Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
1
91.1
KL
1 2 43
5 7 86
K 2 0 0 0 3 2 0 0 5 0L
1 3 4 5 6 7 82
M
032 = Ø32040 = Ø40050 = Ø50063 = Ø63
0025 = 250050 = 500075 = 75 0080 = 80 0100 = 100 0125 = 125
0320 = 3200350 = 3500400 = 4000450 = 4500500 = 5000600 = 600
080 = Ø80100 = Ø100125 = Ø125
0150 = 1500160 = 1600175 = 1750200 = 2000250 = 2500300 = 300
0700 = 7000800 = 8000900 = 9001000 = 1000
1 =2 =
00 =01 =60 =70 =
M = X =F =
G =
KL =
II 2Gc IIC T5 II 2Dc T100°C
CYLI
ND
ERS
Subject to change STANDARDS-BASED CYLINDERS
TECHNICAL CHARACTERISTICS
CONSTRUCTIVE CHARACTERISTICS
Working temperatureFluidWorking pressureBoresCushionings
End-capsBarrelPistonGuide slidePiston rod
Piston sealGuide bush for piston rodShock absorber sealsMagnet
- New design of the profi le for easier cleaning- Grooves for recessed sensors and connections on one side for easy installation- Traditional UNIVER technology to ensure strength and reliability- Dimensions complying with international standards for a full interchangeability
Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
-20 ÷ 80 °Cfi ltered air, with or without lubrication
1,5 ÷ 10 barØ 032 - 040 - 050 - 063 - 080 - 100 - 125 mm
adjustable in both sides
die-cast aluminium (painted)anodized aluminium
die-cast aluminiumacetalic resin
chromium-plated steel standard, stainless steel, rolled AISI 303
double-lip seal in nitrile rubber (NBR)UNIVER Original self-lubricating and self-aligning
nitrile rubber (NBR) in both sidesplasto-ferrite (standard supplied)
CODIFICATION KEY
D.A. = Double acting S.A. = Single acting
Series Type Bore (mm)
Stroke (mm)
Ø 32÷125 mm - ISO 15552Pneumatic cylinders
Versions with high temperature seals (Max 120°C) and version with low temperature seals (Max -40°C) available upon request
Option
Version
D.A. Standard versionD.A. Through piston rodS.A. Retracted piston rod Max stroke 50 mmS.A. Extended piston rod Max stroke 50 mm
Version
Stainless steel piston rodChromium-plated steel piston rod
Preset for locking unitreduced protrusionPreset for locking unitISO protrusion
Magnetic Atex option
Magnetic versionstandard supplied
Atex (upon request)
See ATEX Cataloguefor types and versions
Available ATEX version upon request
1
UNIVER GROUP
2
3
4
56
8
10
200
300
400
500600
800
1000
100
20 30 40 50 100 200 300 400 500 1000 20003000 5000
4000 10000 2000030000
4000050000
20 30 40 50 100 200 300 400 500
80
1000 20003000 5000
4000 10000 2000030000
4000050000
2000
12510063504032
32 (125)
20 (50/63)
16 (40)12 (32)
25 (80/100)
101.1
3240506380
100125
480710
11801740274039206830
gg gg2,053,064,284,917,208,00
12,40
130250440550970
11902200
0,91,62,52,53,93,96,3
Ø
3240506380
100125
550850
14402010319044607810
gg gg2,924,626,727,3611,011,8
18,53
190360640740
135015703050
1,83,24,94,97,67,6
12,4
Ø
mm Nm18242430303535
1,82,54,58
122136
3240506380
100125
Ø
80412561962311650247850
12266
69110561649280245337359
11462
161251393623
100515702453
322502785
1246201031404906
482754
11781869301447107359
643100515702493401962809812
80412561963311650247850
12266
138211330560907
14722294
276422660
1120181429444588
553844
13202240362958889176
69110551650280045367360
11470
414633990
1680272244166882
mm2 bar bar
3240506380
100125
Ø
2 4 6 8 102 4 6 8 10
3240506380
100125
+2 - 0+2 - 0+2 - 0
+2,5 - 0+2,5 - 0+2,5 - 0+4 - 0
+3,2 - 0+3,2 - 0+3,2 - 0+4 - 0+4 - 0+4 - 0+5 - 0
mm mm52709898
140140235
2842,548488080
175
3240506380
100125
Ø Ø
STANDARDS-BASED CYLINDERS Subject to change
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Mass - Standard cylinderCylinder - stroke 0 Increase per mm stroke Moving element - stroke 0 Increase per mm stroke
Mass- Through piston rod cylinderCylinder - stroke 0 Increase per mm stroke Moving element - stroke 0 Increase per mm stroke
Stroketolerances
Cushion
Length Max kinetic energy absorption
Theoretical forces (N)at diff erent working pressure (bar)
Surface area Working pressure Working pressure
TractionThrust Traction Thrust
Graph of theoretical forces/pressureand acceptable strokes depending on maximum peak load
Stro
ke (m
m)
Max peak load for bending (N)
Pres
sure
(bar
)
Theoretical force (N)
Max force Min. force
Single acting cylinderTheoretical forces (N) for return stroke
501 ≤ stroke ≤ 1000stroke ≤ 500 stroke 50 mm stroke 50 mm
1
UNIVER GROUP
19
18 19 20
19
111.1
1
2
3
4
5
7
9
6
10 11
12
13
14
18
22
8
15
16
16
17 14
15
16
21
16
16
16
13
20
KLF-14 _ _ _
KF-15 _ _ _KF-17 _ _ _
KF-24 _ _ _ KF-10 _ _ _ A KF-10 _ _ _ AS KF-19 _ _ _ CTAKF-19 _ _ _ KF-19 _ _ _ SC
KF-11 _ _ _KF-12 _ _ _KF-13 _ _ _KF-14 _ _ _ APKF-41 _ _ _
DF- _ _ _
L1-NJ12
DHF-0020100
KF-11 _ _ _ S
KF-22 _ _ _ KF-23 _ _ _
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18
20 21 22
DF-001
Subject to change
CYLI
ND
ERS
STANDARDS-BASED CYLINDERS
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Fixing elements and accessories
NOTE PART NO. Female fork with clips Articulated self-lubricating fork Fork with axially mounted articulated pin Fork with angle-mounted articulated pin Floating joint Female hinge (ISO MP2) with pin
Articulated counter-hinge (DIN648K)Articulated rear male hinge (ISO MP6)Rear male hinge (ISO MP4)Front - rear fl ange (ISO MF1-MF2)Angle bracket (ISO MS1)Front - rear hinge with fl oating pinSupport for hingesISO intermediate hinge (ISO MT4)DF magnetic sensor (see accessories section)
DHF covering strip (see accessories section)Locking unitSlide unit
DESCRIPTION
Narrow female hinge with pin (DIN648K)Counter-hinge 90° (CETOP RP107P) Counter-hinge 90°
Cable clamping for DF sensor (see accessories section)
1
UNIVER GROUP
A
121.1
3240506380
100125
22243232404054
G1/8G1/4G1/4G3/8G3/8G1/2G1/2
4,4568
7,59
11
17192424303041
6688
101012
146165180195220240290
30354045455560
5566778
16202626323545
M10x1,25M12x1,25M16x1,5M16x1,5M20x1,5M20x1,5M27x2
46,552
64,576,595
114140
16161718202024
32,538
46,556,57289
110
10131717222227
26303737465165
M6M6M8M8
M10M10M12
55,56688
10
94105106121128138160
±0,4±0,7±0,7±0,8±0,8±1±1
1416
15,517,520
20,520,5
±0,5±0,5±0,6±0,7±0,7±0,7±1,1
3,544444
5,5
12162020252532
+3,0-1,5
Ø M 1 2 ZMA EEØB PL VA ØMMBG E+0,5 KK I2 I3 RT SW TG WHI8 VD
KL160/260
KL170/270
KL100/200
KL101/201
+3,5-2,0
STANDARDS-BASED CYLINDERS Subject to change
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Double acting/Single acting
Z= Stroke
Double acting through piston rod
For extended rod version add WH+Z (stroke) dimensions
D.A. Standard
S.A. Retracted piston rod
S.A. Extended piston rod
D.A. Through piston rod
Pneumatic cushioning adjusting screw
1
UNIVER GROUP
L + Z1 + Z2
131.1
2
K 2 0 53 20A 0 M
1 3 4 5
1
K 22
5024
3 03
0B 705
06
M
1 4 62 3 5
032 = Ø32040 = Ø40050 = Ø50063 = Ø63
080 = Ø80100 = Ø100125 = Ø125
032 = Ø32040 = Ø40050 = Ø50063 = Ø63
080 = Ø80100 = Ø100125 = Ø125
EE
EE
Ø
Ø
3240506380
100125
3240506380
100125
G1/8G1/4G1/4G3/8G3/8G1/2G1/2
G1/8G1/4G3/8G3/8G1/2G1/2G1/2
S Max
S Max
3547699
3547699
L
L
166186172192208221248
169189175195211224251
1 2 43 5
L
1A =
2A =
1D =
2D =
1B =
2B =
L
Subject to change
CYLI
ND
ERS
STANDARDS-BASED CYLINDERS
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
KL = Ø 32÷125 mm - ISO 15552 Pneumatic cylinders Magnetic version standard supplied
M = Magnetic version (standard supplied)
KL = Ø 32÷125 mm - ISO 15552 Pneumatic cylinders Magnetic version standard supplied
M = Magnetic version (standard supplied)
Type Stroke (mm)Series MagneticBore (mm)
CODIFICATION KEY
Tandem cylinders are constructed using two pistons coupled together which provide double the force in forward movement compared to the traditional ISO cylinders of the same bore size.
CODIFICATION KEY
Series Stroke Z1 (mm) MagneticType Bore (mm) Stroke Z2 (mm)
Double thrust tandem only for forward movement, stainless steel piston rodDouble thrust tandem only for forward movement, chromium-plated steel piston rodDouble thrust tandem only for reverse movement, stainless steel piston rodDouble thrust tandem only for reverse movement, chromium-plated steel piston rod
Upon request
Two-position tandem, stainless steel
Two-position tandem, chromium-plated steel
Stroke of rear cylinder(upon request)
Stroke of head cylinder(upon request)
Z = Stroke
Z = Stroke
Two-position cylinders with two independent piston-rods which allow to realize a double positioning in which the thrust forces are the same as those of an ISO cylinder of the same bore size.
For all other dimensions please refer to the standard version.For other types of cylinders kindly contact our sales offi ce.
Two-position tandem version
Tandem version
1
UNIVER GROUP
141.1
K 2 3023 00C 50 0 M1 2 43 5 6
1 4 62 3 5
032 = Ø32040 = Ø40050 = Ø50063 = Ø63
080 = Ø80100 = Ø100125 = Ø125
1C =
2C =
L
Ø
Ø
L
I8
VL
VM
3240506380
100125
3240506380
100125
194220222252266288334
94105106121128138160
6101010101214
±0,4±0,7±0,7±0,8±0,8±1±1
485469698691
119
STANDARDS-BASED CYLINDERS Subject to change
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Z = Stroke
Z = Stroke
Series Stroke Z1 (mm) MagneticType Bore (mm) Stroke Z2 (mm)
CODIFICATION KEY
M = Magnetic version (standard supplied)
KL = Ø 32÷125 mm - ISO 15552 Pneumatic cylinders Magnetic version standard supplied
Opposed tandem, stainless steel
Opposed tandem, chromium-plated steel
Shorter stroke(upon request)
Longer stroke(upon request)
Opposed tandem version
With common piston rod tandem version (upon request)
Two coupled cylinders with common piston rodThe values of the thrust force are the same as those of the traditional cylinders . For all other dimensions please refer to the standard version. For other types of cylinders kindly contact our sales offi ce
Type of cylinder characterized by the coupling of two cylinders and whose piston rods move in opposite directions. The values of the thrust force are the same as those of the traditional cylinders.
1
UNIVER GROUP
151.1
CB E L MR UBCDH9
FLØ
3240506380
100125
26283240506070
14162121252537
10121216162025
4854657595
115140
22252732364150
12151520202530
11131317172126
4552607090
110130
± 0,2H14 min. Max h1475
110150270420765
1445
KF-10032AKF-10040AKF-10050AKF-10063AKF-10080AKF-10100AKF-10125A
XD
142160170190210230275
±1,25±1,25±1,25±1,6±1,6±1,6±2
g
3240506380
100125
10121616202030
4552657595
115140
22252732364150
10161621222730
10121418202225
34404551657597
68112196288566818
1706
KF-10032ASKF-10040ASKF-10050ASKF-10063ASKF-10080ASKF-10100ASKF-10125AS
142160170190210230275
±1,25±1,25±1,5±1,6±1,6±1,6±2
CB E L MR UBCDH9
FLر 0,2H14 min. Max h14
XDg
FLFFf8
FMØ
3240506380
100125
10121216162025
5361,369
80,5100,5122,5140
4653617191
111131
305050
120150290
1530
KF-18032KF-18040KF-18050KF-18063KF-18080KF-18100KF-18125
gA C E F G H L BD
H12 +0,5+0,3 0-0,5h13 f7 h11Ø
0-1
3240506380
100125
3444446
32,5384349637394
1,11,11,11,11,31,31,6
10121616202030
9,611,515,215,21919
28,6
4455667
414854607585
110
14162020242436
26428494
184208606
4,5666669
KF-18032SKF-18040SKF-18050SKF-18063SKF-18080SKF-18100SKF-18125S 0-2
Subject to change
CYLI
ND
ERS
STANDARDS-BASED CYLINDERS
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Female hinge (ISO MP2) with pin
Z = Stroke
Mass Part no.
Narrow female hinge with pin (DIN648K)
Mass Part no.
Z = Stroke
Pin for female hinge
Mass Part no.*
* = Pin for part no. KF-10...
Part no.Mass
Material:
Material:
Aluminium, zinc-plated steel pin
Aluminium, zinc-plated pin
Pin for narrow female hinge
Including 2 circlipsMaterial: Zinc-plated steel
Including circlipMaterial: Zinc-plated steel
1
UNIVER GROUP
161.1
CC DA DC DE DFCDH9
DBØ
3240506380
100125
4854657595
115140
10121216162030
1518202127
29,540
142160170190210230275
1416,517,521,5242830
10,5121215151825
14161621212537
100200300350
1600700
1410
KF-11032SKF-11040SKF-11050SKF-11063SKF-1 1080SKF-11100SKF-11125S
g
E MF TF UF WØFBH13
RØ
3240506380
100125
4552657595
115140
7999
121416
10101212161620
32364550637590
647290
100126150180
8090
110120150170205
16202525303545
200250500650
150022004100
KF-12032KF-12040KF-12050KF-12063KF-12080KF-12100KF-12125
± 0,2 MaxZF
±1,6±1,6±2±2±2±2
±2,5
gJS14 JS14130145155170190205245
±1,25±1,25±1,25±1,6±1,6±1,6±2
E L MR1CDH9
EWØ
3240506380
100125
10121216162025
4854657595
115140
-0,2 / -0,6-0,2 / -0,6-0,2 / -0,6-0,2 / -0,6-0,2 / -0,6-0,2 / -0,6-0,5 / -1,2
12151520202530
15*18*20*23*27*
29,5*26
min.XD
142160170190210230275
±1,25±1,25±1,25±1,6±1,6±1,6±2
80100170250420660
1500
KF-11032KF-11040KF-11050KF-11063KF-11080KF-11100KF-11125
g26283240506070
STANDARDS-BASED CYLINDERS Subject to change
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Z = Stroke
Mass Part no.
Articulated rear male hinge (ISO MP6)
Z = Stroke
> Rear assembly > Front assembly
Front/rear fl ange (ISO MF1-MF2)
Mass Part no.
Aluminium
Zinc-plated steelMaterial:
Rear male hinge (ISO MP4)
* = Non-standard dimension
Z = Stroke
Mass Part no.
AluminiumMaterial:
Material:
1
UNIVER GROUP
R
171.1
AO AU E SAAHJS15
ATØ
3240506380
100125
32364550637190
68
1012152015
4455668
24283232414145
4552647494
114140
142161170185210220250
5580
146175390525
1040
KF-13032KF-13040KF-13050KF-13063KF-13080KF-13100KF-13125
±0,2TR
±1,25±1,25±1,25±1,6±1,6±1,6±2
gØAB
7999
121416
H13 JS1432364550637590
XA
144163175190215230270
±1,25±1,25±1,25±1,6±1,6±1,6±2
L1 TD TL TMEBmin.
RØ
3240506380
100125
6472798897
109126
222222
27,527,53333
0,50,50,51
1,511
12161620202525
12161620202525
50637590
110132160
e9XV
657595
105130145175
EA
8293
101107123131164
Max73
82,590
97,5110120145
±2±2±2±2±2±2
±2,5
20,234,853
79,2118,6179,2251,2
KLF-14032KLF-14040KLF-14050KLF-14063KLF-14080KLF-14100KLF-14125
g
g
h14UW
h14
AH AF AN AALMax e9 h14
AGØ
3240506380
100125
14191924242932
12161620202525
12161620202525
50637590
110132160
303540454555
133
32,538
46,556,57289
110
h14F G
6,599
11,511,514-
AE
46596984
102125155
Max6,56,58,58,5
10,510,513,5
H13 H13-
10,513,513,516,516,520
6688
101012
11,61,61,61,622
137385513
1041156730002400
KF-14032APKF-14040APKF-14050APKF-14063APKF-14080APKF-14100APKF-14125AP
h11B
±0,2 +0,2 0 +0,5 0 0+0,3L R
Subject to change
CYLI
ND
ERS
STANDARDS-BASED CYLINDERS
Z = Stroke
Mass Part no.
Angle bracket (ISO MS1)
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
The dimension XV + 1/2 indicates the position of the hinge between the end-caps of the cylinder
Z = Stroke
Mass Part no.
ISO intermediate hinge (ISO MT4)
Front/rear hinge with fl oating pin
Mass Part no.
Zinc-plated steel
Zinc-plated steel
Zinc-plated steel
Material:
Material:
Material:
1
UNIVER GROUP
181.1
FA FC FD FECDH9
FBØg
FH FI F1 F2
3240506380
100
101212161620
323645506373
101212161620
1,22,60,33,31,02,5
32,538
46,556,57289
46,551,563,573,593
113
90120200320580910
KF-19032KF-19040KF-19050KF-19063KF-19080KF-19100
999
10,51213
6,46,48,48,4
10,510,5
5,55,555
4,54,5
10,510,513,513,516,516,5
BQ
262832405060
-0,2-0,6
3240506380
100125
6,66,699
111114
11111515181820
38415052667694
21243337475570
8101214141720
32364550637190
31354550607090
18223035405060
10,510,510,510,510,510,510,5
515465678696
124
10151616202030
20222630303845
1,61,61,61,62,52,53,2
10121216162025
3333333
26283240506070 -0,5-1,2
KF-19032CTAKF-19040CTAKF-19050CTAKF-19063CTAKF-19080CTAKF-19100CTAKF-19125CTA
Ø QH13 H13 JS14 JS14 JS15 JS14 Max Max Max H9Max +0,5/0 +0,5/0 gMax
M BG BH BI BL BM BN BO BS BR T G S F BQ
-0,2-0,6
56139142200321656826
STANDARDS-BASED CYLINDERS Subject to change
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Counter hinge 90° (CETOP RP107P)
Mass Part no.
Aluminium
Mass Part no.
Counter hinge 90°
AluminiumMaterial:
Material:
1
UNIVER GROUP
KK
ØB
AMH1VD
ØM
M
U
KK
AMWHVDE
FTGM
DDTGN
O
P
ØB
ØM
M
U
S1 S2
191.1
KF-41032KF-41040050KF-41040050KF-41063080KF-41063080KF-41100125KF-41100125
ØCR FN ØHB NHCH9
FKØ
3240506380
100125
10,5121213131616
12161620202525
15181820202525
30363640405050
6,699
11111414
1821212323
28,528,5
32363642425050
TH
799
11111313
11,61,61,61,622
718799
116136164192
86105117136156189217
100150150234234435435
±0,5±0,1±0,1f746555565657575
UL
11151518182020
ØU E f C1 C2
3240506380
100125
Ø QH13 H13 JS14 JS15 JS15 JS14 Max Max Max H7 H130/-0,1 +0,5/0Max
P BG BH BI BL BM BN BO EN ER BQ D H S F
6,66,699
1111
13,5
11111515181820
38415052667694
21243337475570
10101212141520
32364550637190
31354550607090
18223035405060
8,58,5
10,510,511,512,517
515465678696
124
14162121252537
15182023273040
10,5121515181825
10121616202030
20202020202020
3333333
178268458550970
13263000
KF-19032SCKF-19040SCKF-19050SCKF-19063SCKF-19080SCKF-19100SCKF-19125SC
g
g
AMØ3240506380
100125
22243232404054
B30354045455560
DDM6M6M8M8
M10M10M12
E54,55860657590
112,5
F8490
100110125152185
H116151717212635
KKM10 x 1,25M12 x 1,25M16 x 1,5M16 x 1,5M20 x 1,5M20 x 1,5M27 x 2
M50587085
100116145
MM12162020252532
N50587085
100116145
O29,529,52937
40,55962
P79,587,599
122140,5179207
S18590
100110125150185
S275758090
100125155
TG32,538
46,556,57289
110
U109
1013161822
VD666688
9,5
WH26303737465165
Subject to change
CYLI
ND
ERS
STANDARDS-BASED CYLINDERS
Mass
Mass
Part no.
Articulated counter hinge (DIN648K)
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Part no.
Hinge support
Aluminium
Material:
Material:
Locking unit for ISO cylinders Ø 32 ÷ 125
> ISO protrusion > Reduced protrusion
> Additional length to standard rod S1 for ISO protrusion S2 for reduced protrusion
Aluminium body and brass bushing
1
UNIVER GROUP
Ø
201.1
CE
40486480
110
CM
1012162030
ER
1619253245
L
2632405065
LE
2024324054
KK
M10x1,25M12x1,25M16x1,5M20x1,5M27x2
CL
2024324055
CK
1012162030
3240
50 - 6380 - 100
125
ØB12
90150340670
1790
KF-15032KF-15040KF-15050KF-15080KF-15125
3240
50 - 6380 - 100
125
Ø CH
1719223041
HB
43506477
110
HC
1416212537
HE
2022283351
HF
12,915,419,324,334,8
76110220400
1119
KF-17032KF-17040KF-17050KF-17080KF-17125
HD
1416212535
HA
1012162030
H7KK
M10x1,25M12x1,25M16x1,5M20 x 1,5
M27x2
α°
1313151417
-0,120
17192230-
M10x1,25M12x1,25M16x1,5M20x1,5
-
19,522
27,531,5
-
74,584
112133
-
35405063-
120185360570
-
KF-22025KF-22040KF-22050KF-22080
-
32364758-
30302215-
11171924-
3240
50 - 6380 - 100
125
15172325-
18202738-
CH KK IH IE IFIBIA°CH1±0,3
ID IG
110165330540
-
KF-23025KF-23040KF-23050KF-23080
-
3240
50 - 6380 - 100
125
Ø
17192230-
M10x1,25M12x1,25M16x1,5M20x1,5
-
1719
23,527-
21273340-
32364758-
50504032-
11171924-
15172325-
37426068-
50,557,579,590-
43506477-
57668499-
CH KK LA LCIBLG°CH1 ID±0,3
LB LD LE LF
CH KK MA MD MEMBIDCH1Ø
3240
50 - 6380 - 100
125
MC MF MG MH MI°
88668
1212202024
M10x1,25M12x1,25M16x1,5M20x1,5M27x2
5588
10
7175
103119147
1414222232
220230660700
2060
KF-24032KF-24040KF-24050KF-24080KF-24125
3535545460
7175
10311954
1919303054
2020324048
2222323257
3030414165
3232454570
510203080
KF-16032KF-16040KF-16050KF-16080KF-16125
Ø
3240
50 - 6380 - 100
125
1719243041
M10x1,25M12x1,25M16x1,5M20x1,5M27x2
6789
12
KVKK KW
STANDARDS-BASED CYLINDERS Subject to change
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Female fork with clips Articulated self-lubricating fork
Fork with axially mounted articulated pin Fork with angle mounted articulated pin
Floating joint Piston rod locknut
Massg
Part no. Massg
Part no.
Massg
Part no. Massg
Part no.
Massg
Part no.Massg
Part no.
Fork with pin suitable for piston rod according to ISO 8140 standard
Zinc-plated steel
Zinc-plated steel
Zinc-plated steel
Zinc-plated steel
Zinc-plated steel
Zinc-plated steel
Material:
Material:
Material:
Material:
Material:
Material:
1
UNIVER GROUP
211.1Subject to change
CYLI
ND
ERS
STANDARDS-BASED CYLINDERS
KL Ø 32 ÷ 125 mm - ISO 15552 Pneumatic cylinders
Slot positions for DF magnetic sensor
supply port
Supply port sidestandard
To the right ofsupply port sideupon request
Opposite to thesupply port sideupon request
To the left ofsupply port sideupon request
standard on all sides
Slot positions for DH magnetic sensor - K cylinder series