Upload
holly-webster
View
236
Download
0
Embed Size (px)
Citation preview
Chapter 1 – Prime Movers
• Mechanical Systems – Force
• Fluid Systems – Pressure
• Electrical Systems – Potential Difference (Voltage)
• Thermal Systems – Temperature Difference
Define Force
• A force is a push or a pull
• It can be transmitted through direct contact such as a rod, chain, rope, mechanical linkage, etc
• It can also be transmitted without direct contact. Examples: gravity, magnetism
Measuring Forceand other things
• Base quantities – these form the basis of all other measurements.
• For example, length is a base quantity, so is time. By dividing length by time, we derive the quantity of speed.
• Another example of a derived quantity is area. Area is length times length or length2. Volume is length3.
Base QuantitiesQuantity Metric
(SI) unitMetric symbol
English unit
English symbol
length meter m foot ft
mass kilogram kg slug
time second s second s
Temperature Kelvin K Fahrenheit oF
Electric current
Ampere A
Amount of substance
mole mol
Light intensity
candela cd
Metric System Prefixes
• The metric system uses prefixes in front of a unit to indicate a large or small amount of that unit.
• Examples – kilo means 1000. Thus a kilometer equals 1000 meters. Centi means one hundredth. Thus a centigram is one hundredth of a gram. 100 centigrams equals one gram
Common prefixes you should know
prefix exponent symbol meaning example
Tera 1012 T trillion terawatt
Giga 109 G billion gigabyte
Mega 106 M million megaton
Kilo 103 K thousand kilogram
centi 10-2 c hundreth centimeter
milli 10-3 m thousandth milliliter
micro 10-6 millionth microsecond
nano 10-9 n billionth nanometer
pico 10-12 p trillionth picofarad
Back to Force
• In the SI (metric) system, force is measured in Newtons (N). In English units, it is measured in pounds (lb).
• Newtons is a derived quantity. It is the amount of force needed to accelerate a one kilogram mass at a rate of one meter per second per second or one meter per second squared.
Measuring force -continued
• Thus, one newton equals one kilogram -meter per second squared, or
• 1N = 1 kg * m / s2
• 1N = 0.22 lb• 1kg weighs 9.8 N or 2.2 lb• 1 slug weighs 32.2 lb• 1 slug = 14.59 kg• 1 lb = 4.45 N
Measuring force - continued
• Spring scales are used to measure force• Since weight is a force that is proportional
to mass, springs scales can also be used to measure mass. However, weight and mass are not the same thing. Weight is the force of gravity acting on a mass. Mass is a measure of an object’s inertia.
• In the SI system, the acceleration due to gravity is 9.8 m/s2.
Vectors
• Quantities that have both a magnitude (a number) and a direction are vector quantities. Ex – force, displacement, velocity, acceleration, momentum.
• Quantities that have only a magnitude are scalar quantities. Ex – temperature, mass, pressure, time.
Drawing Vectors
• Vectors are represented by arrows• The length of the arrow represents the
magnitude• The arrowhead indicates the direction
Adding non-colinear vectors mathematically
• By the Pythagorean Theorem c2 = a2 + b2
• Thus c = (a2 + b2)1/2
• This method can be used if the vectors are at right angles to one another
• If they are not at right angles, they can be added graphically
Newton’s 1st Law of Motion• An object at rest will remain at rest, or if
traveling at a velocity will continue at that velocity in a straight line unless a net force acts on it.
• In other words, if you don’t push it, it won’t move. It will just sit there and laugh at you. If it’s moving it won’t speed up, slow down, or change direction. And it’s still laughing.
Balanced & Unbalanced Forces
• If the forces on an object are balanced, there is no net force
• If the forces are unbalanced, there is a net force
Torque
• Torque is the product of a force applied to a lever arm.
• = FL (force x lever arm)
• , the Greek letter tau, is used for torque
• SI units would be N*m
• English units = ft*lb or in*lb
• Torque can be applied in a clockwise (cw) or counter clockwise (ccw) direction.
Torque example problem
• A 30 lb force is applied to end of an 18 inch wrench as shown
• What is the torque applied to the nut in ft-lb?
Solution
• Torque = force times lever arm ( = FL)
• 18in = 1.5 ft
• = FL = 30lb x 1.5ft
• = 45 ft-lb
Torque Example Problem
• Two gears are in contact• The larger gear is 10
inches in diameter• The smaller gear is 2
inches in diameter• A torque of 5 in-lb is
applied to the smaller gear
• What is the torque on the larger gear?
Solution
• For the smaller gear, we know the torque ( 5 in-lb) and the lever arm ( 1 in ). The lever arm is the radius or ½ the diameter.
• Thus we can find the force
• = FL, thus F = /L = 5 in-lb / 1 in = 5lb
• The force on both gears must be the same, therefore for the larger gear:
• = FL = 5lb x 5 in = 25 in-lb
Summary
• A force is a push or a pull.
• Force is a vector. It has magnitude and direction. Its magnitude is measured in pounds (English) or Newtons (metric).
• Newton’s 1st Law – No net force equals no acceleration.
• A net force is the result of unbalanced forces.