•4

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1

SP / TC / GT

PAGE 11

CENTURY SERIES


MUTE Switch with LEDMutes the channel and all send functions. This switch does notaffect the PFL switch or the Peak and Signal Present LED indi-cators. The LED illuminates when the channel is muted fromthe local mute switch or mute scene masters.

MONO Bus Assign SwitchAssigns the post-fader input signal directly to the Mono Cleanbus.






100mm FaderUsed for control of all outputs of the channel except those Auxoutput sections selected by switch to a pre fader position. (TheInsert Output level is not affected by the fader position.)





BAL LINE IN

DIR OUT

INSERT

BALMIC IN

GT Input ModuleThe GT input Module is the most feature-filled within theCentury Series. Designed for demanding FOH applications,the GT Series retains the simplicity of the whole CrestConsole line while offering all the features of a high-end unit.






Polarity Reverse SwitchInverts the polarity of both the microphone and line inputs.

PEAK/SHELVE HF SwitchUsed for switching the high frequency EQ between the nor-mal shelving setting to a peak setting.

Four-Band Sweep Equalizer ControlsThere are two knobs for each of the four bands. The outerknobs control the center frequency which is variable betweenthe frequencies printed on the chassis. The inner knob adjuststhe boost or cut. The center frequencies are printed on thechassis around the outer knob.

PEAK/SHELVE LF SwitchUsed for switching the low frequency EQ between the nor-mal shelving setting to a peak setting.






SP / TC / GT

PAGE 12

CENTURY SERIES

100

40

150 3

6

800

250

100

400

1

2K

+48V

LINE

PEAK

PEAK

80

EQ IN

POST

3•4

PRE

AUX 8DIRECT

HM

LM

5

6

7

8

AUX SENDS

PAD

1•3

2•4

HF

LF

GAIN20

10

6

30

60

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

3

2K

410

20K

1K

400

1.5

63

8K

Ø

POST

3•4

PRE

AUX 8DIRECT

MUTE

MONO

1 - 2

3 - 4

5 - 6

7 - 8

PFL

SCENEMUTESELECT

A

B

C

D

PEAK

SIG

5

6

7

8

PAN

AUX SENDS

SAFE

0

5

10

30

40

20

L - R

1•3

2•4

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1

SP / TC / GT

PAGE 13

CENTURY SERIES

Aux 8 Direct SwitchRemoves the Aux 8 signal from the Aux 8 bus and assigns tothe direct out 1/4" connector on the rear panel.



MUTE Switch with LEDMutes the channel and all send functions. This switch does notaffect the PFL switch or the Peak and Signal Present LED indi-cators. The LED illuminates when the channel is muted fromthe local mute switch.

MONO Bus Assign SwitchAssigns the input signal directly to the Mono Clean bus.






100mm FaderUsed for control of all outputs of the channel except those Auxoutput sections selected by switch to a pre fader position. (TheInsert output level is not affected by the fader position.)

Scene Mute AssignmentsAssign the input channel to any of the four scene mute groups.Scene mute combines with the module’s local mute button, andactuates the local mute LED.

Scene Mute Safe SwitchDisables any selected scene mute assignments. An associatedgreen LED indicates the channel is in a safe state.





BAL LINE IN

DIR OUT

INSERT

BALMIC IN

GT Stereo Input ModuleThe GT Stereo Input Module is essentially two GT InputModules fit into one module space. This module is very use-ful for accepting remote feeds, effects inputs and other sig-nals that require stereo handling.

48V Phantom Power SwitchTurns on 48V Phantom Power for both L and R XLR inputs,required by certain microphones for proper operation.

LINE SwitchSelects between the Balanced XLR Microphone Input con-nector and the Balanced Line Input 1/4" TRS connector forboth L and R channels.

XLR PAD SwitchIntroduces a -20 dB drop to the mic input signal for both Land R XLR inputs.

L GAIN & R GAIN ControlsAdjusts input gain for proper signal level for both L and Rinputs.

80Hz High Pass SwitchFor both input channels, reduces all low frequency content ata 12db per octave rate referenced to 80Hz (-3db point).

Polarity Reverse SwitchFor both input channels, inverts the polarity of both themicrophone and line inputs. An internal jumper selectsbetween Left channel only or both Left & Right channels.

Three-Band Equalizer ControlsThe equalization controls in this module act upon both L andR stereo channels at once. The upper band is a fixed shelvingEQ with one control knob. The middle and low frequency EQbands are set up as sweep EQ’s: the lower knob controls thegain or cut as in the fixed EQ; while the upper knob controlsthe center frequency adjusted by the inner knob. These centerfrequencies are printed on the chassis around the upper knob.

EQ IN SwitchInserts the EQ section into both L and R input channel sig-nals at once. An associated LED illuminates when the switchis down.

AUX Level 1•3 / 2•4Adjusts audio level of a mix for use as a monitor or an effectsend. The signal source for this mix may be selected pre orpost fader by an associated switch. The left channel is sent tothe odd Auxes, and the right channel is sent to the evenAuxes.


STEREO SwitchAUX 5-8 Individual Level Controls normally send a summed(L+R) signal to the AUX outputs. When the STEREO switchis depressed, AUX 5 and 6 become a ‘right’ send and ‘left’send respectively. This can be used for a stereo effects send.

SP / TC / GT

PAGE 14

CENTURY SERIES

+48V

LINE

80

EQ IN

STEREO

POST

5

6

7

8

XLRPAD

1•3

2•4

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

Ø

WID

REVSTR

MONO

16 16

8 8

O +

16 16

8 8

O +

HF

LF

100

40

150 300

6

1K

600

300

1K 3

5

8K

3

1K

5 10

15

20K

16 16

8 8

O +MID

GAIN20

10

6

30

60

20

10

6

30

60

STEREO

POST

MUTE

MONO

1 - 2

3 - 4

5 - 6

7 - 8

PFL

SCENEMUTESELECT

A

B

C

D

PEAK

SIG

5

6

7

8

SAFE

0

5

10

30

40

20

L - R

1•3

2•4

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1

BAL

WID

REVSTR

MONO

AUX 5 - 8 Individual Level ControlsAdjusts audio level of a mix for use as a monitor or an effectsend. The signal source for these mixes may be selected pre orpost fader by an associated switch.

WID(TH) ControlWhen used together with the BAL control, the WID controlprovides a unique way to configure stereo panning. Whenturned all the way counter-clockwise, this control convention-ally assigns the left signal to the left (odd) channel assignment,and the right signal to the right (even) channel assignment.When adjusted to the ‘twelve o’clock’ position, left and rightsignals are panned straight up the middle, effectively summingthem to mono. When this knob is turned all the way clockwise,the left and right signals are ‘flip-flopped’, left being assignedto the right (even) side, and the right side being assigned to theleft (odd) side.

BAL ControlPositions the entire channel image between the left (odd) andright (even) channel assignment. Together with the WID con-trol, this gives total control of the stereo image.

MUTE Switch with LEDMutes the channel and all send functions. This switch does notaffect the PFL switch or the Peak and Signal Present LED indi-cators. The LED illuminates when the channel is muted fromthe local mute switch.

MONO Bus Assign SwitchAssigns the input signal directly to the Mono Clean bus.

Bus Assign Switches (L/R, 1-8)Assigns the post Pan Signals to mix bus in odd/even pairs. Pancontrols assignment between these two mix buses with extremeleft pan assigning signal exclusively to the odd mix bus andextreme right pan assigning signal exclusively to the even mixbus. When the pan is in its center position, signal is fed equallyto the odd (left) and even (right) mix bus. When used in stereoapplications, the channel signal may be located anywhere with-in the stereo image as controlled by the Pan control.


PEAK/PFL LED IndicatorIlluminates RED when any of the points monitored come with-in 3db of the clipping point. Signal is sampled after the inputpreamplifier stage, after the EQ section, and after the fader.



100mm FaderUsed for control of all outputs of the channel except those Auxoutput sections selected by switch to a pre fader position. (TheInsert output level is not affected by the fader position.)

Scene Mute AssignmentsAssign the input channel to any of the four scene mute groups.Scene mute combines with the module’s local mute button, andactuates the local mute LED.

Scene Mute Safe SwitchDisables any selected scene mute assignments. An associatedgreen LED indicates the channel is in a safe state.

Rear ConnectionsDirect OutThis jack provides the direct output signal(post fader & post mute) from the associatedinput channel.

InsertThis jack allows for the insertion of an effector signal processor into the audio path of theassociated input channel.

Bal Line InThis jack accepts balanced and unbalancedline level inputs and delivers it into the asso-ciated input channel.

Bal Mic InThis connector accepts balanced microphoneinputs for the associated input channel.

SP / TC / GT

PAGE 15

CENTURY SERIES

BAL LINE IN L

INSERT R

BAL MIC IN L

BAL MIC IN R

BAL LINE IN R

INSERT L

SP / TC / GT

PAGE 16

CENTURY SERIES

EFX RETURN

GROUP

GAIN

POST

3•4

1•3

2•4

LEVEL

MONO

1 - 2

3 - 4

5 - 6

7 - 8

L - R

PFL

PEAK

SIG

MUTE

+9

+6

+3

0

-3

-6

-9

-12

-15

-18

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

16 16

8 8

HF- 0+

16 16

8 8

LF- 0+

PAN

PAN

2

EFX RETURN

POST

3•4

3

2•4

MUTE

MONO

L - R

PFL

PEAK

SIG

10

5

10

30

40

20

LEVEL

PFL

PEAK

SIG

MUTE

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

PAN

PAN

2

2

SP / TC / GT

PAGE 17

CENTURY SERIES

SP/TC Group ModulesSince there are only minor differences between the SP and TCinput modules, these two models share the same group module.An eight bus console will have eight of these modules where afour bus console will only have four. The number of the groupis indicated on the PFL switch.

Group MeterMonitors the post-fader output of the group via a ten-segmentLED array.

Effect Return GainControls the gain on the signal returning from an attachedeffect.

Effect Return EQAlters the effect return signal pre-fader via two fixed-frequen-cy (10kHz and 80 Hz) controls.

Effect Return AssignmentsAssign the post-pan, post fader, effect return signal to the mixbus.

Effect Aux LevelsControls the level of effect return signal sent to Auxes 1-4.

Aux 3•4 SwitchSwitches the Effect Aux Levels between 1•2 and 3•4.

Pre/Post SwitchSelects the effect return signal between pre and post EffectLevel Control, for use with Aux's.

Effect PanAdjust the proportion of effect return signal being sent to theLeft (odd) and Right (even) mix buses.

Effect LevelAdjusts the final effect return signal level.

Effect MuteMutes the effect return signal.

Effect PFLAllows for Pre Fader Listening of the effect return signal.

Effect Peak & Signal LED’sThe red LED indicates that the effect signal is within 3dB ofthe clipping point. The green LED constantly displays the levelof signal activity by varying in intensity.

Group PanUsed to position group image between the Left and Right out-put assignments

Group MuteMutes the group signal, except for the group insert send.

Group AssignmentsAssigns the group signal to the Left, Right, and/or Mono out-puts.

Group PFLAllows for Pre Fader Listening of the group signal

Group Peak & Signal LED’sThe red LED indicates that the group signal is within 3dB ofthe clipping point. The green LED constantly displays the levelof signal activity by varying in intensity.

Group FaderControls the final output signal of the group.

Rear ConnectionsGroup OutThis connector carries the post-fader outputsignal from the associated group module.

Group InsertThis jack allows for the insertion of an effector signal processor into the audio path of theassociated group.

EFX ReturnThese two connectors allow for effect signalsto be brought back into the board. The 1/4"TRS jack accepts a balanced or unbalancedsignal at -10 dB level and delivers the signalto the EFX return section. The female XLRconnector accepts a balanced signal at +4dBlevel and delivers the signal to the EFXreturn section of the group.

GROUP INSERT

GROUP OUT

EFX RETURN

SP / TC / GT

PAGE 18

CENTURY SERIES

GT Group ModuleThe GT group module has many of the same features as theSP/TC group module. Primarily it is the Matrix Section andthe Scene Mute controls that separate this group module fromthe SP/TC. An eight bus console will have eight of thesemodules where a four bus console will only have four. Thenumber of the group is indicated on the PFL switch.

Group MeterMonitors the post-fader output of the group via a ten-segmentLED array.

Matrix Levels (A, B)Adjusts the level of group signal sent to the respectivematrix.

Effect Return GainControls the gain on the signal returning from the attachedeffect

Effect Return EQAlters the effect return signal pre-fader via two fixed-fre-quency (10kHz and 80 Hz) controls.

Effect Return AssignmentsAssign the post-pan, post fader, effect return signal to themix bus.

Effect Aux SendsControls the level of effect return signal sent to Auxes 1-4.

Aux 3•4 SwitchSwitches the Aux Levels between 1•3 and 2•4.

Pre/Post SwitchSelects the effect return signal between pre and post EffectLevel Control.

Effect PanAdjust the proportion of effect return signal being sent to theLeft (odd) and Right (even) mix buses.

Effect LevelAdjusts the final effect return signal level.

Effect MuteMutes the effect return signal.

Effect PFLAllows for Pre Fader Listening of the effect return signal.

Effect Peak & Signal LED’sThe red LED indicates that the effect signal is within 3dB ofthe clipping point.

The green LED constantly displays the level of signal activityby varying in intensity.

Group PanUsed to position group image between the Left and Rightoutput assignments.

Group MuteMutes the group signal except for the group insert send.

EFX RETURN

GROUP

POST

3•4

1•3

2•4

LEVEL

MONO

1 - 2

3 - 4

5 - 6

7 - 8

L - R

PFL

PEAK

SIG

MUTE

+9

+6

+3

0

-3

-6

-9

-12

-15

-18

GAIN

7

8

9

5

2

01

34 6

10

MATRIX

A

7

8

9

5

2

01

34 6

10

B

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

16 16

8 8

HF- 0+

16 16

8 8

LF- 0+

PAN

PAN

1

EFX RETURN

POST

3•4

1 3

2•4

MUTE

MONO

L - R

GROUP

MATRIXPOST

FADERREVERSE

XLR

PFL

PEAK

SIG

10

5

10

30

40

20

LEVEL

PFL

PEAK

SIG

MUTE

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

PAN

PAN

1

1

SCENEMUTEEFX

RETURN

A

B

C

D

SAFE

SP / TC / GT

PAGE 19

CENTURY SERIES

Group AssignmentsAssigns the group signal to the Left, Right, and or Mono out-puts.

Group XLRTurns on the balanced XLR output.

Matrix Pre/PostSwitches the Matrix sends between pre and post-fader settings.

Fader Reverse w/LEDSwaps functions between the Effect Level control and thegroup fader; i.e., one becomes the other and vice versa.

Group PFLAllows for Pre Fader Listening of the Group signal.

Group Peak & Signal LED’sThe red LED indicates that the group signal is within 3dB ofthe clipping point.

The green LED constantly displays the level of group signalactivity by varying in intensity.

Group FaderControls all post-fader group signal outputs.

EFX Return Scene MuteAssignmentsAssign the EFX return signal to any of the four scene mutegroups. Scene mute combines with the effect’s local mute but-ton, and actuates the local mute LED.

EFX Return Scene Mute Safe SwitchDisables all selected EFX scene mute assignments. An associ-ated green LED indicates the return is in a safe state.

Rear ConnectionsGroup OutThis connector carries the post-fader outputsignal from the associated group module.

Group InsertThis jack allows for the insertion of an effector signal processor into the audio path of theassociated group.

EFX ReturnThese two connectors allow for effect signalsto be brought back into the board. The 1/4"TRS jack accepts a balanced or unbalancedsignal at -10 dB level and delivers the signalto the EFX return section. The female XLRconnector accepts a balanced signal at +4dBlevel and delivers the signal to the EFXreturn section of the group.

Bus InThis connector accepts a balanced signal at+4dB level, and then sums it with all theother signals assigned to the associatedgroups.

GROUP INSERT

GROUP OUT

EFX RETURN

-10

+4

BUS IN

SP / TC / GT

PAGE 20

CENTURY SERIES

MATRIX

+9

+6

+3

0

-3

-6

-9

-12

-15

-18

1

2

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

MATRIX AUX IN

L

R

MONO

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

MAINS

7

8

9

5

2

01

34 6

1

STRPGM IN

LEFT|

MONO|

RIGHT

2

3

4

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

1

GROUPS 1-4

GROUPS 5-8

6

7

8

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

5

34 6

7

8

9

5

2

01

34 6

1

5

MUTE

PFL

PEAK

SIG

TB ENB

10

0

5

10

30

40

5

20

2

3

4

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

1

GROUPS 1-4

GROUPS 5-8

6

7

8

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

7

8

9

5

2

01

34 6

1

5

Matrix ModuleThe Matrix Module allows the creation of an independent mixusing the Main outputs (and an External Input) as signalsources.

Matrix AUX IN ControlsControls level of external balanced input signals.

L & R MAINS ControlsControls level of post fader L & R signals from main section.

MONO MAINS ControlControls the level of post fader Mono signal from main sec-tion.

STR PGM IN ControlControls level of Stereo Program being input into the matrix.(These switches do not function on the SP/TC Consoles)

LEFT/MONO/RIGHT SwitchesSelects which main section signals are introduced into thematrix. (These switches do not function on the SP/TCConsoles)

GROUPS 1-4 ControlsAdjusts the level of Group signals 1-4 introduced into thematrix.

GROUPS 5-8 ControlsAdjusts the level of Group signals 5-8 introduced into thematrix.

MUTE Switch with LEDMutes the output. This switch does not affect the PFL switchor the Peak and Signal Present LED indicators.

TB ENABLE ControlInjects the talkback signal from the Master section into thematrix.

PFL SwitchSamples the matrix signal pre-fader and allows for monitoringwithin the master section of the console. This signal is notaffected by the Mute Switch. When depressed, the signal levelcan be seen on the Left/Right meters, and heard via the mixer’sheadphone or local monitor output. When this PFL Switch isdepressed, the PEAK LED illuminates at a lower intensity.When used as a status indicator of switch position, the PeakLED indicating circuit remains fully operational by illuminat-ing at a much higher intensity than its use as a PFL status indi-cator.

PEAK LED IndicatorIlluminates RED when any of the points monitored come with-in 3db of the clipping point. Signal is sampled after the inputpreamplifier stage and after the fader.


SIGNAL PRESENT LEDConstantly displays level activity of the matrix by varying inintensity.

100mm FaderUsed for control of all outputs of the channel. (The Insert out-put level is not affected by the fader position.)

Rear ConnectionsMatrix OutThis connector delivers a balanced signalfrom the matrix module.

Matrix InsertThis jack allows for the insertion of an effector signal processor into the audio path of thematrix output.

Aux In 1This connector accepts a balanced signal at+4dB level, and then sums it with all the othersignals in the matrix output.

Aux In 2This connector accepts a balanced signal at+4dB level, and then sums it with all the othersignals in the matrix output.

SP / TC / GT

PAGE 21

CENTURY SERIES

MTX INSERT

AUX IN 2

MATRIX OUT

AUX IN 1

SP / TC / GT

PAGE 22

CENTURY SERIES

AFL1

AFL2

AUXMASTERS

LEFT

+9

+6

+3

0

-3

-6

-9

-12

-15

-18

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1

2

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

5

6

AFLON

AFL3

AFL4

AUXMASTERS

RIGHT

+9

+6

+3

0

-3

-6

-9

-12

-15

-18

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

3

4

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

AFLON

+24

-20

+20

DCPOWER

PFL ON

+48

MONITORCONTROL

MONO

ON

1• 2

3• 4

MONO

L - R

PFLDEFEAT

DIM

MUTE

PFL ON

LOCALMONITOR

HEADPHONES

GROUPS

TALK BACKCONTROL

AUX

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

LEV7

8

9

5

2

01

34 6

10

PHONES

LAMP DIM

AFL1

AFL2

AUXMASTERS

0

7

8

9

2

01

3

10

7

8

9

5

2

01

34 6

10

2

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

5

6

MUTE

MONO

PFL

PEAK

SIG

LEFT

AFLON

20

15

40

50

30

AFL3

AFL4

AUXMASTERS

0

7

8

9

2

01

3

10

7

8

9

5

2

01

34 6

10

4

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

MUTE

MONO

PFL

PEAK

SIG

RIGHT

AFLON

20

15

40

50

30

PFL

PEAK

SIG

0

15

20

40

50

30

MONO

MUTE

ON

1• 2

3• 4

MONO

L - R

GROUPS

TALK BACKCONTROL

AUX

LEV7

8

9

5

2

01

34 6

10

SP / TC / GT

PAGE 23

CENTURY SERIES

SP/TC Master SectionLeft & Right MetersMonitors the post-fader output of the Left & Right channels,and any PFL’d or AFL‘d signals, via a ten-segment LED array.

Power IndicatorsThese four LED’s indicate the status of the four types of powerused by Century Series Consoles.

Headphone JackDelivers right and left output, unless a PFL or AFL switch isdepressed. Whenever any signal is in PFL or AFL mode theheadphone jack will deliver that signal. An additional head-phone jack is located underneath the hand rest on the right-front part of the console.

Headphone Level ControlControls signal level delivered to the two headphone jacks.

Local Monitor Level ControlControls signal level delivered to the local monitor outputs.

PFL DefeatDisables PFL function to the local monitor, permitting localmonitor output to function as an additional left/right output.

Dim SwitchIntroduces -12 dB attenuation into local monitor output. Localmonitors are automatically dimmed when Talkback is engaged.

Mono SwitchSwitches local monitor from stereo mode to mono mode.

Local Monitor MuteMutes the local monitor signal output.

Aux Master ControlsControls final output signal level of eight auxiliary outputs.

Aux AFL SwitchesSwitch the eight auxiliary outputs to After Fader Listeningmode, via the normal PFL signal path. The AUXes can bemonitored as stereo pairs if both AFL switches are depressed.If only one is depressed, that AUX is monitored in mono.

Talkback Level ControlControls the level of talkback signal output, and dims the localmonitor, whether or not the Dim switch has been pressed.

Talkback Assignment SwitchesAssign the talkback signal to the outputs, groups and or auxes.

Talkback On/Off SwitchTurns the talkback system on and off.

L/R/Mono Mute SwitchesMute outputs of the Left, Right and Mono signals respectively.

L/R Mono Assignment SwitchesAssign the Left and Right signals to the Mono output.

L/R/Mono PFL SwitchesAllow for Pre Fader Listening of the Right, Left and Monooutput signals.

L/R/Mono Peak & Signal LED’sRed LEDs indicate the signal is within 3dB of clipping point.

The green LED indicates the level of signal activity by varyingin intensity.

L/R/Mono FadersAdjust final signal level of the Right, Left and Mono outputs.

Talkback Mic InputAllows a microphone to be plugged in for use with the talk-back system. This jack is located next to the headphone jack onthe front-right of the console under the arm rest.

Rear ConnectionsMono OutDelivers balanced post-fader signal containing all signalsassigned to the Mono Clean Bus.

Right OutDelivers a balanced post-fader signal containing all signalsassigned to the right output.

Left OutDelivers a balanced post-fader signal containing all signalsassigned to the left output.

Mono InsertThis jack allows for the insertion of a signal processor into the

path of the mono sub-mix.

Right InsertThis jack allows for the insertion of an effect or signal proces-sor into the audio path of the right sub-mix.

Left InsertThis jack allows forthe insertion of aneffect or signalprocessor into theaudio path of theleft sub-mix.

Monitor Out(R&L)These two connec-tors deliver a bal-anced signal fromthe left and rightlocal monitor.

Aux 1-8 OutThese eight connec-tions provide thebalanced output sig-nals from theirrespective auxiliarybuses.


MONO OUT

MONO INSERT

RIGHT OUT LEFT OUT

MONITOR L OUT AUX 3 OUT AUX 1 OUT

MONITOR R OUT AUX 4 OUT AUX 2 OUT

AUX 7 OUT AUX 5 OUT

AUX 6 OUT AUX 8 OUT

SP / TC / GT

PAGE 24

CENTURY SERIES

AFL1

AFL2

AUXMASTERS

LEFT

4

3

1

2

AUXMUTES

+9

+6

+3

0

-3

-6

-9

-12

-15

-18

AUX SCENEACTIVE

MATRIX

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1

2

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

5

6

MATRIXPOST

MUTE

MONO

LEFT

AFLON

A

B7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

AFL3

AFL4

AUXMASTERS

RIGHT

8

7

5

6

AUXMUTES

+9

+6

+3

0

-3

-6

-9

-12

-15

-18

AUX SCENEACTIVE

MATRIX

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

3

4

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

MATRIXPOST

MUTE

MONO

RIGHT

AFLON

A

B7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1•2

3•4

BLENDL/R TO AUXES

STEREOPROGRAM IN

MONO

L - R

AUX1•2

AUX3•4

MATRIXA - B

+24

-20

+20

LEV

DCPOWER

PFLON

+48

MATRIX

GAIN

7

8

9

5

2

01

34 6

10

BAL

7

8

9

5

2

01

34 6

10

PFL

PEAK

SIG

MUTE

7

8

9

5

2

01

34 6

10

LEV

MATRIXPOST

MONO

LAMP DIM

A

B7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

16 16

8 8

HF- 0+

16 16

8 8

LF- 0+

MUTE

MATRIX

B

MONITORCONTROL

MONO

ON

5•6

7•8

1•2

3•4

MONO

L - R

PFLDEFEAT

DIM

MUTE

EXTTBOUTPUT

PFLON

LOCALMONITOR

HEADPHONES

TBMIC

EXTOSC

EXTTBINPUT

MATRIXMASTERS

GROUPS

TALK BACKCONTROL

AUX

A

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

LEV7

8

9

5

2

01

34 6

10

PFL

PEAK

SIG

MUTE

MUTE

7

8

9

5

2

01

34 6

10

A

PHONES AFL1

AFL2

AUXMASTERS

4

3

2

AUXMUTES

0

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

1

2

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

5

6

MATRIXPOST

MUTE

MONO

PFL

PEAK

SIG

LEFT

AFLON

20

15

40

50

30

AFL3

AFL4

AUXMASTERS

8

7

6

AUXMUTES

0

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

3

4

AFL5

AFL6

AFL ON

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

7

8

MATRIXPOST

MUTE

MONO

PFL

PEAK

SIG

RIGHT

AFLON

20

15

40

50

30

1•2

3•4

BLENDL/R TO AUXES

STEREOPROGRAM IN

MONO

L - R

AUX1•2

AUX3•4

MATRIXA - B

LEV

BAL

7

8

9

5

2

01

34 6

10

PFL

PEAK

SIG

MUTE

7

8

9

5

2

01

34 6

10

LEV

MATRIXPOST

PFL

PEAK

SIG

0

15

20

40

50

30

MONO

16 16

16 16

8 8

LF- 0+

MUTE

MATRIX

B

MONITORCONTROL

A

MONO

ON

5•6

7•8

1•2

3•4

MONO

L - R

PFLDEFEAT

DIM

MUTE

EXTTBOUTPUT

PFLON

B

C

D

SCENE MUTEMASTERS

EXTOSC

EXTTBINPUT

MATRIXMASTERS

GROUPS

TALK BACKCONTROL

AUX

AUX

A

LEV7

8

9

5

2

01

34 6

10

PFL

PEAK

SIG

MUTE

PFL

PEAK

SIG

MUTE

7

8

9

5

2

01

34 6

10

7

8

9

5

2

01

34 6

10

A

B

GT Master SectionThis master section is the control center for most of the GT’sadvanced functions.

Left & Right MetersMonitors the post-fader output of the Left & Right channels,and any PFL’d signals, via a ten-segment LED array.

Lamp Dim ControlControls the intensity of the lighting devices plugged into theXLR sockets on the light bar.

Talkback Mic InputAllows for a gooseneck microphone to be plugged in for usewith the talkback system. An additional Talkback Mic Inputjack can be found next to the headphone jack on the front-rightof the console under the arm rest.

Power IndicatorsThese four LED’s indicate the status of the four types of powerused by Century Series Consoles.

Headphone JackDelivers right and left output, unless a PFL switch isdepressed. Whenever any signal is in PFL mode, the head-phone jack will deliver that signal. An additional headphonejack is located beneath the hand rest on the right-front part ofthe console.

Headphone Level ControlControls the signal level delivered to the headphone jacks.

L, R & Mono Matrix SendsControls level of Right, Left and Mono signals sent to the twomatrices.

Local Monitor Level ControlControls level of signal delivered to the monitor outputs.

Auxiliary MutesMutes the respective auxiliary signals.

PFL DefeatDisables PFL function to the local monitor, allowing localmonitor output to function as an additional left/right output.

Dim SwitchThis switch introduces a -12 dB attenuation into the local mon-itor and headphone outputs.

Mono SwitchSwitches the local monitor and headphone outputs from theirstandard stereo mode to a mono mode.

Stereo Program In GainAdjusts the gain of the Stereo Program In signal.

Stereo Program In EQTwo-band fixed frequency (10kHz and 80Hz) EQ that affectsthe Stereo Program In signal.

Stereo Program In AssignmentsAssigns the Stereo Program to the associated buses.

Local Monitor MuteMutes the local monitor signal output.

Aux Master ControlsControls final output signal level of the auxiliary outputs.

Aux AFL SwitchesSwitch the eight auxiliary outputs to After Fader Listeningmode, via normal PFL signal path. AUXes can be monitored asstereo pairs if both AFL switches are depressed. If only one isdepressed, that AUX is monitored in mono.

External Oscillator SwitchTurns on the internal oscillator or accepts signal from the1/4"TRS Oscillator input jack.

External Talkback Input SwitchSelects the external talkback input XLR as an input signal tothe talkback section and overrides the Oscillator.

Stereo Program BalanceAdjusts balance of stereo signal from Stereo Program input.

Stereo Program LevelControls final output signal level of the Stereo Program.

Talkback Level ControlControls the level of the selected talkback source.

External Talkback Output SwitchTurns on the external talkback XLR.

Stereo Program MuteMutes the output of the stereo program.

Stereo Program PFLAllows Pre Fader Listening of the Stereo Program signal.

Talkback Assignment SwitchesAssigns talkback signal to outputs, groups, auxes, or matrices.

Blend LevelControls level of L & R signal blended to assigned auxes.

Blend Assignment SwitchesAssigns the Left and Right signals to the respective auxes.

Talkback On/Off SwitchTurns the talkback system on and off, and dims local monitor,whether or not Dim switch has been pushed.

Matrix Master Levels (A&B)Controls the final output level of the respective matrix.

Matrix Master Mutes (A&B)Mutes the respective matrix signal.

Matrix Master PFL (A&B)Allows Pre-Fader Listening of the respective matrix signal.

Scene Mute Master SwitchesTurn on and off the four scene mutes.

Aux Scene Mute On/Off SwitchTurns the Aux Scene Mute system on and off.

L/R/Mono Mute SwitchesMute outputs of Left, Right and Mono signals respectively.

(Continued)

SP / TC / GT

PAGE 25

CENTURY SERIES

GT Master Section (cont'd)L&R Mono Assignment SwitchesAssign the Left and Right signals to the Mono output..

L/R/Mono Matrix Post SwitchesSwitches the Left, Right and Mono matrix signals between preand post fader.

L/R/Mono PFL SwitchesAllow for Pre-Fader Listening of the Left, Right and Monosignals respectively.

L/R/Mono Peak & Signal LED’sThe red LED indicates that the signal is within 3dB of the clip-ping point. The green LED constantly displays the level of sig-nal activity by varying in intensity.

L/R/Mono FadersAdjust final output signal level of Right, Left and Mono out-puts.

Rear ConnectionsMatrix Out (A&B)These two connectors deliver a balanced signal from the asso-ciated matrix master.

Mono OutThis connector delivers a balanced post-fader signal containingall signals assigned to the Mono Clean Bus.

Right OutThis connector delivers a balanced post-fader signal containingall signals assigned to the right output.

Left OutThis connector delivers a balanced post-fader signal containingall signals assigned to the left output.

Matrix Insert (A&B)This jack allows for the insertion of an effect or signal proces-sor into the audio path of the associated matrix.

Mono InsertThis jack allows for the insertion of a signal processor into the

path of the mono sub-mix.

Right InsertThis jack allows for the insertion of an effect or signal proces-sor into the audio path of the right sub-mix.

Left InsertThis jack allows for the insertion of an effect or signal proces-sor into the audio path of the left sub-mix.

Monitor Out (R&L)These two connectors deliver a balanced signal from the leftand right local monitor.

Aux 1-8 OutThese eight connections provide the balanced output signalsfrom their respective auxiliary buses.

Ext. Talkback OutThis connector provides an external balanced signal from theselected talkback source.

Ext. Talkback InThis connector accepts a balanced signal which is assignable toany of the locations in the talkback system.

Stereo Program InThis jack accepts an unbalanced stereo line level signal for useas warm-up or break music.

Oscillator / Pink Noise InThis connector accepts a balanced or unbalanced signal froman oscillator or pink noise generator. This signal is assignablevia the talkback assignment switches.

SP / TC / GT

PAGE 26

CENTURY SERIES


MONO OUT

MONO INSERT

MATRIX A OUT

INSERT A

RIGHT OUT LEFT OUT

MONITOR L OUTMATRIX B OUT AUX 3 OUT AUX 1 OUT

INSERT B MONITOR R OUT AUX 4 OUT AUX 2 OUT

STR PGM IN AUX 7 OUT AUX 5 OUT

AUX 6 OUT AUX 8 OUTOSC/PINK IN

EXT TB OUT

EXT TB IN

Appendix A

TechnicalInformation

GT TC SP

SP / TC / GT

APPENDIX A

CENTURY SERIES

General Specifications -SP ConsoleThe following are the technical specifications for the CenturySP console.

Architect’s & Engineer’sSpecifications - SP ConsoleThe following text should be used when specifying a CenturySP in a bid or proposal.

The live sound console shall be constructed in a modular fashion and behoused in a steel frame with molded plastic side panel/carrying handles.The console shall be black with white labeling and utilize XLR lightingdevice connectors. The console shall have an XLR talkback mic connectorand a headphone jack. These shall be located beneath the far right side ofthe armrest.All microphone inputs shall be electronically balanced and accessed via 3-pin XLR connectors and have an EIN of -129 dBm. All line inputs shall beelectronically balanced and accessed via 1/4" TRS jacks. The insert pointsshall be via 1/4" TRS jacks.Each input channel shall have: a +48 volt phantom power switch, a -15 dBmic pad switch, a 80Hz high pass filter switch, and 4-band fixed EQ(80Hz, 300Hz, 2.7kHz, 10kHz) with an EQ In switch. Each input channelshall also have: a FET controlled (10 millisecond ramp) mute switch withLED, sub-group assignment switches, a L/R assignment switch, a dedicat-ed mono assignment switch, a dynamic signal present LED and peak LED,a PFL switch, and a 100mm long throw fader. Each input channel shallhave eight auxiliary sends which shall be controlled via six knobs andthree switches.The aux sends shall have a pre/post fader switch for everyfour sends. The aux sends shall be selectable pre or post fader. The console shall be available in four or eight bus configurations. Eachgroup module shall have a ten-segment LED meter array. The effect returnsection of each group module shall have a gain control, a two-band fixedEQ, sub-group assignment switches, a L/R assignment switch, a dedicatedmono assignment switch, two aux send controls, a pan control, a level con-trol, a dynamic signal present LED and peak LED, and a PFL switch. Theremainder of the group module shall have a pan control, an FET controlled(10 millisecond ramp) mute switch with LED, assignment switches for:mono and L/R. A PFL switch, dynamic signal present LED and peak LED,and a 100mm long throw fader shall also be provided on the group mod-ule.The master section shall be four modules in width and have the followingfeatures: eight aux master controls with associated AFL switches, a100mm long throw fader for each of the three master outputs and a com-prehensive talkback system.The power supply shall be housed in a 14 ga. steel chassis that shall occu-py two 19" rack spaces. The power supply shall have the ability to bedaisy-chained to additional power supplies to provide a fail-safe operatingenvironment. Connection of two or more power supplies shall not requireadditional interface hardware other than the provided cable.The live sound console shall be: the Crest Audio Century SP.

Four Subgroup 16, 24, 32, 36, 44, or 56 inputsEight Subgroup 12, 20, 28, 32, 40, or 52 inputsOptional stereo input modules and matrix modules are available.

ConfigurationsSP Consoles are available in the following configurations:

Frequency Response+0.0, -0.5dB, 20Hz to 20 kHz (referenced to 1kHz)

Total Harmonic DistortionMic input to Group output20Hz to 20 kHz at +15dBu 102 dBChannel Fader Attenuation > 96 dBChannel Routing > 85 dBChannel Aux Send Attenuation > 93 dB

Input/Output ImpedancesMic Input 4kΩ balancedLine Input >10kΩ balancedOutputs 140Ω balanced

Input/Output Levels (0VU = +4 dBu, 1.23V RMS)Mic Input Sensitivity + 4 to -62 dBuLine Input Sensitivity + 12 to -38 dBuInput Insertion Point Level + 4 dBuOutput Insertion Point Level - 2 dBuNominal Output Level + 4 dBuMaximum Balanced Output Level +28 dBu

SP / TC / GT

APPENDIX B

CENTURY SERIES

General Specifications - TC ConsoleThe following are the technical specifications for the CenturyTC console.

Frequency Response+0.0, -0.5dB, 20Hz to 20 kHz (referenced to 1kHz)

Total Harmonic DistortionMic input to Group output20Hz to 20 kHz at +15dBu 102 dBChannel Fader Attenuation > 96 dBChannel Routing > 85 dBChannel Aux Send Attenuation > 93 dB

Input/Output ImpedancesMic Input 4kΩ balancedLine Input >10kΩ balancedOutputs 140Ω balanced

Input/Output Levels (0VU = +4 dBu, 1.23V RMS)Mic Input Sensitivity + 4 to -62 dBuLine Input Sensitivity + 12 to -38 dBuInput Insertion Point Level + 4 dBuOutput Insertion Point Level - 2 dBuNominal Output Level + 4 dBuMaximum Balanced Output Level +28 dBu

Architect’s & Engineer’sSpecifications - TC ConsoleThe following text should be used when specifying a CenturyTC in a bid or proposal.

The live sound console shall be constructed in a modular fashion andbe housed in a steel frame with molded plastic side panel/carrying han-dles. The console shall be black with white labeling and utilize XLRlighting device connectors. The console shall have an XLR talkbackmic connector and a headphone jack. These shall be located beneath thefar right side of the armrest.All microphone inputs shall be electronically balanced and accessed via3-pin XLR connectors and have an EIN of -129 dBm. All line inputsshall be electronically balanced and accessed via 1/4" TRS jacks. Theinsert points shall be via 1/4" TRS jacks.Each input channel shall have: a +48 volt phantom power switch, a -15dB mic pad switch, a 80Hz high pass filter switch, a polarity reverseswitch and 4-band (LF-80Hz, LMF-100Hz-2kHz, HMF-400Hz-8kHz,HF-10kHz) mid-sweepable EQ an EQ In switch. Each input channelshall also have: a FET controlled (10 millisecond ra

Documents

CENTURY S SP TC GT - Audiofanzine...Crest Audio’ Century Series makes use of two different power supplies. The model and frame size of your particular console determines which of