Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
sandpiperpump.com
HDB3/HDB4 Heavy Duty Ball Valve Design Level 4
Quality SystemISO 9001 Certified
Environmental Management System ISO 14001 Certified
Certified Quality
Warren Rupp, Inc.A Unit of IDEX Corporation
800 N. Main St., Mansfield, Ohio 44902 USA Telephone (419) 524.8388
Fax (419) 522.7867SANDPIPERPUMP.COM
©2016 Warren Rupp, Inc.
36.40 925
18.63 473
26.06 662
AIR INLET3/4" NPT
19.66 499
32.65 829
1.22 3113.50 343
16.25 413
SUCTION PORT3" 150# ANSI FLANGE4X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
DISCHARGE PORT3" 150# ANSI FLANGE4X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
11.00 279
15.00 381
17.63 448
8X .56MOUNTING HOLE
AIR EXHAUST1" NPT
6.26 159
18.62 473
19.25 489
31.19 792
26.06 662
DISCHARGE PORT4" 150# ANSI FLANGE8X .75 HOLES EQUALLYSPACED ON A 7.50 B.C.
SUCTION PORT4" 150# ANSI FLANGE8X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
AIR INLET3/4" NPT 18.32 465
17.50 445
27.07 688
1.18 30
17.62 448
8X .56 14MOUNTING HOLE
11.00 279
15.00 381
AIR EXHAUST1" NPT
DATA SHEETSpecifications & Performance
hdb3dl4ds-rev0316
sandpiperpump.com1 • Model HDB3/HDB4
Explanation of Pump Nomenclature
ATEX Detail
(1) II 2GD T5II 1 G c T5II 1 D c T100°CI M1 cI M2 cModels equipped with Cast Iron or Stainless Steel wetted parts, and Cast Iron midsection parts.
Diaphragm Check Valve Materials B Nitrile C FKM with PTFE GN Neoprene Backup with PTFE Overlay and PTFE Check Balls H EPDM with PTFE I EPDM N Neoprene U Santoprene with PTFE
Design Level 4
Construction SI Stainless Steel Wetted, Cast Iron Air CI Cast Iron Wetted, Cast Iron Air
Pump Series HD Heavy Duty
Pump Design B Soilid Ball
Pump Size 3 3" 4 4"
Discharge Porting Position D Bottom T Top
Options P1 Intrinsically Safe ATEX Compliant Pulse Output
Your Serial #: (fill in from pump nameplate) _____________________________________
__ __ _____ __ ___ __ __
Pump Pump Pump Size Discharge Diaphragm/ Design Construction Series Design and Options Porting Valve Level
XX X XXXXXX, XX XXX X XXModel #:
(fill in from pump nameplate)
Your Model #:
MODEL SPECIFIC
20(34)40(68)
60(101.9)80(135.9)
100(169.9)
120(203.9)
140 (237.9)
160(271.8)
180(305.8)
200(339.8)
90
80
70
60
50
40
30
20
10
00 20 40 60 80 100 120 140 160 180 200 220 240 260
100 PSI
80 PSI
60 PSI
40 PSI
100
0 100 200 300 400 500 600 700 800 900 1000
BA
R
0
1
2
3
4
5
6
7
PS
I
20 PSI Air Inlet Pressure
Liters per minute
U.S. Gallons per minute
CAPACITY
AIR CONSUMPTION SCFM (M3/hr)
HE
AD
MODEL HDB3/HDB4 Performance CurvePerformance based on the following: elastomer fitted pump, flooded suction,
water at ambient conditions. The use of other materials and varying hydraulicconditions may result in deviations in excess of 5%.
hdb3dl4ds-rev0316
sandpiperpump.com Model HDB3/HDB4 • 2
PerformanceHDB3 & HDB4
SUCTION/DISCHARGE PORT SIZE• 3" ANSI Flange
CAPACITY• 0 to 260 gallons per minute (0 to 988 liters per minute)
AIR DISTRIBUTION VALVE• No-lube, no-stall design
SOLIDS-HANDLING• Up to .875 in. (22.2mm)
HEADS UP TO• 125 psi or 289 ft. of water(8.8 Kg/cm2 or 88 meters)
MAXIMUM OPERATING PRESSURE• 125 psi (8.6 bar)
DISPLACEMENT/STROKE• 1.8 Gallon / 6.8 liter
SHIPPING WEIGHT• Cast Iron 460 lbs. (207 kg)• Stainless Steel 480 lbs. (216 kg)
MaterialsMaterial Profile: Operating
Temperatures:Max. Min.
Conductive Acetal: Tough, impact resistant, ductile. Good abrasion resistance and low friction surface. Generally inert, with good chemical resistance except for strong acids and oxidizing agents.
190°F88°C
-20°F-29°C
EPDM: Shows very good water and chemical resistance. Has poor resistance to oils and solvents, but is fair in ketones and alcohols.
280°F138°C
-40°F-40°C
FKM: (Fluorocarbon) Shows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions (over 70°F(21°C)) will attack FKM.
350°F177°C
-40°F-40°C
Hytrel®: Good on acids, bases, amines and glycols at room temperatures only.
220°F104°C
-20°F-29°C
Neoprene: All purpose. Resistance to vegetable oils. Generally not affected by moderate chemicals, fats, greases and many oils and solvents. Generally attacked by strong oxidizing acids, ketones, esters and nitro hydrocarbons and chlorinated aromatic hydrocarbons.
200°F93°C
-10°F-23°C
Nitrile: General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used with highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons.
190°F88°C
-10°F-23°C
Nylon: 6/6 High strength and toughness over a wide temperature range. Moderate to good resistance to fuels, oils and chemicals.
180°F82°C
32°F0°C
Polypropylene: A thermoplastic polymer. Moderate tensile and flex strength. Resists stong acids and alkali. Attacked by chlorine, fuming nitric acid and other strong oxidizing agents.
180°F82°C
32°F0°C
PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with excellent chemical resistance. Excellent for UV applications. High tensile strength and impact resistance.
250°F121°C
0°F-18°C
Santoprene®: Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance.
275°F135°C
-40°F-40°C
UHMW PE: A thermoplastic that is highly resistant to a broad range of chemicals. Exhibits outstanding abrasion and impact resistance, along with environmental stress-cracking resistance.
180°F82°C
-35°F-37°C
Urethane: Shows good resistance to abrasives. Has poor resistance to most solvents and oils.
150°F66°C
32°F0°C
Virgin PTFE: (PFA/TFE) Chemically inert, virtually impervious. Very few chemicals are known to chemically react with PTFE; molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures.
220°F104°C
-35°F-37°C
Maximum and Minimum Temperatures are the limits for which these materials can be operated. Temperatures coupled with pressure affect the longevity of diaphragm pump components. Maximum life should not be expected at the extreme limits of the temperature ranges.
Metals:Alloy C: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.Stainless Steel: Equal to or exceeding ASTM specification A743 CF-8M for corrosion resistant iron chromium, iron chromium nickel and nickel based alloy castings for general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.
CAUTION! Operating temperature limitations are as follows:
Ambient temperature range: -20°C to +40°C Process temperature range: -20°C to +80°C for models rated as category 1 equipment -20°C to +100°C for models rated as category 2 equipmentIn addition, the ambient temperature range and the process temperature range do not exceed the operating temperature range of the applied non-metallic parts as listed in the manuals of the pumps.
ATEX Detail
MODEL SPECIFIC UNIVERSAL ALL AODD
hdb3dl4ds-rev0316
sandpiperpump.com3 • Model HDB3/HDB4
HDB3 Heavy Duty Ball Valve - 3" Top Ported Dimensions in inches (metric dimensions in brackets). Dimensional Tolerance .125" (3mm).
Dimensional Drawings
36.40 925
18.63 473
26.06 662
AIR INLET3/4" NPT
19.66 499
32.65 829
1.22 3113.50 343
16.25 413
SUCTION PORT3" 150# ANSI FLANGE4X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
DISCHARGE PORT3" 150# ANSI FLANGE4X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
11.00 279
15.00 381
17.63 448
8X .56MOUNTING HOLE
AIR EXHAUST1" NPT
MODEL SPECIFIC
hdb3dl4ds-rev0316
sandpiperpump.com Model HDB3/HDB4 • 4
HDB4 Heavy Duty Ball Valve - 4" Top Ported Dimensions in inches (metric dimensions in brackets). Dimensional Tolerance .125" (3mm).
Dimensional Drawings
18.63 473
37.15 944
26.06 662
AIR INLET3/4" NPT
19.66 499
32.65 829
16.25 413
4.22 107
19.50 495
SUCTION PORT4" 150# ANSI FLANGE8X .75 HOLES EQUALLYSPACED ON A 7.50 B.C.
DISCHARGE PORT4" 150# ANSI FLANGE8X .75 HOLES EQUALLYSPACED ON A 7.50 B.C.
11.00 279
15.00 381
17.63 448
8X .56MOUNTING HOLE
AIR EXHAUST1" NPT
hdb3dl4ds-rev0316
sandpiperpump.com5 • Model HDB3/HDB4
HDB3 Heavy Duty Ball Valve - 3" Bottom Ported Dimensions in inches (metric dimensions in brackets). Dimensional Tolerance .125" (3mm).
Dimensional Drawings
6.26 159
18.62 473
19.25 489
31.19 792
26.06 662
DISCHARGE PORT3" 150# ANSI FLANGE4X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
SUCTION PORT3" 150# ANSI FLANGE4X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
AIR INLET3/4" NPT
31.07 789
15.32 389
1.82 46
24.07 611
17.50 445
17.62 448
8X .56 14MOUNTING HOLE
11.00 279
15.00 381
AIR EXHAUST1" NPT
hdb3dl4ds-rev0316
sandpiperpump.com Model HDB3/HDB4 • 6
HDB4 Heavy Duty Ball Valve - 4" Bottom Ported Dimensions in inches (metric dimensions in brackets). Dimensional Tolerance .125" (3mm).
Dimensional Drawings
6.26 159
18.62 473
19.25 489
31.19 792
26.06 662
DISCHARGE PORT4" 150# ANSI FLANGE8X .75 HOLES EQUALLYSPACED ON A 7.50 B.C.
SUCTION PORT4" 150# ANSI FLANGE8X .75 HOLES EQUALLYSPACED ON A 6.00 B.C.
AIR INLET3/4" NPT 18.32 465
17.50 445
27.07 688
1.18 30
17.62 448
8X .56 14MOUNTING HOLE
11.00 279
15.00 381
AIR EXHAUST1" NPT
Declaration of Conformity
Signature of authorized person Date of issue
Printed name of authorized person
Revision Level: F
TitleDavid Roseberry Engineering Manager
October 20, 2005
Date of revisionAugust 23, 2012
Manufacturer: Warren Rupp, Inc., 800 N. Main StreetMansfield, Ohio, 44902 USA
Certifies that Air-Operated Double Diaphragm Pump Series: HDB, HDF, M Non-Metallic, S Non-Metallic, M Metallic, S Metallic, T Series, G Series, U Series, EH and SH High Pressure,
RS Series, W Series, SMA and SPA Submersibles, and Tranquilizer® Surge Suppressors comply with the European Community Directive 2006/42/EC on Machinery, according to Annex VIII.
This product has used Harmonized Standard EN809:1998+A1:2009, Pumps and Pump Units for Liquids - Common Safety Requirements, to verify conformance.
5 - YEAR Limited Product WarrantyWarren Rupp, Inc. (“Warren Rupp”) warrants to the original end-use purchaser that no product sold by
Warren Rupp that bears a Warren Rupp brand shall fail under normal use and service due to a defect in materialor workmanship within five years from the date of shipment from Warren Rupp’s factory. Warren Rupp brands
include Warren Rupp®,SANDPIPER®, MARATHON®, PortaPump®, SludgeMaster™ and Tranquilizer ®.
~ See sandpiperpump.com/content/warranty-certifications for complete warranty, including terms and conditions, limitations and exclusions. ~
UNIVERSAL ALL SP
Manufacturer:Warren Rupp, Inc.A Unit of IDEX Corportion800 North Main StreetP.O. Box 1568Mansfield, OH 44902 USA
EC / EU Declaration of ConformityThe objective of the declaration described is in conformity with the relevant Union harmonisation
legislation: Directive 94/9/EC (until April 19, 2016) and Directive 2014/34/EU (from April 20, 2016).
The harmonised standards have been compared to the applicable standards used for certification purposes and no changes in the state of the art technical knowledge apply to the listed equipment.
AODD Pumps and Surge SuppressorsTechnical File No.: 203104000-1410/MER
AODD (Air-Operated Double Diaphragm) PumpsEC Type Examination Certificate No. Pumps: KEMA 09ATEX0071 X
DEKRA Certification B.V. (0344)Meander 10516825 MJ ArnhemThe Netherlands
Applicable Standard:EN13463-1: 2001EN13463-5: 2003EN60079-25: 2004Harmonised Standard:EN13463-1: 2009EN13463-5: 2011EN60079-25:2010
David Roseberry, Director of EngineeringDATE/APPROVAL/TITLE:18 March 2016
Hazardous Locations Applied:I M1 c II 2 G Ex ia c IIC T5II 2 D Ex c iaD 20 IP67 T100°CII 2 G Eex m c II T5II 2 D c IP65 T100°C
II 1 G c T5II 1 D c T100°CII 2 G c T5II 2 D c T100°C
UNIVERSAL ALL SP