Upload
tabitha-baldwin
View
226
Download
4
Embed Size (px)
Citation preview
Open System: freely exchanges matter and energyClosed System: exchanges energy but not matterIsolated System: does not interact with surroundings
4
Energy
The ability to do work or transfer heat.–Work: Energy used to cause an object
that has mass to move.–Heat: Energy used to cause the
temperature of an object to rise.
5
Work
• Energy used to move an object over some distance.
• w = F d,where w is work, F is the force, and d is the distance over which the force is exerted.
6
Kinetic EnergyEnergy an object possesses by virtue of its motion.
12
KE = mv2 Kinetic energy increases as the speed and mass of
an object increases.
7
Potential EnergyEnergy an object possesses by virtue of its position or chemical composition.
PE= m x g x h m=mass=kgg=gravitational constant=9.8m/s2
h= height (or distance)
7.2 HeatEnergy transferred between a system and its surroundings as a result of temperature difference
Heat flows from a warm body to a cooler body.
The quantity of heat, q, required to change a substances temperature is dependent on:– Temperature change– Quantity of substance– Nature of substance
calorie: heat to change 1 g of water 1°C1 cal = 4.184 J
Specific Heat Capacity: heat to change 1 g of a substance 1°C
Example 1A
How much heat in kJ is required to raise the temperature of 237 g of water from 4.0°C to 37.0°C?
Example 2A
• When 1.00 kg of lead (c = 0.13J/g°C) at 100.0°C is added to a quantity of water and the final temperature of the lead/water is 32.5°C. What is the mass of water present?
7.3 Calorimetry
Chemical Energy: the energy associated with chemical bonds and intermolecular forcesChemical Reaction: breaking and forming bondsHeat of Reaction: heat exchange during a chemical reaction
15
Exchange of Heat
• When heat is absorbed by the system from the surroundings, the process is endothermic.
16
Exchange of Heat
• When heat is absorbed by the system from the surroundings, the process is endothermic.
• When heat is released by the system to the surroundings, the process is exothermic.
17
Bomb Calorimetry
Reactions can be carried out in a sealed “bomb” and measure the heat absorbed by the water.
Example 3A
• Vanillin in a natural constituent of vanilla. It is also manufactured for use in artificial vanilla flavor. The combustion of 1.013 g of vanillin, C8H8O3, in a bomb calorimeter causes the temperature to raise from 28.89°C to 30.09°C. What is the heat of combustion of vanillin in kJ/mol?
19
Constant Pressure Calorimetry
By carrying out a reaction in aqueous solution in a simple calorimeter such as this one, one can indirectly measure the heat change for the system by measuring the heat change for the water in the calorimeter.
Example 4A
Two solutions, 100.0 mL of 1.00M AgNO3(aq) and 100.0 mL of 1.00M NaCl (aq), both initially at 22.4°C are added to a Styrofoam cup allowed to react. The temperature rises to 30.2°C. Determine the qrxn per mole of AgCl(s) in the reaction
Ag+(aq) + Cl-
(aq) AgCl(s)
21
7.4 WorkWe can measure the work done by the gas if the reaction is done in a vessel that has been fitted with a piston.
w = −PV
Example 5A
How much work, in Joules, is involved when 0.255 mol N2 at constant temperature of 23°C is allowed to expand by 1.50L in volume against an external pressure of 0.750 atm?
23
7.5 First Law of Thermodynamics• Energy is neither created nor destroyed.• In other words, the total energy of the universe is a constant; if the system
loses energy, it must be gained by the surroundings, and vice versa.
qsystem = -qsurroundings
U = q + w
24
E, q, w, and Their Signs
q + (system gains heat) - (system loses heat)
w + (work done on system)
- ( work done by system)
U + (net gain of energy by system)
- ( net loss of energy by system)
Example 6A
In compressing a gas, 355J of work is done on the system. At the same time 185 J of heat escapes from the system. What is the U for the system?
26
7.6 Enthalpies of Reaction
This quantity, H, is called the enthalpy of reaction, or the heat of reaction.
Example 7
How much heat is associated with the complete combustion of 1.00kg of sucrose?ΔH = -5.65 x 103 kj/mol
Example 8A
What is the enthalpy change when a cube of ice 2.00 cm on edge is brought from -10.0°C to a final temperature of 23.2°C? For ice, use d = 0.917 g/mL, a specific heat of 2.01 J/g°C and enthalpy of fusion of 6.01kJ/mol.
7.7 Hess’s Law
Change in enthalpy is the same if the reaction took one step or many steps•If you can add balanced equations, you can add ΔH •If you alter the equation, alter ΔH – Double reactant/products, double ΔH – Reverse equation, change sign of ΔH – Cancel items if they are in reactants and products
7.8 Heat of Formation
ΔHf°: enthaply of formation
•Defined as heat change that results when one mole of compound is formed from its constituent elements•Pure element ΔHf°= 0
Example 10A
The standard enthalpy of formation for the amino acid leucine is -637.3 kJ/mol C6H13O2N (s). Write the chemical equation to which this value applies.
Example 11A
Use data table 7-2 to calculate the enthalpy for the combustion of ethanol, CH3CH2OH (l), at 298.15K.
Example 13A
Given that Hf°[AgI(s)] = -61.84 kJ/mol, what is the standard enthanpy change for the precipitation of silver iodide?
39
Calculation of H
• Imagine this as occurringin 3 steps:
C3H8 (g) + 5 O2 (g) 3 CO2 (g) + 4 H2O (l)
C3H8 (g) 3 C(graphite) + 4 H2 (g)
3 C(graphite) + 3 O2 (g) 3 CO2 (g)
4 H2 (g) + 2 O2 (g) 4 H2O (l)
40
Calculation of H
• Imagine this as occurringin 3 steps:
C3H8 (g) + 5 O2 (g) 3 CO2 (g) + 4 H2O (l)
C3H8 (g) 3 C(graphite) + 4 H2 (g)
3 C(graphite) + 3 O2 (g) 3 CO2 (g)
4 H2 (g) + 2 O2 (g) 4 H2O (l)
41
Calculation of H
• Imagine this as occurringin 3 steps:
C3H8 (g) + 5 O2 (g) 3 CO2 (g) + 4 H2O (l)
C3H8 (g) 3 C(graphite) + 4 H2 (g)
3 C(graphite) + 3 O2 (g) 3 CO2 (g)
4 H2 (g) + 2 O2 (g) 4 H2O (l)
42
C3H8 (g) + 5 O2 (g) 3 CO2 (g) + 4 H2O (l)
C3H8 (g) 3 C(graphite) + 4 H2 (g)
3 C(graphite) + 3 O2 (g) 3 CO2 (g)
4 H2 (g) + 2 O2 (g) 4 H2O (l)
C3H8 (g) + 5 O2 (g) 3 CO2 (g) + 4 H2O (l)
Calculation of H
• The sum of these equations is:
43
Calculation of H
We can use Hess’s law in this way:
H = nHf(products) - mHf(reactants)
where n and m are the stoichiometric coefficients.