Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.

ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB Barendrecht, The Netherlands, TEL: +31 10 2922 689 - www.dnvba.com

CERTIFICATE OF CONFORMITY

OF THE FACTORY PRODUCTION

CONTROL Certificate No.:

2388-CPR-0023 Rev. 1.0

Initial certification date:

2014-11-04

In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction products Regulation or CPR), this certificate applies to the construction product(s)

Structural steelcomponents, for structural use in all types of construction works, Execution Class 3, within

validity ranges as indicated in Appendix to Certificate

placed on the market under the name or trade mark of

Granly Steel A/S

Nyhavnsgade 20, 6700 Esbjerg, Denmark

and produced in the manufacturing plant(s)

Granly Steel A/S

Nyhavnsgade 20, 6700 Esbjerg, Denmark

This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard(s)

EN 1090-1:2009/A1:2011

under system 2+ are applied and that

THE FACTORY PRODUCTION CONTROL IS ASSESSED TO BE IN CONFORMITY WITH THE APPLICABLE REQUIREMENTS

This certificate will remain valid as long as neither the harmonised standard, the construction product, the AVCP methods nor the manufacturing conditions in the plant are modified significantly, unless suspended or withdrawn by the notified factory production control certification body.

For more details see Appendix accompanying this Certificate.

Place and date:

Barendrecht, 2018-04-11

For the Notified Body 2388:

DNV GL – Business Assurance

Zwolseweg 1, 2994 LB Barendrecht,

The Netherlands, +31 10 2922 689

______________________________________________________________________________

D.P. Koek

Management Representative

Certificate No.: 2388-CPR-0023 Rev. 1.0

Place and date: Barendrecht, 2018-04-11

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.

ACCREDITED UNIT: DNV GL Business Assurance B.V., Zwolseweg 1, 2994 LB Barendrecht, The Netherlands, TEL: +31 10 2922 689 - www.dnvba.com

Appendix to Certificate

Validity ranges

Product types: Steel structure components

Design: No

Method of declaration: 3a

Cutting: No

Holing: No

Forming: No

Welding: Yes

Mechanical Fastening: No

Surface Treatment: Yes

Material subgroups acc. ISO/TR 15608: 1.1, 1.2, 1.3, 1.4, 2.1, 2.2, 3.1, 3.2, 3.3, 5.1, 7.1, 8.1,

8.2, 8.3

Welding processes acc. ISO 4063: 111, 131, 135, 136, 141

Name/Qualification

Responsible Welding Coordinator (RWC):

Keld Dupont, IWE, WP 00200 Force Certification

Certificate history

Revision Description Issue Date

0.0 Initial Certificate 2014-11-05

1.0 New layout certificate 2018-04-11

Declaration of performance and marking of product

When meeting with the terms and conditions, as required, the manufacture shall draw up an EC declaration of

product performance and legally affix the CE mark followed by the notified factory production control certification

body identification number of DNV GL (2388).

END OF CERTIFICATE