Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Chart StableS Specifications & Prices
Manufacturer of quality equestrian buildings
including Stables, Mobile Field Shelters &
American Barns
Garden BuildinGs
Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.2 01233 611123 [email protected] www.chartstables.co.uk
ContentS
STATic Field ShelTerSSpecifications 11
Prices 12
Frequently Asked Questions 14
STABleSSpecifications 4
Prices 6
compare the ranges 7
AMericAN BArNSSpecifications 9
Prices 9
MoBile STABleS & Field ShelTerSSpecifications 10
Prices 12-13
More photographs are available on our website www.chartstables.co.uk 3All prices exclude VAT. Prices include installation
Delivery ChargeSAvon £300 Kent Free
Bedfordshire £215 lancashire diY
Berkshire £230 leicestershire £280
Buckinghamshire £205 lincolnshire PoA
cambridgeshire £205 london £140
channel islands diY Middlesex £160
cheshire PoA Norfolk PoA
clywd diY Northamptonshire £265
cornwall £560/£860 Northumberland diY
cumbria diY Nottinghamshire £320
derbyshire £360 oxfordshire £210
devon PoA Powys diY
dorset £295 Shropshire £380
dyfed diY Somerset £350
essex £95/£170 Staffordshire £345
Glamorgan – Mid/South diY Suffolk £245
Glamorgan – West diY Surrey Free
Gloucestershire £340 Sussex – east Free
Gwent diY Sussex – West £170
Gwynedd diY Warwickshire £270
hampshire £185 Wiltshire £290
herefordshire £320 Worcestershire £320
hertfordshire £180 Yorkshire – South diY
humberside diY Yorkshire – North diY
ContaCtS & DeliverychArT STABleS+44 (0)1233 611123
chArT GArdeN BuildiNGS+44 (0)1233 229898
chArT GArAGeS+44 (0)1233 229898
FeNciNG SAleS oFFice+44 (0)1233 626188
UK & European Sales Officechart house, dencora Way, Ashford, Kent TN23 4Fh
Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.
The BudGeT rANGeWAll coNSTrucTioN ANd clAddiNGWalls are built with 75mm x 50mm (3" x 2") timber, spaced at a maximum of 600mm centres (2’) and clad with 16mm x 150mm (⅝" x 6”) Shiplap boarding all pressure treated.
rooF coNSTrucTioNPurlins are 100mm x 50mm (4” x 2”) held in place by the joist holders and covered with black Onduline roof sheeting.
doorSStable doors are 2085mm high, 1219mm wide and 50mm thick (6' 10" high, 4' wide x 2" thick) . lower doors are lined with 18mm oS Kickoarding and include a 50mm x 50mm x 50mm anti-chew strip capping the top of the lower doors only. Top doors are ledged and braced. Doors are hung on 450mm tee hinges (16”) and include a 200mm (8”) pad bolt, a kick-over latch and cabin hooks all of which are galvanised. All Stable doors are pressure treated.
WiNdoWSStable windows are available as an optional extra.
KicKBoArdSStables are lined to 1220mm with 11mm oS Kickboarding.
exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4’).
GuTTeriNG100mm half round black guttering is fitted to the front of all units.
heiGhTTo eaves 2235mm and ridge 2968mm including brickwork.
TiMBer TreATMeNTAll Stable doors and timber is pressure treated (not including roof purlins or any other doors) adding to the longevity of your buildings.
hAY SToreS ANd TAcK rooMShay Stores and Tack rooms are not lined as standard. in the case of hay Stores the front panels include 2400mm wide openings.
The cliPPer rANGeWAll coNSTrucTioNWalls are built with 75mm x 50mm (3" x 2") pressure treated timber framing, spaced at 600mm (2') centres.
WAll clAddiNGSelected high-quality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard available as an option. All boarding fixed with rust-resisting nails.
rooF coNSTrucTioNPurlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses, boarded with 11mm OSB, finishing before the centre of the roof to allow for good airflow and ventilation and then covered with black Onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured Onduline, felt, onduvilla tiles or felt tiles.
doorSStable Doors are 2085mm high, 1219mm wide, 50mm thick, (6' 10" high, 4' wide x 2" thick). Bottom doors are lined with 18mm (¾") OS boarding. Top doors are ledged and braced. Anti-chew strips are fitted to the top of the lower doors extending 380mm (15") down the front. All door fittings heavy-duty and galvanised, to include 350mm (14") adjustable hook and band hinges to top stable doors and 450mm (18") to the bottom doors, 200mm (8") pad bolts, heavy-duty kickbolts and a cabin hook to the top and bottom stable doors. Tack Room Doors are 762mm (30") wide, ledged and braced and fitted with a 200mm (8") pad boltand a cabin hook. All Stable doors are pressure treated.
WiNdoWSA fully-opening 460mm x 660mm (18" x 26") Perspex window, lined on the inside with a safety mesh, is fitted to each Stable.
cleAr rooF SheeTone clear roof sheet positioned in rear of roof of each Stable, for substantial added light from the rear.
KicKBoArdSStables are lined to 1219mm (4') high with 15mm (⅝”) OS kickboarding. Tack Rooms and Hay Stores are not lined as standard but can be lined if required.
VeNTilATioNLouvred ventilation grille is fitted to gable ends of all Stables.
exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4') and can be underlined as an optional extra.
GuTTeriNGHalf round, black guttering and downpipe is fitted to the front of all units. Rear guttering available as an optional extra.
heiGhTTo eaves, measures 2235mm (7' 4") and to ridge 2968mm (9' 8") including brickwork.
TAlK GrilleSCan be fitted between Stables as an option.
TiMBer TreATMeNTAll Stable doors and timber is pressure treated (not including roof purlins or any other doors) adding to the longevity of your buildings.
hAY SToreS ANd TAcK rooMShay Stores and Tack rooms are not lined as standard. in the case of hay Stores the front panels include 2400mm wide openings.
4 01233 611123 [email protected] www.chartstables.co.uk
Stable SPeCifiCationS
The chArT rANGeWAll coNSTrucTioNWalls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, spaced at 600mm (2') centres.
WAll clAddiNGQuality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding fixed with rust-resisting nails.
rooF coNSTrucTioNPurlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses boarded with 11mm OS Board, finishing before the centre of the roof to allow for good airflow and ventilation, then covered with black Onduline roof sheeting. One clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes include coloured onduline, onduvilla tiles or felt tiles.
doorSStable Doors are 2085mm x 1219mm x 70mm, (6' 10" x 4' x 2¾"). Bottom doors are lined with 18mm (¾") OS Kickboard. Top doors ledged and braced. Anti-chew strips are fitted to the top door surround and to the top of the lower door extending down 380mm (15"). All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges to top stable doors and 600mm (24") to the bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and a cabin hook to the top and bottom stable doors. Tack Room Doors are 838mm (33") wide, Shiplap clad, framed, ledged and braced and fitted with a 200mm (8") pad bolt and cabin hook. All Stable doors are pressure treated.
WiNdoWSA 533mm x 915mm (21" x 36") two-bladed louvred window, with a fixed clear perspex lower section, fitted to front of each Stable. Heavy duty galvanised bars fitted to the rear.
cleAr rooF SheeTone clear roof sheet positioned in rear of roof of each Stable, for substantial added light from the rear.
KicKBoArdSStables are lined to 1219mm (4') high with 18mm (¾") oS kickboards. Tack rooms and hay Stores are not lined as standard, but can be lined if required.
VeNTilATioNLouvred ventilation grilles are fitted to gable ends of Stables only.
exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4’ ) and can be underlined as an optional extra.
GuTTeriNGHalf round, black guttering and downpipe fitted to the front of all units. Rear guttering available as an optional extra.
heiGhTTo eaves, measures 2362mm (7' 8") and to ridge 3095mm (10' 2"), including brickwork.
TAlK GrilleSOne 1162mm x 864mm (46" x 34") galvanised talk grille fitted between stables as standard.
TiMBer TreATMeNTAll Stable doors and timber is pressure treated (not including roof purlins or any other doors) adding to the longevity of your buildings.
hAY SToreS ANd TAcK rooMShay Stores and Tack rooms are not lined as standard. in the case of hay Stores the front panels include 2400mm wide openings.
STA
Bl
eS
More photographs are available on our website www.chartstables.co.uk 5
The cheSTer rANGeWAll coNSTrucTioNWalls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, at 600mm (2') centres.
WAll clAddiNGSelected high-quality Shiplap boarding 19mm x 125mm (¾" x 5"), pressure treated to ensure a long maintenance-free life. Weatherboard available as an option. All boarding fixed with rust-resisting nails.
rooF coNSTrucTioNPurlins are 150mm x 50mm (6" x 2") spaced at 600mm (2') centres, held in place by joist holders on prefabricated trusses boarded with 18mm OS Board, finishing before the centre of the roof to allow for good airflow and ventilation, then covered with black Onduvilla light weight tiles. one clear roof sheet is fitted to each Stable, Corner Unit and Tack Room. Optional roof finishes includes alternative red and brown onduvilla tiles, and the option to upgrade the roof to take clay tiles or slate tiles (price on application).
doorSStable Doors are 2235mm x 1219mm x 75mm (7' 4" x 4‘ x 3") in a pressure treated frame measuring 100mm x 75mm (4" x 3") with rounded edges. Top and bottom doors are faced with TGV cladding. Bottom doors are lined with 18mm (¾") heavy-duty plywood kickboard. Top doors are ledged and braced, vertical bracing to the leading edge, and can be fully lined. Anti-chew strips encase the complete door frame and to the top door leading edge and the top of the lower door extending down 380mm (15"). All door fittings are heavy duty and galvanized; to include 600mm (24") adjustable hook and band hinges to top and bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks to all doors. Tack Room Doors are 914mm (3') wide x 2235mm (3' x 7' 4") morticed, ledged and braced frame, rebated and infilled with TGV, lined with 12mm (½") plywood, fitted with a five levered morticed door lock and a cabin hook. inward opening as standard. All Stable doors are pressure treated.
WiNdoWSA six-bladed louvre window measuring 533mm x 915mm (21" x 36") is fitted to each Stable and is fully adjustable from the outside. Heavy duty galvanised bars fitted to the rear.
cleAr rooF SheeTone clear roof sheet positioned in rear of roof of each Stable, for substantial added light from the rear.
KicKBoArdSStables are lined to 1219mm (4') high with 18mm (¾") Ply kickboards (and can be lined to eaves height, as an option). hay Stores are not lined as standard but can be lined as an option extra.
VeNTilATioNLouvred ventilation grilles are fitted to gable ends of Stables only.
exTeNded FroNT oVerhANGFront overhangs extend forward by an additional 1219mm (4’) and can be underlined in exterior-grade plywood. canopies can be increased to 1800mm (6') and include 150mm x 150mm (6" x 6") support posts, strengthened headers and attractive curved bracing.
GuTTeriNGHalf-round, black guttering and downpipe are fitted to the front of all units. Rear guttering available as an optional extra.
heiGhTTo eaves, measures 2464mm (8' 1") and to ridge 3438mm (11' 4"), including brickwork.
TAlK GrilleSOne 1727mm x 864mm (68" x 34") galvanised talk grille fitted between all stables as standard.
TiMBer TreATMeNTAll Stable doors and timber is pressure treated (not including roof purlins or any other doors) adding to the longevity of your buildings.
Stable PriCeS
Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.
All prices exclude VAT. Prices include installation - refer to page 3 for delivery charges
Budget clipper chart chester*
loose Boxes 3.6m x 3.6m (12' x 12') £1,595 £2,195 £2,995 £3,765
extra unit: £1,295 £1,695 £2,575 £3,235
4.2m x 3.6m (14' x 12') £2,645 £3,715 £4,395
extra unit: £2,025 £2,995 £3,845
Foaling Box 4.8m x 3.6m (16' x 12') £2,745 £3,950 £4,645
corner units 5.0m x 3.6m (16 1/2' x 12') £1,795 £2,995 £3,245 £3,715
5.4m x 3.6m (18' x 12') £2,525 £3,395 £3,835
Tack rooms 1.8m x 3.6m (6' x 12') £765 £1,045 £1,375 £2,325
2.4m x 3.6m (8' x 12') £875 £1,195 £1,625 £2,795
3.6m x 3.6m (12' x 12') £1,495 £1,975 £3,185
integral hay Stores 3.6m x 3.6m (12' x 12') £965 £1,295 £1,795 £2,095
5.4m x 3.6m (18' x 12') £1,575 £2,145 £2,850 £3,295
7.2m x 3.6m (24' x 12') £1,795 £2,550 £3,495 £3,995
9.1m x 3.6m (30' x 12') £2,415 £3,395 £4,485 £5,115
10.9m x 3.6m (36' x 12') £2,775 £3,825 £5,115 £5,945
covered Walkway 1.8m x 4.8m (6' x 16') £995 £1,315 £2,245
2.4m x 4.8m (8' x 16') £1,145 £1,495 £2,675
3.0m x 4.8m (10' x 16') £1,295 £1,695 £2,850
3.6m x 4.8m (12' x 16') £1,425 £1,895 £2,995
Archways 4.8m x 3.6m (16’ x 12’)
3.6m (12') to eaves, 4.3m (11') to ridge
£3,575
3.6m x 4.8m (12' x 16')
3.7m (12.2') to eaves, 4.6m (15') to ridge
£4,545
6 01233 611123 [email protected] www.chartstables.co.uk
OPTION FOR DIYAll buildings excluding our Budget range, are available for diY collection and self assembly, with a 20% saving off the unit price of each building.
*To upgrade the roof to clay or slate tiles, please call us to discuss.
Budget clipper chart chester
Wall construction 75mm x 50mm (3" x 2") 75mm x 50mm (3" x 2") 100mm x 50mm (4" x 2") 100mm x 50mm (4" x 2")
Wall cladding 16mm x 150mm (⅝" x 6") 16mm x 150mm (⅝" x 6") 16mm x 150mm (⅝" x 6") 19mm x 125mm (¾" x 5")
eaves height 2235mm (7' 4") 2235mm (7' 4") 2362mm (7' 9") 2464mm (8' 1")
ridge height 2968mm (9' 8") 2968mm (9' 8") 3095mm (10' 2") 3488mm (11' 4")
roof Purlins 100mm x 50mm (4" x 2") 125mm x 50mm (5" x 2") 125mm x 50mm (5" x 2") 150mm 50mm (6" x 2")
Treatment Tanalith e Tanalith e Tanalith e Tanalith e
Kickboard 11mm (½”) OS Board 15mm (⅝" ) OS Board 18mm (¾") oS Board 18mm (¾") Ply
roof Boarding optional extra oSB 11mm (7/16") oSB 11mm (7/16") oSB 18mm (¾")
roof covering onduline onduline onduline onduvilla light weight tiles
Window Optional Extra Fully opening perspex Two bladed louver Six bladed louver
Window Protection optional Safety mesh Safety mesh Galvanised Safety bars Galvanised Safety bars
clear roof Sheet To all Stables and Tack rooms To all Stables and Tack rooms To all Stables and Tack rooms To all Stables and Tack rooms
door height 2085mm (6' 10") 2085mm (6' 10") 2085mm (6' 10") 2235mm (7' 4")
door Width 1219mm (4') 1219mm (4') 1219mm (4') 1219mm (4')
Anti-chewstrip to
Stable doorcapping the top of bottom door
capping top of lower door and extending down 381mm (15") to the front
capping top door surround, top of lower door and extending down 381mm (15") to
the front
encase the complete door frame and to the top door leading edge and the top of lower door extending down 380mm (15”)
Anti-chewstrip to Top door Surround Not available optional extra chewstrip to top door opening surround chewstrip encasing complete door frame
Anti-chewstrip encasing door Frame Not available Not available Optional extra chewstrip encasing complete frame
door hinging 450mm (18") 450mm (18") 600mm (24") 600mm (24")
canopy 1219mm (4’) 1219mm (4') 1219mm (4') 1219mm (4')
Talk Grilles Not available Optional extra 1162mm x 864mm (46" x 34") 1727mm x 864mm (68" x 34")
Guttering 100mm (4") half round 100mm (4") half round 100mm (4") half round 100mm (4") half round
STA
Bl
eS
More photographs are available on our website www.chartstables.co.uk 7
StableS ComPare the rangeS
Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.
The cliPPer rANGe The chArT rANGe The cheSTer rANGe
8 01233 611123 [email protected] www.chartstables.co.uk
Clipper Range
2235
mm
to E
aves
2945
mm
to R
idge
3581mm Gable End
1/2 Round Gutterting
Single Course of Semi-Engineering Brick
Ex16mm x 150mm Pressure Treated Shiplap Exterior Cladding
15mm OSB Kickboarding to 1.2m high
75mm x 50mm Pressure Treated Framing Spaced at 600mm centres
Black Onduline Ridge CapsDecorative Finial
DPC (Rain Skirt)
Black Corrugated Onduline Roof Sheets
88mm x 38mm Roof Purlins In Prefabricated Steel Joist Hangers
1143mm Overhang
Chart Range Chester Range
2235
mm
to e
aves
2945
mm
to R
idge
Opening Perspex Window with Saftey Mesh
Top & Bottom Stable Door.Bottom Door 50mm thick
Botto
m D
oor 1
321m
m H
igh
Top
Doo
r 72
4mm
Hig
h
1219mm Wide
1/2 Round Guttertingto front
Guttering Down Pipe
2362
mm
to e
aves
3072
mm
to R
idge
2 Bladed Louvered Window
Top & Bottom Stable Door Bottom Door 64mm thick
1219mm Wide
1/2 Round Guttertingto front
Guttering Down Pipe
Metal Galvanised Chew Strips to the Top Door Surrounds
Botto
m D
oor 1
321m
m H
igh
Top
Doo
r 72
4mm
Hig
h
1219mm Overhang
2464
mm
to E
aves
3438
mm
to R
idge
3581mm Gable End
Single Course of Semi-Engineering Brick
Ex19mm x 125mm Pressure Treated Shiplap Exterior Cladding
1/2 Round Gutterting
150mm x 38mm Roof Purlins In Prefabricated Steel Joist Hangers
Black Onduvilla Ridge CapsDecorative FinialBlack Onduvilla
Light Weight Tiles
Roof Boarded with 18mm OSB
100mm x 50mm Pressure Treated Framing Spaced at 600mm centres
18mm PLY Kickboarding to 1.2m high
DPC (Rain Skirt)
2362
mm
to E
aves
3072
mm
to R
idge
3581mm Gable End
1/2 Round Gutterting
Single Course of Semi-Engineering Brick
Ex16mm x 150mm Pressure Treated Shiplap Exterior Cladding
18mm OSB Kickboarding to 1.2m high
100mm x 50mm Pressure Treated Framing Spaced at 600mm centres
Black Onduline Ridge CapsDecorative Finial
DPC (Rain Skirt)
Black Corrugated Onduline Roof Sheets
125mm x 38mm Roof Purlins In Prefabricated Steel Joist Hangers
1143mm Overhang
Roof Boarded with 11mm OSB
2464
mm
to e
aves
3438
mm
to R
idge
Botto
m D
oor 1
321m
m H
igh
Top
Doo
r 91
4mm
Hig
h
1219mm Wide
6 Bladed Louvered Window
Top & Bottom Stable Door Bottom Door 76mm thick
1/2 Round Guttertingto front
Guttering Down Pipe
Metal Galvanised Chew Strips encasing the complete door frame including the header
& leading edge of the top door
Roof Boarded with 11mm OSB
Clipper Range
2235
mm
to E
aves
2945
mm
to R
idge
3581mm Gable End
1/2 Round Gutterting
Single Course of Semi-Engineering Brick
Ex16mm x 150mm Pressure Treated Shiplap Exterior Cladding
15mm OSB Kickboarding to 1.2m high
75mm x 50mm Pressure Treated Framing Spaced at 600mm centres
Black Onduline Ridge CapsDecorative Finial
DPC (Rain Skirt)
Black Corrugated Onduline Roof Sheets
88mm x 38mm Roof Purlins In Prefabricated Steel Joist Hangers
1143mm Overhang
Chart Range Chester Range
2235
mm
to e
aves
2945
mm
to R
idge
Opening Perspex Window with Saftey Mesh
Top & Bottom Stable Door.Bottom Door 50mm thick
Botto
m D
oor 1
321m
m H
igh
Top
Doo
r 72
4mm
Hig
h
1219mm Wide
1/2 Round Guttertingto front
Guttering Down Pipe
2362
mm
to e
aves
3072
mm
to R
idge
2 Bladed Louvered Window
Top & Bottom Stable Door Bottom Door 64mm thick
1219mm Wide
1/2 Round Guttertingto front
Guttering Down Pipe
Metal Galvanised Chew Strips to the Top Door Surrounds
Botto
m D
oor 1
321m
m H
igh
Top
Doo
r 72
4mm
Hig
h
1219mm Overhang
2464
mm
to E
aves
3438
mm
to R
idge
3581mm Gable End
Single Course of Semi-Engineering Brick
Ex19mm x 125mm Pressure Treated Shiplap Exterior Cladding
1/2 Round Gutterting
150mm x 38mm Roof Purlins In Prefabricated Steel Joist Hangers
Black Onduvilla Ridge CapsDecorative FinialBlack Onduvilla
Light Weight Tiles
Roof Boarded with 18mm OSB
100mm x 50mm Pressure Treated Framing Spaced at 600mm centres
18mm PLY Kickboarding to 1.2m high
DPC (Rain Skirt)
2362
mm
to E
aves
3072
mm
to R
idge
3581mm Gable End
1/2 Round Gutterting
Single Course of Semi-Engineering Brick
Ex16mm x 150mm Pressure Treated Shiplap Exterior Cladding
18mm OSB Kickboarding to 1.2m high
100mm x 50mm Pressure Treated Framing Spaced at 600mm centres
Black Onduline Ridge CapsDecorative Finial
DPC (Rain Skirt)
Black Corrugated Onduline Roof Sheets
125mm x 38mm Roof Purlins In Prefabricated Steel Joist Hangers
1143mm Overhang
Roof Boarded with 11mm OSB
2464
mm
to e
aves
3438
mm
to R
idge
Botto
m D
oor 1
321m
m H
igh
Top
Doo
r 91
4mm
Hig
h
1219mm Wide
6 Bladed Louvered Window
Top & Bottom Stable Door Bottom Door 76mm thick
1/2 Round Guttertingto front
Guttering Down Pipe
Metal Galvanised Chew Strips encasing the complete door frame including the header
& leading edge of the top door
Roof Boarded with 11mm OSB
StableS
chart range
3.0m x 3.6m Stalls (10' x 12' stalls) 10.36m
(34') wide with 3.0m (10') passageway
6.0m x 10.3m (20' x 34') 4 stalls £12,415
9.1m x 10.3m (30' x 34') 6 stalls £17,425
12.1m x 10.3m (40' x 34') 8 stalls £22,495
15.2m x 10.3m (50' x 34') 10 stalls £27,495
18.2m x 10.3m (60' x 34') 12 stalls £32,645
extra 3.0m x 3.6m (10') 2 stalls £5,050
3.6m x 3.6m Stalls (12' x 12' stalls) 10.36m
(34') wide with 3.0m (10') passageway
7.3m x 10.3m (24' x 34') 4 stalls £12,695
10.9m x 10.3m (36' x 34') 6 stalls £18,175
14.6m x 10.3m (48' x 34') 8 stalls £23,695
18.3m x 10.3m (60' x 34') 10 stalls £29,145
21.9m x 10.3m (72' x 34') 12 stalls £34,625
extra 3.6m x 3.6m (12') 2 stalls £5,495
The chArT rANGeWAll coNSTrucTioNWalls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, spaced at 600mm (2') centres.
WAll clAddiNG:Selected high-quality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails.
rooF coNSTrucTioN:Purlins are 125mm x 50mm (5" x 2") spaced at 450mm (18") centres, which are held in place by joist holders on prefabricated trusses, then covered with black onduline roof sheeting. A clear roof sheet is also included above each stall. Optional roof finishes include alternative coloured Onduline roof sheets or onduvilla light weight tiles .
KicKBoArdiNG:Stalls are timber framed using 100mm x 50mm (4" x 2") and are lined up to 1219mm (4') high with 18mm oS kickboarding and the upper section is constructed using 20mm galvanised steel bars spaced at 75mm (3") centres.
TAcK rooMS ANd hAY SToreS:if you require a hay Store or Tack room these can be incorporated. Tack rooms will require a suspended ceiling incorporated.
doorS:Side-Hinged Lower Stable Door: 1219mm (w) x 1320mm (h) x 70mm (d) (48" x 52" x 2 ¾") is fitted to front of all stalls. doors are faced with Shiplap and lined with 18mm (¾") oS kickboarding. Anti-chew strips are fitted to the top door surround and to the top of the door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 600mm (24") adjustable hook and band hinges, 200mm (8") pad bolt, kickbolt and a cabin hook. All Stable doors are pressure treated.Sliding American Barn External Door: 2438mm (8') wide is fitted to the front of the building. These are not pressure treated and will require staining after installation.American Barn Top Doors: can be fitted to the rear of each stall as an option extra.
WiNdoWS:A choice of windows is available as optional extras.
VeNTilATioN:Two louvred ventilation grilles are fitted to each gable end.
GuTTeriNG:Half-round, black guttering and downpipes are fitted to both sides of the building.
heiGhT:To eaves, measures 2235mm (7' 4") and to ridge 3970mm (13'), including brickwork.
TiMBer TreATMeNT:All Stable doors and timber is pressure treated (not including roof purlins or any other doors) adding to the longevity of your buildings.
chArT rANGe iNTerNAl PArTiTioNS To supply for D.I.Y. only to go in your existing building.
3.0m x 2.2m (10' x 7' 2") dividing panel with metal grille lined with 18mm (¾") oS kickboard to 1.2m (4')
£495
3.6m x 2.2m (12' x 7' 2") dividing panel with metal grille lined with 18mm (¾") oS kickboard to 1.2m (4')
£545
3.0m x 2.2m (10' x 7' 2") dividing panel fully lined to 2.2m both sides with 18mm (¾") Ply kickboard
£345
3.6m x 2.2m (12' x 7' 2") dividing panel fully lined to 2.2m both sides with 18mm (¾") oS kickboard
£475
3.0m x 2.2m (10' x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") oS kickboard to 1.2m (4') including lower door
£415
3.6m x 2.2m (12' x 7' 2") Shiplap front panel with metal grilles lined with 18mm (¾") oS kickboard to 1.2m (4') including lower door
£455
AM
er
icA
N B
Ar
NS
All prices exclude VAT. Prices include installation - Refer to page 3 for delivery charges
9
ameriCan barn SPeCifiCationS & PriCeS
10 01233 611123 [email protected] www.chartstables.co.ukPlease Note: Timber sizes quoted are sawn dimensions and are slightly smaller after
planing. We reserve the right to alter our specifications without notice.
The cliPPer rANGeWAll coNSTrucTioNWalls are built with 75mm x 50mm (3" x 2") timber framing, spaced at 600mm (2') centres.
WAll clAddiNGQuality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails.
rooF coNSTrucTioNPurlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses. Mobile Stable roofs are boarded with 11mm OS Board, finished before the centre of the roof to allow for good airflow and ventilation, then covered with black Onduline roof sheeting. Optional roof finishes include coloured Onduline. Clear roof sheets are available as standard in Mobile Stables.
oPeNiNGS To MoBile Field ShelTerSMobile Field Shelter openings are 2.4m (8') wide and are not fitted with anti-chew strips, or slip rails but are available as an optional upgrade.
TiMBer MoBile SKidSTimber skids are constructed using pressure treated 150mm x 75mm (6" x 3") in conjunction with galvanized fixtures and fittings. Towing points are located at both ends and a heavy-duty chain is supplied.
GAlVANiSed MeTAl SKidSSteel skids are constructed using 80mm x 40mm (3" x 1½") galvanised steel. Towing points are located at both ends and a heavy-duty chain is supplied.
KicKBoArdSMobile Field Shelters and Mobile Stables are lined to 1219mm (4') high with 15mm oS kickboarding. it can be lined to eaves as an optional upgrade.
doorS To MoBile STABleS oNlYStable doors: are 1219mm (w) x 2085mm (h) x 50mm (d), (48” x 6' 10" x 2"). Bottom doors are lined on the inside with 18mm OS kickboarding. Top doors are ledged and braced. Anti-chew strips are fitted to the top of the lower door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges fitted to the lower door and 350mm (14") fitted to the top door, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks. Tack Room doors are ledged and braced and fitted with a 200mm (8") pad bolt and a cabin hook. All Stable doors are pressure treated.
cleAr rooF SheeTone clear roof sheet positioned in rear of roof of each Stable, for substantial added light from the rear.
WiNdoWS (MoBile STABleS oNlY)A fully opening 460mm x 660mm (18" x 26") clear Perspex window, lined on the inside with a safety meshto each stable.
exTeNded FroNT oVerhANGFront canopy extends forward to 1219mm (4').
GuTTeriNG:Half-round, black guttering and downpipe are fitted to the front of all units. Rear guttering is available.
heiGhT:To eaves measures 2235mm (7' 4") and to ridge 2968mm (9' 8"), including skids.
TiMBer TreATMeNT:All Stable doors and timber is pressure treated (not including roof purlins or any other doors) adding to the longevity of your buildings.
mobile Stable & fielD Shelter SPeCifiCationS
Mo
Bil
e S
TAB
le
S &
Mo
Bil
e F
iel
d S
he
lTe
rS
cleAr rooF SheeTone clear roof sheet positioned in rear of roof of each Stable, for substantial added light from the rear.
TAlK GrilleS To MoBile STABleS oNlY:one 1162mm x 864mm (46" x 34") galvanised talk grille is fitted between stables, as standard.
exTeNded FroNT oVerhANG:Front canopy extends forward to 1219mm (4').
GuTTeriNG:half-round, black guttering and downpipe is fitted to the front of all units. rear guttering is available.
heiGhT:To eaves measures 2362mm (7’ 8") and to ridge 3095mm (10' 2"), including skids.
TiMBer TreATMeNT:All Stable doors and timber is pressure treated (not including roof purlins or any other doors) adding to the longevity of your buildings.
The chArT rANGeWAll coNSTrucTioNWalls are built with 100mm x 50mm (4" x 2") pressure treated timber framing, spaced at 600mm (2') centres.
WAll clAddiNGSelected high-quality Shiplap boarding 16mm x 150mm (⅝" x 6"), pressure treated to ensure a long maintenance-free life. Weatherboard is available as an option. All boarding is fixed with rust-resisting nails.
rooF coNSTrucTioN:Purlins are 125mm x 50mm (5" x 2") spaced at a maximum of 600mm (2') centres, held in place by joist holders on prefabricated trusses. Mobile Stable and Mobile Field Shelter roofs are boarded with 11mm oS Board finishing before the centre of the roof to allow for good airflow and ventilation, then covered with black onduline roof sheeting. optional roof finishes include coloured onduline and onduvilla light weight tiles. A large clear roof sheet is fitted to each Mobile Stable as standard.
oPeNiNG To MoBile Field ShelTerS:Mobile Field Shelter openings are 2.4m (8') wide and the vertical sides are lined with anti-chew strips, 100mm x 50mm (4" x 2") slip rail and brackets.
TiMBer MoBile SKidSTimber skids are constructed using pressure treated 150mm x 75mm (6" x 3"), in conjunction with 50mm x 50mm x 4mm metal steels. Towing points are located at both ends and a heavy-duty chain is supplied.
GAlVANiSed MeTAl SKidS:Metal skids are constructed using 100mm x 100mm x 5mm (4" x 4") galvanised steel. Towing points are located at both ends and a heavy-duty chain is supplied.
KicKBoArdS:Mobile Field Shelters and Mobile Stables are lined to 1219mm (4') high with 18mm (¾") oS kickboarding and can be fully lined to eaves if required. Alternative types of kickboard are available.
doorS To MoBile STABleS oNlY:Stable Doors: are 2085mm high, 1219mm wide, 70mm thick, (6' 10" high, 4' wide, 2¾" thick). Bottom doors are lined with 18mm (¾") oS kickboarding. Top doors are ledged and braced. Anti-chew strips are fitted to the top door surround and to the top of the lower door extending 380mm (15") down the front. All door fittings are heavy-duty and galvanised, to include 450mm (18") adjustable hook and band hinges to the top stable doors and 600mm (24") to the bottom stable doors, 200mm (8") pad bolts, heavy-duty kickbolts and cabin hooks are fitted to the top and bottom stable doors. Tack Room Doors: are ledged and braced and fitted with a 200mm (8") pad bolt and a cabin hook. All Stable doors are pressure treated.
WiNdoWS To MoBile STABleS oNlY:A 533mm x 915mm (21" x 36") two-bladed louvred window, with a fixed clear Perspex lower section, isfitted to each Stable and is adjustable from the outside. Heavy-duty galvanised metal bars are fittedto the inside.
StatiC fielD ShelterSour Static Field Shelters are built to the same specification as our Mobile Field Shelters, except the Static Field Shelters do not come with skids but are instead bolted down to a concrete pad with a single course of brickwork.
Mobile Field Shelter Static Field Shelter
More photographs are available on our website www.chartstables.co.uk 11
mobile Stable PriCeS
Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.
StatiC fielD Shelter PriCeSSTATic Field ShelTerS
clipper chart
Apex roof
No canopy
Shiplap
3.6m x 3.6m (12' x 12') £2,095 £2,325
5.4m x 3.6m (18' x 12') £2,525 £3,195
7.2m x 3.6m (24' x 12') £3,275 £3,845
9.14m x 3.6m (30' x 12') £3,795 £4,995
10.9m x 3.6m (36' x 12') £4,495 £5,115
clipper chart
Apex roof
1.2m (4')
canopy
Shiplap
3.6m x 3.6m (12' x 12') £2,145 £2,525
5.4m x 3.6m (18' x 12') £2,745 £3,495
7.2m x 3.6m (24' x 12') £3,450 £4,225
9.1m x 3.6m (30' x 12') £4,150 £5,495
10.9m x 3.6m (36' x 12') £4,845 £5,995
MoBile STABleSclipper chart
Timber Skids
1.2m (4') canopy
3.6m x 3.6m (12' x 12') £2,975 £3,245
7.0m x 3.6m (23' x 12') £4,545 £6,195
Metal Skids
1.2m (4') canopy
3.6m x 3.6m (12' x 12') £3,025 £3,950
7.2m x 3.6m (24' x 12') £4,925 £6,995
10.9m x 3.6m (36' x 12') £6,825 £9,595
MoBile STABle coMBiNATioN uNiTSclipper chart
Timber Skids
1.2m (4') canopy
Shiplap
3.6m x 3.6m Stable (12' x 12') with a 1.8m x 3.6m (6' x 12') Tack room £3,650 £4,845
3.6m x 3.6m Stable (12' x 12') with a 2.4m x 3.6m (8' x 12') Tack room £3,895 £4,995
3.6m x 3.6m Stable (12' x 12') with a 3.0m x 3.6m (10' x 12') Tack room £3,945 £5,275
Metal Skids
1.2m (4') canopy
Shiplap
3.6m x 3.6m Stable (12' x 12') with a 1.8m x 3.6m (6' x 12') Tack room £4,225 £5,495
3.6m x 3.6m Stable (12' x 12') with a 2.4m x 3.6m (8' x 12') Tack room £4,495 £5,750
7.2m x 3.6m double Stable (24' x 12') with a 1.8m x 3.6m (6' x 12') Tack room £6,215 £8,650
7.2m x 3.6m double Stable (24' x 12') with a 2.4m x 3.6m (8' x 12') Tack room £6,495 £8,950
3.6m x 3.6m Stable (12' x 12') with a 3.6m x 3.6m (12' x 12') hay Store £4,345 £6,195
3.6m x 3.6m Stable (12' x 12') with a 7.2m x 3.6m (24' x 12') hay Store £5,995 £8,245
7.2m x 3.6m double Stable (24' x 12') with a 3.6m x 3.6m (12' x 12') hay Store £6,450 £8,995
12 01233 611123 [email protected] www.chartstables.co.uk
All prices exclude VAT. Prices include installation - refer to page 3 for delivery charges
MoBile Field ShelTer coMBiNATioN uNiTS
clipper chart
Timber Skids 1.2m (4') canopy Shiplap
3.6m x 3.6m (12' x 12') Field Shelter with a 1.8m x 3.6m (6' x 12') Tack room £3,495 £4,845
3.6m x 3.6m (12' x 12') Field Shelter with a 2.4m x 3.6m (8' x 12') Tack room £3,825 £4,995
Metal Skids1.2m (4') canopy Shiplap
3.6m x 3.6m (12' x 12') Field Shelter with a 1.8m x 3.6m (6' x 12') Tack room £3,825 £4,925
3.6m x 3.6m (12' x 12') Field Shelter with a 2.4m x 3.6m (8' x 12') Tack room £3,995 £5,345
7.2m x 3.6m (24' x 12') Field Shelter with a 1.8m x 3.6m (6' x 12') Tack room £5,695 £6,995
7.2m x 3.6m (24' x 12') Field Shelter with a 2.4m x 3.6m (8' x 12') Tack room £5,825 £7,450
Mo
Bil
e S
TAB
le
S &
Mo
Bil
e F
iel
d S
he
lTe
rS
More photographs are available on our website www.chartstables.co.uk 13
MoBile Field ShelTerSclipper chart
Timber Skids
1.2m (4') canopy
Shiplap
3.6m x 3.6m (12' x 12') £2,325 £2,745
5.4m x 3.6m (18' x 12') £2,895 £3,845
7.0m x 3.6m (23' x 12') £3,795 £4,475
Metal Skids
1.2m (4') canopy
Shiplap
3.6m x 3.6m (12' x 12') £2,695 £3,395
5.4m x 3.6m (18' x 12') £3,135 £4,535
7.2m x 3.6m (24' x 12') £4,150 £5,350
9.1m x 3.6m (30' x 12') £4,925 £6,995
10.9m x 3.6m (36' x 12') £5,645 £7,525
clipper chart
Wall construction 75mm x 50mm (3" x 2") 100mm x 50mm (4" x 2")
roof lining 11mm (7/16") oSB 11mm (7/16") oSB
Metal Skids 80mm x 40mm (3¼" x 17/8") 100mm x 100mm (4" x 4")
Timber Skids 150mm x 75mm (6" x 3") 150mm x 75mm (6" x 3")
Kickboards 15mm (5/8") oSB 18mm (¾") oSB
roof Purlins 125mm x 50mm (5" x 2") 125mm x 50mm (5" x 2")
Full detailed specifications can be found on pages 10 & 11
All prices exclude VAT. Prices include installation - refer to page 3 for delivery charges
coMPAre The rANGeS
mobile fielD Shelter PriCeS
Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing. We reserve the right to alter our specifications without notice.
deliVerY AcroSS The uK & euroPeuNiTed KiNGdoM deliVerY & BuildiNG iNSTAllATioN:in almost all cases we deliver and install our buildings. Where the option for diY is preferred we have established relations with several reliable hauliers or clients can arrange their own collection. Please contact our support team for further details. You will be supplied you with Self-Assembly Guidelines drawn up for your building.
deliVerY To The chANNel iSlANdS:Our Equestrian buildings are available on a DIY basis to the Channel Islands. We offer guidance on how to arrange this, having helped many customers from the channel islands organize this over many years. Please call our support team to discuss this further.
FrANce & euroPeAN deliVerY & iNSTAllATioN:We have established experience of delivering our buildings down through France and across europe. We are ideally positioned here in Kent, within close proximity to dover docks and calais, to supply our clients across mainland europe. We work closely with two hauliers who travel from Kent across europe weekly and can deliver your buildings for self assembly. We can advise on planning applications and VAT exemption, if applicable.our aim is always to ensure the purchase of your chart Stables is as stress free as possible and that you will go on to enjoy many years of pleasure from our buildings.
diY collecTioN:From our Workshops here in Ashford, TN23 4Fh. You will be supplied with Self-Assembly Guidelines drawn up for your building.
PrePArATioN & PlANNiNG SerVicePlANNiNG ANd AdVice SerVice:We can support you with your planning application, providing you with elevated drawings to accompany your planning application. In addition, our support staff can talk you through the design of your equestrian building and give general advice regarding groundworks that may need to be completed prior to assembly.
do i Need PlANNiNG PerMiSSioN:Whilst this will not be the answer you will want to hear, in 99% of cases the answer is yes. We would always suggest that a telephone call to your local council is a good idea. They should give you some good, free advice and in most cases visit you. Listening to their suggestions in the first place may possibly save you time and money. Whilst we cannot give you the advice that a Planning consultant can, we are able to offer you a helping hand, based on our experience over the years.
hoW loNG Will PlANNiNG PerMiSSioN TAKe:Approximately 8 - 10 weeks.
cAN i rePlAce old BuildiNGS:Yes, but always make sure you are building like-for-like. Do not exceed the original ground floor area or height. We suggest that you take some photographs of the original buildings. We would advise that you always refer to your local Planning Portal as each local authority does have the right to implement their own rules.
hoW do i Go ABouT GeTTiNG PlANNiNG PerMiSSioN:Firstly, you will need to ask your local council for the necessary forms if submitting a paper submission alternatively apply on line. These are not as daunting as you may think. The council will need a scaled site plan, clearly marked with the position of your new buildings and six copies of elevated drawings. We can supply elevated drawings to you, if required we can also advise on Site Plan preparations. Finally, a cheque or BAcs transfer will need to be sent to the council along with your chosen application process.
deliVerY dAY:on the delivery day it is imperative that our team can get easy and close access to the erecting site. They will work productively and courteously and leave the site tidy.
ProjecT coMPleTioN:on completion, our senior installer will require you to ensure everything has been carried out to your satisfaction and will then require the final payment.
14 01233 611123 [email protected] www.chartstables.co.uk
frequently aSkeD queStionS
diY TiMBer BuildiNGSWe offer substantial discounts for DIY buildings collected from our Workshops in Ashford.Buildings are supplied complete. All the components are cut to size, and all the necessary screws, nails and bolts are included in order to make the assembly process as straight forward as possible.Self Assembly Guidelines and Panel Plans are included and in the unlikely event you encounter a problem, we have experienced staff available to offer advice, over the phone.The tools you will need include a hammer, hand saw, cordless screwdriver and a hammer drill.A question often asked is how long it will take to assemble. As a guide our installation teams, as an example will assemble a single 12' x 12' (3.6m x 3.6m) Stable in approximately an hour and a half. But please remember we are assembling buildings on a daily basis and it is highly unlikely that you would be able to match this time.
Health and Safety is uppermost in our minds and we would urge you to take great care. The wall panels of our buildings are very heavy, so lifting them can be an issue. Particular care must be taken when on roofs and Scaffold Towers should be used. We would further recommend the use of safety boots and protective eye wear at all times. in the event you need advice we would suggest speaking to your local health and Safety executive, useful information can be found on their website: www.hse.gov.uk
TiMBer TreATMeNTchart Stables, along with probably 98% of the country’s leading timber frame building manufacturers have been using a pressure treatment process for twenty years, to BS & eu Standards.
WhAT iS TANAliSed TiMBer:Tanalised timber has been impregnated with Tanalith e (used to pressure treat timber) , a waterborne product based on copper triazole technology. copper is derived from recycled sources and triazoles are organic biodegradable biocides, commonly used to protect many of the food crops we eat.This type of timber treatment is used extensively throughout the world and is used in the construction of timber buildings; eg within timber garages, play ground equipment, fencing, timber decking, the list is endless.Pressure treated timber ensures a long maintenance-free life against fungal decay (rot) and insect attack.
WhAT iS The diFFereNce BeTWeeN PreSSure TreATiNG, diPPed & SPrAYed TiMBer:Buildings that have been manufactured and then dipped or sprayed do not offer the same long term protection. This is a considerably cheaper option with untreated timber costing approximately 15% less than timber that has been pressure treated. This represents a substantial saving to the manufac-turer who doesn't use pressure treated timbers.Perhaps more frustratingly, if your building has not been pressure treated it will require repeated treatments, by yourself, during its life at additional cost and inconvenience to you.
WhY chooSe TANAliSed TiMBer:do you want to spend time and money every year treating your building or do you want the maintenance-free option that opting for chart’s Tanalised timber offers? Our aim here at Chart Stables is to offer you a building with minimal maintenance during its life except keeping it cobweb free!
FAQ
S
More photographs are available on our website www.chartstables.co.uk 15
www.chartgarages.co.uk
+44 (0)1233 229898
www.chartfencing.co.uk
+44 (0)1233 626188
www.chartgardenbuildings.co.uk
+44 (0)1233 229898
Garden [email protected]
+44 (0)1233 611123
Please Note: Timber sizes quoted are sawn dimensions and are slightly smaller after planing.
We reserve the right to make any changes at any time, without notice, in prices, colours, materials, and specifications, and also to discontinue products. E&OE. 07.2020
Chart Stables, Garages & Garden Rooms, UK & European Sales Office . Chart Fencing Office
chart house, dencora Way, Ashford, Kent TN23 4Fh
www.chartstables.co.uk