Upload
jewel-keeling
View
219
Download
2
Tags:
Embed Size (px)
Citation preview
Chapter 18
Methodology – Monitoring and Tuning the Operational System
Transparencies
© Pearson Education Limited 1995, 2005
2
Chapter 18 - Objectives
Meaning of denormalization.
When to denormalize to improve performance.
Importance of monitoring and tuning the
operational system.
How to measure efficiency.
How system resources affect performance.
© Pearson Education Limited 1995, 2005
3
Step 7 Consider the Introduction of Controlled Redundancy
To determine whether introducing redundancy in a controlled manner by relaxing normalization rules will improve the performance of the system.
© Pearson Education Limited 1995, 2005
4
Step 7 Consider the Introduction of Controlled Redundancy
Result of normalization is a design that is structurally consistent with minimal redundancy.
However, sometimes a normalized database does not provide maximum processing efficiency.
May be necessary to accept loss of some benefits of a fully normalized design in favor of performance.
© Pearson Education Limited 1995, 2005
5
Step 7 Consider the Introduction of Controlled Redundancy
Also consider that denormalization:– makes implementation more complex;– often sacrifices flexibility;– may speed up retrievals but it slows down
updates.
© Pearson Education Limited 1995, 2005
6
Step 7 Consider the Introduction of Controlled Redundancy
Denormalization refers to a refinement to relational schema such that the degree of normalization for a modified relation is less than the degree of at least one of the original relations.
Also use term more loosely to refer to situations where two relations are combined into one new relation, which is still normalized but contains more nulls than original relations.
© Pearson Education Limited 1995, 2005
7
Step 7 Consider the Introduction of Controlled Redundancy
Consider denormalization in following situations, specifically to speed up frequent or critical transactions:
– Step 7.1 Combining 1:1 relationships– Step 7.2 Duplicating non-key attributes in
1:* relationships to reduce joins– Step 7.3 Duplicating foreign key attributes
in 1:* relationships to reduce joins
© Pearson Education Limited 1995, 2005
8
Step 7 Consider the Introduction of Controlled Redundancy
– Step 7.4 Duplicating attributes in *:* relationships to reduce joins
– Step 7.5 Introducing repeating groups– Step 7.6 Creating extract tables– Step 7.7 Partitioning relations.
© Pearson Education Limited 1995, 2005
9
Sample Relation Diagram
© Pearson Education Limited 1995, 2005
10
Sample Relations
© Pearson Education Limited 1995, 2005
11
Step 7.1 Combining 1:1 relationships
© Pearson Education Limited 1995, 2005
12
Step 7.2 Duplicating non-key attributes in 1:* relationships to reduce joins
© Pearson Education Limited 1995, 2005
13
Step 7.2 Duplicating non-key attributes in 1:* relationships: Lookup Table
© Pearson Education Limited 1995, 2005
14
Step 7.2 Duplicating non-key attributes in 1:* relationships: Lookup Table
© Pearson Education Limited 1995, 2005
15
Step 7.3 Duplicating FK attributes in 1:* relationship to reduce joins
© Pearson Education Limited 1995, 2005
16
Step 7.4 Duplicating attributes in *:* relationships to reduce joins
© Pearson Education Limited 1995, 2005
17
Step 7.5 Introducing repeating groups
© Pearson Education Limited 1995, 2005
18
Step 7.6 Creating extract tables
Reports can access derived data and perform multi-relation joins on same set of base relations. However, data the report is based on may be relatively static or may not have to be current.
Possible to create a single, highly denormalized extract table based on relations required by reports, and allow users to access extract table directly instead of base relations.
© Pearson Education Limited 1995, 2005
19
Step 7.7 Partitioning relations
Rather than combining relations together, alternative approach is to decompose them into a number of smaller and more mannageable partitions.
Two main types of partitioning: horizontal and vertical.
© Pearson Education Limited 1995, 2005
20
Step 7.7 Partitioning relations
© Pearson Education Limited 1995, 2005
21
Advantages and disadvantages of denormalization
© Pearson Education Limited 1995, 2005
22
Step 8 Monitor & Tune Operational System
To monitor operational system and improve performance of system to correct inappropriate design decisions or reflect changing requirements.
© Pearson Education Limited 1995, 2005
23
Step 8 Monitor & Tune Operational System
Number of factors may be used to measure efficiency:
- Transaction throughput: number of transactions processed in given time interval.
- Response time: elapsed time for completion of a single transaction.
- Disk storage: amount of disk space required to store database files.
No one factor is always correct. Have to trade each off against another to achieve reasonable balance.
Need to understand how the various hardware components interact and affect database performance.
© Pearson Education Limited 1995, 2005
24
Step 8 Monitor & Tune Operational System
DreamHome wish to hold pictures of properties, and comments that describe main features of property.
© Pearson Education Limited 1995, 2005