Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
4.77 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
1
55.00 g
d
MK3S +MMU2S
Summary
This is a chopping board holder slim made for boards less than 10mmthick. It makes much easyer to organize the board and in the same timegood place to let them dry after washing them.
Household > Kitchen
chopping holder board
Printed in PLA It does not need support or raft If you find it difficult to printit without warping it may be a good idea to make a brim. It works goodwith any layer height between 0.1mm and 0.2mm.
Alex
Chopping boardholder
VIEW IN BROWSER
updated 17. 2. 2020 | published 17. 2. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
8.6 MB
4.77 hrs f 0.20 mm k 0.40 mm h PLA 54.70 g d MK3S +MMU2S
updated 17. 2. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
124.2 KBupdated 17. 2. 2020
502.3 KBupdated 17. 2. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—No Derivates
✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
chopping-board-holder-slim_02mm_pla_mk3smmu2s_4.gco
chopping-board-holder-slim.3mf
chopping-board-holder-slim.stl