II"'

_,. -

e ::.1111 C> Quality C:S, Endorsed 0 Company tll Cenific□tion ....,. No:OEC13252

The Name That Carries Weight

RD Series (Pressed Steel Castors) King Pinless unique side Race Swivel Castors eliminating the need of Double Ball Bearings

for Superior Strength Maximum Mileage

PRESSED STEEL CASTORS

GENERAL INFORMATION

SWIVEL CASTORS : In swivel castors the wheel and fork tum a full 360 degrees, whilst the top or mounting plate remains in a fixed position. The horizontal distance between the centerline of the swivel and the centreline of the wheel is called the offset. When pressure is applied through the mounting plate the offset causes the castor to swivel in line so that the wheel always trails in the opposite direction to which the equipment is being moved.

SWIVEL RADIUS : In our tables we give the swivel radius dimension for all swivel castors. This shows the mounting clearance required to allow the castor to swivel without obstruction.

FIXED CASTORS : Fixed castors have the top plate rigidly fastened to the fork legs with the wheel in line with the fixing bolt holes. These castors do not swivel at all and the wheel can only move in two directions, forwards and backwards.

ROLLING RESISTANCE : Rolling resistance determines the, effort necessary to move. the equipment from rest and to keep it rolling. If a wheel, so hard that it will not flatten under load, rolls on an absolutely flat hard surface, perfect rolling is possible. The nearer you. get to this ideal, the lower the rolling resistance becomes. In view of this, the first choice should be hard tread wheels but the average floor is far from smooth, and clean and is often littered with small particles of some description. Once the wheels are rolling they will pass over these small items with no problem, but if the equipment starts from rest with minor obstructions such as swart i� front of the wheels then the starting effort includes that necessary to lift the equipment to the height of the obstructions. In cases where hard wheels are used on soft floors such as carpeting, or even asphalt, the surface deformation causes the wheels to sit in small ruts and extra effort is needed to overcome! such resistance, Resilient wheels move more easily over obstructions as they deform and rollover them instead of climbing. On the other hand, as a tyre flattens under load, an area instead of a line is always in contact with the floor and resistance to rolling is greater. Individual characteristics of our wheels will be found elsewhere in this catalogue but, because of the wide variations in floor conditions, hardnesses, wheel diameters, tread profiles, etc., it is not practical to give rolling resistance figures in the tables. We will always be pleased to advise when given the necessary information, but the only accurate assessment is one based on the user making his own tests on site.

LOAD CAPACITIES : We do not give load capacities for 'Ideal working conditions' as these rarely exist. Capacities given in this catalogue are based on normal working conditions on reasonably level floors free from grooves, breaks, door cills, lift entrances and other hazards. They are also based on manual propulsion except in the case of castors designed for mechanical towing applications.

CASTOR AND WHEEL LUBRICATION : We recommend regular greasing of all nipples with a lithium based grease of the type used on car axles. Where nipples are not provided a few drops of light machine oil should be used.

,.

FINISH : Bright zinc electro-plating is our standard finish for pressed steel castors. Wheels and fabricated castors are paint sprayed bright aluminium. Other finishes can be supplied to special order subject to economical batches.

CASTOR AND WHEEL SELECTION : The following variable factors all have a bearing on the choice to be made and the performance to be expected.

LOADING : Apart from the gross weight of the load and equipment an allowance should be made for uneven distribution of weight as this often) results in one wheel carrying more than the rest. Mechanical loading can also impose severe shock loading.

FLOOR CONDITIONS : Rough uneven floors often go unnoticed but they cause severe overloading in some cases simply because one wheel leaves the ground and the load is thrust upon the remainder. Impact loads due to curbs and holes in the floor also cause problems.

MOTIVE POWER : If a truck, moved by hand, meets an obstruction it becomes harder to push and the result is that the truck slows down, takes an easier route; or the load is reduced. All these reduce the strain on the castors as well as the person pushing. This does not happen with mechanical towing as there is usually plenty of power in hand and this combined with higher speed results in considerably more castor stress occurring.

FLOOR SAVING : All metal wheels will damage floors if the load is heavy. Resilient wheels are not so easy to move but they are cer tainly kinder to floors. It should be remembered that the floor will cost more to repair than the price of the wheel running on it.

SPECIAL APPLICATIONS : Castors and wheels are usually-lly fitted to equipment that is in intermittent use and are often stationary for much of the time and our products are designed for such service. On applications such as conveyors where they are subject to continuous running, the normal load capacities do not apply as a life factor has to be introduced. Each case should be considered individually and we will be pleased to advise on receipt of the relevant information.

-

- -- -

I I

Rubber Oil Seal

81"'

C> .

...,. _

C> � C> Quality 0) Endorsed Q Company Cl'l (ertilkotion .,_. No:QEC13252

The wheel in a Swivel Castor revolves on an axle which is displaced horizontally in relation to the swivel center.

This displacement is known as "Offset". It is the offset which permits directional change, the characteristic castor

action and in motion causes the wheel to trail behind the swivel center. Although the offset is essential for castoring, it

also has the effect of transmitting off-center loading to the swivel. The load carried, combined with shock loads resulting from

uneven floor surfaces and obstacles will impose these severe thrust and radial loads on the swivel and it is therefore desirable that the swivel bearing is as large

as possible and constructed to distribute and contain these forces over the full diameter of the bearing. The original REXELLO swivel effectively covers this

requirement and is designed around a ball race made to the maximum diameter allowed by the size of the castor frame. In the pressed steel range for instance,

the inner raceway is an integral part of the castor body and the outer raceway is formed by the top cup. This proven design is illustrated by the sectional drawing

on next page. RD Pressed Steel Series is manufactured in 5 sizes of Swivel Bearings. (RD 1, RD 2, RD 3, RD 4, & RD 5) to cover load capacities from 16 kg to

820 kgs. per Castor. Wheel diameter: 1 ½" to 8". Choice of wheel material for varied applications: Rubber (R) Plastic (A); Cast Iron (C); Rubber Tyred (RT); Hard

Rubber (CR); Phenorex (P); Nylon (N).

Conventional king-pin design. In motion all loads concentrated on trailing edge of swivel.

Shock-loads caused by uneven floors, etc., force king-pin castor to bind producing swivel failure.

Extreme shock-loads distort or even fracture king-pin resulting in complete break-down.

The above diagram show the inherent defect of king-pin design. The concentration of the load at one point of the swivel circumference renders swiveling difficult even under good conditions, while shock-loads impose strains producing king-pin distortion and metal-to-metal friction.

SPECIFICATION TABLES

The castor dimensions listed in this catalogue under headings A, 8, C & D are taken from the datum points as shown in the above diagram.

SWIVEL CASTORS

Dia 11 mm

er ·:42=· ")

BH BLIND HOLE

Dia: 11 mm

'

KP

E E

KING PIN with CIRCLIP Sizes Available : Dia : 10 / 11 / 12 mm. Height: in 25mm (1 ") & 38 mm (1.1/2")

LEVER BRAKE '

Available in : RD 1, RD 2, RD 3

FIXED CASTORS EXPLANATION OF CASTOR CODES AND LOAD CAPACITIES

i,--· Swivel Castor Codes & Load Capacities. ··1.RD5/PT/RT/150

Code of Caslor with : � Plain bearing wheel : ( Example: ( j Load Capacttv .u.ndar � 370 kgs ! : Ideal & Average Cond1Hons. C d I C I ·th : \ RD5/PT/RT/150/R +-n�n!r

0ee:r�n°; =�eel swive1.l

··················································································••·································•·

( lligid (Fixed) Cas�::/��::i� ! L:�r:���;��s

. J : Example: : i Load Capacity under� 370 kgs i \ Ideal & Average Conditions. Code ol castor wilh j

'... ....................................... �.��.(_�(�!.(�.�.�'..� ... +-Roller Bearing.wheel swivel)

TOP FIXTURES AVAILABLE

ENP EXPANDING NYLON PLUG

1

SP ROUND SOLID PLUG

Sizes Available : 15, 20, 22, 25 mm

ERP EXPANDING RUBBER PLUG

Sizes Available : 20mm / 22mm

I

SSP SQUARE STEEL PLUG

BRAKES/ FOOT BRAKES/ WHEEL LOCKS AVAILABLE

SWIVEL & WHEEL BRAKE FRONT BRAKE '

Available in : RD 4, RD 5 Available in : RD 4, RD 5

ESP EXPANDING STEEL PLUG

Sizes Available : 20mm / 22mm

TH

MB Also available (M10, M12)

THREADED PINS Sizes Available :

in M 8 / M 10 / M 12

FRONT BRAKE

Available in : RD 1

SIDE BRAKE WHEEL LOCK

Available in: RD 4, RD 5 Available in : RD 4, RD 5

C Castor with

CAST IRON WHEEL

NT NYLON BONDED

CAST IRON WHEEL

PUN POLYURETHANE MOULDED ON NYLON CENTRE WHEEL

WHM WHITE VIRGIN QUALITY

ULTRA HIGH MOLECULAR POLYMER WHEEL

CHOICE OF WHEELS AVAILABLE

CR HARD RUBBER WHEEL

p REINFORCED PHENOREX

FIBRE WHEEL

R RUBBER WHEEL

CTN RUBBER CUSHION TYREO ON

NYLON CENTRE WHEEL

pp POLYPROPYLENE WHEEL

RPU POLYURETHANE TYREO

CAST IRON WHEEL

N NYLON WHEEL

PT PHENOREX FIBRE TYREO

CAST IRON WHEEL

RT RUBBER TYREO

CAST IRON WHEEL

=

1T

0· .

0 .

..-4 -

0 0 Quality CD Endorsed 0 Company tll Ce�ifica1ion .,_.. No: QECl 3252

k-o

C

'!i'._ -

801 SERIES

bi Iii Iii LIGHT DUTY LOADS UP TO 36 KGS. Suitable for use on all light domestic, office & hospital equipments

69.5 -�----.-•--- --------·

55�---- -----1

11.3

rt-{1w

"'" 0, C") "'"

♦ � I -....__::__ ____ -t------.c.......6....__ L

PT "'--Rs

■l,.,..._....

.. -,-with with

: Blind Hole Top Plate (BH) (PT)

··"castorswithC

r'C\r Delai!s Re!cr Page US

Castors:· with CTN

fo; Oetai!s Re:c! fl;igf! Ofi

Castors with N ,

38 20 61 66,5 21.5 (1½")

RD1 / PT/ C / 38 L.C. 25 kgs.

RD1 / F / C / 38

50 22 72 75 21.5 (2")

RD1 / PT/ C / 50 L.C. 36 kgs.

RD1 / F / C / 50

Expanding Rubber Plug (ERP) top fixture available in 2 sizes: 20 mm(3/4") & 22 mm (7/8")

RD1 / PT/ CR / 38 L.C. 25 kgs.

RD1 / F / CR/ 38

RD1 / PT / CR / 50 L.C. 25 kgs.

RD1 / F / CR / 50

RD1 / PT/ CTN / 50 / R L.C. 20 kgs.

RD1 / F / CTN / 50 / R

RD1 / PT/ N / 38 L.C. 25 kgs.

RD1 / F / N / 38

RD1 / PT/ N / 50 L.C. 25 kgs.

RD1 / F / N / 50

-- =

. -:::

PLATE OPTIONS AVAlLABLE tm Swivel Castors

57

%%C6.4, L __ 31_

3 NOS. ON 32.5 ,0 RC,D,EQUISP�_..........-

73

;-r·T !�I !,NJ�t J 1 M j

J � ! -+-----+--+--+--+--+---+-- ... 1. I

I' FRPT

...."'

PLATE OPTIONS AVAILABLE !or fixed (Rigid) Castors

42.5

58

RD1/F

N ""

�-�<-t--------L

TOP FIXTURES OPTIONS .AVAIL.ABLE BRAKE OPTIONS AVAILABLE

ERP ESP KP TH SP BH

for(Ma,is Re/e� P.!ge 04

Castors Castors Ca,IOm 0 Castors Castors Castors with with with with with with

p pp PUN R RT WHM ForOela\is For!Jefo!!� ForOe!ai:s forOel<"!i!f Fot0C!3i!S- ForDet;si!f;

Rai'ilr PQgs OS Reier P�:ie OS Heie: Paoe 05 Rsfer ?age 05 Refer ?;,ige GS R&tef P<1ga OS

¥:J•���f�T1�c�� r;�l� �i!��0

8�;t��e�yti

cEj�� �1iva�: �:\°8�t1r:tt,cE.�t���,t �;,e�:::��c

(JZJ ti�� =a�:�'c1fi\!:;aeit Cat�o8ue Reference ror Sw?vel 8 Fi� ostora wltn Load Gap.1cb)'

RD1 / PT/ P / 38 AD1 / PT / PP / 38 RD1/ PT/ R / 38 L.C. 25 kgs, L.C. 20 kgs. L.C. 16 kgs.

RD1 / F / P / 38 RD1 / F / PP / 38 RD1 / F / R / 38

RD1 / PT/ P / 50 RD1 / PT/ PP/ 50 RD1 /PT/ PUN/ 50 / A RD1/ PT/ A/ 50 RD1 / PT/ RT/ 50 / R RD1 /PT/ WHM / 50 / R L.C. 30 kgs, L.C. 25 kgs. L.C. 30 kgs. L.C. 18 kgs, L.C. 27 kgs. L.C. 28 kgs.

RD1 / F / P / 50 RD1 / F / PP/ 50 AD1 / F /PUN/ 50 / R RD1 / F / R / 50 AD1 / F / RT/ 50 / R RD1 / F / WHM / 50 / R

Note: Tolerance on the wheel diameter 'D' upto & including 100 mm shall be± 2 mm and tor the diameters greater than 100 mm shall be :t 2 percent(%)

SIZES : 63/75

01'" 0· '

0 . ._. -0 0 Quality c,) Endorsed 0 Company

tll Certification ....,. No: QECl 3252

UNDER DEVELOPMENT

'V RD 2 SERIES

■1-I

wilh with

; Blind Hole Top Plate (BH) (PT)

50 22 (2')

79.5 84

63 22 (21/2")

83.5 88

75 22 102.5 106 (3")

100 22 127.5 132 (4")

�il,1111 LIGHT DUTY LOADS UP TO 70 KGS. Suitable for use on all light domestic, office & hospital equipments

SlN\JDARD PLATE for Swivel Castors

92

7 4 ., 6.4,4 Nos. -�*t-·

+ 4-------4-+-+---- ---+--� �

M l!?

11.3

PT

Caslors Gastors Castors

with wilh with

C CR CTN ForDor.11, farDehllb for Oetalis

fh1!flrPqo'1ft Put" Poi,•llli Rele, !?3gt 05

Catal"8uo Rofemn,e·for Swl,el•& Fixoo astom wlltl LoM Cao.ictty

Ca1a1°8ue �e1eraoc� 111rSWivel & Axed Mtom Witll I.Dad C2jlatll)'

Cillo!o� Reference for SW!Vel-& Axed 1a<s With l.llarl Cilpatity

RD2 /PT/ C / 50 / R RD2 / PT/ CR / 50 / R RD2 / PT / CTN / 50 / R

19.5 L.C. 55 kgs. L.C. 36 kgs. L.C. 27 kgs.RD2 / F / C / 50 / R RD2 / F /CR/ 50 / R RD2 / F / CTN / 50 / R

RD2/PT/C/63/R RD2 / PT/ CR/ 63 / R RD2 / PT/ CTN / 63 / R

19.5 L.C. 55 kgs. L.C. 36 kgs. L.C. 27 kgs. RD2 / F / C / 63 / R RD2 / F / CR / 63 / R RD2 / F / CTN / 63 / R

RD2 / PT/ C /75 / R RD2 / PT/ CR /75 / R RD2 / PT/ CTN / 75 / R

19.5 L.C. 65 kgs. L.C. 36 kgs. L.C. 27 kgs.RD2 / F / C /75 / R RD2 / F / CR/ 75 / R RD2 / F / CTN / 75 / R

RD2 / PT/ C / 100 / R RD2 / PT/ CR/ 100 / R RD2 / PT/ CTN / 100 / R

20.5 L.C. 65 kgs. L.C. 39 kgs. LC. 27 kgs. RD2 / F / C / 100 / R RD2/F/CR/100/R RD2 / F /CTN/ 100 / R

Castors with

N •

forOeiUIIS .-Hi:iferPa1i=Oli

C•r�oguo R<!arnnce tor s� Fixe ,,:;;f01s wnhloa.d ca

RD2 / PT/ N / 50 / L.C. 40 kgs.

RD2 / F / N / 50 /

RD2/PT /N/63/

L.C.40 kgs.RD2 / F / N / 63 I

RD2 / PT/ N /75 / L.C. 40 kgs.

RD2 / F / N /75 /

RD2 /PT/ R/ 100, LC. 40 kgs.

RD2 / F / N / 100 /

Also available : Phenorex wheel : Add code P to Cat Ref. / Wheel Brake Add code BK to Cat Ref / Thread Guards : Add code TG to Cat Ref./ Tringular Plate : Add code TPT to Cat Ref.

-

- -

- -

PLATE OPTIONS AVAILABLE for Swivel Gaslots

70.5

62

62 X62

PLATE OPTIONS AVAiLABLE for fixed (Rigid) Castors

+

70

55

-+-

�/

RD2/F

39

19

108

TPT

+ +-};, :i3 '-!-.(\!£:i...

+ �-I I

60

80

80X80

TOP FIXTURES OPTIONS AVAILABLE

ERP ESP KP

Castors Castors with with

p pp

For0e1..i!is For Dela!ls fiah:,r Page OS Rttet Pani; rfa

=�:t'�':��i:.�: Camlo2uc Roferooce for Sw1vel & Fixed �stors w;th Load Capac1r1

RD2 / PT/ P / 50 / R RD2 / PT/ PP / 50 / R L.C. 50 kgs. L.C. 32 kgs.

RD2 / F / P / 50 / R RD2 / F / PP / 50 / R RD2 /PT/ P /63 / R R02 / PT/ PP / 63 / R

L.C. 55 kgs. L.C. 32 kgs. RD2 / F / P / 63 / R RD2 / F / PP / 63 / R RD2 / PT / P /75 / R RD2 /PT/ PP /75 / R

L.C. 65 kgs. L.C. 32 kgs.RD2 / F / P /75 / R RD2 / F / PP /75 / R

RD2/PT/P/100/R RD2 / PT/ PP/ 100 / R L.C. 65 kgs. L.C. 32 kgs.

RD2/F/P/100/R RD2 / F / PP/ 1 OD / R

TH SP

with

PUN • Fiir tie!aiis

'"'"' 0 S!i�l\r Page 05

�:�t�ft����J�� �"/;'.�� RD2 /PT/ PUN/ 50 / R

L.C. 45 kgs. RD2 / F /PUN/ 50 / R RD2 / PT/ PUN / 63 / R

L.C. 45 kgs. RD2 / F / PUN / 63 / R RD2 /PT/ PUN/ 75 / R

L.C. 45 kgs.RD2 / F /PUN/ 75 / R

RD2 / PT/ PUN / 1 OD / R L.C. 45 kgs.

RD2 I F / PUN / 1 OD / R

DH

Castors

with

R ForDe111Us

nelerl'i11<M

�"8:1�t, n't;�� i�irb�RD2 / PT/ R / 50 / R

LC. 27 kgs. RD2 / F / R / 50 / R R02/PT /R/63/R

L.C. 27 kgs.RD2/F/R/63/R RD2 / PT/ R /75 / R

L.C. 27 kgs. R02 / F / R /75 / R

RD2/PT/R/100/R L.C. 27 kgs.

RD2/F/R/100/R

-------- 83 --- _ _,' 63 i l ; "'--1. l

_ch_ _ch_ -1 l 'f '+' 1:'

-+----+--+--+---t-� �tj

s.s I

'------+----"--��=�! 83 X 83

BRAKE OPTIONS AVAILABLE

Fo(Oetalls Aefct Page 05

Catalogue Rete�ce for SWM1I &. Fl:<e<l Casto� with lll� Capacity RD2/PT/RT/50/R

L.C. 40 kgs.RD2 / F /RT/ 50 / R RD2 / PT/ RT/ 63 / R

L.C. 40 kgs. RD2 / F / RT/ 63 / R RD2 / PT/ RT /75 / R

LC. 40 kgs. RD2 / F / RT /75 / R

RD2 /PT/ RT/ 100 / R L.C. 40 kgs.

RD2 / F / RT/ 100 / R

Castots with

WHM For Oel1ii!s

Rel�, Pa�e 05

Catalo!JIJ� Ael\S';nco !Qr Swivel & Fixed Castors W,lh Load Capactty RD2/PT /WHM/50/R

L.C. 45 kgs .. RD2 / F / WHM / 50 / R RD2 / PT/ WHM / 63 / R

L.C. 45 kgs.RD2 / F / WHM / 63 / R RD2 / PT/ R / 75 / R

L.C. 45 kgs. ROZ/ F / WHM / 75 / R

RD2 / PT/ WHM / 100 / R L.C. 45 kgs.

RD2 / F / WHM / 100 / R Note: Tolerance on the wheel diameter ·o• upto & including 100 mm shall be :t 2 mm and tor the diameters greater than 100 mm shall be,± 2 percenl (%)

=1'· =· e

■

.... - . e � e Quality 0) Endorsed 0 Company

c:ll Certification ....,. No:QEC13252

w "'...a.

,.£... -

:,

C I

RD 3 SERIES

■1-I

with with

; Blind Hole Top Plate (BH) (PT)

63 28 (2½")

87 91

75 28 104.5 108.5 (3")

100 28 129 132

(4")

125 28 154.5 158.5 (5")

bil,1111 MEDIUM DUTY LOADS UPTO 135 KGS. Suitable for medium duty Industrial & Hospital equipments.

STANDARD PLATE for Swivel Castors

96 -------- --- - - ---

29

29

29

29

79.5

PT

Castors with

C �,ni11111h1

�ef1Jr P1oe05

\_11.3

Castors with

CR Fa, D01ai11

Rollf r,,, OS

, R4'-'--

�:J°l'ir!��°[J� ti.�� w.l�g: ,:J'!ii�cr:� �:�M RD3 / PT/ C / 63 / R RD3 / PT/ CR / 63 / R

L.C. 90 kgs. L.C. 55 kgs.RD3 / F / C / 63 / R RD3 / F / �R / 63 / R RD3 / PT/ C /75 / R RD3 / PT/ CR /75 / R

L.C. 90 kgs. L.C. 55 kgs.RD3 / F / C /75 / R RD3 / F /CR/ 75 / R

RD3 / PT/ C / 100 / R RD3 /PT/ CR/ 100 / R L.C. 100 kgs. L.C. 60 kgs.

RD3 / F / C / 100 / R RD3 / F / CR / 100 / R RD3 / PT/ C / 125 / R RD3 / PT / CR / 125 / R

L.C. 100 kgs. L.C. 60 kgs. RD3 / F / C / 125 / R RD3 / F /CR/ 125 / R

Castors Caslors wUh with

CTN N •

fo, �,1,111 Rtilar f'lt1t 05

��1•J08�:t�r�

1�t'l,"�ci�l i�;v:!: ��:�

08�:t�r�f�1ticccii� t1� RD3 / PT/ CTN / 63 / R RD3 / PT/ N / 63 /

L.C. 45 kgs. L.C. 70 kgs.RD3 / F / CTN / 63 / R RD3 / F / N / 63 /I RD3 / PT/ CTN / 75 / R RD3 / PT/ N /75 /

L.C. 45 kgs. L.C. 70 kgs.RD3 / F / CTN /75 / R RD3 / F / N /75 /I

RD3 /PT/ CTN/ 100 / R RD3 / PT/ N / 100 / L.C. 50 kgs. L.C. 75 kgs.

RD3 / F / CTN / 100 / R RD3 / F / N / 100 / RD3 /PT/ CTN/ 125 / R RD3 / PT/ R / 125 /

L.C. 50 kgs. L.C. 75 kgs. RD3/F/CTN/125/R RD3 / F / N / 125 /

Also available : Brake attachment: Add code BK to Cat Ref / Thread Guards : Add code TG to Cat Ref / Triangular Plate· Add code TPT to Cat Ref

-

PLATE OPT!ONS AVAILABLE tor Swivel Castors

I

-�

�

+

+ 1-,-

110

89

FOR &6 BOlJS 80

FOR d 8 BOLTS

l"1'

'\:&-STANDARD TS3 & TF3 � .."'""

SERIES

�-110 X 80

+ '>cl'\ \,��

l -

� I

60 80

80 X 80

g 0 .,

PU\TE OPTIONS A\/A!Lt\f:lLE for flx1;ct (Rlgitl) Caslors

95

82

80

g

TPT 83

r r---�-·-6_3 ---;

-+----+-+--+---1-ra �

83 X 83

TOP FIXTURES OPTIONS AVAILABLE

ERP ESP KP

Castors Castors

with· with p pp

For iJ:Q!.u!s Fe, ll1'11�• fo:!c; Pave 05 R"tflrfl1t_9_ttll'S

��J08�����fil\ceo�J �:���J f:ik>�t�g��t"1.;'�t:�t

RD3 / PT/ P / 63 / R RD3 / PT/ PP I 63 / R L.C. 80 kgs. LC. 55 kgs.

RD3 / F / PI 63 / R RD3 / F / PP / 63 / R

RD3 / PT/ P /75 / R RD3 / PT/ PP /75 / R L.C. 80 kgs. L.C. 55 kgs.

RD3 / F / P /75 / R RD3 / F / PP /75 / R

RD3 / PT I P I 100 / R RD3 / PT/ PP / 100 / R L.C. 80 kgs. L.C. 60 kgs.

RD3 / F / P I 100 / R RD3 / F / PP I 100 / R

RD3 /PT/PI 125 / R RD3 / PT/ PP/ 125 / R L.C. 90 kgs. L.C. 60 kgs.

RD3 / F / P / 125 /R RD3 / F / PP I 125 / R

TH SP

with

PUN •

f<><D•�I•

Casto,s 0Re!orl'IQ• D5

�:B����:�� t�M RD3 / PT/ PUN / 63 / R

L.C. 65 kgs. RD3 / F /PUN/ 63 / R

RD3 /PT/ PUN /75 / R L.C. 65 kgs.

RD3 / F /PUN/ 75 / R

RD3 / PT/ PUN / 100 / R L.C. 70 kgs.

RD3 / F / PUN / 100 / R

RD3 /PT/ PUN/ 125 / R L.C. 70 kgs.

RD3 / F /PUN/ 125 / R

BH

Castors

wllh A

For Datall& RelorP1111115

��1R�lerence lor Swivol & sors Lo.ldcapacl!Y

RD3 / PT/ R / 63 / R L.C. 38 kgs.

RD3 / F / R / 63 I R

RD3 / PT/ R /75 / R L.C. 38 kgs.

RD3 / F / R /75 / R

RD3 / PT/ R / 100 / R L.C. 42 kgs.

RD3/F/R/100/R

RD3 / PT/ R / 125 / R L.C. 50 kgs.

RD3 / F / R / 125 / R

, _______ 90 ----·---· 72

: r 67 - ·7

! ·1 .

90 X 90

BRAKE OPTIONS AVAiLABLE

Castors

with

RT fotl!>t•il• ftif !Jeta'.l'.i

AtltrhgoOS Re!e, i'aQC OS

fi��•8:��'�"�0e:;B��,t ��(:;teroncei: �rJ:�

RD3 / PT I RT/ 63 / R RD3 / PT/ WHM / 63 / R LC. 60 kgs. L.C. 80 kgs.

RD3/F/RT/63/R RD3 / F / WHM / 63 I R

RD3 / PT/ RT/ 75 / R RD3 / PT/ WHM / 75 / R LC. 60 kgs. L.C. 80 kgs.

RD3 / F / RT /75 I R RD3 / F / WHM /75 / R

RD3 / PT/ RT/ 100 / R RD3 / PT I R / 100 / R L.C. 60 kgs. L.C. 90 kgs.

RD3 / F /RT/ 100 / R RD3 / F / WHM / 100 / R

RD3 / PT I RT/ 125 / R RD3 / PT/ WHM / 125 / R L.C. 60 kgs. L.C. 90 kgs.

RD3 / F /RT/ 125 / R RD3 / F / WHM / 125 / R

Note: Tolerance on the wheel diameler 'D' upto & including 100 mm shall be .t 2 mm and tor tne diameters greater than 100 mm shall be± 2 percent(%)

=1 1'• =· = C\1 ■ ...-t -

0 Quality 0) Endorsed 0 Company Cll Certificolion """"No:QEC13252

D:>

f

C )

l..._!_..

RD4SERIES

■1-I

wilh with

: Blind Hole Top Plate (BH) (Pn

75 38 108 115 (3")

100 38 132.8 140 (4")

125 38 157.5 165 (5")

�il:1111 MEDIUM/ HEAVY DUTY LOADS UPTO 265 KGS. Suitable for Heavy duty Industrial trolleys & Canteen equipments. Rectangular TOP PLATE CASTORS Both the swivel castors & the matching fixed brackets are designed to withstand arduous conditions. The large diameter swivel has a hardened ball track and is fitted with a swivel seal as standard. Wheel lock & wheel/swivel lock can be fitted to 4" & 5" Dia. Castors.

STtiJ,JDARD PL.ATE

for Swlve! Castors 154

--- -------�------------- --

r

+-

125

%%CB.4,

4 Nos.

-1-- - - - - --+--I--!-+-------+--� 0 C')

+

on

21

PC.D.

PT

BRAKE OPTIONS AVAILABLE

Caslors with C

For Details

Reier Page 05

�°8��1;8,c�t��

RD4 / PT/ C / 75 / R 34 L.C. 190 kgs.

RD4/F/C/75/R

RD4 /PT/ C / 100 / R 34 L.C. 210 kgs.

RD4/ F /C / 100 / R RD4 /PT/ C / 125 / R

38.5 L.C. 210 kgs. RD4/F/C/125/R

TOP F!XTURES OPTIONS AVAILABLE

TH SP

Caslors with CTN

For Oetill< RolorPoG• os

Gai;jl�u• Reference I� SWlwl &>

F�ed a� Wlllr lD �acify

RD4/ PT/ CTN /75 / R L.C. 125 kgs.

RD4 / F / CTN /75 / R RD4 /PT/ CTN/ 100 / R

L.C. 125 kgs.RD4 / F /CTN/ 100 / R

RD4 /PT/ CTN/ 125 / R L.C. 125 kgs ..

RD4 / F /CTN/ 125 / R

BH

Castors with

N Fo, Doi•"'

Aolor Pao• qi;

Calalo8�a �,r,"""'" J� SWM!I &. F�� ast�f$ ..,lM.D capaci\y

RD4/ PT/ N / 75/ R LC, 145 kQS,

RD4/ Fi H /75 / R RD4/PT/N/.100/R

LC.150 kgs. RD4/F/ N/100/R RD4 i PT /N / 125 / R

LC. 210 kgs.

RD4 / F / N / 125/ R

Castors .

with

NT

Forllot� Rol11 l'a�o 05

�1��J0

8�:1��":-r1�0rdf � �tt RD4/PT/NT/75/

L.C. 160 kgs.RD4/F/NT/75/I

RD4/PT/NT/100/ L.C. 160 kgs.

RD4 / F /NT/ 100 / RD4/PT/NT/125/

L.C. 175 kgs. RD4 / F /NT/ 125 /

Also available : Wheel Brake : Add code BK to Cat Ref / Thread Guards : Add code TG to Cat Ref./ Tringular Plate : Add code TPT to Cat Ref. / Roller Bearing in the wheel available : Add RB to Cat Ref.

PLATE OPT!ONS AVAILABLE for Sw�el Castors '"'

+ t !

105 1\6 137

RD4 ADPT

94X 94

140

TPT

PUl.TE OPTIONS AVAILABLE ror Fixed (Rigid) Castors

143

0

Castors Cast.ors with With

p pp For11<ti111• fo<O.lli\s

FlderP1111i,� Rofin"PM1ellli

�i��aa□

s�!t�r�f���

C(o�J 6�J��it �i!1

ados�:t�r�f���c(offJ ��J�11rt�

RD4 / PT/ P /75 / R RD4 / PT/ PP /75 / R LC. 160 kgs. LC. 125 kgs.

RD4 / F / P /75 / R RD4 / F / PP /75 / R RD4 / PT/ P / 100 / R RD4 / PT/ PP/ 100 / R

LC. 210 kgs. LC. 125 kgs. RD4 / F / P / 100 / R RD4 / F / PP / 100 / R RD4 /PT/ P / 125 / R RD4 / PT/ PP / 125 / R

LC. 210 kgs. LC, 135 kgs. RD4 / F / P / 125 / R RD4 / F / PP / 125 / R

@ :.:

Far D<t,II,

=1

™

c:, � ■ � !

....,,t -c:, �

bi�J l1i I 11Mil11lt\

C:, Quality 0) Endorsed 0 Company

fll Certification ....,. No:QEC13252

SCAFFOLD CASTORS S.W.L. upto 265 Kgs. RD4 / SCAFF SERIES are fitted with wheel lock and swivel seal and are provided with either socket or spring loaded solid plugs. Load capacity in addition to the Dynamic loads SAFE working SWL static loads are also shown in table.

WHEEL/ SWIVEL LOCK COMBINE

SPRING LOADED SOLID PLUG Spring loaded plug size: SPS 1 : 1 3/8" x 5" long SPS 2 : 1 1/2" x 5" long

SCAFF TYPE SOCKET SIZES 4" & 5" Castors­SCF 1 : 3 1/2" long to fit 1 3/4" dia.

DATA FOR SCAFFOLDING TYPE TOP FIXTURE

■I,, •. , I " I

:

100 38 135 (4") (11/2") (5 5/16")

125 38 158.8 (5") (11/2") (61/4")

34 Rubber Tyred (RT) Cast Iron (C)

(111/32") Nylon (N) Phenorex (P)

38 Rubber Tyred (RT)Cast Iron (C)

(1 1/2") Phenorex (P)

Roller and Ball Bearing also available at an extra cost.Finish-Bright zinc Galvanized.

Castors Castors with with

PUN RPU �rna!IJ1, f•r Pol>II•

SOCKET FITTING

Ill■ I Calalog llelerence

In Kgs.

13 5 225 225 225

160 265 225

In Kgs.

2 25

225

RD4 / SCF 1 /RT/ 100 RD4 / SCF 1 / C / 100 RD4 / SCF 1 / N / 100 RD4 / SCF 1 / P / 100

RD4 / SCF 1 / RT/ 125 RD4 / SCF 1 / C / 125 RD4 / SCF 1 / P / 125

Note; Tolerance on the wheel dlllmeler 'D' upto & lnclulllni 1 OD mm shall be tu 2 rrrmand lor the

diameters grealsr han 100 mm shall 8.±. 2 percent(%)

Castors Castors wilh with

RT WHM FDrDf.lltlb Ft1r-Ovb1�1 Rol,r f'Qu, Hefel P-B!,ilEl05 Af!Jar P!gl! 1!5 R11lcr Pa.i:e OS Rclo,hgo05

c,tlll°Bue Rett�to"r &,•l•e\tAirea . aslors illl ad -pac RD4 / PT/ PT/ 75 / R

LC. 175 kgs. RD4 / F / PT /75 / R

RD4/ PT/ PT/ 100 / R LC. 175 kgs.

RD4 / F / PT/ 100 / R RD4 / PT/ PT/ 125 / R

LC. 190 kgs. RD4 / F / PT/ 125 / R

Cata108ui Rl!f��ce t� 8wiv<I ·&F�ed a,t,;,rs t Lo a?aCltt RD4 / PT/ PUN /75 / R

LC. 150 kgs. RD4 / F / PUN /75 / R

RD4 /PT/ PUN/ 100 / R LC. 150 kgs.

RD4 / F / PUN / 100 / R RD4 / PT/ PUN / 125 / R

LC. 160 kgs. RD4 / F / PUN / 125 / R

Camlnau• Fie!�ftli'Thl.OJ.tri & Fb<ed astors w , ac,ty RD4 / PT/ RPU / 75 / R

LC. 160 kgs. RD4 / F / RPU /75 / R

RD4 / PT / RPU / 100 / R L,C. 160 kgs.

RD4 / F / RPU / 100 / R RD4 / PT / RPU / 125 / R

LC. 170 kgs. RD4 / F / RPU / 125 / R

-Oalalor.; Refa'l!ll'j' f,°,i s=r�td aslars wtt Ul apse RD4 / PT / RT/ 75 / R

LC. 80 kgs. RD4 / F / RT /75 / R

RD4 /PT/ RT/ 100 / R LC. 115 kgs.

RD4 / F / RT/ 100 / R RD4 / PT / RT / 125 / R

LC. 160 kgs. RD4 / F / RT/ 125 / R

�:rs��.i1��'ilfil e�1M RD4 / PT / WHM /75 / R

LC. 1 45 kgs. RD4 / F / WHM / 75 / R

RD4 / PT/ WHM / 100 / R LC. 150 kgs.

RD4 / F / WHM / 100 / R RD4 / PT/ R / 125 / R

LC. 210 kgs. RD4 / F / WHM / 125 / R

Nole: Tolerance on lhe wheel diameter 'O' upto & including 100 mm shail be_+ 2 mm and ior the diameters greater than 100 mm shall be.± 2 percent{%)

!(;o

m r

RD5SERIES

\U+2205 10. 5 NOS. ON 45 PCO. EQUI.

■1-I

wllh wllb I Blind Hole Top Plate

(BH) (l'l)

150 44.5 196.8 204 (6")

200 50 242.8 250 (8")

�11;1111 MEDIUM/ HEAVY DUTY CASTORS. LOADS UPTO 820 KGS. Suitable for medium duty Industrial, Warehousing & Commercial Applications equipments. Rectangular TOP PLATE CASTORS Both the swivel castors & the matching fixed brackets are designed to withstand arduous conditions. The large diameter swivel has a hardened ball track and is fitted with a swivel seal as standard. Wheel lock & wheel/swivel lock can be fitted to 6" & 8" Dia. Castors.

STANDARD PLATE for Swivel Castors

166

140

+

STAf�DARD PLATE for Fixed (Rigid) Castors

+- + 166 X 137

TOP FIXTURES OPTIONS AVA!l/-1.BLE

£� SP SCAFOLDING

fo, Dt>tails Refer Page 04

Castors wHh

C ForD•tllll

Roto1P1gtll5

�°8��:�11°Co1�d �fJ�i1;J RD5 / PT/ C / 150 / R

44.5 L.C. 410 kgs.

RD5 / F / C / 150 / R

RD5 / PT/ C / 200 / R

44.5 L.C. 410 kgs.

RDS/ F / C / 200 / R

142 X 110

BRAl<E OPTiONS AVAILABLE

WHEEL LOCK OPTIONS AVA!LA.BLE

�

Castors with

CTN

�i!18d08�:t�r�f�flgcco�J �:J�i1it

RD5 / PT/ CTN / 150 / R LC. 250 kgs.

RD5/F/CTN/150/R

RD5 / PT/ CTN / 200 / R L.C. 250 kgs.

RD5/ F /CTN/ 200/ R

� For l)e\ai:s Rclc-r Page 04

Castors with

N • f<Jfl»!llll F111Del1Rr

Ref�r Pagl! 05 ll<lorPlllf D�

���ad08�;t�r�t�flgccaf�J BrJ�i1it ca;1J-°8ue Reference for Bwivel & Fii<e asters with Load apacity

RD5 / PT/ N / 150 / R RD5 /PT/ NT/ 150 / R LC. 310 kgs. LC. 350 kgs.

RD5 / F / N / 150 / R RD5/F/NT/150/R

RD5 / PT/ N / 200 / R RD5 / PT/ NT/ 200 / R LC. 310 kgs. LC. 360 kgs.

RD5 / F / N / 200 / R RD5 / F / NT / 200 / R

1. Ball Bearing in the wheel available al an extra cost. 2. FINISH: Bright Zinc Galvanized.

6l§d id I 11tfti11Jlt\ SCAFFOLD CASTORS S.W.L. upto 820 Kgs. RD5 / SCAFF SERIES are fitted with wheel lock and swivel seal and are provided with either socket or spring loaded solid plugs. Load capacity in addition to the Dynamic loads SAFE working SWL static loads are also shown in table.

WHEEL/ SWIVEL LOCK COMBINE

SPRING LOADED SOLID PLUG Spring loaded plug size: SPS 1 : 1 3/8" x 5 ' long SPS 2 : 1 1/2" x 5" long

SCAFF TYPE SOCKET SIZES 6" & 8" Castors-SCF 2 : 4' long to fit 2' dia.

DATA FOR SCAFFOLDING TYPE TOP FIXTURE

■I ..•..I ' I

:

44.5 150 (1 3/4") 197

(6") 50 (7 3/4") (2")

200 50 243 (8") (2") (9 9/16")

Rubber Tyred (RT) 44.5 Cast Iron (C)

(1 3/4") Nylon (N) Phenorex (P)

44.5 RubberTyred (RT) Cast Iron (C)

(1 3/4") Nylon (N) Phenorex (P)

SOCKET FITTING SPRING LOADED SOLID PLUG FITTING

Dynamic Slali�Capacity Capacity

S.W.L.

In Kgs. In Kgs.

370 410 820 410 410

500 820

Stalic Catalog Reference Capacity Catalog Reference

S.W.L.

In Kgs.

RD5 / SCF 2 / RT/ 150 RD5 / SPS 1 /RT/ 150 RDS/ SCF 2 / C / 150 820 RDS/ SPS 1 / C / 150 RD5 / SCF 2 / N / 150 RD5 / SPS 1 / N / 150 RD5 / SCF 2 / P / 150 RD5 / SPS 1 / P / 150

RD5 / SCF 2 /RT/ 200 RDS/ SPS 1 / RT/ 200 RD5 / SCF 2 / C / 200 820 RD5 / SPS 1 / C / 200 RDS/ SCF 2 / N / 200 RDS/ SPS 1 / N / 200 RDS/ SCF 2 / P / 200 RD5 / SPS 1 / P / 200

• Roller and Ball Bearing also available al an extra cost. • Finish-Bright zinc Galvanized. Note: Tolerance on the wheel diameter 'D' �to & including 100 mm shall be + 2 mmand for lhe diamelers gre er lhan 100 mm shall be.± 2 percent (%)

Castors Castors �·�o Castors Castors Castors with with with with with with

p PT F��I�• t

RPU RT WHM ..... Dolal!t ftlrDt!mli F�•llil�II Flllllmll< Forllmll<

Rr,ferP, .. C& Raio, P�g• 05 Rol,r P'llo OS flllle, l'lg105 Roo Pago OS RelBI P>i,o 0�

�:n�:1�,����c�o�J ��p��1it ri���

O

B�!t�����c

co�OJ ��J��i; ����

0

8�it�r����c

co�0J g�J��1it ¥::�

0

8�:t�r����c

co�O

J �:J��lit

Ca�ue Reference for Swivel & flxell aslors wilh Load Capacity �::�

0

8���.����%�J ��:O�it RDS/ PT/ P / 150 / R RDS / PT/ PT/ 150 / R RDS / PT/ PUN / 150 / R RDS / PT/ RPU / 150 / R RDS / PT/ RT/ 150 / R RDS/ PT/ WHM / 150 / R

L.C. 410 kgs. L.C. 430 kgs. L.C. 310 kgs. L.C. 400 kgs. L.C. 370 kgs. L.C. 430 kgs. RDS/ F / P / 150 / R RDS/ F / PT/ 150 / R RDS/ F / PUN / 150 / R RDS / F / RPU / 150 / R RDS/ F /RT/ 150 / R RDS/F/WHM/150/R

RDS / PT/ P / 200 / R RDS / PT/ PT/ 200 / R RDS / PT/ PUN / 200 / R RDS / PT/ RPU / 200 / R RDS / PT / RT/ 200 / R RDS / PT/ WHM / 200 / R L.C. 41 0 kgs. L.C. 430 kgs. L.C. 310 kgs. L.C. 400 kgs. L.C. 410 kgs. LC. 430 kgs.

RDS / F / P / 200 / R RDS / F / PT/ 200 / R RDS / F / PUN / 200 / R RDS / F / RPU / 200 / R RDS / F / RT/ 200 / R RDS / F / WHM / 200 / R Nole: Tolerance on the wheel diameter 'D' upto & inclilding 100 mm shall be± 2 mm and !or the diameters greater than mo mm shall be± 2 percenl {%}

II" ..... -

c:, C:, Quality 0) Endorsed 0 Company

{ll (ertmco1ion...,. No:QEC13252

l,.Q -r-