Upload
jerome-stevenson
View
219
Download
0
Tags:
Embed Size (px)
Citation preview
Mitigation, Damage limitation & Triage
Mitigation - means ‘making (something bad) less severe’
Damage Limitation - means ‘to take action to limit the damaging effects of an accident or error’
Triage - means ‘the process of determining the most important people or things from amongst a large number that require attention’
What need to consider to be of real benefit ?
Safety
Importance of time
Viability for restoration
Client’s priorities
Time !!
How soon do we receive the instruction after the incident.
Earliest opportunity even if policy cover has not been fully accepted
How soon after do we assess the damage (normally 24 - 48 hours)
Consider nature & extent of loss
Business profile & potential interruption
High net worth
Resources available - expertise in the specific field, surge situations
Delegated authority
This will allow instant response and potentially huge cost savings
On-site works
Prioritise site work, ensuring key areas or equipment are restored / protected / moved / relocated to avoid further damage
The importance of time…
0hrsStart of
the Incident
+70hrs (Mould forms
on organic based
materials)
+ 3hrs (Machinery starts to degrade
because of chloride based acids –
burning plastics)
+36hrs Odour problems start resulting from
bacteria formation
+24hrs (Standing water has
penetrated 12mm into concrete)
+ 6hrs (Electronics in PC’s & other
equipment starts to deteriorate)
+72 hrs
A swift, correct response can have a dramatic positive effect on minimising the loss
Measuring and Monitoring
Hand Held digital Hygrometer
Moisture Measuring Device
Thermal Imagining
Moisture Mapping
The Travel of the water
Horizontal or Vertical
Origin
Asbestos – Where can it be found
Piping
Textured coatings
Ceiling tiles
Fire proofing
Lagging
Fire blanket
Floor tiles
Brake pads
Roofing sheets
Asbestos – What can do for you?
Quickly respond
Assess
Sample
Protect
Rapid results
Remove
Provide certification
Disposal
Which Method to use then?
What are we trying to achieve?
What are the constraints?
What is the access like?
How “wet” is the building?
“Sledge Hammer to crack the Nut”
Types of Drying Equipment
Building Dryers
Dehumidifiers
Dessicant Dehumidifiers
Refrigerant Dehumidifiers
Speed Dryers
Air movers
Heated Air movers
Fans
Traditional Drying
“Conventional Drying system”
Usually consists of a combination of Refrigerant Dehumidifiers and Air movers.
The purpose of the Dehumidifier is to remove moisture from the affected area. The Air movers assist in this process by moving air around and preventing micro climates
Equipment readily available, widespread use, suitable for many different applications, easy to use.
Not effective at low temperatures
Typical Dessicant and airmovement system
Works in all environments
Needs external outlet (High level Window or Grill)
Performs better than refrigerant dehumidifier at low temperatures
Target or Enclosed drying
Use plastic sheeting or other material to reduce volume around wet area
Reduced volume, reduced amounts of equipment, reduced drying time.
Rapid Drying System
Significantly reduced drying times
Reduced stripping out work
Low Electrical consumption
Potential for massive savings on BI, AA, Loss of Rent and other policy elements
Other Applications (emergency heat etc)
Necessitates property vacation
Expertise in setup & monitoring
Cost - not for every job (work with restoration company project manager to determine viability)
Low Heat Dessicant type drying system
10000m3/h dry air. Mounted on a trailer, ideal for combating the initial chaos after massive water damages.
Good for use in “furnished” buildings
Remote Monitoring
Captures and records data
Can be accessed “remotely”
Saves time and cost
Transparency in the drying process