Choose Osmonics filters and you can be confident you’re removing impurities that affect plating quality For particulates, we offer SELEXF HYTREX@ and PURTREX’” depth filters to provide the exact level of purity you need. For organics, there’s our new double-duty duplex carbon filter (DCF). Whether you’re plating industrial parts or electronic components, no line of filters offers more. The right filter. Right now. Call (800) 848-1750. * 7 4 TM OSMONICS 5951 Clearwater Drive Minnetonka,MN 55343-8995 USA http://www.osmonics.com Circle 071 on reader information card Chromate Coating Overspray Collection A.J. Dralle Inc. Lemont, I//. Dralle’s new XFP-6000 System for the collection of aerospace chromate coating overspray meets and exceeds all EPA emission standards for aerospace manufacturing and rework fa- cilities by effectively eliminating dangerous chromium emissions up the stack. The 3-stage system can also be easily adapted to work within older, 2-stage paint-finishing lines. Coating Thickness Gauge Electfomafic Equipment Co. Inc., Check Line Div. Cedarhurst, N. Y The new Check-Line Series gauges accurately measure the thickness of paint, plating, and other coatings on all metal surfaces with a measuring range of 0.01 to 77.0 mils. The 977 Series includes Single Purpose models for use on ferrous or nonferrous surfaces and Dual Purpose models for use on all metal surfaces. They feature measuring resolution of 0.01 mil as well as user-selectable averag- ing of 2 to 99 measurements. A memory option is offered, which includes built-in memory for 26,000 data points, high/low alarm limits, and outputs for printers or computers. All models are supplied with a rugged probe on a 36-in. cable, bare test plate(s), and two plastic calibration shims. Circle 410 on the reader service card Blast Cabinets Empire Abrasive Equipment Corp. Langhome, Pa. Empire’s automated blast cabinets with cantilever turntables are capable of performing cleaning, peening, surface-profiling, and finishing opera- tions by impacting media, such as grit, shot, and plastics, on work- pieces to alter surface characteristics. Programmable controls provide mul- titasking and recall capabilities. Pa- rameters, such as nozzle/gun stroke length, oscillation rate, blast dura- 78 METAL FINISHING ?? APRIL 1997

Chromate coating overspray collection

Download PDF Report

Upload
haliem
View
213
Download
0

Embed Size (px)

Citation preview

Page 1: Chromate coating overspray collection

Choose Osmonics filters and you can be confident you’re removing impurities that affect plating quality

For particulates, we offer SELEXF HYTREX@ and PURTREX’” depth filters to provide the exact level of purity you need.

For organics, there’s our new double-duty duplex carbon filter (DCF). Whether you’re plating industrial parts or electronic

components, no line of filters offers more.

The right filter. Right now. Call (800) 848-1750.

* 7 4 TM

OSMONICS

5951 Clearwater Drive Minnetonka, MN 55343-8995 USA http://www.osmonics.com

Circle 071 on reader information card

Chromate Coating Overspray Collection A.J. Dralle Inc. Lemont, I//.

Dralle’s new XFP-6000 System for the collection of aerospace chromate coating overspray meets and exceeds all EPA emission standards for aerospace manufacturing and rework fa- cilities by effectively eliminating dangerous chromium emissions up the stack. The 3-stage system can also be easily adapted to work within

older, 2-stage paint-finishing lines.

Coating Thickness Gauge Electfomafic Equipment Co. Inc., Check Line Div. Cedarhurst, N. Y

The new Check-Line Series gauges accurately measure the thickness of paint, plating, and other coatings on all metal surfaces with a measuring range of 0.01 to 77.0 mils. The 977 Series includes Single Purpose models for use on ferrous or nonferrous surfaces and Dual Purpose models for use on all metal surfaces. They feature measuring resolution of 0.01 mil as well as user-selectable averag- ing of 2 to 99 measurements. A memory option is offered, which includes built-in memory for 26,000 data points, high/low alarm limits, and outputs for printers or computers. All models are supplied with a rugged probe on a 36-in. cable, bare test plate(s), and two plastic calibration shims.

Circle 410 on the reader service card

Blast Cabinets Empire Abrasive Equipment Corp. Langhome, Pa.

Empire’s automated blast cabinets with cantilever turntables are capable of performing cleaning, peening, surface-profiling, and finishing opera- tions by impacting media, such as grit, shot, and plastics, on work- pieces to alter surface characteristics. Programmable controls provide mul- titasking and recall capabilities. Pa- rameters, such as nozzle/gun stroke length, oscillation rate, blast dura-

78 METAL FINISHING ?? APRIL 1997