Upload
quentin-holt
View
215
Download
1
Tags:
Embed Size (px)
Citation preview
Calculate the work required to push a
500.0 kg box 250 m at a constant velocity. = 0.20 between the
box & the floor.
Calculate the work done when mowing the lawn when a boy applied a 50.0 N force at a 37o
from horizontal for 2.0 km.
Calculate the work done when a girl pulls a 4.0 kg box with a rope at a 37o from horizontal for
2.0 m. = 2.5
A 10.0 Gg crate is accelerated by a cable
up a 37o incline for 50.0 m in 2.5 hrs. = 0.20Calculate: FT, W, & P
A 50.0 g box is accelerated up a 53o
incline for 50.0 m at 250 cm/s2. = 0.20
Calculate: FA, vf,W, P, K, & U at the top of the ramp
Machines• Devices used to ease force
one has to apply to move an object by changing the magnitude and direction of the force.
In an Ideal Situation•100 % of the work input into a system would be transferred to output work, thus:
A 100.0 Mg trolley is pulled at 750 cm/s up a 53o
inclined railway for 5.0 km. = 0.20
Calculate: FA,W, P, K, & U at the top of the ramp
An alien exerts 250 N on one end of a 18 m
lever with the fulcrum 3 m from a 1200 N load.
Calculate: IMA, MA, & efficiency
A 350 N force is applied to push a 50.0
kg box up a 20.0 m ramp at 37o from
horizontal. Calculate: IMA, MA, & efficiency
A pulley with an efficiency of 80.0 %
with 5 interconnecting ropes lifts a 100.0 kg
load. Calculate:IMA, MA, & FA
A 1.0 m handle is connected to 5.0 cm wheel. The
efficiency of this system is 90.0 %. Calculate IMA, MA, & the force required to pull a
500 kg object connected to the wheel.
A 100.0 cm handle is connected to 5.0 cm wheel with teeth
connecting it to another 50.0 cm wheel connected to a 2.5 cm axle. A cable is connected to the axle. The efficiency of this system is 90.0 %. Calculate IMA & MA
A sledge hammer is used to apply 25 kN drive a 2.0 cm x 10.0 cm wedge into
a board. Calculate the force on the board if the
efficiency is 75 %.
Design a system of simple machines that
can lift at least 100,000 times the force applied by a human. Assume 90
% efficiency.
The front sprockets on a 21 speed bike are 24 cm, 18 cm,
& 15 cm in diameter. The back sprockets range from 12 cm to 4.0 cm. Determine the
ratio of highest to lowest gears.
On the same bike, the wheels are 80.0 cm in diameter.
Calculate the speed in the lowest & highest gears if a
person can pedal at 1.0 revolution per second.
A 100.0 kg block ( = .20) slides from rest down a 50.0 m ramp at 37o from horizontal. At the bottom
of the ramp, it collides with a 25 kg box ( = .25) &
stops. Calculate:
r = 5.0 cm
10.0 m
2.0 m
1.0 Mg
The 1.0 m crank is turned lifting the box to a height of 50.0 cm in 5.0 minutes with an efficiency of 90 %. Calculate: IMA, MA, di, FA, Wo, Wi, & P.
A 50.0 Mg elevator is raised 200.0 m in
3.0 minutes at a constant speed.
Calculate: FAupward, W, & P