diagramas.diagramasde.comdiagramas.diagramasde.com/televisores/jvc chassis cg4... · 2010-08-04 · 1-2 (No.YA391) SPECIFICATION Design and specifications are subject to change without

SERVICE MANUAL

COPYRIGHT © 2006 Victor Company of Japan, Limited No.YA3912006/4

COLOUR TELEVISIONYA39120064

AV-14A16, AV-14A16/A,AV-14A16/L, AV-14FMG6B/G

TABLE OF CONTENTS1 PRECAUTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-32 SPECIFIC SERVICE INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-43 DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-54 ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-135 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26

BASIC CHASSIS

CG4

AV-14A16

AV-14A16/A

AV-14A16/L

AV-14FMG6B/G

1-2 (No.YA391)

SPECIFICATION

Design and specifications are subject to change without notice.

Items

ContentsAV-14A16

AV-14A16/AAV-14A16/L

AV-14FMG6B/G

Dimensions (W × H × D) 36.4 cm × 33.4 cm × 37.4 cm 46.2 cm × 34.1 cm × 37.5 cm

Mass 9 kg 10 kg

TV RF System B/G, I, D/K B/G, I, D/K, M

Colour System PALSECAMNTSC 3.58 / NTSC 4.43 (NTSC:EXT only).

PALSECAMNTSC 3.58 / NTSC 4.43

ReceivingFrequency

VHF LowVHF High

UHFCATV

46.25 MHz to 140.25 MHz147.25 MHz to 423.25 MHz431.25 MHz to 863.25 MHzMid (X to Z+2, S1 to S10) / Super (S11 to S20) / Hyper (S21 to S41) bands

Intermediate Frequency VIF 38.0 MHz (B/G, I, D/K) 38.0 MHz (B/G, I, D/K, M)

SIF 32.5 MHz (5.5 MHz: B/G)32MHz (6.0 MHz: I)31.5MHz (6.5 MHz: D/K)

32.5 MHz (5.5 MHz: B/G)32MHz (6.0 MHz: I)31.5MHz (6.5 MHz: D/K)33.5MHz (4.5 MHz: M)

Colour Sub Carrier PALSECAM

NTSC

4.43 MHz4.40625 MHz / 4.25 MHz3.58 MHz / 4.43 MHz

Power Input AC110 V to AC240 V, 50 Hz / 60Hz

Power Consumption 68 W (Max) / 47W(Avg)

Picture Tube Visible size: 34 cm measured diagonally ( H : 28.7 cm × V : 21.7 cm)

High Voltage 22.5 kV±1.5kV (at zero beam current)

Speaker 8 cm Round type × 1 5 cm × 9 cm, Oval type × 2

Audio Power Output 3 W (monaural)

Aerial Input Terminal 75 Ω unbalanced, coaxial

Input Terminal[Front / Rear]

VideoAudio

1 V(p-p), 75 Ω, RCA pin jack × 2500 mV(rms) (-4 dBs), High impedance, RCA pin jack × 2

Output Terminal[Rear]

VideoAudio

1 V(p-p), 75Ω, RCA pin jack × 1500 mV(rms) (-4 dBs), Low impedance, RCA pin jack × 1

Headphone Jack 3.5 mm mini jack × 1

Remote Control Unit RM-C360GY (Battery size : AA / R6 / UM-3 × 2)

(No.YA391)1-3

SECTION 1PRECAUTION

1.1 SAFETY PRECAUTIONS(1) The design of this product contains special hardware,

many circuits and components specially for safetypurposes. For continued protection, no changes should bemade to the original design unless authorized in writing bythe manufacturer. Replacement parts must be identical tothose used in the original circuits. Service should beperformed by qualified personnel only.

(2) Alterations of the design or circuitry of the products shouldnot be made. Any design alterations or additions will voidthe manufacturer's warranty and will further relieve themanufacturer of responsibility for personal injury orproperty damage resulting therefrom.

(3) Many electrical and mechanical parts in the products havespecial safety-related characteristics. Thesecharacteristics are often not evident from visual inspectionnor can the protection afforded by them necessarily beobtained by using replacement components rated forhigher voltage, wattage, etc. Replacement parts whichhave these special safety characteristics are identified inthe parts list of Service manual. Electrical componentshaving such features are identified by shading on theschematics and by ( ) on the parts list in Servicemanual. The use of a substitute replacement which doesnot have the same safety characteristics as therecommended replacement part shown in the parts list ofService manual may cause shock, fire, or other hazards.

(4) Don't short between the LIVE side ground andISOLATED (NEUTRAL) side ground or EARTH sideground when repairing. Some model's power circuit is partly different in the GND.The difference of the GND is shown by the LIVE : ( ) sideGND, the ISOLATED (NEUTRAL) : ( ) side GND andEARTH : ( ) side GND. Don't short between the LIVE side GND and ISOLATED(NEUTRAL) side GND or EARTH side GND and nevermeasure the LIVE side GND and ISOLATED (NEUTRAL)side GND or EARTH side GND at the same time with ameasuring apparatus (oscilloscope etc.). If above note willnot be kept, a fuse or any parts will be broken.

(5) If any repair has been made to the chassis, it isrecommended that the B1 setting should be checked oradjusted (See ADJUSTMENT OF B1 POWER SUPPLY).

(6) The high voltage applied to the picture tube must conformwith that specified in Service manual. Excessive highvoltage can cause an increase in X-Ray emission, arcingand possible component damage, therefore operationunder excessive high voltage conditions should be kept toa minimum, or should be prevented. If severe arcingoccurs, remove the AC power immediately and determinethe cause by visual inspection (incorrect installation,cracked or melted high voltage harness, poor soldering,etc.). To maintain the proper minimum level of soft X-Rayemission, components in the high voltage circuitryincluding the picture tube must be the exact replacementsor alternatives approved by the manufacturer of thecomplete product.

(7) Do not check high voltage by drawing an arc. Use a highvoltage meter or a high voltage probe with a VTVM.Discharge the picture tube before attempting meterconnection, by connecting a clip lead to the ground frameand connecting the other end of the lead through a 10kΩ2W resistor to the anode button.

(8) When service is required, observe the original lead dress.Extra precaution should be given to assure correct leaddress in the high voltage circuit area. Where a short circuithas occurred, those components that indicate evidence ofoverheating should be replaced. Always use themanufacturer's replacement components.

(9) Isolation Check (Safety for Electrical Shock Hazard) After re-assembling the product, always perform anisolation check on the exposed metal parts of the cabinet(antenna terminals, video/audio input and output terminals,Control knobs, metal cabinet, screw heads, earphone jack,control shafts, etc.) to be sure the product is safe to operatewithout danger of electrical shock.

a) Dielectric Strength Test The isolation between the AC primary circuit and all metalparts exposed to the user, particularly any exposed metalpart having a return path to the chassis should withstand avoltage of 3000V AC (r.m.s.) for a period of one second. (.. . . Withstand a voltage of 1100V AC (r.m.s.) to anappliance rated up to 120V, and 3000V AC (r.m.s.) to anappliance rated 200V or more, for a period of one second.) This method of test requires a test equipment not generallyfound in the service trade.

b) Leakage Current Check Plug the AC line cord directly into the AC outlet (do not usea line isolation transformer during this check.). Using a"Leakage Current Tester", measure the leakage currentfrom each exposed metal part of the cabinet, particularlyany exposed metal part having a return path to the chassis,to a known good earth ground (water pipe, etc.). Anyleakage current must not exceed 0.5mA AC (r.m.s.). However, in tropical area, this must not exceed 0.2mA AC(r.m.s.). Alternate Check Method

Plug the AC line cord directly into the AC outlet (do notuse a line isolation transformer during this check.). Usean AC voltmeter having 1000Ω per volt or moresensitivity in the following manner. Connect a 1500Ω10W resistor paralleled by a 0.15µF AC-type capacitorbetween an exposed metal part and a known good earthground (water pipe, etc.). Measure the AC voltageacross the resistor with the AC voltmeter. Move theresistor connection to each exposed metal part,particularly any exposed metal part having a return pathto the chassis, and measure the AC voltage across theresistor. Now, reverse the plug in the AC outlet andrepeat each measurement. Any voltage measured mustnot exceed 0.75V AC (r.m.s.). This corresponds to0.5mA AC (r.m.s.). However, in tropical area, this must not exceed 0.3V AC(r.m.s.). This corresponds to 0.2mA AC (r.m.s.).

AC VOLTMETER(HAVING 1000 /V,OR MORE SENSITIVITY)

PLACE THIS PROBEON EACH EXPOSEDMETAL PART1500 10W

0.15 F AC-TYPE

GOOD EARTH GROUND

1-4 (No.YA391)

SECTION 2SPECIFIC SERVICE INSTRUCTIONS

2.1 FEATURESPICTURE MODE

This function can adjust the picture settings automatically.There are BRIGHT, STANDARD and SOFT in the PICTUREMODE.

RETURN +This function can set a channel you frequently view to theReturn Channel and you can view that channel at any time withone-touch.

CHILD LOCKUse this function to prevent children from operating the TVwithout parental consent.

VNRThis function can reduce the picture noise.

2.2 MAIN DIFFERENCE LIST

2.3 TECHNINAL INFORMATION2.3.1 MAIN MI-COM (CPU) PIN FUNCTION

Item AV-14A16 AV-14A16/A AV-14A16/L AV-14FMG6B/GCabinet Design A type cabinet ← ← F type cabinet

Paint Colour Silver ← ← Black

LED colour Green/Red ← ← Red/Orange

TV RF System B/G, I, D/K ← ← B/G, I, D/K, M

OSD Language Eng, Chi, Malay, Ind ← ← Eng, Ara, Per, Rus

Speaker 8cm Round type ×1 ← ← 5cm x 9cm Oval type ×2

MAIN PWB SCG-1552-H2 SCG-1555-H2 SCG-1553-H2 SCG-1554-H2

Pin No. Pin name I/O Function Pin

No. Pin name I/O Function

1 REMOCON I Remote control 22 PROTECT I Low B protect detection [Detect: H]

2 SDA2 I/O Data for Inter IC control (For main memory) 23 P_ON/OFF I Main power control [ON : H]

3 SCL2 O Clock for Inter IC contorl (For main memory) 24 LOCK - Not used

4 BUS_FREE - Not used 25 3.58/OTH - Not used

5 NC - Not used 26 4.5/OTH - Not used

6 KEY1 I Key scan for front key (Menu CH -/+) 27 H_SYNC I Horizontal sync

7 KEY2 I Key scan for front key (Vol -/+) 28 I/II - Not used

8 ECO IN - Not used 29 OSD_Ys O Ys (blanking) for OSD

9 AFT I AFT voltage for tuner 30 OSD_B O Blue for OSD

10 LED[POW] - Not used 31 OSD_G O Green for OSD

11 LED[TIM] O Liting for timer [Liting : H] 32 OSD_R O Red for OSD

12 GND - GND 33 NC - Not used

13 NC - Not used 34 RST I CPU reset [Reset:L]

14 NC - Not used 35 V_SYNC I Vertical sync

15 TV/V - Not used 36 TCLOCK - Not used

16 TEXT RESET - Not used 37 SDA1 I/O Data for Inter IC control (For generally)

17 ACL ON/OFF - Not used 38 SCL1 O Clock for Inter IC contorl (For generally)

18 VOL O Volume control 39 VDD I 3.3V

19 A_MUTE O Aodio muting [Muting : H] 40 OSC1 I System clock oscillation (4MHz)

20 NC - Not used 41 OSC2 O System clock oscillation (4MHz)

21 TEXT/OTH - Not used 42 VSS - GND

(No.YA391)1-5

SECTION 3DISASSEMBLY

3.1 DISASSEMBLY PROCEDURE [AV-14A16, AV-14A16/A, AV-14A16/L]3.1.1 REMOVING THE REAR COVER• Unplug the power cord.

(1) Remove the 4 screws [A], 1 screw [B] and 1 screw [C] asshown in Fig.1.

(2) Withdraw the REAR COVER toward you.

CAUTION:When reinstalling the rear cover, carefully push it inward afterinserting the MAIN PWB into the REAR COVER groove.

3.1.2 REMOVING THE MAIN PW BOARD• Remove the REAR COVER.

(1) Slightly raise the both sides of the MAIN PWB by hand.(2) Withdraw the MAIN PWB backward.

(If necessary, take off the wire clamp and connectors, etc.)

3.1.3 REMOVING THE SPEAKER• Remove the REAR COVER.• Remove the MAIN PW BOARD.

(1) Raise the SPEAKER HOLDER claw [D] slightly, andremove the SPEAKER HOLDER.

(2) Remove the SPEAKER.

3.1.4 CHECKING THE MAIN PW BOARD• To check the back side of the MAIN PWB.

(1) Pull out the MAIN PWB. (Refer to REMOVING THE MAINPW BOARD).

(2) Erect the MAIN PWB vertically so that you can easily checkits back side.

CAUTIONS:• Before turning on power, make sure that the CRT earth wire

and other connectors are properly connected.• When repairing, connect the DEG. COIL to the DEG.

connector on the MAIN PWB.

3.1.5 WIRE CLAMPING AND CABLE TYING(1) Be sure to clamp the wire.(2) Never remove the cable tie used for tying the wires

together.Should it be inadvertently removed, be sure to tie the wireswith a new cable tie.

1-6 (No.YA391)

For models AV-14A16, AV-14A16/L, AV-14A16/A

Fig.1

REAR COVER

SPEAKER HOLDER

SPEAKER

FRONT CABINET

CRT SOCKET PWB

(Within MAIN PWB)

MAIN PWBPOWER CORD

D

C

B

A

(No.YA391)1-7

3.2 DISASSEMBLY PROCEDURE [AV-14FMG6B/G]3.2.1 REMOVING THE REAR COVER• Unplug the power cord.

(1) Remove the 4 screws [A], 1 screw [B] and 1 screw [C] asshown in Fig.2.

(2) Withdraw the REAR COVER toward you.

CAUTION:When reinstalling the rear cover, carefully push it inward afterinserting the MAIN PWB into the REAR COVER groove.

3.2.2 REMOVING THE MAIN PW BOARD• Remove the REAR COVER.

(1) Slightly raise the both sides of the MAIN PWB by hand.(2) Withdraw the MAIN PWB backward.

(If necessary, take off the wire clamp and connectors, etc.)

3.2.3 REMOVING THE SPEAKER• Remove the REAR COVER.

(1) Remove the 2 screws [D] as shown in Fig.2.(2) Follow the same steps when removing the other hand

SPEAKER.

3.2.4 CHECKING THE MAIN PW BOARD• To check the back side of the MAIN PWB.

(1) Pull out the MAIN PWB. (Refer to REMOVING THE MAINPW BOARD).

(2) Erect the MAIN PWB vertically so that you can easily checkits back side.

CAUTIONS:• Before turning on power, make sure that the CRT earth wire

and other connectors are properly connected.• When repairing, connect the DEG. COIL to the DEG.

connector on the MAIN PWB.

3.2.5 WIRE CLAMPING AND CABLE TYING(1) Be sure to clamp the wire.(2) Never remove the cable tie used for tying the wires

together.Should it be inadvertently removed, be sure to tie the wireswith a new cable tie.

1-8 (No.YA391)

For models AV-14FMG6B/G

Fig.2

FRONT CABINET

SPEAKER

REAR COVER

MAIN PWB

SPEAKER

CRT SOCKET PWB

(Within MAIN PWB)

A

C

B

D

D

POWER CORD

(No.YA391)1-9

3.3 MEMORY IC REPLACEMENT• This model uses the memory IC.• This memory IC stores data for proper operation of the video and drive circuits.• When replacing, be sure to use an IC containing this (initial value) data.

3.3.1 MEMORY IC REPLACEMENT PROCEDURE1. Power off

Switch off the power and disconnect the power plug from theAC outlet.

2. Replace the memory ICBe sure to use the memory IC written with the initial settingvalues.

3. Power onConnect the power plug to the AC outlet and switch on thepower.

4. System constant check and setting• It must not adjust without adjustment signals.

(1) Press the [DISPLAY] key and the [PICTURE MODE]key of the REMOTE CONTROL UNIT simultaneously.

(2) The SERVICE MENU screen of Fig. 1 will be displayed.(3) While the SERVICE MENU is displayed, again press the

[DISPLAY] key and [PICTURE MODE] keysimultaneously, and the SYSTEM CONSTANT SETscreen of Fig. 2 will be displayed.

(4) Check the setting values of the SYSTEM CONSTANTSETTING. If the value is different, select the setting itemwith the [MENU / ] key, and set the correct value withthe [MENU - / +] key.

(5) Press the [DISPLAY] key twice, and return to the normalscreen.

5. Receiving channel settingRefer to the OPERATING INSTRUCTIONS and set thereceive channels (Channels Preset) as described.

6. User settingsCheck the user setting items according to the given in pagelater.Where these do not agree, refer to the OPERATINGINSTRUCTIONS and set the items as described.

7. SERVICE MENU settingVerify what to set in the SERVICE MENU, and set whatever isnecessary (Fig.1). Refer to the SERVICE ADJUSTMENT for setting.

Fig.1

Fig.2

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

CHANNEL VOLUME

MUTING

SOUND

MENU

PICTUREMODE key

MENU / key

DISPLAY key

MENU- / + key

NUMBERSkey

KEY ASSIGNMENT OF REMOTE CONTROL UNIT

SERVICE MENU

1.IF 2.V/C

3.DEF 4.VSM PRESET

5.PRESET

6.SETUP TOUR OFF

1-6 : SELECT DISP : EXIT

************ **.*** *** ** **** ***

COLOUR : TRIPLE

BILINGUAL : NO

TUNER : MU

ECO SENSOR : NO

LANGUAGE : E/R/C/M/I

SYSTEM CONSTANT SET 1

: SELECT

- / + : OPERATE DISP : EXIT/

B/B SOUND : OFF

LOCK : 180

COLOUR AUTO : NO

QSS : MINT

ALC : NO

TEXT RATE : 20


: SEL - / + : OPE DISP : EXIT/

AMP TUNER : NO

VNR : YES

TEXT TABLE : CYL

VOLUME PWM : POS


: SEL - / + : OPE DISP : EXIT/

SYSTEM CONSTANT- I

SYSTEM CONSTANT- II

SYSTEM CONSTANT- III

1-10 (No.YA391)

3.3.2 SETTINGS OF FACTORY SHIPMENT3.3.2.1 BUTTON OPERATION

3.3.2.2 REMOTE CONTROL DIRECT OPERATION

3.3.2.3 REMOTE CONTROL MENU OPERATION(1) MENU-1

(2) MENU-2

(3) MENU-3

(4) MENU-4

3.3.3 SYSTEM CONSTANT SETTING

Setting item Setting positionPOWER Off

CHANNEL PR1

VOLUME 10

Setting item Setting positionCHANNEL PR1

VOLUME 10

TV/VIDEO TV

PICTURE MODE BRIGHT

COLOUR SYSTEM PAL

SOUND SYSTEM B/G

Setting item Setting positionINPUT TV

ON TIMER PR1 0:00

VNR OFF

Setting item Setting positionAUTO SHUTOFF OFF

CHILD LOCK OFF

BLUE BACK OFF

Setting item Setting positionSETUP TOUR ON

LANGUAGE ENGLISH

Setting itemSetting position

BRIGHT STANDARD SOFTTINT 15 15 15

COLOUR 15 15 15

BRIGHT 15 15 15

CONT. 30 15 13

SHARP 15 15 12

Setting itemSetting value

AV-14A16 AV-14A16/A AV-14A16/L AV-14FMG6B/GCOLOUR TRIPLE ← ← MULTI

BILINGUAL NO ← ← ←

TUNER MU ← ← ←

ECO SENSOR NO ← ← ←

LANGUAGE E / C / M / I ← ← E / R / A / P

B/B SOUND OFF ← ← ←

LOCK 180 ← ← ←

COLOUR AUTO NO ← ← YES

QSS MINT ← ← ←

ALC NO ← ← ←

TEXT RATE 20 ← ← ←

AMP TUNER NO ← ← ←

VNR YES ← ← ←

TEXT TABLE CYL ← ← ←

VOLUM PWM POS ← ← ←

(No.YA391)1-11

3.3.4 SERVICE MENU SETTING ITEMS

3.3.5 REPLACEMENT OF IC301 (IF V/C DECODER)• For the IC301(IF V/C DECODER) of this model, all data are written in the micro-computer. So, write the data in the micro-

computer in accordance with the following procedures before starting adjustment.

PROCEDURES(1) Turn the POWER OFF.(2) Replace the IC301 with a new one.(3) While pressing [MENU] button and [VOL+] button ON the FRONT CABINET simultaneously, turn the POWER ON. When the

POWER is turned ON, the data is written in the micro-computer immediately.

LOCATIONS OF FRONT PANEL BUTTONS

Setting item Setting value Setting item Setting value2. V/C 1.CUT OFF

2.DRIVE 3.BRIGHT4.CONT.5.COLOUR6.TINT7.SECAM BL ADJUST8.SHARP [Do not adjust] 9.AMP T. SHARP [Do not adjust]

5. PRESET[Do not adjust]

Colour System 1. C-TRAP FIX2. SHARP PEAK3. ABL4. GAMMA5. Y. DELAY TIME6. BLACK EXP START7. C-BPF8. CW / SCP9. VIF DET LEVEL11. IF AGC MIN12. VIF AGC13. VIF PMOD19. VNR20. RGB LIM21. RGB LIMIT LEVEL23. TEXT H. POSITION24. READ DATA

3. DEFLECTION 1. VER. POSITION2. HOR. POSITION3. VER. HEIGHT4. VER. LINEARITY5. VER. SCURVE6. HOR. VCO ADJUST [Do not adjust]

4.VSM PRESET TINT COLOUR BRIGHT CONT. SHARP

Sound System 10. SIF DET LEVEL14. SIF BPF BW ADJUST15. SIF TRAP F0 ADJUST16. SIF TRAP F0 ADJUST 217. SIF -TRAP18. SIF -BPF22. SIF SW

VOLUME + POWER

AV-14A16

AV-14A16/A

AV-14A16/L AV-14FMG6B/G

MENUVOLUME + POWERMENU

1-12 (No.YA391)

3.4 REPLACEMENT OF CHIP COMPONENT3.4.1 CAUTIONS

(1) Avoid heating for more than 3 seconds. (2) Do not rub the electrodes and the resist parts of the pattern.(3) When removing a chip part, melt the solder adequately. (4) Do not reuse a chip part after removing it.

3.4.2 SOLDERING IRON(1) Use a high insulation soldering iron with a thin pointed end of it. (2) A 30w soldering iron is recommended for easily removing parts.

3.4.3 REPLACEMENT STEPS 1. How to remove Chip parts

[Resistors, capacitors, etc.]

(1) As shown in the figure, push the part with tweezers andalternately melt the solder at each end.

(2) Shift with the tweezers and remove the chip part.

[Transistors, diodes, variable resistors, etc.]

(1) Apply extra solder to each lead.

(2) As shown in the figure, push the part with tweezers andalternately melt the solder at each lead. Shift and removethe chip part.

NOTE :After removing the part, remove remaining solder from thepattern.

2. How to install Chip parts

[Resistors, capacitors, etc.]

(1) Apply solder to the pattern as indicated in the figure.

(2) Grasp the chip part with tweezers and place it on thesolder. Then heat and melt the solder at both ends of thechip part.

[Transistors, diodes, variable resistors, etc.]

(1) Apply solder to the pattern as indicated in the figure. (2) Grasp the chip part with tweezers and place it on the

solder. (3) First solder lead A as indicated in the figure.

(4) Then solder leads B and C.

SOLDER SOLDER

A

B

C

A

B

C

(No.YA391)1-13

SECTION 4ADJUSTMENT

4.1 ADJUSTMENT PREPARATION(1) There are 2 ways of adjusting this TV : One is with the

REMOTE CONTROL UNIT and the other is theconventional method using adjustment parts andcomponents.

(2) The adjustment using the REMOTE CONTROL UNIT ismade on the basis of the initial setting values. Thesetting values which adjust the screen to the optimumcondition can be different from the initial settingvalues.

(3) Make sure that connection is correctly made AC to ACpower source.

(4) Turn on the power of the TV and measuring instruments forwarming up for at least 30 minutes before startingadjustments.

(5) If the receive or input signal is not specified, use the mostappropriate signal for adjustment.

(6) Never touch the parts (such as variable resistors,transformers and condensers) not shown in the adjustmentitems of this service adjustment.

4.2 PRESET SETTING BEFORE ADJUSTMENTUnless otherwise specified in the adjustment items, preset thefollowing functions with the REMOTE CONTROL UNIT.

4.3 MEASURING INSTRUMENT AND FIXTURES(1) DC voltmeter (or digital voltmeter)(2) Oscilloscope(3) Signal generator

(Pattern generator : PAL / SECAM / NTSC)(4) Remote control unit

4.4 ADJUSTMENT ITEMS CHECK ITEM• B1 VOLTAGE check

TUNER / IF CIRCUIT• IF VCO adjustment• DELAY POINT adjustment

FOCUS• FOCUS adjustment

DEFLECTION CIRCUIT• V.HEIGHT / V.POSITION adjustment• H. POSITION adjustment• V.LINEARITY / V.S-CURVE adjustment

VIDEO CIRCUIT• WHITE BALANCE adjustment• SUB BRIGHT adjustment• SUB CONTRAST adjustment• SUB COLOUR adjustment• SUB TINT adjustment• SECAM BALACK OFFSET adjustment

VSM PRESET SETTING• VSM PRESET setting

Item Preset valuePICTURE MODE BRIGHT

TINT / COLOUR / BRIGHT / CONT. / SHARP Centre

VNR OFF

BLUE BACK OFF

OFF TIMER OFF

AUTO SHUT OFF OFF

1-14 (No.YA391)

4.5 ADJUSTMENT LOCATIONS

1Pin TP-91(B1)2Pin NC3Pin X-ray14Pin X-ray25Pin TP-E( )

HVT

S1 HV

U

IC301

MEMORY ICIC702IC701

F901

DEG

TU001

FRONT

TOP

MAIN PWB

CRT SOCKET PWB (SOLDER SIDE)

E1

U

T

PW

UPPER:FOCUSLOWER:SCREEN

TP-47G/RTP-47B

TP-E

T

CRT EARTH WIRE(BRAIDED ASS'Y)

5 1

(No.YA391)1-15

4.6 BASIC OPERATION OF SERVICE MENU4.6.1 TOOL OF SERVICE MENU OPERATIONOperate the SERVICE MENU with the REMOTE CONTROL UNIT.

4.6.2 SERVICE MENU ITEMS With the SERVICE MENU, various adjustments can be made, and they are broadly classified in the following items of settings.

4.6.3 HOW TO ENTER THE SERVICE MENUPress the [DISPLAY] key and the [PICTURE MODE] key ofthe REMOTE CONTROL UNIT simultaneously. Then enter theSERVICE MENU mode as shown in Fig.1.

Fig.1

4.6.4 HOW TO STORE THE SETTING VALUEThe setting value will be stored automatically when release theREMOTE CONTROL UNIT keys

4.6.5 HOW TO EXIT THE SERVICE MENUWhen complete the adjustment work, press the [DISPLAY]key to return to the SERVICE MENU. And then press the[DISPLAY] key again to return to the normal screen.

4.6.6 SELECTION OF SUB MENU SCREENPress one of [1] to [5] keys of the REMOTE CONTROL UNITand select the SUB MENU SCREEN form the SERVICEMENU.

1.IF Adjustment of the IF circuits.

2.V/C Adjustment of the VIDEO circuit.

3.DEF Adjustment of the DEFLECTION circuit.

4.VSM PRESET Adjustment of the initial setting values of VSM condition as STANDARD, SOFT and BRIGHT.

5.PRESET Adjustment of the RF circuit [Do not adjust].6.SETUP TOUR It should be able to select mode (LANGUAGE and AUTO CH PRESET) [Should be OFF].

SERVICE MENU

1.IF 2.V/C

3.DEF 4.VSM PRESET

5.PRESET

6.SETUP TOUR OFF


************ **.*** *** ** **** ***

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

CHANNEL VOLUME

MUTING

SOUND

MENU

PICTUREMODE key

MENU / key

DISPLAY key

MENU- / + key

NUMBERSkey

SERVICE MODE SELECT KEY

1-16 (No.YA391)

4.6.7 METHOD OF SETTING 1. IF

[1. VCO]

[2. DELAY POINT]

NOTE:When the setting value has been changed, the new value will be stored in memory immediately.

2. V/C, 3. DEF and 4. VSM PRESET

NOTE:When the setting value has been changed, the new value will be stored in memory immediately.

5. PRESET (Do not adjust) 6. SETUP TOUR

(1) [1] key Select 1. IF.

(2) [1] key Select 1. VCO.

(3) [MENU / ] keys Select setting items.

(4) [MENU - / +] keys Adjust the values of the items.

(5) [DISPLAY] key As you press this key twice, you will return to the SERVICE MENU.

(1) [1] key Select 1. IF.

(2) [2] key Select 2. DELAY POINT.

(3) [MENU - / +] keys Set (adjust) the setting values of the setting items.

(4) [DISPLAY] key When this is pressed twice, you will return to the SERVICE MENU.

(1) [2] to [4] keys Select one from 2. V/C, 3. DEF and 4. VSM PRESET.

(2) [MENU / ] keys Select setting items.

(3) [MENU - / +] keys Adjust the values of the items.

(4) [DISPLAY] key When this is pressed, you will return to the SERVICE MENU.

(1) By pressing the [6] key, you can change the ON or OFF [should be OFF]. Should be OFF:

If it is ON, when you turn off the power and turn on a power again, the JVC’s logo will be shownabout 15 seconds automatically, and the SETUP TOUR starts.

(2) [MENU - / +] keys Select Language.

(3) [MENU ] key Auto Search.

(No.YA391)1-17

4.6.8 SERVICE MENU FLOW CHARTSERVICE MENU

IF

1. VCO

2. DELAY POINT


1. IF

VCO (CW) ***.** MHz

TOO HIGH

ABOVE REFERENCE

JUST REFERENCE

BELOW REFERENCE

TOO LOW

AFT ADJUST *** (**)

VCO ADJUST *** (**)

FINE DISP : EXIT

DELAY POINT UHF

AGC TAKE-OVER **

- / + : OPERATE DISP : EXIT

6. SETUP TOUR OFF

BRIGHT

TINT **COLOUR **BRIGHT **CONT. **SHARP **


4. VSM PRESET

/ : SELECT

DEF AUTO


3. DEF

/ : SELECT

50Hz

1. VER. POSITION **

V/C PAL

1. CUTOFF (R) * ** (G) * ** (B) * **


50Hz

2. V/C

/ : SELECT

PRESET AUTO

1. C-TRAP FIX *


50Hz B/G

5. PRESET

/ : SELECT

SERVICE MENU

1.IF 2.V/C

3.DEF 4.VSM PRESET

5.PRESET

6.SETUP TOUR OFF


************ **.*** ************ **.*** *** ** **** ***

ON / OFF

(By pressing [6] key)

1-18 (No.YA391)

4.7 INITIAL SETTING VALUE OF SERVICE MENU• Adjustment of the SERVICE MENU is made on the basis of the initial setting values ; however, the new setting values which

set the screen in its optimum condition may differ from the initial setting.• Do not change the initial Setting Values of the Setting (Adjustment) items not listed in "ADJUSTMENT PROCEDURE".[2. V/C]

[3. DEFLECTION]

[4.VSM PRESET]

Setting item Variable rangeInitial setting value

PAL SECAM NTSC 3.58 NTSC 4.431.CUT OFF RED -128 - +127 -50 -50 -50 -50

GREEN -128 - +127 -50 -50 -50 -50

BLUE -128 - +127 -50 -50 -50 -50

2.DRIVE RED -128 - +127 +0 +0 +0 +0

BLUE -128 - +127 +0 +0 +0 +0

3.BRIGHT -128 - +127 +0 +0 +0 +0

4.CONT. -63 - +63 +0 +0 +0 +0

5.COLOUR -63 - +63 +0 +0 +0 0

6.TINT TV -63 - +63 --- --- +0 0

VIDEO -63 - +63 --- --- +0 0

7.SECAM BL ADJUST -31 - +31 +0 +0 +0 +0

8.SHARP (Do not adjust)

TV -31 - +31 -17 (Fixed) -17 (Fixed) -17 (Fixed) -17 (Fixed)

VIDEO -31 - +31 +10 (Fixed) +10 (Fixed) +10 (Fixed) +10 (Fixed)

9.AMP T. SHARP -31 - +31 -14 -14 -14 -14


fv : 50Hz fv : 60Hz1. VER. POSITION -4 - +3 +0 -3

2. HOR. POSITION -16 - +15 +1 +4

3. VER. HEIGHT -64 - +63 -20 -2

4. VER. LINEARITY -32 - +31 +15 +0

5. VER. SCURVE -32 - +31 -32 +0

6. HOR. VCO ADJUST [Do not adjust] -63 - +63 +0 +0


BRIGHT STANDARD SOFTTINT 0 - 30 15 15 15

COLOUR 0 - 30 15 15 15

BRIGHT 0 - 30 15 15 15

CONT. 0 - 30 30 15 13

SHARP 0 - 30 15 15 12

(No.YA391)1-19

[5. PRESET]The items in the following table, it is no requirement for adjustment.If values had changed by the miss operation, set theinitial setting values in the following table.

COLOUR SYSTEM (Do not adjust)

SOUND SYSTEM (Do not adjust)

Setting item Variable rangeInitial setting value (Fixed value)

PAL SECAM NTSC 3.58 NTSC 4.431. C TRAP FIX 0 - 1 1 1 1 1

2. SHARP PEAK 0 - 1 0 0 0 0

3. ABL 0 - 1 1 1 1 1

4. GAMMA 0 - 1 0 0 0 0

5. Y. DELAY TIME TV 0 - 3 0 2 2 3

VIDEO 0 - 3 0 2 0 2

6. BLACK EXP START 0 - 3 3 3 3 3

7. C-BPF TV 0 - 1 1 1 0 0

VIDEO 0 - 1 1 1 1 1

8. CW / SCP 0 - 1 0 0 0 0

9. VIF DET LEVEL -63 - +63 +0 +0 +0 +0

11. IF AGC MIN 0 - 1 0 0 0 0

12. VIF AGC 0 - 1 0 0 0 0

13. VIF PMOD 0 - 1 0 0 0 0

19. VNR 0 - 63 15 15 15 15

20. RGB LIM 0 - 1 1 1 1 1

21. RGB LIMIT LEVEL 0 - 7 2 2 2 2

23. TEXT H. POSITION -16 - +15 -3 -3 -3 -3

24. READ DATA --- --- --- --- ---

Setting item Variable rangeInitial setting value (Fixed value)

B/G I D/K M10. SIF DET LEVEL -7 - +7 +0 +0 +0 +0

14. SIF BPF BW ADJUST -7 - +7 +0 +0 +0 +0

15. SIF TRAP FO ADJUST -7 - +7 +0 +0 +0 +0

16. SIF TRAP FO ADJUST 2 -7 - +7 +0 +0 +0 +0

17. SIF -TRAP 0 - 1 0 0 0 0

18. SIF -BPF 0 - 1 0 0 0 1

22. SIF SW 0 - 1 1 1 1 0

1-20 (No.YA391)

4.8 ADJUSTMENT PROCEDURE4.8.1 CHECK ITEM

4.8.2 TUNER / IF CIRCUIT

Item Measuring instrument Test point Adjustment part Description

B1 VOLTAGE Signal generator DC voltmeter

TP-B1 : 1-pinTP-E : 5-pin(S1 connector)[MAIN PWB]

(1) Receive a whole black signal.(2) Connect a DC voltmeter to 1-pin and 5-pin of S1

connector.(3) Make sure that the voltage is DC116.2V±2.0V.


IF VCO Signal generator Remote control unit

[1. IF]1. VCO

• Please use a signal generator which is frequency outputis correctly calibrated.(1) Receive any broadcast.(2) Select 1.IF from the SERVICE MENU.(3) Select < 1.VCO >.(4) Select VCO ADJUST with [MENU / ] key.(5) Press [MENU - / +] keys until the colour of the

characters TOO HIGH changes blue to yellow. Thengradually press the [MENU - / +] keys until the TOOLOW changes yellow. At this time, confirm that thevalue of VCO ADJUST is near +00.

(6) Select AFT ADJUST with [MENU / ] key.(7) Press [MENU - / +] keys until the characters JUST

REFERENCE changes blue to yellow.(8) Press the [DISPLAY] key three times to return to

normal screen.

VCO (CW) ***.** MHz

TOO HIGH

ABOVE REFERENCE

JUST REFERENCE

BELOW REFERENCE

TOO LOW

AFT ADJUST ***(**)

FINE

DISP : EXIT

VCO ADJUST ***(**)

YELLOW

ADJUSTMENT AT THIS POINT

IS USELESS

ABOVE REFERENCE

TOO HIGH

BELOW REFERENCE

JUST REFERENCE

TOO LOW

ADJUSTMENT POINT

(No.YA391)1-21

4.8.3 FOCUS

DELAY POINT (AGC)

Signal generator Remote control unit

[1. IF]2. DELAY POINT (AGC TAKE-OVER)

(1) Receive a black and white signal (colour off).(2) Select 1. IF.(3) Select < 2. DELAY POINT >.(4) Set the setting values of the setting items as shown

bellow table.(5) Then adjust the [MENU - / +] keys until video noise

disappears.(6) Turn to other channels and make sure that there are

no irregularities.


DELAY POINT UHF

AGC TAKE-OVER **


Setting Item Variable range Initial setting value

45

35

DELAY POINT

(AGC TAKE-OVER) 0 - 127NTSC3.58

OTHER


FOCUS Signalgenerator

FOCUS VR[In HVT]

(1) Receive a crosshatch signal.(2) While watching the screen, adjust the FOCUS VR to

make the vertical and horizontal lines as fine andsharp as possible.

(3) Make sure that when the screen is darkened, thelines remain in good focus.

1-22 (No.YA391)

4.8.4 DEFLECTION CIRCUIT• There are 2 modes of adjustment (setting value) 50Hz mode and 60Hz mode, depending upon the kind of signals (vertical frequency

50Hz / 60Hz).• When adjusted in 50Hz mode and 60Hz mode will be automatically set.

The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values.The settingvalues which adjust the screen to the optimum condition can be different from the initial setting values.

• Make sure that the adjustment is properly done on the screen of 60Hz mode.

NOTE:• Adjust to make both 50Hz & 60Hz are the same v. size and fine straight line.• When adjust again, adjust 50Hz mode first.• When adjust in 60Hz mode, only 60Hz mode is adjust.


V. HEIGHT / V. POSITION

Signalgenerator Remote control unit

[3. DEF]1. VER. POSITION3. VER. HEIGHT

(1) Receive a crosshatch signal.(2) Select 3. DEF from the SERVICE MENU.(3) Select < 1. VER. POSITION >.(4) Set the initial setting value of < 1. VER. POSITION >.(5) Adjust < 1. VER. POSITION > to make the vertical

centre fall on the display centre.(6) Select <3. VER. HEIGHT >.(7) Set the initial setting value of <3. VER. HEIGHT >.(8) Adjust <3. VER. HEIGHT > to make the vertical

screen size be 92% of the picture size.

Fig.1

H. POSITION Signal generator Remote control unit

[3. DEF]2. HOR. POSITION

(1) Receive a circle pattern signal.(2) Select 3. DEF from the SERVICE MENU.(3) Select < 2. HOR. POSITION >.(4) Set the initial setting value of < 2. HOR. POSITION >.(5) Adjust <2.HOR. POSITION> to be equal the width of

(A) and (B) as shown in Fig.2.

Fig.2

V.LINEARITY /V.S-CURVE


[3. DEF]4. VER. LIN.5. VER. SCURVE

• If the vertical linearity is noticeably deteriorated, performthe following steps.(1) Receive a crosshatch signal.(2) Select 3. DEF from the SERVICE MENU.(3) Select < 4. VER. LIN. >.(4) Set the initial setting value of < 4. VER. LIN. >.(5) Select < 5. VER. SCURVE >.(6) Set the initial setting value of < 5. VER. SCURVE >.(7) Adjust < 4. VER. LIN. > and < 5. VER. SCURVE >

so that the space of upper and lower lines as shownin Fig.3 on TOP, CENTRE and BOTTOM becomeuniform.

Fig.3

Screen

size

Picture

size

100%

(A) (B)

Top

Centre

Bottom

(No.YA391)1-23

4.8.5 VIDEO CIRCUITThe setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values. The settingvalues which adjust the screen to the optimum condition can be different from the initial setting values. Do not change theinitial setting values of the setting items not listed in "ADJUSTMENT PROCEDURE".


WHITE BALANCE (LOW LIGHT)


[2.V/C]1. CUT OFF (R)1. CUT OFF (G)1. CUT OFF (B) SCREEN VR[IN HVT]

(1) Receive a black and white signal (colour off).(2) Select 2. V/C from the SERVICE MENU.(3) Select < 1. CUT OFF >.(4) Set the initial setting value of < 1. CUT OFF >.(5) Press the [1] key to show the single horizontal line

on screen.(6) Turn the SCREEN VR fully counter-clockwise, then

slowly turn it clockwise to where one of a red, blue orgreen colour is faintly visible.

(7) Adjust the two colors which did not appear until thesingle horizontal line that is displayed becomeswhite using the [4] to [9] keys.

(8) Turn the SCREEN VR to where the single horizontalline glows faintly.

(9) Press the [2] key to turn off the single horizontal line.(10) Press the [DISPLAY] key twice to return to the nor-

mal screen.

WHITE BALANCE (HIGH LIGHT)


[2.V/C]2. DRIVE (R)2. DRIVE (B)

(1) Receive a black and white signal (colour off).(2) Select 2. V/C from the SERVICE MENU.(3) Select < 2. DRIVE >.(4) Set the initial setting value of < 2. DRIVE >.(5) Adjust the screen until it becomes white using the

[4], [6], [7] and [9] keys.(6) Press the [DISPLAY] key twice to return to the nom-

al screen.

SUB BRIGHT Remote control unit

[2. V/C]3. BRIGHT

(1) Receive any broadcast.(2) Select 2. V/C from the SERVICE MENU.(3) Select < 3. BRIGHT >.(4) Set the initial setting value of < 3. BRIGHT >.(5) If the brightness is not the best with the initial setting

value, make fine adjustment until you get the bestbrightness.

SUB CONTRAST

Remote control unit

[2. V/C]4. CONT.

(1) Receive any broadcast.(2) Select 2. V/C from the SERVICE MENU.(3) Select < 4. CONT >.(4) Set the initial setting value of < 4. CONT >.(5) If the contrast is not the best with the initial setting

value, make fine adjustment until you get the bestcontrast.

1 2 3

CUTOFF ON(H.LINE ON)

CUTOFF OFF

(H.LINE OFF)

R G B

G.CUTOFF( )

B. CUTOFF( )

B. CUTOFF( )

G.CUTOFF( )

4 5 6

7 8 9


R. CUTOFF( )

R. CUTOFF( )

1 2 3

R B

4 5 6

7 8 9


B. DRIVE( )R. DRIVE( )

R. DRIVE( ) B. DRIVE( )

1-24 (No.YA391)

SUB COLOUR Remote control unit

[2. V/C]5. COLOUR(PAL / SECAM / NTSC)

[Method of adjustment without measuring instrument]PAL COLOUR

(1) Receive a PAL broadcast.(2) Select 2. V/C from the SERVICE MENU.(3) Select < 5. COLOUR >.(4) Set the initial setting value of < 5. COLOUR >.(5) If the colour is not the best with the initial setting

value, make fine adjustment until you get the bestcolour.

SECAM COLOUR(1) Receive a SECAM broadcast.(2) Make fine adjustment of SECAM COLOUR as

previously.

NTSC 3.58 COLOUR(1) Receive a NTSC 3.58MHz broadcast.(2) Make similar fine adjustment of NTSC 3.58

COLOUR as previously.

NTSC 4.43 COLOUR(1) When NTSC 3.58 adjustment completed, NTSC

4.43 will be automatically set at the respectivevalues.

Signal generator Oscilloscope Remote control unit

TP-47G/RTP-E[CRT SOCKET PWB]

[2. V/C]5. COLOUR(PAL / SECAM / NTSC)

[Method of adjustment using measuring instrument]PAL COLOUR

(1) Receive a PAL full field colour bar signal (75%white).

(2) Select 2. V/C from the SERVICE MENU.(3) Select < 5. COLOUR >.(4) Set the initial setting value of < 5. COLOUR >.(5) Connect the oscilloscope to TP-47G/R and TP-E.(6) Adjust PAL COLOUR to bring the value of (A) in

the voltage table.

SECAM COLOUR(1) Receive a SECAM full field colour bar signal (75%

white).(2) Set the initial setting value of SECAM COLOUR .(3) Adjust SECAM COLOUR to bring the value of (A)

in the voltage table.

NTSC 3.58 COLOUR(1) Receive a NTSC 3.58 full field colour bar signal

(75% white).(2) Set the initial setting value of NTSC 3.58

COLOUR.(3) Adjust NTSC 3.58 COLOUR to bring the value of

(A) in the voltage table.

NTSC 4.43 COLOUR(1) When NTSC 3.58 is set, NTSC 4.43 will be

automatically set at the respective values.


WY

CG

MR

B

(A)

0V

(+)

Voltage setting (A)

PAL SECAM NTSC3.58

+10V

+10V

+10V

+10V

+10V

(VIDEO)

+10V

(RF)

---

NTSC4.43

AV-14A16

AV-14A16/A

AV-14A16/L

---

AV-14FMG6B/G

MODEL

(No.YA391)1-25

SUB TINT Signal generator Remote control unit

[2. V/C]6. TINT

[Method of adjustment without measuring instrument]NTSC 3.58 TINT

(1) Receive a NTSC 3.58 full field colour bar signal(75% white).

(2) Select 2. V/C from the SERVICE MENU.(3) Select < 6. TINT >.(4) Set the initial setting value of < 6. TINT >.(5) If you cannot get the best tint with the initial setting

value, make fine adjustment until you get the besttint.

NTSC 4.43 TINT(1) When NTSC 3.58 is set, NTSC 4.43 will be


Signal generator Oscilloscope Remote control unit

TP-47G/RTP-E[CRT SOCKET PWB]

[2. V/C]6. TINT

[Method of adjustment using measuring instrument]NTSC 3.58 TINT

(1) Receive a NTSC 3.58 full field colour bar signal(75% white).

(2) Select 2. V/C from the SERVICE MENU.(3) Select < 6. TINT >.(4) Set the initial setting value of < 6. TINT >.(5) Connect the oscilloscope to TP-47G/R and TP-E.(6) Adjust NTSC 3.58 TINT to bring the value of (B)

in the voltage table in the left.

NTSC 4.43 TINT(1) When NTSC 3.58 is set, NTSC 4.43 will be



WY

CG

MR

B

(B)0V

(-)

(+)

Voltage setting (B)

NTSC3.58

+8V

(VIDEO)

+7V

(RF)

---

NTSC4.43

---

MODEL

AV-14A16

AV-14A16/A

AV-14A16/L

AV-14FMG6B/G

1-26 (No.YA391)

4.8.6 VSM PRESET SETTING

SECTION 5TROUBLESHOOTING

This service manual does not describe TROUBLESHOOTING.

SECAM BLACK OFFSET


[2. V/C]7. SECAM BL ADJUST

(1) Input a SECAM full field colour bar signal.(2) Select 2. V/C from the SERVICE MENU.(3) Select < 7. SECAM BL ADJUST >.(4) Set the initial setting value of < 7. SECAM BL

ADJUST >.(5) Switch the [1] key (colour OFF) and [2] key (colour

ON) and make sure that there is no colour on theblack and white screen.

(6) If the black and white screen is not best with theinitial setting value, make fine adjustment until youget the best black and white screen.

(7) While watching the screen, adjust the value to be thesame colour between ON & OFF by [1] or [2] key.

(8) Press the [DISPLAY] key twice to return to thenormal screen.



VSM PRESET Remote control unit

[4. VSM PRESET]TINTCOLOURBRIGHTCONT.SHARP

(1) Select 4. VSM PRESET from the SERVICE MENU.(2) Set the PICTURE MODE to BRIGHT.(3) Select < TINT >.(4) Set the initial setting value of < TINT > as shown in

the below table.(5) Select < COLOUR > to < SHARP > in turn, and set

the values.(6) Respectively select the "SOFT" and "STANDARD".

Make similar adjustment as same step as above.

TINT

COLOUR

BRIGHT

CONT.

SHARP

VSM PRESET VSM PRESET

Setting item BRIGHT

15

15

15

30

15

STANDARD SOFT

15 13

12

BRIGHT

/ : SELECT

- / + : OPREATE DISP : EXIT

TINT **

COLOUR **

BRIGHT **

CONT. **SHARP **

(No.YA391)

CRT Display Category 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, JapanVictor Company of Japan, Limited

VPTPrinted in Japan

GGT0106-001A-H0206-NIC-JMT © 2006 Victor Company of Japan, Limited

COLOUR TELEVISION

INSTRUCTIONSThank you for buying this JVCcolour television.To make sure you understand how touse your new TV, please read thismanual thoroughly before you begin.

AV-14A16AV-21B16AV-21F16AV-21T16

Contents

Safety precautions 2Preparation 3

1 Confirm which remote control you have ...... 32 Inserting the batteries ................................... 33 Connecting the aerial and external devices ... 44 Connecting the power cord ........................ 65 SETUP TOUR .............................................. 6

Basic operation 7Remote control buttons and functions 8

PICTURE MODE button ................................. 8COLOUR SYSTEM button ............................. 8SOUND SYSTEM button ............................... 8DISPLAY button ............................................. 9RETURN + button .......................................... 9CHANNEL SCAN button ................................ 9MUTING button ............................................. 9OFF TIMER button ......................................... 9

Using the TV’s menus 10Basic operation ............................................ 10ON TIMER ..................................................... 11INPUT ........................................................... 11VNR ............................................................... 12AUTO SHUTOFF .......................................... 12CHILD LOCK ................................................. 12BLUE BACK .................................................. 12SETUP TOUR ............................................... 13LANGUAGE .................................................. 13AUTO CH PRESET ....................................... 13MANUAL CH PRESET .................................. 14SKIP .............................................................. 15Picture Adjustments .................................... 15

Using the buttons on the TV 16Troubleshooting 18Specifications 19

GGT0106-001A-H_Cover 16/1/06, 5:48 PM3

2

Safety precautions

WARNING• To prevent fire or shock hazard, do not expose the TV to rain or moisture.

CAUTION•Operate only from the power source indicated on the rear of the TV.•Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by

the mains plug. Do not pull on the power cord.•Never block or cover the cabinet openings for

ventilation. Never install the TV where goodventilation is unattainable. When installingthis TV, leave spaces for ventilation aroundthe TV more than the minimum distancesshown in the diagram.

•Do not allow objects or liquid into thecabinet openings.

• In the event of a fault, unplug the TV and call a service technician. Do not attempt torepair it by yourself or remove the rear cover.

•The surface of the TV screen is easily damaged. Be very careful with it when handlingthe TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub itforcefully. Never use any cleaner or detergent on it.

•This TV can be turned on/ off power by connecting/ disconnecting the AC Plug into ACoutlet. While this TV is being installed, enough space should be reserved for connecting/disconnecting the AC Plug into AC outlet by hand.

15 cm

10 cm 15 cm10 cm

GGT0106-001A-H_P02-05 1/18/06, 9:492

3

Preparation

1 Confirm which remote control you have

RM-C360GY

2 Inserting the batteriesCorrectly insert two batteries, observing the , and. polarities and inserting the . end first.

CAUTION:Follow the cautions printed on the batteries.

Notes:• Use AA/R6/UM-3 dry cell batteries.• If the remote control does not work properly, fit new

batteries.The supplied batteries are for testing, not regular use.

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

VOLUME

MUTING

SOUND

CHANNEL

REMOTE CONTROL UNITRM-C360GY

PICTUREMODE

GGT0106-001A-H_P02-05 16/1/06, 5:48 PM3

4

Preparation

3 Connecting the aerial and external devices• For further details, refer to the manuals provided with the devices you are connecting.• Connecting cables are not supplied.• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack

is output through both. You cannot provide input to both the front and rear jacks at the sametime. Disconnect one input, or use one of the jacks as an output jack only (for monitoring orrecording).

Connecting the aerial and VCR

Connecting the aerial

• Illustration of AV-14A16.



VIDEO AUDIO

IN

OUT

(VIDEO - 1)

VHF/UHF outdoor aerial

VIDEO AUDIO

IN

OUT

(VIDEO - 1)

To RF output

To video output

To aerial input

To audio output

3

2

VCR


1

GGT0106-001A-H_P02-05 16/1/06, 5:48 PM4

5

Preparation

Connecting other external devices

• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect theheadphones, the TV speakers go off.



VIDEO AUDIO

IN

OUT

(VIDEO - 1)

VCR (for recording)

VCR (for playing)

To audio output

To video output

To audio input

To video input

VIDEO AUDIO

MENU CHANNEL

IN

To audio output

To video output

Headphones

Camcorder or TV game

GGT0106-001A-H_P02-05 16/1/06, 5:48 PM5

6

MET ON TIMER POWER

POWER lamp Main power button


POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

VOLUME

MUTING

SOUND

DISPLAYbutton

MENU / buttonsMENU –/+

buttons

CHANNEL

Preparation

4 Connecting the power cordConnect the power cord to the AC outlet.Operate only from the power source indicated on the rear of the TV.

5 SETUP TOURWhen the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo isdisplayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.• In case of resetting that the reason for such as removal, you can set the SETUP TOUR

function on the “MENU 3” menu. For details, see page 13.

1 Press the Main power buttonon the TV.

The POWER lamp or POWER/ONTIMER lamp lights. After the JVClogo has been displayed, the TVautomatically switches to thelanguage setting mode.

SETUP TOUR

EXIT BY OPERATE BY -+ DISPLAY

SETUP TOUR

LANGUAGEENGLISH

NEXT

2 Press the MENU M buttons toselect the on-screen language.

3 Press the MENU y button.

The AUTO PROGRAMMING functionwill start and the indicator blinks.

STOP BY -+

SETUP TOUR

NOW PROGRAMMING

• To stop the AUTO PROGRAMMING function, press the MENU m buttons.When you press stop, it will display “SETUP TOUR THANK YOU!”.

When all the TV channels that can be received on your TV have been preset, thedisplay goes out and the AUTO PROGRAMMING function operation is completed.• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH

PRESET function. For details, see page 14.

• Illustration of AV-21F16

GGT0106-001A-H_P06-09 16/1/06, 5:49 PM6

7

Basic operation

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

CHANNEL VOLUME

MUTING

SOUND


1 Press the POWER button to turnyour TV on.

• If your TV does not turn on, press theMain power button on the TV then pressthe POWER button again.

• You can also turn on your TV by pressingany of the following buttons;- the CHANNEL m button- the Number buttons- the TV/VIDEO button

2 Select a channel.

Press the CHANNEL m button.• Up/down selection cannot be selected

for channels to which the SKIP has beenset to “YES”. See page 15.

Press the Number buttons to enterthe channel number.• If you want to enter a two-digit number,

press the -/-- button to select the twodigit mode “--”, then enter the channelnumber.

3 Press the VOLUME M button toadjust the sound.

4 To turn your TV off, press thePOWER button.

• We recommend that you press the Mainpower button on the TV to turn the mainpower off if you do not plan to use yourTV for a long time or if you wish to saveenergy.

If the picture is not clear:Press the COLOUR SYSTEM button toselect another colour system, see page 8.

If the sound is not clear:Press the SOUND SYSTEM button to selectanother sound system, see page 8.

Viewing Images from an ExternalDevice:Press the TV/VIDEO button to select theVIDEO mode.• You can also use the INPUT function to select

the VIDEO mode. For details, refer to page 11.

GGT0106-001A-H_P06-09 16/1/06, 5:49 PM7

8

Remote control buttons and functions

PICTURE MODE buttonYou can select one of three pictureadjustment settings as you like.

Press this button to select a mode.

BRIGHT:Heightens contrast and sharpness.

STANDARD:Standardizes picture adjustments.

SOFT:Softens contrast and sharpness.• Pressing this button returns all the picture

settings in the “MENU 4” to their defaultsettings.

COLOUR SYSTEM buttonIf the picture is not clear or no colourappears, change the current colour systemto another colour system.

Press this button to select the coloursystem.

In TV mode (channel 1 to 99 and AV):

AUTO PAL SECAM

In VIDEO mode:

AUTO PAL SECAMNTSC3.58NTSC4.43

AUTO:Automatic colour system selection.

• For the colour systems in each country orregion, see the table“Broadcasting systems”on page 19.

• If the picture is not normal in the AUTOmode, change the AUTO mode to anothercolour system.

SOUND SYSTEM buttonIf the sound is not clear even when thepicture appears normal, change thecurrent sound system to another soundsystem.

Press this button to select the soundsystem.

B/G I D/K

• For the sound systems in each country orregion, see the table “Broadcasting systems”on page 19.

• You cannot select any sound system when ina VIDEO mode.

GGT0106-001A-H_P06-09 16/1/06, 5:49 PM8

9


DISPLAY buttonYou can continuously display the currentchannel number or VIDEO mode on thescreen.

Press this button.

To turn the display off, press this buttonagain.

• When selecting a channel or VIDEO modewith no input signal, indication of selectedchannel or VIDEO mode becomes fixed on thescreen.

RETURN + buttonYou can set a channel you frequently viewto the Return Channel and you can viewthat channel at any time with one-touch.

To set the channel to the ReturnChannel:

1 Select the channel you want to setto the Return Channel.

2 Press this button and hold until themessage “RETURN PLUSPROGRAMMED!” appears.

• When you turn off the TV, the ReturnChannel setting is cancelled.

To view the Return Channel:Press this button.• You can view two channels (current channel

and Return Channel) alternately by pressingthis button.

To cancel the Return Channel setting:Press this button and hold until themessage“RETURN PLUS CANCELLED!”appears.

If no channel is set to the ReturnChannel:You can view the channel selected rightbefore the current channel by pressingthis button.

CHANNEL SCAN buttonYou can quickly view all TV channelsprogrammes that you can view on yourTV, and search for the programme youwant to view.

1 Press this button to start scanningTV channels.

The TV channel programmes are eachdisplayed for several seconds.• The programmes of TV channels for which

the SKIP function is set to “YES” are notdisplayed. (See page 15.)

2 When you find the programme youwant to view, press this buttonagain to stop scanning.

MUTING buttonYou can turn the sound off instantly.

Press this button.

To turn the sound on, press this buttonagain.

OFF TIMER buttonYou can set the TV to automatically turnoff after a set time.

Press this button to select the period oftime.

• You can set the period of time to a maximumof 120 minutes in 10 minute increments.

• 1 minute before the OFF TIMER functionturns off the TV, “GOOD NIGHT!” appears.

To display the remaining time, press thisbutton once.

To cancel the OFF TIMER function, pressthis button to set the period of time to 0.

• The OFF TIMER function will not turn off theTV’s main power.

GGT0106-001A-H_P06-09 16/1/06, 5:49 PM9

10

2 Repeatedly press the MENU Tbuttons to display a desiredmenu.

• If you hold down the y button, the nextmenu is displayed.

• If the selected function is on the first line,pressing the r button displays thepreceding menu.

3 Repeatedly press the MENU Tbuttons to select a desiredfunction.

4 Press the MENU M buttons tochange function settings.

Example:

MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON

SELECT BY EXIT BY OPERATE BY -+ DISPLAY

MENU 2 AUTO SHUTOFF ON CHILD LOCK OFF BLUE BACK ON


• With some functions, the operationmethod may differ.

5 Press the DISPLAY button to turnthe display off.

•To operate a menu using the buttons onthe front panel of the TV, refer to“Operating menus” on page 17.

Using the TV’s menus

This TV has a number of functions you can operate using the menus. To use all your TV’sfunctions fully, you need to understand how to use the menus.


POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

VOLUME

MUTING

SOUND

DISPLAYbutton


buttons

CHANNEL

Basic operation

1 Press the MENU T buttons.One of the 4 menus is displayed.

MENU 1 INPUT TV ON TIMER PR 1 0:00 VNR OFF


Changes the AUTOSHUTOFF setting.

MENU number

The icon onthe left indicatesthe currentlyselected function.

GGT0106-001A-H_P10-13 16/1/06, 5:49 PM10

11


ON TIMERYour TV will automatically turn on andtune into the channel you set after theperiod of time you set.

1 Press MENU T to display the“MENU 1” menu, then select“ON TIMER”.


OPERATE BY VOL-+ SELECT BY EXIT BY PROGRAM BY -+ DISPLAY

2 Press MENU M to select a channelyou want to view when the TV turnson.

3 Press VOLUME M to select theperiod of time after which you wantto turn on the TV.

The ON TIMER function starts.

• Each time you press the button, the periodof time changes in 15 minute intervals (upto 12 hours).

To cancel the ON TIMER function,press the VOLUME m button to set theperiod of time to “0:00”.

4 Press DISPLAY to turn the displayoff.

• If you turn off the TV’s main power bypressing the Main power button, the ONTIMER function is canceled.

• If you do not turn off the TV after startingthe ON TIMER function, the channel willautomatically switch to the channel set forthe ON TIMER function.

When the time set for the ON TIMERfunction is reached:

The TV automatically turns on and thechannel set for the ON TIMER function isdisplayed.• For safety reasons the TV will automatically

turn off if no operations are made withinapproximately two hours after the TV isturned on with the ON TIMER function.

• The OFF TIMER function and AUTOSHUTOFF function have priority over the ONTIMER function.

INPUTYou can view images from VCRs or otherdevices connected to your TV.

1 Press MENU T to display the“MENU 1” menu, then select“INPUT”.



2 Press MENU M to select the VIDEOmode.

While you press MENU –/+, it willswitch to TV mode and VIDEO modealternately.

GGT0106-001A-H_P10-13 16/1/06, 5:49 PM11

12


VNR (Video Noise Reduction)You can reduce the picture noise.

1 Press MENU T to display the“MENU 1” menu, then select “VNR”.

MENU 1 INPUT TV ON TIMER PR 1 0:00 VNR ON


2 Press MENU M to select “ON”.

To cancel the VNR function, select“OFF”.

AUTO SHUTOFFYou can set your TV to turn off if nosignals are received for about 15 minutesor longer after the end of a broadcast.

1 Press MENU T to display the“MENU 2” menu, then select “AUTOSHUTOFF”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON



To cancel the AUTO SHUTOFF function,select “OFF”.• The AUTO SHUTOFF function does not

turn off the TV’s main power.• The AUTO SHUTOFF will not work for a

VIDEO mode.

CHILD LOCKYou can disable the front control buttonsof the TV.When this function is set to “ON”, the TVcan be operated using only the remotecontrol.Use this function to prevent children fromoperating the TV without parental consent.

1 Press MENU T to display the“MENU 2” menu, then select “CHILDLOCK”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON SELECT BY EXIT BY OPERATE BY -+ DISPLAY


To cancel the CHILD LOCK function,select “OFF”.

• The CHILD LOCK function is canceled whenyou turn the power off.

BLUE BACKYou can mute the sound and change thepicture into a blue screen while no signalsare received by the TV, or when thesignals are unstable.

1 Press MENU T to display the“MENU 2” menu, then select “BLUEBACK”.




To cancel the BLUE BACK function,select “OFF”.• To view a broadcast even when the

reception signal is poor, set the BLUEBACK function to “OFF”.

• Even when the BLUE BACK function is setto “OFF”, the sound may not be audible.

GGT0106-001A-H_P10-13 16/1/06, 5:49 PM12

13


SETUP TOURYou can start the SETUP TOUR function.

1 Press MENU T to display the“MENU 3” menu, then select“SETUP TOUR”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press MENU M.

JVC logo is appear and the SETUPTOUR function will start.For details, see page 6.

LANGUAGEYou can select the language for the on-screen display.

1 Press MENU T to display the“MENU 3” menu, then select“LANGUAGE”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH


2 Press MENU M to selectlanguage.

The on-screen display indications arein the selected language.

AUTO CH PRESETYou can automatically preset all TVchannels that can be received by your TVto channels.

1 Press MENU T to display the“MENU 3” menu, then select “AUTOCH PRESET”.



2 Press MENU M to start the AUTOCH PRESET function.

“>>>ON SEARCH” is displayed onthe screen.When all the TV channels that can bereceived on your TV have been preset,the display goes out and the AUTO CHPRESET function operation iscompleted.

To stop the AUTO CH PRESET:Press the MENU m buttons.

• The AUTO CH PRESET function does notpreset a TV channel to the AV channel(channel number 0).

• If the TV cannot preset the TV channel youwant to view, preset it manually. For details,see “MANUAL CH PRESET” on page 14.

GGT0106-001A-H_P10-13 16/1/06, 5:49 PM13

14


MANUAL CH PRESETYou can manually preset desired TVchannels to desired channels.

1 Press MENU T to display the“MENU 3” menu, then select“MANUAL CH PRESET”.



2 Press MENU M.

The sub-menu is displayed.

MANUAL FINE SKIP NO SOUND SYSTEM B/G EXIT

SELECT BY PR 1 VLPROGRAM BY -+ EXIT BYSEARCH BY VOL-+ DISPLAY

• The channel number is displayed as a PRnumber. For example, channel 1 will bedisplayed as PR 1. However, the AVchannel will be displayed as AV.

3 Press MENU M to select thechannel number.

4 Press VOLUME M to startsearching for the TV channel.

“>>>” or “<<<” is displayed on thescreen.When the TV finds a TV channel, the“>>>” or “<<<” display goes out,and the TV channel is preset to thecurrently selected channel number.• If the TV channel you want to preset is not

displayed, repeat step 4 until the TV findsthe TV channel you want to preset.

• To stop the MANUAL CH PRESET function,press any button other than the VOLUMEm button.

If the picture is not clear:Fine-tune the TV channel.

1 Press MENU t to select “FINE”.


SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYFINE BY VOL-+ DISPLAY

2 Hold VOLUME m down to fine-tunethe TV channel so that the best imageis displayed on screen.

“>” or “<” indicates that the TV is fine-tuning the TV channel.

If the sound is not clear:

1 Press MENU t to select “SOUNDSYSTEM”.


SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYCHANGE BY VOL-+ DISPLAY

2 Press VOLUME m to select theappropriate sound system.

• For the sound systems in each countryor region, refer to the table“Broadcasting systems” on page 19.

5 Press MENU T to select“MANUAL”.

6 Repeat steps 3 to 5 if you want topreset another TV channel to achannel.

GGT0106-001A-H_P14-17 16/1/06, 5:49 PM14

15


SKIPYou can set undesired channels to beskipped. Channels set to be skippedcannot be selected by the CHANNEL mbuttons nor the CHANNEL SCAN button.• Channels to which TV channels have not

been preset are automatically set to beskipped.


2 Press MENU M.


3 Press MENU T to select “SKIP”.


SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYYES/NO BY VOL-+ DISPLAY

4 Press MENU M to select thechannel you want to skip.

5 Press VOLUME M to select “YES”.

The channel is set to be skipped.To cancel the SKIP function, select“NO”.

6 Repeat steps 4 and 5 if you want toset another channel to skip.

Picture AdjustmentsYou can adjust the picture as you like.

1 Press MENU T to display the“MENU 4” menu.

MENU 4TINTCOLOURBRIGHTCONT.SHARP

SELECT BY EXIT BYOPERATE BY -+ DISPLAY

2 Press MENU T to select an itemand press MENU M to adjust it.

TINT* - : Reddish + : GreenishCOLOUR - : Lighter + : DeeperBRIGHT - : Darker + : BrighterCONT. - : Lower + : HigherSHARP - : Softer + : Sharper

* TINT (tint) is displayed only whenviewing images from NTSC3.58 orNTSC4.43 colour systems.

GGT0106-001A-H_P14-17 16/1/06, 5:49 PM15

16

Using the buttons on the TV

1 MENU button• MENU button

2 CHANNEL m buttons• MENU m buttons

3 VOLUME m buttons• EXIT from MENU buttons

4 Remote control sensor5 ON TIMER lamp

The light is switched onwhile ON TIMER functionis operating.

6 POWER lampWhen the Main power ison, the light is red.

7 POWER/ON TIMER lampWhen the Main power ison, the light is green.When ON TIMER functionis on, it is red.

8 Main power button

<AV-14A16>

<AV-21T16>

<AV-21F16>

MENU CHANNEL VOLUME

EXIT

POWER /ON TIMER

1 2 3 7 84

MENU CHANNEL VOLUMEEXIT ON TIMER POWER

1 2 3 4 5 6 8

MENU CHANNEL VOLUME

EXIT

POWER /ON TIMER

1 2 3 4 7 8

<AV-21B16>

MENU CHANNEL VOLUME

ON

POWER

TIMER

EXIT

1 2 3 4 7 8

GGT0106-001A-H_P14-17 16/1/06, 5:49 PM16

17


Basic operation• Check to make sure the CHILD LOCK

function is set to “OFF”. When the CHILDLOCK function is set to “ON”, the TV cannotbe operated using the front control buttons.For details, see “CHILD LOCK” on page 12.

1 Press CHANNEL M to turn the TVon from standby mode.

2 Press CHANNEL M to select achannel.

3 Press VOLUME M to adjust thevolume.

4 To turn your TV off, press the Mainpower button to turn off the TV’smain power.

To change the TV mode to the VIDEOmode:• Select the VIDEO mode with the INPUT

function in “MENU 1”.

Operating menus

You can operate functions in menus usingthe front control buttons on the TV.

1 Press MENU y to display a menu.

2 Press MENU y repeatedly to displaythe menu you want to use.

3 Press MENU y to select the desiredfunction or item.

4 Press MENU M or VOLUME M tocarry out the desired operation.

For details, see the description for eachfunction.

5 Press VOLUME M to turn the menudisplay off.

To turn the sub-menu display off:

1 Press MENU y to select “EXIT”.


SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYEXIT BY VOL-+ DISPLAY

2 Press VOLUME m to turn the displayoff.

GGT0106-001A-H_P14-17 16/1/06, 5:49 PM17

18

Troubleshooting

If there is no picture or the TV does not operate normally, make sure the problem isn’t dueto the reasons indicated below.If the problem persists even after taking the measures indicated, please contact a servicetechnician.

Poor picture

• Press the COLOUR SYSTEM button to selectanother colour system. (see page 8.)

• Adjust the picture settings. (see page 15.)• Set the Picture mode to STANDARD.

(see page 8.)• If noise (snow) totally blocks out the picture,

check the following.- Have the TV and aerial been connectedproperly?

- Has the aerial cable been damaged?- Is the aerial pointing in the right direction?- Is the aerial itself faulty?

• If the TV or aerial suffer interference fromother equipment, stripes or noise may appearin the picture. Move any equipment whichcan cause interference away from the TV.

• If the TV or aerial suffer interference fromsignals reflecting from mountains orbuildings, double-pictures (ghosting) willoccur. Change the aerial’s direction or replaceit with an aerial with better directionality.

• When a white and bright still image (such asa white dress) is displayed on the screen, thewhite part may look as if it is coloured. Whenthe image disappears from the screen, theunnatural colours will also disappear.

The TV turns on suddenly

• Is the ON TIMER function set to operate?(see page 11.)

The TV channel changes suddenly


Cannot turn the TV on

• Press the Main power button on the TV.• Connect the power cord to the AC outlet.

The screen turns blue

• Is the BLUE BACK function on? (see page 12.)

Remote control inoperable

• Replace the batteries. (see page 3.)

Buttons on front of the TV do not work

• Switch the CHILD LOCK function off.(see page 12.)

TV does not respond immediately

• Press the main power button on the TV toturn off the main power. Press the mainpower button again to turn on the TV. If theTV returns to a normal state, operation isnormal.

The TV turns off suddenly

• Is the OFF TIMER function set to operate?(see page 9.)

• Is the AUTO SHUTOFF function on?(see page 12.)

• Have you not performed an operation forabout two hours after the TV was switched onby the ON TIMER function? (see page 11.) Ifyou don’t perform an operation within abouttwo hours, the TV is automatically switchedoff for safety.

Poor sound

• Press the SOUND SYSTEM button to selectanother sound system. (see page 8.)

GGT0106-001A-H_P18-19 16/1/06, 5:49 PM18

19

Asia,Middle

East

SpecificationsTV RF systems

B, G, I, D, K, K1

Colour systems

PAL, SECAM, NTSC 3.58 MHz/NTSC 4.43 MHz (in VIDEO mode only)

Receiving channels

VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid band, super band and hyper band.

External input / output

INPUT: VIDEO input (RCA), AUDIO input (RCA)OUTPUT: VIDEO output (RCA), AUDIO output (RCA)Headphone jack: stereo mini jack (3.5 mm diameter)

Accessories

• Remote control unit: RM-C360GY• AA / R6 / UM-3 dry cell battery × 2

Design and specifications subject to change without notice.

Broadcasting systems

Area Country or RegionSystem

Colour SoundBahrain, Kuwait, Oman, Qatar,United Arab Emirates, Yemen, etc. PAL B/GIndonesia, Malaysia, Singapore, Thailand,India, etc.

China, Vietnam, etc. PAL D/K

Hong Kong, etc. PAL I

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM B/G

Philipins, Taiwan, Myanmar, etc. NTSC M

Russia, etc. SECAM D/K

EuropeCzech Republic, Poland, etc. PAL D/K

Germany, Holland, Belgium, etc. PAL B/G

UK, etc. PAL I

Oceania Australia, New Zealand, etc. PAL B/G

Republic of South Africa, etc. PAL I

Africa Nigeria, etc. PAL B/G

Egypt, Morocco, etc. SECAM B/G

GGT0106-001A-H_P18-19 16/1/06, 5:50 PM19

GGT0106-001A-H_Cover 16/1/06, 5:48 PM2

GGT0109-001A-H0206-NIC-JMT © 2006 Victor Company of Japan, Limited

COLOUR TELEVISION

INSTRUCTIONSThank you for buying this JVCcolour television.To make sure you understand how touse your new TV, please read thismanual thoroughly before you begin.

AV-14AG16AV-14FMG6BAV-21BMG6AV-21CG16AV-21DMG6AV-21FMG6AV-21FMG6BAV-21TG16AV-21YMG6

Contents

Safety precautions 2Preparation 3

1 Confirm which remote control you have ...... 32 Inserting the batteries ................................... 33 Connecting the aerial and external devices ... 44 Connecting the power cord ........................ 65 SETUP TOUR .............................................. 6

Basic operation 7Remote control buttons and functions 8

PICTURE MODE button ................................. 8COLOUR SYSTEM button ............................. 8SOUND SYSTEM button ............................... 8DISPLAY button ............................................. 9RETURN + button .......................................... 9CHANNEL SCAN button ................................ 9MUTING button ............................................. 9OFF TIMER button ......................................... 9

Using the TV’s menus 10Basic operation ............................................ 10ON TIMER ..................................................... 11INPUT ........................................................... 11VNR ............................................................... 12AUTO SHUTOFF .......................................... 12CHILD LOCK ................................................. 12BLUE BACK .................................................. 12SETUP TOUR ............................................... 13LANGUAGE .................................................. 13AUTO CH PRESET ....................................... 13MANUAL CH PRESET .................................. 14SKIP .............................................................. 15Picture Adjustments .................................... 15

Using the buttons on the TV 16Troubleshooting 18Specifications 19

GGT0109-001A-H_Cover 1/13/06, 2:38 PM3

2

Safety precautions

WARNING• To prevent fire or shock hazard, do not expose the TV to rain or moisture.

CAUTION•Operate only from the power source indicated on the rear of the TV.•Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by

the mains plug. Do not pull on the power cord.•Never block or cover the cabinet openings for

ventilation. Never install the TV where goodventilation is unattainable. When installingthis TV, leave spaces for ventilation aroundthe TV more than the minimum distancesshown in the diagram.

•Do not allow objects or liquid into thecabinet openings.

• In the event of a fault, unplug the TV and call a service technician. Do not attempt torepair it by yourself or remove the rear cover.

•The surface of the TV screen is easily damaged. Be very careful with it when handlingthe TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub itforcefully. Never use any cleaner or detergent on it.

•This TV can be turned on/ off power by connecting/ disconnecting the AC Plug into ACoutlet. While this TV is being installed, enough space should be reserved for connecting/disconnecting the AC Plug into AC outlet by hand.

15 cm

10 cm 15 cm10 cm

GGT0109-001A-H_P02-05 1/18/06, 9:502

Black

3

Preparation

1 Confirm which remote control you have

RM-C360GY

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

VOLUME

MUTING

SOUND

CHANNEL

REMOTE CONTROL UNIT

PICTUREMODE

RM-C360GY

2 Inserting the batteriesCorrectly insert two batteries, observing the , and. polarities and inserting the . end first.

CAUTION:Follow the cautions printed on the batteries.

Notes:• Use AA/R6/UM-3 dry cell batteries.• If the remote control does not work properly, fit new

batteries.The supplied batteries are for testing, not regular use.

GGT0109-001A-H_P02-05 1/13/06, 2:38 PM3

4

Preparation

3 Connecting the aerial and external devices• For further details, refer to the manuals provided with the devices you are connecting.• Connecting cables are not supplied.• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack

is output through both. You cannot provide input to both the front and rear jacks at the sametime. Disconnect one input, or use one of the jacks as an output jack only (for monitoring orrecording).


Connecting the aerial

• Illustration of AV-14FMG6B.


VIDEO AUDIO

IN

OUT

To RF output

To video output

To aerial input

To audio output

3

2

VCR


1

VIDEO AUDIO

IN

OUT



GGT0109-001A-H_P02-05 1/13/06, 2:38 PM4

5

Preparation

Connecting other external devices

• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect theheadphones, the TV speakers go off.


VIDEO AUDIO

IN

OUT VCR (for recording)

VCR (for playing)

To audio output

To video output

To audio input

To video input

• Illustration of AV-21TG16.


MENUVIDEO AUDIO

IN

MENU

VIDEO AUDIOIN

To audio output

To video output

To audio output

To video output

Headphones Headphones

Camcorder or TV game

GGT0109-001A-H_P02-05 1/13/06, 2:38 PM5

6

Preparation

4 Connecting the power cordConnect the power cord to the AC outlet.Operate only from the power source indicated on the rear of the TV.

5 SETUP TOURWhen the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo isdisplayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.•In case of resetting that the reason for such as removal, you can set the SETUP TOUR

function on the “MENU 3” menu. For details, see page 13.

1 Press the Main power buttonon the TV.

The POWER lamp or POWER/ONTIMER lamp lights. After the JVClogo has been displayed, the TVautomatically switches to thelanguage setting mode.

SETUP TOUR

EXIT BY OPERATE BY -+ DISPLAY

SETUP TOUR

LANGUAGEENGLISH

NEXT

2 Press the MENU M buttons toselect the on-screen language.

3 Press the MENU y button.

The AUTO PROGRAMMING functionwill start and the indicator blinks.

STOP BY -+

SETUP TOUR

NOW PROGRAMMING

• To stop the AUTO PROGRAMMING function, press the MENU m buttons.When you press stop, it will display “SETUP TOUR THANK YOU!”.

When all the TV channels that can be received on your TV have been preset, thedisplay goes out and the AUTO PROGRAMMING function operation is completed.• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH

PRESET function. For details, see page 14.

POWER lamp Main power button

POWERON TIMER

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

VOLUME

MUTING

SOUND

DISPLAYbutton


buttons

CHANNEL

REMOTE CONRTOL UNITRM-C360GY

• Illustration of AV-21FMG6

GGT0109-001A-H_P06-09 1/13/06, 2:38 PM6

7

Basic operation

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

CHANNEL

REMOTE CONTROL UNIT

VOLUME

MUTING

SOUND

RM-C360GY

1 Press the POWER button to turnyour TV on.

• If your TV does not turn on, press theMain power button on the TV then pressthe POWER button again.

• You can also turn on your TV by pressingany of the following buttons;- the CHANNEL m button- the Number buttons- the TV/VIDEO button

2 Select a channel.

Press the CHANNEL m button.• Up/down selection cannot be selected

for channels to which the SKIP has beenset to “YES”. See page 15.

Press the Number buttons to enterthe channel number.• If you want to enter a two-digit number,

press the -/-- button to select the twodigit mode “--”, then enter the channelnumber.

3 Press the VOLUME M button toadjust the sound.

4 To turn your TV off, press thePOWER button.

• We recommend that you press the Mainpower button on the TV to turn the mainpower off if you do not plan to use yourTV for a long time or if you wish to saveenergy.

If the picture is not clear:Press the COLOUR SYSTEM button toselect another colour system, see page 8.

If the sound is not clear:Press the SOUND SYSTEM button to selectanother sound system, see page 8.

Viewing Images from an ExternalDevice:Press the TV/VIDEO button to select theVIDEO mode.• You can also use the INPUT function to select

the VIDEO mode. For details, refer to page 11.

GGT0109-001A-H_P06-09 1/13/06, 2:38 PM7

8


PICTURE MODE buttonYou can select one of three pictureadjustment settings as you like.

Press this button to select a mode.

BRIGHT:Heightens contrast and sharpness.

STANDARD:Standardizes picture adjustments.

SOFT:Softens contrast and sharpness.• Pressing this button returns all the picture

settings in the “MENU 4” to their defaultsettings.

COLOUR SYSTEM buttonIf the picture is not clear or no colourappears, change the current colour systemto another colour system.

Press this button to select the coloursystem.

In TV mode (channel 1 to 99 and AV):


In VIDEO mode:


AUTO:Automatic colour system selection.

• For the colour systems in each country orregion, see the table“Broadcasting systems”on page 19.

• If the picture is not normal in the AUTOmode, change the AUTO mode to anothercolour system.

SOUND SYSTEM buttonIf the sound is not clear even when thepicture appears normal, change thecurrent sound system to another soundsystem.

Press this button to select the soundsystem.

B/G I D/K M

• For the sound systems in each country orregion, see the table “Broadcasting systems”on page 19.

• You cannot select any sound system when ina VIDEO mode.

GGT0109-001A-H_P06-09 1/13/06, 2:38 PM8

9


DISPLAY buttonYou can continuously display the currentchannel number or VIDEO mode on thescreen.

Press this button.

To turn the display off, press this buttonagain.

• When selecting a channel or VIDEO modewith no input signal, indication of selectedchannel or VIDEO mode becomes fixed on thescreen.

RETURN + buttonYou can set a channel you frequently viewto the Return Channel and you can viewthat channel at any time with one-touch.

To set the channel to the ReturnChannel:

1 Select the channel you want to setto the Return Channel.

2 Press this button and hold until themessage “RETURN PLUSPROGRAMMED!” appears.

• When you turn off the TV, the ReturnChannel setting is cancelled.

To view the Return Channel:Press this button.• You can view two channels (current channel

and Return Channel) alternately by pressingthis button.

To cancel the Return Channel setting:Press this button and hold until themessage“RETURN PLUS CANCELLED!”appears.

If no channel is set to the ReturnChannel:You can view the channel selected rightbefore the current channel by pressingthis button.

CHANNEL SCAN buttonYou can quickly view all TV channelsprogrammes that you can view on yourTV, and search for the programme youwant to view.

1 Press this button to start scanningTV channels.

The TV channel programmes are eachdisplayed for several seconds.• The programmes of TV channels for which

the SKIP function is set to “YES” are notdisplayed. (See page 15.)

2 When you find the programme youwant to view, press this buttonagain to stop scanning.

MUTING buttonYou can turn the sound off instantly.

Press this button.

To turn the sound on, press this buttonagain.

OFF TIMER buttonYou can set the TV to automatically turnoff after a set time.

Press this button to select the period oftime.

• You can set the period of time to a maximumof 120 minutes in 10 minute increments.

• 1 minute before the OFF TIMER functionturns off the TV, “GOOD NIGHT!” appears.

To display the remaining time, press thisbutton once.

To cancel the OFF TIMER function, pressthis button to set the period of time to 0.

• The OFF TIMER function will not turn off theTV’s main power.

GGT0109-001A-H_P06-09 1/13/06, 2:38 PM9

10

2 Repeatedly press the MENU Tbuttons to display a desiredmenu.

• If you hold down the y button, the nextmenu is displayed.

• If the selected function is on the first line,pressing the r button displays thepreceding menu.

3 Repeatedly press the MENU Tbuttons to select a desiredfunction.

4 Press the MENU M buttons tochange function settings.

Example:

MENU 2 AUTO SHUTOFF OFF CHILD LOCK OFF BLUE BACK ON


MENU 2 AUTO SHUTOFF ON CHILD LOCK OFF BLUE BACK ON


• With some functions, the operationmethod may differ.

5 Press the DISPLAY button to turnthe display off.

•To operate a menu using the buttons onthe front panel of the TV, refer to“Operating menus” on page 17.


This TV has a number of functions you can operate using the menus. To use all your TV’sfunctions fully, you need to understand how to use the menus.

POWER

1 2 3

4 5 6

7 8 9

RETURN+ 0 -/--

PICTUREMODE

SYSTEMCOLOUR

TV/VIDEO

CHANNELSCAN

OFFTIMER

DISPLAY

MENU

VOLUME

MUTING

SOUND

DISPLAYbutton


buttons

CHANNEL

REMOTE CONRTOL UNITRM-C360GY

Basic operation

1 Press the MENU T buttons.One of the 4 menus is displayed.



Changes the AUTOSHUTOFF setting.

MENU number

The icon onthe left indicatesthe currentlyselected function.

GGT0109-001A-H_P10-13 1/13/06, 2:38 PM10

11


ON TIMERYour TV will automatically turn on andtune into the channel you set after theperiod of time you set.

1 Press MENU T to display the“MENU 1” menu, then select“ON TIMER”.


OPERATE BY VOL-+ SELECT BY EXIT BY PROGRAM BY -+ DISPLAY

2 Press MENU M to select a channelyou want to view when the TV turnson.

3 Press VOLUME M to select theperiod of time after which you wantto turn on the TV.

The ON TIMER function starts.

• Each time you press the button, the periodof time changes in 15 minute intervals (upto 12 hours).

To cancel the ON TIMER function,press the VOLUME m button to set theperiod of time to “0:00”.

4 Press DISPLAY to turn the displayoff.

• If you turn off the TV’s main power bypressing the Main power button, the ONTIMER function is canceled.

• If you do not turn off the TV after startingthe ON TIMER function, the channel willautomatically switch to the channel set forthe ON TIMER function.

When the time set for the ON TIMERfunction is reached:

The TV automatically turns on and thechannel set for the ON TIMER function isdisplayed.• For safety reasons the TV will automatically

turn off if no operations are made withinapproximately two hours after the TV isturned on with the ON TIMER function.

• The OFF TIMER function and AUTOSHUTOFF function have priority over the ONTIMER function.

INPUTYou can view images from VCRs or otherdevices connected to your TV.

1 Press MENU T to display the“MENU 1” menu, then select“INPUT”.



2 Press MENU M to select the VIDEOmode.

While you press MENU –/+, it willswitch to TV mode and VIDEO modealternately.

GGT0109-001A-H_P10-13 1/13/06, 2:38 PM11

12


VNR (Video Noise Reduction)You can reduce the picture noise.

1 Press MENU T to display the“MENU 1” menu, then select “VNR”.

MENU 1 INPUT TV ON TIMER PR 1 0:00 VNR ON



To cancel the VNR function, select“OFF”.

AUTO SHUTOFFYou can set your TV to turn off if nosignals are received for about 15 minutesor longer after the end of a broadcast.

1 Press MENU T to display the“MENU 2” menu, then select “AUTOSHUTOFF”.




To cancel the AUTO SHUTOFF function,select “OFF”.• The AUTO SHUTOFF function does not

turn off the TV’s main power.• The AUTO SHUTOFF will not work for a

VIDEO mode.

CHILD LOCKYou can disable the front control buttonsof the TV.When this function is set to “ON”, the TVcan be operated using only the remotecontrol.Use this function to prevent children fromoperating the TV without parental consent.

1 Press MENU T to display the“MENU 2” menu, then select “CHILDLOCK”.

MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON SELECT BY EXIT BY OPERATE BY -+ DISPLAY


To cancel the CHILD LOCK function,select “OFF”.

• The CHILD LOCK function is canceled whenyou turn the power off.

BLUE BACKYou can mute the sound and change thepicture into a blue screen while no signalsare received by the TV, or when thesignals are unstable.

1 Press MENU T to display the“MENU 2” menu, then select “BLUEBACK”.




To cancel the BLUE BACK function,select “OFF”.• To view a broadcast even when the

reception signal is poor, set the BLUEBACK function to “OFF”.

• Even when the BLUE BACK function is setto “OFF”, the sound may not be audible.

GGT0109-001A-H_P10-13 1/13/06, 2:38 PM12

13


SETUP TOURYou can start the SETUP TOUR function.

1 Press MENU T to display the“MENU 3” menu, then select“SETUP TOUR”.

MENU 3 AUTO CH PRESET MANUAL CH PRESET SETUP TOUR LANGUAGE ENGLISH SELECT BY EXIT BY OPERATE BY -+ DISPLAY

2 Press MENU M.

JVC logo is appear and the SETUPTOUR function will start.For details, see page 6.

LANGUAGEYou can select the language for the on-screen display.

1 Press MENU T to display the“MENU 3” menu, then select“LANGUAGE”.



2 Press MENU M to selectlanguage.

The on-screen display indications arein the selected language.

AUTO CH PRESETYou can automatically preset all TVchannels that can be received by your TVto channels.

1 Press MENU T to display the“MENU 3” menu, then select “AUTOCH PRESET”.



2 Press MENU M to start the AUTOCH PRESET function.

“>>>ON SEARCH” is displayed onthe screen.When all the TV channels that can bereceived on your TV have been preset,the display goes out and the AUTO CHPRESET function operation iscompleted.

To stop the AUTO CH PRESET:Press the MENU m buttons.

• The AUTO CH PRESET function does notpreset a TV channel to the AV channel(channel number 0).

• If the TV cannot preset the TV channel youwant to view, preset it manually. For details,see “MANUAL CH PRESET” on page 14.

GGT0109-001A-H_P10-13 1/13/06, 2:38 PM13

14


MANUAL CH PRESETYou can manually preset desired TVchannels to desired channels.




2 Press MENU M.



SELECT BY PR 1 VLPROGRAM BY -+ EXIT BYSEARCH BY VOL-+ DISPLAY

• The channel number is displayed as a PRnumber. For example, channel 1 will bedisplayed as PR 1. However, the AVchannel will be displayed as AV.

3 Press MENU M to select thechannel number.

4 Press VOLUME M to startsearching for the TV channel.

“>>>” or “<<<” is displayed on thescreen.When the TV finds a TV channel, the“>>>” or “<<<” display goes out,and the TV channel is preset to thecurrently selected channel number.• If the TV channel you want to preset is not

displayed, repeat step 4 until the TV findsthe TV channel you want to preset.

• To stop the MANUAL CH PRESET function,press any button other than the VOLUMEm button.

If the picture is not clear:Fine-tune the TV channel.

1 Press MENU t to select “FINE”.


SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYFINE BY VOL-+ DISPLAY

2 Hold VOLUME m down to fine-tunethe TV channel so that the best imageis displayed on screen.

“>” or “<” indicates that the TV is fine-tuning the TV channel.

If the sound is not clear:

1 Press MENU t to select “SOUNDSYSTEM”.

MANUAL FINE SKIP NO SOUND SYSTEM M EXIT

SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYCHANGE BY VOL-+ DISPLAY

2 Press VOLUME m to select theappropriate sound system.

• For the sound systems in each countryor region, refer to the table“Broadcasting systems” on page 19.

5 Press MENU T to select“MANUAL”.

6 Repeat steps 3 to 5 if you want topreset another TV channel to achannel.

GGT0109-001A-H_P14-17 1/13/06, 2:38 PM14

15


SKIPYou can set undesired channels to beskipped. Channels set to be skippedcannot be selected by the CHANNEL mbuttons nor the CHANNEL SCAN button.• Channels to which TV channels have not

been preset are automatically set to beskipped.


2 Press MENU M.


3 Press MENU T to select “SKIP”.


SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYYES/NO BY VOL-+ DISPLAY

4 Press MENU M to select thechannel you want to skip.

5 Press VOLUME M to select “YES”.

The channel is set to be skipped.To cancel the SKIP function, select“NO”.

6 Repeat steps 4 and 5 if you want toset another channel to skip.

Picture AdjustmentsYou can adjust the picture as you like.

1 Press MENU T to display the“MENU 4” menu.

MENU 4TINTCOLOURBRIGHTCONT.SHARP

SELECT BY EXIT BYOPERATE BY -+ DISPLAY

2 Press MENU T to select an itemand press MENU M to adjust it.

TINT* - : Reddish + : GreenishCOLOUR - : Lighter + : DeeperBRIGHT - : Darker + : BrighterCONT. - : Lower + : HigherSHARP - : Softer + : Sharper

* TINT (tint) is displayed only whenviewing images from NTSC3.58 orNTSC4.43 colour systems.

GGT0109-001A-H_P14-17 1/13/06, 2:38 PM15

16


1 MENU button• MENU button

2 CHANNEL m buttons• MENU m buttons

3 VOLUME m buttons• EXIT from MENU buttons

4 Remote control sensor5 ON TIMER lamp

The light is switched onwhile ON TIMER functionis operating.

6 POWER lampWhen the Main power ison, the light is red.

7 POWER/ON TIMER lampWhen the Main power ison, the light is green.When ON TIMER functionis on, it is red.

8 Main power button

<AV-14AG16>

MENU CHANNEL VOLUMEEXIT ON TIMER POWER

1 2 3 4 5 6 8

MENU CHANNEL VOLUMEEXIT

ON TIMER POWER

1 2 3 4 5 6 8

<AV-21FMG6, AV21FMG6B>

<AV-21YMG6>

MENU CHANNEL VOLUME

EXIT

POWER /ON TIMER

1 2 3 7 84

<AV-21TG16>

MENU CHANNEL VOLUME

EXIT

POWER /ON TIMER

1 2 3 4 7 8

<AV-21BMG6>

The following illustrations are of only some models are shown for explanation purposeonly. Your TV may not be exactly the same as illustrated.

MENU CHANNEL VOLUME

ON

POWER

TIMER

EXIT

1 2 3 4 7 8

GGT0109-001A-H_P14-17 1/13/06, 2:38 PM16

17


Basic operation• Check to make sure the CHILD LOCK

function is set to “OFF”. When the CHILDLOCK function is set to “ON”, the TV cannotbe operated using the front control buttons.For details, see “CHILD LOCK” on page 12.

1 Press CHANNEL M to turn the TVon from standby mode.

2 Press CHANNEL M to select achannel.

3 Press VOLUME M to adjust thevolume.

4 To turn your TV off, press the Mainpower button to turn off the TV’smain power.

To change the TV mode to the VIDEOmode:• Select the VIDEO mode with the INPUT

function in “MENU 1”.

Operating menus

You can operate functions in menus usingthe front control buttons on the TV.

1 Press MENU y to display a menu.

2 Press MENU y repeatedly to displaythe menu you want to use.

3 Press MENU y to select the desiredfunction or item.

4 Press MENU M or VOLUME M tocarry out the desired operation.

For details, see the description for eachfunction.

5 Press VOLUME M to turn the menudisplay off.

To turn the sub-menu display off:

1 Press MENU y to select “EXIT”.


SELECT BY PR 3 VLPROGRAM BY -+ EXIT BYEXIT BY VOL-+ DISPLAY

2 Press VOLUME m to turn the displayoff.

GGT0109-001A-H_P14-17 1/13/06, 2:38 PM17

18

Troubleshooting

If there is no picture or the TV does not operate normally, make sure the problem isn’t dueto the reasons indicated below.If the problem persists even after taking the measures indicated, please contact a servicetechnician.

Poor picture

• Press the COLOUR SYSTEM button to selectanother colour system. (see page 8.)

• Adjust the picture settings. (see page 15.)• Set the Picture mode to STANDARD.

(see page 8.)• If noise (snow) totally blocks out the picture,

check the following.- Have the TV and aerial been connectedproperly?

- Has the aerial cable been damaged?- Is the aerial pointing in the right direction?- Is the aerial itself faulty?

• If the TV or aerial suffer interference fromother equipment, stripes or noise may appearin the picture. Move any equipment whichcan cause interference away from the TV.

• If the TV or aerial suffer interference fromsignals reflecting from mountains orbuildings, double-pictures (ghosting) willoccur. Change the aerial’s direction or replaceit with an aerial with better directionality.

• When a white and bright still image (such asa white dress) is displayed on the screen, thewhite part may look as if it is coloured. Whenthe image disappears from the screen, theunnatural colours will also disappear.

The TV turns on suddenly


The TV channel changes suddenly


Cannot turn the TV on

• Press the Main power button on the TV.• Connect the power cord to the AC outlet.

The screen turns blue

• Is the BLUE BACK function on? (see page 12.)

Remote control inoperable

• Replace the batteries. (see page 3.)

Buttons on front of the TV do not work

• Switch the CHILD LOCK function off.(see page 12.)

TV does not respond immediately

• Press the main power button on the TV toturn off the main power. Press the mainpower button again to turn on the TV. If theTV returns to a normal state, operation isnormal.

The TV turns off suddenly

• Is the OFF TIMER function set to operate?(see page 9.)

• Is the AUTO SHUTOFF function on?(see page 12.)

• Have you not performed an operation forabout two hours after the TV was switched onby the ON TIMER function? (see page 11.) Ifyou don’t perform an operation within abouttwo hours, the TV is automatically switchedoff for safety.

Poor sound

• Press the SOUND SYSTEM button to selectanother sound system. (see page 8.)

GGT0109-001A-H_P18-19 1/13/06, 2:38 PM18

19

Asia,Middle

East

SpecificationsTV RF systems

B, G, I, D, K, K1, M

Colour systems

PAL, SECAM, NTSC 3.58 MHz/NTSC 4.43 MHz

Receiving channels

VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid band, super band and hyper band.

External input / output

INPUT: VIDEO input (RCA), AUDIO input (RCA)OUTPUT: VIDEO output (RCA), AUDIO output (RCA)Headphone jack: stereo mini jack (3.5 mm diameter)

Accessories

• Remote control unit: RM-C360GY• AA / R6 / UM-3 dry cell battery × 2

Design and specifications subject to change without notice.

Broadcasting systems

Area Country or RegionSystem

Colour SoundBahrain, Kuwait, Oman, Qatar,United Arab Emirates, Yemen, etc. PAL B/GIndonesia, Malaysia, Singapore, Thailand,India, etc.

China, Vietnam, etc. PAL D/K

Hong Kong, etc. PAL I

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM B/G

Philipins, Taiwan, Myanmar, etc. NTSC M

Russia, etc. SECAM D/K

EuropeCzech Republic, Poland, etc. PAL D/K

Germany, Holland, Belgium, etc. PAL B/G

UK, etc. PAL I

Oceania Australia, New Zealand, etc. PAL B/G

Republic of South Africa, etc. PAL I

Africa Nigeria, etc. PAL B/G

Egypt, Morocco, etc. SECAM B/G

GGT0109-001A-H_P18-19 1/13/06, 2:38 PM19

GGT0109-001A-H_Cover 1/13/06, 2:38 PM2

SCHEMATIC DIAGRAMS

COPYRIGHT © 2006 Victor Company of Japan, Limited No.YA3912006/4

COLOUR TELEVISIONYA39120064

AV-14A16, AV-14A16/A,AV-14A16/L, AV-14FMG6B/G

BASIC CHASSIS

CG4

AV-14A16AV-14A16/AAV-14A16/L

AV-14FMG6B/G

CD-ROM No.SML200604

5.NOTE FOR REPAIRING SERVICEThis model's power circuit is partly different in the GND. Thedifference of the GND is shown by the LIVE : ( ) side GND and theISOLATED(NEUTRAL) : ( ) side GND. Therefore, care must betaken for the following points.

(1)Do not touch the LIVE side GND or the LIVE side GND and the ISOLATED(NEUTRAL) side GND simultaneously. if the above caution is not respected, an electric shock may be caused. Therefore, make sure that the power cord is surely removed from the receptacle when, for example, the chassis is pulled out.

(2)Do not short between the LIVE side GND and ISOLATED(NEUTRAL) side GND or never measure with a measuring apparatus measure with a measuring apparatus ( oscilloscope, etc.) the LIVE side GND and ISOLATED(NEUTRAL) side GND at the same time. If the above precaution is not respected, a fuse or any parts will be broken.

Since the circuit diagram is a standard one, the circuit andcircuit constants may be subject to change for improvementwithout any notice.

NOTEDue improvement in performance, some part numbers showin the circuit diagram may not agree with those indicated inthe part list.When ordering parts, please use the numbers that appearin the Parts List.

STANDARD CIRCUIT DIAGRAMNOTE ON USING CIRCUIT DIAGRAMS

(7)Ground symbol

: LIVE side ground

: ISOLATED(NEUTRAL) side ground

: EARTH ground

: DIGITAL ground

(6)Connecting method

: Connector : Wrapping or soldering

: Receptacle

(5)Test point

: Test point : Only test point display

Respective voltage values are indicated

: B1

: 9V : 5V

: B2 (12V)

(4)Power Supply

Type

MM : Metalized mylar capacitorPP : Polypropylene capacitorMPP : Metalized polypropylene capacitorMF : Metalized film capacitorTF : Thin film capacitorBP : Bipolar electrolytic capacitorTAN : Tantalum capacitor

(3)Coils

No unit

Others

: [µH]

: As specified

No indication : Ceramic capacitor

(2)CapacitorsCapacitance value

1 or higher : [pF]less than 1 : [µF]Withstand voltageNo indication : DC50[V]

Others : DC withstand voltage [V]

AC indicated : AC withstand voltage [V]Electrolytic Capacitors

47/50[Example]: Capacitance value [µF]/withstand voltage[V]

Composition resistor 1/2 [W] is specified as 1/2S or Comp.

Type

No indication : Carbon resistorOMR : Oxide metal film resistorMFR : Metal film resistorMPR : Metal plate resistorUNFR : Uninflammable resistorFR : Fusible resistor

4.INDICATIONS ON THE CIRCUIT DIAGRAM(1)Resistors

Resistance value

No unit : [Ω]

K : [kΩ]M

Rated allowable powerNo indication : 1/16 [W]

Others : As specified

: [MΩ]

3.INDICATION OF PARTS SYMBOL [EXAMPLE]

In the PW board : R1209 R209

1.SAFETYThe components identified by the symbol and shading arecritical for safety. For continued safety replace safety ciriticalcomponents only with manufactures recommended parts.

Since the voltage values of signal circuit vary to some extentaccording to adjustments, use them as reference values.

2.SPECIFIED VOLTAGE AND WAVEFORM VALUESThe voltage and waveform values have been measured under thefollowing conditions.

(1)Input signal : Colour bar signal

(2)Setting positions of each knob/button and variable resistor

(3)Internal resistance of tester : DC 20kΩ/V

(4)Oscilloscope sweeping time : H 20µs / div

: V 5ms / div

: Othters Sweeping time isspecified

(5)Voltage values : All DC voltage values

: Original setting position when shipped

AV-14A16, AV-14A16/A, AV-14A16/L, AV-14FMG6B/G

(No.YA391)2-1

SEMICONDUCTOR SHAPES

CONTENTSSEMICONDUCTOR SHAPES ......................................................................2-2BLOCK DIAGRAM........................................................................................2-3CIRCUIT DIAGRAMS....................................................................................2-5

MAIN PWB CIRCUIT DIAGRAM [AV-14A16, AV-14A16/A, AV-14A16/L] (1/3) ............................................ 2-5MAIN PWB CIRCUIT DIAGRAM [AV-14A16, AV-14A16/A, AV-14A16/L] (2/3)(3/3) ..................................... 2-7MAIN PWB CIRCUIT DIAGRAM [AV-14FMG6B/G] (1/3) ............................................................................ 2-9MAIN PWB CIRCUIT DIAGRAM [AV-14FMG6B/G] (2/3)(3/3) ....................................................................2-11

PATTERN DIAGRAMS .............................................................................. 2-13MAIN PWB PATTERN [AV-14A16, AV-14A16/A, AV-14A16/L] .................................................................. 2-13MAIN PWB PATTERN [AV-14FMG6B/G] .................................................................................................. 2-15

VOLTAGE CHARTS .................................................................................. 2-17WAVEFORMS ............................................................................................ 2-18

USING P.W. BOARD

PWB ASS'Y name AV-14A16 AV-14A16/A AV-14A16/L AV-14FMG6B/GMAIN P.W.BOARD SCG-1552A-H2 SCG-1555A-H2 SCG-1553A-H2 SCG-1544A-H2

ICBOTTOM VIEW FRONT VIEW TOP VIEW

1 N

N1

OUT

E

ININ OUTE

1 N

TOP VIEW

N

1

N

N

N

1

N

CHIP IC

TRANSISTORBOTTOM VIEW FRONT VIEW TOP VIEW

CHIP TR

ECB

E C B

C

B EB(G)

E(S)

C(D) E C BE C B

2-2(No.YA391)

2-4(No.YA391)(No.YA391)2-3

MAIN PWB(1/3, 2/3)

MAIN PWB(3/3)

REAR OUTVIDEO

AUDIO

AC IN

LF901POWER SW

IF

SCREEN

EHV

9V OUT

AUDIO OUT

SAW

STB_PW

LED(TIM)

REMOCON

V OUT

H OUT

G OUT

R OUT

B OUT

EXTRGB/YS

VIDEO IN

VIDEO OUT

AUDIO IN

AUDIO OUT

SCL/SDASCL/SDA

SCL/SDA

5V OUT

B1

FOCUS

TU001

TUNER

SPEAKER L

SPEAKER R

HEADPHONE

REMOCON

RECEIVER

POWER LED

TIMER LED

CRT

(V)

(H)

DEF YOKE

IC702MEMORY

Q102IF AMP

SF102

SAW FILTER

IC921POWER

REG.

IC9719V REG.

IC9725V REG.

IC421

V OUT

Q522

H OUTQ521

H DRIVE

D901

T522

FBT

R OUT

Q351

G OUT

Q352

B OUT

Q353

IC701

MICRO COMPUTERIC301

1CHIP DECODER

IC651AUDIO AMP

IC7035V REG.& RESET

T921

SWTRANSF.

REAR INVIDEO

AUDIO

FRONT INVIDEO

AUDIO

BLOCK DIAGRAM

(No.YA391)2-5 2-6(No.YA391)

C721

R714

D703

C729

R720

K704

C719

Y705

C723

R374

R773 R772

R736

D501

C712

R721R726 R730

R728

D306

R737

Q703

R748 C738

K703

C710Q702

S704

S701

C709

IC704S702

S703

C658

R727

S705

K701

R731

R706

C724

C722

R738 R739

R707

R718

R725

R713

R712

Q161

R742

IC701

C725 C720Y160

C711

R734

Y001

IC702

C728C730

D102

D707

IC703

C708

C706

C707

C663

C652

R115

Y002

C705

R746

R118

Y301

R117

R112

C114

R162

R161

R164

R163

R114

R165

R327

CF161

Q103

SF102

R749

C114

C164

C161

IC701

R815

J003

J002

J004

Q708

R806

R740

R741

D731

C811

R811

C805

C812

Q804

R807

R802

R817

Q803

C806

R816

R301

R302

C341

C306

C304C303

C367

D341

C305

C119

C324

C315

Q302

C120

C314

R307C503 C502

C316

R401

C317

TU001

C323

R161

Q301

C166

R321

L104

C165

R796

C744

R160

X302

C321

R322

C322

R323

R325

R324

D301

Y302

R326D302

C161

CF161

R341

IC651

R653

Q710

C162

R797

D655

C401

C313

Y976

Y975

C307

C301

R158

SF122SF101

IC301

C121

X301

C366

R308

C309 R503

C308

C365

C302

R103

CN00T

C112

C113

C117

R159

C166

C402

C109

C108

D102

Q102

R116

R111

R115R117

C105

C111

L101

R113

C110

R114 R109

C106

R110

C103

C107

CF102

C104

CF103

R112R118

Q103

R001

C164

C009

R002

C007

D001

C006

C001

C002

R004

R003

C005

K001

C008

L002

R166

R163

C653

C659

CN00S

R666

R665

R656

C109

C664

D654

R667

R668

D652 D651

C655

R654

C656

R657R658

D653

Q651 C651

R810

R651

R660 C654

R659

J005

R102

R164

R165

Q161

R166 C165

C841

D305

C842

SF102

C325

R662 R661

D656

C657

C437

LBX701

IC001

Q653

L001

C004

C003

CF162

Y160

R655

D657

Q652

C665

C504

R652

R664

Y161

C731

L701

D706

C713

C736

C735

C734

C733

C732

C717

R729

R709

R710

R711 C

716

R715

R716

C718

R708

D303

R750

R303

R120

L103

R121

C311

R314

C501

R502

R312

C310

R501

R313

R304

R305

C122

C326

C115

C116

R306

R723

C312

AB

L

9V

V_S

YN

C

H_O

UT

H_V

CC

FB

P

V_O

UT

A.P

RO

T

P_O

N/O

FF

5V

A_V

CC

A_G

ND

ST

B_P

W

32V

R162

CP

701

R719

C726

SPR-39MVWF

CH

QUY153-050Y

QUY153-050Y

QRG01GJ-561

SW

QUY153-050Y

-1555ASCG

SW

QSW0619-003Z

QSW0619-003ZGP1UM281QK

REMOCON RECEIVER

QSW0619-003Z

QSW0619-003Z QSW0619-003Z

QUY153-050Y

CH

MICOM

QUY160-100Y

QUY160-100Y

MEMORY

CHL78LR05E-MA

QETN1AM-108Z

QUY153-050Y

QAX0666-002

MN1873287JL1

SCG-1552A

SCG-1553A

QUY160-100Y

2SD601A/QR/-X

MA859-T2

QUY160-100Y

QAX0666-002

-1556ASCG

QAX0642-001Z

UN2212-X

QAX0731-001

MN1873287JL1

1/2W

QNN0384-001

SW

1/2W

2SC3928A/QR/-X

SW

NRSA02J-680X

KTC3199/YG/-TBUFFER

QAX0666-002

TFCH

N

BP

BUFFER

CH

IF

BTPS( 32)

AGC

BT

AS

SCL

SDA

BM

5V

LOCK

NC

NC

QAU0246-002

MN1873287JL1

BUFFER

QAX0860-001Z

CH

AN5265

SW

TF

QUY160-150Y

QAX0325-001SAW FILTER

SAWFILTER

NN5198KDECODE

QAX0705-001Z

N

BP

N

BP

QJL001-052210

TF

TF

AMP

QQL244J-2R2Z

SW

MTZJ33A-T2

TF

QUY153-050Y

N

NCQGA2501C5-03Z

MN1873287JJ1

1/2W

QRT029J-5R6

N

BP

SWOPT

QRG01GJ-560

1/2W

QNS0197-001

AMP

1K4-T2

BP

1/2W 1/2W

QAX0884-001

MUTE

QQL244K-8R2Z

SW

QUY160-100Y

QQ

L244J-5

R6Z

CH

CH

QQ

L244K

-8R

2Z

CH

5%

QR

L039J-2

70

BP

QU

Y153-0

50Y

CP

N

IN OU

TG

ND

.033

4.7k

180p

4.7k

1/50

56p

6.8K

560 390

82k

*6

.01

10k4.7k 10K

1k100k

*1

100 X

100/16*1

.01

220/25

15k 4.7k

560

56p

100p

10k 10k

560

560

1k

4.7k

4.7k

X

56k

*

X

X .01

X

.01

X

X

X

180p.01

*4

1010

X

1000/10

.01

.01

X

.001

.047

X

470/16

X

X X

10k

X

X

x

X

X

*

X

X

X

X

*

X

X

X

X

X

X

X

X

X

X

X

X

X

4.7M

X

X

10

X

X

X

22

X

2.2K

0

2.2K

1K

X

X

4.7k

1.2K

2.2K

220

22

4.7K

X

X

X

X

X

X

X

X

X

X

180

*3

270

3.9k

560

*4

10/50

220

220/16

X

68

75

X

4.7k

470/16

680

X

220

4.7k

10/50

.01

.47/5010p

1/50

*4

.47/50

X

.47/50

X

10/50

100/16

*1

120p

.01

1.2k10/50 .01

10/50

10k

.047/25 0.47/50

X

*

X

*2

*

1.5k

X

X

10k

.01

X

X12p

2.7k

.027/25

10k

X

1k

*5

0

100*5

*

3.3K

330

*3

1500p

15k

*4

.47

3.3/50

X

470/16

680p

X

X

X

.01

1/50

1.8k

.01 6.8k

100/16

1/50

4.7/50

10

47/25

.0047

.22

180k

X

*

X

*

*10

X

.01

180

**

.0047

X

100

0

* 6.8k

.0047

2.7k

47/25

.0047

X

.0047

X

**

*

X

*

X

220

X

X

10/50

.01

56k

220

.1

4.7/50

X

.01

X

.01*

10/50

.01

4.7/50

X

100

10k

8.2k

100/16

*7

100

5.6

*7 *4

10/50

22k

1/50

2.2k2.2k

*4

*1

56

4.7k

15k 470/16

4.7

.1

820

4.7p

75

*

*

*

* *

1500p

X

*

10/50

270 270

*4

100/25

.1

X

*2

8.2

470/16

x

X

*

47k

*4

*1

.01

X

1k

6.8k

X

5.6

X

.01

X

XXX

X

180p

1k

4.7

k

4.7

k

4.7

k 180p

220

220

.01

1k

X

100

390

8.2

220

.01

1k

470/1

0

0

0

220p

BW

1k

*

100

100

.01

220p

.01

.01

220

27

.47/5

0

*

1k

X

2SDA1

SCL1

VIDEO

LINE_A

2

LINE_V

2

V_OUT

SCL1

SDA1

V_SYNC

VIDEO

A_MUTE

LINE_A

FBP

1

PIC_MUTE

AFT

LINE_V

1

AUDIO

3.58/OTH

AUDIO

A_M

UT

E

A.P

RO

T

AF

T

VO

L

OS

D_Y

S

ST

B_P

WS

CL1

SD

A1

OS

D_Y

S

A.P

RO

T

3.5

8/O

TH

OS

D_B

V_O

UT

VO

L

A_M

UT

E

A_V

CC

A_G

ND

OS

D_G

OS

D_R

OS

D_G

OS

D_B

A_V

CC

H_V

CC

PIC

_M

UT

E

H_O

UT

V_S

YN

C

FB

P

H_O

UT

A.P

RO

T

P_O

N/O

FF

A_G

ND

ST

B_P

W

P_O

N/O

FF

OS

D_R

POWER LED(GREEN) ON TIMER LED(RED)

SPEAKER

c21231001a.001_1/2

MAIN PWB(2/3) SHEET 2

MAIN PWB ASS'Y(3/3) (CRT SOCKET)

CN10T

NOTE) 1.Refer to the parts list for the part number of IC702.

REAR IN

REAR OUT

AUDIO

VIDEO

FRONT IN

VIDEO

AUDIO

AUDIO

VIDEO

MAIN PWB ASS'Y (1/3)SCG-1552A-H2 [AV-14A16] SCG-1555A-H2 [AV-14A16/A] SCG-1553A-H2 [AV-14A16/L]

CIRCUIT DIAGRAMS MAIN PWB CIRCUIT DIAGRAM [AV-14A16, AV-14A16/A, AV-14A16/L] (1/3) SHEET1

2-8(No.YA391)(No.YA391)2-7

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

MAIN PWB ASS'Y (3/3) (CRT SOCKET)SCG-1552A-H2 [AV-14A16] SCG-1555A-H2 [AV-14A16/A] SCG-1553A-H2 [AV-14A16/L]

C551

IC971

IC972

C552

R430

T921

Q571

C944

C945

R979

Q522

C523

T501

R444

C927

L522

Y501

D982

R991

Y502

FR556

R976

C977C976

C992

R453

T522

D901

D931

R903

C571

VA901

Q401

FR556

LF901

R526

R904

D928

R521

R934

R436

C947

C931

H004

R928

R566

R565

D425

D921

D427

C924

C429

C526

CNDEG

R933

Q981

R566

C528

Q402

D985

Q982

C562

R981

R923

D986

R983

R982

C991

C909

R984

R421 C428

R977

CN0HVCN0S1

C433

R963

R423

Q974

C422 R425

R426

IC421

R441

C421

RY971

R577

K421

C427

R962

R905

R576

D925

R571

R906

R964

R925

C929

C904

C926

C907

CP982

R961

C582

L943

K941

C942

D943

D942

C946

R924

R922

D920

C993

IC921

D561

D562

R965

L941

C961

Y961 Q961

R901

TP-47B

C430

L942

SCREEN

R359

Q962

CN10U

C978

R365

C905

Q352

C930

C554

R422

R974

C971

Y972Y973

Q975

K902

D983

Y902

C932

R984

R982

R981

R921

R983

K901

D985

D986

Q572

C981

Q981

Q982

C426

D554

R368

D581

R356

R424

R583

C941

D929

K942

C948

R582

R364

CP981

R362

R351

R552

R551

C553

R363

D553

R442

C901

Q351

R581

R357

TH901

C356

S901

F901

Q353

R432

C909

R367

R366

R443

R433

R985

D973

Q973

R986

R987

C572

D424

C436

D423

Y903

C561

R980

C354

R355

R354

CN00U

R361

R360

C357

C355

R529

R524

SK351

SK351

C555

D552

C424

CN0PW

FOCUS

D582

TP-E

R353

R352

C529

C925

R358

R978

C581

D941

R530

C949R554

C352

Y303

Y304

D562

C351

L551

D561

C531

R565

D571

C562

R440

K351

C910

K943

R347

R348

R575

D555

R349

R345

R346R431

C435

Y503

D551

L351

L352

L353

R578

C530

R528

R525

R573

D584

R574

C922

D933

R935

D421

R585

R532

R531

Q521

C423

D974 R988

C979

CN0S2

C972

H_

VC

C

9VA_

GN

D

R4

29

D9

30

P_

ON

/OF

F

D9

27

C4

25

R9

29

TP

-47

G/R

LB

A_

VC

C

5VST

B_

PW

A.P

RO

T

CN

10

T

L3

54

R5

84

C5

27

C5

25

R3

69

TP

-47

R/G

AB

L

V_

OU

T

V_

SY

NC

FB

P

32

V

D3

51

D3

52

H_

OU

T

D3

53

L7809CP

L7805CP

QETM1VM-108

QQS0213-001

2SA1208/ST/Z1-T

PROTECTORFBT

QCB32HK-222Z

QEHR1EM-108Z

3WOMR

TT2140LS-YB11

QQR1522-001

1/2W

QUY153-050Y

QRZ9046-825Z

QUY153-050Y

FR

-1555ASCG

2WOMR

H

400VACQCZ9071-102

FBTQQH0168-001

G2SBA60

QRL029J-104

DTC124ESA-TV.NECK

QQR0673-002

1/2W

QCB32HK-222Z

QCZ0364-681

3WOMRQRL039J-683

MTZJ27B-T2

MY

QGZ5003C1-02

1/2W

SW

QEZ0476-127

QRZ0237-R18

SCG-1552A

QEZ0633-127

400VACQCZ9071-102

SCG-1553A

1/2W

QGZ5003C1-04QGA2501C5-05Z

QEHR1HM-475Z

2SA966/OY/-T

SW

LA78040N V.OUT

DEG RELAY

1/2W

1/2W

1/2W

QEZ0476-127

2WOMRQRL029J-104

QFKA2JK-103

QCZ9054-102

TF

QFLC1HJ-332Z

QCZ9054-102

ICP-N75-T

CP

QRZ9017-4R7

QQL244J-4R7Z

QEZ0203-107

NRSA02F-3401X

ERC30-02L38EH

1/2W

1SS133-T2

400VACQCZ9071-152

NRSA02F-6651X

STR-W5753A/F5

2SA1530A/QR/-X

2SC2785/JH/-T

MA111-X

MA111-X

QQL26AK-820Z

QUY160-100Y

QRF074K-4R7

MY

QQL244J-4R7Z

U

QJL001-042616

2WOMR

QCZ9054-102

2SC4015/N/-TG-OUT

SW

QUY160-150Y

1/2W

SW

SW

SW

MTZJ20B-T2

2kV

QCZ0364-561

QETN1EM-108Z

2WOMR

ICP-N50-T

CP

QRZ0107-152Z

QRJ146J-2R2X

1WQRX029J-R47

2WOMR

MTZJ9.1B-T2

MFAC275VQFZ9078-224

2SC4015/N/-TR-OUT

1/2W

QAD0121-9R0

CH

QSW0750-001

QMF51E2-3R15-S

2SC4015/N/-TB-OUT

1/2W

T

1/2W

1/2W

TF

QUY160-125Y

2WOMRQRL029J-183

CH

U

QJL001-042616

QRZ0107-152Z

QRZ0107-152Z

CH

3WOMR

QNZ0796-001

QNZ0796-001

MY

QFLC2AJ-103Z

PW

QGA7901C1-02

MY

TF

RU3AM-LFC4

NDC31HJ-471X

1/2W

QFZ0097-103

QUY153-050Y

QUY153-050Y

QQLZ026-220

QEZ0203-107

MTZJ7.5S-T2

G

B

R

QRG01GJ-221

QQR0621-002Z

275VAC MFQFZ9072-473

-1556ASCG

QEZ0476-127

1SR124-400A-T2

MTZJ7.5S-T2

QUY153-050Y

QUY153-050Y

QUY153-050Y

QRL029J-680

2WOMR

2WOMR

MTZJ16C-T2

1/2W

MTZJ75-T2

2SC2655/Y/-T

FR

10

7G

T-T

3

MT

ZJ3

6A

-T2

QJL

00

1-0

52

21

0

QU

Y1

53

-05

0Y

QU

Y1

60

-10

0Y

25

0V

QF

Z0

19

9-6

84

1.2

5kV

QF

Z0

20

0-8

02

X

X

1000/35

82k

1000/25

47

47/25

X

0.1

X

*4

8.2M

*

X

12

220/16220/25

.001

2.7k

*4

100K

100/10

270

X

*7

X

68k

X

82k

X

68k

X

X

X

*4

*5

4.7/50

10/50

.01

X

4.7

X

X X

XX*

X

*1

X X

X

X

X

X

X

X

X

*

X

X

X

X

X

X

X

X

X

X

X

.001

X

X

X

4.7k

X

100/35

X

X

1.2k

4.7/50

X

0

X 3.3k

0

8.2k

X

X

5.6k

*8

100/35

X

X

22k

*5

2.7k X

100k

X

X

1M

.01

.001

3300p

.001

X

X

4.7

*8

100/160

*5

1000/25

150k

220

1500p

X

47/50

X

X

82

X

X

.0047

4.7

100

X

220/25

12k

.001

X

4.7/250

X

2.2k

X

X0

*3

*8

*4

220p

*

*

*

1.8

*

*8

*

*

*1

X

*

*

.001

*4

1.8k330

0

39k

560p

X

*8

1000/25

27k

12k

1.5k

X

1

X

12k

10k

1.8k

100

330pT3.15AL

3.9

*

1.8k

1.8k

1

3.9

X

X

X

X

X

47/25

X

.33

*6

X

18K

270p

330

330

1.5k

1.5k

470/10

220p

220

X

.1/100

*5

.01

*5

150

X

.001

47/35

100

47k

.1

X

470p

680

.01

*

X

*

100/160

*

*

*

*8

X

X

X

X

X

150

150

10k

2200/25

X

27K

10K

82K

18K

*5

10k

X

X

68

2.2

X

2.2

0.1

3.9K

X

1k

330

18p

X X

220/10

X

X

10

k

X

X

X

X X X

V_OUT

V_

SY

NC

MAIN PWB ASS'Y (2/3)SCG-1552A-H2 [AV-14A16] SCG-1555A-H2 [AV-14A16/A] SCG-1553A-H2 [AV-14A16/L]


MA

IN P

WB

AS

S'Y

(1/3

) C

N0

0T

c21231002a.001_2/2

ADJUSTMENT CONNECTOR

DEF YOKE

DEG COIL

AC110V-AC240V 50Hz/60Hz

MAIN PWB CIRCUIT DIAGRAM [AV-14A16, AV-14A16/A, AV-14A16/L] (2/3),(3/3) SHEET 2

(No.YA391)2-9 2-10(No.YA391)

C721

R714

R771

C729

R720

K704

C719

Y705

D704

D306

R773

D705

R772

D706

R736

D501

C712

R721 R726 R730

R728

Q703

R748

C738 K703

C710

Q702

S704

S701

C709

IC704S702

S703

C658

R727

S705

R731

R706

C724

R738 R739

R707

R718

R713

R712

SF102

R742

IC701

C725

CN0S5

C720

Q103

C711

R734

R773

Y001

C723

IC702

C728

C730

C114

D707

IC703

CF161

C706

C707C663

C652

Y160

Y002

C705

R771

R746

R114

Y301

R112

D102

Q710

R117

R115

R701

C109

D705

R118

CF162

R327

C114

R749

IC701

R815

J003

J002

J004

Q708

R806

R740

R741

D731

C811

R811

C805

C812

Q804

R807

R802

R702

R817

Q803

C806

R816

R301

R302

C341

C306

C304C303

C367

D341

C305

C119

C324

C315

Q302

C120

C314

R307C503 C502

C316

R401

C317

TU001

C323

R161

C166

R321

L104

Y653

Y655

C744

R160

X302

C321

R322

C322

R323

R325

R324

D301

Y302

R326D302

C161

CF161

R341

IC651

R653

Q710

C162

R797

D655

C401

C313

Y976

Y975

C307

C301

R158

SF122SF101

IC301

C121

X301

C366

R308

C309 R503C308

C365

C302

R103

CN00T

C112

C113

C117

R159

R306

C402

C109

C108

D102

Q102

R116

R111

R115R117

C105

C111

L101

R113

C110

R114 R109

C106

R110

C103

C107

CF102

C104

CF103

R112R118

Q103

R001

C164

C009

R002

C007

D001

C006

C001

C002

R004

R003

C005

K001

C008

L002

R163

C653

CN0S3

C659

CN0S4

R666

R665

R656

C664

D654

R667

R668

D652 D651

D701

C655

R654

C656

R657R658

D653

Q651

C651

R810

R651

R660 C654

R659

R374

J005

R102

R165

Q161

R166

C841

D305

C842

C701

SF102

C325

R662 R661

PC701

Q709

R703

D656

C657

C437

LB

X701

IC001

Q653

L001

C004

C003

CF162

Y160

J006

R655

D657

C665

C504

R652

R664

Y161

C731

L701

C713

C736

C735

C734

R737

C733

C732

K701

C717

R729

R709

R710

R711

C722

R725

C716

R715

R716

C718

R708

C708

D303

R750

Y654

R303

R120

L103

R121

C311

R314

C501

R502

R312

C310

R501

Q301

R313

R796

R304

R305

C122

C326

C115

C116

R723

C312

AB

L

9V

V_S

YN

C

H_O

UT

H_V

CC

FB

P

V_O

UT

A.P

RO

T

P_O

N/O

FF

X_R

AY

5V

A_V

CC

A_G

ND

ST

B_P

W

32V

R162

R164

C165

CP

701

R719

C726

Q652

CH

QUY153-050Y

QUY153-050Y

LH22440-T16

QRG01GJ-561

2SC3928A/QR/-X

SW

QUY153-050Y

2SC3928A/QR/-X

SW

QSW0619-003Z

QSW0619-003ZGP1UM281QK

REMOCON RECEIVER

QSW0619-003Z

QSW0619-003Z QSW0619-003Z

CH

QAX0731-001

MICOM

QAX0642-001Z

MEMORYCH

QAX0666-002

L78LR05E-MA

MA859-T2

QUY153-050Y

-001ZQAX0694

QUY153-050Y

QUY160-100Y

MA3091/M/-X

LE22440-T16

LG22440-T16

SCG-1544A

SCG-1545A

-001ZQAX0694

MN1873287JJ1

MN1873287JM

1/2W

QNN0384-001

SW

1/2W

2SC3928A/QR/-X

SW

KTC3199/YG/-TBUFFER

TFCH

BP

2SC3928A/QR/-XBUFFER

CH

IF

BTPS( 32)

AGC

BT

AS

SCL

SDA

BM

5V

LOCK

NC

NC

QAU0246-002

QUY153-050Y

QAX0860-001Z

CH

AN5265

SW

TF

QUY160-150Y

QAX0325-001SAW FILTER

SAWFILTER

NN5198KDECODE

QAX0705-001Z

BPBP

QJL001-052210

TF

TF

2SC5397/CD/-TAMP

QQL244J-2R2Z

SW

MTZJ33A-T2

TF

QUY153-050Y

QGA2501C5-04ZNC

1/2W

QRT029J-5R6

BP

2SC3928A/QR/-X

OPT

QRG01GJ-560

1/2W

QNS0197-001

AMP

1K4-T2

SAW FILTER

BP

1/2W 1/2W

QAX0884-001

2SA1530A/QR/-X

QQL244K-8R2Z

NRSA63J-102X

QUY160-100Y

QQ

L244J-5

R6Z

QU

Y153-0

50Y

CH

CH

QU

Y153-0

50Y

QQ

L244K

-8R

2Z

CH

2S

A1530A

/QR

/-X

BU

FF

ER

5%

3W

OM

R

QR

L039J-2

70

BP

QU

Y153-0

50Y

CP

IN OU

TG

ND

2S

C3928A

/QR

/-X

.033

4.7k

*

180p

4.7k

1/50*

*

820

X

82k

*6

.01

10k 4.7k 10K

1k

820

100

X

X

100/16

.01

220/25

15k 4.7k

560

150p

10k10k

560

560

4.7k

4.7k

56K

*

X

X

.01

*3

.01

X

X

X

180p

.01

*

*4

2.2K

.01

.01.001

.047

470/16

22

4.7K

10k

X

X

x

1.2K

X

2.2K

0

10

*

X

*3

X

2.2K

.0047

X

X

X

.01

X

X

4.7M

X

4.7k

180

*3

270

3.9k

560

*4

10/50

220

220/16

X

68

75

X

4.7k

470/16

680

220

4.7k

10/50

.01

.47/5010p

1/50

*4

.47/50

.47/50

10/50

100/16

120p

.01

1.2k10/50 .01

10/50

10k

.047/25 0.47/50

1K

0.1

1.5k

X

X

.01

X

12p

2.7k

.027/25

10k

X

1k

*5

0

100*5

0.01

*

3.3K

330

*

1500p

15k

*4

.47

3.3/50

X

470/16

680p

X

X

.01

1/50

1.8k

.016.8k

100/16

1/50

4.7/50

10

47/25

.0047

.22

180k

220

X

*

X

*

X

180

**

.0047

X

100

0

* 6 .8k

.0047

2.7k

47/25

.0047

X

.0047

X

**

*

X

0.01

X

220

X

X

10/50

.01

56k

220

.1

4.7/50

X

2.2K

10/50

4.7/50

X

100

10k

8.2k

100/16

*7

100

5.6

*7 *4

X

10/50

22k

1/50

2.2k2.2k

*4

56

4.7k

15k 470/16

4.7

6.8K

75

22

*1

820

1500p

X

X

*

10/50

270 270

X

X

X

*4

100/25

.1

X

8.2

470/16

x

*

*

X

47k

*4

.01

X

1k

6.8k

X

5.6

.01X

XX

100k

X

X

180p

1k

4.7

k

4.7

k

4.7

k

100p

1k

180p

220

220

.01

1k

1000/1

0

X

100

390

8.2

220

.01

1k

47/2

5

0

0

220p

10

1k

10k

100

100

.01

220p

.01

.01

27

.47/5

0

1.2

K220

0.0

1

1k

X

2SDA1

SCL1

AUDIO

VIDEO

LINE_A

2

LINE_V

2

V_OUT

SCL1

SDA1

VIDEO

A_MUTE

LINE_A

FBP

1

PIC_MUTE

AFT

LINE_V

1

AUDIO

3.58/OTH

A_M

UT

E

OS

D_Y

S

SC

L1

AF

T

VO

L

SD

A1

A.P

RO

T

V_S

YN

C

ST

B_P

W

OS

D_Y

S

3.5

8/O

TH

OS

D_B

V_O

UT

A.P

RO

T

VO

L

A_M

UT

E

A_V

CC

A_G

ND

OS

D_G

H_O

UT

OS

D_R

OS

D_G

OS

D_B

A_V

CC

H_V

CC

PIC

_M

UT

E

H_O

UT

V_S

YN

C

FB

P

A.P

RO

T

P_O

N/O

FF

X_R

AY

A_G

ND

ST

B_P

W

P_O

N/O

FF

OS

D_R

ON TIMER LED (ORANGE)

POWER LED (RED)

SPEAKER

c21228001a.001_1/2

MAIN PWB ASS'Y(3/3) (CRT SOCKET)

CN10T


NOTE) 1.Refer to the parts list for the part number of IC702.

AUDIOFRONT

IN

REAR IN

REAR OUT

AUDIO

VIDEO

VIDEO

AUDIO

VIDEO

MAIN PWB ASS'Y (1/3)SCG-1544A-H2 [AV-14FMG6B/G]

MAIN PWB CIRCUIT DIAGRAM[AV-14FMG6B/G] (1/3) SHEET3

2-12(No.YA391)(No.YA391)2-11

!

!

!

!

!

!

!

!

!

!

!

!

!

! !

!

!

!

! !

!

!

!

!

!

!

C551

IC971

IC972

C552

R430

T921

Q571

C944

C945

R979

Q522

C523

T501

R924

L522

Y501

D982

R444

R991

TP-47B

Y502

FR556

SCREEN

R976

C977C976

C992

R453

T522

D901

D931

R903

C571

VA901

Q401

LF901

R526

R904

R521

R934

R436

C947

R359

C931

H004

R928

CN10U

R365

Q352

SK351

D425

R368

D921

D427

C924

C429

C526

CNDEG

R356

R933

R364

R362

R351

R363

R566

C528

Q351R357

C356

Q353

R367

R366

L354

C354

R925

R355

R354

R361

R360

R923

C357

C355

SK351

FOCUS

TP-E

R353

R352

R369

R358

C991C352

Y303

Y304

C351

R421 C428

R977

CN0HVCN0S1

C433

R963

R423

Q974

C422

K351

R425

R426

IC421

R441

C421

RY971

R577

K421

C427

R962

R347

R576

D925

R571

R348

R349

R345

R346

R964

C929

C904

C926

C907

CP982

R961

C582

L943

K941

C942

D943

D942

C946

R922C927

C993

L351

L352

IC921

L353

R965

L941

C961

Q961

R901

C430

L942

D920

Y904

Q962

C978

C905

C930

C554

R422

R974

C971

Y972Y973

Q975

K902

D983

Y902

C932

R984

R982

R981

R921

R983

K901

D985

D986

Q572

C981

Q981

Q982

C426

D554

Y905

D581

R424

R583

C941

D929

K942

C948

R582

CP981

R552

R551

C553

D553

R442

C901

R581

TH901

S901

F901

R432

C909

R443

R433

R985

D973

Q973

R986

R987

C572

D424

C436

D423

Y903

C561

R980

CN00U

R529

R524

C555

D552

C424

CN0PW

D582

D928

C925

R978

C581

D941

R530

C949

R554

Y961

D562

L551

D561

C531

R565

D571

C562

R440

R906

C910

K943

R575

D555

R431

C435

Y503

C425

D551

R578

C530

R528

R525

R573

D584

R574

C922

D933

R935

D421

R585

R532R531

Q521

C423

D974 R988

C979

CN0S2

C972

H_

VC

C

9VA_

GN

D

R9

29

R4

29

TP

-47

G/R

D9

30

P_

ON

/OF

F

Q4

02

CN

10

T

TP

-47

R/G

D3

51

D3

52

D3

53

LB

A_

VC

C

5V

X_

RA

Y

ST

B_

PW

A.P

RO

T

R5

84

C5

27

C5

25

D9

27

C5

29

AB

L

V_

OU

T

V_

SY

NC

FB

P

32

V

H_

OU

T

L7809CP

L7805CP

QETM1VM-108

QQS0213-001

2SA1208/ST/Z1-T

PROTECTORFBT

QCB32HK-222Z

QEHR1EM-108Z

3WOMR

TT2140LS-YB11

QQR1522-001

QUY153-050Y

QRZ9046-825Z

QUY153-050Y

FR

2WOMR

400VACQCZ9071-102

FBTQQH0168-001

G2SBA60

2WOMRQRL029J-104

QAF0072-621

DTC124ESA-TV.NECK

QQR0673-002

1/2W

1/2W

QCB32HK-222Z

2kVQCZ0364-681

3WOMRQRL039J-683

UQJL001-042616

2WOMR

2SC4015/N/-T

G-OUT

QNZ0796-001

MTZJ27B-T2

MY

QGZ5003C1-02

1/2W

2WOMR

QRZ0107-152Z

2WOMR

2SC4015/N/-TR-OUT

CH

2SC4015/N/-TB-OUT

T

QUY153-050Y

CH

QRZ0107-152Z

QRZ0107-152Z

QRZ0237-R18

CH

QNZ0796-001

400VAC

QCZ9071-102QFZ0097-103

QUY153-050Y

QUY153-050Y

G

B

R

1/2W

QGZ5003C1-04QGA2501C5-05Z

QEHR1HM-475Z

2SA966/OY/-T

SW

QQR0621-002Z

LA78040N V.OUT

DEG RELAY

1/2W

1/2W

QFKA2JK-103

QCZ9054-102

TF

QFLC1HJ-332Z

QCZ9054-102

ICP-N75-T

CP

QQL244J-4R7Z

QEZ0203-107

FR105GT-T3

ERC30-02L38E

H

1/2W

400VACQCZ9071-152

QUY153-050Y

QUY153-050Y

STR-W5753A/F5

QUY153-050Y

QQL26AK-820Z

QRF074K-4R7

MY

QQL244J-4R7Z

1SS133-T2

QUY153-050Y

QCZ9054-102

SW

QUY160-150Y

1/2W

2SC3928A/QR/-X

SW

SW

SW

QUY153-050Y

MTZJ20B-T2

2kV

QCZ0364-561

QETN1EM-108Z

ICP-N50-T

CP

QRJ146J-2R2X

1WQRX029J-R47

MTZJ9.1B-T2

MFAC275V

QFZ9073-224

1/2W

QAD0121-9R0

QSW0750-001

QMF51E2-3R15-S

1/2W

QEZ0476-127

SCG-1544A

1/2W

1/2W

TF

QUY160-125Y

2WOMR

SCG-1545A

U

QJL001-042616

QRL039J-221

MY

QFLC2AJ-103Z

PW

QGA7901F1-02

MY

TF

RU3AM-LFC4

NDC31HJ-471X

1/2W

QUY160-100Y

QQLZ026-220

QEZ0203-107

MTZJ7.5S-T2

1WOMR

2WOMR

QRL029J-104

275VAC MFQFZ9072-473

2WOMR

QRT029J-2R2

QRT029J-2R2

MTZJ16C-T2

1/2W

MTZJ75-T2

2SC2655/Y/-T

FR

10

7G

T-T

3

2S

C3

92

8A

/QR

/-X

SW

QJL

00

1-0

52

21

0

QU

Y1

60

-10

0Y

25

0V

QF

Z0

19

9-6

84

1.2

5K

VQ

FZ

02

00

-80

2

MT

ZJ3

6A

-T2

X

X

1000/35

82k

1000/25

47

47/25

150K

X

*4

X

8.2M

X

12

220/16220/25

2.7K

*4

100k

100/10

270

X

X

68k

82k

100

68k

12k

*4

1.8k

*5

4.7/50

10/50

0.01/50

330

4.7

12k

X

12k

X

X

100

330p

1.8k

1.8k

270p

1M

330

330

470/10

220p

150

X

X

100X

4.7k 100/35

1.2k

4.7/50

X

0

X 3.3k

0

8.2k

X

X

5.6K

*8

100/35

X

X

22k

*5

2.7K

X

X

150

150

X

.01

.001

3300p

.001

X

X

4.7

*8

100/160

1000/25

2200.1

X

82

X

X

.0047

4.7

X

220/25

.001

X

4.7/250

X

2.2k

X

X0

*3

*8

*4

220p

X

X

X

1.8

X

*8

X

X

X

X

X

330

*4

0

39k

560p

X

*8

1000/25

27K

*

1

X

10k

1.8k

T3.15AL

3.91

3.9

X

X

X

X

X

47/25

X

.33

*6

X

18K

X

.1/100

*5

.01

*5

*7

47/35

47k

.1

X

470p

680

X X

100/160

X X

220

100k

*8

X

X

10k

2200/25

X

X

*5

10k

X

X

68

X.1

3.9k

X

1k330

18p

X X

220/10

X

X

X

10

k

X X X

.00

1/1

00

V_OUT

26V


MA

IN P

WB

AS

S'Y

(1/3

) C

N0

0T

MAIN PWB ASS'Y (3/3) (CRT SOCKET)SCG-1544A-H2 [AV-14FMG6B/G]

c21228002a.001_2/2

MAIN PWB ASS'Y (2/3)SCG-1544A-H2 [AV-14FMG6B/G]

DEF YOKE

ADJUSTMENT CONNECTOR

AC110V-AC240V 50Hz/60Hz

MAIN PWB CIRCUIT DIAGRAM [AV-14FMG6B/G] (2/3),(3/3) SHEET 4

(No.YA391)2-13 2-14(No.YA391)

D303

W411

W605

W479

W412

R582

W603

S701 S702 S703 S704 S705

Q521

Q571

S901

W114

CF102

Q102

R723

D423

D551

D552

D561

D582

D703

D921

W651

D925

D930

D942

D943

W502

Q522

W602

D102

C842

C930

W504

C949

D562

W413

D931

C551

SCREEN

35R9

CP981

CP982

CF103

C651

C981

RY971

IC421

D986

W337

R524

C437

R551

R903

R922

Y972

R552

Q351

C991

R980

FR556

R529

R923

R577

R432

R433

Q352

Q401

R440

R443

R664

Q9 74

R526

CF161

R554

R571

R576

Y903

R581

R653

R986

R662

R921

R981

Q353

R363

W648

C114

R933

R934

R364

R365

C723

R369

R991

PW

W003

C436

R987

CP701

C421

C424

C581

C922

C926

K901

R360

Q962

C555

R361

C430

W004

C427C428

C663

R362

C352

C924

C307

C357

C554

C351

C706

C005

C435

C552

C659

C945

C946

C948

L351

Y001

C531

52 L3

C942

C909

C001

C004

C008

C103

C112

C117

L353

C119

W523

W524

L354

K351

W336

353R

C162

C302

C304

C305

C308

C312

C313

C315C316

C341

W231

R354

C705

R355

R356C

401

J004

C422

C433

C501

C503

C523

C561

C562

C571

C572

C977

C978

C656

C653

R357

R358

R359

R366

C655

C658

R367

W647

D305

R368

W476

C354

C355

C356

R661

TP-E

C971

C976

R502

R351

R573

R651

R748

R977

C553

C425

C944

C947

Y303

Q961

C929

K902

C941

C931

R352R345

R750

W611

R928

C993

L001

L002

L103

R574

SK351

Y304

VA901W

005

R346

R749

L1 01

D706

C901

L551

L941

L942

R531

D707

Q402

Y501

Y502

Q973

D973

W338

R347

R906

C904C905

C925

W612

R348

R349

R976

Y973

W576

L943

C365

TU001

R901

W613

J003

J005

R436

D927

R103

R984

D651

SF102

SF101

IC971

SF122

X301

TP-47B

D554

Q803

H003

H002

D928

Y961

K941

K942

K943

K001

K421

D941

Y503

D352

C907

C992

C525

D353

Y902

W009

D351

L522D354

TH901

H001

D356

Q103

R985

W563

C979

Y002

D355

Q572

C366

D985

TP-47G/R

R806

R815

C805

Q651

Q652

C806

IC702

IC703

C367

TP-47R/G

W615

D001

IC921

C811

D553

D571

D581

R444

C927

C708

C710

W424

R982

C719

W422

W423

D929

R983

D341

W616

D4

24

D425

R978

L701

C664

W617

C665

C326

D652

Y976

W173

C527

R654

C166

R002

R003

R004

R102

W618

W620

W656

W623

R109

R111

R112

R113

R114

R115

R116R117

R118

R120

R121

W626

R719

C812

R816

R736

R817

W628

R301

R302

R303

R304 R305

R306

R307

R308

W481

W482

CL005

R313

R341

J002

D982

D983

R810X7

01

K701

Y705

K703

K704

Q702

Q703

D731

R740

H006

D920

Y301

W011

W566

W012

W014

R401

R421

R422

R423

R424

R425

R426

30R4

R431

R441

R442

R453

R503

W649

R565R566

R575

R583

W073

F901

Q804

R772

R657

R658

R659

R652

R656

R660

W655

Q981

C657

R706R707

R708

R709

R710R711

R712

R713

R714

R7

15

R7

16

R7

18

R720

R721

IC651

R725

R726

R727

R728

R729

R730

R731

S2

R737

R738

W016

R739

W017

R742

R802

R807

R811

R746

W631

D901

C707

C709

C711

C712 C713

W632

C721

C722

C724

IC701

Q982

W023

C720

R974

C002

C003

C006

C007

W578

C105

C106

C107

C108

C109

C110C

111

C113

C115

C116

C120

C121

C122

C652

W579

W580

D655

W635

Q975

W636

C165

C301

C303

C306

C309

C310

C311

C314

W638

C402

02C5

C654

W652

C726

C423

C718

C716

C717W653

C729

C728

C725

R734

W505

D974

D657

R905

C972

W429

R904

IC301

R162

R988

C910

S

T522

T921

W431

W432

W640

W028

W030

W641

R929

W032

W436

CL003

W061

W062

Q653

W329

R924

W041

R655

W247

C738

C841

R925

Q710

R374

W049

W445

W543

R584

W053

D656

W588

R501

W451

W054

W654

D584

W644

90W5

W657

C529

X302

C321

R312

W645

W066

C322

A

R322

W459

R323

C323

R314

Q302

LF901

W069

W646

W071

W072

C317

D933

L104

W544

65R6

C932

H004

C730

C731

C732

C744

W077

R321

W080

Q301

D427

C429

D302

W087

R158

W090

R159

R160

W092

W094

W095

33C

7C

734

W097

W098

W099

R796

W101

C325

W103

R326

W105

W106R

163

R578

R1

64

R165

W110

W111

W112

W113

IC001

R166

D301

W117

Q161

C1 61

W120

W124

C324

R324

35 C7

C7

36

W129

W130

W227

R325

Y302

C104

C164

R532

D421

W136

W137

R110

C528

W494

W148

D555

W150

W495

C526

W154

R528

R530

W159

C530

W466

R525W162

W591

Q708

W496

W164

W168

W169

W155

C504

W175

W176

W548

W472

W473

W474

R741

W174

R327

W184

W195

W196

W198

W187

W188

W190

W199

W201

W204

W206

W220

W214

W217

D501

R429

R1

61

C426

R979

W596

IC704

R773

W510

W511

R797

W517

W228

W229

R001

Y975

R585

C582

W604

C009

D653

CF162

Y160

D306

D654

IC972

R666

R667

R668

T501

Y161

R521

R962

R961

R964R965

R963

C961

FRONT

( )

( )

B1

TOP

( )

PATTERN DIAGRAMS MAIN PWB PATTERN [AV-14A16, AV-14A16/A, AV-14A16/L]

2-16(No.YA391)(No.YA391)2-15

W114 W411

W605

W479

W412

R582

W603

SCREEN

W337

Q351

Q352

Q353

Q521

Q571

R363

C842

CF102

Q102

R723

D423

D551

D552

D561

D582

R364

R365

D921

D925

D930

D942

D943

W502

Q522

R369

W602

D102

C930

W504

C949

D562

R360

W413

D931

35R9

CP981

CP982

R361

CF103

C651

C981

RY971

IC421

D986

R362

C352

W519

R524

C437

R551

R903

R922

Y972

R552

C991

R980

FR556

R529

R923

R577

C357

C351

R432

R433

Q401

R440

R443

R664

Q974

R526

CF161

R554

R571

R576

Y903

R581

R653

L351

52 L3

R986

L353R662

L354

R921

R981

C551

W648

C114

R933

R934

C723

R701

R444

R991

K351

W336

353R

W003

R354

C436

R987

R355

CP701

C421

C424

C581

C922

C926

K901

R356

Q962

C555

R357

C430

W004

C427C428

C663

R358

C927

C924

C307

R359

C554

C706

C005

C435

C552C659

C945

C946

C948

R366

Y001

C531

C942

C909

C001

C004

C008

C103

C112

C117

C119

W523

W524

PC701

W526

C162

C302

C304

C305

C308

C312

C313

C315C316

C341

W231

R367

C705

R368

C401

C422

C433

C501

C503

C523

C561

C562

C571

C572

C977

C978

C656

C653

C354

C355

C356

C655

C658

TP-E

W647

D305

W476

D701

R351

R661

R702

Q709

Y303

C971

C976 R502

R573

R651

R748

R977

C553

C944

C947

Q961

C929

K902

C941

C931

R352

D705

R750

R928

C993

L001

L002

L103

R574

R345

S3

VA901

W005

R749

L1 01

D706

C901

L551

L941

L942

R531

D707

Q402

Y501

Y502

Q973

D9 73

W611

C904

C905

C925

W612

SK351

R976

Y973

L943

C365

TU001

R901

W613

J003J004

J005

R436

S701

D927

R103

R984

D651

SF102

SF101

IC971

SF122

X301

S702

S703

S704

D554

Q803

H003

H002

D928

Y961

K941

K942

K943

K001

K421

D941

Y503

C907

C992

C525

Y304

Y902

W009

S705

L522

S901

TH901

H001

R346

Q103

R985

W563

C979

Y002

Q572

R906

C366

D985

R806

R815

C805

Q651

Q652

C806

IC702

IC703

C367

D303

W615

D001

IC921

C811

D553

D571

D581

C708

C710

W424

R982

C719

W422

W423

C425

D929

S5

R983

D341

W616

D424

D425

R978

L701

C664

W617

C665

C326

D652

S4

Y976

W173

C527

R654

C166

R002

R003

R004

R102

W618

W620

W656

W623

R109

R111

R112

R113

R114

R115

R116R117

R118

R120

R121

W626

R719

C812

R816

R736

R817

R929

W338

R347

W628

R301

R302

R303

R304 R305

R306

R307

R308

W481

W482

CL005

R348

R313

R341

J002

D982

D983

R810X7

01

K701

Y705

K703

K704

Q702

Q703

FC901

R349

W576

D731

R740

H006

R924

Y301

W011

W566

R925

W012

W014

R401

R421

R422

R423

R424

R425

R426

R4 30

R431

R441

R442

R453

R503

W649

R565R566

R575

R583

W073

F901

Q804

PW

R772

R657

R658

R659

R652

R656

R660

W655

Q981

C657

R7 06

R707R

708

R7

09R710R711

R712

R713

R714

R7

15R7

16

R7

18

TP-47B

R720

R721

IC651

FC902

R725

R726 R727

R728

R729

R730

R731

S2

R737

R738

W016

R739

W017

R742

R802

R807

R811

R746

W631

D901

C707

C709

C711

12C

7

C713

W632

C721

C722

C724

IC701

Q982

W023

C720

D920

R974

C002

C003

C006

C007

W634

W578

C105

C106

C107

C108

C109

C110

C111

C113

C115

C116

C120

C121

C122

C652

W579W580

D655

W635

Q975

R703

W636

C165

01C

3

C303

C306

C309

C310

C311

C314

W638

C402

02C5

C701

C654

W652

C726

C423

18 C7

C716

C717

W653

C729

C7

28

D704

C725

R734

W505

D974

D657C972

W429

R904

IC301

R162

R988

C910

T522

T921

W431

W432

W640

W028

W030

W641

Y904

W032

Y905

W436

CL003

W061

W062

Q653

W329

Y653

Y655

W041

R655

W247

C738

C841

Y654

Q710

R374

W049

W643

W4 45

W543

R584

W053

D656

W588

R501

W451

W054

W654

D584

W644

90W5

W657

C529

X302

C321

R312

W645

W066

C322

A

R322

W459

R323

C323

R314

Q302

LF901

W069

W646

W071

W072

C317

D933

L104

W544

R665

C932

H004

C730

C731

C732

C744

W077

R321

W080

Q301

D427

C429

D302

W087

R158

W090

R159

R160

W092

W094

W095

C733 C734

W097

W098

W099

R796

W101

C325

W103

R326

W105

W106

R163

R578

64 R1

R165

W110

W111

W112W113

IC001

R166

D301

W117

Q161

C1 61

W120

W124

C324R324

C735

C7

36

W129

W130

W227

R325

Y302

C104

C164

R532

D421

W136

W137

R110

C528

W494

W148

D555

W150

W495

C526

W154

R528

R530

W159

C530

W466

R525W162

W591

Q708

W496

W164

W168

W169

W155

C504

W175 W

176

W548

W472

W473

W474

R741

W174

R327

W184

W195

W196

W198

W187

W188 W190

W199

W201

W204

W206W

220

W214

W217

D501

R429

R161

C426

R979

W596

IC704R771

R773

W601

W483

W510

W511

R797

D352

D353

D351

D354

D356

D355

W517W

555

W228

W229

R001

Y975

R585

C582

W604

J006

C009

D653

CF162

Y160

D306

D654

IC972

R666

R667

R668

T501

TP-47G/R

TP-47R/G

Y161

R521

R962

R961

R964R965

R963

C961

FRONT

( )

( )

B1

TOP

( )

MAIN PWB PATTERN [AV-14FMG6B/G]

(No.YA391)2-17 2-18(No.YA391)

<MAIN PWB>MODE DC (V)PIN NO.

MODE DC (V)PIN NO.MODE DC (V)PIN NO.

IC301 1 0 2 4.4 3 6.3 4 3.4 5 0 6 5.0 7 5.0 8 5.5 9 9.0 10 3.0 11 3.0 12 3.0 13 0 14 2.8 15 4.2 16 9.0 17 3.8 18 2.8 19 2.8 20 0 21 0 22 0 23 4.4 24 3.2 25 3.0 26 3.5 27 4.2 28 3.7 29 4.1 30 3.9 31 4.2 32 4.2 33 9.0 34 4.0 35 4.7 36 4.0 37 6.1 38 4.2 39 4.3 40 2.7 41 6.2 42 1.0 43 3.7 44 3.9 45 1.2 46 3.1 47 5.4 48 5.0 49 0.7 50 0 51 4.4 52 0.7 IC421 1 3.7 2 26.0 3 2.0 4 0 5 13.8 6 26.3 7 3.7 IC651 1 12.5 2 5.6 3 0 4 2.4 5 9.4 6 9.6 7 0 8 9.7 9 19.9 IC701 1 4.5 2 4.9 3 0 4 0 5 0 6 4.9 7 4.9 8 2.3 9 3.0 10 4.9 11 0 12 0 13 2.4 14 0.1 15 1.8 16 1.8 17 0 18 0.8 19 0 20 4.9 21 4.9 22 4.9 23 4.9 24 2.3 25 4.9

26 0 27 4.1 28 4.9 29 0 30 0 31 0 32 0 33 0 34 4.9 35 4.7 36 4.9 37 4.4 38 4.4 39 4.9 40 0 41 2.1 42 0 IC702 1 0 2 0 3 0 4 0 5 4.9 6 4.9 7 0 8 4.9 IC703 1 14.4 2 5.8 3 0 4 4.9 5 4.9 IC704 1 4.5 2 4.9 3 0 IC921 1 314.0 2 NC 3 0 4 0 5 31.8 6 0 7 0.7 IC971 1 12.8 2 9.0 3 0 IC972 1 9.2 2 4.9 3 0 Q102 E 0 C 9.0 B 2.3 Q103 E 0 C 0 B 4.0 Q161 E 2.5 C 8.3 B 3.2 Q301 E 4.6 C 0 B 4.0 Q302 E 4.0 C 9.0 B 4.6 Q401 E 0 C 0 B 5.4 Q402 E 0 C 4.9 B 0 Q521 E 0 C 9.7 B 0.3 Q522 E 0 C 115.3 B 0 Q571 E 115.5 C 0 B 115.1 Q572 E 0 C 4.9 B 0

Q651 E 0 C 0.3 B 0 Q652 E 0 C 1.0 B 0.6 Q653 E 15.1 C 0 B 15.2 Q702 E 0 C 4.2 B 0 Q703 E 0 C 4.8 B 0.1 Q708 E 0 C 2.0 B 0 Q710 E 0 C 0.1 B 0 Q803 E 0 C 8.1 B 4.7 Q804 E 0 C 0 B 0.1 Q974 E 15.3 C 15.1 B 0 Q975 E 0 C 0.1 B 4.3 TU001 1 4.6 2 NC 3 0 4 4.4 5 0 6 4.5 7 4.9 8 0 9 31.3 10 NC 11 0

<CRT SOCKET PWB>MODE DC (V)PIN NO.

Q351 E 2.5 C 125.8 B 3.2 Q352 E 2.6 C 123.3 B 3.3 Q353 E 2.5 C 128.5 B 3.2

VOLTAGE CHARTS WAVEFORMS

-MAIN PWB-(SHEET1)

-CRT SOCKET PWB-

IC301-10

3.5 Vp-p

(H)IC301-11

3.5 Vp-p

(H)IC301-12

4.0 Vp-p

(H)IC301-14

0.35 Vp-p

(1µs)IC301-36

3.0 Vp-p

(H)IC301-40

0.5 Vp-p

(1µs)IC301-42

2.5 Vp-p

(H)

IC301-46

2.5 Vp-p

(V)IC701-27

5.0 Vp-p

(H)IC701-35

5.0 Vp-p

(V)

IC421-1

0.6 Vp-p

(V)IC421-3

30 Vp-p

(V)IC421-5

60 Vp-p

(V)IC421-6

30 Vp-p

(V)Q521-C

38 Vp-p

(H)Q521-B

1.5 Vp-p

(H)Q522-C

1000Vp-p

(H)

Q522-B

2.0 Vp-p

(H)T522-1

1000 Vp-p

(H)T522-3

55Vp-p

(H) (H)(H)T522-5

220 Vp-p

T522-9

220Vp-p

(H)T522-7

25 Vp-p

Q351-C Q352-C Q353-C

110 Vp-p

(H)

120 Vp-p

(H) (H)

120 Vp-p

(SHEET2)

(SHEET2)

(No.YA391)

CRT Display Category 12, 3-chome, Moriya-cho, Kanagawa-ku, Yokohama-city, Kanagawa-prefecture, 221-8528, JapanVictor Company of Japan, Limited

VPTPrinted in Japan

(No.YA391)3-1

PARTS LISTCAUTION

The parts identified by the symbol are important for the safety . Whenever replacing these parts, be sure to use specified ones to secure the safety.

The parts not indicated in this Parts List and those which are filled with lines --- in the Parts No. columns will not be supplied.

P.W. BOARD Ass'y will not be supplied, but those which are filled with the Parts No. in the Parts No. columns will be supplied.

ABBREVIATIONS OF RESISTORS, CAPACITORS AND TOLERANCES

RESISTORS CAPACITORS

CR Carbon Resistor C CAP. Ceramic Capacitor

FR Fusible Resistor E CAP. Electrolytic Capacitor

PR Plate Resistor M CAP. Mylar Capacitor

VR Variable Resistor CH CAP. Chip Capacitor

HV R High Voltage Resistor HV CAP. High Voltage Capacitor

MF R Metal Film Resistor MF CAP. Metalized Film Capacitor

MG R Metal Glazed Resistor MM CAP. Metalized Mylar Capacitor

MP R Metal Plate Resistor MP CAP. Metalized Polystyrol Capacitor

OM R Metal Oxide Film Resistor PP CAP. Polypropylene Capacitor

CMF R Coating Metal Film Resistor PS CAP. Polystyrol Capacitor

UNF R Non-Flammable Resistor TF CAP. Thin Film Capacitor

CH V R Chip Variable Resistor MPP CAP. Metalized Polypropylene Capacitor

CH MG R Chip Metal Glazed Resistor TAN. CAP. Tantalum Capacitor

COMP. R Composition Resistor CH C CAP. Chip Ceramic Capacitor

LPTC R Linear Positive Temperature Coefficient Resistor BP E CAP. Bi-Polar Electrolytic Capacitor

CH AL E CAP. Chip Aluminum Electrolytic Capacitor

CH AL BP CAP. Chip Aluminum Bi-Polar Capacitor

CH TAN. E CAP. Chip Tantalum Electrolytic Capacitor

CH AL BP E CAP. Chip Tantalum Bi-Polar Electrolytic Capacitor

RESISTORS

F G J K M N R H Z P

±1% ±2% ±5% ±10% ±20% ±30% +30%-10%

+50%-10%

+80%-20%

+100%-0%

3-2(No.YA391)

CONTENTSUSING P.W. BOARD & REMOTE CONTROL UNIT ................................................................................................... 3-3EXPLODED VIEW PARTS LIST -1 [AV-14A16, AV-14A16/A ,AV-14A16/L] ............................................................. 3-3EXPLODED VIEW -1 [AV-14A16, AV-14A16/A ,AV-14A16/L] ................................................................................... 3-4EXPLODED VIEW PARTS LIST -2 [AV-14FMG6B/G] ............................................................................................... 3-5EXPLODED VIEW -2 [AV-14FMG6B/G] ..................................................................................................................... 3-6

PRINTED WIRING BOARD PARTS LIST [AV-14A16] ............................................................................................... 3-7MAIN P.W. BOARD ASS'Y (SCG-1552A-H2) .................................................................................................... 3-7

PRINTED WIRING BOARD PARTS LIST [AV-14A16/A] ......................................................................................... 3-10MAIN P.W. BOARD ASS'Y (SCG-1555A-H2) .................................................................................................. 3-10

PRINTED WIRING BOARD PARTS LIST [AV-14A16/L] .......................................................................................... 3-13MAIN P.W. BOARD ASS'Y (SCG-1553A-H2) .................................................................................................. 3-13

PRINTED WIRING BOARD PARTS LIST [AV-14FMG6B/G] ................................................................................... 3-16MAIN P.W. BOARD ASS'Y (SCG-1544A-H2) .................................................................................................. 3-16

REMOTE CONTROL UNIT PARTS LIST (RM-C360GY-1H) ................................................................................... 3-19PACKING [AV-14A16, AV-14A16/A ,AV-14A16/L] .................................................................................................. 3-19PACKING PARTS LIST [AV-14A16, AV-14A16/A ,AV-14A16/L] ............................................................................ 3-19PACKING [AV-14FMG6B/G] ..................................................................................................................................... 3-20PACKING PARTS LIST [AV-14FMG6B/G] ............................................................................................................... 3-20

(No.YA391)3-3

USING P.W. BOARD & REMOTE CONTROL UNIT

EXPLODED VIEW PARTS LIST -1 [AV-14A16, AV-14A16/A ,AV-14A16/L]

P.W.B ASS'Y AV-14A16 AV-14A16/A AV-14A16/L AV-14FMG6B/GMAIN P.W.B SCG-1552A-H2 SCG-1555A-H2 SCG-1553A-H2 SCG-1544A-H2

REMOTE CONTROL UNIT RM-C360GY-1H ← ← ←

Ref.No. Part No. Part Name Description Local

V01 A34JXV70X03BN10 PICTURE TUBE Inc.DEF YOKE, PC MAGNET AV-14A16 V01 A34JXV70X03BS50 PICTURE TUBE Inc.DEF YOKE, PC MAGNET AV-14A16A V01 A34JXV70X03BS15 PICTURE TUBE Inc.DEF YOKE, PC MAGNET AV-14A16L L01 QQW0171-001 DEG COIL T522 QQH0168-001 FB TRANSF

1 QYSBSFG4016ZA TAP SCREW M4 x 16mm(x4) 2 QYSBSF3010ZA TAP SCREW M3 x 10mm 3 QYSBSFG4012MA TAP SCREW M4 x 12mm

4 LC10165-009A-H REAR COVER 5 CM47005-A01-H POWER CORD CLAMP 6 QMPR340-165-K2 POWER CORD 1.65m BLACK AV-14A16,AV-14A16L 6 QMPG120-170-JC POWER CORD(AST) 1.7m BLACK AV-14A16A

7 LC30348-003A-H POWER KNOB 8 LC30347-003A-H CONTROL KNOB 9 LC30346-001B-H REMOCON LENS 10 WJY0013-010A-E BRAIDED ASS'Y 11 A48457-3-H SPRING 12 QAS0274-001 SPEAKER SP01 13 LC30345-001B-H SP HOLDER

14 LC10164-035A-H FRONT CABINET 15 GG40044-001A-M SIRIM LABEL AV-14A16L

20 SCG-1552A-H2 MAIN PWB AV-14A16 20 SCG-1555A-H2 MAIN PWB AV-14A16A 20 SCG-1553A-H2 MAIN PWB AV-14A16L

3-4(No.YA391)

EXPLODED VIEW -1 [AV-14A16, AV-14A16/A ,AV-14A16/L]

15

3

2

1

4

6

57

9 8

13

12

10

20

14

20

MAIN PWB

CRT SOCKET PWB

(Within MAIN PWB)

T522

V01

L01

11

RATING LABEL

(No.YA391)3-5

EXPLODED VIEW PARTS LIST -2 [AV-14FMG6B/G] Ref.No. Part No. Part Name Description Local

V01 A34JXV70X03BN10 PICTURE TUBE Inc.DEF YOKE, PC MAGNET L01 QQW0171-001 DEG COIL T522 QQH0168-001 FB TRANSF

1 LC10831-050A-H FRONT CABINET 2 CM46880-002-H JVC MARK 3 LC30617-001C-H E.E.WINDOW 4 LC30616-001B-H POWER KNOB 5 CM35235-003-H SPRING 6 LC20292-001A-H CONTROL KNOB 7 LC30618-001B-H LED LENS 11 QYSBSFG4016ZA TAP SCREW M4 x 16mm(x4) 12 QYSBSF3010ZA TAP SCREW M3 x 10mm 13 QYSBSFG4012MA TAP SCREW M4 x 12mm

14 CM12961-010-H REAR COVER 15 CM47005-A01-H POWER CORD CLAMP 16 QMPR340-165-K2 POWER CORD 1.65m BLACK

17 A48457-3-H SPRING 18 WJY0013-010A-E BRAIDED ASS'Y 19 QYSBSF4012ZA TAP SCREW M4 x 12mm(x8) 20 QAS0347-001 SPEAKER (x2) SP01,SP02

30 SCG-1544A-H2 MAIN PWB

3-6(No.YA391)

EXPLODED VIEW -2 [AV-14FMG6B/G]

RATING LABEL

1

2

34

5

67

11

13

12

14

15

16

1920

19

20

T522

V01

L01

18

17

CRT SOCKET PWB

(Within MAIN PWB)30

30 MAIN PWB

(No.YA391)3-7

PRINTED WIRING BOARD PARTS LIST [AV-14A16] MAIN P.W. BOARD ASS'Y (SCG-1552A-H2)Ref No. Part No. Part Name Description Local

IC301 NN5198K ICIC421 LA78040N ICIC651 AN5265 ICIC701 MN1873287JL1 ICIC702 ATE08-21YMG6 IC (SERVICE)IC703 L78LR05E-MA ICIC704 GP1UM281QK IR DETECT UNIT 38kHzIC921 STR-W5753A/F5 ICIC971 L7809CP ICIC972 L7805CP IC

Q102 2SC5397/CD/-T TRANSISTORQ301 2SA1530A/QR/-X TRANSISTORQ302 2SC3928A/QR/-X TRANSISTORQ351 2SC4015/N/-T TRANSISTORQ352 2SC4015/N/-T TRANSISTORQ353 2SC4015/N/-T TRANSISTORQ401 DTC124ESA-T DIGI TRANSISTORQ402 2SC3928A/QR/-X TRANSISTORQ521 2SC2655/Y/-T TRANSISTOR

Q522 TT2140LS-YB11 POW TRANSISTORQ571 2SA1208/ST/Z1-T TRANSISTORQ572 2SC3928A/QR/-X TRANSISTORQ651 2SC3928A/QR/-X TRANSISTORQ652 2SC3928A/QR/-X TRANSISTORQ653 2SA1530A/QR/-X TRANSISTORQ702 2SC3928A/QR/-X TRANSISTORQ703 2SC3928A/QR/-X TRANSISTORQ708 UN2212-X DIGI TRANSISTORQ710 UN2212-X DIGI TRANSISTORQ803 KTC3199/YG/-T TRANSISTORQ804 2SC3928A/QR/-X TRANSISTORQ974 2SA966/OY/-T TRANSISTORQ975 UN2212-X DIGI TRANSISTOR

D001 MTZJ33A-T2 Z DIODED301 MTZJ9.1B-T2 Z DIODED302 MTZJ9.1B-T2 Z DIODED303 MA3091/M/-X Z DIODED305 1K4-T2 SB DIODED306 QRE121J-561Y C RESISTOR 560Ω 1/2W JD306 or QRE122J-561 C RESISTOR 560Ω 1/2W JD306 or QRG01GJ-561 OMF RESISTOR 560Ω 1W JD341 MA111-X SI DIODED421 MTZJ75-T2 Z DIODED423 1SR124-400A-T2 SI DIODED425 MA111-X SI DIODED427 MTZJ27B-T2 Z DIODED501 MTZJ6.8C-T2 Z DIODED551 FR105GT-T3 SI DIODED552 FR105GT-T3 SI DIODED553 MTZJ9.1B-T2 Z DIODED554 MA111-X SI DIODED571 MTZJ7.5S-T2 Z DIODED581 MTZJ20B-T2 Z DIODED582 FR105GT-T3 SI DIODED651 MA111-X SI DIODED652 MTZJ12C-T2 Z DIODED653 MA111-X SI DIODED654 MTZJ12C-T2 Z DIODED655 MA111-X SI DIODED656 MA111-X SI DIODED657 MA111-X SI DIODED703 SPR-39MVWF LED POWER,ON TIMER(RED-GREEN)D707 MA111-X SI DIODED731 MA111-X SI DIODED920 1SS133-T2 SI DIODED921 FR105GT-T3 SI DIODED925 FR105GT-T3 SI DIODED927 MTZJ36A-T2 Z DIODED928 MTZJ3.3A-T2 Z DIODED930 FR107GT-T3 SI DIODED931 MA111-X SI DIODED933 MTZJ16C-T2 Z DIODED941 RU3AM-LFC4 SI DIODED942 ERC30-02L38E SI DIODED943 FR105GT-T3 SI DIODED982 MA111-X SI DIODED983 MA111-X SI DIODE

C001 QETN1HM-106Z E CAPACITOR 10uF 50V MC002 NCB31HK-103X C CAPACITOR 0.01uF 50V K

C004 QETN1CM-477Z E CAPACITOR 470uF 16V MC005 QFVF1HJ-104Z MF CAPACITOR 0.1uF 50V JC008 QETN1HM-475Z E CAPACITOR 4.7uF 50V MC103 QETN1EM-476Z E CAPACITOR 47uF 25V MC104 NCB31HK-472X C CAPACITOR 4700pF 50V KC105 NCB31HK-472X C CAPACITOR 4700pF 50V KC106 NCB31HK-472X C CAPACITOR 4700pF 50V KC107 NCB31HK-472X C CAPACITOR 4700pF 50V KC110 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JC112 QETN1EM-476Z E CAPACITOR 47uF 25V MC113 NCB31HK-472X C CAPACITOR 4700pF 50V KC115 NCB31HK-103X C CAPACITOR 0.01uF 50V KC116 NCB31HK-103X C CAPACITOR 0.01uF 50V KC117 QFVF1HJ-224Z MF CAPACITOR 0.22uF 50V JC119 QETN1HM-474Z E CAPACITOR 0.47uF 50V MC120 NDC31HJ-121X C CAPACITOR 120pF 50V JC121 NCB31HK-103X C CAPACITOR 0.01uF 50V KC122 NCB31HK-103X C CAPACITOR 0.01uF 50V KC162 NCB31HK-152X C CAPACITOR 1500pF 50V KC301 NCB31HK-681X C CAPACITOR 680pF 50V KC302 QETN1HM-475Z E CAPACITOR 4.7uF 50V MC303 NDC31HJ-100X C CAPACITOR 10pF 50V JC304 QFVF1HJ-474Z MF CAPACITOR 0.47uF 50V JC305 QETN1HM-474Z E CAPACITOR 0.47uF 50V MC306 NCB31HK-103X C CAPACITOR 0.01uF 50V KC307 QETN1CM-477Z E CAPACITOR 470uF 16V MC308 QETN1CM-107Z E CAPACITOR 100uF 16V MC309 NCB31HK-103X C CAPACITOR 0.01uF 50V KC310 NDC31HJ-221X C CAPACITOR 220pF 50V JC311 NCB31HK-103X C CAPACITOR 0.01uF 50V KC312 QENC1HM-474Z BP E CAPACITOR 0.47uF 50V MC313 QETN1HM-335Z E CAPACITOR 3.3uF 50V MC314 NCB31HK-103X C CAPACITOR 0.01uF 50V KC315 QETN1CM-107Z E CAPACITOR 100uF 16V MC316 QETN1HM-106Z E CAPACITOR 10uF 50V MC317 NCB31EK-473X C CAPACITOR 0.047uF 25V KC321 NDC31HJ-120X C CAPACITOR 12pF 50V JC322 NCB31EK-273X C CAPACITOR 0.027uF 25V KC323 QETN1HM-474Z E CAPACITOR 0.47uF 50V MC324 QETN1HM-106Z E CAPACITOR 10uF 50V MC325 QENC1HM-106Z BP E CAPACITOR 10uF 50V MC326 NCS21HJ-221X C CAPACITOR 220pF 50V JC341 QETN1HM-106Z E CAPACITOR 10uF 50V MC352 QFZ0097-103 MM CAPACITOR 0.01uF 1250V KC354 NDC31HJ-271X C CAPACITOR 270pF 50V JC355 NDC31HJ-221X C CAPACITOR 220pF 50V JC356 NDC31HJ-331X C CAPACITOR 330pF 50V JC357 QETN1AM-477Z E CAPACITOR 470uF 10V MC365 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC366 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC367 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC401 QFVF1HJ-474Z MF CAPACITOR 0.47uF 50V JC423 QCS32HJ-180Z C CAPACITOR 18pF 500V JC424 QFLC2AJ-103Z M CAPACITOR 0.01uF 100V JC426 QFLC1HJ-102Z M CAPACITOR 1000pF 50V JC427 QETN1VM-107Z E CAPACITOR 100uF 35V MC428 QETN1VM-107Z E CAPACITOR 100uF 35V MC429 QETN1HM-106Z E CAPACITOR 10uF 50V MC430 QFN32AJ-472Z M CAPACITOR 4700pF 100V JC433 QEHR1HM-475Z E CAPACITOR 4.7uF 50V MC435 QETM1EM-228 E CAPACITOR 2200uF 25V MC436 QFVF1HJ-334Z MF CAPACITOR 0.33uF 50V JC437 NCB31HK-104X C CAPACITOR 0.1uF 50V KC501 QETN1EM-476Z E CAPACITOR 47uF 25V MC502 NCB31HK-103X C CAPACITOR 0.01uF 50V KC503 QETN1HM-106Z E CAPACITOR 10uF 50V MC523 QETN1EM-476Z E CAPACITOR 47uF 25V MC525 QFZ0200-802 MPP CAPACITOR 8000pF 1.5kV HC526 QFLC1HJ-103Z M CAPACITOR 0.01uF 50V JC527 QFZ0197-684 MPP CAPACITOR 0.68uF 250V JC529 QFN32AJ-102Z M CAPACITOR 1000pF 100V JC531 QEZ0203-107 E CAPACITOR 100uF 160V MC552 QETM1VM-108 E CAPACITOR 1000uF 35V MC554 QETN2EM-475Z E CAPACITOR 4.7uF 250V MC555 QFLC2AJ-104Z M CAPACITOR 0.1uF 100V JC571 QETN1AM-107Z E CAPACITOR 100uF 10V MC572 QETN1EM-476Z E CAPACITOR 47uF 25V MC581 QFVF1HJ-104Z MF CAPACITOR 0.1uF 50V JC652 NCB31HK-473X C CAPACITOR 0.047uF 50V KC653 QETN1HM-106Z E CAPACITOR 10uF 50V MC654 QETN1CM-477Z E CAPACITOR 470uF 16V MC655 QETN1HM-106Z E CAPACITOR 10uF 50V MC656 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC657 QETN1EM-107Z E CAPACITOR 100uF 25V M

Ref No. Part No. Part Name Description Local

3-8(No.YA391)

C658 QETN1EM-227Z E CAPACITOR 220uF 25V MC659 QETN1HM-475Z E CAPACITOR 4.7uF 50V MC663 NCB31HK-102X C CAPACITOR 1000pF 50V KC664 QETN1CM-107Z E CAPACITOR 100uF 16V MC665 NCB31HK-103X C CAPACITOR 0.01uF 50V KC705 QETN1CM-477Z E CAPACITOR 470uF 16V MC706 NCB31HK-104X C CAPACITOR 0.1uF 50V KC707 NCB31HK-103X C CAPACITOR 0.01uF 50V KC708 QETN1AM-108Z E CAPACITOR 1000uF 10V MC709 NCB31HK-103X C CAPACITOR 0.01uF 50V KC710 QETN1CM-107Z E CAPACITOR 100uF 16V MC711 NCB31HK-103X C CAPACITOR 0.01uF 50V KC712 NCB31HK-103X C CAPACITOR 0.01uF 50V KC713 NCB31HK-103X C CAPACITOR 0.01uF 50V KC716 NDC31HJ-181X C CAPACITOR 180pF 50V JC717 NDC31HJ-181X C CAPACITOR 180pF 50V JC718 NCB31HK-103X C CAPACITOR 0.01uF 50V KC719 QETN1HM-105Z E CAPACITOR 1uF 50V MC720 NCB31HK-103X C CAPACITOR 0.01uF 50V KC721 NCB31EK-333X C CAPACITOR 0.033uF 25V KC722 NDC31HJ-101X C CAPACITOR 100pF 50V JC723 NDC31HJ-560X C CAPACITOR 56pF 50V JC724 NDC31HJ-560X C CAPACITOR 56pF 50V JC728 NDC31HJ-181X C CAPACITOR 180pF 50V JC729 NDC31HJ-181X C CAPACITOR 180pF 50V JC730 NCB31HK-103X C CAPACITOR 0.01uF 50V KC744 NCB31HK-103X C CAPACITOR 0.01uF 50V KC805 QETN1CM-227Z E CAPACITOR 220uF 16V MC806 QETN1CM-477Z E CAPACITOR 470uF 16V MC811 QETN1HM-106Z E CAPACITOR 10uF 50V MC841 NCB31HK-152X C CAPACITOR 1500pF 50V K

C901 QFZ9073-224 MM CAPACITOR 0.22uF AC250V MC904 QCZ9054-102 C CAPACITOR 1000pF AC250V ZC905 QCZ9054-102 C CAPACITOR 1000pF AC250V ZC907 QCZ9054-102 C CAPACITOR 1000pF AC250V Z

C909 QEZ0633-127 E CAPACITOR 120uF 450V MC910 QFZ9072-473 MM CAPACITOR 0.047uF AC250V K

C922 QFLC1HJ-104Z M CAPACITOR 0.1uF 50V JC924 QETN1HM-475Z E CAPACITOR 4.7uF 50V MC925 QETN1VM-476Z E CAPACITOR 47uF 35V MC926 QFLC1HJ-332Z M CAPACITOR 3300pF 50V JC927 NCB31HK-104X C CAPACITOR 0.1uF 50V KC929 QFKA2JK-103 MM CAPACITOR 0.01uF 630V KC931 QCZ0364-681 C CAPACITOR 680pF 2kV KC932 NDC31HJ-221X C CAPACITOR 220pF 50V JC941 QCZ0364-561 C CAPACITOR 560pF 2kV KC942 QEZ0203-107 E CAPACITOR 100uF 160V MC944 QCB32HK-222Z C CAPACITOR 2200pF 500V KC945 QEHR1EM-108Z E CAPACITOR 1000uF 25V MC946 QEHR1EM-108Z E CAPACITOR 1000uF 25V MC947 QCB32HK-222Z C CAPACITOR 2200pF 500V KC948 QETN1EM-108Z E CAPACITOR 1000uF 25V MC949 NDC31HJ-471X C CAPACITOR 470pF 50V JC976 QETN1EM-227Z E CAPACITOR 220uF 25V MC977 QEHR1CM-227Z E CAPACITOR 220uF 16V MC978 QETN1EM-227Z E CAPACITOR 220uF 25V MC979 QETN1AM-227Z E CAPACITOR 220uF 10V M

C991 QCZ9071-102 C CAPACITOR 1000pF AC400V MC992 QCZ9071-102 C CAPACITOR 1000pF AC400V MC993 QCZ9071-152 C CAPACITOR 1500pF AC400V M

R002 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR003 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR004 NRSA63J-563X MG RESISTOR 56kΩ 1/16W JR102 NRSA63J-750X MG RESISTOR 75Ω 1/16W JR103 NRSA63J-100X MG RESISTOR 10Ω 1/16W JR109 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR110 NRSA63J-272X MG RESISTOR 2.7kΩ 1/16W JR111 NRSA63J-181X MG RESISTOR 180Ω 1/16W JR112 NRSA63J-100X MG RESISTOR 10Ω 1/16W JR113 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR120 NRSA63J-391X MG RESISTOR 390Ω 1/16W JR121 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR159 NRSA63J-184X MG RESISTOR 180kΩ 1/16W JR301 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR302 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR303 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR304 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR305 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR306 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR307 NRSA63J-122X MG RESISTOR 1.2kΩ 1/16W JR308 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR312 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR313 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR314 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR321 NRSA63J-152X MG RESISTOR 1.5kΩ 1/16W JR322 NRSA63J-272X MG RESISTOR 2.7kΩ 1/16W J


R323 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR324 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR326 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR327 NRSA63J-475X MG RESISTOR 4.7MΩ 1/16W JR341 NRSA63J-332X MG RESISTOR 3.3kΩ 1/16W JR345 NRSA63J-151X MG RESISTOR 150Ω 1/16W JR346 NRSA63J-151X MG RESISTOR 150Ω 1/16W JR353 NRSA63J-151X MG RESISTOR 150Ω 1/16W JR354 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR355 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR356 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR357 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR358 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR359 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR360 QRZ0107-152Z C RESISTOR 1.5kΩ 1/2W KR361 QRZ0107-152Z C RESISTOR 1.5kΩ 1/2W KR362 QRZ0107-152Z C RESISTOR 1.5kΩ 1/2W KR363 QRL029J-123 OMF RESISTOR 12kΩ 2W JR364 QRL029J-123 OMF RESISTOR 12kΩ 2W JR365 QRL029J-123 OMF RESISTOR 12kΩ 2W JR366 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR367 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR368 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR374 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR401 NRSA02J-103X MG RESISTOR 10kΩ 1/10W JR421 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR423 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR424 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR425 NRSA63J-332X MG RESISTOR 3.3kΩ 1/16W JR426 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR429 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR430 NRSA63J-823X MG RESISTOR 82kΩ 1/16W JR431 NRSA02J-103X MG RESISTOR 10kΩ 1/10W JR432 QRE121J-3R9Y C RESISTOR 3.9Ω 1/2W JR433 QRE121J-3R9Y C RESISTOR 3.9Ω 1/2W JR436 NRSA63J-823X MG RESISTOR 82kΩ 1/16W JR440 QRG01GJ-221 OMF RESISTOR 220Ω 1W JR441 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W JR442 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR443 QRE121J-1R0Y C RESISTOR 1Ω 1/2W JR453 NRSA63J-272X MG RESISTOR 2.7kΩ 1/16W JR502 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR503 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR525 QRL029J-680 OMF RESISTOR 68Ω 2W JR526 QRE121J-271Y C RESISTOR 270Ω 1/2W JR529 QRL039J-221 OMF RESISTOR 220Ω 3W JR531 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR532 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J

R551 QRX029J-R47 MF RESISTOR 0.47Ω 2W JR552 QRJ146J-2R2X UNF C RESISTOR 2.2Ω 1/4W JR554 QRE121J-681Y C RESISTOR 680Ω 1/2W JR571 QRE121J-272Y C RESISTOR 2.7kΩ 1/2W JR573 QRT029J-2R2 MF RESISTOR 2.2Ω 2W JR574 QRT029J-2R2 MF RESISTOR 2.2Ω 2W JR576 QRE121J-223Y C RESISTOR 22kΩ 1/2W JR577 NRSA63J-562X MG RESISTOR 5.6kΩ 1/16W JR578 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR581 QRE121J-182Y C RESISTOR 1.8kΩ 1/2W JR582 NRSA63J-273X MG RESISTOR 27kΩ 1/16W JR583 NRSA63J-393X MG RESISTOR 39kΩ 1/16W JR651 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR652 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR653 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR654 NRSA63J-223X MG RESISTOR 22kΩ 1/16W JR655 NRSA63J-473X MG RESISTOR 47kΩ 1/16W JR656 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W JR657 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR658 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR659 QRE121J-4R7Y C RESISTOR 4.7Ω 1/2W JR660 NRSA63J-153X MG RESISTOR 15kΩ 1/16W JR661 QRE121J-271Y C RESISTOR 270Ω 1/2W JR662 QRE121J-271Y C RESISTOR 270Ω 1/2W JR664 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR665 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR666 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR667 QRE121J-101Y C RESISTOR 100Ω 1/2W JR668 QRT029J-5R6 MF RESISTOR 5.6Ω 2W JR706 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR707 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR708 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR709 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR710 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR711 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR712 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR713 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR714 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR715 NRSA63J-221X MG RESISTOR 220Ω 1/16W J


(No.YA391)3-9

R716 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR718 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR719 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR720 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR721 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR723 QRL039J-270 OMF RESISTOR 27Ω 3W JR725 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR726 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR727 NRSA63J-153X MG RESISTOR 15kΩ 1/16W JR728 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR729 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR730 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR731 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR736 NRSA63J-823X MG RESISTOR 82kΩ 1/16W JR737 NRSA63J-104X MG RESISTOR 100kΩ 1/16W JR738 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR739 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR740 NRSA63J-392X MG RESISTOR 3.9kΩ 1/16W JR741 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR742 NRSA63J-563X MG RESISTOR 56kΩ 1/16W JR746 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR748 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR749 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR772 NRSA63J-391X MG RESISTOR 390Ω 1/16W JR773 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR796 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR797 NRSA63J-153X MG RESISTOR 15kΩ 1/16W JR802 NRSA63J-750X MG RESISTOR 75Ω 1/16W JR806 QRE121J-271Y C RESISTOR 270Ω 1/2W JR807 NRSA63J-680X MG RESISTOR 68Ω 1/16W JR810 QRG01GJ-560 OMF RESISTOR 56Ω 1W JR811 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR815 QRE121J-181Y C RESISTOR 180Ω 1/2W JR816 NRSA63J-681X MG RESISTOR 680Ω 1/16W JR817 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR901 QRF074K-4R7 UNF WW RESISTOR 4.7Ω 7W KR903 QRL029J-104 OMF RESISTOR 100kΩ 2W JR906 QRL029J-104 OMF RESISTOR 100kΩ 2W JR921 QRE121J-1R8Y C RESISTOR 1.8Ω 1/2W JR922 QRE121J-221Y C RESISTOR 220Ω 1/2W JR923 QRZ0237-R18 UNF WW RESISTOR 0.18Ω 3W JR924 NRSA63J-154X MG RESISTOR 150kΩ 1/16W JR925 NRSA63J-105X MG RESISTOR 1MΩ 1/16W JR928 QRL039J-683 OMF RESISTOR 68kΩ 3W JR933 QRE121J-4R7Y C RESISTOR 4.7Ω 1/2W JR934 NRSA63J-683X MG RESISTOR 68kΩ 1/16W JR935 QRE121J-392Y C RESISTOR 3.9kΩ 1/2W JR974 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR976 QRL029J-120 OMF RESISTOR 12Ω 2W JR977 QRE121J-122Y C RESISTOR 1.2kΩ 1/2W JR978 NRSA63J-473X MG RESISTOR 47kΩ 1/16W JR979 QRL039J-470 OMF RESISTOR 47Ω 3W JR980 QRL029J-183 OMF RESISTOR 18kΩ 2W J

R991 QRZ9046-825Z C RESISTOR 8.2MΩ 1/2W K

L001 QQL244K-8R2Z PEAKING COIL 8.2uH KL101 QQL244J-2R2Z PEAKING COIL 2.2uH JL103 QQL244K-8R2Z PEAKING COIL 8.2uH KL551 QQLZ026-220 COIL 22uH ±7%L701 QQL244J-5R6Z COIL 5.6uH JL941 QQL26AK-820Z CHOKE COIL 82uH KL942 QQL244J-4R7Z PEAKING COIL 4.7uH JL943 QQL244J-4R7Z PEAKING COIL 4.7uH JT501 QQR1522-001 DRIVE TRANSF

T921 QQS0213-001 SW TRANSF

CP981 ICP-N50-T IC PROTECTOR 2.0ACP982 ICP-N75-T IC PROTECTOR 2.7AF901 QMF51E2-3R15-S FUSE 3.15A AC250V

J002 QNN0384-001 PIN JACK VIDEO,AUDIO IN/OUT(REAR)J003 QNN0281-003 PIN JACK VIDEO IN(FRONT)J004 QNN0281-002 PIN JACK AUDIO IN(FRONT)J005 QNS0197-001 3.5 JACK HEADPHONEK351 QQR0621-002Z FERRITE BEADSK421 QQR1113-001Z FERRITE BEADSK901 QQR1113-001Z FERRITE BEADSK902 QQR1113-001Z FERRITE BEADSK941 QQR1113-001Z FERRITE BEADSK942 QQR1113-001Z FERRITE BEADSK943 QQR1113-001Z FERRITE BEADS

LF901 QQR0673-002 LINE FILTERS701 QSW0619-003Z PUSH SWITCH VOL+S702 QSW0619-003Z PUSH SWITCH VOL-S703 QSW0619-003Z PUSH SWITCH CH+S704 QSW0619-003Z PUSH SWITCH CH-S705 QSW0619-003Z PUSH SWITCH MENU

S901 QSW0750-001 PUSH SWITCH POWER


SF102 QAX0666-002 SAW FILTERSF122 QAX0325-001 SAW FILTER

SK351 QNZ0796-001 CRT SOCKETTH901 QAD0121-9R0 P THERMISTOR 9Ω

TU001 QAU0246-002 TUNERVA901 QAF0072-621 VARISTOR 620V

X301 QAX0705-001Z CRYSTAL 4.433619MHzX302 QAX0860-001Z CRYSTAL 3.579545MHzX701 QAX0884-001 C RESONATOR 12.000MHz

LC30349-001A-H LED HOLDER


3-10(No.YA391)

PRINTED WIRING BOARD PARTS LIST [AV-14A16/A] MAIN P.W. BOARD ASS'Y (SCG-1555A-H2)Ref No. Part No. Part Name Description Local








(No.YA391)3-11



C909 QEZ0476-127 E CAPACITOR 120uFC910 QFZ9072-473 MM CAPACITOR 0.047uF AC250V K








3-12(No.YA391)
















(No.YA391)3-13

PRINTED WIRING BOARD PARTS LIST [AV-14A16/L] MAIN P.W. BOARD ASS'Y (SCG-1553A-H2)Ref No. Part No. Part Name Description Local








3-14(No.YA391)











(No.YA391)3-15
















3-16(No.YA391)

PRINTED WIRING BOARD PARTS LIST [AV-14FMG6B/G] MAIN P.W. BOARD ASS'Y (SCG-1544A-H2)Ref No. Part No. Part Name Description Local

IC301 NN5198K ICIC421 LA78040N ICIC651 AN5265 ICIC701 MN1873287JJ1 ICIC702 ATE08-21YMG6 IC (SERVICE)IC703 L78LR05E-MA ICIC704 GP1UM281QK IR DETECT UNIT 38kHzIC921 STR-W5753A/F5 ICIC971 L7809CP ICIC972 L7805CP IC

Q102 2SC5397/CD/-T TRANSISTORQ103 UN2212-X DIGI TRANSISTORQ161 2SD601A/QR/-X TRANSISTORQ301 2SA1530A/QR/-X TRANSISTORQ302 2SC3928A/QR/-X TRANSISTORQ351 2SC4015/N/-T TRANSISTORQ352 2SC4015/N/-T TRANSISTORQ353 2SC4015/N/-T TRANSISTORQ401 DTC124ESA-T DIGI TRANSISTORQ402 2SC3928A/QR/-X TRANSISTORQ521 2SC2655/Y/-T TRANSISTOR

Q522 TT2140LS-YB11 POW TRANSISTORQ571 2SA1208/ST/Z1-T TRANSISTORQ572 2SC3928A/QR/-X TRANSISTORQ651 2SC3928A/QR/-X TRANSISTORQ652 2SC3928A/QR/-X TRANSISTORQ653 2SA1530A/QR/-X TRANSISTORQ702 2SC3928A/QR/-X TRANSISTORQ703 2SC3928A/QR/-X TRANSISTORQ708 UN2212-X DIGI TRANSISTORQ803 KTC3199/YG/-T TRANSISTORQ804 2SC3928A/QR/-X TRANSISTORQ974 2SA966/OY/-T TRANSISTORQ975 UN2212-X DIGI TRANSISTOR

D001 MTZJ33A-T2 Z DIODED102 MA859-T2 SI DIODED301 MTZJ9.1B-T2 Z DIODED302 MTZJ9.1B-T2 Z DIODED303 MA3091/M/-X Z DIODED305 1K4-T2 SB DIODED306 QRE121J-561Y C RESISTOR 560Ω 1/2W JD306 or QRE122J-561 C RESISTOR 560Ω 1/2W JD306 or QRG01GJ-561 OMF RESISTOR 560Ω 1W JD341 MA111-X SI DIODED421 MTZJ75-T2 Z DIODED423 1SR124-400A-T2 SI DIODED425 MA111-X SI DIODED427 MTZJ27B-T2 Z DIODED501 MTZJ6.8C-T2 Z DIODED551 FR105GT-T3 SI DIODED552 FR105GT-T3 SI DIODED553 MTZJ9.1B-T2 Z DIODED554 MA111-X SI DIODED571 MTZJ7.5S-T2 Z DIODED581 MTZJ20B-T2 Z DIODED582 FR105GT-T3 SI DIODED651 MA111-X SI DIODED652 MTZJ12C-T2 Z DIODED653 MA111-X SI DIODED654 MTZJ12C-T2 Z DIODED655 MA111-X SI DIODED656 MA111-X SI DIODED657 MA111-X SI DIODED704 LH22440-T16 LED POWER(RED)D705 LE22440-T16 LED ON TIMER(ORG)D707 MA111-X SI DIODED731 MA111-X SI DIODED920 1SS133-T2 SI DIODED921 FR105GT-T3 SI DIODED925 FR105GT-T3 SI DIODED927 MTZJ36A-T2 Z DIODED928 MTZJ3.3A-T2 Z DIODED930 FR107GT-T3 SI DIODED931 MA111-X SI DIODED933 MTZJ16C-T2 Z DIODED941 RU3AM-LFC4 SI DIODED942 ERC30-02L38E SI DIODED943 FR105GT-T3 SI DIODED982 MA111-X SI DIODED983 MA111-X SI DIODE

C001 QETN1HM-106Z E CAPACITOR 10uF 50V MC002 NCB31HK-103X C CAPACITOR 0.01uF 50V KC004 QETN1CM-477Z E CAPACITOR 470uF 16V MC005 QFVF1HJ-104Z MF CAPACITOR 0.1uF 50V JC008 QETN1HM-475Z E CAPACITOR 4.7uF 50V MC103 QETN1EM-476Z E CAPACITOR 47uF 25V MC104 NCB31HK-472X C CAPACITOR 4700pF 50V KC105 NCB31HK-472X C CAPACITOR 4700pF 50V KC106 NCB31HK-472X C CAPACITOR 4700pF 50V KC107 NCB31HK-472X C CAPACITOR 4700pF 50V KC109 NCB31HK-472X C CAPACITOR 4700pF 50V KC110 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JC112 QETN1EM-476Z E CAPACITOR 47uF 25V MC113 NCB31HK-472X C CAPACITOR 4700pF 50V KC114 NCB31HK-103X C CAPACITOR 0.01uF 50V KC115 NCB31HK-103X C CAPACITOR 0.01uF 50V KC116 NCB31HK-103X C CAPACITOR 0.01uF 50V KC117 QFVF1HJ-224Z MF CAPACITOR 0.22uF 50V JC119 QETN1HM-474Z E CAPACITOR 0.47uF 50V MC120 NDC31HJ-121X C CAPACITOR 120pF 50V JC121 NCB31HK-103X C CAPACITOR 0.01uF 50V KC122 NCB31HK-103X C CAPACITOR 0.01uF 50V KC161 NCB31HK-103X C CAPACITOR 0.01uF 50V KC162 NCB31HK-152X C CAPACITOR 1500pF 50V KC164 NCB31HK-103X C CAPACITOR 0.01uF 50V KC165 NCB31HK-103X C CAPACITOR 0.01uF 50V KC166 NCB31HK-104X C CAPACITOR 0.1uF 50V KC301 NCB31HK-681X C CAPACITOR 680pF 50V KC302 QETN1HM-475Z E CAPACITOR 4.7uF 50V MC303 NDC31HJ-100X C CAPACITOR 10pF 50V JC304 QFVF1HJ-474Z MF CAPACITOR 0.47uF 50V JC305 QETN1HM-474Z E CAPACITOR 0.47uF 50V MC306 NCB31HK-103X C CAPACITOR 0.01uF 50V KC307 QETN1CM-477Z E CAPACITOR 470uF 16V MC308 QETN1CM-107Z E CAPACITOR 100uF 16V MC309 NCB31HK-103X C CAPACITOR 0.01uF 50V KC310 NDC31HJ-221X C CAPACITOR 220pF 50V JC311 NCB31HK-103X C CAPACITOR 0.01uF 50V KC312 QENC1HM-474Z BP E CAPACITOR 0.47uF 50V MC313 QETN1HM-335Z E CAPACITOR 3.3uF 50V MC314 NCB31HK-103X C CAPACITOR 0.01uF 50V KC315 QETN1CM-107Z E CAPACITOR 100uF 16V MC316 QETN1HM-106Z E CAPACITOR 10uF 50V MC317 NCB31EK-473X C CAPACITOR 0.047uF 25V KC321 NDC31HJ-120X C CAPACITOR 12pF 50V JC322 NCB31EK-273X C CAPACITOR 0.027uF 25V KC323 QETN1HM-474Z E CAPACITOR 0.47uF 50V MC324 QETN1HM-106Z E CAPACITOR 10uF 50V MC325 QENC1HM-106Z BP E CAPACITOR 10uF 50V MC326 NCS21HJ-221X C CAPACITOR 220pF 50V JC341 QETN1HM-106Z E CAPACITOR 10uF 50V MC352 QFZ0097-103 MM CAPACITOR 0.01uF 1250V KC354 NDC31HJ-271X C CAPACITOR 270pF 50V JC355 NDC31HJ-221X C CAPACITOR 220pF 50V JC356 NDC31HJ-331X C CAPACITOR 330pF 50V JC357 QETN1AM-477Z E CAPACITOR 470uF 10V MC365 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC366 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC367 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC401 QFVF1HJ-474Z MF CAPACITOR 0.47uF 50V JC423 QCS32HJ-180Z C CAPACITOR 18pF 500V JC424 QFLC2AJ-103Z M CAPACITOR 0.01uF 100V JC426 QCB32HK-331Z C CAPACITOR 330pF 500V KC427 QETN1VM-107Z E CAPACITOR 100uF 35V MC428 QETN1VM-107Z E CAPACITOR 100uF 35V MC429 QETN1HM-106Z E CAPACITOR 10uF 50V MC430 QFN32AJ-472Z M CAPACITOR 4700pF 100V JC433 QEHR1HM-475Z E CAPACITOR 4.7uF 50V MC435 QETM1EM-228 E CAPACITOR 2200uF 25V MC436 QFVF1HJ-334Z MF CAPACITOR 0.33uF 50V JC437 NCB31HK-104X C CAPACITOR 0.1uF 50V KC501 QETN1EM-476Z E CAPACITOR 47uF 25V MC502 NCB31HK-103X C CAPACITOR 0.01uF 50V KC503 QETN1HM-106Z E CAPACITOR 10uF 50V MC523 QETN1EM-476Z E CAPACITOR 47uF 25V MC525 QFZ0200-802 MPP CAPACITOR 8000pF 1.5kV HC526 QFLC1HJ-103Z M CAPACITOR 0.01uF 50V JC527 QFZ0197-684 MPP CAPACITOR 0.68uF 250V JC529 QFN32AJ-102Z M CAPACITOR 1000pF 100V JC531 QEZ0203-107 E CAPACITOR 100uF 160V MC552 QETM1VM-108 E CAPACITOR 1000uF 35V MC554 QETN2EM-475Z E CAPACITOR 4.7uF 250V MC555 QFLC2AJ-104Z M CAPACITOR 0.1uF 100V J


(No.YA391)3-17

C571 QETN1AM-107Z E CAPACITOR 100uF 10V MC572 QETN1EM-476Z E CAPACITOR 47uF 25V MC581 QFVF1HJ-104Z MF CAPACITOR 0.1uF 50V JC652 NCB31HK-473X C CAPACITOR 0.047uF 50V KC653 QETN1HM-106Z E CAPACITOR 10uF 50V MC654 QETN1CM-477Z E CAPACITOR 470uF 16V MC655 QETN1HM-106Z E CAPACITOR 10uF 50V MC656 QENC1HM-105Z BP E CAPACITOR 1uF 50V MC657 QETN1EM-107Z E CAPACITOR 100uF 25V MC658 QETN1EM-227Z E CAPACITOR 220uF 25V MC659 QETN1HM-475Z E CAPACITOR 4.7uF 50V MC663 NCB31HK-102X C CAPACITOR 1000pF 50V KC664 QETN1CM-107Z E CAPACITOR 100uF 16V MC665 NCB31HK-103X C CAPACITOR 0.01uF 50V KC705 QETN1CM-477Z E CAPACITOR 470uF 16V MC706 NCB31HK-104X C CAPACITOR 0.1uF 50V KC707 NCB31HK-103X C CAPACITOR 0.01uF 50V KC708 QETN1AM-108Z E CAPACITOR 1000uF 10V MC709 NCB31HK-103X C CAPACITOR 0.01uF 50V KC710 QETN1CM-107Z E CAPACITOR 100uF 16V MC711 NCB31HK-103X C CAPACITOR 0.01uF 50V KC712 NCB31HK-103X C CAPACITOR 0.01uF 50V KC713 NCB31HK-103X C CAPACITOR 0.01uF 50V KC716 NDC31HJ-181X C CAPACITOR 180pF 50V JC717 NDC31HJ-181X C CAPACITOR 180pF 50V JC718 NCB31HK-103X C CAPACITOR 0.01uF 50V KC719 QETN1HM-105Z E CAPACITOR 1uF 50V MC720 NCB31HK-103X C CAPACITOR 0.01uF 50V KC721 NCB31EK-333X C CAPACITOR 0.033uF 25V KC722 NDC31HJ-101X C CAPACITOR 100pF 50V JC724 NDC31HJ-560X C CAPACITOR 56pF 50V JC728 NDC31HJ-181X C CAPACITOR 180pF 50V JC729 NDC31HJ-181X C CAPACITOR 180pF 50V JC730 NCB31HK-103X C CAPACITOR 0.01uF 50V KC744 NCB31HK-103X C CAPACITOR 0.01uF 50V KC805 QETN1CM-227Z E CAPACITOR 220uF 16V MC806 QETN1CM-477Z E CAPACITOR 470uF 16V MC811 QETN1HM-106Z E CAPACITOR 10uF 50V MC841 NCB31HK-152X C CAPACITOR 1500pF 50V K





R002 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR003 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR004 NRSA63J-563X MG RESISTOR 56kΩ 1/16W JR102 NRSA63J-750X MG RESISTOR 75Ω 1/16W JR103 NRSA63J-100X MG RESISTOR 10Ω 1/16W JR109 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR110 NRSA63J-272X MG RESISTOR 2.7kΩ 1/16W JR111 NRSA63J-181X MG RESISTOR 180Ω 1/16W JR112 NRSA63J-220X MG RESISTOR 22Ω 1/16W JR113 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR114 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR115 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR117 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR118 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR120 NRSA63J-391X MG RESISTOR 390Ω 1/16W JR121 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR159 NRSA63J-184X MG RESISTOR 180kΩ 1/16W JR161 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J


R162 NRSA63J-122X MG RESISTOR 1.2kΩ 1/16W JR163 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR164 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR165 NRSA63J-220X MG RESISTOR 22Ω 1/16W JR166 NRSA63J-821X MG RESISTOR 820Ω 1/16W JR301 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR302 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR303 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR304 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR305 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR306 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR307 NRSA63J-122X MG RESISTOR 1.2kΩ 1/16W JR308 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR312 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR313 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR314 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR321 NRSA63J-152X MG RESISTOR 1.5kΩ 1/16W JR322 NRSA63J-272X MG RESISTOR 2.7kΩ 1/16W JR323 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR324 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR326 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR327 NRSA63J-475X MG RESISTOR 4.7MΩ 1/16W JR341 NRSA63J-332X MG RESISTOR 3.3kΩ 1/16W JR345 NRSA63J-151X MG RESISTOR 150Ω 1/16W JR346 NRSA63J-151X MG RESISTOR 150Ω 1/16W JR353 NRSA63J-151X MG RESISTOR 150Ω 1/16W JR354 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR355 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR356 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR357 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR358 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR359 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR360 QRZ0107-152Z C RESISTOR 1.5kΩ 1/2W KR361 QRZ0107-152Z C RESISTOR 1.5kΩ 1/2W KR362 QRZ0107-152Z C RESISTOR 1.5kΩ 1/2W KR363 QRL029J-123 OMF RESISTOR 12kΩ 2W JR364 QRL029J-123 OMF RESISTOR 12kΩ 2W JR365 QRL029J-123 OMF RESISTOR 12kΩ 2W JR366 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR367 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR368 NRSA63J-182X MG RESISTOR 1.8kΩ 1/16W JR374 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR401 NRSA02J-103X MG RESISTOR 10kΩ 1/10W JR421 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR423 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR424 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR425 NRSA63J-332X MG RESISTOR 3.3kΩ 1/16W JR426 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR429 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR430 NRSA63J-823X MG RESISTOR 82kΩ 1/16W JR431 NRSA02J-103X MG RESISTOR 10kΩ 1/10W JR432 QRE121J-3R9Y C RESISTOR 3.9Ω 1/2W JR433 QRE121J-3R9Y C RESISTOR 3.9Ω 1/2W JR436 NRSA63J-823X MG RESISTOR 82kΩ 1/16W JR440 QRG01GJ-221 OMF RESISTOR 220Ω 1W JR441 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W JR442 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR443 QRE121J-1R0Y C RESISTOR 1Ω 1/2W JR453 NRSA63J-272X MG RESISTOR 2.7kΩ 1/16W JR502 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W JR503 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR525 QRL029J-680 OMF RESISTOR 68Ω 2W JR526 QRE121J-271Y C RESISTOR 270Ω 1/2W JR529 QRL039J-221 OMF RESISTOR 220Ω 3W JR531 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR532 NRSA63J-102X MG RESISTOR 1kΩ 1/16W J

R551 QRX029J-R47 MF RESISTOR 0.47Ω 2W JR552 QRJ146J-2R2X UNF C RESISTOR 2.2Ω 1/4W JR554 QRE121J-681Y C RESISTOR 680Ω 1/2W JR571 QRE121J-272Y C RESISTOR 2.7kΩ 1/2W JR573 QRT029J-2R2 MF RESISTOR 2.2Ω 2W JR574 QRT029J-2R2 MF RESISTOR 2.2Ω 2W JR576 QRE121J-223Y C RESISTOR 22kΩ 1/2W JR577 NRSA63J-562X MG RESISTOR 5.6kΩ 1/16W JR578 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR581 QRE121J-182Y C RESISTOR 1.8kΩ 1/2W JR582 NRSA63J-273X MG RESISTOR 27kΩ 1/16W JR583 NRSA63J-393X MG RESISTOR 39kΩ 1/16W JR651 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR652 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR653 NRSA63J-331X MG RESISTOR 330Ω 1/16W JR654 NRSA63J-223X MG RESISTOR 22kΩ 1/16W JR655 NRSA63J-473X MG RESISTOR 47kΩ 1/16W JR656 NRSA63J-822X MG RESISTOR 8.2kΩ 1/16W JR657 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR658 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR659 QRE121J-4R7Y C RESISTOR 4.7Ω 1/2W J


3-18(No.YA391)

R660 NRSA63J-153X MG RESISTOR 15kΩ 1/16W JR661 QRE121J-271Y C RESISTOR 270Ω 1/2W JR662 QRE121J-271Y C RESISTOR 270Ω 1/2W JR664 NRSA63J-682X MG RESISTOR 6.8kΩ 1/16W JR665 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR666 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR667 QRE121J-101Y C RESISTOR 100Ω 1/2W JR668 QRT029J-5R6 MF RESISTOR 5.6Ω 2W JR706 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR707 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR708 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR709 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR710 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR711 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR712 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR713 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR714 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR715 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR716 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR718 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR719 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR720 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR721 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR723 QRL039J-270 OMF RESISTOR 27Ω 3W JR725 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR726 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR727 NRSA63J-153X MG RESISTOR 15kΩ 1/16W JR728 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR729 NRSA63J-102X MG RESISTOR 1kΩ 1/16W JR730 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR731 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR736 NRSA63J-823X MG RESISTOR 82kΩ 1/16W JR737 NRSA63J-104X MG RESISTOR 100kΩ 1/16W JR738 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR739 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR740 NRSA63J-392X MG RESISTOR 3.9kΩ 1/16W JR741 NRSA63J-561X MG RESISTOR 560Ω 1/16W JR742 NRSA63J-563X MG RESISTOR 56kΩ 1/16W JR746 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR748 NRSA63J-101X MG RESISTOR 100Ω 1/16W JR749 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR771 NRSA63J-821X MG RESISTOR 820Ω 1/16W JR772 NRSA63J-821X MG RESISTOR 820Ω 1/16W JR796 NRSA63J-103X MG RESISTOR 10kΩ 1/16W JR797 NRSA63J-153X MG RESISTOR 15kΩ 1/16W JR802 NRSA63J-750X MG RESISTOR 75Ω 1/16W JR806 QRE121J-271Y C RESISTOR 270Ω 1/2W JR807 NRSA63J-680X MG RESISTOR 68Ω 1/16W JR810 QRG01GJ-560 OMF RESISTOR 56Ω 1W JR811 NRSA63J-221X MG RESISTOR 220Ω 1/16W JR815 QRE121J-181Y C RESISTOR 180Ω 1/2W JR816 NRSA63J-681X MG RESISTOR 680Ω 1/16W JR817 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W JR901 QRF074K-4R7 UNF WW RESISTOR 4.7Ω 7W KR903 QRL029J-104 OMF RESISTOR 100kΩ 2W JR906 QRL029J-104 OMF RESISTOR 100kΩ 2W JR921 QRE121J-1R8Y C RESISTOR 1.8Ω 1/2W JR922 QRE121J-221Y C RESISTOR 220Ω 1/2W JR923 QRZ0237-R18 UNF WW RESISTOR 0.18Ω 3W JR924 NRSA63J-154X MG RESISTOR 150kΩ 1/16W JR925 NRSA63J-105X MG RESISTOR 1MΩ 1/16W JR928 QRL039J-683 OMF RESISTOR 68kΩ 3W JR933 QRE121J-4R7Y C RESISTOR 4.7Ω 1/2W JR934 NRSA63J-683X MG RESISTOR 68kΩ 1/16W JR935 QRE121J-392Y C RESISTOR 3.9kΩ 1/2W JR974 NRSA63J-222X MG RESISTOR 2.2kΩ 1/16W JR976 QRL029J-120 OMF RESISTOR 12Ω 2W JR977 QRE121J-122Y C RESISTOR 1.2kΩ 1/2W JR978 NRSA63J-473X MG RESISTOR 47kΩ 1/16W JR979 QRL039J-470 OMF RESISTOR 47Ω 3W JR980 QRL029J-183 OMF RESISTOR 18kΩ 2W J




CF161 QAX0642-001Z C FILTER 4.500MHzCP981 ICP-N50-T IC PROTECTOR 2.0ACP982 ICP-N75-T IC PROTECTOR 2.7A


F901 QMF51E2-3R15-S FUSE 3.15A AC250VJ002 QNN0384-001 PIN JACK VIDEO,AUDIO IN/OUT(REAR)J003 QNN0281-003 PIN JACK VIDEO IN(FRONT)J004 QNN0281-002 PIN JACK AUDIO IN(FRONT)J005 QNS0197-001 3.5 JACK HEADPHONEK351 QQR0621-002Z FERRITE BEADSK421 QQR1113-001Z FERRITE BEADSK901 QQR1113-001Z FERRITE BEADSK902 QQR1113-001Z FERRITE BEADSK941 QQR1113-001Z FERRITE BEADSK942 QQR1113-001Z FERRITE BEADSK943 QQR1113-001Z FERRITE BEADS


S901 QSW0750-001 PUSH SWITCH POWERSF102 QAX0731-001 SAW FILTERSF122 QAX0325-001 SAW FILTER




LC30114-001C-H LED HOLDER


(No.YA391)3-19

REMOTE CONTROL UNIT PARTS LIST (RM-C360GY-1H)

PACKING [AV-14A16, AV-14A16/A ,AV-14A16/L]

PACKING PARTS LIST [AV-14A16, AV-14A16/A ,AV-14A16/L]


R25-8567 BATTERY COVER

Ref.No. Part No. Part Name Description Local

1 GG10281-010A-H PACKING CASE 2 LC10166-003B-H CUSHION ASS'Y 4pcs in 1set 3 GG30097-002A-H POLY BAG 4 GG30096-001A-H POLY BAG 5 ------------ BATTERY AA/R6 1.5V(x2)

6 GGT0106-001A-H INST BOOK English 7 GGT0107-001A-H DIGEST MANUAL Chinese,Russian AV-14A16

8 CM36447-00A-H ROD ANTENNA 9 ------------ WARRANTY CARD BT-56016-1H AV-14A16A 10 ------------ WARRANTY CARD BT-56017-1H AV-14A16A 11 RM-C360GY-1H REMOCON UNIT 12 GG30147-001B-H CORNER LABEL 2pcs in 1set 13 GG40016-002A-H STICKER AV-14A16A

1

1213

2

3

11

2

4 5 6 7 8 9 10

12

3-20(No.YA391)

PACKING [AV-14FMG6B/G]

PACKING PARTS LIST [AV-14FMG6B/G] Ref.No. Part No. Part Name Description Local

1 LC12622-001A-H PACKING CASE 2 LC10833-002B-H CUSHION ASS'Y 4pcs in 1set 3 GG30097-002A-H POLY BAG 4 GG30096-001A-H POLY BAG 5 ------------ BATTERY AA/R6 1.5V(x2)

6 GGT0109-001A-H INST BOOK English 7 GGT0110-001A-H DIGEST MANUAL Arabic,French,Persian,Russian

8 CM36447-00A-H ROD ANTENNA 9 RM-C360GY-1H REMOCON UNIT 10 GG30147-001B-H CORNER LABEL 2pcs in 1set

9

2

310

10

2

1

4 5 6 7 8

Documents

diagramas.diagramasde.comdiagramas.diagramasde.com/televisores/jvc chassis cg4... · 2010-08-04 · 1-2 (No.YA391) SPECIFICATION Design and specifications are subject to change without