CHAROTAR UNIVERSITY OF SCIENCE AND …charusat.ac.in/Download/bpharm_1sem_syllabus.pdf · 1 Introduction and future scope of Pharmacognosy: Definition and Historical background, present

CHAROTAR UNIVERSITY

OF SCIENCE AND TECHNOLOGY

FACULTY OF PHARMACY

Syllabus for 1st Semester B. Pharm. Programme

B. Pharm. Semester – I Syllabus CHARUSAT

FACULTY OF PHARMACY 2

Human Anatomy & Physiology - I (PH 101)

(Theory)

Credits: 3 Contact Hours per week: 3

Objective of the Course:

To make students familiar with the principles of human anatomy and physiology as well as basic

concepts related to health.

Student Learning Outcomes/Objectives:

At the end of the course, the student will be able to understand the concept of anatomy and

physiology of different organ systems which is a prerequisite for understanding the concepts of

pharmacology. In addition they will be able to know about different diseases and their

causative organism.

Instructional Methods and Pedagogy:

Faculty member/s shall explain in a class room using black board and multimedia projector,

charts and models of different organ systems.

Course Outline:

No. Unit Minimum No.

of Contact Hours

Approx.

Weightage %

1 Introduction to Anatomy & Physiology 2 3 %

2 The Cell 4 10 %

3 Tissues 3 10 %

4 Muscular system 3 15 %

5 Sense organs 6 10 %

6 Nervous system 11 20 %



7 Reproductive system 3 10 %

8 Endocrine system 8 10 %

9 Osseous system 3 5 %

10 Introduction to microbes 1 5 %

11 The concept of Epidaemiology 1 2 %

Total 45 100 %

Detailed Syllabus:

No. Unit Details Contact

hours

1 Introduction to Anatomy & Physiology:

- Fundamental & Scope of Anatomy & Physiology.

- Anatomical terms in relation to parts of the body system & organs.

2

2 The Cell:

- Molecular structure & function of cell.

- Mechanism & electrophysiology of cell membrane including various

transport mechanisms.

- Cell cycle (Genetic control of cell function & its significance).

4

3 Tissues:

- Introduction & organization to elements of tissue.

- Functions of different tissues( Epithelial, Connective, Muscular &

Nervous tissue).

3

4 Muscular system:

- Their gross & molecular level anatomy and physiology of skeletal muscle.

- Physiology of muscle contraction.

- Physiological properties of skeletal muscles and their disorders.

3

5 Sense organs:

- Basic anatomy and physiology of eye (vision), ear (hearing), taste buds,

nose (smell).

- Structure & function of skin (superficial receptors).

- Regulation of body temperature.

6




hours

6 Nervous system:

- Neurons & Nerve fibers: Physiology of nerve excitation &

conduction. (Sensory & motor nerves).

- Central nervous system: Specialized function of different

parts of brain and spinal cord, Neurohumoral transmission in the

CNS, Reflex action, RAS, Limbic System.

- Electroencephalogram, Physiology of sleep, CSF.

- Autonomic nervous system: Physiology and function of

ANS, Mechanism& significance of the neurohumoral transmission

in the ANS.

- Peripheral Nervous System (PNS):Description & function of

Cranial & Spinal nerves.

- Demonstration of reflex action.

11

7 Reproductive system:

- Male and female reproductive system and their hormones.

- Physiology of menstruation, coitus and fertilization. Sex differentiation,

spermatogenesis and cogenesis. Pregnancy its maintenance and

parturition.

3

8 a) Endocrine system (Hormones):

Basic anatomy and physiology of pituitary, thyroid, parathyroid,

adrenals, pancreas, testis and ovary, their hormones and function. Brief

outline of their disorders.

b) Autocoids (Local hormones):

Histamine, 5-HT, prostaglandin, Thromboxanes, Leukotrienes PAF and

peptides, their function and importance.

8

9 Osseous system:

Structure, composition and function of skeleton, classification of joints,

Types of movements at joints, disorder of bones and joint.

3




hours

10 Introduction to microbes:

Classification of microbes, isolation, staining techniques of organisms of

common diseases.

1

11 Epidaemiology:

- Its scope, methods, uses and dynamics of disease transmission.

(Endemic, Epidemic, Pandemic).

- Immunity and immunization: Immunological products and their dose

schedule.

- Principles of disease control and prevention, hospital acquired infection,

prevention and control.

- Disinfection, types of disinfection, disinfection, procedures, for faeces,

urine, sputum, room linen, dead-bodies, instruments.

1

Recommended study materials:

1. Fundamentals of anatomy and physiology; Martini F; Prentice hall; 2nd Ed. 1992.

2. Anatomy and physiology; Seeley R. R., Stephens T. D. and Tate P., Mosby, St Louis; 3rd

Ed. 1995.

3. Text book of medical physiology; Guyton; W. B. Saunders Co.; Philadelphia; 8th Ed.;

1991.

4. West J. B. Best and Taylor’s physiological basis of medical practice; Williams and Wilkins,

Baltimone; 12th Ed.1989.

5. Principles of anatomy and physiology; Tortora G. J. and Anagnodokos, N. P.; Harper and

Colling Publishers, New York; 7th Ed. 1992.

6. Human anatomy, physiology and health education; Gandhi T. P.; B. S. Shah Prakashan,

Ahmedabad; 9th Ed. 1998.

7. Preparatory Manual for undergraduates’ physiology; Joshi V. D.; B. I. Churchill

Livingstone; 1995.



8. Human physiology; Chatteerjee C.C.; Medical Allied Agency Calcutta; 10th Ed.1985.

9. Physiology and anatomy; Clancy, John and MoVicet A.J.; Edward Arnold; 1995.

10. Human Physiology; Shalya S.; C. B. S. Publishers New Delhi; 1st Ed. 1994.

11. Human Anatomy; Chaurasia B.O.; C. B. S. Publishers New Delhi; 3rd Ed. 1994.

12. Anatomy and physiology in health and illness; Ross and Wilson’s; Churchill Livingstone;

8th Ed. 1995.

13. Health Education and Community Pharmacy; Parmar N. S.; C. B. S. Publishers, New

Delhi; 1995.

14. Practical anatomy Physiology and biochemistry; Goyal R. K.; B. S. Shah Prakashan,

Ahmedabad; 1994.

15. A textbook of history; Garg K. et. al; C. B. S Publishers, New Delhi; 2nd Ed.1991.

16. Text books of histology; Lesson C. R. et. al.; W. B. Saunders Co.5th Ed.

17. Atlas of anatomy; Aqur, Anne M.R.; Williams and Wilkins; 9th Ed.1991.

18. A photographic atlas for the anatomy and physiology lab.; Van de Graaff and Crewley, J.

L.; Mortan Publishing Co.; 3rd Ed. 1991.

19. A text book of practical physiology; Ghai C. L.; Jaypee Brothers Medical Publishers (P)

Ltd.; 4th Ed. 1998. (Practical)



Basic Pharmacognosy – I (PH 102)

(Theory & Practical)

Credits: 3 (Theory) Contact Hours per week: 3 (Theory)

: 1.5 (Practical) : 3 (Practical)


To make students familiar with the concept of Pharmacognosy, the scientific studies of the

natural products utilized as drugs.

Student Learning Outcomes / Objectives:

At the end of the course, the student should understand the preliminary basis of

Pharmacognosy.

The students are expected to

understand different methods to cultivate the medicinal plants

differentiate between different types of the organs of medicinal plants

understand various options available- in vivo and in vitro to improve the quality of the

phytoconstituents obtained from the natural sources.

Instructional Methods and Pedagogy:

The faculty shall explain the lectures

using black board,

using Over Head Projector, Multimedia projector.

through visit of herbal garden

Course Outline (Theory):

No. Unit Minimum No. of

Contact Hours

Approx.

weightage %



1 Introduction and future scope of Pharmacognosy. 5 10 %

2 Sources of drugs. 7 10 %

3 Classification of drugs. 6 15 %

4 Cultivation, collection, processing and storage of crude

drugs.

10 20 %

5 Introduction to Plant Cell and tissues. 5 10 %

6 Morphology and histology of different plant parts. 12 35 %

Total 45 100 %

Detailed Syllabus (Theory):

No. Unit details Contact

Hours

1 Introduction and future scope of Pharmacognosy:

Definition and Historical background, present status,

development and future scope of Pharmacognosy.

5

2 Sources of drugs:

Plant source, Biological source, Marine and minerals. Tissue

culture technique – as a source of drugs.

7

3 Classification of drugs:

Alphabetical, Morphological, Taxonomical, Chemical,

pharmacological and Chemo taxonomical classification.

6

4 Cultivation, collection, Processing and storage of crude drugs:

Factors influencing cultivation of medicinal plants. Types of soils

and fertilizers of common use. Plant hormones and their

application. Introduction and application of Polyploidy, Mutation

and Hybridization with reference to medicinal plants.

10

5 Introduction to Plant Cell and tissues:

Plant cell Structure and non-living inclusion Different types of

plant tissues and their function.

5



Course Outline (Practical):

1 Care, use and types of microscope.

2 Morphology of plant parts indicated in theory.

3 Preparation, microscopic examination of stem, root and leaf of monocot and dicot

plants.

Detailed Syllabus (Practical):

No. Aim of the Practical

1 Introduction and functioning of microscopes.

2 Histological examination of Monocot Leaf*.

3 Histological examination of Dicot Leaf*.

4 Histological examination of Monocot Root*.

5 Histological examination of Dicot Root*.

6 Histological examination of Monocot Stem*.

7 Histological examination of Dicot Stem*.

8 Morphological studies of Flowers and inflorescences.

9 Morphological studies of Fruit.

10 Morphological studies of aerial and underground parts of the plants.

11 Studies on modifications of stem and root.

12 Studies of different types of plant tissues. (Parenchyma, Sclerenchyma, Collenchyma, Vascular

Tissues, Special Tissues)

6 Morphology and histology of different plant parts: Morphology

and histology of root, stem, leaf. Morphology of bark, wood,

flower, fruit and seed. Modification of root and stem.

12




a) Text books:

1. Pharmacognosy; C. K. Kokate, A. P. Purohit, S. B. Gokhale; Nirali prakashan, Pune; 39th

Edition; 2007.

2. Botany for degree students; A. C. Dutta; Calcutta Oxford university press, New Delhi; 15

impressions; 1994.

3. A textbook of Pharmacognosy; Mamta Shah, Urvashi Shah, Sangita Marfatia; Nirav and

Roopal Prakashan; 2008-09.

4. Textbook of Pharmacognosy I; S. B. Dhake, Parul B. Patel; Nirav and Roopal Prakashan;

2008-09.

5. Pharmacognosy; J. S. Quadry; B. S. Shah Prakashan, Ahemedabad; 14th edition; 2008-09.

b) Reference books:

6. Pharmacognosy; V. E. Tylar, L. R. Brady, J. E. Habbers; Lea and Febgir Philadelphia; 8th

edition; 1981.

7. Pharmacognosy of powdered crude drugs; M. A. Tyenger; Manipal power press; 1st

Edition; 1974.

8. Trease and Evan’s Pharmacognosy; W. C. Evans; W. B. Saunders Co., Singapore; 15th

Edition; 2008.

9. Text Book Pharmacognosy; T.E. Wallis; CBS Publishers and Distributors, Delhi; 5th

Edition; Reprint-2005.



Pharmaceutical Chemistry - I (Inorganic) (PH 103)




Objective of the course:

The course is designed to make students familiar with the principles of inorganic

chemistry as applied to pharmaceuticals and to study inorganic agents used as

pharmaceutical aids, therapeutic agents and diagnostic agents.

Students learning outcomes/objectives:

The course will help the student to have a good understanding of the history and basic

concepts of medicinal inorganic chemistry.

Students should be able to describe in detail synthetic approaches as well as

mechanisms of action of some important metal-based therapeutic and diagnostic

agents.

The course may help the students in understanding rational approaches towards the

design of important therapeutic agents and their biological implications.

Instructional methods and pedagogy:

The faculty shall explain the lectures using black board, Over Head Projector or

Multimedia projector.



Contact hours.

Approx.

Weightage %

1 Pharmacopoeia and monograph 04 15 %

2 Sources of contamination in pharmaceuticals and

methods to control

04 10 %

3 An outline of methods of preparation uses, sources, 31 65 %



impurities, tests for purity and identity, including various

limit tests, and special tests, if any for the classes of

inorganic pharmaceuticals included in the current edition

of the Indian Pharmacopoeia.

4 Water 03 5 %

5 Important inorganic gases used in pharmacy 03 5 %

Total 45 100 %

Detailed syllabus (Theory):


Hours

1 Pharmacopoeia and monograph

Different pharmacopoeia and contents of official monograph.

04

2 Sources of contamination in pharmaceuticals and methods to control

- Purity of Pharmaceuticals and factors affecting purity of

pharmaceuticals

- Limit test for chlorides, sulphates, arsenic, iron, lead, heavy metals

as per I.P.

04

3 An outline of methods of preparation uses, sources, impurities,

tests for purity and identity, including various limit tests, and

special tests, if any of the following classes of inorganic

pharmaceuticals included in the current edition of the Indian

Pharmacopoeia.

- Dental products

Dentifrices, anti- caries agents.

03

- Antidotes

Classification, Sodium thiosulphate, Sodium nitrite.

02

- Gastrointestinal tract agents

A) Acidifying agents-dil HCl

06



B) Antacids-Sodium bicarbonate, aluminum hydroxide, Aluminum

phosphate, Basic aluminum carbonate, Calcium Phosphate,

Magnesium carbonate, Milk of magnesia.

C) Protectives and adsorbents-Bismuth compounds, bismuth sub

carbonate, Bismuth subgallate, Bismuth sodium tartarate, Kaolin,

Activated charcoal, pectin.

D) Saline cathartics-Sodium phosphate, Sodium potassium tartarate,

Magnesium carbonate, magnesium oxide.

- Essential and trace ions

Absorption, distribution, physiological role. Official compound of Fe,

Cu, Zn, Mn, I., Ferrous sulfate, Iron sorbite injection, Ferric

ammonium citrate, ferric chloride, Copper sulfate, Iodine, Potassium

iodide, Sodium iodide, Zinc sulphate.

07

- Expectorants and emetics

Ammonium chloride, Potassium iodide, Antimony Potassium

tartarate. Mode of action of all compounds.

02

- Topical agents

General introduction and mode of action:

A) Protectives- Talc, zinc oxide, Calamine, Zinc stearate, Titanium

dioxide, aluminium compounds.

B) Antimicrobials and astringents: Hydrogen peroxide solution,

Sodium perborate, zinc peroxide, Potassium permanganate, Sodium

hydrochloride, Iodine solution and nitrate, Mercuric oxide, Mercuric

chloride and sulphate, Boric acid, Selenium sulfide, Zinc sulfate.

08

- Complexing and chelating agents

Complexing and chelating agents used in therapy.

03

4 Water

Hardness of water, methods to remove hardness of water, different

official waters and official quality control tests for waters.

03



5 Important inorganic gases used in pharmacy

Oxygen, Nitrogen, Nitrous Oxide, carbon dioxide, Helium, Ammonia

and their compounds as per I.P.

03

Note: For official compounds, general properties assays storage and uses should be

discussed.

Course Outline (Practical):

No. Practicals

1 Semi-micro inorganic qualitative analysis of mixtures containing two acidic and two

basic radicals (Minimum 06 mixtures).

2 Limit tests

3 Assay of compounds belonging to different categories as per pharmacopoeia. (Minimum

03)

Detailed syllabus (Practical):

No. Aim of Practical

1 Semi-micro inorganic qualitative analysis of Given Inorganic mixtures (Minimum 07) PbNO3 + KCl MgSO4+K2CO3 MgCl2+KNO3 FeSO4+ZnCl2 K2CrO4+AgCl2 KI+FeCl3 ZnSO4+CaCO3 CdCl2+KBr KNO3+MgSO4 (NH4)2NO3+MgCl2 BaSO4+HgCl2 MnSO4+KCl AlCl3+PbCl2

2 Limit test( Minimum 04) Limit test for Chlorides Limit test for sulfate



Limit test for Iron Limit test for Lead Limit test for Arsenic

3 Assay of following compounds as per pharmacopoeia. (Minimum 04) Assay of Boric acid Assay of CuSO4 Assay of FeSO4 Assay of Calcium lactate Assay of Calcium gluconate

Recommended study material:

1. Indian Pharmacopoeia; Government of India; 2007.

2. Medicinal and Pharmaceutical Chemistry Inorganic; J. H. Block, E. B. Roche; Varghese

Publication; Indian edition.

3. Text Book of Pharmaceutical Chemistry Revised by L. M. Atherden, Bentley & Driver’s;

Oxford Medical Publications, 8th edition.

4. The Science and Practice of Pharmacy by Remington, Lipincott, William and Wilkins;

20th edition.

5. Advanced Inorganic Chemistry; Cotton & Wilkinson; Wiley Eastern Ltd., Delhi, 18th

Edition.

6. Inorganic Pharmaceutical Chemistry (Practical), Dhake & Belsare; 2nd Edition.

7. Text Book of Quantitative Chemical Analysis; Vogel’s; ELBS UK, 5th Edition, 1996.

8. Quantitative Inorganic Analysis; Vogel’s; ELBS UK, 5th Edition, 1996.

9. Practical Pharmaceutical Chemistry Vol. I & II; A.H. Beckett & J.B. Stenlake, CBS.

Publishers; New Delhi, 4th Edition, 1986.

10. Inorganic Pharmaceutical Chemistry; T. O. Spine and C. O. Wilson, Roger’s, Lea &

Febiger, Philadelphia, USA, 8th edition, 1967.

11. Pharmaceutical Chemistry-Inorganic; G. R. Chatwal; Goel Publishing House.

Pharmaceutical Engineering – I (PH 104)






Objective of the course:

To study basic mechanism of material transportation, this is used in pharmaceutical

industries.

Subject gives the guideline for handling of liquid, solid and gaseous material in various

places in pharmacy.

Students learning outcomes/objectives:

By the end of this course, the student should have a good understanding of the basic

concepts of material handing in various field of pharmacy.

Students should be able to know the appropriate instrumental requirement for

measurement of various flow of fluid and shifting of solid material.

Instructional methods and pedagogy:

The lectures will be delivered using

Black board

Over Head Projector or Multimedia projector


No. Unit Minimum No.

of contact hours

Approx.

Weightage %

1 Flow fluids 08 18 %

2 Stoichiometry 08 18 %

3 Heat transfer 08 18 %

4 Mass Transfer 05 11 %



5 Material handling systems 06 13 %

6 Materials of Pharmaceutical Plant Construction 06 13 %

7 Packaging of Materials 04 09 %

Total 45 100 %

Detailed syllabus (Theory):


Hours

1. Flow fluids:

Type of flow, Reynolds number and its significance, concept of

boundary layer, basic equiation of fluid flow, valve, flow meters,

measurement of flow and pressure.

8

2 Stoichiometry:

Unit processes, material and energy balance, molecular unit, mol

fraction, tie substance, gas law, mole volume, equilibrium state,

rate process, steady and unsteady state, dimensionless equiation

and formulas, different types of graphic representation,

application of gas law, mathematical problems.

8

3 Heat transfer:

Modes of heat transfer. Conduction- Fourier’s law, resistances in

series and parallel, use of mean area and mean temperature

difference. Convection-Concept of film, overall coefficient, heat

transfer by forced convection in laminar and turbulent flow,

condensing vapours, evaluation of individual film coefficients.

Radiation-Black body, absorptivity & emmisivity. Heating of fluids,

steam as heating medium, properties and uses of steam, steam

traps, study of steam table. Heat exchange equipments-Heat

exchangers, condensers, boilers, extended surface scraped and

surface equipments etc. Applications of heat transfer in industrial

8



processes. Mathematical problems.

4 Mass Transfer:

Principle, streams in mass-transfer operations, solid/fluid and

fluid/fluid mass transfer, influence of mass transfer on unit

operations.

5

5 Material handling systems:

Solids handling- storage, conveyers, vacuum & pneumatic

conveying. Liquid handling- storage, pumps. Gases- Fans, blowers

and compressors. Colour coding of Pipelines, use of forklifts and

pallets, store design in pharmaceutical industries.

6

6 Materials of Pharmaceutical Plant Construction:

General study of composition, corrosion resistance, properties,

factors affecting the selection of material of pharmaceutical plant

construction with special reference to stainless steel and glass.

Corrosion-types, causes, theories of corrosion and its prevention.

6

7 Packaging of Materials:-

Function and qualities of package, type of packaging materials,

merits and demerits of packaging materials, pressure pack of

pharmaceutical product.

4

Detailed syllabus (Practical):

No. Aim of Practical

1 To study conversion factors and use of these conversion factors.

2 To calibrate the given Ventrurimeter and to find out the co efficient of discharge.

3 To calibrate the given Orificemeter and to find out the co efficient of discharge.

4 To calibrate the given Rotameter with plummet.

5 Measurement of flow of fluids and their pressure and calculate the Reynolds number.

6 To determine the vacuum creating efficiency of ejector pump.

7 To determine the volume transfer efficiency of ejector pump.



8 To measure the velocity head of the fluid using pitot tube.

9 To measure the pressure of gas passing through the pipeline by difference type of U tube

manometer.

10 To determine the overall heat transfer coefficient of a given heat exchanger.

11 To determine the efficiency of given lagging material.

Recommended study material:

1. Elementary Chemical Engineering; Max S. Peters; McGraw Hill Book Company, New

York; 1954.

2. Perry’s Chemical Engineer’s Handbook; Robert H Perry, Green D.W., Maloney J.O.;

McGraw Hill Inc., New York; 7th Edition, 1998.

3. Copper and Gun’s Tutorial Pharmacy; S. J. Carter; CBS Publication & Distribution, New

Delhi; 2004.

4. Unit Operations of Chemical Engineering; McCabe Warren, Smith & Harriott; McGraw

Hill Inc., New York; 5th edition; 2001.

5. Pharmaceutical Engineering; K. Sambamurthy; New Age International Ltd., New Delhi

2002.

6. Pharmaceutics the Science of Dosage Form Design; M.E. Aulton; Churchill Livingstone,

London; 2002.

Basic Computer Applications (CE 105) (Theory & Practical)





1. Objective of the course:

To study basic fundamental of computers

To study skill of some useful softwares related to pharmaceutical field.

To study the basic operating procedure of computer.

2. Students learning outcomes/objectives:

By the end of this course, the student should have a good understanding of the basic concepts of computer and basic software useful in pharmacy.

Students should gain knowledge of the appropriate operating procedure of computer.

3. Instructional methods and pedagogy:

The lectures will be delivered using

Black board,

Over Head Projector

Multimedia projector

4. Course Outline (Theory):

Sr. No. Title of the unit Minimum no. of contact hrs.

App. Weightage in %

1 Computer Fundamentals 3 10

2 Operating Systems 3 10

3 MS Word 6 20

4 MS Excel 6 20

5 MS PowerPoint 5 17

6 Introduction to MS Access and Outlook

2 7

7 Introduction to software’s for viewing PDF documents

1 3

8 Networking, Internet and Intranet 4 13

Total 30 100

4.1 Detailed syllabus: (Theory)



Sr. No.

Name of Topic Contact Hours

01

Computer Fundamentals Definition, characteristics, history, computer terminology, computer organization, input & output devices, storage devices (including latest devices), classifications of computers (including current computer systems), binary conversions and ASCII code, application of computers in pharmacy, introduction to computer virus, Configuration of Personal computer, Hardware, Types of software, firmware.

03

02

Operating Systems Definition, functions of an operating system, types of operating systems and their characteristics, Installation of Operating System, system utility Windows Desktop, start-menu, control panel, accessories, my computer, my documents, recycle bin, printer and mouse settings, maximizing, minimizing, restoring and closing of windows, windows explorer

03

03

MS Word Word Essentials, the word workplace, Parts of MS Word screen, Typing and Editing, Finding and Replacing, Autocorrect and Auto text, Reusing Text and Graphics, use of spell-check & grammer, thesaurus and scientific Symbols, viewing of document by various ways Editing Tools, Formatting Text Formatting Text Character, Formatting Paragraphs, Formatting and Sorting Lists, Page Design and Layout, Page Setup : Margins, Page Numbers, and Other Items, Newspaper -style Columns, Working with Tables Creating and formatting of tables and sorting, merging etc. of data in tables. Inserting, deleting and sizing of rows and columns in tables, Opening, Saving and Protecting Documents, Locating and Managing Documents Printing, Assembling Documents with Mail Merge

06

04

MS Excel Introduction to EXCEL worksheet, calculations in EXCEL, preparation of templates for application in pharmaceutical chemistry, pharmaceutical technology, pharmacology and pharmacognosy. Hierarchy of operation, library functions such as logarithm, square root, sum, average,. Drawing graphs in EXCEL line graph, histogram, pie-chart- At least one graph for each discipline of chemistry, pharmaceutical technology, pharmacology and pharmacognosy –Editing chart features such as annotation, labeling of axis, changing legends etc.

06

05 MS PowerPoint Creating and viewing a presentation, adding animations and managing slide shows etc.

05

06 Introduction to MS Access and Outlook 02



07 Introduction to software’s for viewing PDF documents (ADOBE reader, ACROBAT), Drawing simple chemical structures (CHEMSKETCH, etc.)

01

08

Networking, Internet and Intranet Introduction to network and networking devices, Computer networks, networking technology, components of network. Internet – Basic terms, software and hardware requirement for internet, process of internet working, internet tools, Email- components and working, study of pharmaceutical web sites and search engines, searching through pharmaceutical data bases, study of patent websites.

04

5. Detailed syllabus (Practical):

Sr. No. List of Practical

01 Introduction to computers • Components and operating of computers • Typing of a given document

02 MS DOS commands for creating, saving, renaming & modifying files & folders

03 MS Word • Creating and Saving of given document • Use of page setup for given document

04

MS Word • Inserting header & footer, page number in given document • Use of page break in given document • Cut –Copy – Paste, Undo & Redo of text by various ways

05 MS Word • Formatting of text and paragraphs by various ways • Use of Bullets & Numbering, Borders & Shading etc. in given document

06 MS Word • Writing a document in newspaper type columns • Use of find, replace, go to, spelling & grammer command in given document

07 MS Word • Writing Greek words and scientific symbols in MS Word • Creating and formatting of tables as per given instructions.

08 MS Word write a letter using mail merge

09 MS Excel Use of library functions such as logarithm, square root, sum, average

10 MS Excel Drawing of charts and graphs like line graph, histogram, pie-chart Editing chart features such as annotation, labeling of axis, changing legends

11 MS Power Point



Creating and viewing a presentation

12 MS Power Point Adding animations and managing slide show

13

Software Use Drawing simple chemical structures using software like CHEMSKETCH Making of simple papers of charts using software like COREL DRAW/PAGE MAKER (DTP)

14 Internet/Intranet Demonstration of internet working Demonstration of E-mail Working

15 Internet/Intranet Demonstration of Pharmaceutical Websites Mainly drug information sites & patent websites

6. Recommended study material:

1. Windows Vista: Step by Step, Joan Preppernau and Joyce Cox, Prentice Hall of India,

New Delhi, 2007. 2. Windows Vista: Plain & Simple, Jerry Joyce, and Marianne Moon, Prentice Hall of India,

New Delhi, 2007. 3. WORD 2000, Guy Hart Davis, BPB Publications, New Delhi, 1999. 4. WORD 2000: fast & easy, Diane Koers, BPB Publications, New Delhi, 2000. 5. Microsoft WORD 2000:Training Guide, Maria Reid, BPB Publications, New Delhi, 2000 6. Exploring Microsoft Office XP, John Breeden and Michael Cheek, BPB Publications, New

Delhi, 2001. 7. MS Office by Pierce, Prentice Hall of India, New Delhi, 2007 9. MS Office: Plain & Simple,

Jerry Joyce, and Marianne Moon, Prentice Hall of India, New Delhi, 2007. 8. MS Office: Step by Step, Joyce Cox, Prentice Hall of India, New Delhi, 2007. 9. Taxali R.K., P.C. Software for Windows 98 made simple – 8th Edition – 2002 – Tata Mc,

New Delhi. 10. MS – Office by Ed. Bott. & Woddy Leohad, Prentice Hall of India, New Delhi, 1999 11. Manuals available with the software. 12. Working with personal computer software: R.P.Soni, Harshal Arolkar, Sonal Jain, Books

India Publications, First Edition, New Delhi, 2008. 13. Computer Fundamentals with Pharmacy Applications: N.K.Tiwari, PharmaMed Press,

New Delhi, 2008. 14. Computers In Pharmacy: Praveen S. Thakur, Rachna Manchanda, Pratibha Nand, Birla

Publications Pvt. Ltd., Third Edition, New Delhi, 2008.

Basic Mathematics (MA 131)

Credits: 3 Contact Hours per week: 3




To introduce the basic concepts of Mathematics to students passing HSC with B-group.

Pre-requisite:

No additional Pre-requisite required.

Methodology:

The emphasis during Lecture sessions will be on Understanding of Concepts rather than on

complexities of Computational Techniques. Stress is also given on Visual perception through

Mathematical Software. Relevant Illustrations will be provided from the Real World

processes. Sufficient home assignments will be given to the students which will test their

fundamentals and ability to relate Mathematical concepts with reality.

Course Outline:


Contact Hours

Approx.

Weightage %

1 Sets, Relations and Functions 6 15 %

2 Concepts of Limit, Continuity and Differentiation 8 20 %

3 Concept of Integration 6 15 %

4 Matrices and Determinants 6 16 %

5 Equations and their solutions 8 18 %

6 Basic Statistics 11 26 %

Total 45 100 %



Detailed Syllabus:


hours

1 Sets, Relations and Functions:

- Sets, Number systems (Real and Complex numbers)

- Cartesian Product of sets

- Relations

One-One, Many-One, One-Many, Many-Many Relations

- Functions

Certain Standard functions

Polynomial, Algebraic, Exponential, Logarithmic,

Trigonometric

- Visualization of graphs of standard functions

- Curves using Mathematical Software.

6

2 Concepts of Limit, Continuity and Differentiation:

- Concept of Limits,

- Evaluation Techniques

- Continuity of functions

- Concept of Differentiation

- Derivatives of Standard Functions

- Evaluation Techniques

- Derivative as a Rate of Change

- Visualization of graphs of Continuous and Differentiable functions.

8

3 Concept of Integration:

- Indefinite Integrals (Primitives / Antiderivatives)

- Primitives of Standard Functions

- Methods of Integration

- Definite Integral

- Integration as Area under the curve

- Use of Mathematical Software for evaluating Derivatives

- Indefinite and Definite Integrals

6


hours




1. Calculus and Analytical Geometry; Thomas G. B. and R. L. Finney; Addision Wesley, 9th Ed.,

1996.

2. Advanced Engineering Mathematics; Erwin Kreyszig; Jhon Wiley & Sons, India, 8th Ed., 1999.

3. Calculus Early Transcendental; Stewart James; Thomson India; 5th Ed., 2007.

4. Advanced Engineering Mathematics; Wylie & Barrett; Mc graw Hill pub.

4 Matrices and Determinants:

- Matrices

- Matrix Operations

- Properties of Matrix Operations

- Determinants (up to order 3) and their properties

- Cofactor expansion

- The Inverse of a Matrix

- The Rank of a Matrix and Applications.

6

5 Equations and their solutions:

- Polynomial equations in single variables

- Solution of an equation

- Graphical representation of an equation

- Standard curves and surfaces

- Determination of solution of Quadratic equations

- System of Linear equations & its Matrix representation

- Consistency and solution of a System of Linear equation using

Matrix Inversion

8

6 Basic Statistics:

- Ungrouped and Grouped data

- Diagrammatic Representation of Data

- Measures of Central tendency

- Measures of Dispersion

- Computations of these measures through Statistical Software

11



5. Advanced Engineering Mathematics; Greenberg M D; Pearson Education, 2nd Edition.

Communication Skills – 1(EN 103)

(Theory and Practical)






To hone basic Communication Skills (LSRW) of the students by exposing them to the key

communication techniques, and thereby

To improvise Comprehensional and Expressional Skills of the students required for day

to day; and classroom, academic and cultural situations.

Instructional Method and Pedagogy:

Lectures will be taken in class room and practicals will be conducted in the language lab

with the use of multi-media presentations / black board work and mix of both.

Some assignments and Presentation Tasks will be given

Students will also be engaged in interpersonal communication activities such as group

discussion, role plays, simulations, just a minute sessions, etc.

Course Outline (Theory and Practical):

No. Title of the unit Minimum

number of hours

Approx.

weightage %

1. An Introduction to Communication and Key Concepts in

Communication

08 7

2. Major Communication Techniques and Styles 08 7

3. Listening Skills 08 18

4. Presentation Skills 12 18

5. Reading Skills 09 18

6. Writing Skills 09 17

7. Grammar and Vocabulary 06 15

Total 60 100%

Detailed Syllabus (Theory and Practical):




Hours

1 An Introduction to Communication and Key Concepts in

Communication:

- An Introduction to Communication

- Basic terms, concepts, and contexts of communication

- Importance, Types and Principles of Communication

08

2 Major Communication Techniques and Styles:

- Introduction to Communication styles and techniques

- Assertive, Aggressive, Passive and Passive - Aggressive

Communication

- Working with different Styles

08

3 Listening Skills:

- Introduction to Listening

- Purpose and Types of Listening

- Traits of a good listener

- Barriers to effective listening and Tips for effective listening

08

4 Presentation Skills:

- Introduction to Presentation and its importance

- Modes, Means and Purposes of Presentation

- Defining purpose, analyzing audience and organizing the contents

- Visual aids and nuances of delivery

12

5 Reading Skills:

- An Introduction to Reading and Comprehension

- Types and Techniques - Skimming and Scanning of Reading

- Inferencing in Reading

- Reading data in various forms

09




Recommended Study Material:

Reference Reading:

Developing Communication Skills Krishna Mohan & Meera Banerji

Communication Skills for Technical student Farthullah T M

Basic Business Communication 10th ed Lesikar R V & Flatley M E

Additional Reading:

Communication Skills for Engineers Mishra S & Muralikrishna C

Written Communication in English Freeman Sardh

ABC of Common Grammatical Errors Nigel B. Turton

Hours

6 Writing Skills:

- Introduction to Writing and Importance of effective writing

- Paragraph Development, Coherence – Topic Sentence, Supporting

Sentence, Authentication, and Examples

- Letter Writing and Resume Making

- Drafting…press notes, memo, circulars, notices, telegrams, agenda,

minutes etc

09

7 Grammar and Vocabulary:

- Tenses and the Concept of Time

- Active and Passive Constructions

- Direct – Indirect Speeches

- Prepositions and Conditionals

- Idioms, Confusables, One-word Substitutes, Synonyms, Antonyms

06