Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Chemical Feed Systems
ColeParmer.com/dealers
Complete, preassembled chemical feed package!● Shipped complete—install by simply
providing power and fluid connections
● All systems are mounted on a rigid PVC base and shipped with an injection quill and one pump service kit
● Each system pump service kit contains valve cartridges with O-rings, head, diaphragm, secondary O-ring, head screws and washers
● Calibration columns allow you to self-calibrate your flow rate
specifications & ordering information
● Injection quill injects corrosive chemicals at the center of the pipe—preventing damage to the pipe wall
● Double your system flow rate by running both pumps at the same time with the duplex pump systems
● Duplex chemical feed pump systems minimize downtime by providing a back-up pump should the primary pump fail
Call us at 847-549-7600
Need Something Specific?We can custom configure a system for you!
Please call our Application Specialists to configure a system for your application if these standard systems will not suffice.
Biocide or scale inhibition feed system 70791-40
Acid/base system70790-40
Manual control duplex pump system with duty standby
pump 70796-00
Selection! Solutions! Service!
International customers, for a list of dealers go online to www.coleparmer.com/dealersFind more great products like those
on this page, check out our 2005/06 Cole-Parmer® General Catalog. Contact your local dealers and request your copy today!
CONTACT INFORMATION
Distributed by:
Chemical Feed Systems continued...Specifications & Ordering Information
1335_GA
Systems come standard with Pulsafeeder®
metering pumps. For other metering pumps, please call our Application Specialists.
Call us at 847-549-7600
Max flow(GPH)
Maxpsi
115 VAC, 50/60 Hz 230 VAC, 50/60 HzCatalog number Catalog number
0.25 150 MK-70790-40 MK-70790-450.5 150 MK-70790-50 MK-70790-550.92 100 MK-70790-60 MK-70790-652.0 50 MK-70790-70 MK-70790-75
Specifications & Ordering Information for Acid/Base Systems
Wetted parts: PVC, PTFE, ceramic Dimensions: 17"L x 17"W x 24"H
Acid/Base Systems– What’s included: these systems include a Eutech® pH 2000 controller, Pulsafeeder® metering pump, plumbing connections, submersible pH probe, PVC injection quill, calibration column, and one pump service kit.
Max flow(GPH)
Maxpsi
115 VAC, 50/60 Hz 230 VAC, 50/60 HzCatalog number Catalog number
0.5 100 MK-70791-40 MK-70791-450.92 100 MK-70791-50 MK-70791-551.25 100 MK-70791-60 MK-70791-651.83 100 MK-70791-70 MK-70791-75
Specifications & Ordering Information for Biocide or Scale Inhibition Feed Systems
Wetted parts: PVC, PTFE, ceramic Dimensions: 17"L x 17"W x 24"H
Biocide/Scale Inhibition Feed Systems– What’s included: these programmable systems include a time-programmed, continuous-duty Pulsafeeder® metering pump with clear plastic cover, plumbing connections, PVC injection quill, calibration column, and one pump service kit.
Max flow(GPD)
Maxpsi
115 VAC, 50/60 Hz 230 VAC, 50/60 HzCatalog number Catalog number
12 80 MK-70796-00 MK-70796-5022 80 MK-70796-10 MK-70796-6030 80 MK-70796-20 MK-70796-7044 80 MK-70796-30 MK-70796-8094 100 MK-70796-40 MK-70796-90
Specifications & Ordering Information for Duplex Chemical Feed Pump Systems (Manual Control)
Wetted parts: PVC, PTFE, ceramic Dimensions: 36"L x 24"W x 30"H
Duplex Chemical Feed Pump Systems– Duty standby systems enable you to reduce downtime by simply closing the ball valves to the primary pump and opening the ball valves to the standby pump to maintain the flow of the system. What’s included: systems include two Pulsafeeder® metering pumps, an injection quill, control panel, ball valves, pressure relief valve, back pressure valve, calibration column and one pump service kit.