Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
CHIPPER SHREDDERCS7‑200H / CS7‑270H
CHIPPER SHREDDER
Take care of trees, yard debris, and green waste (hedge clippings, old plants and leaves) in your back yard, lifestyle block or farm. The TIGER Chipper Shredder is a versatile, easy to use all-in-one chipper shredder, that chips branches up to 70mm in diameter, and shreds green waste to a fine mulch. The cleverly designed, single diamond-shaped chute feeds easier, for simpler, more comfortable use.
DIAMOND-SHAPED CHUTE EASY TO MOVE EASY COLLECTION
Built strong for high performance. Built smarter for ease of use.
• Diamond-shaped feed chute for easier feeding
• Single infeed chute for BOTH chipping and shredding
• Up to 70mm branch capacity.
• Adjustable, raised output chute to direct your mulch to the wheel barrow, trailer or garden bed
• Large, comfortable, integrated handles for easy movement
• 11" Pneumatic wheels for increased manoeuvrability and transport around the property
TOUGH OUTDOOR EQUIPMENT FOR YOUR CHIPPING NEEDS
CHIPPER SHREDDER
Chipping and Shredding in a single chute
Double-edged chipper blades, shredder knives, and reversible anvil
Diamond shaped chute for easy feeding
Secondary angle on feed chute entry for smoother feeding of branches
Fixed gate for consistent, fine mulch
Raised exit chute
KEY FEATURES
Honda Powered Engines
CHIP SHRED
• Double-edged chipper blades and anvil for extended life of wearable parts
• Manufactured from tough abrasion and wear resistant tool steel
• Double-sided flail shredder knives for extended life of wearable parts
• Manufactured from long lasting hardened carbon steel
• High performance, reliable Honda engines (200cc and 270cc).
REDUCE AND RECYCLE
LOW MAINTENANCE
Two 80mm, offset blades chip branches up to 70mm in diameter, into smaller, manage-able sizes for faster composting.
Six double-edged shredder knives mulch green waste in the same chute. No unnec-essary separation of branch and green waste.
Two fixed gates hold garden waste in the cutting chamber, producing finer mulch for greater volume reduction and faster composting.
CHIPPER SHREDDERBuilt strong for high performance. Built smarter for ease of use.
1) Insert spring loaded draw bar into guide on base.
1) Insert the TIGER catcher door into the Walker GHS Catcher box.
2) Lift the turntable locking pin and rotate the TIGER Chipper Shredder a quarter turn, and adjust the output chute height to the correct position.
3) Start collecting your garden waste for removal.
2) Turn until it clicks. 3) Connect to your mower and go.
ACCESSORIESREMOVABLE DRAW BAR KIT
Tool-free installation and removal. Just insert, twist and go!
TIGER TURNTABLE COLLECTION KIT FOR WALKER GHS MOWERS
Connect the TIGER turntable collection kit to the Walker mower, as with the Draw Bar Kit. Then simply rotate the TIGER Chipper Shredder a quarter turn, to collect the mulch into the Walker GHS Catcher box.
CHIPPER SHREDDER
A Division of Stevens Products Limited. 12 Andrew Baxter Drive, Airport Oaks, Auckland 2022, New Zealand.
Ph: (09) 275 0443 Email: [email protected]
SPECIFICATIONS
MODEL TIGER CS7-200H TIGER CS7-270H
Type 2-in-1 Chipper Shredder 2-in-1 Chipper Shredder
Chipping Capacity 70mm (3") 70mm (3”)
Dimensions (L x W x H) L 1165mm x H 1325mm x W 830mm L 1165mm x H 1325mm x W 830mm
Infeed chute opening 390mm x 390mm 390mm x 390mm
Chipper Blades 2 x Double Edge Tool Steel Blades 2 x Double Edge Tool Steel Blades
Shredder Knives 6 x Serrated Flail Blades 6 x Serrated Flail Blades
Feed system Gravity / Self Feed Gravity / Self Feed
Wheels 11" Pneumatic Wheels 11" Pneumatic Wheels
Engine Honda GX200 200cc (6.5HP) Engine Honda GX 270 270cc (8.5HP ) Engine
Fuel capacity / fuel type 3.1 Litres / 91 Unleaded 5.3 Litres / 91 Unleaded
Warranty
TIGER Chipper Shredder: 2 year domestic warranty
TIGER Chipper Shredder: 2 year domestic warranty
Honda Engine: 3 year warranty Honda Engine: 3 year warranty
ACCESSORIES
DESCRIPTION PART NUMBER
TIGER Turntable Collection Kit for Walker GHS Mowers (7 Bushel) 1470
TIGER Turntable Collection Kit for Walker GHS Mowers (10 Bushel) 1480
Lawn Tractor Draw Bar Kit 1460
WEARABLE PARTS
DESCRIPTION PART NUMBER
Belts AX21
Anvil 1419
Chipper Blades 70739
Shredder Knives 070 007 060